jaclang 0.6.1__py3-none-any.whl → 0.7.0__py3-none-any.whl

jaclang/vendor/mypy/typeshed/stdlib/tkinter/__init__.pyi

@@ -0,0 +1,3654 @@
+import _tkinter
+import sys
+from _typeshed import Incomplete, StrEnum, StrOrBytesPath
+from collections.abc import Callable, Mapping, Sequence
+from tkinter.constants import *
+from tkinter.font import _FontDescription
+from types import TracebackType
+from typing import Any, Generic, Literal, NamedTuple, TypedDict, TypeVar, overload, type_check_only
+from typing_extensions import TypeAlias, TypeVarTuple, Unpack, deprecated
+
+if sys.version_info >= (3, 9):
+    __all__ = [
+        "TclError",
+        "NO",
+        "FALSE",
+        "OFF",
+        "YES",
+        "TRUE",
+        "ON",
+        "N",
+        "S",
+        "W",
+        "E",
+        "NW",
+        "SW",
+        "NE",
+        "SE",
+        "NS",
+        "EW",
+        "NSEW",
+        "CENTER",
+        "NONE",
+        "X",
+        "Y",
+        "BOTH",
+        "LEFT",
+        "TOP",
+        "RIGHT",
+        "BOTTOM",
+        "RAISED",
+        "SUNKEN",
+        "FLAT",
+        "RIDGE",
+        "GROOVE",
+        "SOLID",
+        "HORIZONTAL",
+        "VERTICAL",
+        "NUMERIC",
+        "CHAR",
+        "WORD",
+        "BASELINE",
+        "INSIDE",
+        "OUTSIDE",
+        "SEL",
+        "SEL_FIRST",
+        "SEL_LAST",
+        "END",
+        "INSERT",
+        "CURRENT",
+        "ANCHOR",
+        "ALL",
+        "NORMAL",
+        "DISABLED",
+        "ACTIVE",
+        "HIDDEN",
+        "CASCADE",
+        "CHECKBUTTON",
+        "COMMAND",
+        "RADIOBUTTON",
+        "SEPARATOR",
+        "SINGLE",
+        "BROWSE",
+        "MULTIPLE",
+        "EXTENDED",
+        "DOTBOX",
+        "UNDERLINE",
+        "PIESLICE",
+        "CHORD",
+        "ARC",
+        "FIRST",
+        "LAST",
+        "BUTT",
+        "PROJECTING",
+        "ROUND",
+        "BEVEL",
+        "MITER",
+        "MOVETO",
+        "SCROLL",
+        "UNITS",
+        "PAGES",
+        "TkVersion",
+        "TclVersion",
+        "READABLE",
+        "WRITABLE",
+        "EXCEPTION",
+        "EventType",
+        "Event",
+        "NoDefaultRoot",
+        "Variable",
+        "StringVar",
+        "IntVar",
+        "DoubleVar",
+        "BooleanVar",
+        "mainloop",
+        "getint",
+        "getdouble",
+        "getboolean",
+        "Misc",
+        "CallWrapper",
+        "XView",
+        "YView",
+        "Wm",
+        "Tk",
+        "Tcl",
+        "Pack",
+        "Place",
+        "Grid",
+        "BaseWidget",
+        "Widget",
+        "Toplevel",
+        "Button",
+        "Canvas",
+        "Checkbutton",
+        "Entry",
+        "Frame",
+        "Label",
+        "Listbox",
+        "Menu",
+        "Menubutton",
+        "Message",
+        "Radiobutton",
+        "Scale",
+        "Scrollbar",
+        "Text",
+        "OptionMenu",
+        "Image",
+        "PhotoImage",
+        "BitmapImage",
+        "image_names",
+        "image_types",
+        "Spinbox",
+        "LabelFrame",
+        "PanedWindow",
+    ]
+
+# Using anything from tkinter.font in this file means that 'import tkinter'
+# seems to also load tkinter.font. That's not how it actually works, but
+# unfortunately not much can be done about it. https://github.com/python/typeshed/pull/4346
+
+TclError = _tkinter.TclError
+wantobjects: int
+TkVersion: float
+TclVersion: float
+READABLE = _tkinter.READABLE
+WRITABLE = _tkinter.WRITABLE
+EXCEPTION = _tkinter.EXCEPTION
+
+# Quick guide for figuring out which widget class to choose:
+#   - Misc: any widget (don't use BaseWidget because Tk doesn't inherit from BaseWidget)
+#   - Widget: anything that is meant to be put into another widget with e.g. pack or grid
+#
+# Don't trust tkinter's docstrings, because they have been created by copy/pasting from
+# Tk's manual pages more than 10 years ago. Use the latest manual pages instead:
+#
+#    $ sudo apt install tk-doc tcl-doc
+#    $ man 3tk label        # tkinter.Label
+#    $ man 3tk ttk_label    # tkinter.ttk.Label
+#    $ man 3tcl after       # tkinter.Misc.after
+#
+# You can also read the manual pages online: https://www.tcl.tk/doc/
+
+# Some widgets have an option named -compound that accepts different values
+# than the _Compound defined here. Many other options have similar things.
+_Anchor: TypeAlias = Literal["nw", "n", "ne", "w", "center", "e", "sw", "s", "se"]  # manual page: Tk_GetAnchor
+_ButtonCommand: TypeAlias = str | Callable[[], Any]  # accepts string of tcl code, return value is returned from Button.invoke()
+_Compound: TypeAlias = Literal["top", "left", "center", "right", "bottom", "none"]  # -compound in manual page named 'options'
+# manual page: Tk_GetCursor
+_Cursor: TypeAlias = str | tuple[str] | tuple[str, str] | tuple[str, str, str] | tuple[str, str, str, str]
+# example when it's sequence:  entry['invalidcommand'] = [entry.register(print), '%P']
+_EntryValidateCommand: TypeAlias = str | list[str] | tuple[str, ...] | Callable[[], bool]
+_ImageSpec: TypeAlias = _Image | str  # str can be from e.g. tkinter.image_names()
+_Relief: TypeAlias = Literal["raised", "sunken", "flat", "ridge", "solid", "groove"]  # manual page: Tk_GetRelief
+_ScreenUnits: TypeAlias = str | float  # Often the right type instead of int. Manual page: Tk_GetPixels
+# -xscrollcommand and -yscrollcommand in 'options' manual page
+_XYScrollCommand: TypeAlias = str | Callable[[float, float], object]
+_TakeFocusValue: TypeAlias = bool | Literal[0, 1, ""] | Callable[[str], bool | None]  # -takefocus in manual page named 'options'
+
+if sys.version_info >= (3, 11):
+    class _VersionInfoType(NamedTuple):
+        major: int
+        minor: int
+        micro: int
+        releaselevel: str
+        serial: int
+
+class EventType(StrEnum):
+    Activate: str
+    ButtonPress: str
+    Button = ButtonPress
+    ButtonRelease: str
+    Circulate: str
+    CirculateRequest: str
+    ClientMessage: str
+    Colormap: str
+    Configure: str
+    ConfigureRequest: str
+    Create: str
+    Deactivate: str
+    Destroy: str
+    Enter: str
+    Expose: str
+    FocusIn: str
+    FocusOut: str
+    GraphicsExpose: str
+    Gravity: str
+    KeyPress: str
+    Key = KeyPress
+    KeyRelease: str
+    Keymap: str
+    Leave: str
+    Map: str
+    MapRequest: str
+    Mapping: str
+    Motion: str
+    MouseWheel: str
+    NoExpose: str
+    Property: str
+    Reparent: str
+    ResizeRequest: str
+    Selection: str
+    SelectionClear: str
+    SelectionRequest: str
+    Unmap: str
+    VirtualEvent: str
+    Visibility: str
+
+_W = TypeVar("_W", bound=Misc)
+# Events considered covariant because you should never assign to event.widget.
+_W_co = TypeVar("_W_co", covariant=True, bound=Misc)
+
+class Event(Generic[_W_co]):
+    serial: int
+    num: int
+    focus: bool
+    height: int
+    width: int
+    keycode: int
+    state: int | str
+    time: int
+    x: int
+    y: int
+    x_root: int
+    y_root: int
+    char: str
+    send_event: bool
+    keysym: str
+    keysym_num: int
+    type: EventType
+    widget: _W_co
+    delta: int
+
+def NoDefaultRoot() -> None: ...
+
+class Variable:
+    def __init__(self, master: Misc | None = None, value: Incomplete | None = None, name: str | None = None) -> None: ...
+    def set(self, value) -> None: ...
+    initialize = set
+    def get(self): ...
+    def trace_add(self, mode: Literal["array", "read", "write", "unset"], callback: Callable[[str, str, str], object]) -> str: ...
+    def trace_remove(self, mode: Literal["array", "read", "write", "unset"], cbname: str) -> None: ...
+    def trace_info(self) -> list[tuple[tuple[Literal["array", "read", "write", "unset"], ...], str]]: ...
+    @deprecated("use trace_add() instead of trace()")
+    def trace(self, mode, callback): ...
+    @deprecated("use trace_add() instead of trace_variable()")
+    def trace_variable(self, mode, callback): ...
+    @deprecated("use trace_remove() instead of trace_vdelete()")
+    def trace_vdelete(self, mode, cbname) -> None: ...
+    @deprecated("use trace_info() instead of trace_vinfo()")
+    def trace_vinfo(self): ...
+    def __eq__(self, other: object) -> bool: ...
+    def __del__(self) -> None: ...
+
+class StringVar(Variable):
+    def __init__(self, master: Misc | None = None, value: str | None = None, name: str | None = None) -> None: ...
+    def set(self, value: str) -> None: ...
+    initialize = set
+    def get(self) -> str: ...
+
+class IntVar(Variable):
+    def __init__(self, master: Misc | None = None, value: int | None = None, name: str | None = None) -> None: ...
+    def set(self, value: int) -> None: ...
+    initialize = set
+    def get(self) -> int: ...
+
+class DoubleVar(Variable):
+    def __init__(self, master: Misc | None = None, value: float | None = None, name: str | None = None) -> None: ...
+    def set(self, value: float) -> None: ...
+    initialize = set
+    def get(self) -> float: ...
+
+class BooleanVar(Variable):
+    def __init__(self, master: Misc | None = None, value: bool | None = None, name: str | None = None) -> None: ...
+    def set(self, value: bool) -> None: ...
+    initialize = set
+    def get(self) -> bool: ...
+
+def mainloop(n: int = 0) -> None: ...
+
+getint: Incomplete
+getdouble: Incomplete
+
+def getboolean(s): ...
+
+_Ts = TypeVarTuple("_Ts")
+
+class _GridIndexInfo(TypedDict, total=False):
+    minsize: _ScreenUnits
+    pad: _ScreenUnits
+    uniform: str | None
+    weight: int
+
+class Misc:
+    master: Misc | None
+    tk: _tkinter.TkappType
+    children: dict[str, Widget]
+    def destroy(self) -> None: ...
+    def deletecommand(self, name: str) -> None: ...
+    def tk_strictMotif(self, boolean: Incomplete | None = None): ...
+    def tk_bisque(self) -> None: ...
+    def tk_setPalette(self, *args, **kw) -> None: ...
+    def wait_variable(self, name: str | Variable = "PY_VAR") -> None: ...
+    waitvar = wait_variable
+    def wait_window(self, window: Misc | None = None) -> None: ...
+    def wait_visibility(self, window: Misc | None = None) -> None: ...
+    def setvar(self, name: str = "PY_VAR", value: str = "1") -> None: ...
+    def getvar(self, name: str = "PY_VAR"): ...
+    def getint(self, s): ...
+    def getdouble(self, s): ...
+    def getboolean(self, s): ...
+    def focus_set(self) -> None: ...
+    focus = focus_set
+    def focus_force(self) -> None: ...
+    def focus_get(self) -> Misc | None: ...
+    def focus_displayof(self) -> Misc | None: ...
+    def focus_lastfor(self) -> Misc | None: ...
+    def tk_focusFollowsMouse(self) -> None: ...
+    def tk_focusNext(self) -> Misc | None: ...
+    def tk_focusPrev(self) -> Misc | None: ...
+    # .after() can be called without the "func" argument, but it is basically never what you want.
+    # It behaves like time.sleep() and freezes the GUI app.
+    def after(self, ms: int | Literal["idle"], func: Callable[[Unpack[_Ts]], object], *args: Unpack[_Ts]) -> str: ...
+    # after_idle is essentially partialmethod(after, "idle")
+    def after_idle(self, func: Callable[[Unpack[_Ts]], object], *args: Unpack[_Ts]) -> str: ...
+    def after_cancel(self, id: str) -> None: ...
+    def bell(self, displayof: Literal[0] | Misc | None = 0) -> None: ...
+    def clipboard_get(self, *, displayof: Misc = ..., type: str = ...) -> str: ...
+    def clipboard_clear(self, *, displayof: Misc = ...) -> None: ...
+    def clipboard_append(self, string: str, *, displayof: Misc = ..., format: str = ..., type: str = ...) -> None: ...
+    def grab_current(self): ...
+    def grab_release(self) -> None: ...
+    def grab_set(self) -> None: ...
+    def grab_set_global(self) -> None: ...
+    def grab_status(self) -> Literal["local", "global"] | None: ...
+    def option_add(
+        self, pattern, value, priority: int | Literal["widgetDefault", "startupFile", "userDefault", "interactive"] | None = None
+    ) -> None: ...
+    def option_clear(self) -> None: ...
+    def option_get(self, name, className): ...
+    def option_readfile(self, fileName, priority: Incomplete | None = None) -> None: ...
+    def selection_clear(self, **kw) -> None: ...
+    def selection_get(self, **kw): ...
+    def selection_handle(self, command, **kw) -> None: ...
+    def selection_own(self, **kw) -> None: ...
+    def selection_own_get(self, **kw): ...
+    def send(self, interp, cmd, *args): ...
+    def lower(self, belowThis: Incomplete | None = None) -> None: ...
+    def tkraise(self, aboveThis: Incomplete | None = None) -> None: ...
+    lift = tkraise
+    if sys.version_info >= (3, 11):
+        def info_patchlevel(self) -> _VersionInfoType: ...
+
+    def winfo_atom(self, name: str, displayof: Literal[0] | Misc | None = 0) -> int: ...
+    def winfo_atomname(self, id: int, displayof: Literal[0] | Misc | None = 0) -> str: ...
+    def winfo_cells(self) -> int: ...
+    def winfo_children(self) -> list[Widget]: ...  # Widget because it can't be Toplevel or Tk
+    def winfo_class(self) -> str: ...
+    def winfo_colormapfull(self) -> bool: ...
+    def winfo_containing(self, rootX: int, rootY: int, displayof: Literal[0] | Misc | None = 0) -> Misc | None: ...
+    def winfo_depth(self) -> int: ...
+    def winfo_exists(self) -> bool: ...
+    def winfo_fpixels(self, number: _ScreenUnits) -> float: ...
+    def winfo_geometry(self) -> str: ...
+    def winfo_height(self) -> int: ...
+    def winfo_id(self) -> int: ...
+    def winfo_interps(self, displayof: Literal[0] | Misc | None = 0) -> tuple[str, ...]: ...
+    def winfo_ismapped(self) -> bool: ...
+    def winfo_manager(self) -> str: ...
+    def winfo_name(self) -> str: ...
+    def winfo_parent(self) -> str: ...  # return value needs nametowidget()
+    def winfo_pathname(self, id: int, displayof: Literal[0] | Misc | None = 0): ...
+    def winfo_pixels(self, number: _ScreenUnits) -> int: ...
+    def winfo_pointerx(self) -> int: ...
+    def winfo_pointerxy(self) -> tuple[int, int]: ...
+    def winfo_pointery(self) -> int: ...
+    def winfo_reqheight(self) -> int: ...
+    def winfo_reqwidth(self) -> int: ...
+    def winfo_rgb(self, color: str) -> tuple[int, int, int]: ...
