homeassistant 2025.9.0b0__py3-none-any.whl → 2025.9.0b2__py3-none-any.whl

homeassistant/components/template/translations/sv.json

@@ -17,6 +17,7 @@
                 "data": {
                     "code_arm_required": "Kod kr\u00e4vs f\u00f6r p\u00e5larmning",
                     "device_id": "Enhet",
+                    "disarm": "\u00c5tg\u00e4rd vid avlarmning",
                     "name": "Namn"
                 },
                 "sections": {
@@ -37,6 +38,9 @@
                     "device_id": "Enhet",
                     "name": "Namn"
                 },
+                "data_description": {
+                    "state": "Sensorn \u00e4r `p\u00e5` om mallen utv\u00e4rderas till `True`, `yes`, `on`, `enable` eller ett positivt tal. Alla andra v\u00e4rden g\u00f6r att den blir `av`."
+                },
                 "sections": {
                     "advanced_options": {
                         "data": {
@@ -74,11 +78,15 @@
             },
             "cover": {
                 "data": {
+                    "close_cover": "\u00c5tg\u00e4rder vid st\u00e4ngning",
                     "device_class": "Enhetsklass",
                     "device_id": "Enhet",
                     "name": "Namn",
+                    "open_cover": "\u00c5tg\u00e4rder vid \u00f6ppning",
                     "position": "Position",
-                    "state": "Tillst\u00e5nd"
+                    "set_cover_position": "\u00c5tg\u00e4rder n\u00e4r position s\u00e4tts",
+                    "state": "Tillst\u00e5nd",
+                    "stop_cover": "\u00c5tg\u00e4rder vid stopp"
                 },
                 "data_description": {
                     "device_id": "V\u00e4lj en enhet att l\u00e4nka till den h\u00e4r entiteten."
@@ -93,7 +101,11 @@
                         },
                         "name": "Avancerade alternativ"
                     }
-                }
+                },
+                "title": "Mall f\u00f6r ett skydd"
+            },
+            "event": {
+                "title": "Mall f\u00f6r en h\u00e4ndelse"
             },
             "fan": {
                 "data": {
@@ -284,15 +296,18 @@
                     "alarm_control_panel": "Skapa mall f\u00f6r en larmkontrollpanel",
                     "binary_sensor": "Skapa mall f\u00f6r en bin\u00e4r sensor",
                     "button": "Skapa mall f\u00f6r en knapp",
-                    "fan": "Malla en fl\u00e4kt",
+                    "cover": "Skapa mall f\u00f6r ett skydd",
+                    "event": "Skapa mall f\u00f6r en h\u00e4ndelse",
+                    "fan": "Skapa mall f\u00f6r en fl\u00e4kt",
                     "image": "Skapa mall f\u00f6r en bild",
-                    "light": "Malla en lampa",
-                    "lock": "Malla ett l\u00e5s",
+                    "light": "Skapa mall f\u00f6r en lampa",
+                    "lock": "Skapa mall f\u00f6r ett l\u00e5s",
                     "number": "Skapa mall f\u00f6r ett nummer",
                     "select": "Skapa mall f\u00f6r ett val",
                     "sensor": "Skapa mall f\u00f6r en sensor",
                     "switch": "Skapa mall f\u00f6r en brytare",
-                    "vacuum": "Malla dammsugare"
+                    "update": "Skapa mall f\u00f6r uppdaterare",
+                    "vacuum": "Skapa mall f\u00f6r dammsugare"
                 },
                 "title": "Mall-hj\u00e4lpare"
             },
@@ -371,6 +386,9 @@
                 "data": {
                     "device_id": "Enhet"
                 },
+                "data_description": {
+                    "state": "Sensorn \u00e4r `p\u00e5` om mallen utv\u00e4rderas till `True`, `yes`, `on`, `enable` eller ett positivt tal. Alla andra v\u00e4rden g\u00f6r att den blir `av`."
+                },
                 "sections": {
                     "advanced_options": {
                         "data": {
@@ -407,9 +425,13 @@
             },
             "cover": {
                 "data": {
+                    "close_cover": "\u00c5tg\u00e4rder vid st\u00e4ngning",
                     "device_id": "Enhet",
+                    "open_cover": "\u00c5tg\u00e4rder vid \u00f6ppning",
                     "position": "Position",
-                    "state": "Tillst\u00e5nd"
+                    "set_cover_position": "\u00c5tg\u00e4rder n\u00e4r position s\u00e4tts",
+                    "state": "Tillst\u00e5nd",
+                    "stop_cover": "\u00c5tg\u00e4rder vid stopp"
                 },
                 "data_description": {
                     "device_id": "V\u00e4lj en enhet att l\u00e4nka till den h\u00e4r entiteten."
@@ -424,7 +446,8 @@
                         },
                         "name": "Avancerade alternativ"
                     }
-                }
+                },
+                "title": "Mall f\u00f6r ett skydd"
             },
             "fan": {
                 "data": {

