homeassistant 2025.8.2__py3-none-any.whl → 2025.9.0__py3-none-any.whl

homeassistant/components/zha/translations/sk.json

@@ -258,6 +258,9 @@
             }
         },
         "button": {
+            "calibrate_valve": {
+                "name": "Kalibr\u00e1cia ventilu"
+            },
             "feed": {
                 "name": "K\u0155mi\u0165"
             },
@@ -364,7 +367,7 @@
                 "name": "\u010casova\u010d automatick\u00e9ho vypnutia vyp\u00edna\u010da"
             },
             "away_preset_temperature": {
-                "name": "Prednastaven\u00e1 teplota (mimo)"
+                "name": "Prednastaven\u00e1 teplota mimo"
             },
             "block_time": {
                 "name": "\u010cas blokovania"
@@ -399,6 +402,9 @@
             "calibration_vertical_run_time_up": {
                 "name": "Zv\u00fd\u0161enie \u010dasu vertik\u00e1lneho chodu kalibr\u00e1cie"
             },
+            "closing_duration": {
+                "name": "Trvanie uz\u00e1vierky"
+            },
             "comfort_humidity_max": {
                 "name": "Komfortn\u00e1 vlhkos\u0165 max"
             },
@@ -582,6 +588,12 @@
             "local_temperature_calibration": {
                 "name": "Miestny teplotn\u00fd posun"
             },
+            "long_press_duration": {
+                "name": "Dlh\u00e9 trvanie stla\u010denia"
+            },
+            "max_brightness": {
+                "name": "Maxim\u00e1lny jas"
+            },
             "max_heat_setpoint_limit": {
                 "name": "Limit maxim\u00e1lnej nastavenej hodnoty tepla"
             },
@@ -603,6 +615,9 @@
             "medium_motion_detection_sensitivity": {
                 "name": "Stredn\u00e1 citlivos\u0165 detekcie pohybu"
             },
+            "min_brightness": {
+                "name": "Minim\u00e1lny jas"
+            },
             "min_heat_setpoint_limit": {
                 "name": "Limit minim\u00e1lnej \u017eiadanej hodnoty tepla"
             },
@@ -627,6 +642,9 @@
             "motionless_sensitivity": {
                 "name": "Citlivos\u0165 detekcie bez pohybu"
             },
+            "motor_start_delay": {
+                "name": "Oneskorenie \u0161tartu motora"
+            },
             "move_sensitivity": {
                 "name": "Citlivos\u0165 na pohyb"
             },
@@ -663,6 +681,9 @@
             "open_window_event_duration": {
                 "name": "Trvanie udalosti otvoren\u00e9ho okna"
             },
+            "opening_duration": {
+                "name": "Trvanie otvorenia"
+            },
             "output_time": {
                 "name": "V\u00fdstupn\u00fd \u010das"
             },
@@ -705,6 +726,12 @@
             "regulator_set_point": {
                 "name": "Nastaven\u00e1 hodnota regul\u00e1tora"
             },
+            "reporting_interval": {
+                "name": "Interval hl\u00e1senia"
+            },
+            "sensitivity": {
+                "name": "Citlivos\u0165"
+            },
             "serving_size": {
                 "name": "Pod\u00e1vanie na d\u00e1vkovanie"
             },
@@ -848,12 +875,18 @@
             "breaker_status": {
                 "name": "Stav isti\u010da"
             },
+            "calibration_mode": {
+                "name": "Kalibra\u010dn\u00fd re\u017eim"
+            },
             "click_mode": {
                 "name": "Re\u017eim kliknutia"
             },
             "control_type": {
                 "name": "Typ ovl\u00e1dania"
             },
+            "ctrl_sequence_of_oper": {
+                "name": "Postupnos\u0165 ovl\u00e1dania"
+            },
             "decoupled_mode": {
                 "name": "Odpojen\u00fd re\u017eim"
             },
@@ -887,6 +920,9 @@
             "display_unit": {
                 "name": "Zobrazovacia jednotka"
             },
+            "displayed_temperature": {
+                "name": "Zobrazen\u00e1 teplota"
+            },
             "eco_mode": {
                 "name": "Re\u017eim eco"
             },
@@ -947,6 +983,9 @@
             "mode": {
                 "name": "Re\u017eim"
             },
+            "mode_switch": {
+                "name": "Prep\u00edna\u010d re\u017eimu"
+            },
             "monitoring_mode": {
                 "name": "Re\u017eim monitorovania"
             },
@@ -974,6 +1013,9 @@
             "output_mode": {