+    def winfo_rootx(self) -> int: ...
+    def winfo_rooty(self) -> int: ...
+    def winfo_screen(self) -> str: ...
+    def winfo_screencells(self) -> int: ...
+    def winfo_screendepth(self) -> int: ...
+    def winfo_screenheight(self) -> int: ...
+    def winfo_screenmmheight(self) -> int: ...
+    def winfo_screenmmwidth(self) -> int: ...
+    def winfo_screenvisual(self) -> str: ...
+    def winfo_screenwidth(self) -> int: ...
+    def winfo_server(self) -> str: ...
+    def winfo_toplevel(self) -> Tk | Toplevel: ...
+    def winfo_viewable(self) -> bool: ...
+    def winfo_visual(self) -> str: ...
+    def winfo_visualid(self) -> str: ...
+    def winfo_visualsavailable(self, includeids: bool = False) -> list[tuple[str, int]]: ...
+    def winfo_vrootheight(self) -> int: ...
+    def winfo_vrootwidth(self) -> int: ...
+    def winfo_vrootx(self) -> int: ...
+    def winfo_vrooty(self) -> int: ...
+    def winfo_width(self) -> int: ...
+    def winfo_x(self) -> int: ...
+    def winfo_y(self) -> int: ...
+    def update(self) -> None: ...
+    def update_idletasks(self) -> None: ...
+    @overload
+    def bindtags(self, tagList: None = None) -> tuple[str, ...]: ...
+    @overload
+    def bindtags(self, tagList: list[str] | tuple[str, ...]) -> None: ...
+    # bind with isinstance(func, str) doesn't return anything, but all other
+    # binds do. The default value of func is not str.
+    @overload
+    def bind(
+        self,
+        sequence: str | None = None,
+        func: Callable[[Event[Misc]], object] | None = None,
+        add: Literal["", "+"] | bool | None = None,
+    ) -> str: ...
+    @overload
+    def bind(self, sequence: str | None, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
+    @overload
+    def bind(self, *, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
+    # There's no way to know what type of widget bind_all and bind_class
+    # callbacks will get, so those are Misc.
+    @overload
+    def bind_all(
+        self,
+        sequence: str | None = None,
+        func: Callable[[Event[Misc]], object] | None = None,
+        add: Literal["", "+"] | bool | None = None,
+    ) -> str: ...
+    @overload
+    def bind_all(self, sequence: str | None, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
+    @overload
+    def bind_all(self, *, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
+    @overload
+    def bind_class(
+        self,
+        className: str,
+        sequence: str | None = None,
+        func: Callable[[Event[Misc]], object] | None = None,
+        add: Literal["", "+"] | bool | None = None,
+    ) -> str: ...
+    @overload
+    def bind_class(self, className: str, sequence: str | None, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
+    @overload
+    def bind_class(self, className: str, *, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
+    def unbind(self, sequence: str, funcid: str | None = None) -> None: ...
+    def unbind_all(self, sequence: str) -> None: ...
+    def unbind_class(self, className: str, sequence: str) -> None: ...
+    def mainloop(self, n: int = 0) -> None: ...
+    def quit(self) -> None: ...
+    @property
+    def _windowingsystem(self) -> Literal["win32", "aqua", "x11"]: ...
+    def nametowidget(self, name: str | Misc | _tkinter.Tcl_Obj) -> Any: ...
+    def register(
+        self, func: Callable[..., object], subst: Callable[..., Sequence[Any]] | None = None, needcleanup: int = 1
+    ) -> str: ...
+    def keys(self) -> list[str]: ...
+    @overload
+    def pack_propagate(self, flag: bool) -> bool | None: ...
+    @overload
+    def pack_propagate(self) -> None: ...
+    propagate = pack_propagate
+    def grid_anchor(self, anchor: _Anchor | None = None) -> None: ...
+    anchor = grid_anchor
+    @overload
+    def grid_bbox(
+        self, column: None = None, row: None = None, col2: None = None, row2: None = None
+    ) -> tuple[int, int, int, int] | None: ...
+    @overload
+    def grid_bbox(self, column: int, row: int, col2: None = None, row2: None = None) -> tuple[int, int, int, int] | None: ...
+    @overload
+    def grid_bbox(self, column: int, row: int, col2: int, row2: int) -> tuple[int, int, int, int] | None: ...
+    bbox = grid_bbox
+    def grid_columnconfigure(
+        self,
+        index: int | str | list[int] | tuple[int, ...],
+        cnf: _GridIndexInfo = {},
+        *,
+        minsize: _ScreenUnits = ...,
+        pad: _ScreenUnits = ...,
+        uniform: str = ...,
+        weight: int = ...,
+    ) -> _GridIndexInfo | Any: ...  # can be None but annoying to check
+    def grid_rowconfigure(
+        self,
+        index: int | str | list[int] | tuple[int, ...],
+        cnf: _GridIndexInfo = {},
+        *,
+        minsize: _ScreenUnits = ...,
+        pad: _ScreenUnits = ...,
+        uniform: str = ...,
+        weight: int = ...,
+    ) -> _GridIndexInfo | Any: ...  # can be None but annoying to check
+    columnconfigure = grid_columnconfigure
+    rowconfigure = grid_rowconfigure
+    def grid_location(self, x: _ScreenUnits, y: _ScreenUnits) -> tuple[int, int]: ...
+    @overload
+    def grid_propagate(self, flag: bool) -> None: ...
+    @overload
+    def grid_propagate(self) -> bool: ...
+    def grid_size(self) -> tuple[int, int]: ...
+    size = grid_size
+    # Widget because Toplevel or Tk is never a slave
+    def pack_slaves(self) -> list[Widget]: ...
+    def grid_slaves(self, row: int | None = None, column: int | None = None) -> list[Widget]: ...
+    def place_slaves(self) -> list[Widget]: ...
+    slaves = pack_slaves
+    def event_add(self, virtual: str, *sequences: str) -> None: ...
+    def event_delete(self, virtual: str, *sequences: str) -> None: ...
+    def event_generate(
+        self,
+        sequence: str,
+        *,
+        above: Misc | int = ...,
+        borderwidth: _ScreenUnits = ...,
+        button: int = ...,
+        count: int = ...,
+        data: Any = ...,  # anything with usable str() value
+        delta: int = ...,
+        detail: str = ...,
+        focus: bool = ...,
+        height: _ScreenUnits = ...,
+        keycode: int = ...,
+        keysym: str = ...,
+        mode: str = ...,
+        override: bool = ...,
+        place: Literal["PlaceOnTop", "PlaceOnBottom"] = ...,
+        root: Misc | int = ...,
+        rootx: _ScreenUnits = ...,
+        rooty: _ScreenUnits = ...,
+        sendevent: bool = ...,
+        serial: int = ...,
+        state: int | str = ...,
+        subwindow: Misc | int = ...,
+        time: int = ...,
+        warp: bool = ...,
+        width: _ScreenUnits = ...,
+        when: Literal["now", "tail", "head", "mark"] = ...,
+        x: _ScreenUnits = ...,
+        y: _ScreenUnits = ...,
+    ) -> None: ...
+    def event_info(self, virtual: str | None = None) -> tuple[str, ...]: ...
+    def image_names(self) -> tuple[str, ...]: ...
+    def image_types(self) -> tuple[str, ...]: ...
+    # See #4363 and #4891
+    def __setitem__(self, key: str, value: Any) -> None: ...
+    def __getitem__(self, key: str) -> Any: ...
+    def cget(self, key: str) -> Any: ...
+    def configure(self, cnf: Any = None) -> Any: ...
+    # TODO: config is an alias of configure, but adding that here creates lots of mypy errors
+
+class CallWrapper:
+    func: Incomplete
+    subst: Incomplete
+    widget: Incomplete
+    def __init__(self, func, subst, widget) -> None: ...
+    def __call__(self, *args): ...
+
+class XView:
+    @overload
+    def xview(self) -> tuple[float, float]: ...
+    @overload
+    def xview(self, *args): ...
+    def xview_moveto(self, fraction: float) -> None: ...
+    @overload
+    def xview_scroll(self, number: int, what: Literal["units", "pages"]) -> None: ...
+    @overload
+    def xview_scroll(self, number: _ScreenUnits, what: Literal["pixels"]) -> None: ...
+
+class YView:
+    @overload
+    def yview(self) -> tuple[float, float]: ...
+    @overload
+    def yview(self, *args): ...
+    def yview_moveto(self, fraction: float) -> None: ...
+    @overload
+    def yview_scroll(self, number: int, what: Literal["units", "pages"]) -> None: ...
+    @overload
+    def yview_scroll(self, number: _ScreenUnits, what: Literal["pixels"]) -> None: ...
+
+class Wm:
+    @overload
+    def wm_aspect(self, minNumer: int, minDenom: int, maxNumer: int, maxDenom: int) -> None: ...
+    @overload
+    def wm_aspect(
+        self, minNumer: None = None, minDenom: None = None, maxNumer: None = None, maxDenom: None = None
+    ) -> tuple[int, int, int, int] | None: ...
+    aspect = wm_aspect
+    @overload
+    def wm_attributes(self) -> tuple[Any, ...]: ...
+    @overload
+    def wm_attributes(self, option: str, /): ...
+    @overload
+    def wm_attributes(self, option: str, value, /, *__other_option_value_pairs: Any) -> None: ...
+    attributes = wm_attributes
+    def wm_client(self, name: str | None = None) -> str: ...
+    client = wm_client
+    @overload
+    def wm_colormapwindows(self) -> list[Misc]: ...
+    @overload
+    def wm_colormapwindows(self, wlist: list[Misc] | tuple[Misc, ...], /) -> None: ...
+    @overload
+    def wm_colormapwindows(self, first_wlist_item: Misc, /, *other_wlist_items: Misc) -> None: ...
+    colormapwindows = wm_colormapwindows
+    def wm_command(self, value: str | None = None) -> str: ...
+    command = wm_command
+    # Some of these always return empty string, but return type is set to None to prevent accidentally using it
+    def wm_deiconify(self) -> None: ...
+    deiconify = wm_deiconify
+    def wm_focusmodel(self, model: Literal["active", "passive"] | None = None) -> Literal["active", "passive", ""]: ...
+    focusmodel = wm_focusmodel
+    def wm_forget(self, window: Wm) -> None: ...
+    forget = wm_forget
+    def wm_frame(self) -> str: ...
+    frame = wm_frame
+    @overload
+    def wm_geometry(self, newGeometry: None = None) -> str: ...
+    @overload
+    def wm_geometry(self, newGeometry: str) -> None: ...
+    geometry = wm_geometry
+    def wm_grid(
+        self,
+        baseWidth: Incomplete | None = None,
+        baseHeight: Incomplete | None = None,
+        widthInc: Incomplete | None = None,
+        heightInc: Incomplete | None = None,
+    ): ...
+    grid = wm_grid
+    def wm_group(self, pathName: Incomplete | None = None): ...
+    group = wm_group
+    def wm_iconbitmap(self, bitmap: Incomplete | None = None, default: Incomplete | None = None): ...
+    iconbitmap = wm_iconbitmap
+    def wm_iconify(self) -> None: ...
+    iconify = wm_iconify
+    def wm_iconmask(self, bitmap: Incomplete | None = None): ...
+    iconmask = wm_iconmask
+    def wm_iconname(self, newName: Incomplete | None = None) -> str: ...
+    iconname = wm_iconname
+    def wm_iconphoto(self, default: bool, image1: _PhotoImageLike | str, /, *args: _PhotoImageLike | str) -> None: ...
+    iconphoto = wm_iconphoto
+    def wm_iconposition(self, x: int | None = None, y: int | None = None) -> tuple[int, int] | None: ...
+    iconposition = wm_iconposition
+    def wm_iconwindow(self, pathName: Incomplete | None = None): ...
+    iconwindow = wm_iconwindow
+    def wm_manage(self, widget) -> None: ...
+    manage = wm_manage
+    @overload
+    def wm_maxsize(self, width: None = None, height: None = None) -> tuple[int, int]: ...
+    @overload
+    def wm_maxsize(self, width: int, height: int) -> None: ...
+    maxsize = wm_maxsize
+    @overload
+    def wm_minsize(self, width: None = None, height: None = None) -> tuple[int, int]: ...
+    @overload
+    def wm_minsize(self, width: int, height: int) -> None: ...
+    minsize = wm_minsize
+    @overload
+    def wm_overrideredirect(self, boolean: None = None) -> bool | None: ...  # returns True or None
+    @overload
+    def wm_overrideredirect(self, boolean: bool) -> None: ...
+    overrideredirect = wm_overrideredirect
+    def wm_positionfrom(self, who: Literal["program", "user"] | None = None) -> Literal["", "program", "user"]: ...
+    positionfrom = wm_positionfrom
+    @overload
+    def wm_protocol(self, name: str, func: Callable[[], object] | str) -> None: ...
+    @overload
+    def wm_protocol(self, name: str, func: None = None) -> str: ...
+    @overload
+    def wm_protocol(self, name: None = None, func: None = None) -> tuple[str, ...]: ...
+    protocol = wm_protocol
+    @overload
+    def wm_resizable(self, width: None = None, height: None = None) -> tuple[bool, bool]: ...
+    @overload
+    def wm_resizable(self, width: bool, height: bool) -> None: ...
+    resizable = wm_resizable
+    def wm_sizefrom(self, who: Literal["program", "user"] | None = None) -> Literal["", "program", "user"]: ...
+    sizefrom = wm_sizefrom
+    @overload
+    def wm_state(self, newstate: None = None) -> str: ...
+    @overload
+    def wm_state(self, newstate: str) -> None: ...
+    state = wm_state
+    @overload
+    def wm_title(self, string: None = None) -> str: ...
+    @overload
+    def wm_title(self, string: str) -> None: ...
+    title = wm_title
+    @overload
+    def wm_transient(self, master: None = None) -> _tkinter.Tcl_Obj: ...
+    @overload
+    def wm_transient(self, master: Wm | _tkinter.Tcl_Obj) -> None: ...
+    transient = wm_transient
+    def wm_withdraw(self) -> None: ...
+    withdraw = wm_withdraw
+
+class Tk(Misc, Wm):
+    master: None
+    def __init__(
+        # Make sure to keep in sync with other functions that use the same
+        # args.
+        # use `git grep screenName` to find them
+        self,
+        screenName: str | None = None,
+        baseName: str | None = None,
+        className: str = "Tk",
+        useTk: bool = True,
+        sync: bool = False,
+        use: str | None = None,
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        cursor: _Cursor = ...,
+        height: _ScreenUnits = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        menu: Menu = ...,
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+        relief: _Relief = ...,
+        takefocus: _TakeFocusValue = ...,
+        width: _ScreenUnits = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+    def destroy(self) -> None: ...
+    def readprofile(self, baseName: str, className: str) -> None: ...
+    report_callback_exception: Callable[[type[BaseException], BaseException, TracebackType | None], object]
+    # Tk has __getattr__ so that tk_instance.foo falls back to tk_instance.tk.foo
+    # Please keep in sync with _tkinter.TkappType.
+    # Some methods are intentionally missing because they are inherited from Misc instead.
+    def adderrorinfo(self, msg, /): ...
+    def call(self, command: Any, /, *args: Any) -> Any: ...
+    def createcommand(self, name, func, /): ...
+    if sys.platform != "win32":
+        def createfilehandler(self, file, mask, func, /): ...
+        def deletefilehandler(self, file, /): ...
+
+    def createtimerhandler(self, milliseconds, func, /): ...
+    def dooneevent(self, flags: int = ..., /): ...
+    def eval(self, script: str, /) -> str: ...
+    def evalfile(self, fileName, /): ...
+    def exprboolean(self, s, /): ...
+    def exprdouble(self, s, /): ...
+    def exprlong(self, s, /): ...
+    def exprstring(self, s, /): ...
+    def globalgetvar(self, *args, **kwargs): ...
