huaweicloudsdkelb 3.0.43rc0__py3-none-any.whl → 3.1.161__py3-none-any.whl

huaweicloudsdkelb/v2/model/member_resp.py

@@ -1,17 +1,12 @@
 # coding: utf-8
 
-import pprint
-import re
-
 import six
 
-
-
+from huaweicloudsdkcore.utils.http_utils import sanitize_for_serialization
 
 
 class MemberResp:
 
-
     """
     Attributes:
       openapi_types (dict): The key is attribute name
@@ -19,7 +14,6 @@ class MemberResp:
       attribute_map (dict): The key is attribute name
                             and the value is json key in definition.
     """
-
     sensitive_list = []
 
     openapi_types = {
@@ -49,7 +43,31 @@ class MemberResp:
     }
 
     def __init__(self, id=None, project_id=None, tenant_id=None, name=None, admin_state_up=None, protocol_port=None, subnet_id=None, address=None, weight=None, operating_status=None):
-        """MemberResp - a model defined in huaweicloud sdk"""
+        r"""MemberResp
+
+        The model defined in huaweicloud sdk
+
+        :param id: 后端云服务器ID
+        :type id: str
+        :param project_id: 后端云服务器所在的项目ID。
+        :type project_id: str
+        :param tenant_id: 后端云服务器所在的项目ID。
+        :type tenant_id: str
+        :param name: 后端云服务器名称。
+        :type name: str
+        :param admin_state_up: 后端云服务器的管理状态；该字段虽然支持创建、更新，但实际取值决定于后端云服务器对应的弹性云服务器是否存在。若存在，该值为true，否则，该值为false。
+        :type admin_state_up: bool
+        :param protocol_port: 后端端口和协议号
+        :type protocol_port: int
+        :param subnet_id: 后端云服务器所在的子网ID。该子网和后端云服务器关联的负载均衡器的子网必须在同一VPC下。只支持指定IPv4的子网ID。暂不支持IPv6。
+        :type subnet_id: str
+        :param address: 后端云服务器的对应的IP地址，这个IP必须在subnet_id字段的子网网段中。例如：192.168.3.11。只能指定为主网卡的IP。
+        :type address: str
+        :param weight: 后端云服务器的权重，请求按权重在同一后端云服务器组下的后端云服务器间分发。权重为0的后端不再接受新的请求。当后端云服务器所在的后端云服务器组的lb_algorithm的取值为SOURCE_IP时，该字段无效。
+        :type weight: int
+        :param operating_status: 后端云服务器的健康状态，取值：  ONLINE：健康检查在线，后端服务正常。 OFFLINE：健康检查离线，后端服务异常，负载均衡器不再向异常的后端发送流量。 NO_MONITOR：无检查检查。未创建检查检查或健康检查的admin_state_up字段为false。 
+        :type operating_status: str
+        """
         
         
 
@@ -78,7 +96,7 @@ class MemberResp:
 
     @property
     def id(self):
-        """Gets the id of this MemberResp.
+        r"""Gets the id of this MemberResp.
 
         后端云服务器ID
 
@@ -89,18 +107,18 @@ class MemberResp:
 
     @id.setter
     def id(self, id):
-        """Sets the id of this MemberResp.
+        r"""Sets the id of this MemberResp.
 
         后端云服务器ID
 
         :param id: The id of this MemberResp.
-        :type: str
+        :type id: str
         """
         self._id = id
 
     @property
     def project_id(self):
-        """Gets the project_id of this MemberResp.
+        r"""Gets the project_id of this MemberResp.
 
         后端云服务器所在的项目ID。
 
@@ -111,18 +129,18 @@ class MemberResp:
 
     @project_id.setter
     def project_id(self, project_id):
-        """Sets the project_id of this MemberResp.
+        r"""Sets the project_id of this MemberResp.
 
         后端云服务器所在的项目ID。
 
         :param project_id: The project_id of this MemberResp.
-        :type: str
+        :type project_id: str
         """
         self._project_id = project_id
 
     @property
     def tenant_id(self):
-        """Gets the tenant_id of this MemberResp.
+        r"""Gets the tenant_id of this MemberResp.
 
         后端云服务器所在的项目ID。
 
@@ -133,18 +151,18 @@ class MemberResp:
 
     @tenant_id.setter
     def tenant_id(self, tenant_id):
-        """Sets the tenant_id of this MemberResp.
+        r"""Sets the tenant_id of this MemberResp.
 