homeassistant/components/tesla_fleet/__init__.py

@@ -179,7 +179,6 @@ async def async_setup_entry(hass: HomeAssistant, entry: TeslaFleetConfigEntry) -
             )
 
             await live_coordinator.async_config_entry_first_refresh()
-            await history_coordinator.async_config_entry_first_refresh()
             await info_coordinator.async_config_entry_first_refresh()
 
             # Create energy site model

homeassistant/components/teslemetry/translations/lt.json

@@ -184,6 +184,9 @@
             "remote_start_enabled": {
                 "name": "Nuotolinis paleidimas"
             },
+            "right_hand_drive": {
+                "name": "Vairas de\u0161in\u0117je"
+            },
             "seat_vent_enabled": {
                 "name": "\u012ejungta s\u0117dyn\u0117s ventiliacija"
             },
@@ -1294,6 +1297,7 @@
                     "name": "I\u0161vykimo laikas"
                 },
                 "device_id": {
+                    "description": "Transporto priemon\u0117s grafikas.",
                     "name": "Transporto priemon\u0117"
                 },
                 "enable": {

homeassistant/components/teslemetry/translations/mk.json

@@ -168,6 +168,11 @@
                     "retry": "\u041e\u0431\u0438\u0434\u0435\u0442\u0435 \u0441\u0435 \u043f\u043e\u0432\u0442\u043e\u0440\u043d\u043e"
                 }
             },
+            "powershare_type": {
+                "state": {
+                    "home": "\u0414\u043e\u043c\u0430"
+                }
+            },
             "scheduled_charging_mode": {
                 "state": {
                     "departure": "\u0417\u0430\u043c\u0438\u043d\u0443\u0432\u0430\u045a\u0435"

homeassistant/components/togrill/translations/fr.json

@@ -25,6 +25,7 @@
     "entity": {
         "event": {
             "event": {
+                "name": "\u00c9v\u00e9nement",
                 "state_attributes": {
                     "event_type": {
                         "state": {
@@ -47,6 +48,9 @@
         "number": {
             "alarm_interval": {
                 "name": "Intervalle de l'alarme"
+            },
+            "temperature_target": {
+                "name": "Temp\u00e9rature cible"
             }
         }
     },