                 "name": "V\u00fdstupn\u00fd re\u017eim"
             },
+            "phase": {
+                "name": "F\u00e1za"
+            },
             "pilot_wire_mode": {
                 "name": "Re\u017eim pilotn\u00e9ho dr\u00f4tu"
             },
@@ -1239,6 +1281,9 @@
             "motion_distance": {
                 "name": "Vzdialenos\u0165 pohybu"
             },
+            "motor_state": {
+                "name": "Stav motora"
+            },
             "motor_stepcount": {
                 "name": "Po\u010det krokov motora"
             },
@@ -1248,6 +1293,9 @@
             "opening": {
                 "name": "Otv\u00e1ra sa"
             },
+            "operating_mode": {
+                "name": "Prev\u00e1dzkov\u00fd re\u017eim"
+            },
             "overheated": {
                 "name": "Ochrana proti prehriatiu"
             },
@@ -1407,6 +1455,9 @@
             "total_power_factor": {
                 "name": "Celkov\u00fd \u00fa\u010dinn\u00edk"
             },
+            "valve_adapt_status": {
+                "name": "Stav prisp\u00f4sobenia ventilu"
+            },
             "valve_duration": {
                 "name": "Trvanie zavla\u017eovania"
             },
@@ -1469,6 +1520,9 @@
             "detach_relay": {
                 "name": "Odpojenie rel\u00e9"
             },
+            "dimmer_mode": {
+                "name": "Re\u017eim stmievania"
+            },
             "disable_clear_notifications_double_tap": {
                 "name": "Zak\u00e1zanie konfigur\u00e1cie 2x \u0165uknite na polo\u017eku pre vymazanie ozn\u00e1men\u00ed"
             },
@@ -1511,6 +1565,9 @@
             "firmware_progress_led": {
                 "name": "Kontrolka priebehu firmv\u00e9ru"
             },
+            "flip_indicator_light": {
+                "name": "Kontrolka preklopenia"
+            },
             "frient_com_1": {
                 "name": "COM 1"
             },
@@ -1640,6 +1697,12 @@
             "turbo_mode": {
                 "name": "Turbo re\u017eim"
             },
+            "turn_on_led_when_off": {
+                "name": "Zapn\u00fa\u0165 LED di\u00f3du, ke\u010f je vypnut\u00e1"
+            },
+            "turn_on_led_when_on": {
+                "name": "Zapn\u00fa\u0165 LED di\u00f3du pri zapnut\u00ed"
+            },
             "use_internal_window_detection": {
                 "name": "Pou\u017eitie internej detekcie okien"
             },
@@ -1663,6 +1726,9 @@
             },
             "window_detection_function": {
                 "name": "Invertova\u0165 detekciu okna"
+            },
+            "window_open": {
+                "name": "Otvoren\u00e9 okno"
             }
         }
     },
@@ -1908,7 +1974,7 @@
                     "name": "QR k\u00f3d"
                 },
                 "source_ieee": {
-                    "description": "IEEE adresa prip\u00e1jaj\u00faceho sa zariadenia (mus\u00ed by\u0165 kombinovan\u00e1 s po\u013eom \"Install code\").",
+                    "description": "IEEE adresa prip\u00e1jaj\u00faceho sa zariadenia (mus\u00ed by\u0165 kombinovan\u00e1 s po\u013eom 'In\u0161tala\u010dn\u00fd k\u00f3d').",
                     "name": "Zdroj IEEE"
                 }
             },
@@ -2032,7 +2098,7 @@
                     "name": "Re\u017eim"
                 },
                 "strobe": {
-                    "description": "Pole Strobe sa pou\u017e\u00edva ako 2-bitov\u00fd v\u00fdpo\u010det a ur\u010duje, \u010di sa okrem zvukovej sir\u00e9ny vy\u017eaduje aj vizu\u00e1lna indik\u00e1cia, ako je uveden\u00e9 v tabu\u013eke 8-21 \u0161pecifik\u00e1cie ZCL. \"0\" znamen\u00e1 bez stroboskopu, \"1\" znamen\u00e1 stroboskop. Ak je pole strobe (stroboskop) \"1\" a Warning Mode (V\u00fdstra\u017en\u00fd re\u017eim) \"0\" (\"Stop\"), aktivuje sa iba stroboskop.",
+                    "description": "Pole Strobe sa pou\u017e\u00edva ako 2-bitov\u00fd v\u00fdpo\u010det a ur\u010duje, \u010di sa okrem zvukovej sir\u00e9ny vy\u017eaduje aj vizu\u00e1lna indik\u00e1cia, ako je uveden\u00e9 v tabu\u013eke 8-21 \u0161pecifik\u00e1cie ZCL. \"0\" znamen\u00e1 bez stroboskopu, \"1\" znamen\u00e1 stroboskop. Ak je pole strobe (stroboskop) \u201d1\u201d a Warning Mode (V\u00fdstra\u017en\u00fd re\u017eim) \"0\" (\u201dStop\u201d), aktivuje sa iba stroboskop.",
                     "name": "Stroboskop"
                 }
             },

