homeassistant 2025.8.2__py3-none-any.whl → 2025.9.0b0__py3-none-any.whl

homeassistant/components/trend/translations/ga.json

@@ -10,7 +10,8 @@
             },
             "user": {
                 "data": {
-                    "entity_id": "Eintiteas a riana\u00edonn an braiteoir seo"
+                    "entity_id": "Eintiteas a riana\u00edonn an braiteoir seo",
+                    "name": "Ainm"
                 },
                 "description": "Ligeann an c\u00fant\u00f3ir treochta duit braiteoir a chruth\u00fa a thaispe\u00e1nann treocht st\u00e1dais uimhri\u00fail n\u00f3 tr\u00e9ith st\u00e1dais \u00f3 eintiteas eile.",
                 "title": "C\u00fant\u00f3ir treochta"

homeassistant/components/triggercmd/translations/ga.json

@@ -1,10 +1,19 @@
 {
     "config": {
+        "abort": {
+            "already_configured": "T\u00e1 an gl\u00e9as cumraithe cheana f\u00e9in"
+        },
         "error": {
-            "invalid_token": "Comhartha neamhbhail\u00ed"
+            "cannot_connect": "Theip ar an nascadh",
+            "invalid_auth": "F\u00edordheimhni\u00fa neamhbhail\u00ed",
+            "invalid_token": "Comhartha neamhbhail\u00ed",
+            "unknown": "Earr\u00e1id gan choinne"
         },
         "step": {
             "user": {
+                "data": {
+                    "token": "Comhartha rochtana"
+                },
                 "data_description": {
                     "token": "An comhartha \u00f3 leathanach treoracha TRIGGERcmd"
                 }

homeassistant/components/tts/translations/ga.json

@@ -20,6 +20,9 @@
                     "name": "Teanga"
                 }
             }
+        },
+        "speak": {
+            "name": "Labhair"
         }
     }
 }

homeassistant/components/tuya/__init__.py

@@ -154,8 +154,9 @@ async def async_setup_entry(hass: HomeAssistant, entry: TuyaConfigEntry) -> bool
     device_registry = dr.async_get(hass)
     for device in manager.device_map.values():
         LOGGER.debug(
-            "Register device %s: %s (function: %s, status range: %s)",
+            "Register device %s (online: %s): %s (function: %s, status range: %s)",
             device.id,
+            device.online,
             device.status,
             device.function,
             device.status_range,
@@ -165,6 +166,9 @@ async def async_setup_entry(hass: HomeAssistant, entry: TuyaConfigEntry) -> bool
             identifiers={(DOMAIN, device.id)},
             manufacturer="Tuya",
             name=device.name,
+            # Note: the model is overridden via entity.device_info property
+            # when the entity is created. If no entities are generated, it will
+            # stay as unsupported
             model=f"{device.product_name} (unsupported)",
             model_id=device.product_id,
         )
@@ -228,9 +232,10 @@ class DeviceListener(SharingDeviceListener):
     ) -> None:
         """Update device status."""
         LOGGER.debug(
-            "Received update for device %s: %s (updated properties: %s)",
+            "Received update for device %s (online: %s): %s (updated properties: %s)",
             device.id,
-            self.manager.device_map[device.id].status,
+            device.online,
+            device.status,
             updated_status_properties,
         )
         dispatcher_send(
@@ -245,8 +250,9 @@ class DeviceListener(SharingDeviceListener):
         self.hass.add_job(self.async_remove_device, device.id)
 
         LOGGER.debug(
-            "Add device %s: %s (function: %s, status range: %s)",
+            "Add device %s (online: %s): %s (function: %s, status range: %s)",
             device.id,
+            device.online,
             device.status,
             device.function,
             device.status_range,

homeassistant/components/tuya/alarm_control_panel.py

@@ -22,6 +22,7 @@ from . import TuyaConfigEntry
 from .const import TUYA_DISCOVERY_NEW, DPCode, DPType
 from .entity import TuyaEntity
 from .models import EnumTypeData
+from .util import get_dpcode
 
