homeassistant 2025.8.2__py3-none-any.whl → 2025.8.3__py3-none-any.whl

homeassistant/components/zha/translations/ga.json

@@ -154,6 +154,7 @@
         },
         "light": {
             "light": {
+                "name": "Solas",
                 "state_attributes": {
                     "effect": {
                         "state": {
@@ -448,6 +449,9 @@
             "mini_set": {
                 "name": "C\u00e9atad\u00e1n \u00edosta leachtach"
             },
+            "minimum_level": {
+                "name": "Leibh\u00e9al \u00edosta maolaithe ualaigh"
+            },
             "motion_detection_sensitivity": {
                 "name": "\u00cdogaireacht braite gluaisne"
             },
@@ -466,12 +470,24 @@
             "off_led_intensity": {
                 "name": "D\u00e9ine LED as"
             },
+            "off_transition_time": {
+                "name": "Am aistrithe lasmuigh"
+            },
             "on_led_intensity": {
                 "name": "Ar dh\u00e9ine LED"
             },
+            "on_level": {
+                "name": "Ar leibh\u00e9al"
+            },
+            "on_off_transition_time": {
+                "name": "Am aistrithe ar si\u00fal/as"
+            },
             "on_time": {
                 "name": "In am"
             },
+            "on_transition_time": {
+                "name": "Ar am aistrithe"
+            },
             "open_window_detection_guard_period": {
                 "name": "Tr\u00e9imhse garda braite fuinneoige oscailte"
             },
@@ -484,6 +500,9 @@
             "output_time": {
                 "name": "Am aschuir"
             },
+            "portion_weight": {
+                "name": "Me\u00e1chan cuid"
+            },
             "presence_detection_timeout": {
                 "name": "Am scoir braite l\u00e1ithreachta"
             },
@@ -502,12 +521,27 @@
             "radar_sensitivity": {
                 "name": "\u00cdogaireacht radair"
             },
+            "ramp_rate_off_to_on_local": {
+                "name": "R\u00e1ta rampa \u00e1iti\u00fail as go dt\u00ed ar"
+            },
+            "ramp_rate_off_to_on_remote": {
+                "name": "R\u00e1ta rampa iarg\u00falta as go ar"
+            },
+            "ramp_rate_on_to_off_local": {
+                "name": "R\u00e1ta rampa \u00e1iti\u00fail ar aghaidh go dt\u00ed as"
+            },
+            "ramp_rate_on_to_off_remote": {
+                "name": "R\u00e1ta rampa iarg\u00falta ar si\u00fal go m\u00fachta"
+            },
             "regulation_setpoint_offset": {
                 "name": "Frith\u00e1ireamh socraithe rial\u00e1la"
             },
             "regulator_set_point": {
                 "name": "Socrphointe rialt\u00f3ra"
             },
+            "serving_size": {
+                "name": "Ag freastal le d\u00e1ileadh"
+            },
             "shutdown_timer": {
                 "name": "Amad\u00f3ir m\u00fachta"
             },
@@ -532,6 +566,12 @@
             "sound_volume": {
                 "name": "Toirt fuaime"
             },
+            "start_up_color_temperature": {
+                "name": "Teocht datha tosaithe"
+            },
+            "start_up_current_level": {
+                "name": "Leibh\u00e9al reatha tosaithe"
+            },
             "state_after_power_restored": {
                 "name": "Leibh\u00e9al maolaithe r\u00e9amhshocraithe tosaithe"
             },
@@ -565,6 +605,9 @@
             "tilt_position_percentage_after_move_to_level": {
                 "name": "C\u00e9atad\u00e1n su\u00edomh claonta tar \u00e9is bogadh go leibh\u00e9al"
             },
+            "timer_duration": {
+                "name": "Fad an ama"
+            },
             "timer_time_left": {
                 "name": "Am an lasc ama at\u00e1 f\u00e1gtha"
             },
@@ -854,6 +897,7 @@
             "adaptation_run_status": {
                 "name": "St\u00e1das rith oiri\u00fanaithe",
                 "state": {
+                    "nothing": "D\u00edomhaoin",
                     "something": "St\u00e1t"
                 },
                 "state_attributes": {
@@ -962,7 +1006,11 @@
                 "name": "Am tosaithe uisci\u00fach\u00e1in"
             },
             "last_action": {
-                "name": "Gn\u00edomh deireanach"
+                "name": "Gn\u00edomh deireanach",
+                "state": {
+                    "lock": "Faoi ghlas",
+                    "unlock": "D\u00edghlas\u00e1ilte"
+                }
             },
             "last_action_source": {
                 "name": "Foinse an ghn\u00edmh dheireanaigh",
@@ -1360,6 +1408,9 @@
             "prioritize_external_temperature_sensor": {
                 "name": "Tabhair t\u00fas \u00e1ite don braiteoir teochta seachtrach"
             },
+            "relay_click_in_on_off_mode": {
+                "name": "D\u00edchumasaigh clice\u00e1il seala\u00edochta i m\u00f3d ar si\u00fal as"
+            },
             "scale_protection": {
                 "name": "Cosaint sc\u00e1la"
             },
@@ -1381,6 +1432,9 @@
             "siren_on": {
                 "name": "Sir\u00e9in ar si\u00fal"
             },