+    def globalsetvar(self, *args, **kwargs): ...
+    def globalunsetvar(self, *args, **kwargs): ...
+    def interpaddr(self): ...
+    def loadtk(self) -> None: ...
+    def record(self, script, /): ...
+    if sys.version_info < (3, 11):
+        def split(self, arg, /): ...
+
+    def splitlist(self, arg, /): ...
+    def unsetvar(self, *args, **kwargs): ...
+    def wantobjects(self, *args, **kwargs): ...
+    def willdispatch(self): ...
+
+def Tcl(screenName: str | None = None, baseName: str | None = None, className: str = "Tk", useTk: bool = False) -> Tk: ...
+
+_InMiscTotal = TypedDict("_InMiscTotal", {"in": Misc})
+_InMiscNonTotal = TypedDict("_InMiscNonTotal", {"in": Misc}, total=False)
+
+class _PackInfo(_InMiscTotal):
+    # 'before' and 'after' never appear in _PackInfo
+    anchor: _Anchor
+    expand: bool
+    fill: Literal["none", "x", "y", "both"]
+    side: Literal["left", "right", "top", "bottom"]
+    # Paddings come out as int or tuple of int, even though any _ScreenUnits
+    # can be specified in pack().
+    ipadx: int
+    ipady: int
+    padx: int | tuple[int, int]
+    pady: int | tuple[int, int]
+
+class Pack:
+    # _PackInfo is not the valid type for cnf because pad stuff accepts any
+    # _ScreenUnits instead of int only. I didn't bother to create another
+    # TypedDict for cnf because it appears to be a legacy thing that was
+    # replaced by **kwargs.
+    def pack_configure(
+        self,
+        cnf: Mapping[str, Any] | None = {},
+        *,
+        after: Misc = ...,
+        anchor: _Anchor = ...,
+        before: Misc = ...,
+        expand: bool | Literal[0, 1] = 0,
+        fill: Literal["none", "x", "y", "both"] = ...,
+        side: Literal["left", "right", "top", "bottom"] = ...,
+        ipadx: _ScreenUnits = ...,
+        ipady: _ScreenUnits = ...,
+        padx: _ScreenUnits | tuple[_ScreenUnits, _ScreenUnits] = ...,
+        pady: _ScreenUnits | tuple[_ScreenUnits, _ScreenUnits] = ...,
+        in_: Misc = ...,
+        **kw: Any,  # allow keyword argument named 'in', see #4836
+    ) -> None: ...
+    def pack_forget(self) -> None: ...
+    def pack_info(self) -> _PackInfo: ...  # errors if widget hasn't been packed
+    pack = pack_configure
+    forget = pack_forget
+    propagate = Misc.pack_propagate
+
+class _PlaceInfo(_InMiscNonTotal):  # empty dict if widget hasn't been placed
+    anchor: _Anchor
+    bordermode: Literal["inside", "outside", "ignore"]
+    width: str  # can be int()ed (even after e.g. widget.place(height='2.3c') or similar)
+    height: str  # can be int()ed
+    x: str  # can be int()ed
+    y: str  # can be int()ed
+    relheight: str  # can be float()ed if not empty string
+    relwidth: str  # can be float()ed if not empty string
+    relx: str  # can be float()ed if not empty string
+    rely: str  # can be float()ed if not empty string
+
+class Place:
+    def place_configure(
+        self,
+        cnf: Mapping[str, Any] | None = {},
+        *,
+        anchor: _Anchor = ...,
+        bordermode: Literal["inside", "outside", "ignore"] = ...,
+        width: _ScreenUnits = ...,
+        height: _ScreenUnits = ...,
+        x: _ScreenUnits = ...,
+        y: _ScreenUnits = ...,
+        # str allowed for compatibility with place_info()
+        relheight: str | float = ...,
+        relwidth: str | float = ...,
+        relx: str | float = ...,
+        rely: str | float = ...,
+        in_: Misc = ...,
+        **kw: Any,  # allow keyword argument named 'in', see #4836
+    ) -> None: ...
+    def place_forget(self) -> None: ...
+    def place_info(self) -> _PlaceInfo: ...
+    place = place_configure
+    info = place_info
+
+class _GridInfo(_InMiscNonTotal):  # empty dict if widget hasn't been gridded
+    column: int
+    columnspan: int
+    row: int
+    rowspan: int
+    ipadx: int
+    ipady: int
+    padx: int | tuple[int, int]
+    pady: int | tuple[int, int]
+    sticky: str  # consists of letters 'n', 's', 'w', 'e', no repeats, may be empty
+
+class Grid:
+    def grid_configure(
+        self,
+        cnf: Mapping[str, Any] | None = {},
+        *,
+        column: int = ...,
+        columnspan: int = ...,
+        row: int = ...,
+        rowspan: int = ...,
+        ipadx: _ScreenUnits = ...,
+        ipady: _ScreenUnits = ...,
+        padx: _ScreenUnits | tuple[_ScreenUnits, _ScreenUnits] = ...,
+        pady: _ScreenUnits | tuple[_ScreenUnits, _ScreenUnits] = ...,
+        sticky: str = ...,  # consists of letters 'n', 's', 'w', 'e', may contain repeats, may be empty
+        in_: Misc = ...,
+        **kw: Any,  # allow keyword argument named 'in', see #4836
+    ) -> None: ...
+    def grid_forget(self) -> None: ...
+    def grid_remove(self) -> None: ...
+    def grid_info(self) -> _GridInfo: ...
+    grid = grid_configure
+    location = Misc.grid_location
+    size = Misc.grid_size
+
+class BaseWidget(Misc):
+    master: Misc
+    widgetName: Incomplete
+    def __init__(self, master, widgetName, cnf={}, kw={}, extra=()) -> None: ...
+    def destroy(self) -> None: ...
+
+# This class represents any widget except Toplevel or Tk.
+class Widget(BaseWidget, Pack, Place, Grid):
+    # Allow bind callbacks to take e.g. Event[Label] instead of Event[Misc].
+    # Tk and Toplevel get notified for their child widgets' events, but other
+    # widgets don't.
+    @overload
+    def bind(
+        self: _W,
+        sequence: str | None = None,
+        func: Callable[[Event[_W]], object] | None = None,
+        add: Literal["", "+"] | bool | None = None,
+    ) -> str: ...
+    @overload
+    def bind(self, sequence: str | None, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
+    @overload
+    def bind(self, *, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
+
+class Toplevel(BaseWidget, Wm):
+    # Toplevel and Tk have the same options because they correspond to the same
+    # Tcl/Tk toplevel widget. For some reason, config and configure must be
+    # copy/pasted here instead of aliasing as 'config = Tk.config'.
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        background: str = ...,
+        bd: _ScreenUnits = 0,
+        bg: str = ...,
+        border: _ScreenUnits = 0,
+        borderwidth: _ScreenUnits = 0,
+        class_: str = "Toplevel",
+        colormap: Literal["new", ""] | Misc = "",
+        container: bool = False,
+        cursor: _Cursor = "",
+        height: _ScreenUnits = 0,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = 0,
+        menu: Menu = ...,
+        name: str = ...,
+        padx: _ScreenUnits = 0,
+        pady: _ScreenUnits = 0,
+        relief: _Relief = "flat",
+        screen: str = "",  # can't be changed after creating widget
+        takefocus: _TakeFocusValue = 0,
+        use: int = ...,
+        visual: str | tuple[str, int] = "",
+        width: _ScreenUnits = 0,
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        cursor: _Cursor = ...,
+        height: _ScreenUnits = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        menu: Menu = ...,
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+        relief: _Relief = ...,
+        takefocus: _TakeFocusValue = ...,
+        width: _ScreenUnits = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+
+class Button(Widget):
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        anchor: _Anchor = "center",
+        background: str = ...,
+        bd: _ScreenUnits = ...,  # same as borderwidth
+        bg: str = ...,  # same as background
+        bitmap: str = "",
+        border: _ScreenUnits = ...,  # same as borderwidth
+        borderwidth: _ScreenUnits = ...,
+        command: _ButtonCommand = "",
+        compound: _Compound = "none",
+        cursor: _Cursor = "",
+        default: Literal["normal", "active", "disabled"] = "disabled",
+        disabledforeground: str = ...,
+        fg: str = ...,  # same as foreground
+        font: _FontDescription = "TkDefaultFont",
+        foreground: str = ...,
+        # width and height must be int for buttons containing just text, but
+        # ints are also valid _ScreenUnits
+        height: _ScreenUnits = 0,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = 1,
+        image: _ImageSpec = "",
+        justify: Literal["left", "center", "right"] = "center",
+        name: str = ...,
+        overrelief: _Relief | Literal[""] = "",
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+        relief: _Relief = ...,
+        repeatdelay: int = ...,
+        repeatinterval: int = ...,
+        state: Literal["normal", "active", "disabled"] = "normal",
+        takefocus: _TakeFocusValue = "",
+        text: float | str = "",
+        # We allow the textvariable to be any Variable, not necessarily
+        # StringVar. This is useful for e.g. a button that displays the value
+        # of an IntVar.
+        textvariable: Variable = ...,
+        underline: int = -1,
+        width: _ScreenUnits = 0,
+        wraplength: _ScreenUnits = 0,
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        anchor: _Anchor = ...,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        bitmap: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        command: _ButtonCommand = ...,
+        compound: _Compound = ...,
+        cursor: _Cursor = ...,
+        default: Literal["normal", "active", "disabled"] = ...,
+        disabledforeground: str = ...,
+        fg: str = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        height: _ScreenUnits = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        image: _ImageSpec = ...,
+        justify: Literal["left", "center", "right"] = ...,
+        overrelief: _Relief | Literal[""] = ...,
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+        relief: _Relief = ...,
+        repeatdelay: int = ...,
+        repeatinterval: int = ...,
+        state: Literal["normal", "active", "disabled"] = ...,
+        takefocus: _TakeFocusValue = ...,
+        text: float | str = ...,
+        textvariable: Variable = ...,
+        underline: int = ...,
+        width: _ScreenUnits = ...,
+        wraplength: _ScreenUnits = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+    def flash(self) -> None: ...
+    def invoke(self) -> Any: ...
+
+class Canvas(Widget, XView, YView):
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        background: str = ...,
+        bd: _ScreenUnits = 0,
+        bg: str = ...,
+        border: _ScreenUnits = 0,
+        borderwidth: _ScreenUnits = 0,
+        closeenough: float = 1.0,
+        confine: bool = True,
+        cursor: _Cursor = "",
+        # canvas manual page has a section named COORDINATES, and the first
+        # part of it describes _ScreenUnits.
+        height: _ScreenUnits = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        insertbackground: str = ...,
+        insertborderwidth: _ScreenUnits = 0,
+        insertofftime: int = 300,
+        insertontime: int = 600,
+        insertwidth: _ScreenUnits = 2,
+        name: str = ...,
+        offset=...,  # undocumented
+        relief: _Relief = "flat",
+        # Setting scrollregion to None doesn't reset it back to empty,
+        # but setting it to () does.
+        scrollregion: tuple[_ScreenUnits, _ScreenUnits, _ScreenUnits, _ScreenUnits] | tuple[()] = (),
+        selectbackground: str = ...,
+        selectborderwidth: _ScreenUnits = 1,
+        selectforeground: str = ...,
+        # man page says that state can be 'hidden', but it can't
+        state: Literal["normal", "disabled"] = "normal",
+        takefocus: _TakeFocusValue = "",
+        width: _ScreenUnits = ...,
+        xscrollcommand: _XYScrollCommand = "",
+        xscrollincrement: _ScreenUnits = 0,
+        yscrollcommand: _XYScrollCommand = "",
+        yscrollincrement: _ScreenUnits = 0,
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        closeenough: float = ...,
+        confine: bool = ...,
+        cursor: _Cursor = ...,
+        height: _ScreenUnits = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        insertbackground: str = ...,
+        insertborderwidth: _ScreenUnits = ...,
+        insertofftime: int = ...,
+        insertontime: int = ...,
+        insertwidth: _ScreenUnits = ...,
+        offset=...,  # undocumented
+        relief: _Relief = ...,
+        scrollregion: tuple[_ScreenUnits, _ScreenUnits, _ScreenUnits, _ScreenUnits] | tuple[()] = ...,
+        selectbackground: str = ...,
+        selectborderwidth: _ScreenUnits = ...,
+        selectforeground: str = ...,
+        state: Literal["normal", "disabled"] = ...,
+        takefocus: _TakeFocusValue = ...,
+        width: _ScreenUnits = ...,
+        xscrollcommand: _XYScrollCommand = ...,
+        xscrollincrement: _ScreenUnits = ...,
+        yscrollcommand: _XYScrollCommand = ...,
+        yscrollincrement: _ScreenUnits = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+    def addtag(self, *args): ...  # internal method
+    def addtag_above(self, newtag: str, tagOrId: str | int) -> None: ...
+    def addtag_all(self, newtag: str) -> None: ...
+    def addtag_below(self, newtag: str, tagOrId: str | int) -> None: ...
+    def addtag_closest(
+        self, newtag: str, x: _ScreenUnits, y: _ScreenUnits, halo: _ScreenUnits | None = None, start: str | int | None = None
+    ) -> None: ...
+    def addtag_enclosed(self, newtag: str, x1: _ScreenUnits, y1: _ScreenUnits, x2: _ScreenUnits, y2: _ScreenUnits) -> None: ...
+    def addtag_overlapping(self, newtag: str, x1: _ScreenUnits, y1: _ScreenUnits, x2: _ScreenUnits, y2: _ScreenUnits) -> None: ...
+    def addtag_withtag(self, newtag: str, tagOrId: str | int) -> None: ...
+    def find(self, *args): ...  # internal method
+    def find_above(self, tagOrId: str | int) -> tuple[int, ...]: ...
+    def find_all(self) -> tuple[int, ...]: ...
+    def find_below(self, tagOrId: str | int) -> tuple[int, ...]: ...
+    def find_closest(
+        self, x: _ScreenUnits, y: _ScreenUnits, halo: _ScreenUnits | None = None, start: str | int | None = None
+    ) -> tuple[int, ...]: ...
+    def find_enclosed(self, x1: _ScreenUnits, y1: _ScreenUnits, x2: _ScreenUnits, y2: _ScreenUnits) -> tuple[int, ...]: ...
+    def find_overlapping(self, x1: _ScreenUnits, y1: _ScreenUnits, x2: _ScreenUnits, y2: float) -> tuple[int, ...]: ...
+    def find_withtag(self, tagOrId: str | int) -> tuple[int, ...]: ...
+    # Incompatible with Misc.bbox(), tkinter violates LSP
+    def bbox(self, *args: str | int) -> tuple[int, int, int, int]: ...  # type: ignore[override]
+    @overload
+    def tag_bind(
+        self,
+        tagOrId: str | int,
+        sequence: str | None = None,
+        func: Callable[[Event[Canvas]], object] | None = None,
+        add: Literal["", "+"] | bool | None = None,
+    ) -> str: ...
+    @overload
+    def tag_bind(
+        self, tagOrId: str | int, sequence: str | None, func: str, add: Literal["", "+"] | bool | None = None
+    ) -> None: ...
+    @overload
+    def tag_bind(self, tagOrId: str | int, *, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
+    def tag_unbind(self, tagOrId: str | int, sequence: str, funcid: str | None = None) -> None: ...
+    def canvasx(self, screenx, gridspacing: Incomplete | None = None): ...
+    def canvasy(self, screeny, gridspacing: Incomplete | None = None): ...
+    @overload
+    def coords(self, tagOrId: str | int, /) -> list[float]: ...
+    @overload
+    def coords(self, tagOrId: str | int, args: list[int] | list[float] | tuple[float, ...], /) -> None: ...
+    @overload
+    def coords(self, tagOrId: str | int, x1: float, y1: float, /, *args: float) -> None: ...
+    # create_foo() methods accept coords as a list or tuple, or as separate arguments.