         后端云服务器所在的项目ID。
 
         :param tenant_id: The tenant_id of this MemberResp.
-        :type: str
+        :type tenant_id: str
         """
         self._tenant_id = tenant_id
 
     @property
     def name(self):
-        """Gets the name of this MemberResp.
+        r"""Gets the name of this MemberResp.
 
         后端云服务器名称。
 
@@ -155,20 +173,20 @@ class MemberResp:
 
     @name.setter
     def name(self, name):
-        """Sets the name of this MemberResp.
+        r"""Sets the name of this MemberResp.
 
         后端云服务器名称。
 
         :param name: The name of this MemberResp.
-        :type: str
+        :type name: str
         """
         self._name = name
 
     @property
     def admin_state_up(self):
-        """Gets the admin_state_up of this MemberResp.
+        r"""Gets the admin_state_up of this MemberResp.
 
-        后端云服务器的管理状态；该字段虽然支持创建、更新，但实际取值决定于后端云服务器对应的弹性云服务器是否存在。该字段虽然支持创建、更新，但实际取值决定于member对应的弹性云服务器是否存在。若存在，该值为true，否则，该值为false。
+        后端云服务器的管理状态；该字段虽然支持创建、更新，但实际取值决定于后端云服务器对应的弹性云服务器是否存在。若存在，该值为true，否则，该值为false。
 
         :return: The admin_state_up of this MemberResp.
         :rtype: bool
@@ -177,18 +195,18 @@ class MemberResp:
 
     @admin_state_up.setter
     def admin_state_up(self, admin_state_up):
-        """Sets the admin_state_up of this MemberResp.
+        r"""Sets the admin_state_up of this MemberResp.
 
-        后端云服务器的管理状态；该字段虽然支持创建、更新，但实际取值决定于后端云服务器对应的弹性云服务器是否存在。该字段虽然支持创建、更新，但实际取值决定于member对应的弹性云服务器是否存在。若存在，该值为true，否则，该值为false。
+        后端云服务器的管理状态；该字段虽然支持创建、更新，但实际取值决定于后端云服务器对应的弹性云服务器是否存在。若存在，该值为true，否则，该值为false。
 
         :param admin_state_up: The admin_state_up of this MemberResp.
-        :type: bool
+        :type admin_state_up: bool
         """
         self._admin_state_up = admin_state_up
 
     @property
     def protocol_port(self):
-        """Gets the protocol_port of this MemberResp.
+        r"""Gets the protocol_port of this MemberResp.
 
         后端端口和协议号
 
@@ -199,18 +217,18 @@ class MemberResp:
 
     @protocol_port.setter
     def protocol_port(self, protocol_port):
-        """Sets the protocol_port of this MemberResp.
+        r"""Sets the protocol_port of this MemberResp.
 
         后端端口和协议号
 
         :param protocol_port: The protocol_port of this MemberResp.
-        :type: int
+        :type protocol_port: int
         """
         self._protocol_port = protocol_port
 
     @property
     def subnet_id(self):
-        """Gets the subnet_id of this MemberResp.
+        r"""Gets the subnet_id of this MemberResp.
 
         后端云服务器所在的子网ID。该子网和后端云服务器关联的负载均衡器的子网必须在同一VPC下。只支持指定IPv4的子网ID。暂不支持IPv6。
 
@@ -221,18 +239,18 @@ class MemberResp:
 
     @subnet_id.setter
     def subnet_id(self, subnet_id):
-        """Sets the subnet_id of this MemberResp.
+        r"""Sets the subnet_id of this MemberResp.
 
         后端云服务器所在的子网ID。该子网和后端云服务器关联的负载均衡器的子网必须在同一VPC下。只支持指定IPv4的子网ID。暂不支持IPv6。
 
         :param subnet_id: The subnet_id of this MemberResp.
-        :type: str
+        :type subnet_id: str
         """
         self._subnet_id = subnet_id
 
     @property
     def address(self):
-        """Gets the address of this MemberResp.
+        r"""Gets the address of this MemberResp.
 
         后端云服务器的对应的IP地址，这个IP必须在subnet_id字段的子网网段中。例如：192.168.3.11。只能指定为主网卡的IP。
 
@@ -243,18 +261,18 @@ class MemberResp:
 
     @address.setter
     def address(self, address):
-        """Sets the address of this MemberResp.
+        r"""Sets the address of this MemberResp.
 