 
 @dataclass(frozen=True)
@@ -140,7 +141,7 @@ class TuyaAlarmEntity(TuyaEntity, AlarmControlPanelEntity):
             self._master_state = enum_type
 
         # Determine alarm message
-        if dp_code := self.find_dpcode(description.alarm_msg, prefer_function=True):
+        if dp_code := get_dpcode(self.device, description.alarm_msg):
             self._alarm_msg_dpcode = dp_code
 
     @property

homeassistant/components/tuya/binary_sensor.py

@@ -285,6 +285,9 @@ BINARY_SENSORS: dict[str, tuple[TuyaBinarySensorEntityDescription, ...]] = {
         ),
         TAMPER_BINARY_SENSOR,
     ),
+    # Siren Alarm
+    # https://developer.tuya.com/en/docs/iot/categorysgbj?id=Kaiuz37tlpbnu
+    "sgbj": (TAMPER_BINARY_SENSOR,),
     # Water Detector
     # https://developer.tuya.com/en/docs/iot/categorysj?id=Kaiuz3iub2sli
     "sj": (
@@ -314,6 +317,25 @@ BINARY_SENSORS: dict[str, tuple[TuyaBinarySensorEntityDescription, ...]] = {
         ),
         TAMPER_BINARY_SENSOR,
     ),
+    # Gateway control
+    # https://developer.tuya.com/en/docs/iot/wg?id=Kbcdadk79ejok
+    "wg2": (
+        TuyaBinarySensorEntityDescription(
+            key=DPCode.MASTER_STATE,
+            device_class=BinarySensorDeviceClass.PROBLEM,
+            entity_category=EntityCategory.DIAGNOSTIC,
+            on_value="alarm",
+        ),
+    ),
+    # Thermostat
+    # https://developer.tuya.com/en/docs/iot/f?id=K9gf45ld5l0t9
+    "wk": (
+        TuyaBinarySensorEntityDescription(
+            key=DPCode.VALVE_STATE,
+            translation_key="valve",
+            on_value="open",
+        ),
+    ),
     # Thermostatic Radiator Valve
     # Not documented
     "wkf": (

homeassistant/components/tuya/climate.py

@@ -27,6 +27,7 @@ from . import TuyaConfigEntry
 from .const import TUYA_DISCOVERY_NEW, DPCode, DPType
 from .entity import TuyaEntity
 from .models import IntegerTypeData
+from .util import get_dpcode
 
 TUYA_HVAC_TO_HA = {
     "auto": HVACMode.HEAT_COOL,
@@ -229,7 +230,7 @@ class TuyaClimateEntity(TuyaEntity, ClimateEntity):
                 self._attr_hvac_modes.append(description.switch_only_hvac_mode)
                 self._attr_preset_modes = unknown_hvac_modes
                 self._attr_supported_features |= ClimateEntityFeature.PRESET_MODE
-        elif self.find_dpcode(DPCode.SWITCH, prefer_function=True):
+        elif get_dpcode(self.device, DPCode.SWITCH):
             self._attr_hvac_modes = [
                 HVACMode.OFF,
                 description.switch_only_hvac_mode,
@@ -261,24 +262,24 @@ class TuyaClimateEntity(TuyaEntity, ClimateEntity):
             self._fan_mode_dp_code = enum_type.dpcode
 
         # Determine swing modes
-        if self.find_dpcode(
+        if get_dpcode(
+            self.device,
             (
                 DPCode.SHAKE,
                 DPCode.SWING,
                 DPCode.SWITCH_HORIZONTAL,
                 DPCode.SWITCH_VERTICAL,
             ),
-            prefer_function=True,
         ):
             self._attr_supported_features |= ClimateEntityFeature.SWING_MODE
             self._attr_swing_modes = [SWING_OFF]
-            if self.find_dpcode((DPCode.SHAKE, DPCode.SWING), prefer_function=True):
+            if get_dpcode(self.device, (DPCode.SHAKE, DPCode.SWING)):
                 self._attr_swing_modes.append(SWING_ON)
 