+    # Lists and tuples can be flat as in [1, 2, 3, 4], or nested as in [(1, 2), (3, 4)].
+    # Keyword arguments should be the same in all overloads of each method.
+    def create_arc(self, *args, **kw) -> int: ...
+    def create_bitmap(self, *args, **kw) -> int: ...
+    def create_image(self, *args, **kw) -> int: ...
+    @overload
+    def create_line(
+        self,
+        x0: float,
+        y0: float,
+        x1: float,
+        y1: float,
+        /,
+        *,
+        activedash: str | int | list[int] | tuple[int, ...] = ...,
+        activefill: str = ...,
+        activestipple: str = ...,
+        activewidth: _ScreenUnits = ...,
+        arrow: Literal["first", "last", "both"] = ...,
+        arrowshape: tuple[float, float, float] = ...,
+        capstyle: Literal["round", "projecting", "butt"] = ...,
+        dash: str | int | list[int] | tuple[int, ...] = ...,
+        dashoffset: _ScreenUnits = ...,
+        disableddash: str | int | list[int] | tuple[int, ...] = ...,
+        disabledfill: str = ...,
+        disabledstipple: str = ...,
+        disabledwidth: _ScreenUnits = ...,
+        fill: str = ...,
+        joinstyle: Literal["round", "bevel", "miter"] = ...,
+        offset: _ScreenUnits = ...,
+        smooth: bool = ...,
+        splinesteps: float = ...,
+        state: Literal["normal", "hidden", "disabled"] = ...,
+        stipple: str = ...,
+        tags: str | list[str] | tuple[str, ...] = ...,
+        width: _ScreenUnits = ...,
+    ) -> int: ...
+    @overload
+    def create_line(
+        self,
+        xy_pair_0: tuple[float, float],
+        xy_pair_1: tuple[float, float],
+        /,
+        *,
+        activedash: str | int | list[int] | tuple[int, ...] = ...,
+        activefill: str = ...,
+        activestipple: str = ...,
+        activewidth: _ScreenUnits = ...,
+        arrow: Literal["first", "last", "both"] = ...,
+        arrowshape: tuple[float, float, float] = ...,
+        capstyle: Literal["round", "projecting", "butt"] = ...,
+        dash: str | int | list[int] | tuple[int, ...] = ...,
+        dashoffset: _ScreenUnits = ...,
+        disableddash: str | int | list[int] | tuple[int, ...] = ...,
+        disabledfill: str = ...,
+        disabledstipple: str = ...,
+        disabledwidth: _ScreenUnits = ...,
+        fill: str = ...,
+        joinstyle: Literal["round", "bevel", "miter"] = ...,
+        offset: _ScreenUnits = ...,
+        smooth: bool = ...,
+        splinesteps: float = ...,
+        state: Literal["normal", "hidden", "disabled"] = ...,
+        stipple: str = ...,
+        tags: str | list[str] | tuple[str, ...] = ...,
+        width: _ScreenUnits = ...,
+    ) -> int: ...
+    @overload
+    def create_line(
+        self,
+        coords: (
+            tuple[float, float, float, float]
+            | tuple[tuple[float, float], tuple[float, float]]
+            | list[int]
+            | list[float]
+            | list[tuple[int, int]]
+            | list[tuple[float, float]]
+        ),
+        /,
+        *,
+        activedash: str | int | list[int] | tuple[int, ...] = ...,
+        activefill: str = ...,
+        activestipple: str = ...,
+        activewidth: _ScreenUnits = ...,
+        arrow: Literal["first", "last", "both"] = ...,
+        arrowshape: tuple[float, float, float] = ...,
+        capstyle: Literal["round", "projecting", "butt"] = ...,
+        dash: str | int | list[int] | tuple[int, ...] = ...,
+        dashoffset: _ScreenUnits = ...,
+        disableddash: str | int | list[int] | tuple[int, ...] = ...,
+        disabledfill: str = ...,
+        disabledstipple: str = ...,
+        disabledwidth: _ScreenUnits = ...,
+        fill: str = ...,
+        joinstyle: Literal["round", "bevel", "miter"] = ...,
+        offset: _ScreenUnits = ...,
+        smooth: bool = ...,
+        splinesteps: float = ...,
+        state: Literal["normal", "hidden", "disabled"] = ...,
+        stipple: str = ...,
+        tags: str | list[str] | tuple[str, ...] = ...,
+        width: _ScreenUnits = ...,
+    ) -> int: ...
+    @overload
+    def create_oval(
+        self,
+        x0: float,
+        y0: float,
+        x1: float,
+        y1: float,
+        /,
+        *,
+        activedash: str | int | list[int] | tuple[int, ...] = ...,
+        activefill: str = ...,
+        activeoutline: str = ...,
+        activeoutlinestipple: str = ...,
+        activestipple: str = ...,
+        activewidth: _ScreenUnits = ...,
+        dash: str | int | list[int] | tuple[int, ...] = ...,
+        dashoffset: _ScreenUnits = ...,
+        disableddash: str | int | list[int] | tuple[int, ...] = ...,
+        disabledfill: str = ...,
+        disabledoutline: str = ...,
+        disabledoutlinestipple: str = ...,
+        disabledstipple: str = ...,
+        disabledwidth: _ScreenUnits = ...,
+        fill: str = ...,
+        offset: _ScreenUnits = ...,
+        outline: str = ...,
+        outlineoffset: _ScreenUnits = ...,
+        outlinestipple: str = ...,
+        state: Literal["normal", "hidden", "disabled"] = ...,
+        stipple: str = ...,
+        tags: str | list[str] | tuple[str, ...] = ...,
+        width: _ScreenUnits = ...,
+    ) -> int: ...
+    @overload
+    def create_oval(
+        self,
+        xy_pair_0: tuple[float, float],
+        xy_pair_1: tuple[float, float],
+        /,
+        *,
+        activedash: str | int | list[int] | tuple[int, ...] = ...,
+        activefill: str = ...,
+        activeoutline: str = ...,
+        activeoutlinestipple: str = ...,
+        activestipple: str = ...,
+        activewidth: _ScreenUnits = ...,
+        dash: str | int | list[int] | tuple[int, ...] = ...,
+        dashoffset: _ScreenUnits = ...,
+        disableddash: str | int | list[int] | tuple[int, ...] = ...,
+        disabledfill: str = ...,
+        disabledoutline: str = ...,
+        disabledoutlinestipple: str = ...,
+        disabledstipple: str = ...,
+        disabledwidth: _ScreenUnits = ...,
+        fill: str = ...,
+        offset: _ScreenUnits = ...,
+        outline: str = ...,
+        outlineoffset: _ScreenUnits = ...,
+        outlinestipple: str = ...,
+        state: Literal["normal", "hidden", "disabled"] = ...,
+        stipple: str = ...,
+        tags: str | list[str] | tuple[str, ...] = ...,
+        width: _ScreenUnits = ...,
+    ) -> int: ...
+    @overload
+    def create_oval(
+        self,
+        coords: (
+            tuple[float, float, float, float]
+            | tuple[tuple[float, float], tuple[float, float]]
+            | list[int]
+            | list[float]
+            | list[tuple[int, int]]
+            | list[tuple[float, float]]
+        ),
+        /,
+        *,
+        activedash: str | int | list[int] | tuple[int, ...] = ...,
+        activefill: str = ...,
+        activeoutline: str = ...,
+        activeoutlinestipple: str = ...,
+        activestipple: str = ...,
+        activewidth: _ScreenUnits = ...,
+        dash: str | int | list[int] | tuple[int, ...] = ...,
+        dashoffset: _ScreenUnits = ...,
+        disableddash: str | int | list[int] | tuple[int, ...] = ...,
+        disabledfill: str = ...,
+        disabledoutline: str = ...,
+        disabledoutlinestipple: str = ...,
+        disabledstipple: str = ...,
+        disabledwidth: _ScreenUnits = ...,
+        fill: str = ...,
+        offset: _ScreenUnits = ...,
+        outline: str = ...,
+        outlineoffset: _ScreenUnits = ...,
+        outlinestipple: str = ...,
+        state: Literal["normal", "hidden", "disabled"] = ...,
+        stipple: str = ...,
+        tags: str | list[str] | tuple[str, ...] = ...,
+        width: _ScreenUnits = ...,
+    ) -> int: ...
+    @overload
+    def create_polygon(
+        self,
+        x0: float,
+        y0: float,
+        x1: float,
+        y1: float,
+        /,
+        *xy_pairs: float,
+        activedash: str | int | list[int] | tuple[int, ...] = ...,
+        activefill: str = ...,
+        activeoutline: str = ...,
+        activeoutlinestipple: str = ...,
+        activestipple: str = ...,
+        activewidth: _ScreenUnits = ...,
+        dash: str | int | list[int] | tuple[int, ...] = ...,
+        dashoffset: _ScreenUnits = ...,
+        disableddash: str | int | list[int] | tuple[int, ...] = ...,
+        disabledfill: str = ...,
+        disabledoutline: str = ...,
+        disabledoutlinestipple: str = ...,
+        disabledstipple: str = ...,
+        disabledwidth: _ScreenUnits = ...,
+        fill: str = ...,
+        joinstyle: Literal["round", "bevel", "miter"] = ...,
+        offset: _ScreenUnits = ...,
+        outline: str = ...,
+        outlineoffset: _ScreenUnits = ...,
+        outlinestipple: str = ...,
+        smooth: bool = ...,
+        splinesteps: float = ...,
+        state: Literal["normal", "hidden", "disabled"] = ...,
+        stipple: str = ...,
+        tags: str | list[str] | tuple[str, ...] = ...,
+        width: _ScreenUnits = ...,
+    ) -> int: ...
+    @overload
+    def create_polygon(
+        self,
+        xy_pair_0: tuple[float, float],
+        xy_pair_1: tuple[float, float],
+        /,
+        *xy_pairs: tuple[float, float],
+        activedash: str | int | list[int] | tuple[int, ...] = ...,
+        activefill: str = ...,
+        activeoutline: str = ...,
+        activeoutlinestipple: str = ...,
+        activestipple: str = ...,
+        activewidth: _ScreenUnits = ...,
+        dash: str | int | list[int] | tuple[int, ...] = ...,
+        dashoffset: _ScreenUnits = ...,
+        disableddash: str | int | list[int] | tuple[int, ...] = ...,
+        disabledfill: str = ...,
+        disabledoutline: str = ...,
+        disabledoutlinestipple: str = ...,
+        disabledstipple: str = ...,
+        disabledwidth: _ScreenUnits = ...,
+        fill: str = ...,
+        joinstyle: Literal["round", "bevel", "miter"] = ...,
+        offset: _ScreenUnits = ...,
+        outline: str = ...,
+        outlineoffset: _ScreenUnits = ...,
+        outlinestipple: str = ...,
+        smooth: bool = ...,
+        splinesteps: float = ...,
+        state: Literal["normal", "hidden", "disabled"] = ...,
+        stipple: str = ...,
+        tags: str | list[str] | tuple[str, ...] = ...,
+        width: _ScreenUnits = ...,
+    ) -> int: ...
+    @overload
+    def create_polygon(
+        self,
+        coords: (
+            tuple[float, ...]
+            | tuple[tuple[float, float], ...]
+            | list[int]
+            | list[float]
+            | list[tuple[int, int]]
+            | list[tuple[float, float]]
+        ),
+        /,
+        *,
+        activedash: str | int | list[int] | tuple[int, ...] = ...,
+        activefill: str = ...,
+        activeoutline: str = ...,
+        activeoutlinestipple: str = ...,
+        activestipple: str = ...,
+        activewidth: _ScreenUnits = ...,
+        dash: str | int | list[int] | tuple[int, ...] = ...,
+        dashoffset: _ScreenUnits = ...,
+        disableddash: str | int | list[int] | tuple[int, ...] = ...,
+        disabledfill: str = ...,
+        disabledoutline: str = ...,
+        disabledoutlinestipple: str = ...,
+        disabledstipple: str = ...,
+        disabledwidth: _ScreenUnits = ...,
+        fill: str = ...,
+        joinstyle: Literal["round", "bevel", "miter"] = ...,
+        offset: _ScreenUnits = ...,
+        outline: str = ...,
+        outlineoffset: _ScreenUnits = ...,
+        outlinestipple: str = ...,
+        smooth: bool = ...,
+        splinesteps: float = ...,
+        state: Literal["normal", "hidden", "disabled"] = ...,
+        stipple: str = ...,
+        tags: str | list[str] | tuple[str, ...] = ...,
+        width: _ScreenUnits = ...,
+    ) -> int: ...
+    @overload
+    def create_rectangle(
+        self,
+        x0: float,
+        y0: float,
+        x1: float,
+        y1: float,
+        /,
+        *,
+        activedash: str | int | list[int] | tuple[int, ...] = ...,
+        activefill: str = ...,
+        activeoutline: str = ...,
+        activeoutlinestipple: str = ...,
+        activestipple: str = ...,
+        activewidth: _ScreenUnits = ...,
+        dash: str | int | list[int] | tuple[int, ...] = ...,
+        dashoffset: _ScreenUnits = ...,
+        disableddash: str | int | list[int] | tuple[int, ...] = ...,
+        disabledfill: str = ...,
+        disabledoutline: str = ...,
+        disabledoutlinestipple: str = ...,
+        disabledstipple: str = ...,
+        disabledwidth: _ScreenUnits = ...,
+        fill: str = ...,
+        offset: _ScreenUnits = ...,
+        outline: str = ...,
+        outlineoffset: _ScreenUnits = ...,
+        outlinestipple: str = ...,
+        state: Literal["normal", "hidden", "disabled"] = ...,
+        stipple: str = ...,
+        tags: str | list[str] | tuple[str, ...] = ...,
+        width: _ScreenUnits = ...,
+    ) -> int: ...
+    @overload
+    def create_rectangle(
+        self,
+        xy_pair_0: tuple[float, float],
+        xy_pair_1: tuple[float, float],
+        /,
+        *,
+        activedash: str | int | list[int] | tuple[int, ...] = ...,
+        activefill: str = ...,
+        activeoutline: str = ...,
+        activeoutlinestipple: str = ...,
+        activestipple: str = ...,
+        activewidth: _ScreenUnits = ...,
+        dash: str | int | list[int] | tuple[int, ...] = ...,
+        dashoffset: _ScreenUnits = ...,
+        disableddash: str | int | list[int] | tuple[int, ...] = ...,
+        disabledfill: str = ...,
+        disabledoutline: str = ...,
+        disabledoutlinestipple: str = ...,
+        disabledstipple: str = ...,
+        disabledwidth: _ScreenUnits = ...,
+        fill: str = ...,
+        offset: _ScreenUnits = ...,
+        outline: str = ...,
+        outlineoffset: _ScreenUnits = ...,
+        outlinestipple: str = ...,
+        state: Literal["normal", "hidden", "disabled"] = ...,
+        stipple: str = ...,
+        tags: str | list[str] | tuple[str, ...] = ...,
+        width: _ScreenUnits = ...,
+    ) -> int: ...
+    @overload
+    def create_rectangle(
+        self,
+        coords: (
+            tuple[float, float, float, float]
+            | tuple[tuple[float, float], tuple[float, float]]
+            | list[int]
+            | list[float]
+            | list[tuple[int, int]]
+            | list[tuple[float, float]]
+        ),
+        /,
+        *,
+        activedash: str | int | list[int] | tuple[int, ...] = ...,
+        activefill: str = ...,
+        activeoutline: str = ...,
+        activeoutlinestipple: str = ...,
+        activestipple: str = ...,
+        activewidth: _ScreenUnits = ...,
+        dash: str | int | list[int] | tuple[int, ...] = ...,
+        dashoffset: _ScreenUnits = ...,
+        disableddash: str | int | list[int] | tuple[int, ...] = ...,
+        disabledfill: str = ...,
+        disabledoutline: str = ...,
+        disabledoutlinestipple: str = ...,
+        disabledstipple: str = ...,
+        disabledwidth: _ScreenUnits = ...,
+        fill: str = ...,
+        offset: _ScreenUnits = ...,
+        outline: str = ...,
+        outlineoffset: _ScreenUnits = ...,
+        outlinestipple: str = ...,
+        state: Literal["normal", "hidden", "disabled"] = ...,
+        stipple: str = ...,
+        tags: str | list[str] | tuple[str, ...] = ...,
+        width: _ScreenUnits = ...,
+    ) -> int: ...