         后端云服务器的对应的IP地址，这个IP必须在subnet_id字段的子网网段中。例如：192.168.3.11。只能指定为主网卡的IP。
 
         :param address: The address of this MemberResp.
-        :type: str
+        :type address: str
         """
         self._address = address
 
     @property
     def weight(self):
-        """Gets the weight of this MemberResp.
+        r"""Gets the weight of this MemberResp.
 
         后端云服务器的权重，请求按权重在同一后端云服务器组下的后端云服务器间分发。权重为0的后端不再接受新的请求。当后端云服务器所在的后端云服务器组的lb_algorithm的取值为SOURCE_IP时，该字段无效。
 
@@ -265,18 +283,18 @@ class MemberResp:
 
     @weight.setter
     def weight(self, weight):
-        """Sets the weight of this MemberResp.
+        r"""Sets the weight of this MemberResp.
 
         后端云服务器的权重，请求按权重在同一后端云服务器组下的后端云服务器间分发。权重为0的后端不再接受新的请求。当后端云服务器所在的后端云服务器组的lb_algorithm的取值为SOURCE_IP时，该字段无效。
 
         :param weight: The weight of this MemberResp.
-        :type: int
+        :type weight: int
         """
         self._weight = weight
 
     @property
     def operating_status(self):
-        """Gets the operating_status of this MemberResp.
+        r"""Gets the operating_status of this MemberResp.
 
         后端云服务器的健康状态，取值：  ONLINE：健康检查在线，后端服务正常。 OFFLINE：健康检查离线，后端服务异常，负载均衡器不再向异常的后端发送流量。 NO_MONITOR：无检查检查。未创建检查检查或健康检查的admin_state_up字段为false。 
 
@@ -287,12 +305,12 @@ class MemberResp:
 
     @operating_status.setter
     def operating_status(self, operating_status):
-        """Sets the operating_status of this MemberResp.
+        r"""Sets the operating_status of this MemberResp.
 
         后端云服务器的健康状态，取值：  ONLINE：健康检查在线，后端服务正常。 OFFLINE：健康检查离线，后端服务异常，负载均衡器不再向异常的后端发送流量。 NO_MONITOR：无检查检查。未创建检查检查或健康检查的admin_state_up字段为false。 
 
         :param operating_status: The operating_status of this MemberResp.
-        :type: str
+        :type operating_status: str
         """
         self._operating_status = operating_status
 
@@ -325,10 +343,15 @@ class MemberResp:
 
     def to_str(self):
         """Returns the string representation of the model"""
-        return pprint.pformat(self.to_dict())
+        import simplejson as json
+        if six.PY2:
+            import sys
+            reload(sys)
+            sys.setdefaultencoding("utf-8")
+        return json.dumps(sanitize_for_serialization(self), ensure_ascii=False)
 
     def __repr__(self):
-        """For `print` and `pprint`"""
+        """For `print`"""
         return self.to_str()
 
     def __eq__(self, other):

huaweicloudsdkelb/v2/model/members_in_status_resp.py

@@ -1,17 +1,12 @@
 # coding: utf-8
 
-import pprint
-import re
-
 import six
 
-
-
+from huaweicloudsdkcore.utils.http_utils import sanitize_for_serialization
 
 
 class MembersInStatusResp:
 
-
     """
     Attributes:
       openapi_types (dict): The key is attribute name
@@ -19,7 +14,6 @@ class MembersInStatusResp:
       attribute_map (dict): The key is attribute name
                             and the value is json key in definition.
     """
-
     sensitive_list = []
 
     openapi_types = {
@@ -39,7 +33,21 @@ class MembersInStatusResp:
     }
 
     def __init__(self, id=None, address=None, protocol_port=None, operating_status=None, provisioning_status=None):
-        """MembersInStatusResp - a model defined in huaweicloud sdk"""
+        r"""MembersInStatusResp
+
+        The model defined in huaweicloud sdk
+
+        :param id: 后端云服务器ID
+        :type id: str
+        :param address: 后端云服务器的IP地址
+        :type address: str
+        :param protocol_port: 后端云服务器的端口号
+        :type protocol_port: int
+        :param operating_status: 后端云服务器的健康检状态；可以为：ONLINE：健康检查在线；OFFLINE：健康检查离线；DISABLED：后端云服务器无对应的弹性云服务器；NO_MONITOR：健康检查未开启
+        :type operating_status: str
+        :param provisioning_status: 监听器的配置状态；该字段为预留字段，暂未启用。默认为ACTIVE。
+        :type provisioning_status: str
+        """
         
         
 
@@ -58,7 +66,7 @@ class MembersInStatusResp:
 
     @property
     def id(self):
-        """Gets the id of this MembersInStatusResp.
+        r"""Gets the id of this MembersInStatusResp.
 