-            if self.find_dpcode(DPCode.SWITCH_HORIZONTAL, prefer_function=True):
+            if get_dpcode(self.device, DPCode.SWITCH_HORIZONTAL):
                 self._attr_swing_modes.append(SWING_HORIZONTAL)
 
-            if self.find_dpcode(DPCode.SWITCH_VERTICAL, prefer_function=True):
+            if get_dpcode(self.device, DPCode.SWITCH_VERTICAL):
                 self._attr_swing_modes.append(SWING_VERTICAL)
 
         if DPCode.SWITCH in self.device.function:

homeassistant/components/tuya/const.py

@@ -24,6 +24,7 @@ from homeassistant.const import (
     UnitOfPressure,
     UnitOfTemperature,
     UnitOfVolume,
+    UnitOfVolumetricFlux,
 )
 
 DOMAIN = "tuya"
@@ -66,6 +67,7 @@ PLATFORMS = [
     Platform.SIREN,
     Platform.SWITCH,
     Platform.VACUUM,
+    Platform.VALVE,
 ]
 
 
@@ -99,16 +101,17 @@ class DPCode(StrEnum):
     AIR_QUALITY = "air_quality"
     AIR_QUALITY_INDEX = "air_quality_index"
     ALARM_DELAY_TIME = "alarm_delay_time"
+    ALARM_MESSAGE = "alarm_message"
+    ALARM_MSG = "alarm_msg"
     ALARM_SWITCH = "alarm_switch"  # Alarm switch
     ALARM_TIME = "alarm_time"  # Alarm time
     ALARM_VOLUME = "alarm_volume"  # Alarm volume
-    ALARM_MESSAGE = "alarm_message"
-    ALARM_MSG = "alarm_msg"
     ANGLE_HORIZONTAL = "angle_horizontal"
     ANGLE_VERTICAL = "angle_vertical"
     ANION = "anion"  # Ionizer unit
     ARM_DOWN_PERCENT = "arm_down_percent"
     ARM_UP_PERCENT = "arm_up_percent"
+    ATMOSPHERIC_PRESSTURE = "atmospheric_pressture"  # Typo is in Tuya API
     BASIC_ANTI_FLICKER = "basic_anti_flicker"
     BASIC_DEVICE_VOLUME = "basic_device_volume"
     BASIC_FLIP = "basic_flip"
@@ -144,8 +147,8 @@ class DPCode(StrEnum):
     CLEAN_AREA = "clean_area"
     CLEAN_TIME = "clean_time"
     CLICK_SUSTAIN_TIME = "click_sustain_time"
-    CLOUD_RECIPE_NUMBER = "cloud_recipe_number"
     CLOSED_OPENED_KIT = "closed_opened_kit"
+    CLOUD_RECIPE_NUMBER = "cloud_recipe_number"
     CO_STATE = "co_state"
     CO_STATUS = "co_status"
     CO_VALUE = "co_value"
@@ -156,15 +159,23 @@ class DPCode(StrEnum):
     COLOUR_DATA = "colour_data"  # Colored light mode
     COLOUR_DATA_HSV = "colour_data_hsv"  # Colored light mode
     COLOUR_DATA_V2 = "colour_data_v2"  # Colored light mode
-    COOK_TEMPERATURE = "cook_temperature"
-    COOK_TIME = "cook_time"
     CONCENTRATION_SET = "concentration_set"  # Concentration setting
     CONTROL = "control"
     CONTROL_2 = "control_2"
     CONTROL_3 = "control_3"
     CONTROL_BACK = "control_back"
     CONTROL_BACK_MODE = "control_back_mode"
+    COOK_TEMPERATURE = "cook_temperature"
+    COOK_TIME = "cook_time"
     COUNTDOWN = "countdown"  # Countdown
+    COUNTDOWN_1 = "countdown_1"
