homeassistant 2025.9.0b1__py3-none-any.whl → 2025.9.0b3__py3-none-any.whl

homeassistant/components/nut/translations/ga.json

@@ -59,9 +59,32 @@
     },
     "device_automation": {
         "action_type": {
+            "beeper_disable": "D\u00edchumasaigh b\u00edp\u00e9ir/buzzer UPS",
+            "beeper_enable": "Cumasaigh b\u00edp\u00e9ir/buzzer UPS",
+            "beeper_mute": "B\u00edp\u00e9ir/buzzer UPS a mh\u00fachadh go sealadach",
+            "beeper_toggle": "B\u00edp\u00e9ir/buzzer UPS a scor\u00e1naigh",
+            "bypass_start": "Cuir an UPS i m\u00f3d seachbh\u00f3thair",
+            "bypass_stop": "Bain an UPS as m\u00f3d seachbh\u00f3thair",
+            "calibrate_start": "Tosaigh calabr\u00fa ama rithe",
+            "calibrate_stop": "Stop calabr\u00fa ama rithe",
             "load_off": "M\u00fach an t-ualach l\u00e1ithreach",
+            "load_on": "Cas air an ualach l\u00e1ithreach",
+            "reset_input_minmax": "Athshocraigh st\u00e1das voltais ionchuir \u00edosta agus uasta",
+            "reset_watchdog": "Athshocraigh an lasc ama faire (atos\u00fa \u00e9igeantach an ualaigh)",
+            "shutdown_reboot": "M\u00fach an t-ualach go hachomair agus an UPS \u00e1 atos\u00fa",
+            "shutdown_reboot_graceful": "Tar \u00e9is moille, m\u00fach an t-ualach go hachomair agus an UPS \u00e1 atos\u00fa agat",
             "shutdown_return": "M\u00fach an t-ualach b'fh\u00e9idir tar \u00e9is moille agus fill ar ais nuair a bheidh an chumhacht ar ais",
-            "shutdown_stayoff": "M\u00fach an t-ualach b'fh\u00e9idir tar \u00e9is moille agus fan m\u00fachta fi\u00fa m\u00e1 fhilleann an chumhacht"
+            "shutdown_stayoff": "M\u00fach an t-ualach b'fh\u00e9idir tar \u00e9is moille agus fan m\u00fachta fi\u00fa m\u00e1 fhilleann an chumhacht",
+            "shutdown_stop": "Stop m\u00fachadh at\u00e1 ar si\u00fal",
+            "test_battery_start": "Tosaigh t\u00e1st\u00e1il ceallra\u00ed",
+            "test_battery_start_deep": "Tosaigh t\u00e1st\u00e1il dhomhain ceallra\u00ed",
+            "test_battery_start_quick": "Tosaigh t\u00e1st\u00e1il thapa ceallra\u00ed",
+            "test_battery_stop": "Stop an t\u00e1st\u00e1il ceallra\u00ed",
+            "test_failure_start": "Tosaigh cliseadh cumhachta insamhlaithe",
+            "test_failure_stop": "Stop ag insamhladh cliseadh cumhachta",
+            "test_panel_start": "Tosaigh ag t\u00e1st\u00e1il an phain\u00e9il UPS",
+            "test_panel_stop": "Stop t\u00e1st\u00e1il pain\u00e9il UPS",
+            "test_system_start": "Tosaigh t\u00e1st\u00e1il ch\u00f3rais"
         }
     },
     "entity": {
@@ -71,6 +94,9 @@
             }
         },
         "sensor": {
+            "ambient_humidity": {
+                "name": "Taise chomhthimpeallach"
+            },
             "ambient_humidity_status": {
                 "name": "St\u00e1das taise comhthimpeallach",
                 "state": {
@@ -81,6 +107,9 @@
                     "warning-low": "Rabhadh \u00edseal"
                 }
             },
+            "ambient_temperature": {
+                "name": "Teocht chomhthimpeallach"
+            },
             "ambient_temperature_status": {
                 "name": "St\u00e1das teochta comhthimpealla\u00ed",
                 "state": {
@@ -91,6 +120,21 @@
                     "warning-low": "Rabhadh \u00edseal"
                 }
             },
+            "battery_alarm_threshold": {
+                "name": "Tairseach al\u00e1raim ceallra\u00ed"
+            },
+            "battery_capacity": {
+                "name": "Cumas ceallra\u00ed"
+            },
+            "battery_charge": {
+                "name": "Muirear ceallra\u00ed"
+            },
+            "battery_charge_low": {
+                "name": "Pointe socraithe ceallra\u00ed \u00edseal"
+            },
+            "battery_charge_restart": {
+                "name": "\u00cdosmh\u00e9id ceallra\u00ed le tos\u00fa"
+            },
             "battery_charger_status": {
