igs-slm 0.1.0b0__py3-none-any.whl

slm/jinja2/slm/sitelog/legacy.log

@@ -0,0 +1,346 @@
+     {{site.name}} Site Information Form (site log)
+     International GNSS Service
+     See Instructions at:
+       https://files.igs.org/pub/station/general/sitelog_instr.txt
+
+0.   Form
+
+     Prepared by (full name)  : {{ form.prepared_by }}
+     Date Prepared            : {% if form %}{{ form.date_prepared|simple_utc }}{% else %}(CCYY-MM-DD){% endif %}
+     Report Type              : {% if form %}{{ form.report_type }}{% else %}(NEW/UPDATE){% endif %}
+     If Update:
+      Previous Site Log       : {% if form %}{{ form.previous_log }}{% else %}(ssss_ccyymmdd.log){% endif %}
+      Modified/Added Sections : {% if form %}{{ form.modified_section|multi_line}}{% else %}(n.n,n.n,...){% endif %}
+
+
+1.   Site Identification of the GNSS Monument
+
+     Site Name                : {{ identification.site_name }}
+     Four Character ID        : {% if identification %}{{ identification.four_character_id}}{% else %}(A4){% endif %}
+     Monument Inscription     : {{ identification.monument_inscription }}
+     IERS DOMES Number        : {% if identification %}{{ identification.iers_domes_number }}{% else %}(A9){% endif %}
+     CDP Number               : {% if identification %}{{ identification.cdp_number }}{% else %}(A4){% endif %}
+     Monument Description     : {% if identification %}{{ identification.monument_description }}{% else %}(PILLAR/BRASS PLATE/STEEL MAST/etc){% endif %}
+       Height of the Monument : {% if identification %}{{ identification.monument_height|none2empty(" m") }}{% else %}(m){% endif %}
+       Monument Foundation    : {% if identification %}{{ identification.monument_foundation }}{% else %}(STEEL RODS, CONCRETE BLOCK, ROOF, etc){% endif %}
+       Foundation Depth       : {% if identification %}{{ identification.foundation_depth|none2empty(" m") }}{% else %}(m){% endif %}
+     Marker Description       : {% if identification %}{{ identification.marker_description }}{% else %}(CHISELLED CROSS/DIVOT/BRASS NAIL/etc){% endif %}
+     Date Installed           : {% if identification %}{{ identification.date_installed|iso_utc }}{% else %}(CCYY-MM-DDThh:mmZ){% endif %}
+     Geologic Characteristic  : {% if identification %}{{ identification.geologic_characteristic }}{% else %}(BEDROCK/CLAY/CONGLOMERATE/GRAVEL/SAND/etc){% endif %}
+       Bedrock Type           : {% if identification %}{{ identification.bedrock_type }}{% else %}(IGNEOUS/METAMORPHIC/SEDIMENTARY){% endif %}
+       Bedrock Condition      : {% if identification %}{{ identification.bedrock_condition }}{% else %}(FRESH/JOINTED/WEATHERED){% endif %}
+       Fracture Spacing       : {% if identification %}{{ identification.fracture_spacing|enum_str|lower }}{% else %}(1-10 cm/11-50 cm/51-200 cm/over 200 cm){% endif %}
+       Fault zones nearby     : {% if identification %}{{ identification.fault_zones }}{% else %}(YES/NO/Name of the zone){% endif %}
+         Distance/activity    : {% if identification %}{{ identification.distance|multi_line }}{% else %}(multiple lines){% endif %}
+     Additional Information   : {% if identification %}{{ identification.additional_information|multi_line }}{% else %}(multiple lines){% endif %}
+
+
+2.   Site Location Information
+
+     City or Town             : {% if location %}{{ location.city }}{% endif %}
+     State or Province        : {% if location %}{{ location.state }}{% endif %}
+     Country                  : {% if location %}{{ location.country|enum_str }}{% endif %}
+     Tectonic Plate           : {% if location %}{{ location.tectonic|enum_str|upper }}{% endif %}
+     Approximate Position (ITRF)
+       X coordinate (m)       : {% if location %}{{ location.xyz.0|precision_full(4) }}{% endif %}
+       Y coordinate (m)       : {% if location %}{{ location.xyz.1|precision_full(4) }}{% endif %}
+       Z coordinate (m)       : {% if location %}{{ location.xyz.2|precision_full(4) }}{% endif %}
+       Latitude (N is +)      : {% if location %}{{ location.llh.0|iso6709(6) }}{% else %}(+/-DDMMSS.SS){% endif %}
+       Longitude (E is +)     : {% if location %}{{ location.llh.1|iso6709(7) }}{% else %}(+/-DDDMMSS.SS){% endif %}
+       Elevation (m)          : {% if location %}{{ location.llh.2|precision_full(1) }}{% else %}(F7.1){% endif %}
+     Additional Information   : {% if location %}{{ location.additional_information|multi_line }}{% else %}(multiple lines){% endif %}
+
+
+3.   GNSS Receiver Information
+{% for rcvr in receiver %}
+3.{{ loop.index|rpad_space(3) }}Receiver Type            : {{ rcvr.receiver_type.model }}
+     Satellite System         : {{ rcvr.satellite_system|satellite_str }}
+     Serial Number            : {{ rcvr.serial_number }}
+     Firmware Version         : {{ rcvr.firmware }}
+     Elevation Cutoff Setting : {% if rcvr.elevation_cutoff is not none %}{{ rcvr.elevation_cutoff|precision(1) }} deg{% endif %}
+     Date Installed           : {% if rcvr.installed %}{{ rcvr.installed|iso_utc }}{% else %}(CCYY-MM-DDThh:mmZ){% endif %}
+     Date Removed             : {% if rcvr.removed %}{{ rcvr.removed|iso_utc }}{% else %}(CCYY-MM-DDThh:mmZ){% endif %}
+     Temperature Stabiliz.    : {% if rcvr.temp_stabilized == False %}none{% else %}{{ rcvr.temp_nominal|format_temp_stab(rcvr.temp_deviation) }}{% endif %}
+     Additional Information   : {{ rcvr.additional_info|multi_line }}
+{% endfor %}
+{% if not receiver or include_templates %}3.x  Receiver Type            : (A20, from rcvr_ant.tab; see instructions)
+     Satellite System         : (GPS+GLO+GAL+BDS+QZSS+SBAS)
+     Serial Number            : (A20, but note the first A5 is used in SINEX)
+     Firmware Version         : (A11)
+     Elevation Cutoff Setting : (deg)
+     Date Installed           : (CCYY-MM-DDThh:mmZ)
+     Date Removed             : (CCYY-MM-DDThh:mmZ)
+     Temperature Stabiliz.    : (none or tolerance in degrees C)
+     Additional Information   : (multiple lines){% endif %}
+
+
+4.   GNSS Antenna Information
+{% for ant in antenna %}
+4.{{ loop.index|rpad_space(3) }}Antenna Type             : {{ ant|antenna_radome }}
+     Serial Number            : {{ ant.serial_number }}
+     Antenna Reference Point  : {{ ant.reference_point.name }}
+     Marker->ARP Up Ecc. (m)  : {{ ant.marker_une.0|precision_full(4) }}