+    COUNTDOWN_2 = "countdown_2"
+    COUNTDOWN_3 = "countdown_3"
+    COUNTDOWN_4 = "countdown_4"
+    COUNTDOWN_5 = "countdown_5"
+    COUNTDOWN_6 = "countdown_6"
+    COUNTDOWN_7 = "countdown_7"
+    COUNTDOWN_8 = "countdown_8"
     COUNTDOWN_LEFT = "countdown_left"
     COUNTDOWN_SET = "countdown_set"  # Countdown setting
     CRY_DETECTION_SWITCH = "cry_detection_switch"
@@ -191,11 +202,11 @@ class DPCode(StrEnum):
     FAN_COOL = "fan_cool"  # Cool wind
     FAN_DIRECTION = "fan_direction"  # Fan direction
     FAN_HORIZONTAL = "fan_horizontal"  # Horizontal swing flap angle
+    FAN_MODE = "fan_mode"
     FAN_SPEED = "fan_speed"
     FAN_SPEED_ENUM = "fan_speed_enum"  # Speed mode
     FAN_SPEED_PERCENT = "fan_speed_percent"  # Stepless speed
     FAN_SWITCH = "fan_switch"
-    FAN_MODE = "fan_mode"
     FAN_VERTICAL = "fan_vertical"  # Vertical swing flap angle
     FAR_DETECTION = "far_detection"
     FAULT = "fault"
@@ -208,6 +219,7 @@ class DPCode(StrEnum):
     FLOODLIGHT_LIGHTNESS = "floodlight_lightness"
     FLOODLIGHT_SWITCH = "floodlight_switch"
     FORWARD_ENERGY_TOTAL = "forward_energy_total"
+    FROST = "frost"  # Frost protection
     GAS_SENSOR_STATE = "gas_sensor_state"
     GAS_SENSOR_STATUS = "gas_sensor_status"
     GAS_SENSOR_VALUE = "gas_sensor_value"
@@ -215,8 +227,13 @@ class DPCode(StrEnum):
     HUMIDITY = "humidity"  # Humidity
     HUMIDITY_CURRENT = "humidity_current"  # Current humidity
     HUMIDITY_INDOOR = "humidity_indoor"  # Indoor humidity
+    HUMIDITY_OUTDOOR = "humidity_outdoor"  # Outdoor humidity
+    HUMIDITY_OUTDOOR_1 = "humidity_outdoor_1"  # Outdoor humidity
+    HUMIDITY_OUTDOOR_2 = "humidity_outdoor_2"  # Outdoor humidity
+    HUMIDITY_OUTDOOR_3 = "humidity_outdoor_3"  # Outdoor humidity
     HUMIDITY_SET = "humidity_set"  # Humidity setting
     HUMIDITY_VALUE = "humidity_value"  # Humidity
+    INSTALLATION_HEIGHT = "installation_height"
     IPC_WORK_MODE = "ipc_work_mode"
     LED_TYPE_1 = "led_type_1"
     LED_TYPE_2 = "led_type_2"
@@ -227,12 +244,18 @@ class DPCode(StrEnum):
     LEVEL_CURRENT = "level_current"
     LIGHT = "light"  # Light
     LIGHT_MODE = "light_mode"
+    LIQUID_DEPTH = "liquid_depth"
+    LIQUID_DEPTH_MAX = "liquid_depth_max"
+    LIQUID_LEVEL_PERCENT = "liquid_level_percent"
+    LIQUID_STATE = "liquid_state"
     LOCK = "lock"  # Lock / Child lock
-    MASTER_MODE = "master_mode"  # alarm mode
-    MASTER_STATE = "master_state"  # alarm state
     MACH_OPERATE = "mach_operate"
     MANUAL_FEED = "manual_feed"
+    MASTER_MODE = "master_mode"  # alarm mode
+    MASTER_STATE = "master_state"  # alarm state
     MATERIAL = "material"  # Material
+    MAX_SET = "max_set"