                 "state": {
                     "charging": "Muirear\u00fa",
@@ -190,6 +234,27 @@
             "input_power": {
                 "name": "Cumhacht ionchuir"
             },
+            "input_realpower": {
+                "name": "Cumhacht iarbh\u00edr ionchuir"
+            },
+            "input_sensitivity": {
+                "name": "\u00cdogaireacht chumhachta ionchuir"
+            },
+            "input_transfer_high": {
+                "name": "Aistri\u00fa ardvoltais"
+            },
+            "input_transfer_low": {
+                "name": "Aistri\u00fa \u00edsealvoltais"
+            },
+            "input_transfer_reason": {
+                "name": "C\u00fais aistrithe voltais"
+            },
+            "input_voltage": {
+                "name": "Voltas ionchuir"
+            },
+            "input_voltage_nominal": {
+                "name": "Voltas ionchuir ainmni\u00fail"
+            },
             "input_voltage_status": {
                 "name": "St\u00e1das voltais ionchuir"
             },
@@ -220,6 +285,30 @@
             "outlet_voltage": {
                 "name": "Voltas asraonta"
             },
+            "output_current": {
+                "name": "Sruth aschuir"
+            },
+            "output_current_nominal": {
+                "name": "Sruth aschuir ainmni\u00fail"
+            },
+            "output_frequency": {
+                "name": "Minic\u00edocht aschuir"
+            },
+            "output_frequency_nominal": {
+                "name": "Minic\u00edocht aschuir ainmni\u00fail"
+            },
+            "output_l1_current": {
+                "name": "Aschur reatha L1"
+            },
+            "output_l1_n_voltage": {
+                "name": "Voltas aschuir L1-N"
+            },
+            "output_l1_power_percent": {
+                "name": "\u00das\u00e1id cumhachta aschuir L1"
+            },
+            "output_l1_realpower": {
+                "name": "Aschur L1 f\u00edorchumhacht"
+            },
             "output_l2_current": {
                 "name": "Aschur reatha L2"
             },
@@ -245,14 +334,55 @@
                 "name": "Aschur L3 f\u00edorchumhacht"
             },
             "output_phases": {
+                "name": "C\u00e9imeanna aschuir",
                 "unit_of_measurement": "ch\u00e9im"
             },
+            "output_power": {
+                "name": "Cumhacht dealraitheach aschuir"
+            },
+            "output_power_nominal": {
+                "name": "Cumhacht aschuir ainmni\u00fail"
+            },
+            "output_realpower": {
+                "name": "Aschur f\u00edorchumhachta"
+            },
+            "output_realpower_nominal": {
+                "name": "F\u00edorchumhacht aschuir ainmni\u00fail"
+            },
+            "output_voltage": {
+                "name": "Voltas aschuir"
+            },
+            "output_voltage_nominal": {
+                "name": "Voltas aschuir ainmni\u00fail"
+            },
+            "ups_alarm": {
+                "name": "Al\u00e1raim"
+            },
             "ups_beeper_status": {
+                "name": "St\u00e1das b\u00edp\u00e9ara",
                 "state": {
                     "disabled": "D\u00edchumasaithe",
                     "enabled": "Cumasaithe",
                     "muted": "Balbhaithe"
                 }
+            },
+            "ups_contacts": {
+                "name": "Teagmh\u00e1laithe seachtracha"
+            },
+            "ups_delay_reboot": {
+                "name": "Moill atosaithe UPS"
+            },
+            "ups_delay_shutdown": {
+                "name": "Moill m\u00fachta UPS"
+            },
+            "ups_delay_start": {
+                "name": "Moill atosaithe luchtaithe"
+            },
+            "ups_display_language": {
+                "name": "Teanga"
+            },
+            "ups_efficiency": {
+                "name": "\u00c9ifeacht\u00falacht"
             }
         },
         "switch": {