         后端云服务器ID
 
@@ -69,18 +77,18 @@ class MembersInStatusResp:
 
     @id.setter
     def id(self, id):
-        """Sets the id of this MembersInStatusResp.
+        r"""Sets the id of this MembersInStatusResp.
 
         后端云服务器ID
 
         :param id: The id of this MembersInStatusResp.
-        :type: str
+        :type id: str
         """
         self._id = id
 
     @property
     def address(self):
-        """Gets the address of this MembersInStatusResp.
+        r"""Gets the address of this MembersInStatusResp.
 
         后端云服务器的IP地址
 
@@ -91,18 +99,18 @@ class MembersInStatusResp:
 
     @address.setter
     def address(self, address):
-        """Sets the address of this MembersInStatusResp.
+        r"""Sets the address of this MembersInStatusResp.
 
         后端云服务器的IP地址
 
         :param address: The address of this MembersInStatusResp.
-        :type: str
+        :type address: str
         """
         self._address = address
 
     @property
     def protocol_port(self):
-        """Gets the protocol_port of this MembersInStatusResp.
+        r"""Gets the protocol_port of this MembersInStatusResp.
 
         后端云服务器的端口号
 
@@ -113,18 +121,18 @@ class MembersInStatusResp:
 
     @protocol_port.setter
     def protocol_port(self, protocol_port):
-        """Sets the protocol_port of this MembersInStatusResp.
+        r"""Sets the protocol_port of this MembersInStatusResp.
 
         后端云服务器的端口号
 
         :param protocol_port: The protocol_port of this MembersInStatusResp.
-        :type: int
+        :type protocol_port: int
         """
         self._protocol_port = protocol_port
 
     @property
     def operating_status(self):
-        """Gets the operating_status of this MembersInStatusResp.
+        r"""Gets the operating_status of this MembersInStatusResp.
 
         后端云服务器的健康检状态；可以为：ONLINE：健康检查在线；OFFLINE：健康检查离线；DISABLED：后端云服务器无对应的弹性云服务器；NO_MONITOR：健康检查未开启
 
@@ -135,18 +143,18 @@ class MembersInStatusResp:
 
     @operating_status.setter
     def operating_status(self, operating_status):
-        """Sets the operating_status of this MembersInStatusResp.
+        r"""Sets the operating_status of this MembersInStatusResp.
 
         后端云服务器的健康检状态；可以为：ONLINE：健康检查在线；OFFLINE：健康检查离线；DISABLED：后端云服务器无对应的弹性云服务器；NO_MONITOR：健康检查未开启
 
         :param operating_status: The operating_status of this MembersInStatusResp.
-        :type: str
+        :type operating_status: str
         """
         self._operating_status = operating_status
 
     @property
     def provisioning_status(self):
-        """Gets the provisioning_status of this MembersInStatusResp.
+        r"""Gets the provisioning_status of this MembersInStatusResp.
 
         监听器的配置状态；该字段为预留字段，暂未启用。默认为ACTIVE。
 
@@ -157,12 +165,12 @@ class MembersInStatusResp:
 
     @provisioning_status.setter
     def provisioning_status(self, provisioning_status):
-        """Sets the provisioning_status of this MembersInStatusResp.
+        r"""Sets the provisioning_status of this MembersInStatusResp.
 
         监听器的配置状态；该字段为预留字段，暂未启用。默认为ACTIVE。
 
         :param provisioning_status: The provisioning_status of this MembersInStatusResp.
-        :type: str
+        :type provisioning_status: str
         """
         self._provisioning_status = provisioning_status
 
@@ -195,10 +203,15 @@ class MembersInStatusResp:
 
     def to_str(self):
         """Returns the string representation of the model"""
-        return pprint.pformat(self.to_dict())
+        import simplejson as json
+        if six.PY2:
+            import sys
+            reload(sys)
+            sys.setdefaultencoding("utf-8")
+        return json.dumps(sanitize_for_serialization(self), ensure_ascii=False)
 
     def __repr__(self):
-        """For `print` and `pprint`"""
+        """For `print`"""
         return self.to_str()
 
     def __eq__(self, other):