+    MINI_SET = "mini_set"
     MODE = "mode"  # Working mode / Mode
     MOODLIGHTING = "moodlighting"  # Mood light
     MOTION_RECORD = "motion_record"
@@ -243,6 +266,7 @@ class DPCode(StrEnum):
     MUFFLING = "muffling"  # Muffling
     NEAR_DETECTION = "near_detection"
     OPPOSITE = "opposite"
+    OXYGEN = "oxygen"  # Oxygen bar
     PAUSE = "pause"
     PERCENT_CONTROL = "percent_control"
     PERCENT_CONTROL_2 = "percent_control_2"
@@ -250,7 +274,6 @@ class DPCode(StrEnum):
     PERCENT_STATE = "percent_state"
     PERCENT_STATE_2 = "percent_state_2"
     PERCENT_STATE_3 = "percent_state_3"
-    POSITION = "position"
     PHASE_A = "phase_a"
     PHASE_B = "phase_b"
     PHASE_C = "phase_c"
@@ -260,20 +283,22 @@ class DPCode(StrEnum):
     PM25 = "pm25"
     PM25_STATE = "pm25_state"
     PM25_VALUE = "pm25_value"
+    POSITION = "position"
     POWDER_SET = "powder_set"  # Powder
     POWER = "power"
     POWER_GO = "power_go"
+    POWER_TOTAL = "power_total"
     PREHEAT = "preheat"
     PREHEAT_1 = "preheat_1"
     PREHEAT_2 = "preheat_2"
-    POWER_TOTAL = "power_total"
     PRESENCE_STATE = "presence_state"
     PRESSURE_STATE = "pressure_state"
     PRESSURE_VALUE = "pressure_value"
     PUMP = "pump"
     PUMP_RESET = "pump_reset"  # Water pump reset
     PUMP_TIME = "pump_time"  # Water pump duration
-    OXYGEN = "oxygen"  # Oxygen bar
+    RAIN_24H = "rain_24h"  # Total daily rainfall in mm
+    RAIN_RATE = "rain_rate"  # Rain intensity in mm/h
     RECORD_MODE = "record_mode"
     RECORD_SWITCH = "record_switch"  # Recording switch
     RELAY_STATUS = "relay_status"
@@ -306,6 +331,7 @@ class DPCode(StrEnum):
     STATUS = "status"
     STERILIZATION = "sterilization"  # Sterilization
     SUCTION = "suction"
+    SUPPLY_FREQUENCY = "supply_frequency"
     SWING = "swing"  # Swing mode
     SWITCH = "switch"  # Switch
     SWITCH_1 = "switch_1"  # Switch 1
@@ -356,13 +382,22 @@ class DPCode(StrEnum):
     TEMP_CONTROLLER = "temp_controller"
     TEMP_CORRECTION = "temp_correction"
     TEMP_CURRENT = "temp_current"  # Current temperature in °C
-    TEMP_CURRENT_F = "temp_current_f"  # Current temperature in °F
     TEMP_CURRENT_EXTERNAL = (
         "temp_current_external"  # Current external temperature in Celsius
     )
+    TEMP_CURRENT_EXTERNAL_1 = (
+        "temp_current_external_1"  # Current external temperature in Celsius
+    )
+    TEMP_CURRENT_EXTERNAL_2 = (
+        "temp_current_external_2"  # Current external temperature in Celsius
+    )
+    TEMP_CURRENT_EXTERNAL_3 = (
+        "temp_current_external_3"  # Current external temperature in Celsius
+    )
     TEMP_CURRENT_EXTERNAL_F = (