homeassistant/components/nws/translations/ga.json

@@ -1,4 +1,15 @@
 {
+    "config": {
+        "step": {
+            "user": {
+                "data": {
+                    "station": "C\u00f3d st\u00e1isi\u00fain METAR"
+                },
+                "description": "Mura sonra\u00edtear c\u00f3d st\u00e1isi\u00fain METAR, \u00fas\u00e1idfear an domhanleithead agus an domhanfhad chun an st\u00e1isi\u00fan is gaire a aimsi\u00fa. I l\u00e1thair na huaire, is f\u00e9idir leis an eochair API a bheith rud ar bith. Moltar seoladh r\u00edomhphoist bail\u00ed a \u00fas\u00e1id.",
+                "title": "Ceangail leis an tSeirbh\u00eds Aimsire N\u00e1isi\u00fanta"
+            }
+        }
+    },
     "selector": {
         "nws_forecast_type": {
             "options": {

homeassistant/components/nws/translations/sr-Latn.json

@@ -0,0 +1,9 @@
+{
+    "config": {
+        "step": {
+            "user": {
+                "title": "Pove\u017eite se sa Nacionalnom meteorolo\u0161kom slu\u017ebom"
+            }
+        }
+    }
+}

homeassistant/components/nws/translations/sr.json

@@ -0,0 +1,9 @@
+{
+    "config": {
+        "step": {
+            "user": {
+                "title": "\u041f\u043e\u0432\u0435\u0436\u0438\u0442\u0435 \u0441\u0435 \u0441\u0430 \u041d\u0430\u0446\u0438\u043e\u043d\u0430\u043b\u043d\u043e\u043c \u043c\u0435\u0442\u0435\u043e\u0440\u043e\u043b\u043e\u0448\u043a\u043e\u043c \u0441\u043b\u0443\u0436\u0431\u043e\u043c"
+            }
+        }
+    }
+}

homeassistant/components/nx584/translations/ga.json

@@ -1,9 +1,21 @@
 {
     "services": {
+        "bypass_zone": {
+            "description": "Seachna\u00edonn crios.",
+            "fields": {
+                "zone": {
+                    "description": "Uimhir an chrios at\u00e1 le seachaint.",
+                    "name": "Crios"
+                }
+            },
+            "name": "Crios seachbh\u00f3thair"
+        },
         "unbypass_zone": {
+            "description": "D\u00edsheachna\u00edonn s\u00e9 crios.",
             "fields": {
                 "zone": {
-                    "description": "Uimhir an chrios at\u00e1 le d\u00ed-seachbh\u00f3thar."
+                    "description": "Uimhir an chrios at\u00e1 le d\u00ed-seachbh\u00f3thar.",
+                    "name": "Crios"
                 }
             },
             "name": "Crios neamh-sheachbh\u00f3thair"

homeassistant/components/nzbget/translations/ga.json

@@ -1,4 +1,27 @@
 {
+    "config": {
+        "abort": {
+            "unknown": "Earr\u00e1id gan choinne"
+        },
+        "error": {
+            "cannot_connect": "Theip ar an nascadh"
+        },
+        "flow_title": "{name}",
+        "step": {
+            "user": {
+                "data": {
+                    "host": "\u00d3stach",
+                    "name": "Ainm",
+                    "password": "Pasfhocal",
+                    "port": "Port",
+                    "ssl": "\u00das\u00e1ideann teastas SSL",
+                    "username": "Ainm \u00fas\u00e1ideora",
+                    "verify_ssl": "F\u00edoraigh teastas SSL"
+                },
+                "title": "Ceangail le NZBGet"
+            }
+        }
+    },
     "entity": {
         "sensor": {
             "article_cache": {

homeassistant/components/nzbget/translations/lt.json

@@ -36,6 +36,12 @@
             "download_paused": {
                 "name": "Atsisiuntimas pristabdytas"
             },
+            "post_processing_jobs": {
+                "name": "Papildomo apdorojimo darbai"
+            },
+            "post_processing_paused": {
+                "name": "Papildomas apdorojimas pristabdytas"
+            },
             "queue_size": {
                 "name": "Eil\u0117s dydis"
             },