+     Marker->ARP North Ecc(m) : {{ ant.marker_une.1|precision_full(4) }}
+     Marker->ARP East Ecc(m)  : {{ ant.marker_une.2|precision_full(4) }}
+     Alignment from True N    : {% if ant.alignment is not none %}{{ ant.alignment|precision(1)|pos }} deg{% endif %}
+     Antenna Radome Type      : {{ ant.radome_type.model }}
+     Radome Serial Number     : {{ ant.radome_serial_number }}
+     Antenna Cable Type       : {{ ant.cable_type }}
+     Antenna Cable Length     : {% if ant.cable_length is not none %}{{ ant.cable_length|precision(4) }} m{% endif %}
+     Date Installed           : {% if ant.installed %}{{ ant.installed|iso_utc }}{% else %}(CCYY-MM-DDThh:mmZ){% endif %}
+     Date Removed             : {% if ant.removed %}{{ ant.removed|iso_utc }}{% else %}(CCYY-MM-DDThh:mmZ){% endif %}
+     Additional Information   : {{ ant.additional_information|multi_line }}
+{% endfor %}
+{% if not antenna or include_templates %}4.x  Antenna Type             : (A20, from rcvr_ant.tab; see instructions)
+     Serial Number            : (A*, but note the first A5 is used in SINEX)
+     Antenna Reference Point  : (BPA/BCR/XXX from "antenna.gra"; see instr.)
+     Marker->ARP Up Ecc. (m)  : (F8.4)
+     Marker->ARP North Ecc(m) : (F8.4)
+     Marker->ARP East Ecc(m)  : (F8.4)
+     Alignment from True N    : (deg; + is clockwise/east)
+     Antenna Radome Type      : (A4 from rcvr_ant.tab; see instructions)
+     Radome Serial Number     :
+     Antenna Cable Type       : (vendor & type number)
+     Antenna Cable Length     : (m)
+     Date Installed           : (CCYY-MM-DDThh:mmZ)
+     Date Removed             : (CCYY-MM-DDThh:mmZ)
+     Additional Information   : (multiple lines){% endif %}
+
+
+5.   Surveyed Local Ties
+{% for tie in surveyedlocalties %}
+5.{{ loop.index|rpad_space(3) }}Tied Marker Name         : {{ tie.name }}
+     Tied Marker Usage        : {{ tie.usage }}
+     Tied Marker CDP Number   : {{ tie.cdp_number }}
+     Tied Marker DOMES Number : {{ tie.domes_number }}
+     Differential Components from GNSS Marker to the tied monument (ITRS)
+       dx (m)                 : {% if tie.diff_xyz is not none %}{{ tie.diff_xyz.0|precision_full(3) }}{% endif %}
+       dy (m)                 : {% if tie.diff_xyz is not none %}{{ tie.diff_xyz.1|precision_full(3) }}{% endif %}
+       dz (m)                 : {% if tie.diff_xyz is not none %}{{ tie.diff_xyz.2|precision_full(3) }}{% endif %}
+     Accuracy (mm)            : {% if tie.accuracy is not none %}{{ tie.accuracy|precision(0) }}{% endif %}
+     Survey method            : {{ tie.survey_method }}
+     Date Measured            : {% if tie.measured %}{{ tie.measured|iso_utc }}{% else %}(CCYY-MM-DDThh:mmZ){% endif %}
+     Additional Information   : {{ tie.additional_information|multi_line }}
+{% endfor %}
+{% if not surveyedlocalties or include_templates %}5.x  Tied Marker Name         :
+     Tied Marker Usage        : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc)
+     Tied Marker CDP Number   : (A4)
+     Tied Marker DOMES Number : (A9)
+     Differential Components from GNSS Marker to the tied monument (ITRS)
+       dx (m)                 : (m)
+       dy (m)                 : (m)
+       dz (m)                 : (m)
+     Accuracy (mm)            : (mm)
+     Survey method            : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc)
+     Date Measured            : (CCYY-MM-DDThh:mmZ)
+     Additional Information   : (multiple lines){% endif %}
+
+
+6.   Frequency Standard
+{% for standard in frequencystandard %}
+6.{{ loop.index|rpad_space(3) }}Standard Type            : {{ standard.standard_type|enum_str|upper }}
+       Input Frequency        : {% if standard.input_frequency is not none %}{{ standard.input_frequency }} MHz{% endif %}
+       Effective Dates        : {% if standard.effective_start %}{{standard.effective_start|simple_utc}}{% else %}CCYY-MM-DD{% endif %}/{% if standard.effective_end %}{{standard.effective_end|simple_utc}}{% else %}CCYY-MM-DD{% endif %}
+       Notes                  : {{ standard.notes|multi_line }}
+{% endfor %}
+{% if not frequencystandard or include_templates %}6.x  Standard Type            : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc)
+       Input Frequency        : (if external)
+       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
+       Notes                  : (multiple lines){% endif %}
+
+
+7.   Collocation Information
+{% for colloc in collocation %}
+7.{{ loop.index|rpad_space(3) }}Instrumentation Type     : {{ colloc.instrument_type}}
+       Status                 : {{ colloc.status|enum_str|upper }}
+       Effective Dates        : {% if colloc.effective_start %}{{colloc.effective_start|simple_utc}}{% else %}CCYY-MM-DD{% endif %}/{% if colloc.effective_end %}{{colloc.effective_end|simple_utc}}{% else %}CCYY-MM-DD{% endif %}
+       Notes                  : {{ colloc.notes|multi_line }}
+{% endfor %}
+{% if not collocation or include_templates %}7.x  Instrumentation Type     : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc)
+       Status                 : (PERMANENT/MOBILE)
+       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
+       Notes                  : (multiple lines){% endif %}
+
+
+8.   Meteorological Instrumentation
+{% for sensor in humiditysensor %}
+8.1.{{ loop.index }} Humidity Sensor Model   : {{ sensor.model }}
+       Manufacturer           : {{ sensor.manufacturer }}
+       Serial Number          : {{ sensor.serial_number }}
+       Data Sampling Interval : {% if sensor.sampling_interval is not none %}{{ sensor.sampling_interval}} sec{% endif %}
+       Accuracy (% rel h)     : {% if sensor.accuracy is not none %}{{ sensor.accuracy|precision(1) }}{% endif %}
+       Aspiration             : {{ sensor.aspiration|enum_str|upper }}
+       Height Diff to Ant     : {% if sensor.height_diff is not none %}{{ sensor.height_diff }} m{% endif %}
+       Calibration date       : {{ sensor.calibration|simple_utc }}
+       Effective Dates        : {% if sensor.effective_start %}{{sensor.effective_start|simple_utc}}{% else %}CCYY-MM-DD{% endif %}/{% if sensor.effective_end %}{{sensor.effective_end|simple_utc}}{% else %}CCYY-MM-DD{% endif %}
+       Notes                  : {{ sensor.notes|multi_line }}
+{% endfor %}
+{% if not humiditysensor or include_templates %}8.1.x Humidity Sensor Model   :