homeassistant/components/togrill/translations/lt.json

@@ -21,5 +21,54 @@
                 "description": "Pasirinkite prietais\u0105, kur\u012f norite nustatyti"
             }
         }
+    },
+    "device": {
+        "probe": {
+            "name": "Zondas {probe_number}"
+        }
+    },
+    "entity": {
+        "event": {
+            "event": {
+                "name": "\u012evykis",
+                "state_attributes": {
+                    "event_type": {
+                        "state": {
+                            "ambient_cool_down": "Atv\u0117simas aplinkos temperat\u016broje",
+                            "ambient_low_temp": "Aplinkos temperat\u016bra per \u017eema",
+                            "ambient_over_heat": "Per auk\u0161ta aplinkos temperat\u016bra",
+                            "device_high_temp": "\u012erenginys per auk\u0161tai \u012fkaito",
+                            "device_low_power": "\u012erenginio akumuliatoriaus \u012ftampa ma\u017ea",
+                            "ignition_failure": "U\u017evedimo gedimas",
+                            "probe_above_maximum": "Per auk\u0161ta temperat\u016bra",
+                            "probe_acknowledge": "Signalizacija patvirtinta",
+                            "probe_alarm": "Suveik\u0117 signalizacija",
+                            "probe_below_minimum": "Per \u017eema temperat\u016bra",
+                            "probe_disconnected": "Zondas atjungtas",
+                            "probe_timer_alarm": "Laikma\u010dio \u017eadintuvas"
+                        }
+                    }
+                }
+            }
+        },
+        "number": {
+            "alarm_interval": {
+                "name": "Signalo intervalas"
+            },
+            "temperature_target": {
+                "name": "Tikslin\u0117 temperat\u016bra"
+            }
+        }
+    },
+    "exceptions": {
+        "communication_failed": {
+            "message": "Ry\u0161ys su \u012frenginiu nepavyko"
+        },
+        "disconnected": {
+            "message": "\u012erenginys atjungtas"
+        },
+        "rejected": {
+            "message": "\u012erenginys atmet\u0117 duomenis"
+        }
     }
 }

homeassistant/components/togrill/translations/pt.json

@@ -21,5 +21,54 @@
                 "description": "Escolher um dispositivo para configurar"
             }
         }
+    },
+    "device": {
+        "probe": {
+            "name": "Sonda {probe_number}"
+        }
+    },
+    "entity": {
+        "event": {
+            "event": {
+                "name": "Evento",
+                "state_attributes": {
+                    "event_type": {
+                        "state": {
+                            "ambient_cool_down": "Arrefecimento da temperatura ambiente",
+                            "ambient_low_temp": "Temperatura ambiente demasiado baixa",
+                            "ambient_over_heat": "Temperatura ambiente demasiado alta",
+                            "device_high_temp": "O dispositivo tem uma temperatura demasiado alta",
+                            "device_low_power": "O dispositivo tem a bateria fraca",
+                            "ignition_failure": "Falha de igni\u00e7\u00e3o",
+                            "probe_above_maximum": "Temperatura demasiado alta",
+                            "probe_acknowledge": "Alarme confirmado",
+                            "probe_alarm": "Alarme acionado",
+                            "probe_below_minimum": "Temperatura demasiado baixa",
+                            "probe_disconnected": "Sonda desligada",
+                            "probe_timer_alarm": "Alarme temporizador"
+                        }
+                    }
+                }
+            }
+        },
+        "number": {
+            "alarm_interval": {
+                "name": "Intervalo de alarme"
+            },
+            "temperature_target": {
+                "name": "Temperatura alvo"
+            }
+        }
+    },
+    "exceptions": {
+        "communication_failed": {
+            "message": "Falha na comunica\u00e7\u00e3o com o dispositivo"
+        },
+        "disconnected": {
+            "message": "O dispositivo est\u00e1 desligado"
+        },
+        "rejected": {
+            "message": "Os dados foram rejeitados pelo dispositivo"
+        }
     }
 }