homeassistant/components/nzbget/translations/ru.json

@@ -36,6 +36,12 @@
             "download_paused": {
                 "name": "\u0417\u0430\u0433\u0440\u0443\u0437\u043a\u0430 \u043f\u0440\u0438\u043e\u0441\u0442\u0430\u043d\u043e\u0432\u043b\u0435\u043d\u0430"
             },
+            "post_processing_jobs": {
+                "name": "\u041f\u043e\u0441\u0442\u043e\u0431\u0440\u0430\u0431\u043e\u0442\u043a\u0430"
+            },
+            "post_processing_paused": {
+                "name": "\u041f\u043e\u0441\u0442\u043e\u0431\u0440\u0430\u0431\u043e\u0442\u043a\u0430 \u043f\u0440\u0438\u043e\u0441\u0442\u0430\u043d\u043e\u0432\u043b\u0435\u043d\u0430"
+            },
             "queue_size": {
                 "name": "\u0420\u0430\u0437\u043c\u0435\u0440 \u043e\u0447\u0435\u0440\u0435\u0434\u0438"
             },

homeassistant/components/obihai/translations/ga.json

@@ -1,12 +1,30 @@
 {
     "config": {
+        "abort": {
+            "already_configured": "T\u00e1 an gl\u00e9as cumraithe cheana f\u00e9in"
+        },
+        "error": {
+            "cannot_connect": "Theip ar an nascadh",
+            "invalid_auth": "F\u00edordheimhni\u00fa neamhbhail\u00ed"
+        },
         "step": {
             "dhcp_confirm": {
+                "data": {
+                    "host": "\u00d3stach",
+                    "password": "Pasfhocal",
+                    "username": "Ainm \u00fas\u00e1ideora"
+                },
                 "data_description": {
                     "host": "Ainm \u00f3stach n\u00f3 seoladh IP do ghl\u00e9is Obihai."
-                }
+                },
+                "description": "Ar mhaith leat {host} a chur ar bun?"
             },
             "user": {
+                "data": {
+                    "host": "\u00d3stach",
+                    "password": "Pasfhocal",
+                    "username": "Ainm \u00fas\u00e1ideora"
+                },
                 "data_description": {
                     "host": "Ainm \u00f3stach n\u00f3 seoladh IP do ghl\u00e9is Obihai."
                 }

homeassistant/components/octoprint/translations/ga.json

@@ -1,5 +1,8 @@
 {
     "config": {
+        "abort": {
+            "already_configured": "T\u00e1 an gl\u00e9as cumraithe cheana f\u00e9in"
+        },
         "step": {
             "user": {
                 "data_description": {

homeassistant/components/ollama/translations/lt.json

@@ -24,6 +24,11 @@
                 "entry_not_loaded": "Nepavyko prid\u0117ti agento. Konfig\u016bracija i\u0161jungta.",
                 "reconfigure_successful": "Pakartotinis konfig\u016bravimas buvo s\u0117kmingas"
             },
+            "entry_type": "AI u\u017eduotis",
+            "initiate_flow": {
+                "reconfigure": "Pertvarkyti AI u\u017eduot\u012f",
+                "user": "Prid\u0117ti AI u\u017eduot\u012f"
+            },
             "progress": {
                 "download": "Palaukite, kol modelis bus atsisi\u0173stas, tai gali u\u017etrukti labai ilgai. Daugiau informacijos rasite savo Ollama serverio \u017eurnaluose."
             },
@@ -89,5 +94,10 @@
                 }
             }
         }
+    },
+    "exceptions": {
+        "unsupported_attachment_type": {
+            "message": "Ollama palaiko tik vaizd\u0173 priedus naudotojo turinyje, bet gavo ne vaizd\u0173 priedus."
+        }
     }
 }