+       Manufacturer           :
+       Serial Number          :
+       Data Sampling Interval : (sec)
+       Accuracy (% rel h)     : (% rel h)
+       Aspiration             : (UNASPIRATED/NATURAL/FAN/etc)
+       Height Diff to Ant     : (m)
+       Calibration date       : (CCYY-MM-DD)
+       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
+       Notes                  : (multiple lines){% endif %}
+{% for sensor in pressuresensor %}
+8.2.{{ loop.index }} Pressure Sensor Model   : {{ sensor.model }}
+       Manufacturer           : {{ sensor.manufacturer }}
+       Serial Number          : {{ sensor.serial_number }}
+       Data Sampling Interval : {% if sensor.sampling_interval is not none %}{{ sensor.sampling_interval}} sec{% endif %}
+       Accuracy               : {% if sensor.accuracy is not none %}{{ sensor.accuracy|precision(2) }} hPa{% endif %}
+       Height Diff to Ant     : {% if sensor.height_diff is not none %}{{ sensor.height_diff }} m{% endif %}
+       Calibration date       : {{ sensor.calibration|simple_utc }}
+       Effective Dates        : {% if sensor.effective_start %}{{sensor.effective_start|simple_utc}}{% else %}CCYY-MM-DD{% endif %}/{% if sensor.effective_end %}{{sensor.effective_end|simple_utc}}{% else %}CCYY-MM-DD{% endif %}
+       Notes                  : {{ sensor.notes|multi_line }}
+{% endfor %}
+{% if not pressuresensor or include_templates %}8.2.x Pressure Sensor Model   :
+       Manufacturer           :
+       Serial Number          :
+       Data Sampling Interval : (sec)
+       Accuracy               : (hPa)
+       Height Diff to Ant     : (m)
+       Calibration date       : (CCYY-MM-DD)
+       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
+       Notes                  : (multiple lines){% endif %}
+{% for sensor in temperaturesensor %}
+8.3.{{ loop.index }} Temp. Sensor Model      : {{ sensor.model }}
+       Manufacturer           : {{ sensor.manufacturer }}
+       Serial Number          : {{ sensor.serial_number }}
+       Data Sampling Interval : {% if sensor.sampling_interval is not none %}{{ sensor.sampling_interval}} sec{% endif %}
+       Accuracy               : {% if sensor.accuracy is not none %}{{ sensor.accuracy|precision(1) }} deg C{% endif %}
+       Aspiration             : {{ sensor.aspiration|enum_str|upper }}
+       Height Diff to Ant     : {% if sensor.height_diff is not none %}{{ sensor.height_diff }} m{% endif %}
+       Calibration date       : {{ sensor.calibration|simple_utc }}
+       Effective Dates        : {% if sensor.effective_start %}{{sensor.effective_start|simple_utc}}{% else %}CCYY-MM-DD{% endif %}/{% if sensor.effective_end %}{{sensor.effective_end|simple_utc}}{% else %}CCYY-MM-DD{% endif %}
+       Notes                  : {{ sensor.notes|multi_line }}
+{% endfor %}
+{% if not temperaturesensor or include_templates %}8.3.x Temp. Sensor Model      :
+       Manufacturer           :
+       Serial Number          :
+       Data Sampling Interval : (sec)
+       Accuracy               : (deg C)
+       Aspiration             : (UNASPIRATED/NATURAL/FAN/etc)
+       Height Diff to Ant     : (m)
+       Calibration date       : (CCYY-MM-DD)
+       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
+       Notes                  : (multiple lines){% endif %}
+{% for sensor in watervaporradiometer %}
+8.4.{{ loop.index }} Water Vapor Radiometer  : {{ sensor.model }}
+       Manufacturer           : {{ sensor.manufacturer }}
+       Serial Number          : {{ sensor.serial_number }}
+       Distance to Antenna    : {% if sensor.distance_to_antenna is not none %}{{sensor.distance_to_antenna}} m{% endif %}
+       Height Diff to Ant     : {% if sensor.height_diff is not none %}{{ sensor.height_diff }} m{% endif %}
+       Calibration date       : {{ sensor.calibration|simple_utc }}
+       Effective Dates        : {% if sensor.effective_start %}{{sensor.effective_start|simple_utc}}{% else %}CCYY-MM-DD{% endif %}/{% if sensor.effective_end %}{{sensor.effective_end|simple_utc}}{% else %}CCYY-MM-DD{% endif %}
+       Notes                  : {{ sensor.notes|multi_line }}
+{% endfor %}
+{% if not watervaporradiometer or include_templates %}8.4.x Water Vapor Radiometer  :
+       Manufacturer           :
+       Serial Number          :
+       Distance to Antenna    : (m)
+       Height Diff to Ant     : (m)
+       Calibration date       : (CCYY-MM-DD)
+       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
+       Notes                  : (multiple lines){% endif %}
+{% for instrument in otherinstrumentation %}
+8.5.{{ loop.index }} Other Instrumentation   : {{ instrument.instrumentation|multi_line }}
+{% endfor %}
+{% if not otherinstrumentation or include_templates %}8.5.x Other Instrumentation   : (multiple lines){% endif %}
+
+
+9.  Local Ongoing Conditions Possibly Affecting Computed Position
+{% for condition in radiointerferences %}
+9.1.{{ loop.index }} Radio Interferences     : {{ condition.interferences }}
+       Observed Degradations  : {{ condition.degradations }}
+       Effective Dates        : {% if condition.effective_start %}{{condition.effective_start|simple_utc}}{% else %}CCYY-MM-DD{% endif %}/{% if condition.effective_end %}{{condition.effective_end|simple_utc}}{% else %}CCYY-MM-DD{% endif %}
+       Additional Information : {{ condition.additional_information|multi_line }}
+{% endfor %}
+{% if not radiointerferences or include_templates %}9.1.x Radio Interferences     : (TV/CELL PHONE ANTENNA/RADAR/etc)
+       Observed Degradations  : (SN RATIO/DATA GAPS/etc)
+       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
+       Additional Information : (multiple lines){% endif %}
+{% for condition in multipathsources %}
+9.2.{{ loop.index }} Multipath Sources       : {{ condition.sources}}
+       Effective Dates        : {% if condition.effective_start %}{{condition.effective_start|simple_utc}}{% else %}CCYY-MM-DD{% endif %}/{% if condition.effective_end %}{{condition.effective_end|simple_utc}}{% else %}CCYY-MM-DD{% endif %}
+       Additional Information : {{ condition.additional_information|multi_line }}
+{% endfor %}
+{% if not multipathsources or include_templates %}9.2.x Multipath Sources       : (METAL ROOF/DOME/VLBI ANTENNA/etc)
+       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
+       Additional Information : (multiple lines){% endif %}