homeassistant/components/zha/translations/zh-Hans.json

@@ -258,6 +258,9 @@
             }
         },
         "button": {
+            "calibrate_valve": {
+                "name": "\u6821\u51c6\u9600\u95e8"
+            },
             "feed": {
                 "name": "\u5582\u98df"
             },
@@ -399,6 +402,9 @@
             "calibration_vertical_run_time_up": {
                 "name": "\u5411\u4e0a\u6821\u51c6\u5782\u76f4\u8fd0\u884c\u65f6\u95f4"
             },
+            "closing_duration": {
+                "name": "\u5173\u95ed\u65f6\u957f"
+            },
             "comfort_humidity_max": {
                 "name": "\u6700\u9ad8\u8212\u9002\u6e7f\u5ea6"
             },
@@ -459,6 +465,9 @@
             "display_inactive_brightness": {
                 "name": "\u663e\u793a\u975e\u6d3b\u52a8\u4eae\u5ea6"
             },
+            "display_on_time": {
+                "name": "\u51c6\u65f6\u663e\u793a"
+            },
             "double_tap_down_level": {
                 "name": "\u53cc\u51fb\u964d\u4f4e\u7ea7\u522b"
             },
@@ -582,6 +591,12 @@
             "local_temperature_calibration": {
                 "name": "\u5c40\u90e8\u6e29\u5ea6\u504f\u79fb"
             },
+            "long_press_duration": {
+                "name": "\u957f\u6309\u65f6\u957f"
+            },
+            "max_brightness": {
+                "name": "\u6700\u9ad8\u4eae\u5ea6"
+            },
             "max_heat_setpoint_limit": {
                 "name": "\u6700\u5927\u70ed\u91cf\u8bbe\u5b9a\u70b9\u9650\u5236"
             },
@@ -603,6 +618,9 @@
             "medium_motion_detection_sensitivity": {
                 "name": "\u4e2d\u7b49\u8fd0\u52a8\u68c0\u6d4b\u7075\u654f\u5ea6"
             },
+            "min_brightness": {
+                "name": "\u6700\u4f4e\u4eae\u5ea6"
+            },
             "min_heat_setpoint_limit": {
                 "name": "\u6700\u5c0f\u70ed\u91cf\u8bbe\u5b9a\u70b9\u9650\u5236"
             },
@@ -627,6 +645,9 @@
             "motionless_sensitivity": {
                 "name": "\u9759\u6b62\u68c0\u6d4b\u7075\u654f\u5ea6"
             },
+            "motor_start_delay": {
+                "name": "\u7535\u673a\u542f\u52a8\u5ef6\u65f6"
+            },
             "move_sensitivity": {
                 "name": "\u8fd0\u52a8\u7075\u654f\u5ea6"
             },
@@ -663,6 +684,9 @@
             "open_window_event_duration": {
                 "name": "\u5f00\u7a97\u4e8b\u4ef6\u65f6\u957f"
             },
+            "opening_duration": {
+                "name": "\u5f00\u653e\u65f6\u957f"
+            },
             "output_time": {
                 "name": "\u8f93\u51fa\u65f6\u95f4"
             },
@@ -705,6 +729,12 @@
             "regulator_set_point": {
                 "name": "\u8c03\u8282\u5668\u8bbe\u5b9a\u70b9"
             },
+            "reporting_interval": {
+                "name": "\u62a5\u544a\u95f4\u9694"
+            },
+            "sensitivity": {
+                "name": "\u654f\u611f\u5ea6"
+            },
             "serving_size": {
                 "name": "\u7528\u4e8e\u5206\u914d"
             },
@@ -848,12 +878,18 @@
             "breaker_status": {
                 "name": "\u65ad\u8def\u5668\u72b6\u6001"
             },
+            "calibration_mode": {
+                "name": "\u6821\u51c6\u6a21\u5f0f"
+            },
             "click_mode": {
                 "name": "\u70b9\u51fb\u6a21\u5f0f"
             },
             "control_type": {
                 "name": "\u63a7\u5236\u7c7b\u578b"
             },
+            "ctrl_sequence_of_oper": {