         "temp_current_external_f"  # Current external temperature in Fahrenheit
     )
+    TEMP_CURRENT_F = "temp_current_f"  # Current temperature in °F
     TEMP_INDOOR = "temp_indoor"  # Indoor temperature in °C
     TEMP_SET = "temp_set"  # Set the temperature in °C
     TEMP_SET_F = "temp_set_f"  # Set the temperature in °F
@@ -376,17 +411,19 @@ class DPCode(StrEnum):
     TOTAL_CLEAN_COUNT = "total_clean_count"
     TOTAL_CLEAN_TIME = "total_clean_time"
     TOTAL_FORWARD_ENERGY = "total_forward_energy"
-    TOTAL_TIME = "total_time"
     TOTAL_PM = "total_pm"
     TOTAL_POWER = "total_power"
+    TOTAL_TIME = "total_time"
     TVOC = "tvoc"
     UPPER_TEMP = "upper_temp"
     UPPER_TEMP_F = "upper_temp_f"
     UV = "uv"  # UV sterilization
+    UV_INDEX = "uv_index"
     UV_RUNTIME = "uv_runtime"  # UV runtime
     VA_BATTERY = "va_battery"
     VA_HUMIDITY = "va_humidity"
     VA_TEMPERATURE = "va_temperature"
+    VALVE_STATE = "valve_state"
     VOC_STATE = "voc_state"
     VOC_VALUE = "voc_value"
     VOICE_SWITCH = "voice_switch"
@@ -395,16 +432,18 @@ class DPCode(StrEnum):
     WARM = "warm"  # Heat preservation
     WARM_TIME = "warm_time"  # Heat preservation time
     WATER = "water"
+    WATER_LEVEL = "water_level"
     WATER_RESET = "water_reset"  # Resetting of water usage days
     WATER_SET = "water_set"  # Water level
     WATER_TIME = "water_time"  # Water usage duration
-    WATER_LEVEL = "water_level"
     WATERSENSOR_STATE = "watersensor_state"
     WEATHER_DELAY = "weather_delay"
     WET = "wet"  # Humidification
     WINDOW_CHECK = "window_check"
     WINDOW_STATE = "window_state"
     WINDSPEED = "windspeed"
+    WINDSPEED_AVG = "windspeed_avg"
+    WIND_DIRECT = "wind_direct"
     WIRELESS_BATTERYLOCK = "wireless_batterylock"
     WIRELESS_ELECTRICITY = "wireless_electricity"
     WORK_MODE = "work_mode"  # Working mode
@@ -490,6 +529,11 @@ UNITS = (
         aliases={"m3"},
         device_classes={SensorDeviceClass.GAS},
     ),
+    UnitOfMeasurement(
+        unit=UnitOfVolumetricFlux.MILLIMETERS_PER_HOUR,
+        aliases={"mm"},
+        device_classes={SensorDeviceClass.PRECIPITATION_INTENSITY},
+    ),
     UnitOfMeasurement(
         unit=LIGHT_LUX,
         aliases={"lux"},
@@ -497,7 +541,9 @@ UNITS = (
     ),
     UnitOfMeasurement(
         unit=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        aliases={"ug/m3", "µg/m3", "ug/m³"},
+        # The μ-char has 2 unicode variants \u00b5 and \u03bc
+        # The \u03bc variant (Greek Mu char) is recommended
+        aliases={"ug/m3", "\u03bcg/m3", "\u00b5g/m3", "ug/m³"},
         device_classes={
             SensorDeviceClass.NITROGEN_DIOXIDE,
             SensorDeviceClass.NITROGEN_MONOXIDE,