+    @overload
+    def create_text(
+        self,
+        x: float,
+        y: float,
+        /,
+        *,
+        activefill: str = ...,
+        activestipple: str = ...,
+        anchor: _Anchor = ...,
+        angle: float | str = ...,
+        disabledfill: str = ...,
+        disabledstipple: str = ...,
+        fill: str = ...,
+        font: _FontDescription = ...,
+        justify: Literal["left", "center", "right"] = ...,
+        offset: _ScreenUnits = ...,
+        state: Literal["normal", "hidden", "disabled"] = ...,
+        stipple: str = ...,
+        tags: str | list[str] | tuple[str, ...] = ...,
+        text: float | str = ...,
+        width: _ScreenUnits = ...,
+    ) -> int: ...
+    @overload
+    def create_text(
+        self,
+        coords: tuple[float, float] | list[int] | list[float],
+        /,
+        *,
+        activefill: str = ...,
+        activestipple: str = ...,
+        anchor: _Anchor = ...,
+        angle: float | str = ...,
+        disabledfill: str = ...,
+        disabledstipple: str = ...,
+        fill: str = ...,
+        font: _FontDescription = ...,
+        justify: Literal["left", "center", "right"] = ...,
+        offset: _ScreenUnits = ...,
+        state: Literal["normal", "hidden", "disabled"] = ...,
+        stipple: str = ...,
+        tags: str | list[str] | tuple[str, ...] = ...,
+        text: float | str = ...,
+        width: _ScreenUnits = ...,
+    ) -> int: ...
+    @overload
+    def create_window(
+        self,
+        x: float,
+        y: float,
+        /,
+        *,
+        anchor: _Anchor = ...,
+        height: _ScreenUnits = ...,
+        state: Literal["normal", "hidden", "disabled"] = ...,
+        tags: str | list[str] | tuple[str, ...] = ...,
+        width: _ScreenUnits = ...,
+        window: Widget = ...,
+    ) -> int: ...
+    @overload
+    def create_window(
+        self,
+        coords: tuple[float, float] | list[int] | list[float],
+        /,
+        *,
+        anchor: _Anchor = ...,
+        height: _ScreenUnits = ...,
+        state: Literal["normal", "hidden", "disabled"] = ...,
+        tags: str | list[str] | tuple[str, ...] = ...,
+        width: _ScreenUnits = ...,
+        window: Widget = ...,
+    ) -> int: ...
+    def dchars(self, *args) -> None: ...
+    def delete(self, *tagsOrCanvasIds: str | int) -> None: ...
+    @overload
+    def dtag(self, tag: str, tag_to_delete: str | None = ..., /) -> None: ...
+    @overload
+    def dtag(self, id: int, tag_to_delete: str, /) -> None: ...
+    def focus(self, *args): ...
+    def gettags(self, tagOrId: str | int, /) -> tuple[str, ...]: ...
+    def icursor(self, *args) -> None: ...
+    def index(self, *args): ...
+    def insert(self, *args) -> None: ...
+    def itemcget(self, tagOrId, option): ...
+    # itemconfigure kwargs depend on item type, which is not known when type checking
+    def itemconfigure(
+        self, tagOrId: str | int, cnf: dict[str, Any] | None = None, **kw: Any
+    ) -> dict[str, tuple[str, str, str, str, str]] | None: ...
+    itemconfig = itemconfigure
+    def move(self, *args) -> None: ...
+    def moveto(self, tagOrId: str | int, x: Literal[""] | float = "", y: Literal[""] | float = "") -> None: ...
+    def postscript(self, cnf={}, **kw): ...
+    # tkinter does:
+    #    lower = tag_lower
+    #    lift = tkraise = tag_raise
+    #
+    # But mypy doesn't like aliasing here (maybe because Misc defines the same names)
+    def tag_lower(self, first: str | int, second: str | int | None = ..., /) -> None: ...
+    def lower(self, first: str | int, second: str | int | None = ..., /) -> None: ...  # type: ignore[override]
+    def tag_raise(self, first: str | int, second: str | int | None = ..., /) -> None: ...
+    def tkraise(self, first: str | int, second: str | int | None = ..., /) -> None: ...  # type: ignore[override]
+    def lift(self, first: str | int, second: str | int | None = ..., /) -> None: ...  # type: ignore[override]
+    def scale(
+        self, tagOrId: str | int, xOrigin: _ScreenUnits, yOrigin: _ScreenUnits, xScale: float, yScale: float, /
+    ) -> None: ...
+    def scan_mark(self, x, y) -> None: ...
+    def scan_dragto(self, x, y, gain: int = 10) -> None: ...
+    def select_adjust(self, tagOrId, index) -> None: ...
+    def select_clear(self) -> None: ...
+    def select_from(self, tagOrId, index) -> None: ...
+    def select_item(self): ...
+    def select_to(self, tagOrId, index) -> None: ...
+    def type(self, tagOrId: str | int) -> int | None: ...
+
+class Checkbutton(Widget):
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        anchor: _Anchor = "center",
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        bitmap: str = "",
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        command: _ButtonCommand = "",
+        compound: _Compound = "none",
+        cursor: _Cursor = "",
+        disabledforeground: str = ...,
+        fg: str = ...,
+        font: _FontDescription = "TkDefaultFont",
+        foreground: str = ...,
+        height: _ScreenUnits = 0,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = 1,
+        image: _ImageSpec = "",
+        indicatoron: bool = True,
+        justify: Literal["left", "center", "right"] = "center",
+        name: str = ...,
+        offrelief: _Relief = ...,
+        # The checkbutton puts a value to its variable when it's checked or
+        # unchecked. We don't restrict the type of that value here, so
+        # Any-typing is fine.
+        #
+        # I think Checkbutton shouldn't be generic, because then specifying
+        # "any checkbutton regardless of what variable it uses" would be
+        # difficult, and we might run into issues just like how list[float]
+        # and list[int] are incompatible. Also, we would need a way to
+        # specify "Checkbutton not associated with any variable", which is
+        # done by setting variable to empty string (the default).
+        offvalue: Any = 0,
+        onvalue: Any = 1,
+        overrelief: _Relief | Literal[""] = "",
+        padx: _ScreenUnits = 1,
+        pady: _ScreenUnits = 1,
+        relief: _Relief = "flat",
+        selectcolor: str = ...,
+        selectimage: _ImageSpec = "",
+        state: Literal["normal", "active", "disabled"] = "normal",
+        takefocus: _TakeFocusValue = "",
+        text: float | str = "",
+        textvariable: Variable = ...,
+        tristateimage: _ImageSpec = "",
+        tristatevalue: Any = "",
+        underline: int = -1,
+        variable: Variable | Literal[""] = ...,
+        width: _ScreenUnits = 0,
+        wraplength: _ScreenUnits = 0,
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        anchor: _Anchor = ...,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        bitmap: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        command: _ButtonCommand = ...,
+        compound: _Compound = ...,
+        cursor: _Cursor = ...,
+        disabledforeground: str = ...,
+        fg: str = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        height: _ScreenUnits = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        image: _ImageSpec = ...,
+        indicatoron: bool = ...,
+        justify: Literal["left", "center", "right"] = ...,
+        offrelief: _Relief = ...,
+        offvalue: Any = ...,
+        onvalue: Any = ...,
+        overrelief: _Relief | Literal[""] = ...,
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+        relief: _Relief = ...,
+        selectcolor: str = ...,
+        selectimage: _ImageSpec = ...,
+        state: Literal["normal", "active", "disabled"] = ...,
+        takefocus: _TakeFocusValue = ...,
+        text: float | str = ...,
+        textvariable: Variable = ...,
+        tristateimage: _ImageSpec = ...,
+        tristatevalue: Any = ...,
+        underline: int = ...,
+        variable: Variable | Literal[""] = ...,
+        width: _ScreenUnits = ...,
+        wraplength: _ScreenUnits = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+    def deselect(self) -> None: ...
+    def flash(self) -> None: ...
+    def invoke(self) -> Any: ...
+    def select(self) -> None: ...
+    def toggle(self) -> None: ...
+
+class Entry(Widget, XView):
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        cursor: _Cursor = "xterm",
+        disabledbackground: str = ...,
+        disabledforeground: str = ...,
+        exportselection: bool = True,
+        fg: str = ...,
+        font: _FontDescription = "TkTextFont",
+        foreground: str = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        insertbackground: str = ...,
+        insertborderwidth: _ScreenUnits = 0,
+        insertofftime: int = 300,
+        insertontime: int = 600,
+        insertwidth: _ScreenUnits = ...,
+        invalidcommand: _EntryValidateCommand = "",
+        invcmd: _EntryValidateCommand = "",  # same as invalidcommand
+        justify: Literal["left", "center", "right"] = "left",
+        name: str = ...,
+        readonlybackground: str = ...,
+        relief: _Relief = "sunken",
+        selectbackground: str = ...,
+        selectborderwidth: _ScreenUnits = ...,
+        selectforeground: str = ...,
+        show: str = "",
+        state: Literal["normal", "disabled", "readonly"] = "normal",
+        takefocus: _TakeFocusValue = "",
+        textvariable: Variable = ...,
+        validate: Literal["none", "focus", "focusin", "focusout", "key", "all"] = "none",
+        validatecommand: _EntryValidateCommand = "",
+        vcmd: _EntryValidateCommand = "",  # same as validatecommand
+        width: int = 20,
+        xscrollcommand: _XYScrollCommand = "",
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        cursor: _Cursor = ...,
+        disabledbackground: str = ...,
+        disabledforeground: str = ...,
+        exportselection: bool = ...,
+        fg: str = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        insertbackground: str = ...,
+        insertborderwidth: _ScreenUnits = ...,
+        insertofftime: int = ...,
+        insertontime: int = ...,
+        insertwidth: _ScreenUnits = ...,
+        invalidcommand: _EntryValidateCommand = ...,
+        invcmd: _EntryValidateCommand = ...,
+        justify: Literal["left", "center", "right"] = ...,
+        readonlybackground: str = ...,
+        relief: _Relief = ...,
+        selectbackground: str = ...,
+        selectborderwidth: _ScreenUnits = ...,
+        selectforeground: str = ...,
+        show: str = ...,
+        state: Literal["normal", "disabled", "readonly"] = ...,
+        takefocus: _TakeFocusValue = ...,
+        textvariable: Variable = ...,
+        validate: Literal["none", "focus", "focusin", "focusout", "key", "all"] = ...,
+        validatecommand: _EntryValidateCommand = ...,
+        vcmd: _EntryValidateCommand = ...,
+        width: int = ...,
+        xscrollcommand: _XYScrollCommand = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+    def delete(self, first: str | int, last: str | int | None = None) -> None: ...
+    def get(self) -> str: ...
+    def icursor(self, index: str | int) -> None: ...
+    def index(self, index: str | int) -> int: ...
+    def insert(self, index: str | int, string: str) -> None: ...
+    def scan_mark(self, x) -> None: ...
+    def scan_dragto(self, x) -> None: ...
+    def selection_adjust(self, index: str | int) -> None: ...
+    def selection_clear(self) -> None: ...  # type: ignore[override]
+    def selection_from(self, index: str | int) -> None: ...
+    def selection_present(self) -> bool: ...
+    def selection_range(self, start: str | int, end: str | int) -> None: ...
+    def selection_to(self, index: str | int) -> None: ...
+    select_adjust = selection_adjust
+    select_clear = selection_clear
+    select_from = selection_from
+    select_present = selection_present
+    select_range = selection_range
+    select_to = selection_to
+
+class Frame(Widget):
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        background: str = ...,
+        bd: _ScreenUnits = 0,
+        bg: str = ...,
+        border: _ScreenUnits = 0,
+        borderwidth: _ScreenUnits = 0,
+        class_: str = "Frame",  # can't be changed with configure()
+        colormap: Literal["new", ""] | Misc = "",  # can't be changed with configure()
+        container: bool = False,  # can't be changed with configure()
+        cursor: _Cursor = "",
+        height: _ScreenUnits = 0,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = 0,
+        name: str = ...,
+        padx: _ScreenUnits = 0,
+        pady: _ScreenUnits = 0,
+        relief: _Relief = "flat",
+        takefocus: _TakeFocusValue = 0,
+        visual: str | tuple[str, int] = "",  # can't be changed with configure()
+        width: _ScreenUnits = 0,
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        cursor: _Cursor = ...,
+        height: _ScreenUnits = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+        relief: _Relief = ...,
+        takefocus: _TakeFocusValue = ...,
+        width: _ScreenUnits = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+
+class Label(Widget):
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        anchor: _Anchor = "center",
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        bitmap: str = "",
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        compound: _Compound = "none",
+        cursor: _Cursor = "",
+        disabledforeground: str = ...,
+        fg: str = ...,
+        font: _FontDescription = "TkDefaultFont",
+        foreground: str = ...,
+        height: _ScreenUnits = 0,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = 0,
+        image: _ImageSpec = "",
+        justify: Literal["left", "center", "right"] = "center",
+        name: str = ...,
+        padx: _ScreenUnits = 1,
+        pady: _ScreenUnits = 1,
+        relief: _Relief = "flat",
+        state: Literal["normal", "active", "disabled"] = "normal",
+        takefocus: _TakeFocusValue = 0,
+        text: float | str = "",
+        textvariable: Variable = ...,
+        underline: int = -1,
+        width: _ScreenUnits = 0,
+        wraplength: _ScreenUnits = 0,
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        anchor: _Anchor = ...,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        bitmap: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        compound: _Compound = ...,
+        cursor: _Cursor = ...,
+        disabledforeground: str = ...,
+        fg: str = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        height: _ScreenUnits = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        image: _ImageSpec = ...,
+        justify: Literal["left", "center", "right"] = ...,
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+        relief: _Relief = ...,
+        state: Literal["normal", "active", "disabled"] = ...,
+        takefocus: _TakeFocusValue = ...,
+        text: float | str = ...,
+        textvariable: Variable = ...,
+        underline: int = ...,
+        width: _ScreenUnits = ...,
+        wraplength: _ScreenUnits = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+
+class Listbox(Widget, XView, YView):
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        activestyle: Literal["dotbox", "none", "underline"] = ...,
+        background: str = ...,
+        bd: _ScreenUnits = 1,
+        bg: str = ...,
+        border: _ScreenUnits = 1,
+        borderwidth: _ScreenUnits = 1,
+        cursor: _Cursor = "",
+        disabledforeground: str = ...,
+        exportselection: bool | Literal[0, 1] = 1,
+        fg: str = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        height: int = 10,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        justify: Literal["left", "center", "right"] = "left",
+        # There's no tkinter.ListVar, but seems like bare tkinter.Variable
+        # actually works for this:
+        #
+        #    >>> import tkinter
+        #    >>> lb = tkinter.Listbox()
+        #    >>> var = lb['listvariable'] = tkinter.Variable()
+        #    >>> var.set(['foo', 'bar', 'baz'])
+        #    >>> lb.get(0, 'end')
+        #    ('foo', 'bar', 'baz')
+        listvariable: Variable = ...,
+        name: str = ...,
+        relief: _Relief = ...,
+        selectbackground: str = ...,
+        selectborderwidth: _ScreenUnits = 0,
+        selectforeground: str = ...,
+        # from listbox man page: "The value of the [selectmode] option may be
+        # arbitrary, but the default bindings expect it to be ..."
+        #
+        # I have never seen anyone setting this to something else than what
+        # "the default bindings expect", but let's support it anyway.