+                "name": "\u63a7\u5236\u5e8f\u5217"
+            },
             "decoupled_mode": {
                 "name": "\u89e3\u8026\u6a21\u5f0f\uff08\u8f6c\u65e0\u7ebf\u5f00\u5173\uff09"
             },
@@ -887,6 +923,9 @@
             "display_unit": {
                 "name": "\u663e\u793a\u5355\u4f4d"
             },
+            "displayed_temperature": {
+                "name": "\u663e\u793a\u6e29\u5ea6"
+            },
             "eco_mode": {
                 "name": "\u73af\u4fdd\u6a21\u5f0f"
             },
@@ -947,6 +986,9 @@
             "mode": {
                 "name": "\u6a21\u5f0f"
             },
+            "mode_switch": {
+                "name": "\u6a21\u5f0f\u5207\u6362"
+            },
             "monitoring_mode": {
                 "name": "\u76d1\u63a7\u6a21\u5f0f"
             },
@@ -974,6 +1016,9 @@
             "output_mode": {
                 "name": "\u8f93\u51fa\u6a21\u5f0f"
             },
+            "phase": {
+                "name": "\u9636\u6bb5"
+            },
             "pilot_wire_mode": {
                 "name": "\u5bfc\u9891\u7ebf\u6a21\u5f0f"
             },
@@ -1239,6 +1284,9 @@
             "motion_distance": {
                 "name": "\u8fd0\u52a8\u8ddd\u79bb"
             },
+            "motor_state": {
+                "name": "\u7535\u673a\u72b6\u6001"
+            },
             "motor_stepcount": {
                 "name": "\u7535\u673a\u6b65\u6570"
             },
@@ -1248,6 +1296,9 @@
             "opening": {
                 "name": "\u6b63\u5728\u6253\u5f00"
             },
+            "operating_mode": {
+                "name": "\u64cd\u4f5c\u6a21\u5f0f"
+            },
             "overheated": {
                 "name": "\u8fc7\u70ed\u4fdd\u62a4"
             },
@@ -1407,6 +1458,9 @@
             "total_power_factor": {
                 "name": "\u603b\u529f\u7387\u56e0\u6570"
             },
+            "valve_adapt_status": {
+                "name": "\u9600\u95e8\u9002\u914d\u72b6\u51b5"
+            },
             "valve_duration": {
                 "name": "\u704c\u6e89\u65f6\u957f"
             },
@@ -1469,6 +1523,9 @@
             "detach_relay": {
                 "name": "\u65ad\u5f00\u7ee7\u7535\u5668"
             },
+            "dimmer_mode": {
+                "name": "\u8c03\u5149\u6a21\u5f0f"
+            },
             "disable_clear_notifications_double_tap": {
                 "name": "\u7981\u7528\u914d\u7f6e 2 \u6b21\u70b9\u51fb\u4ee5\u6e05\u9664\u901a\u77e5"
             },
@@ -1511,6 +1568,9 @@
             "firmware_progress_led": {
                 "name": "\u56fa\u4ef6\u8fdb\u5ea6 LED"
             },
+            "flip_indicator_light": {
+                "name": "\u7ffb\u76d6\u6307\u793a\u706f"
+            },
             "frient_com_1": {
                 "name": "COM 1"
             },
@@ -1640,6 +1700,12 @@
             "turbo_mode": {
                 "name": "\u589e\u5f3a\u6a21\u5f0f"
             },
+            "turn_on_led_when_off": {
+                "name": "\u5173\u95ed\u65f6\u6253\u5f00 LED"
+            },
+            "turn_on_led_when_on": {
+                "name": "\u5f00\u542f\u65f6\u6253\u5f00 LED"
+            },
             "use_internal_window_detection": {
                 "name": "\u4f7f\u7528\u5185\u90e8\u7a97\u53e3\u68c0\u6d4b"
             },
@@ -1663,6 +1729,9 @@
             },
             "window_detection_function": {
                 "name": "\u53cd\u8f6c\u7a97\u53e3\u68c0\u6d4b"
+            },
+            "window_open": {
+                "name": "\u7a97\u6253\u5f00"
             }
         }
     },