homeassistant/components/tuya/cover.py

@@ -23,6 +23,7 @@ from . import TuyaConfigEntry
 from .const import TUYA_DISCOVERY_NEW, DPCode, DPType
 from .entity import TuyaEntity
 from .models import IntegerTypeData
+from .util import get_dpcode
 
 
 @dataclass(frozen=True)
@@ -202,7 +203,7 @@ class TuyaCoverEntity(TuyaEntity, CoverEntity):
         self._attr_supported_features = CoverEntityFeature(0)
 
         # Check if this cover is based on a switch or has controls
-        if self.find_dpcode(description.key, prefer_function=True):
+        if get_dpcode(self.device, description.key):
             if device.function[description.key].type == "Boolean":
                 self._attr_supported_features |= (
                     CoverEntityFeature.OPEN | CoverEntityFeature.CLOSE

homeassistant/components/tuya/entity.py

@@ -72,22 +72,17 @@ class TuyaEntity(Entity):
         dptype: Literal[DPType.INTEGER],
     ) -> IntegerTypeData | None: ...
 
-    @overload
     def find_dpcode(
         self,
         dpcodes: str | DPCode | tuple[DPCode, ...] | None,
         *,
         prefer_function: bool = False,
-    ) -> DPCode | None: ...
+        dptype: DPType,
+    ) -> EnumTypeData | IntegerTypeData | None:
+        """Find type information for a matching DP code available for this device."""
+        if dptype not in (DPType.ENUM, DPType.INTEGER):
+            raise NotImplementedError("Only ENUM and INTEGER types are supported")
 
-    def find_dpcode(
-        self,
-        dpcodes: str | DPCode | tuple[DPCode, ...] | None,
-        *,
-        prefer_function: bool = False,
-        dptype: DPType | None = None,
-    ) -> DPCode | EnumTypeData | IntegerTypeData | None:
-        """Find a matching DP code available on for this device."""
         if dpcodes is None:
             return None
 
@@ -100,11 +95,6 @@ class TuyaEntity(Entity):
         if prefer_function:
             order = ["function", "status_range"]
 
-        # When we are not looking for a specific datatype, we can append status for
-        # searching
-        if not dptype:
-            order.append("status")
-
         for dpcode in dpcodes:
             for key in order:
                 if dpcode not in getattr(self.device, key):
@@ -133,9 +123,6 @@ class TuyaEntity(Entity):
                         continue
                     return integer_type
 
-                if dptype not in (DPType.ENUM, DPType.INTEGER):
-                    return dpcode
-
         return None
 
     def get_dptype(

homeassistant/components/tuya/fan.py

@@ -24,6 +24,17 @@ from . import TuyaConfigEntry
 from .const import TUYA_DISCOVERY_NEW, DPCode, DPType
 from .entity import TuyaEntity
 from .models import EnumTypeData, IntegerTypeData
+from .util import get_dpcode
+
+_DIRECTION_DPCODES = (DPCode.FAN_DIRECTION,)
+_OSCILLATE_DPCODES = (DPCode.SWITCH_HORIZONTAL, DPCode.SWITCH_VERTICAL)
+_SPEED_DPCODES = (
+    DPCode.FAN_SPEED_PERCENT,
+    DPCode.FAN_SPEED,
+    DPCode.SPEED,
+    DPCode.FAN_SPEED_ENUM,
+)
+_SWITCH_DPCODES = (DPCode.SWITCH_FAN, DPCode.FAN_SWITCH, DPCode.SWITCH)
 
 TUYA_SUPPORT_TYPE = {
     # Dehumidifier
@@ -46,6 +57,19 @@ TUYA_SUPPORT_TYPE = {
 }
 
 
+def _has_a_valid_dpcode(device: CustomerDevice) -> bool:
+    """Check if the device has at least one valid DP code."""
+    properties_to_check: list[DPCode | tuple[DPCode, ...] | None] = [
+        # Main control switch
+        _SWITCH_DPCODES,
+        # Other properties
+        _SPEED_DPCODES,
+        _OSCILLATE_DPCODES,
+        _DIRECTION_DPCODES,
+    ]
+    return any(get_dpcode(device, code) for code in properties_to_check)
+
+
 async def async_setup_entry(
     hass: HomeAssistant,
     entry: TuyaConfigEntry,
@@ -60,7 +84,7 @@ async def async_setup_entry(
         entities: list[TuyaFanEntity] = []
         for device_id in device_ids:
             device = hass_data.manager.device_map[device_id]
-            if device and device.category in TUYA_SUPPORT_TYPE:
+            if device.category in TUYA_SUPPORT_TYPE and _has_a_valid_dpcode(device):
                 entities.append(TuyaFanEntity(device, hass_data.manager))
         async_add_entities(entities)
 
@@ -90,9 +114,7 @@ class TuyaFanEntity(TuyaEntity, FanEntity):
         """Init Tuya Fan Device."""
         super().__init__(device, device_manager)
 
-        self._switch = self.find_dpcode(
-            (DPCode.SWITCH_FAN, DPCode.FAN_SWITCH, DPCode.SWITCH), prefer_function=True
-        )
+        self._switch = get_dpcode(self.device, _SWITCH_DPCODES)
 
         self._attr_preset_modes = []
         if enum_type := self.find_dpcode(
@@ -103,31 +125,23 @@ class TuyaFanEntity(TuyaEntity, FanEntity):
             self._attr_preset_modes = enum_type.range
 