homeassistant/components/tomorrowio/translations/lt.json

@@ -154,7 +154,11 @@
     "options": {
         "step": {
             "init": {
-                "description": "Jei pasirinksite \u012fgalinti \u201enowcast\u201c prognoz\u0117s subjekt\u0105, galite konfig\u016bruoti minu\u010di\u0173 skai\u010di\u0173 tarp kiekvienos prognoz\u0117s. Pateikt\u0173 prognozi\u0173 skai\u010dius priklauso nuo pasirinkt\u0173 minu\u010di\u0173 tarp prognozi\u0173 skai\u010diaus."
+                "data": {
+                    "timestep": "Minut\u0117s tarp NowCast prognozi\u0173"
+                },
+                "description": "Jei pasirinksite \u012fgalinti \u201enowcast\u201c prognoz\u0117s subjekt\u0105, galite konfig\u016bruoti minu\u010di\u0173 skai\u010di\u0173 tarp kiekvienos prognoz\u0117s. Pateikt\u0173 prognozi\u0173 skai\u010dius priklauso nuo pasirinkt\u0173 minu\u010di\u0173 tarp prognozi\u0173 skai\u010diaus.",
+                "title": "Atnaujinti Tomorrow.io parinktis"
             }
         }
     }

homeassistant/components/tplink/translations/lt.json

@@ -37,7 +37,7 @@
                 },
                 "data_description": {
                     "password": "J\u016bs\u0173 TP-Link debesies slapta\u017eodis, kuriame skiriamos did\u017eiosios ir ma\u017eosios raid\u0117s.",
-                    "username": "J\u016bs\u0173 TP-Link debesies naudotojo vardas, kuris yra visas el. pa\u0161to adresas ir kuriame skiriamos did\u017eiosios ir ma\u017eosios raid\u0117s."
+                    "username": "J\u016bs\u0173 \u201eTP-Link\u201c debesies vartotojo vardas, kuris yra visas el. pa\u0161to adresas ir kuriame skiriamos did\u017eiosios ir ma\u017eosios raid\u0117s."
                 },
                 "description": "Prietaisui reikalingas autentifikavimas. Toliau \u012fveskite savo TP-Link kredencialus. Atkreipkite d\u0117mes\u012f jog ir el. pa\u0161tas, ir slapta\u017eodis yra jautr\u016bs did\u017eiosioms bei ma\u017eosioms raid\u0117ms.",
                 "title": "Autentifikuoti"
@@ -60,7 +60,7 @@
                 },
                 "data_description": {
                     "password": "J\u016bs\u0173 TP-Link debesies slapta\u017eodis, kuriame skiriamos did\u017eiosios ir ma\u017eosios raid\u0117s.",
-                    "username": "J\u016bs\u0173 TP-Link debesies naudotojo vardas, kuris yra visas el. pa\u0161to adresas ir kuriame skiriamos did\u017eiosios ir ma\u017eosios raid\u0117s."
+                    "username": "J\u016bs\u0173 \u201eTP-Link\u201c debesies vartotojo vardas, kuris yra visas el. pa\u0161to adresas ir kuriame skiriamos did\u017eiosios ir ma\u017eosios raid\u0117s."
                 },
                 "description": "Prietaisui reikalingas autentifikavimas. Toliau \u012fveskite savo TP-Link kredencialus. Atkreipkite d\u0117mes\u012f jog ir el. pa\u0161tas, ir slapta\u017eodis yra jautr\u016bs did\u017eiosioms bei ma\u017eosioms raid\u0117ms.",
                 "title": "Baig\u0117si {name} autentifikavimo galiojimas"
@@ -89,6 +89,10 @@
                     "password": "Slapta\u017eodis",
                     "username": "Naudotojo vardas"
                 },
+                "data_description": {
+                    "password": "J\u016bs\u0173 TP-Link debesies slapta\u017eodis, kuriame skiriamos did\u017eiosios ir ma\u017eosios raid\u0117s.",
+                    "username": "J\u016bs\u0173 \u201eTP-Link\u201c debesies vartotojo vardas, kuris yra visas el. pa\u0161to adresas ir kuriame skiriamos did\u017eiosios ir ma\u017eosios raid\u0117s."
+                },
                 "description": "Prietaisui reikalingas autentifikavimas. Toliau \u012fveskite savo TP-Link kredencialus. Atkreipkite d\u0117mes\u012f jog ir el. pa\u0161tas, ir slapta\u017eodis yra jautr\u016bs did\u017eiosioms bei ma\u017eosioms raid\u0117ms.",
                 "title": "Autentifikuoti"
             }