homeassistant/components/zha/translations/zh-Hant.json

@@ -258,6 +258,9 @@
             }
         },
         "button": {
+            "calibrate_valve": {
+                "name": "\u6821\u6e96\u95a5\u9580"
+            },
             "feed": {
                 "name": "\u9935\u98df"
             },
@@ -399,6 +402,9 @@
             "calibration_vertical_run_time_up": {
                 "name": "\u6821\u6b63\u5782\u76f4\u57f7\u884c\u6642\u9593\u589e\u52a0"
             },
+            "closing_duration": {
+                "name": "\u95dc\u9589\u6642\u9577"
+            },
             "comfort_humidity_max": {
                 "name": "\u6700\u9ad8\u8212\u9069\u6fd5\u5ea6"
             },
@@ -459,6 +465,9 @@
             "display_inactive_brightness": {
                 "name": "\u986f\u793a\u975e\u6d3b\u52d5\u4eae\u5ea6"
             },
+            "display_on_time": {
+                "name": "\u6e96\u6642\u986f\u793a"
+            },
             "double_tap_down_level": {
                 "name": "\u96d9\u64ca\u5411\u4e0b\u7b49\u7d1a"
             },
@@ -582,6 +591,12 @@
             "local_temperature_calibration": {
                 "name": "\u672c\u5730\u6eab\u5ea6\u504f\u79fb\u8abf\u6574"
             },
+            "long_press_duration": {
+                "name": "\u9577\u6309\u6642\u9577"
+            },
+            "max_brightness": {
+                "name": "\u6700\u9ad8\u4eae\u5ea6"
+            },
             "max_heat_setpoint_limit": {
                 "name": "\u6700\u9ad8\u71b1\u76ee\u6a19\u503c\u9650\u5236"
             },
@@ -603,6 +618,9 @@
             "medium_motion_detection_sensitivity": {
                 "name": "\u4e2d\u52d5\u4f5c\u611f\u6e2c\u9748\u654f\u5ea6"
             },
+            "min_brightness": {
+                "name": "\u6700\u4f4e\u4eae\u5ea6"
+            },
             "min_heat_setpoint_limit": {
                 "name": "\u6700\u4f4e\u71b1\u76ee\u6a19\u503c\u9650\u5236"
             },
@@ -627,6 +645,9 @@
             "motionless_sensitivity": {
                 "name": "\u975c\u6b62\u611f\u6e2c\u9748\u654f\u5ea6"
             },
+            "motor_start_delay": {
+                "name": "\u99ac\u9054\u555f\u52d5\u5ef6\u6642"
+            },
             "move_sensitivity": {
                 "name": "\u52d5\u4f5c\u9748\u654f\u5ea6"
             },
@@ -663,6 +684,9 @@
             "open_window_event_duration": {
                 "name": "\u958b\u7a97\u4e8b\u4ef6\u6301\u7e8c\u6642\u9593"
             },
+            "opening_duration": {
+                "name": "\u958b\u555f\u6642\u9577"
+            },
             "output_time": {
                 "name": "\u8f38\u51fa\u6642\u9593"
             },
@@ -705,6 +729,12 @@
             "regulator_set_point": {
                 "name": "\u8abf\u7bc0\u5668\u76ee\u6a19\u503c"
             },
+            "reporting_interval": {
+                "name": "\u56de\u5831\u9593\u9694"
+            },
+            "sensitivity": {
+                "name": "\u9748\u654f\u5ea6"
+            },
             "serving_size": {
                 "name": "\u670d\u52d9\u5206\u914d"
             },
@@ -848,12 +878,18 @@
             "breaker_status": {
                 "name": "\u65b7\u8def\u5668\u72c0\u614b"
             },
+            "calibration_mode": {
+                "name": "\u6821\u6b63\u6a21\u5f0f"
+            },
             "click_mode": {
                 "name": "\u9ede\u64ca\u6a21\u5f0f"
             },
             "control_type": {
                 "name": "\u63a7\u5236\u985e\u578b"
             },
+            "ctrl_sequence_of_oper": {