homeassistant/components/oncue/translations/ru.json

@@ -1 +1,8 @@
-{}
+{
+    "issues": {
+        "integration_removed": {
+            "description": "\u0418\u043d\u0442\u0435\u0433\u0440\u0430\u0446\u0438\u044f Oncue \u0431\u044b\u043b\u0430 \u0443\u0434\u0430\u043b\u0435\u043d\u0430 \u0438\u0437 Home Assistant.\n\n\u0421\u0435\u0440\u0432\u0438\u0441 Oncue \u0431\u044b\u043b \u043f\u0440\u0435\u043a\u0440\u0430\u0449\u0435\u043d, \u0438 [Rehlko]({rehlko}) \u2014 \u044d\u0442\u043e \u0438\u043d\u0442\u0435\u0433\u0440\u0430\u0446\u0438\u044f \u0434\u043b\u044f \u043f\u0440\u043e\u0434\u043e\u043b\u0436\u0435\u043d\u0438\u044f \u0435\u0433\u043e \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u043e\u0432\u0430\u043d\u0438\u044f.\n\n\u0414\u043b\u044f \u0440\u0435\u0448\u0435\u043d\u0438\u044f \u044d\u0442\u043e\u0439 \u043f\u0440\u043e\u0431\u043b\u0435\u043c\u044b, \u043f\u043e\u0436\u0430\u043b\u0443\u0439\u0441\u0442\u0430, \u0443\u0434\u0430\u043b\u0438\u0442\u0435 \u0437\u0430\u043f\u0438\u0441\u0438 (\u0442\u0435\u043f\u0435\u0440\u044c \u043d\u0435\u0440\u0430\u0431\u043e\u0442\u0430\u044e\u0449\u0435\u0439) \u0438\u043d\u0442\u0435\u0433\u0440\u0430\u0446\u0438\u0438 \u0438\u0437 Home Assistant. [\u041d\u0430\u0436\u043c\u0438\u0442\u0435 \u0437\u0434\u0435\u0441\u044c, \u0447\u0442\u043e\u0431\u044b \u0443\u0432\u0438\u0434\u0435\u0442\u044c \u0432\u0430\u0448\u0438 \u0441\u0443\u0449\u0435\u0441\u0442\u0432\u0443\u044e\u0449\u0438\u0435 \u0437\u0430\u043f\u0438\u0441\u0438 \u0438\u043d\u0442\u0435\u0433\u0440\u0430\u0446\u0438\u0438 Oncue]({entries}).",
+            "title": "\u0418\u043d\u0442\u0435\u0433\u0440\u0430\u0446\u0438\u044f Oncue \u0431\u044b\u043b\u0430 \u0443\u0434\u0430\u043b\u0435\u043d\u0430"
+        }
+    }
+}

homeassistant/components/ondilo_ico/translations/ga.json

@@ -1,11 +1,16 @@
 {
     "config": {
         "abort": {
+            "authorize_url_timeout": "Am cr\u00edochnaithe ag gini\u00faint URL \u00fadaraithe.",
+            "missing_configuration": "N\u00edl an chomhph\u00e1irt cumraithe. Lean an doicim\u00e9ad\u00fa le do thoil.",
             "oauth_error": "Fuarthas sonra\u00ed comhartha neamhbhail\u00ed.",
             "oauth_failed": "Earr\u00e1id agus comhartha rochtana \u00e1 fh\u00e1il.",
             "oauth_timeout": "Am cr\u00edochnaithe ag r\u00e9iteach comhartha OAuth.",
             "oauth_unauthorized": "Earr\u00e1id \u00fadaraithe OAuth agus comhartha rochtana \u00e1 fh\u00e1il."
         },
+        "create_entry": {
+            "default": "F\u00edordheimhnithe go rath\u00fail"
+        },
         "step": {
             "pick_implementation": {
                 "data": {
@@ -13,7 +18,8 @@
                 },
                 "data_description": {
                     "implementation": "Na dinti\u00fair is mian leat a \u00fas\u00e1id chun f\u00edordheimhni\u00fa."
-                }
+                },
+                "title": "Roghnaigh modh f\u00edordheimhnithe"
             }
         }
     },