+{% for condition in signalobstructions %}
+9.3.{{ loop.index }} Signal Obstructions     : {{ condition.obstructions }}
+       Effective Dates        : {% if condition.effective_start %}{{condition.effective_start|simple_utc}}{% else %}CCYY-MM-DD{% endif %}/{% if condition.effective_end %}{{condition.effective_end|simple_utc}}{% else %}CCYY-MM-DD{% endif %}
+       Additional Information : {{ condition.additional_information|multi_line }}
+{% endfor %}
+{% if not signalobstructions or include_templates %}9.3.x Signal Obstructions     : (TREES/BUILDINGS/etc)
+       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
+       Additional Information : (multiple lines){% endif %}
+
+
+10.  Local Episodic Effects Possibly Affecting Data Quality
+{% for effect in localepisodiceffects %}
+10.{{ loop.index }} Date                     : {% if effect.effective_start %}{{effect.effective_start|simple_utc}}{% else %}CCYY-MM-DD{% endif %}/{% if effect.effective_end %}{{effect.effective_end|simple_utc}}{% else %}CCYY-MM-DD{% endif %}
+     Event                    : {{ effect.event|multi_line }}
+{% endfor %}
+{% if not localepisodiceffects or include_templates %}10.x Date                     : (CCYY-MM-DD/CCYY-MM-DD)
+     Event                    : (TREE CLEARING/CONSTRUCTION/etc){% endif %}
+
+
+11.   On-Site, Point of Contact Agency Information
+
+     Agency                   : {% if operationalcontact and operationalcontact.agency %}{{ operationalcontact.agency|multi_line }}{% else %}(multiple lines){% endif %}
+     Preferred Abbreviation   : {% if operationalcontact and operationalcontact.preferred_abbreviation %}{{ operationalcontact.preferred_abbreviation }}{% else %}(A10){% endif %}
+     Mailing Address          : {% if operationalcontact and operationalcontact.mailing_address %}{{ operationalcontact.mailing_address|multi_line }}{% else %}(multiple lines){% endif %}
+     Primary Contact
+       Contact Name           : {% if operationalcontact %}{{ operationalcontact.primary_name }}{% endif %}
+       Telephone (primary)    : {% if operationalcontact %}{{ operationalcontact.primary_phone1 }}{% endif %}
+       Telephone (secondary)  : {% if operationalcontact %}{{ operationalcontact.primary_phone2 }}{% endif %}
+       Fax                    : {% if operationalcontact %}{{ operationalcontact.primary_fax }}{% endif %}
+       E-mail                 : {% if operationalcontact %}{{ operationalcontact.primary_email }}{% endif %}
+     Secondary Contact
+       Contact Name           : {% if operationalcontact %}{{ operationalcontact.secondary_name }}{% endif %}
+       Telephone (primary)    : {% if operationalcontact %}{{ operationalcontact.secondary_phone1 }}{% endif %}
+       Telephone (secondary)  : {% if operationalcontact %}{{ operationalcontact.secondary_phone2 }}{% endif %}
+       Fax                    : {% if operationalcontact %}{{ operationalcontact.secondary_fax }}{% endif %}
+       E-mail                 : {% if operationalcontact %}{{ operationalcontact.secondary_email }}{% endif %}
+     Additional Information   : {% if operationalcontact %}{{ operationalcontact.additional_information|multi_line }}{% else %}(multiple lines){% endif %}
+
+
+12.  Responsible Agency (if different from 11.)
+
+     Agency                   : {% if responsibleagency and responsibleagency.agency %}{{ responsibleagency.agency|multi_line }}{% else %}(multiple lines){% endif %}
+     Preferred Abbreviation   : {% if responsibleagency and responsibleagency.preferred_abbreviation %}{{ responsibleagency.preferred_abbreviation }}{% else %}(A10){% endif %}
+     Mailing Address          : {% if responsibleagency and responsibleagency.mailing_address %}{{ responsibleagency.mailing_address|multi_line }}{% else %}(multiple lines){% endif %}
+     Primary Contact
+       Contact Name           : {% if responsibleagency %}{{ responsibleagency.primary_name }}{% endif %}
+       Telephone (primary)    : {% if responsibleagency %}{{ responsibleagency.primary_phone1 }}{% endif %}
+       Telephone (secondary)  : {% if responsibleagency %}{{ responsibleagency.primary_phone2 }}{% endif %}
+       Fax                    : {% if responsibleagency %}{{ responsibleagency.primary_fax }}{% endif %}
+       E-mail                 : {% if responsibleagency %}{{ responsibleagency.primary_email }}{% endif %}
+     Secondary Contact
+       Contact Name           : {% if responsibleagency %}{{ responsibleagency.secondary_name }}{% endif %}
+       Telephone (primary)    : {% if responsibleagency %}{{ responsibleagency.secondary_phone1 }}{% endif %}
+       Telephone (secondary)  : {% if responsibleagency %}{{ responsibleagency.secondary_phone2 }}{% endif %}
+       Fax                    : {% if responsibleagency %}{{ responsibleagency.secondary_fax }}{% endif %}
+       E-mail                 : {% if responsibleagency %}{{ responsibleagency.secondary_email }}{% endif %}
+     Additional Information   : {% if responsibleagency %}{{ responsibleagency.additional_information|multi_line }}{% else %}(multiple lines){% endif %}
+
+
+13.  More Information
+
+     Primary Data Center      : {% if moreinformation %}{{ moreinformation.primary }}{% endif %}
+     Secondary Data Center    : {% if moreinformation %}{{ moreinformation.secondary }}{% endif %}
+     URL for More Information : {% if moreinformation %}{{ moreinformation.more_info }}{% endif %}
+     Hardcopy on File
+       Site Map               : {% if moreinformation %}{{ moreinformation.sitemap }}{% else %}(Y or URL){% endif %}
+       Site Diagram           : {% if moreinformation %}{{ moreinformation.site_diagram }}{% else %}(Y or URL){% endif %}
+       Horizon Mask           : {% if moreinformation %}{{ moreinformation.horizon_mask }}{% else %}(Y or URL){% endif %}
+       Monument Description   : {% if moreinformation %}{{ moreinformation.monument_description }}{% else %}(Y or URL){% endif %}
+       Site Pictures          : {% if moreinformation %}{{ moreinformation.site_picture }}{% else %}(Y or URL){% endif %}
+     Additional Information   : {% if moreinformation %}{{ moreinformation.additional_information|multi_line }}{% else %}(multiple lines){% endif %}
+     Antenna Graphics with Dimensions
+
+{% if graphic %}{{ graphic }}{% else %}     (insert text graphic from file antenna.gra){% endif %}