+                "name": "\u63a7\u5236\u5e8f\u5217"
+            },
             "decoupled_mode": {
                 "name": "\u7121\u7dda\u958b\u95dc\u6a21\u5f0f"
             },
@@ -887,6 +923,9 @@
             "display_unit": {
                 "name": "\u986f\u793a\u55ae\u4f4d"
             },
+            "displayed_temperature": {
+                "name": "\u986f\u793a\u6eab\u5ea6"
+            },
             "eco_mode": {
                 "name": "\u7bc0\u80fd\u6a21\u5f0f"
             },
@@ -947,6 +986,9 @@
             "mode": {
                 "name": "\u6a21\u5f0f"
             },
+            "mode_switch": {
+                "name": "\u6a21\u5f0f\u5207\u63db"
+            },
             "monitoring_mode": {
                 "name": "\u76e3\u63a7\u6a21\u5f0f"
             },
@@ -974,6 +1016,9 @@
             "output_mode": {
                 "name": "\u8f38\u51fa\u6a21\u5f0f"
             },
+            "phase": {
+                "name": "\u76f8\u4f4d"
+            },
             "pilot_wire_mode": {
                 "name": "\u5c0e\u7dda\u6a21\u5f0f"
             },
@@ -1239,6 +1284,9 @@
             "motion_distance": {
                 "name": "\u79fb\u52d5\u8ddd\u96e2"
             },
+            "motor_state": {
+                "name": "\u99ac\u9054\u72c0\u614b"
+            },
             "motor_stepcount": {
                 "name": "\u99ac\u9054\u6b65\u6578"
             },
@@ -1248,6 +1296,9 @@
             "opening": {
                 "name": "\u958b\u555f\u4e2d"
             },
+            "operating_mode": {
+                "name": "\u64cd\u4f5c\u6a21\u5f0f"
+            },
             "overheated": {
                 "name": "\u904e\u71b1\u4fdd\u8b77"
             },
@@ -1407,6 +1458,9 @@
             "total_power_factor": {
                 "name": "\u7e3d\u529f\u7387\u56e0\u6578"
             },
+            "valve_adapt_status": {
+                "name": "\u95a5\u9580\u9069\u61c9\u72c0\u614b"
+            },
             "valve_duration": {
                 "name": "\u704c\u6e89\u6301\u7e8c\u6642\u9593"
             },
@@ -1469,6 +1523,9 @@
             "detach_relay": {
                 "name": "\u65b7\u958b\u7e7c\u96fb\u5668"
             },
+            "dimmer_mode": {
+                "name": "\u5fae\u5149\u6a21\u5f0f"
+            },
             "disable_clear_notifications_double_tap": {
                 "name": "\u95dc\u9589\u8a2d\u5b9a\u9ede\u64ca 2 \u6b21\u4ee5\u6e05\u9664\u901a\u77e5"
             },
@@ -1511,6 +1568,9 @@
             "firmware_progress_led": {
                 "name": "\u97cc\u9ad4\u9032\u5ea6 LED"
             },
+            "flip_indicator_light": {
+                "name": "\u7ffb\u8f49\u6307\u793a\u71c8"
+            },
             "frient_com_1": {
                 "name": "COM 1"
             },
@@ -1640,6 +1700,12 @@
             "turbo_mode": {
                 "name": "\u5168\u901f\u6a21\u5f0f"
             },
+            "turn_on_led_when_off": {
+                "name": "\u95dc\u9589\u6642\u958b\u555f LED"
+            },
+            "turn_on_led_when_on": {
+                "name": "\u958b\u555f\u6642\u958b\u555f LED"
+            },
             "use_internal_window_detection": {
                 "name": "\u4f7f\u7528\u5167\u90e8\u8996\u7a97\u5075\u6e2c"
             },
@@ -1663,6 +1729,9 @@
             },
             "window_detection_function": {
                 "name": "\u5012\u7f6e\u7a97\u6236\u5075\u6e2c"
+            },
+            "window_open": {
+                "name": "\u7a97\u6236\u958b\u555f"
             }
         }
     },