homeassistant/components/onewire/translations/ga.json

@@ -1,8 +1,12 @@
 {
     "config": {
         "abort": {
+            "already_configured": "T\u00e1 an gl\u00e9as cumraithe cheana f\u00e9in",
             "reconfigure_successful": "D'\u00e9irigh leis an athchumr\u00fa"
         },
+        "error": {
+            "cannot_connect": "Theip ar an nascadh"
+        },
         "step": {
             "discovery_confirm": {
                 "description": "Ar mhaith leat OWServer a chur ar bun \u00f3 {host}?"
@@ -19,10 +23,15 @@
                 "description": "Nuashonraigh cumra\u00edocht OWServer do {name}"
             },
             "user": {
+                "data": {
+                    "host": "\u00d3stach",
+                    "port": "Port"
+                },
                 "data_description": {
                     "host": "Ainm \u00f3stach n\u00f3 seoladh IP d\u2019eisp\u00e9ireas OWServer.",
                     "port": "Port d'eisp\u00e9ireas OWServer (is \u00e9 4304 an r\u00e9amhshocr\u00fa)."
-                }
+                },
+                "title": "Socraigh sonra\u00ed sampla OWServer"
             }
         }
     },
@@ -53,15 +62,39 @@
             "counter_id": {
                 "name": "\u00c1iritheoir {id}"
             },
+            "humidity_hih3600": {
+                "name": "Taise HIH3600"
+            },
+            "humidity_hih4000": {
+                "name": "Taise HIH4000"
+            },
+            "humidity_raw": {
+                "name": "Taise amh"
+            },
             "latest_voltage_id": {
                 "name": "Voltas is d\u00e9ana\u00ed {id}"
             },
             "moisture_id": {
                 "name": "Taise {id}"
             },
+            "thermocouple_temperature_k": {
+                "name": "Teocht teirmeach\u00fapla K"
+            },
             "voltage_id": {
                 "name": "Voltas {id}"
             },
+            "voltage_vad": {
+                "name": "Voltas VAD"
+            },
+            "voltage_vdd": {
+                "name": "Voltas VDD"
+            },
+            "voltage_vis": {
+                "name": "Difr\u00edocht voltais VIS"
+            },
+            "voltage_vis_gradient": {
+                "name": "Gr\u00e1d\u00e1n voltais VIS"
+            },
             "wetness_id": {
                 "name": "Fliuchas {id}"
             }
@@ -70,6 +103,9 @@
             "hub_branch_id": {
                 "name": "Brainse mol {id}"
             },
+            "iad": {
+                "name": "Rial\u00fa A/D reatha"
+            },
             "latch_id": {
                 "name": "Laiste {id}"
             },
@@ -79,6 +115,9 @@
             "moisture_sensor_id": {
                 "name": "Braiteoir taise {id}"
             },
+            "pio": {
+                "name": "Ionchur-aschur cl\u00e1raithe"
+            },
             "pio_id": {
                 "name": "Ionchur-aschur cl\u00e1raithe {id}"
             }
@@ -87,6 +126,23 @@
     "options": {
         "abort": {
             "no_configurable_devices": "N\u00edor aims\u00edodh aon fheist\u00ed inchumraithe"
+        },
+        "error": {
+            "device_not_selected": "Roghnaigh gl\u00e9asanna le cumr\u00fa"
+        },
+        "step": {
+            "configure_device": {
+                "data": {
+                    "precision": "Cruinneas braiteora"
+                },
+                "description": "Roghnaigh cruinneas braiteora do {sensor_id}",
+                "title": "Beachtas braiteora 1-sreang"
+            },
+            "device_selection": {
+                "data": {
+                    "clear_device_options": "Glan cumra\u00edocht uile an ghl\u00e9is"
+                }
+            }
         }
     }
 }

homeassistant/components/onkyo/config_flow.py

@@ -168,7 +168,7 @@ class OnkyoConfigFlow(ConfigFlow, domain=DOMAIN):
 
         self._discovered_infos = {}
         discovered_names = {}
-        current_unique_ids = self._async_current_ids()
+        current_unique_ids = self._async_current_ids(include_ignore=False)
         for info in infos:
             if info.identifier in current_unique_ids:
                 continue