+        selectmode: str = "browse",
+        setgrid: bool = False,
+        state: Literal["normal", "disabled"] = "normal",
+        takefocus: _TakeFocusValue = "",
+        width: int = 20,
+        xscrollcommand: _XYScrollCommand = "",
+        yscrollcommand: _XYScrollCommand = "",
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        activestyle: Literal["dotbox", "none", "underline"] = ...,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        cursor: _Cursor = ...,
+        disabledforeground: str = ...,
+        exportselection: bool = ...,
+        fg: str = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        height: int = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        justify: Literal["left", "center", "right"] = ...,
+        listvariable: Variable = ...,
+        relief: _Relief = ...,
+        selectbackground: str = ...,
+        selectborderwidth: _ScreenUnits = ...,
+        selectforeground: str = ...,
+        selectmode: str = ...,
+        setgrid: bool = ...,
+        state: Literal["normal", "disabled"] = ...,
+        takefocus: _TakeFocusValue = ...,
+        width: int = ...,
+        xscrollcommand: _XYScrollCommand = ...,
+        yscrollcommand: _XYScrollCommand = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+    def activate(self, index: str | int) -> None: ...
+    def bbox(self, index: str | int) -> tuple[int, int, int, int] | None: ...  # type: ignore[override]
+    def curselection(self): ...
+    def delete(self, first: str | int, last: str | int | None = None) -> None: ...
+    def get(self, first: str | int, last: str | int | None = None): ...
+    def index(self, index: str | int) -> int: ...
+    def insert(self, index: str | int, *elements: str | float) -> None: ...
+    def nearest(self, y): ...
+    def scan_mark(self, x, y) -> None: ...
+    def scan_dragto(self, x, y) -> None: ...
+    def see(self, index: str | int) -> None: ...
+    def selection_anchor(self, index: str | int) -> None: ...
+    select_anchor = selection_anchor
+    def selection_clear(self, first: str | int, last: str | int | None = None) -> None: ...  # type: ignore[override]
+    select_clear = selection_clear
+    def selection_includes(self, index: str | int): ...
+    select_includes = selection_includes
+    def selection_set(self, first: str | int, last: str | int | None = None) -> None: ...
+    select_set = selection_set
+    def size(self) -> int: ...  # type: ignore[override]
+    def itemcget(self, index: str | int, option): ...
+    def itemconfigure(self, index: str | int, cnf: Incomplete | None = None, **kw): ...
+    itemconfig = itemconfigure
+
+class Menu(Widget):
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        activebackground: str = ...,
+        activeborderwidth: _ScreenUnits = ...,
+        activeforeground: str = ...,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        cursor: _Cursor = "arrow",
+        disabledforeground: str = ...,
+        fg: str = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        name: str = ...,
+        postcommand: Callable[[], object] | str = "",
+        relief: _Relief = ...,
+        selectcolor: str = ...,
+        takefocus: _TakeFocusValue = 0,
+        tearoff: bool | Literal[0, 1] = 1,
+        # I guess tearoffcommand arguments are supposed to be widget objects,
+        # but they are widget name strings. Use nametowidget() to handle the
+        # arguments of tearoffcommand.
+        tearoffcommand: Callable[[str, str], object] | str = "",
+        title: str = "",
+        type: Literal["menubar", "tearoff", "normal"] = "normal",
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        activebackground: str = ...,
+        activeborderwidth: _ScreenUnits = ...,
+        activeforeground: str = ...,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        cursor: _Cursor = ...,
+        disabledforeground: str = ...,
+        fg: str = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        postcommand: Callable[[], object] | str = ...,
+        relief: _Relief = ...,
+        selectcolor: str = ...,
+        takefocus: _TakeFocusValue = ...,
+        tearoff: bool = ...,
+        tearoffcommand: Callable[[str, str], object] | str = ...,
+        title: str = ...,
+        type: Literal["menubar", "tearoff", "normal"] = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+    def tk_popup(self, x: int, y: int, entry: str | int = "") -> None: ...
+    def activate(self, index: str | int) -> None: ...
+    def add(self, itemType, cnf={}, **kw): ...  # docstring says "Internal function."
+    def insert(self, index, itemType, cnf={}, **kw): ...  # docstring says "Internal function."
+    def add_cascade(
+        self,
+        cnf: dict[str, Any] | None = {},
+        *,
+        accelerator: str = ...,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        background: str = ...,
+        bitmap: str = ...,
+        columnbreak: int = ...,
+        command: Callable[[], object] | str = ...,
+        compound: _Compound = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        hidemargin: bool = ...,
+        image: _ImageSpec = ...,
+        label: str = ...,
+        menu: Menu = ...,
+        state: Literal["normal", "active", "disabled"] = ...,
+        underline: int = ...,
+    ) -> None: ...
+    def add_checkbutton(
+        self,
+        cnf: dict[str, Any] | None = {},
+        *,
+        accelerator: str = ...,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        background: str = ...,
+        bitmap: str = ...,
+        columnbreak: int = ...,
+        command: Callable[[], object] | str = ...,
+        compound: _Compound = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        hidemargin: bool = ...,
+        image: _ImageSpec = ...,
+        indicatoron: bool = ...,
+        label: str = ...,
+        offvalue: Any = ...,
+        onvalue: Any = ...,
+        selectcolor: str = ...,
+        selectimage: _ImageSpec = ...,
+        state: Literal["normal", "active", "disabled"] = ...,
+        underline: int = ...,
+        variable: Variable = ...,
+    ) -> None: ...
+    def add_command(
+        self,
+        cnf: dict[str, Any] | None = {},
+        *,
+        accelerator: str = ...,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        background: str = ...,
+        bitmap: str = ...,
+        columnbreak: int = ...,
+        command: Callable[[], object] | str = ...,
+        compound: _Compound = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        hidemargin: bool = ...,
+        image: _ImageSpec = ...,
+        label: str = ...,
+        state: Literal["normal", "active", "disabled"] = ...,
+        underline: int = ...,
+    ) -> None: ...
+    def add_radiobutton(
+        self,
+        cnf: dict[str, Any] | None = {},
+        *,
+        accelerator: str = ...,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        background: str = ...,
+        bitmap: str = ...,
+        columnbreak: int = ...,
+        command: Callable[[], object] | str = ...,
+        compound: _Compound = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        hidemargin: bool = ...,
+        image: _ImageSpec = ...,
+        indicatoron: bool = ...,
+        label: str = ...,
+        selectcolor: str = ...,
+        selectimage: _ImageSpec = ...,
+        state: Literal["normal", "active", "disabled"] = ...,
+        underline: int = ...,
+        value: Any = ...,
+        variable: Variable = ...,
+    ) -> None: ...
+    def add_separator(self, cnf: dict[str, Any] | None = {}, *, background: str = ...) -> None: ...
+    def insert_cascade(
+        self,
+        index: str | int,
+        cnf: dict[str, Any] | None = {},
+        *,
+        accelerator: str = ...,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        background: str = ...,
+        bitmap: str = ...,
+        columnbreak: int = ...,
+        command: Callable[[], object] | str = ...,
+        compound: _Compound = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        hidemargin: bool = ...,
+        image: _ImageSpec = ...,
+        label: str = ...,
+        menu: Menu = ...,
+        state: Literal["normal", "active", "disabled"] = ...,
+        underline: int = ...,
+    ) -> None: ...
+    def insert_checkbutton(
+        self,
+        index: str | int,
+        cnf: dict[str, Any] | None = {},
+        *,
+        accelerator: str = ...,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        background: str = ...,
+        bitmap: str = ...,
+        columnbreak: int = ...,
+        command: Callable[[], object] | str = ...,
+        compound: _Compound = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        hidemargin: bool = ...,
+        image: _ImageSpec = ...,
+        indicatoron: bool = ...,
+        label: str = ...,
+        offvalue: Any = ...,
+        onvalue: Any = ...,
+        selectcolor: str = ...,
+        selectimage: _ImageSpec = ...,
+        state: Literal["normal", "active", "disabled"] = ...,
+        underline: int = ...,
+        variable: Variable = ...,
+    ) -> None: ...
+    def insert_command(
+        self,
+        index: str | int,
+        cnf: dict[str, Any] | None = {},
+        *,
+        accelerator: str = ...,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        background: str = ...,
+        bitmap: str = ...,
+        columnbreak: int = ...,
+        command: Callable[[], object] | str = ...,
+        compound: _Compound = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        hidemargin: bool = ...,
+        image: _ImageSpec = ...,
+        label: str = ...,
+        state: Literal["normal", "active", "disabled"] = ...,
+        underline: int = ...,
+    ) -> None: ...
+    def insert_radiobutton(
+        self,
+        index: str | int,
+        cnf: dict[str, Any] | None = {},
+        *,
+        accelerator: str = ...,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        background: str = ...,
+        bitmap: str = ...,
+        columnbreak: int = ...,
+        command: Callable[[], object] | str = ...,
+        compound: _Compound = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        hidemargin: bool = ...,
+        image: _ImageSpec = ...,
+        indicatoron: bool = ...,
+        label: str = ...,
+        selectcolor: str = ...,
+        selectimage: _ImageSpec = ...,
+        state: Literal["normal", "active", "disabled"] = ...,
+        underline: int = ...,
+        value: Any = ...,
+        variable: Variable = ...,
+    ) -> None: ...
+    def insert_separator(self, index: str | int, cnf: dict[str, Any] | None = {}, *, background: str = ...) -> None: ...
+    def delete(self, index1: str | int, index2: str | int | None = None) -> None: ...
+    def entrycget(self, index: str | int, option: str) -> Any: ...
+    def entryconfigure(
+        self, index: str | int, cnf: dict[str, Any] | None = None, **kw: Any
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    entryconfig = entryconfigure
+    def index(self, index: str | int) -> int | None: ...
+    def invoke(self, index: str | int) -> Any: ...
+    def post(self, x: int, y: int) -> None: ...
+    def type(self, index: str | int) -> Literal["cascade", "checkbutton", "command", "radiobutton", "separator"]: ...
+    def unpost(self) -> None: ...
+    def xposition(self, index: str | int) -> int: ...
+    def yposition(self, index: str | int) -> int: ...
+
+class Menubutton(Widget):
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        anchor: _Anchor = ...,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        bitmap: str = "",
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        compound: _Compound = "none",
+        cursor: _Cursor = "",
+        direction: Literal["above", "below", "left", "right", "flush"] = "below",
+        disabledforeground: str = ...,
+        fg: str = ...,
+        font: _FontDescription = "TkDefaultFont",
+        foreground: str = ...,
+        height: _ScreenUnits = 0,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = 0,
+        image: _ImageSpec = "",
+        indicatoron: bool = ...,
+        justify: Literal["left", "center", "right"] = ...,
+        menu: Menu = ...,
+        name: str = ...,
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+        relief: _Relief = "flat",
+        state: Literal["normal", "active", "disabled"] = "normal",
+        takefocus: _TakeFocusValue = 0,
+        text: float | str = "",
+        textvariable: Variable = ...,
+        underline: int = -1,
+        width: _ScreenUnits = 0,
+        wraplength: _ScreenUnits = 0,
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        anchor: _Anchor = ...,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        bitmap: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        compound: _Compound = ...,
+        cursor: _Cursor = ...,
+        direction: Literal["above", "below", "left", "right", "flush"] = ...,
+        disabledforeground: str = ...,
+        fg: str = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        height: _ScreenUnits = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        image: _ImageSpec = ...,
+        indicatoron: bool = ...,
+        justify: Literal["left", "center", "right"] = ...,
+        menu: Menu = ...,
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+        relief: _Relief = ...,
+        state: Literal["normal", "active", "disabled"] = ...,
+        takefocus: _TakeFocusValue = ...,
+        text: float | str = ...,
+        textvariable: Variable = ...,
+        underline: int = ...,
+        width: _ScreenUnits = ...,
+        wraplength: _ScreenUnits = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+
+class Message(Widget):
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        anchor: _Anchor = "center",
+        aspect: int = 150,
+        background: str = ...,
+        bd: _ScreenUnits = 1,
+        bg: str = ...,
+        border: _ScreenUnits = 1,
+        borderwidth: _ScreenUnits = 1,
+        cursor: _Cursor = "",
+        fg: str = ...,
+        font: _FontDescription = "TkDefaultFont",
+        foreground: str = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = 0,
+        justify: Literal["left", "center", "right"] = "left",
+        name: str = ...,
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+        relief: _Relief = "flat",
+        takefocus: _TakeFocusValue = 0,
+        text: float | str = "",
+        textvariable: Variable = ...,
+        # there's width but no height
+        width: _ScreenUnits = 0,
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        anchor: _Anchor = ...,
+        aspect: int = ...,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        cursor: _Cursor = ...,
+        fg: str = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        justify: Literal["left", "center", "right"] = ...,
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+        relief: _Relief = ...,
+        takefocus: _TakeFocusValue = ...,
+        text: float | str = ...,
+        textvariable: Variable = ...,
+        width: _ScreenUnits = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+
+class Radiobutton(Widget):
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        anchor: _Anchor = "center",
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        bitmap: str = "",
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        command: _ButtonCommand = "",
+        compound: _Compound = "none",
+        cursor: _Cursor = "",
+        disabledforeground: str = ...,
+        fg: str = ...,
+        font: _FontDescription = "TkDefaultFont",
+        foreground: str = ...,
+        height: _ScreenUnits = 0,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = 1,
+        image: _ImageSpec = "",
+        indicatoron: bool = True,
+        justify: Literal["left", "center", "right"] = "center",
+        name: str = ...,
+        offrelief: _Relief = ...,
+        overrelief: _Relief | Literal[""] = "",
+        padx: _ScreenUnits = 1,
+        pady: _ScreenUnits = 1,
+        relief: _Relief = "flat",
+        selectcolor: str = ...,
+        selectimage: _ImageSpec = "",
+        state: Literal["normal", "active", "disabled"] = "normal",
+        takefocus: _TakeFocusValue = "",
+        text: float | str = "",
+        textvariable: Variable = ...,
+        tristateimage: _ImageSpec = "",
+        tristatevalue: Any = "",
+        underline: int = -1,
+        value: Any = "",
+        variable: Variable | Literal[""] = ...,
+        width: _ScreenUnits = 0,
+        wraplength: _ScreenUnits = 0,
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        activebackground: str = ...,
+        activeforeground: str = ...,
+        anchor: _Anchor = ...,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        bitmap: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        command: _ButtonCommand = ...,
+        compound: _Compound = ...,
+        cursor: _Cursor = ...,
+        disabledforeground: str = ...,
+        fg: str = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        height: _ScreenUnits = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        image: _ImageSpec = ...,
+        indicatoron: bool = ...,
+        justify: Literal["left", "center", "right"] = ...,
+        offrelief: _Relief = ...,
+        overrelief: _Relief | Literal[""] = ...,
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+        relief: _Relief = ...,
+        selectcolor: str = ...,
+        selectimage: _ImageSpec = ...,
+        state: Literal["normal", "active", "disabled"] = ...,
+        takefocus: _TakeFocusValue = ...,
+        text: float | str = ...,
+        textvariable: Variable = ...,
+        tristateimage: _ImageSpec = ...,
+        tristatevalue: Any = ...,
+        underline: int = ...,
+        value: Any = ...,
+        variable: Variable | Literal[""] = ...,
+        width: _ScreenUnits = ...,
+        wraplength: _ScreenUnits = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+    def deselect(self) -> None: ...
+    def flash(self) -> None: ...
+    def invoke(self) -> Any: ...
+    def select(self) -> None: ...