         # Find speed controls, can be either percentage or a set of speeds
-        dpcodes = (
-            DPCode.FAN_SPEED_PERCENT,
-            DPCode.FAN_SPEED,
-            DPCode.SPEED,
-            DPCode.FAN_SPEED_ENUM,
-        )
         if int_type := self.find_dpcode(
-            dpcodes, dptype=DPType.INTEGER, prefer_function=True
+            _SPEED_DPCODES, dptype=DPType.INTEGER, prefer_function=True
         ):
             self._attr_supported_features |= FanEntityFeature.SET_SPEED
             self._speed = int_type
         elif enum_type := self.find_dpcode(
-            dpcodes, dptype=DPType.ENUM, prefer_function=True
+            _SPEED_DPCODES, dptype=DPType.ENUM, prefer_function=True
         ):
             self._attr_supported_features |= FanEntityFeature.SET_SPEED
             self._speeds = enum_type
 
-        if dpcode := self.find_dpcode(
-            (DPCode.SWITCH_HORIZONTAL, DPCode.SWITCH_VERTICAL), prefer_function=True
-        ):
+        if dpcode := get_dpcode(self.device, _OSCILLATE_DPCODES):
             self._oscillate = dpcode
             self._attr_supported_features |= FanEntityFeature.OSCILLATE
 
         if enum_type := self.find_dpcode(
-            DPCode.FAN_DIRECTION, dptype=DPType.ENUM, prefer_function=True
+            _DIRECTION_DPCODES, dptype=DPType.ENUM, prefer_function=True
         ):
             self._direction = enum_type
             self._attr_supported_features |= FanEntityFeature.DIRECTION

homeassistant/components/tuya/humidifier.py

@@ -21,7 +21,7 @@ from . import TuyaConfigEntry
 from .const import TUYA_DISCOVERY_NEW, DPCode, DPType
 from .entity import TuyaEntity
 from .models import IntegerTypeData
-from .util import ActionDPCodeNotFoundError
+from .util import ActionDPCodeNotFoundError, get_dpcode
 
 
 @dataclass(frozen=True)
@@ -35,6 +35,20 @@ class TuyaHumidifierEntityDescription(HumidifierEntityDescription):
     humidity: DPCode | None = None
 
 
+def _has_a_valid_dpcode(
+    device: CustomerDevice, description: TuyaHumidifierEntityDescription
+) -> bool:
+    """Check if the device has at least one valid DP code."""
+    properties_to_check: list[DPCode | tuple[DPCode, ...] | None] = [
+        # Main control switch
+        description.dpcode or DPCode(description.key),
+        # Other humidity properties
+        description.current_humidity,
+        description.humidity,
+    ]
+    return any(get_dpcode(device, code) for code in properties_to_check)
+
+
 HUMIDIFIERS: dict[str, TuyaHumidifierEntityDescription] = {
     # Dehumidifier
     # https://developer.tuya.com/en/docs/iot/categorycs?id=Kaiuz1vcz4dha
@@ -71,7 +85,9 @@ async def async_setup_entry(
         entities: list[TuyaHumidifierEntity] = []
         for device_id in device_ids:
             device = hass_data.manager.device_map[device_id]
-            if description := HUMIDIFIERS.get(device.category):
+            if (
+                description := HUMIDIFIERS.get(device.category)
+            ) and _has_a_valid_dpcode(device, description):
                 entities.append(
                     TuyaHumidifierEntity(device, hass_data.manager, description)
                 )
@@ -105,8 +121,8 @@ class TuyaHumidifierEntity(TuyaEntity, HumidifierEntity):
         self._attr_unique_id = f"{super().unique_id}{description.key}"
 
         # Determine main switch DPCode
-        self._switch_dpcode = self.find_dpcode(
-            description.dpcode or DPCode(description.key), prefer_function=True
+        self._switch_dpcode = get_dpcode(
+            self.device, description.dpcode or DPCode(description.key)
         )
 
         # Determine humidity parameters

homeassistant/components/tuya/icons.json

@@ -15,6 +15,9 @@
       },
       "tilt": {
         "default": "mdi:spirit-level"
+      },
+      "valve": {
+        "default": "mdi:pipe-valve"
       }
     },
     "button": {