slm/jinja2/slm/sitelog/xsd/0.4/collocationInformation.xml

@@ -0,0 +1,12 @@
+<geo:CollocationInformation gml:id="collocation-information-{{ count }}">
+    <geo:instrumentationType codeSpace="urn:ga-gov-au:collocation-information-type">{{ colloc.instrument_type}}</geo:instrumentationType>
+    <geo:status codeSpace="urn:ga-gov-au:collocation-information-type">{{ colloc.status|enum_str|upper }}</geo:status>
+    <gml:validTime>
+        <gml:TimePeriod gml:id="collocation-information-{{ count }}-time-period-1">
+            <gml:beginPosition>{{colloc.effective_start|simple_utc}}</gml:beginPosition>
+            <gml:endPosition>{{colloc.effective_end|simple_utc}}</gml:endPosition>
+        </gml:TimePeriod>
+    </gml:validTime>
+    {% if colloc.notes %}<geo:notes>{{ colloc.notes }}</geo:notes>{% endif %}
+</geo:CollocationInformation>
+<geo:dateInserted>{{ colloc.inserted|iso_utc_full }}</geo:dateInserted>

slm/jinja2/slm/sitelog/xsd/0.4/condition.xml

@@ -0,0 +1,12 @@
+<geo:{{ condition_tag }} gml:id="{{ condition_id }}-{{ count }}">
+    {% block section %}
+    <gml:validTime>
+        <gml:TimePeriod gml:id="{{ condition_id }}-{{ count }}-time-period-1">
+            <gml:beginPosition>{{condition.effective_start|simple_utc}}</gml:beginPosition>
+            <gml:endPosition>{{condition.effective_end|simple_utc}}</gml:endPosition>
+        </gml:TimePeriod>
+    </gml:validTime>
+    <geo:notes>{{ condition.additional_information }}</geo:notes>
+    {% endblock section %}
+</geo:{{ condition_tag }}>
+<geo:dateInserted>{{ condition.inserted|iso_utc_full }}</geo:dateInserted>