homeassistant/components/trafikverket_weatherstation/translations/sr-Latn.json

@@ -0,0 +1,29 @@
+{
+    "entity": {
+        "sensor": {
+            "air_temperature": {
+                "name": "Temperatura vazduha"
+            },
+            "measure_time": {
+                "name": "Merenje vremena"
+            },
+            "precipitation": {
+                "name": "Vrsta padavina",
+                "state": {
+                    "freezing_rain": "Ledena ki\u0161a",
+                    "rain": "Ki\u0161a",
+                    "snow": "Sneg"
+                }
+            },
+            "road_temperature": {
+                "name": "Temperatura puta"
+            },
+            "wind_direction": {
+                "name": "Pravac vetra"
+            },
+            "wind_speed_max": {
+                "name": "Maksimalna brzina vetra"
+            }
+        }
+    }
+}

homeassistant/components/trafikverket_weatherstation/translations/sr.json

@@ -0,0 +1,29 @@
+{
+    "entity": {
+        "sensor": {
+            "air_temperature": {
+                "name": "\u0422\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u0430 \u0432\u0430\u0437\u0434\u0443\u0445\u0430"
+            },
+            "measure_time": {
+                "name": "\u041c\u0435\u0440\u0435\u045a\u0435 \u0432\u0440\u0435\u043c\u0435\u043d\u0430"
+            },
+            "precipitation": {
+                "name": "\u0412\u0440\u0441\u0442\u0430 \u043f\u0430\u0434\u0430\u0432\u0438\u043d\u0430",
+                "state": {
+                    "freezing_rain": "\u041b\u0435\u0434\u0435\u043d\u0430 \u043a\u0438\u0448\u0430",
+                    "rain": "\u041a\u0438\u0448\u0430",
+                    "snow": "\u0421\u043d\u0435\u0433"
+                }
+            },
+            "road_temperature": {
+                "name": "\u0422\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u0430 \u043f\u0443\u0442\u0430"
+            },
+            "wind_direction": {
+                "name": "\u041f\u0440\u0430\u0432\u0430\u0446 \u0432\u0435\u0442\u0440\u0430"
+            },
+            "wind_speed_max": {
+                "name": "\u041c\u0430\u043a\u0441\u0438\u043c\u0430\u043b\u043d\u0430 \u0431\u0440\u0437\u0438\u043d\u0430 \u0432\u0435\u0442\u0440\u0430"
+            }
+        }
+    }
+}

homeassistant/components/triggercmd/__init__.py

@@ -8,6 +8,7 @@ from homeassistant.config_entries import ConfigEntry
 from homeassistant.const import Platform
 from homeassistant.core import HomeAssistant
 from homeassistant.exceptions import ConfigEntryNotReady
+from homeassistant.helpers import httpx_client
 
 from .const import CONF_TOKEN
 
@@ -20,9 +21,12 @@ type TriggercmdConfigEntry = ConfigEntry[ha.Hub]
 
 async def async_setup_entry(hass: HomeAssistant, entry: TriggercmdConfigEntry) -> bool:
     """Set up TRIGGERcmd from a config entry."""
+    hass_client = httpx_client.get_async_client(hass)
     hub = ha.Hub(entry.data[CONF_TOKEN])
-
-    status_code = await client.async_connection_test(entry.data[CONF_TOKEN])
+    await hub.async_init(hass_client)
+    status_code = await client.async_connection_test(
+        entry.data[CONF_TOKEN], hass_client
+    )
     if status_code != 200:
         raise ConfigEntryNotReady
 

homeassistant/components/triggercmd/config_flow.py

@@ -12,6 +12,7 @@ import voluptuous as vol
 from homeassistant.config_entries import ConfigFlow, ConfigFlowResult
 from homeassistant.core import HomeAssistant
 from homeassistant.exceptions import HomeAssistantError
+from homeassistant.helpers import httpx_client
 
 from .const import CONF_TOKEN, DOMAIN
 
@@ -32,8 +33,9 @@ async def validate_input(hass: HomeAssistant, data: dict) -> str:
     if not token_data["id"]:
         raise InvalidToken
 