homeassistant/components/onvif/translations/ga.json

@@ -21,14 +21,55 @@
             }
         }
     },
+    "options": {
+        "step": {
+            "onvif_devices": {
+                "data": {
+                    "rtsp_transport": "S\u00e1sra iompair RTSP",
+                    "use_wallclock_as_timestamps": "\u00das\u00e1id clog balla mar stampa\u00ed ama"
+                },
+                "title": "Roghanna gl\u00e9as ONVIF"
+            }
+        }
+    },
     "services": {
         "ptz": {
             "description": "M\u00e1 thaca\u00edonn do cheamara ONVIF le PTZ, beidh t\u00fa in ann do cheamara a ph\u00e1n\u00e1il, a chlaonadh n\u00f3 z\u00fam\u00e1il isteach.",
             "fields": {
+                "continuous_duration": {
+                    "description": "Socraigh moill ContinuousMove i soicind\u00ed sula stopann an bogadh.",
+                    "name": "Fad lean\u00fanach"
+                },
+                "distance": {
+                    "description": "Comh\u00e9ifeacht achair. Socra\u00edonn s\u00e9 c\u00e9 mh\u00e9ad PTZ ba ch\u00f3ir a fhorghn\u00edomh\u00fa in aon iarratas amh\u00e1in.",
+                    "name": "Fad"
+                },
+                "move_mode": {
+                    "description": "M\u00f3d gluaiseachta PTZ.",
+                    "name": "M\u00f3d Bogtha"
+                },
+                "pan": {
+                    "description": "Treo pan\u00e1la.",
+                    "name": "Pan"
+                },
+                "preset": {
+                    "description": "Comhartha pr\u00f3if\u00edle r\u00e9amhshocraithe PTZ. Socra\u00edonn s\u00e9 an comhartha pr\u00f3if\u00edle r\u00e9amhshocraithe a fhorghn\u00edomha\u00edtear le GotoPreset.",
+                    "name": "R\u00e9amhshocr\u00fa"
+                },
                 "speed": {
+                    "description": "Comh\u00e9ifeacht luais. Socra\u00edonn s\u00e9 c\u00e9 chomh tapa agus a fhorghn\u00edomh\u00f3far PTZ.",
                     "name": "Luas"
+                },
+                "tilt": {
+                    "description": "Treo claonta.",
+                    "name": "Claonadh"
+                },
+                "zoom": {
+                    "description": "Z\u00fam\u00e1il.",
+                    "name": "Z\u00fam\u00e1il"
                 }
-            }
+            },
+            "name": "PTZ"
         }
     }
 }

homeassistant/components/open_meteo/translations/ga.json

@@ -0,0 +1,15 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "T\u00e1 an tseirbh\u00eds cumraithe cheana f\u00e9in"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "zone": "Crios"
+                },
+                "description": "Roghnaigh su\u00edomh le h\u00fas\u00e1id le haghaidh r\u00e9amhaisn\u00e9is na haimsire"
+            }
+        }
+    }
+}

homeassistant/components/open_router/translations/lt.json

@@ -48,7 +48,13 @@
             "step": {
                 "user": {
                     "data": {
-                        "model": "Modelis"
+                        "llm_hass_api": "Valdykite \u201eHome Assistant\u201c",
+                        "model": "Modelis",
+                        "prompt": "Instrukcijos"
+                    },
+                    "data_description": {
+                        "model": "Pokalbi\u0173 agentui naudotinas modelis",
+                        "prompt": "Nurodykite, kaip LLM tur\u0117t\u0173 reaguoti. Tai gali b\u016bti \u0161ablonas."
                     },
                     "description": "Naujo pokalbi\u0173 agento konfig\u016bravimas"
                 }

homeassistant/components/openai_conversation/translations/ga.json

@@ -2,6 +2,18 @@
     "config": {
         "abort": {
             "already_configured": "T\u00e1 an tseirbh\u00eds cumraithe cheana f\u00e9in"
+        },
+        "error": {
+            "cannot_connect": "Theip ar an nascadh",
+            "invalid_auth": "F\u00edordheimhni\u00fa neamhbhail\u00ed",
+            "unknown": "Earr\u00e1id gan choinne"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "api_key": "Eochair API"
+                }
+            }
         }
     },
     "config_subentries": {

homeassistant/components/openai_conversation/translations/lt.json

@@ -22,9 +22,14 @@
                 "entry_not_loaded": "Negalima prid\u0117ti dalyk\u0173, kol konfig\u016bracija i\u0161jungta.",
                 "reconfigure_successful": "Pakartotinis konfig\u016bravimas buvo s\u0117kmingas"
             },
+            "entry_type": "AI u\u017eduotis",
             "error": {
                 "model_not_supported": "\u0160is modelis nepalaikomas, pasirinkite kit\u0105 model\u012f"
             },
+            "initiate_flow": {
+                "reconfigure": "I\u0161 naujo konfig\u016bruoti DI u\u017eduot\u012f",
+                "user": "Prid\u0117ti dirbtinio intelekto u\u017eduot\u012f"
+            },
             "step": {
                 "advanced": {
                     "data": {