+
+class Scale(Widget):
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        activebackground: str = ...,
+        background: str = ...,
+        bd: _ScreenUnits = 1,
+        bg: str = ...,
+        bigincrement: float = 0.0,
+        border: _ScreenUnits = 1,
+        borderwidth: _ScreenUnits = 1,
+        # don't know why the callback gets string instead of float
+        command: str | Callable[[str], object] = "",
+        cursor: _Cursor = "",
+        digits: int = 0,
+        fg: str = ...,
+        font: _FontDescription = "TkDefaultFont",
+        foreground: str = ...,
+        from_: float = 0.0,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        label: str = "",
+        length: _ScreenUnits = 100,
+        name: str = ...,
+        orient: Literal["horizontal", "vertical"] = "vertical",
+        relief: _Relief = "flat",
+        repeatdelay: int = 300,
+        repeatinterval: int = 100,
+        resolution: float = 1.0,
+        showvalue: bool = True,
+        sliderlength: _ScreenUnits = 30,
+        sliderrelief: _Relief = "raised",
+        state: Literal["normal", "active", "disabled"] = "normal",
+        takefocus: _TakeFocusValue = "",
+        tickinterval: float = 0.0,
+        to: float = 100.0,
+        troughcolor: str = ...,
+        variable: IntVar | DoubleVar = ...,
+        width: _ScreenUnits = 15,
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        activebackground: str = ...,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        bigincrement: float = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        command: str | Callable[[str], object] = ...,
+        cursor: _Cursor = ...,
+        digits: int = ...,
+        fg: str = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        from_: float = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        label: str = ...,
+        length: _ScreenUnits = ...,
+        orient: Literal["horizontal", "vertical"] = ...,
+        relief: _Relief = ...,
+        repeatdelay: int = ...,
+        repeatinterval: int = ...,
+        resolution: float = ...,
+        showvalue: bool = ...,
+        sliderlength: _ScreenUnits = ...,
+        sliderrelief: _Relief = ...,
+        state: Literal["normal", "active", "disabled"] = ...,
+        takefocus: _TakeFocusValue = ...,
+        tickinterval: float = ...,
+        to: float = ...,
+        troughcolor: str = ...,
+        variable: IntVar | DoubleVar = ...,
+        width: _ScreenUnits = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+    def get(self) -> float: ...
+    def set(self, value) -> None: ...
+    def coords(self, value: float | None = None) -> tuple[int, int]: ...
+    def identify(self, x, y) -> Literal["", "slider", "trough1", "trough2"]: ...
+
+class Scrollbar(Widget):
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        activebackground: str = ...,
+        activerelief: _Relief = "raised",
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        # There are many ways how the command may get called. Search for
+        # 'SCROLLING COMMANDS' in scrollbar man page. There doesn't seem to
+        # be any way to specify an overloaded callback function, so we say
+        # that it can take any args while it can't in reality.
+        command: Callable[..., tuple[float, float] | None] | str = "",
+        cursor: _Cursor = "",
+        elementborderwidth: _ScreenUnits = -1,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = 0,
+        jump: bool = False,
+        name: str = ...,
+        orient: Literal["horizontal", "vertical"] = "vertical",
+        relief: _Relief = ...,
+        repeatdelay: int = 300,
+        repeatinterval: int = 100,
+        takefocus: _TakeFocusValue = "",
+        troughcolor: str = ...,
+        width: _ScreenUnits = ...,
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        activebackground: str = ...,
+        activerelief: _Relief = ...,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        command: Callable[..., tuple[float, float] | None] | str = ...,
+        cursor: _Cursor = ...,
+        elementborderwidth: _ScreenUnits = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        jump: bool = ...,
+        orient: Literal["horizontal", "vertical"] = ...,
+        relief: _Relief = ...,
+        repeatdelay: int = ...,
+        repeatinterval: int = ...,
+        takefocus: _TakeFocusValue = ...,
+        troughcolor: str = ...,
+        width: _ScreenUnits = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+    def activate(self, index: Incomplete | None = None): ...
+    def delta(self, deltax: int, deltay: int) -> float: ...
+    def fraction(self, x: int, y: int) -> float: ...
+    def identify(self, x: int, y: int) -> Literal["arrow1", "arrow2", "slider", "trough1", "trough2", ""]: ...
+    def get(self) -> tuple[float, float, float, float] | tuple[float, float]: ...
+    def set(self, first: float | str, last: float | str) -> None: ...
+
+_TextIndex: TypeAlias = _tkinter.Tcl_Obj | str | float | Misc
+
+class Text(Widget, XView, YView):
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        autoseparators: bool = True,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        blockcursor: bool = False,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        cursor: _Cursor = "xterm",
+        endline: int | Literal[""] = "",
+        exportselection: bool = True,
+        fg: str = ...,
+        font: _FontDescription = "TkFixedFont",
+        foreground: str = ...,
+        # width is always int, but height is allowed to be ScreenUnits.
+        # This doesn't make any sense to me, and this isn't documented.
+        # The docs seem to say that both should be integers.
+        height: _ScreenUnits = 24,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        inactiveselectbackground: str = ...,
+        insertbackground: str = ...,
+        insertborderwidth: _ScreenUnits = 0,
+        insertofftime: int = 300,
+        insertontime: int = 600,
+        insertunfocussed: Literal["none", "hollow", "solid"] = "none",
+        insertwidth: _ScreenUnits = ...,
+        maxundo: int = 0,
+        name: str = ...,
+        padx: _ScreenUnits = 1,
+        pady: _ScreenUnits = 1,
+        relief: _Relief = ...,
+        selectbackground: str = ...,
+        selectborderwidth: _ScreenUnits = ...,
+        selectforeground: str = ...,
+        setgrid: bool = False,
+        spacing1: _ScreenUnits = 0,
+        spacing2: _ScreenUnits = 0,
+        spacing3: _ScreenUnits = 0,
+        startline: int | Literal[""] = "",
+        state: Literal["normal", "disabled"] = "normal",
+        # Literal inside Tuple doesn't actually work
+        tabs: _ScreenUnits | str | tuple[_ScreenUnits | str, ...] = "",
+        tabstyle: Literal["tabular", "wordprocessor"] = "tabular",
+        takefocus: _TakeFocusValue = "",
+        undo: bool = False,
+        width: int = 80,
+        wrap: Literal["none", "char", "word"] = "char",
+        xscrollcommand: _XYScrollCommand = "",
+        yscrollcommand: _XYScrollCommand = "",
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        autoseparators: bool = ...,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        blockcursor: bool = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        cursor: _Cursor = ...,
+        endline: int | Literal[""] = ...,
+        exportselection: bool = ...,
+        fg: str = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        height: _ScreenUnits = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        inactiveselectbackground: str = ...,
+        insertbackground: str = ...,
+        insertborderwidth: _ScreenUnits = ...,
+        insertofftime: int = ...,
+        insertontime: int = ...,
+        insertunfocussed: Literal["none", "hollow", "solid"] = ...,
+        insertwidth: _ScreenUnits = ...,
+        maxundo: int = ...,
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+        relief: _Relief = ...,
+        selectbackground: str = ...,
+        selectborderwidth: _ScreenUnits = ...,
+        selectforeground: str = ...,
+        setgrid: bool = ...,
+        spacing1: _ScreenUnits = ...,
+        spacing2: _ScreenUnits = ...,
+        spacing3: _ScreenUnits = ...,
+        startline: int | Literal[""] = ...,
+        state: Literal["normal", "disabled"] = ...,
+        tabs: _ScreenUnits | str | tuple[_ScreenUnits | str, ...] = ...,
+        tabstyle: Literal["tabular", "wordprocessor"] = ...,
+        takefocus: _TakeFocusValue = ...,
+        undo: bool = ...,
+        width: int = ...,
+        wrap: Literal["none", "char", "word"] = ...,
+        xscrollcommand: _XYScrollCommand = ...,
+        yscrollcommand: _XYScrollCommand = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+    def bbox(self, index: _TextIndex) -> tuple[int, int, int, int] | None: ...  # type: ignore[override]
+    def compare(self, index1: _TextIndex, op: Literal["<", "<=", "==", ">=", ">", "!="], index2: _TextIndex) -> bool: ...
+    def count(self, index1, index2, *args): ...  # TODO
+    @overload
+    def debug(self, boolean: None = None) -> bool: ...
+    @overload
+    def debug(self, boolean: bool) -> None: ...
+    def delete(self, index1: _TextIndex, index2: _TextIndex | None = None) -> None: ...
+    def dlineinfo(self, index: _TextIndex) -> tuple[int, int, int, int, int] | None: ...
+    @overload
+    def dump(
+        self,
+        index1: _TextIndex,
+        index2: _TextIndex | None = None,
+        command: None = None,
+        *,
+        all: bool = ...,
+        image: bool = ...,
+        mark: bool = ...,
+        tag: bool = ...,
+        text: bool = ...,
+        window: bool = ...,
+    ) -> list[tuple[str, str, str]]: ...
+    @overload
+    def dump(
+        self,
+        index1: _TextIndex,
+        index2: _TextIndex | None,
+        command: Callable[[str, str, str], object] | str,
+        *,
+        all: bool = ...,
+        image: bool = ...,
+        mark: bool = ...,
+        tag: bool = ...,
+        text: bool = ...,
+        window: bool = ...,
+    ) -> None: ...
+    @overload
+    def dump(
+        self,
+        index1: _TextIndex,
+        index2: _TextIndex | None = None,
+        *,
+        command: Callable[[str, str, str], object] | str,
+        all: bool = ...,
+        image: bool = ...,
+        mark: bool = ...,
+        tag: bool = ...,
+        text: bool = ...,
+        window: bool = ...,
+    ) -> None: ...
+    def edit(self, *args): ...  # docstring says "Internal method"
+    @overload
+    def edit_modified(self, arg: None = None) -> bool: ...  # actually returns Literal[0, 1]
+    @overload
+    def edit_modified(self, arg: bool) -> None: ...  # actually returns empty string
+    def edit_redo(self) -> None: ...  # actually returns empty string
+    def edit_reset(self) -> None: ...  # actually returns empty string
+    def edit_separator(self) -> None: ...  # actually returns empty string
+    def edit_undo(self) -> None: ...  # actually returns empty string
+    def get(self, index1: _TextIndex, index2: _TextIndex | None = None) -> str: ...
+    @overload
+    def image_cget(self, index: _TextIndex, option: Literal["image", "name"]) -> str: ...
+    @overload
+    def image_cget(self, index: _TextIndex, option: Literal["padx", "pady"]) -> int: ...
+    @overload
+    def image_cget(self, index: _TextIndex, option: Literal["align"]) -> Literal["baseline", "bottom", "center", "top"]: ...
+    @overload
+    def image_cget(self, index: _TextIndex, option: str) -> Any: ...
+    @overload
+    def image_configure(self, index: _TextIndex, cnf: str) -> tuple[str, str, str, str, str | int]: ...
+    @overload
+    def image_configure(
+        self,
+        index: _TextIndex,
+        cnf: dict[str, Any] | None = {},
+        *,
+        align: Literal["baseline", "bottom", "center", "top"] = ...,
+        image: _ImageSpec = ...,
+        name: str = ...,
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+    ) -> dict[str, tuple[str, str, str, str, str | int]] | None: ...
+    def image_create(
+        self,
+        index: _TextIndex,
+        cnf: dict[str, Any] | None = {},
+        *,
+        align: Literal["baseline", "bottom", "center", "top"] = ...,
+        image: _ImageSpec = ...,
+        name: str = ...,
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+    ) -> str: ...
+    def image_names(self) -> tuple[str, ...]: ...
+    def index(self, index: _TextIndex) -> str: ...
+    def insert(self, index: _TextIndex, chars: str, *args: str | list[str] | tuple[str, ...]) -> None: ...
+    @overload
+    def mark_gravity(self, markName: str, direction: None = None) -> Literal["left", "right"]: ...
+    @overload
+    def mark_gravity(self, markName: str, direction: Literal["left", "right"]) -> None: ...  # actually returns empty string
+    def mark_names(self) -> tuple[str, ...]: ...
+    def mark_set(self, markName: str, index: _TextIndex) -> None: ...
+    def mark_unset(self, *markNames: str) -> None: ...
+    def mark_next(self, index: _TextIndex) -> str | None: ...
+    def mark_previous(self, index: _TextIndex) -> str | None: ...
+    # **kw of peer_create is same as the kwargs of Text.__init__
+    def peer_create(self, newPathName: str | Text, cnf: dict[str, Any] = {}, **kw) -> None: ...
+    def peer_names(self) -> tuple[_tkinter.Tcl_Obj, ...]: ...
+    def replace(self, index1: _TextIndex, index2: _TextIndex, chars: str, *args: str | list[str] | tuple[str, ...]) -> None: ...
+    def scan_mark(self, x: int, y: int) -> None: ...
+    def scan_dragto(self, x: int, y: int) -> None: ...
+    def search(
+        self,
+        pattern: str,
+        index: _TextIndex,
+        stopindex: _TextIndex | None = None,
+        forwards: bool | None = None,
+        backwards: bool | None = None,
+        exact: bool | None = None,
+        regexp: bool | None = None,
+        nocase: bool | None = None,
+        count: Variable | None = None,
+        elide: bool | None = None,
+    ) -> str: ...  # returns empty string for not found
+    def see(self, index: _TextIndex) -> None: ...
+    def tag_add(self, tagName: str, index1: _TextIndex, *args: _TextIndex) -> None: ...
+    # tag_bind stuff is very similar to Canvas
+    @overload
+    def tag_bind(
+        self,
+        tagName: str,
+        sequence: str | None,
+        func: Callable[[Event[Text]], object] | None,
+        add: Literal["", "+"] | bool | None = None,
+    ) -> str: ...
+    @overload
+    def tag_bind(self, tagName: str, sequence: str | None, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
+    def tag_unbind(self, tagName: str, sequence: str, funcid: str | None = None) -> None: ...
+    # allowing any string for cget instead of just Literals because there's no other way to look up tag options
+    def tag_cget(self, tagName: str, option: str): ...
+    @overload
+    def tag_configure(
+        self,
+        tagName: str,
+        cnf: dict[str, Any] | None = None,
+        *,
+        background: str = ...,
+        bgstipple: str = ...,
+        borderwidth: _ScreenUnits = ...,
+        border: _ScreenUnits = ...,  # alias for borderwidth
+        elide: bool = ...,
+        fgstipple: str = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        justify: Literal["left", "right", "center"] = ...,
+        lmargin1: _ScreenUnits = ...,
+        lmargin2: _ScreenUnits = ...,
+        lmargincolor: str = ...,
+        offset: _ScreenUnits = ...,
+        overstrike: bool = ...,
+        overstrikefg: str = ...,
+        relief: _Relief = ...,
+        rmargin: _ScreenUnits = ...,
+        rmargincolor: str = ...,
+        selectbackground: str = ...,
+        selectforeground: str = ...,
+        spacing1: _ScreenUnits = ...,
+        spacing2: _ScreenUnits = ...,
+        spacing3: _ScreenUnits = ...,
+        tabs: Any = ...,  # the exact type is kind of complicated, see manual page
+        tabstyle: Literal["tabular", "wordprocessor"] = ...,
+        underline: bool = ...,
+        underlinefg: str = ...,
+        wrap: Literal["none", "char", "word"] = ...,  # be careful with "none" vs None
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def tag_configure(self, tagName: str, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    tag_config = tag_configure
+    def tag_delete(self, first_tag_name: str, /, *tagNames: str) -> None: ...  # error if no tag names given
+    def tag_lower(self, tagName: str, belowThis: str | None = None) -> None: ...
+    def tag_names(self, index: _TextIndex | None = None) -> tuple[str, ...]: ...
+    def tag_nextrange(
+        self, tagName: str, index1: _TextIndex, index2: _TextIndex | None = None
+    ) -> tuple[str, str] | tuple[()]: ...
+    def tag_prevrange(
+        self, tagName: str, index1: _TextIndex, index2: _TextIndex | None = None
+    ) -> tuple[str, str] | tuple[()]: ...
+    def tag_raise(self, tagName: str, aboveThis: str | None = None) -> None: ...
+    def tag_ranges(self, tagName: str) -> tuple[_tkinter.Tcl_Obj, ...]: ...