homeassistant/components/zimi/cover.py

@@ -28,9 +28,11 @@ async def async_setup_entry(
 
     api = config_entry.runtime_data
 
-    doors = [ZimiCover(device, api) for device in api.doors]
+    covers = [ZimiCover(device, api) for device in api.blinds]
 
-    async_add_entities(doors)
+    covers.extend(ZimiCover(device, api) for device in api.doors)
+
+    async_add_entities(covers)
 
 
 class ZimiCover(ZimiEntity, CoverEntity):
@@ -81,9 +83,9 @@ class ZimiCover(ZimiEntity, CoverEntity):
 
     async def async_set_cover_position(self, **kwargs: Any) -> None:
         """Open the cover/door to a specified percentage."""
-        if position := kwargs.get("position"):
-            _LOGGER.debug("Sending set_cover_position(%d) for %s", position, self.name)
-            await self._device.open_to_percentage(position)
+        position = kwargs.get("position", 0)
+        _LOGGER.debug("Sending set_cover_position(%d) for %s", position, self.name)
+        await self._device.open_to_percentage(position)
 
     async def async_stop_cover(self, **kwargs: Any) -> None:
         """Stop the cover."""

homeassistant/components/zimi/manifest.json

@@ -6,5 +6,5 @@
   "documentation": "https://www.home-assistant.io/integrations/zimi",
   "iot_class": "local_push",
   "quality_scale": "bronze",
-  "requirements": ["zcc-helper==3.5.2"]
+  "requirements": ["zcc-helper==3.6"]
 }

homeassistant/components/zimi/quality_scale.yaml

@@ -16,6 +16,7 @@ rules:
     status: done
     comment: |
       https://mark_hannon@bitbucket.org/mark_hannon/zcc.git
+      https://bitbucket.org/mark_hannon/zcc/src/master/bitbucket-pipelines.yml
   docs-actions:
     status: exempt
     comment: |