slm/jinja2/slm/sitelog/xsd/0.4/contact.xml

@@ -0,0 +1,52 @@
+<gmd:CI_ResponsibleParty>
+    <gmd:individualName>
+        <gco:CharacterString>{{ contact.name }}</gco:CharacterString>
+    </gmd:individualName>
+    <gmd:organisationName>
+        <gco:CharacterString>{{ agency.agency }}</gco:CharacterString>
+    </gmd:organisationName>
+    <gmd:contactInfo>
+        <gmd:CI_Contact>
+            {% if contact.phone1 or contact.phone2 or contact.fax %}
+            <gmd:phone>
+                <gmd:CI_Telephone>
+                    {% if contact.phone1 %}
+                    <gmd:voice>
+                        <gco:CharacterString>{{ contact.phone1 }}</gco:CharacterString>
+                    </gmd:voice>
+                    {% endif %}
+                    {% if contact.phone2 %}
+                    <gmd:voice>
+                        <gco:CharacterString>{{ contact.phone2 }}</gco:CharacterString>
+                    </gmd:voice>
+                    {% endif %}
+                    {% if contact.fax %}
+                    <gmd:facsimile>
+                        <gco:CharacterString>{{ contact.fax }}</gco:CharacterString>
+                    </gmd:facsimile>
+                    {% endif %}
+                </gmd:CI_Telephone>
+            </gmd:phone>
+            {% endif %}
+            {% if agency.mailing_address or contact.email %}
+            <gmd:address>
+                <gmd:CI_Address>
+                    {% if agency.mailing_address %}
+                    <gmd:deliveryPoint>
+                        <gco:CharacterString>{{ agency.mailing_address }}</gco:CharacterString>
+                    </gmd:deliveryPoint>
+                    {% endif %}
+                    {% if contact.email %}
+                    <gmd:electronicMailAddress>
+                        <gco:CharacterString>{{ contact.email }}</gco:CharacterString>
+                    </gmd:electronicMailAddress>
+                    {% endif %}
+                </gmd:CI_Address>
+            </gmd:address>
+            {% endif %}
+        </gmd:CI_Contact>
+    </gmd:contactInfo>
+    <gmd:role>
+        <gmd:CI_RoleCode codeList="http://www.isotc211.org/2005/resources/Codelist/gmxCodelists.xml#CI_RoleCode" codeListValue="{{role_code}}"/>
+    </gmd:role>
+</gmd:CI_ResponsibleParty>

slm/jinja2/slm/sitelog/xsd/0.4/formInformation.xml

@@ -0,0 +1,5 @@
+<geo:FormInformation gml:id="form-info">
+    <geo:preparedBy>{{ form.prepared_by }}</geo:preparedBy>
+    <geo:datePrepared>{{ form.date_prepared|simple_utc }}</geo:datePrepared>
+    <geo:reportType>{{ form.report_type }}</geo:reportType>
+</geo:FormInformation>

slm/jinja2/slm/sitelog/xsd/0.4/frequencyStandard.xml

@@ -0,0 +1,12 @@
+<geo:FrequencyStandard gml:id="frequency-standard-{{ count }}">
+    <geo:standardType codeSpace="urn:ga-gov-au:frequency-standard-type">{{ standard.standard_type|enum_str|upper }}</geo:standardType>
+    {% if standard.input_frequency is not none %}<geo:inputFrequency>{{ standard.input_frequency }}</geo:inputFrequency>{% endif %}
+    <gml:validTime>
+        <gml:TimePeriod gml:id="frequency-standard-{{ count }}-time-period-1">
+            <gml:beginPosition>{{standard.effective_start|simple_utc}}</gml:beginPosition>
+            <gml:endPosition>{{standard.effective_end|simple_utc}}</gml:endPosition>
+        </gml:TimePeriod>
+    </gml:validTime>
+    <geo:notes>{{ standard.notes }}</geo:notes>
+</geo:FrequencyStandard>
+<geo:dateInserted>{{ standard.inserted|iso_utc_full }}</geo:dateInserted>

slm/jinja2/slm/sitelog/xsd/0.4/gnssAntenna.xml

@@ -0,0 +1,16 @@
+<geo:GnssAntenna gml:id="gnss-antenna-{{ count }}">
+    <geo:manufacturerSerialNumber>{{ ant.serial_number }}</geo:manufacturerSerialNumber>
+    <geo:igsModelCode codeList="http://xml.gov.au/icsm/geodesyml/codelists/antenna-receiver-codelists.xml#GeodesyML_GNSSAntennaTypeCode" codeListValue="{{ ant|antenna_codelist }}" codeSpace="urn:xml-gov-au:icsm:egeodesy:0.5">{{ ant|antenna_radome }}</geo:igsModelCode>
+    <geo:antennaReferencePoint codeSpace="urn:ga-gov-au:antenna-reference-point-type">{{ ant.reference_point.name }}</geo:antennaReferencePoint>
+    <geo:marker-arpUpEcc. {% if ant.marker_une is none %}xsi:nil="true"{% endif %}>{{ ant.marker_une.0|precision_full(4) }}</geo:marker-arpUpEcc.>
+    <geo:marker-arpNorthEcc. {% if ant.marker_une is none %}xsi:nil="true"{% endif %}>{{ ant.marker_une.1|precision_full(4) }}</geo:marker-arpNorthEcc.>
+    <geo:marker-arpEastEcc. {% if ant.marker_une is none %}xsi:nil="true"{% endif %}>{{ ant.marker_une.2|precision_full(4) }}</geo:marker-arpEastEcc.>
+    <geo:alignmentFromTrueNorth {% if ant.alignment is none %}xsi:nil="true"{% endif %}>{{ ant.alignment|precision(1)|pos }}</geo:alignmentFromTrueNorth>
+    <geo:antennaRadomeType codeSpace="urn:igs-org:gnss-radome-model-code">{{ ant.radome_type.model }}</geo:antennaRadomeType>
+    <geo:radomeSerialNumber>{{ ant.radome_serial_number }}</geo:radomeSerialNumber>
+    <geo:antennaCableType>{{ ant.cable_type }}</geo:antennaCableType>
+    <geo:antennaCableLength {% if ant.cable_length is none %}xsi:nil="true"{% endif %}>{{ ant.cable_length|precision(4) }}</geo:antennaCableLength>
+    <geo:dateInstalled>{{ ant.installed|iso_utc_full }}</geo:dateInstalled>
+    <geo:dateRemoved>{{ ant.removed|iso_utc_full }}</geo:dateRemoved>
+</geo:GnssAntenna>
+<geo:dateInserted>{{ ant.inserted|iso_utc_full }}</geo:dateInserted>