+    # tag_remove and tag_delete are different
+    def tag_remove(self, tagName: str, index1: _TextIndex, index2: _TextIndex | None = None) -> None: ...
+    @overload
+    def window_cget(self, index: _TextIndex, option: Literal["padx", "pady"]) -> int: ...
+    @overload
+    def window_cget(self, index: _TextIndex, option: Literal["stretch"]) -> bool: ...  # actually returns Literal[0, 1]
+    @overload
+    def window_cget(self, index: _TextIndex, option: Literal["align"]) -> Literal["baseline", "bottom", "center", "top"]: ...
+    @overload  # window is set to a widget, but read as the string name.
+    def window_cget(self, index: _TextIndex, option: Literal["create", "window"]) -> str: ...
+    @overload
+    def window_cget(self, index: _TextIndex, option: str) -> Any: ...
+    @overload
+    def window_configure(self, index: _TextIndex, cnf: str) -> tuple[str, str, str, str, str | int]: ...
+    @overload
+    def window_configure(
+        self,
+        index: _TextIndex,
+        cnf: dict[str, Any] | None = None,
+        *,
+        align: Literal["baseline", "bottom", "center", "top"] = ...,
+        create: str = ...,
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+        stretch: bool | Literal[0, 1] = ...,
+        window: Misc | str = ...,
+    ) -> dict[str, tuple[str, str, str, str, str | int]] | None: ...
+    window_config = window_configure
+    def window_create(
+        self,
+        index: _TextIndex,
+        cnf: dict[str, Any] | None = {},
+        *,
+        align: Literal["baseline", "bottom", "center", "top"] = ...,
+        create: str = ...,
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+        stretch: bool | Literal[0, 1] = ...,
+        window: Misc | str = ...,
+    ) -> None: ...
+    def window_names(self) -> tuple[str, ...]: ...
+    def yview_pickplace(self, *what): ...  # deprecated
+
+class _setit:
+    def __init__(self, var, value, callback: Incomplete | None = None) -> None: ...
+    def __call__(self, *args) -> None: ...
+
+# manual page: tk_optionMenu
+class OptionMenu(Menubutton):
+    widgetName: Incomplete
+    menuname: Incomplete
+    def __init__(
+        # differs from other widgets
+        self,
+        master: Misc | None,
+        variable: StringVar,
+        value: str,
+        *values: str,
+        # kwarg only from now on
+        command: Callable[[StringVar], object] | None = ...,
+    ) -> None: ...
+    # configure, config, cget are inherited from Menubutton
+    # destroy and __getitem__ are overridden, signature does not change
+
+# Marker to indicate that it is a valid bitmap/photo image. PIL implements compatible versions
+# which don't share a class hierarchy. The actual API is a __str__() which returns a valid name,
+# not something that type checkers can detect.
+@type_check_only
+class _Image: ...
+
+@type_check_only
+class _BitmapImageLike(_Image): ...
+
+@type_check_only
+class _PhotoImageLike(_Image): ...
+
+class Image(_Image):
+    name: Incomplete
+    tk: _tkinter.TkappType
+    def __init__(
+        self, imgtype, name: Incomplete | None = None, cnf={}, master: Misc | _tkinter.TkappType | None = None, **kw
+    ) -> None: ...
+    def __del__(self) -> None: ...
+    def __setitem__(self, key, value) -> None: ...
+    def __getitem__(self, key): ...
+    configure: Incomplete
+    config: Incomplete
+    def height(self) -> int: ...
+    def type(self): ...
+    def width(self) -> int: ...
+
+class PhotoImage(Image, _PhotoImageLike):
+    # This should be kept in sync with PIL.ImageTK.PhotoImage.__init__()
+    def __init__(
+        self,
+        name: str | None = None,
+        cnf: dict[str, Any] = {},
+        master: Misc | _tkinter.TkappType | None = None,
+        *,
+        data: str | bytes = ...,  # not same as data argument of put()
+        format: str = ...,
+        file: StrOrBytesPath = ...,
+        gamma: float = ...,
+        height: int = ...,
+        palette: int | str = ...,
+        width: int = ...,
+    ) -> None: ...
+    def configure(
+        self,
+        *,
+        data: str | bytes = ...,
+        format: str = ...,
+        file: StrOrBytesPath = ...,
+        gamma: float = ...,
+        height: int = ...,
+        palette: int | str = ...,
+        width: int = ...,
+    ) -> None: ...
+    config = configure
+    def blank(self) -> None: ...
+    def cget(self, option: str) -> str: ...
+    def __getitem__(self, key: str) -> str: ...  # always string: image['height'] can be '0'
+    def copy(self) -> PhotoImage: ...
+    def zoom(self, x: int, y: int | Literal[""] = "") -> PhotoImage: ...
+    def subsample(self, x: int, y: int | Literal[""] = "") -> PhotoImage: ...
+    def get(self, x: int, y: int) -> tuple[int, int, int]: ...
+    def put(
+        self,
+        data: (
+            str
+            | list[str]
+            | list[list[str]]
+            | list[tuple[str, ...]]
+            | tuple[str, ...]
+            | tuple[list[str], ...]
+            | tuple[tuple[str, ...], ...]
+        ),
+        to: tuple[int, int] | None = None,
+    ) -> None: ...
+    def write(self, filename: StrOrBytesPath, format: str | None = None, from_coords: tuple[int, int] | None = None) -> None: ...
+    def transparency_get(self, x: int, y: int) -> bool: ...
+    def transparency_set(self, x: int, y: int, boolean: bool) -> None: ...
+
+class BitmapImage(Image, _BitmapImageLike):
+    # This should be kept in sync with PIL.ImageTK.BitmapImage.__init__()
+    def __init__(
+        self,
+        name: Incomplete | None = None,
+        cnf: dict[str, Any] = {},
+        master: Misc | _tkinter.TkappType | None = None,
+        *,
+        background: str = ...,
+        data: str | bytes = ...,
+        file: StrOrBytesPath = ...,
+        foreground: str = ...,
+        maskdata: str = ...,
+        maskfile: StrOrBytesPath = ...,
+    ) -> None: ...
+
+def image_names() -> tuple[str, ...]: ...
+def image_types() -> tuple[str, ...]: ...
+
+class Spinbox(Widget, XView):
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        activebackground: str = ...,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        buttonbackground: str = ...,
+        buttoncursor: _Cursor = "",
+        buttondownrelief: _Relief = ...,
+        buttonuprelief: _Relief = ...,
+        # percent substitutions don't seem to be supported, it's similar to Entry's validation stuff
+        command: Callable[[], object] | str | list[str] | tuple[str, ...] = "",
+        cursor: _Cursor = "xterm",
+        disabledbackground: str = ...,
+        disabledforeground: str = ...,
+        exportselection: bool = True,
+        fg: str = ...,
+        font: _FontDescription = "TkTextFont",
+        foreground: str = ...,
+        format: str = "",
+        from_: float = 0.0,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        increment: float = 1.0,
+        insertbackground: str = ...,
+        insertborderwidth: _ScreenUnits = 0,
+        insertofftime: int = 300,
+        insertontime: int = 600,
+        insertwidth: _ScreenUnits = ...,
+        invalidcommand: _EntryValidateCommand = "",
+        invcmd: _EntryValidateCommand = "",
+        justify: Literal["left", "center", "right"] = "left",
+        name: str = ...,
+        readonlybackground: str = ...,
+        relief: _Relief = "sunken",
+        repeatdelay: int = 400,
+        repeatinterval: int = 100,
+        selectbackground: str = ...,
+        selectborderwidth: _ScreenUnits = ...,
+        selectforeground: str = ...,
+        state: Literal["normal", "disabled", "readonly"] = "normal",
+        takefocus: _TakeFocusValue = "",
+        textvariable: Variable = ...,
+        to: float = 0.0,
+        validate: Literal["none", "focus", "focusin", "focusout", "key", "all"] = "none",
+        validatecommand: _EntryValidateCommand = "",
+        vcmd: _EntryValidateCommand = "",
+        values: list[str] | tuple[str, ...] = ...,
+        width: int = 20,
+        wrap: bool = False,
+        xscrollcommand: _XYScrollCommand = "",
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        activebackground: str = ...,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        buttonbackground: str = ...,
+        buttoncursor: _Cursor = ...,
+        buttondownrelief: _Relief = ...,
+        buttonuprelief: _Relief = ...,
+        command: Callable[[], object] | str | list[str] | tuple[str, ...] = ...,
+        cursor: _Cursor = ...,
+        disabledbackground: str = ...,
+        disabledforeground: str = ...,
+        exportselection: bool = ...,
+        fg: str = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        format: str = ...,
+        from_: float = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        increment: float = ...,
+        insertbackground: str = ...,
+        insertborderwidth: _ScreenUnits = ...,
+        insertofftime: int = ...,
+        insertontime: int = ...,
+        insertwidth: _ScreenUnits = ...,
+        invalidcommand: _EntryValidateCommand = ...,
+        invcmd: _EntryValidateCommand = ...,
+        justify: Literal["left", "center", "right"] = ...,
+        readonlybackground: str = ...,
+        relief: _Relief = ...,
+        repeatdelay: int = ...,
+        repeatinterval: int = ...,
+        selectbackground: str = ...,
+        selectborderwidth: _ScreenUnits = ...,
+        selectforeground: str = ...,
+        state: Literal["normal", "disabled", "readonly"] = ...,
+        takefocus: _TakeFocusValue = ...,
+        textvariable: Variable = ...,
+        to: float = ...,
+        validate: Literal["none", "focus", "focusin", "focusout", "key", "all"] = ...,
+        validatecommand: _EntryValidateCommand = ...,
+        vcmd: _EntryValidateCommand = ...,
+        values: list[str] | tuple[str, ...] = ...,
+        width: int = ...,
+        wrap: bool = ...,
+        xscrollcommand: _XYScrollCommand = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+    def bbox(self, index) -> tuple[int, int, int, int] | None: ...  # type: ignore[override]
+    def delete(self, first, last: Incomplete | None = None) -> Literal[""]: ...
+    def get(self) -> str: ...
+    def icursor(self, index): ...
+    def identify(self, x: int, y: int) -> Literal["", "buttondown", "buttonup", "entry"]: ...
+    def index(self, index: str | int) -> int: ...
+    def insert(self, index: str | int, s: str) -> Literal[""]: ...
+    # spinbox.invoke("asdf") gives error mentioning .invoke("none"), but it's not documented
+    def invoke(self, element: Literal["none", "buttonup", "buttondown"]) -> Literal[""]: ...
+    def scan(self, *args): ...
+    def scan_mark(self, x): ...
+    def scan_dragto(self, x): ...
+    def selection(self, *args) -> tuple[int, ...]: ...
+    def selection_adjust(self, index): ...
+    def selection_clear(self): ...
+    def selection_element(self, element: Incomplete | None = None): ...
+    def selection_from(self, index: int) -> None: ...
+    def selection_present(self) -> None: ...
+    def selection_range(self, start: int, end: int) -> None: ...
+    def selection_to(self, index: int) -> None: ...
+
+class LabelFrame(Widget):
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        background: str = ...,
+        bd: _ScreenUnits = 2,
+        bg: str = ...,
+        border: _ScreenUnits = 2,
+        borderwidth: _ScreenUnits = 2,
+        class_: str = "Labelframe",  # can't be changed with configure()
+        colormap: Literal["new", ""] | Misc = "",  # can't be changed with configure()
+        container: bool = False,  # undocumented, can't be changed with configure()
+        cursor: _Cursor = "",
+        fg: str = ...,
+        font: _FontDescription = "TkDefaultFont",
+        foreground: str = ...,
+        height: _ScreenUnits = 0,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = 0,
+        # 'ne' and 'en' are valid labelanchors, but only 'ne' is a valid _Anchor.
+        labelanchor: Literal["nw", "n", "ne", "en", "e", "es", "se", "s", "sw", "ws", "w", "wn"] = "nw",
+        labelwidget: Misc = ...,
+        name: str = ...,
+        padx: _ScreenUnits = 0,
+        pady: _ScreenUnits = 0,
+        relief: _Relief = "groove",
+        takefocus: _TakeFocusValue = 0,
+        text: float | str = "",
+        visual: str | tuple[str, int] = "",  # can't be changed with configure()
+        width: _ScreenUnits = 0,
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        cursor: _Cursor = ...,
+        fg: str = ...,
+        font: _FontDescription = ...,
+        foreground: str = ...,
+        height: _ScreenUnits = ...,
+        highlightbackground: str = ...,
+        highlightcolor: str = ...,
+        highlightthickness: _ScreenUnits = ...,
+        labelanchor: Literal["nw", "n", "ne", "en", "e", "es", "se", "s", "sw", "ws", "w", "wn"] = ...,
+        labelwidget: Misc = ...,
+        padx: _ScreenUnits = ...,
+        pady: _ScreenUnits = ...,
+        relief: _Relief = ...,
+        takefocus: _TakeFocusValue = ...,
+        text: float | str = ...,
+        width: _ScreenUnits = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+
+class PanedWindow(Widget):
+    def __init__(
+        self,
+        master: Misc | None = None,
+        cnf: dict[str, Any] | None = {},
+        *,
+        background: str = ...,
+        bd: _ScreenUnits = 1,
+        bg: str = ...,
+        border: _ScreenUnits = 1,
+        borderwidth: _ScreenUnits = 1,
+        cursor: _Cursor = "",
+        handlepad: _ScreenUnits = 8,
+        handlesize: _ScreenUnits = 8,
+        height: _ScreenUnits = "",
+        name: str = ...,
+        opaqueresize: bool = True,
+        orient: Literal["horizontal", "vertical"] = "horizontal",
+        proxybackground: str = "",
+        proxyborderwidth: _ScreenUnits = 2,
+        proxyrelief: _Relief = "flat",
+        relief: _Relief = "flat",
+        sashcursor: _Cursor = "",
+        sashpad: _ScreenUnits = 0,
+        sashrelief: _Relief = "flat",
+        sashwidth: _ScreenUnits = 3,
+        showhandle: bool = False,
+        width: _ScreenUnits = "",
+    ) -> None: ...
+    @overload
+    def configure(
+        self,
+        cnf: dict[str, Any] | None = None,
+        *,
+        background: str = ...,
+        bd: _ScreenUnits = ...,
+        bg: str = ...,
+        border: _ScreenUnits = ...,
+        borderwidth: _ScreenUnits = ...,
+        cursor: _Cursor = ...,
+        handlepad: _ScreenUnits = ...,
+        handlesize: _ScreenUnits = ...,
+        height: _ScreenUnits = ...,
+        opaqueresize: bool = ...,
+        orient: Literal["horizontal", "vertical"] = ...,
+        proxybackground: str = ...,
+        proxyborderwidth: _ScreenUnits = ...,
+        proxyrelief: _Relief = ...,
+        relief: _Relief = ...,
+        sashcursor: _Cursor = ...,
+        sashpad: _ScreenUnits = ...,
+        sashrelief: _Relief = ...,
+        sashwidth: _ScreenUnits = ...,
+        showhandle: bool = ...,
+        width: _ScreenUnits = ...,
+    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
+    @overload
+    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
+    config = configure
+    def add(self, child: Widget, **kw) -> None: ...
+    def remove(self, child) -> None: ...
+    forget: Incomplete
+    def identify(self, x: int, y: int): ...
+    def proxy(self, *args): ...
+    def proxy_coord(self): ...
+    def proxy_forget(self): ...
+    def proxy_place(self, x, y): ...
+    def sash(self, *args): ...
+    def sash_coord(self, index): ...
+    def sash_mark(self, index): ...
+    def sash_place(self, index, x, y): ...
+    def panecget(self, child, option): ...
+    def paneconfigure(self, tagOrId, cnf: Incomplete | None = None, **kw): ...
+    paneconfig: Incomplete
+    def panes(self): ...
+
+def _test() -> None: ...