+    hass_client = httpx_client.get_async_client(hass)
     try:
-        await client.async_connection_test(data[CONF_TOKEN])
+        await client.async_connection_test(data[CONF_TOKEN], hass_client)
     except Exception as e:
         raise TRIGGERcmdConnectionError from e
     else:

homeassistant/components/triggercmd/manifest.json

@@ -6,5 +6,5 @@
   "documentation": "https://www.home-assistant.io/integrations/triggercmd",
   "integration_type": "hub",
   "iot_class": "cloud_polling",
-  "requirements": ["triggercmd==0.0.27"]
+  "requirements": ["triggercmd==0.0.36"]
 }

homeassistant/components/triggercmd/switch.py

@@ -82,5 +82,6 @@ class TRIGGERcmdSwitch(SwitchEntity):
                 "params": params,
                 "sender": "Home Assistant",
             },
+            self._switch.hub.httpx_client,
         )
         _LOGGER.debug("TRIGGERcmd trigger response: %s", r.json())

homeassistant/components/tts/translations/cs.json

@@ -42,7 +42,7 @@
                     "name": "Jazyk"
                 },
                 "media_player_entity_id": {
-                    "description": "P\u0159ehr\u00e1va\u010de m\u00e9di\u00ed pro p\u0159ehr\u00e1n\u00ed zpr\u00e1vy.",
+                    "description": "P\u0159ehr\u00e1va\u010de m\u00e9di\u00ed pro p\u0159ehr\u00e1v\u00e1n\u00ed zpr\u00e1vy.",
                     "name": "Entita p\u0159ehr\u00e1va\u010de m\u00e9di\u00ed"
                 },
                 "message": {

homeassistant/components/tuya/translations/ga.json

@@ -209,6 +209,9 @@
             "temp_correction": {
                 "name": "Ceart\u00fa teochta"
             },
+            "temperature": {
+                "name": "Teocht"
+            },
             "temperature_after_boiling": {
                 "name": "Teocht tar \u00e9is fiuchta"
             },
@@ -282,6 +285,11 @@
             "humidifier_moodlighting": {
                 "name": "Soilsi\u00fa gi\u00famar"
             },
+            "humidifier_spray_mode": {
+                "state": {
+                    "health": "Sl\u00e1inte"
+                }
+            },
             "indexed_led_type": {
                 "name": "Cine\u00e1l foinse solais {index}"
             },

homeassistant/components/tuya/translations/lt.json

@@ -250,6 +250,7 @@
             },
             "blanket_level": {
                 "state": {
+                    "level_10": "Auk\u0161tas",
                     "level_2": "2 lygis",
                     "level_3": "3 lygis",
                     "level_4": "4 lygis",

homeassistant/components/tuya/translations/pl.json

@@ -11,7 +11,7 @@
     "entity": {
         "cover": {
             "blind": {
-                "name": "\u017baluzje"
+                "name": "\u017baluzja"
             },
             "curtain": {
                 "name": "Zas\u0142ona"

homeassistant/components/tuya/translations/select.ga.json

@@ -1,6 +1,10 @@
 {
     "state": {
+        "tuya__humidifier_spray_mode": {
+            "health": "Sl\u00e1inte"
+        },
         "tuya__vacuum_cistern": {
+            "closed": "D\u00fanta",
             "high": "Ard",
             "low": "\u00cdseal"
         }