slm/jinja2/slm/sitelog/xsd/0.4/gnssReceiver.xml

@@ -0,0 +1,11 @@
+<geo:GnssReceiver gml:id="gnss-receiver-{{ count }}">
+    <geo:manufacturerSerialNumber>{{ rcvr.serial_number }}</geo:manufacturerSerialNumber>
+    <geo:igsModelCode codeList="http://xml.gov.au/icsm/geodesyml/codelists/antenna-receiver-codelists.xml#GeodesyML_GNSSReceiverTypeCode" codeListValue="{{ rcvr.receiver_type.model }}" codeSpace="urn:xml-gov-au:icsm:egeodesy:0.5">{{ rcvr.receiver_type.model }}</geo:igsModelCode>
+    <geo:satelliteSystem>{{ rcvr.satellite_system|satellite_str }}</geo:satelliteSystem>
+    <geo:firmwareVersion>{{ rcvr.firmware }}</geo:firmwareVersion>
+    <geo:elevationCutoffSetting {% if rcvr.elevation_cutoff is none %}xsi:nil="true"{% endif %}>{{ rcvr.elevation_cutoff|precision(1) }}</geo:elevationCutoffSetting>
+    <geo:dateInstalled>{{ rcvr.installed|iso_utc_full }}</geo:dateInstalled>
+    <geo:dateRemoved>{{ rcvr.removed|iso_utc_full }}</geo:dateRemoved>
+    <geo:temperatureStabilization {% if not rcvr.temp_stabilized %}xsi:nil="true"{% endif %}>{% if rcvr.temp_deviation is not none %}{{ rcvr.temp_deviation|none2empty }}{% endif %}</geo:temperatureStabilization>
+</geo:GnssReceiver>
+<geo:dateInserted>{{ rcvr.inserted|iso_utc_full }}</geo:dateInserted>

slm/jinja2/slm/sitelog/xsd/0.4/humiditySensor.xml

@@ -0,0 +1,13 @@
+{% set sensor_tag='HumiditySensor' %}
+{% set sensor_id="humidity-sensor" %}
+{% extends "slm/sitelog/xsd/0.4/sensor.xml" %}
+{% block sensor %}
+    {{ super() }}
+        {% block section %}
+        <geo:type codeSpace="urn:ga-gov-au:humidity-sensor-type">{{ sensor.model }}</geo:type>
+        {{ super() }}
+        <geo:dataSamplingInterval>{{ sensor.sampling_interval|none2empty }}</geo:dataSamplingInterval>
+        <geo:accuracy-percentRelativeHumidity>{{ sensor.accuracy|precision(1) }}</geo:accuracy-percentRelativeHumidity>
+        <geo:aspiration>{{ sensor.aspiration|enum_str|upper }}</geo:aspiration>
+        {% endblock section %}
+{% endblock sensor %}

slm/jinja2/slm/sitelog/xsd/0.4/localEpisodicEffect.xml

@@ -0,0 +1,10 @@
+<geo:LocalEpisodicEffect gml:id="local-episodic-effect-{{ count }}">
+    <gml:validTime>
+        <gml:TimePeriod gml:id="local-episodic-effect-{{ count }}-time-period-1">
+            <gml:beginPosition>{{effect.effective_start|simple_utc}}</gml:beginPosition>
+            <gml:endPosition>{{effect.effective_end|simple_utc}}</gml:endPosition>
+        </gml:TimePeriod>
+    </gml:validTime>
+    <geo:event>{{ effect.event }}</geo:event>
+</geo:LocalEpisodicEffect>
+<geo:dateInserted>{{ effect.inserted|iso_utc_full }}</geo:dateInserted>

slm/jinja2/slm/sitelog/xsd/0.4/moreInformation.xml

@@ -0,0 +1,22 @@
+{% if moreinformation -%}
+<geo:MoreInformation gml:id="more-information">
+    <geo:dataCenter>{{ moreinformation.primary }}</geo:dataCenter>
+    <geo:dataCenter>{{ moreinformation.secondary }}</geo:dataCenter>
+    <geo:urlForMoreInformation>{{ moreinformation.more_info }}</geo:urlForMoreInformation>
+    <geo:siteMap>{{ moreinformation.sitemap }}</geo:siteMap>
+    <geo:siteDiagram>{{ moreinformation.site_diagram }}</geo:siteDiagram>
+    <geo:horizonMask>{{ moreinformation.horizon_mask }}</geo:horizonMask>
+    <geo:monumentDescription>{{ moreinformation.monument_description }}</geo:monumentDescription>
+    <geo:sitePictures>{{ moreinformation.site_picture }}</geo:sitePictures>
+    {% if moreinformation.additional_information %}<geo:notes>{{ moreinformation.additional_information }}</geo:notes>{% endif %}
+    <geo:antennaGraphicsWithDimensions/>
+    {% if graphic %}
+    <geo:insertTextGraphicFromAntenna>
+{{ graphic }}
+    </geo:insertTextGraphicFromAntenna>
+    {% else %}
+    <geo:insertTextGraphicFromAntenna/>
+    {% endif %}
+    <geo:DOI codeSpace="urn:ga-gov-au:self.moreInformation-type">TODO</geo:DOI>
+</geo:MoreInformation>
+{%- endif %}

slm/jinja2/slm/sitelog/xsd/0.4/multipathSource.xml

@@ -0,0 +1,10 @@
+{% set condition_tag='MultipathSource' %}
+{% set condition_id="multipath-source" %}
+{% extends "slm/sitelog/xsd/0.4/condition.xml" %}
+{% block condition %}
+{{ super() }}
+    {% block section %}
+    <geo:possibleProblemSource>{{ condition.sources }}</geo:possibleProblemSource>
+    {{ super() }}
+    {% endblock section %}
+{% endblock condition %}

slm/jinja2/slm/sitelog/xsd/0.4/otherInstrumentation.xml

@@ -0,0 +1,5 @@
+<geo:OtherInstrumentation gml:id="other-instrumentation-{{ count }}">
+    <geo:instrumentation>{{ instrument.instrumentation }}</geo:instrumentation>
+    <gml:validTime/>
+</geo:OtherInstrumentation>
+<geo:dateInserted>{{ instrument.inserted|iso_utc_full }}</geo:dateInserted>