homeassistant/components/unifiprotect/translations/ga.json

@@ -233,6 +233,11 @@
                 }
             }
         },
+        "media_player": {
+            "speaker": {
+                "name": "Cainteoir"
+            }
+        },
         "number": {
             "auto_lock_timeout": {
                 "name": "Am scoir uathoibr\u00edoch-ghlas\u00e1la"
@@ -388,6 +393,9 @@
             "storage_utilization": {
                 "name": "\u00das\u00e1id st\u00f3r\u00e1la"
             },
+            "temperature": {
+                "name": "Teocht"
+            },
             "transferred_data": {
                 "name": "Sonra\u00ed aistrithe"
             },

homeassistant/components/unifiprotect/translations/lt.json

@@ -8,15 +8,20 @@
         "error": {
             "cannot_connect": "Nepavyko prisijungti",
             "cloud_user": "Ubiquiti Cloud naudotojai nepalaikomi. Vietoj to naudokite vietin\u012f naudotoj\u0105.",
-            "invalid_auth": "Neteisingas autentifikavimas"
+            "invalid_auth": "Neteisingas autentifikavimas",
+            "protect_version": "Minimali reikalinga versija yra v6.0.0. Atnaujinkite UniFi Protect ir bandykite dar kart\u0105."
         },
         "flow_title": "{name} ({ip_address})",
         "step": {
             "discovery_confirm": {
                 "data": {
+                    "api_key": "API raktas",
                     "password": "Slapta\u017eodis",
                     "username": "Naudotojo vardas"
                 },
+                "data_description": {
+                    "api_key": "J\u016bs\u0173 vietin\u0117s vartotojo paskyros API raktas."
+                },
                 "description": "Ar norite nustatyti {name} ( {ip_address} )? Jums reik\u0117s vietinio vartotojo, sukurto UniFi OS konsol\u0117je, kad gal\u0117tum\u0117te prisijungti. Ubiquiti Cloud naudotojai neveiks. Daugiau informacijos: {local_user_documentation_url}",
                 "title": "Aptiktas UniFi Protect."
             },

homeassistant/components/vallox/translations/lt.json

@@ -32,6 +32,11 @@
         }
     },
     "entity": {
+        "binary_sensor": {
+            "post_heater": {
+                "name": "Papildomas \u0161ildytuvas"
+            }
+        },
         "date": {
             "filter_change_date": {
                 "name": "Filtro keitimo data"

homeassistant/components/velux/translations/cs.json

@@ -22,6 +22,13 @@
             }
         }
     },
+    "entity": {
+        "binary_sensor": {
+            "rain_sensor": {
+                "name": "De\u0161\u0165ov\u00fd senzor"
+            }
+        }
+    },
     "services": {
         "reboot_gateway": {
             "description": "Restartuje br\u00e1nu KLF200.",

homeassistant/components/velux/translations/lt.json

@@ -22,6 +22,13 @@
             }
         }
     },
+    "entity": {
+        "binary_sensor": {
+            "rain_sensor": {
+                "name": "Lietaus jutiklis"
+            }
+        }
+    },
     "services": {
         "reboot_gateway": {
             "description": "Perkrauna KLF200 prieigos vartus.",

homeassistant/components/velux/translations/nl.json

@@ -22,6 +22,13 @@
             }
         }
     },
+    "entity": {
+        "binary_sensor": {
+            "rain_sensor": {
+                "name": "Regensensor"
+            }
+        }
+    },
     "services": {
         "reboot_gateway": {
             "description": "Herstart de KLF200 Gateway.",

homeassistant/components/velux/translations/pt.json

@@ -22,6 +22,13 @@
             }
         }
     },
+    "entity": {
+        "binary_sensor": {
+            "rain_sensor": {
+                "name": "Sensor de chuva"
+            }
+        }
+    },
     "services": {
         "reboot_gateway": {
             "description": "Reinicia a Gateway KLF200.",