slm/jinja2/slm/sitelog/xsd/0.4/pressureSensor.xml

@@ -0,0 +1,12 @@
+{% set sensor_tag='PressureSensor' %}
+{% set sensor_id="pressure-sensor" %}
+{% extends "slm/sitelog/xsd/0.4/sensor.xml" %}
+{% block sensor %}
+    {{ super() }}
+        {% block section %}
+        <geo:type codeSpace="urn:ga-gov-au:pressure-sensor-type">{{ sensor.model }}</geo:type>
+        {{ super() }}
+        <geo:dataSamplingInterval>{{ sensor.sampling_interval|none2empty }}</geo:dataSamplingInterval>
+        <geo:accuracy-hPa>{{ sensor.accuracy|precision(2) }}</geo:accuracy-hPa>
+        {% endblock section %}
+{% endblock sensor %}

slm/jinja2/slm/sitelog/xsd/0.4/radioInterference.xml

@@ -0,0 +1,11 @@
+{% set condition_tag='RadioInterference' %}
+{% set condition_id="radio-interference" %}
+{% extends "slm/sitelog/xsd/0.4/condition.xml" %}
+{% block condition %}
+    {{ super() }}
+        {% block section %}
+        <geo:possibleProblemSource>{{ condition.interferences }}</geo:possibleProblemSource>
+        {{ super() }}
+        <geo:observedDegradation>{{ condition.degradations }}</geo:observedDegradation>
+        {% endblock section %}
+{% endblock condition %}

slm/jinja2/slm/sitelog/xsd/0.4/sensor.xml

@@ -0,0 +1,16 @@
+<geo:{{ sensor_tag }} gml:id="{{ sensor_id }}-{{ count }}">
+    {% block section %}
+    {% if sensor.notes %}<geo:notes>{{ sensor.notes }}</geo:notes>{% endif %}
+    <geo:manufacturer>{{ sensor.manufacturer }}</geo:manufacturer>
+    <geo:serialNumber>{{ sensor.serial_number }}</geo:serialNumber>
+    <geo:heightDiffToAntenna>{{ sensor.height_diff|none2empty }}</geo:heightDiffToAntenna>
+    <geo:calibrationDate>{{ sensor.calibration|simple_utc }}</geo:calibrationDate>
+    <gml:validTime>
+        <gml:TimePeriod gml:id="{{ sensor_id }}-{{ count }}-time-period-1">
+            <gml:beginPosition>{{sensor.effective_start|simple_utc}}</gml:beginPosition>
+            <gml:endPosition>{{sensor.effective_end|simple_utc}}</gml:endPosition>
+        </gml:TimePeriod>
+    </gml:validTime>
+    {% endblock section %}
+</geo:{{ sensor_tag }}>
+<geo:dateInserted>{{ sensor.inserted|iso_utc_full }}</geo:dateInserted>

slm/jinja2/slm/sitelog/xsd/0.4/signalObstruction.xml

@@ -0,0 +1,10 @@
+{% set condition_tag='SignalObstruction' %}
+{% set condition_id="signal-obstruction" %}
+{% extends "slm/sitelog/xsd/0.4/condition.xml" %}
+{% block condition %}
+    {{ super() }}
+        {% block section %}
+        <geo:possibleProblemSource>{{ condition.obstructions }}</geo:possibleProblemSource>
+        {{ super() }}
+        {% endblock section %}
+{% endblock condition %}

slm/jinja2/slm/sitelog/xsd/0.4/siteIdentification.xml

@@ -0,0 +1,22 @@
+{% if identification -%}
+<geo:SiteIdentification gml:id="site-identification">
+    <geo:siteName>{{ identification.site_name }}</geo:siteName>
+    <geo:fourCharacterID>{{ identification.four_character_id}}</geo:fourCharacterID>
+    {% if identification.monument_inscription %}<geo:monumentInscription>{{ identification.monument_inscription }}</geo:monumentInscription>{% endif %}
+    <geo:iersDOMESNumber>{{ identification.iers_domes_number }}</geo:iersDOMESNumber>
+    <geo:cdpNumber>{{ identification.cdp_number }}</geo:cdpNumber>
+    {% if identification.monument_description %}<geo:monumentDescription codeSpace="urn:ga-gov-au:monument-description-type">{{ identification.monument_description }}</geo:monumentDescription>{% endif %}
+    {% if identification.monument_height is not none %}<geo:heightOfTheMonument>{{ identification.monument_height|none2empty }}</geo:heightOfTheMonument>{% endif %}
+    {% if identification.monument_foundation %}<geo:monumentFoundation>{{ identification.monument_foundation }}</geo:monumentFoundation>{% endif %}
+    {% if identification.foundation_depth is not none %}<geo:foundationDepth>{{ identification.foundation_depth|none2empty }}</geo:foundationDepth>{% endif %}
+    {% if identification.marker_description %}<geo:markerDescription>{{ identification.marker_description }}</geo:markerDescription>{% endif %}
+    {% if identification.date_installed %}<geo:dateInstalled>{{ identification.date_installed|iso_utc_full }}</geo:dateInstalled>{% endif %}
+    {% if identification.geologic_characteristic %}<geo:geologicCharacteristic codeSpace="urn:ga-gov-au:geologic-characteristic-type">{{ identification.geologic_characteristic }}</geo:geologicCharacteristic>{% endif %}
+    {% if identification.bedrock_type %}<geo:bedrockType>{{ identification.bedrock_type }}</geo:bedrockType>{% endif %}
+    {% if identification.bedrock_condition %}<geo:bedrockCondition>{{ identification.bedrock_condition }}</geo:bedrockCondition>{% endif %}
+    {% if identification.fracture_spacing %}<geo:fractureSpacing>{{ identification.fracture_spacing|enum_str|lower }}</geo:fractureSpacing>{% endif %}
+    {% if identification.fault_zones %}<geo:faultZonesNearby codeSpace="urn:ga-gov-au:fault-zones-type">{{ identification.fault_zones }}</geo:faultZonesNearby>{% endif %}
+    {% if identification.distance %}<geo:distance-Activity>{{ identification.distance }}</geo:distance-Activity>{% endif %}
+    {% if identification.additional_information %}<geo:notes>{{ identification.additional_information }}</geo:notes>{% endif %}
+</geo:SiteIdentification>
+{%- endif %}