+            "smart_bulb_mode": {
+                "name": "M\u00f3d bolg\u00e1in chliste"
+            },
             "smart_fan_mode": {
                 "name": "M\u00f3d fean cliste"
             },
@@ -1402,6 +1456,9 @@
             "touch_control": {
                 "name": "Rial\u00fa tadhaill"
             },
+            "trigger_indicator": {
+                "name": "T\u00e1scaire spreagtha LED"
+            },
             "turbo_mode": {
                 "name": "M\u00f3d turbo"
             },
@@ -1411,6 +1468,9 @@
             "use_load_balancing": {
                 "name": "Bain \u00fas\u00e1id as cothrom\u00fa ualaigh"
             },
+            "valve_detection": {
+                "name": "Brath comhla"
+            },
             "valve_on_off_1": {
                 "name": "Comhla 1"
             },
@@ -1419,6 +1479,12 @@
             },
             "water_shortage_auto_close": {
                 "name": "D\u00fanadh uathoibr\u00edoch ganntanas uisce"
+            },
+            "window_detection": {
+                "name": "Brath fuinneoige"
+            },
+            "window_detection_function": {
+                "name": "Brath fuinneoige inbh\u00e9artaithe"
             }
         }
     },
@@ -1453,8 +1519,47 @@
         }
     },
     "services": {
+        "clear_lock_user_code": {
+            "description": "Glanann s\u00e9 c\u00f3d \u00fas\u00e1ideora \u00f3 ghlas.",
+            "fields": {
+                "code_slot": {
+                    "description": "Sliot\u00e1n c\u00f3id chun c\u00f3d a ghlanadh uaidh.",
+                    "name": "Sliot\u00e1n c\u00f3id"
+                }
+            },
+            "name": "Glan an glas \u00fas\u00e1ideora"
+        },
+        "disable_lock_user_code": {
+            "description": "D\u00edchumasa\u00edonn s\u00e9 c\u00f3d \u00fas\u00e1ideora ar ghlas.",
+            "fields": {
+                "code_slot": {
+                    "description": "Sliot\u00e1n c\u00f3id le d\u00edchumas\u00fa.",
+                    "name": "Sliot\u00e1n c\u00f3id"
+                }
+            },
+            "name": "D\u00edchumasaigh an t-\u00fas\u00e1ideoir glas\u00e1la"
+        },
+        "enable_lock_user_code": {
+            "description": "Cumasa\u00edonn s\u00e9 c\u00f3d \u00fas\u00e1ideora ar ghlas.",
+            "fields": {
+                "code_slot": {
+                    "description": "Sliot\u00e1n c\u00f3id le cumas\u00fa.",
+                    "name": "Sliot\u00e1n c\u00f3id"
+                }
+            },
+            "name": "Cumasaigh an t-\u00fas\u00e1ideoir glas\u00e1la"
+        },
         "issue_zigbee_cluster_command": {
+            "description": "Eis\u00edonn s\u00e9 ord\u00fa ar an mbraisle sonraithe ar an eintiteas sonraithe.",
             "fields": {
+                "args": {
+                    "description": "Arg\u00f3int\u00ed le seoladh chuig an ord\u00fa.",
+                    "name": "Arg\u00f3int\u00ed"
+                },
+                "cluster_id": {
+                    "description": "Braisle ZCL chun tr\u00e9ithe a aisghabh\u00e1il d\u00f3.",
+                    "name": "ID Braisle"
+                },
                 "cluster_type": {
                     "description": "Cine\u00e1l an chnuasaigh.",
                     "name": "Cine\u00e1l braisle"
@@ -1472,7 +1577,8 @@
                     "name": "ID cr\u00edochphointe"
                 },
                 "ieee": {
-                    "description": "Seoladh IEEE don fheiste."
+                    "description": "Seoladh IEEE don fheiste.",
+                    "name": "IEEE"
                 },
                 "manufacturer": {
                     "description": "C\u00f3d an mhonar\u00f3ra. \u00das\u00e1id luach \"-1\" chun gan aon ch\u00f3d a shocr\u00fa.",
@@ -1489,6 +1595,7 @@
             "description": "Eis\u00edonn s\u00e9 ord\u00fa ar an mbraisle sonraithe ar an ngr\u00fapa sonraithe.",
             "fields": {
                 "args": {
+                    "description": "Arg\u00f3int\u00ed le seoladh chuig an ord\u00fa.",
                     "name": "Args"
                 },
                 "cluster_id": {
@@ -1515,11 +1622,45 @@
             "name": "Eisigh ord\u00fa gr\u00fapa Zigbee"
         },
         "permit": {
-            "description": "Ceada\u00edonn s\u00e9 do n\u00f3id dul isteach sa l\u00edonra Zigbee."
+            "description": "Ceada\u00edonn s\u00e9 do n\u00f3id dul isteach sa l\u00edonra Zigbee.",
+            "fields": {
+                "duration": {
+                    "description": "Am chun cead a thabhairt do chomhph\u00e1irtithe.",
+                    "name": "Fad"
+                },
+                "ieee": {
+                    "description": "Seoladh IEEE an n\u00f3id a cheada\u00edonn tionlacan nua.",
+                    "name": "IEEE"
+                },
+                "install_code": {
+                    "description": "C\u00f3d suite\u00e1la an fheiste cheangail (n\u00ed m\u00f3r \u00e9 a chomhcheangal leis an r\u00e9imse 'Foinse IEEE').",
+                    "name": "C\u00f3d suite\u00e1la"
+                },
+                "qr_code": {
+                    "description": "Sol\u00e1thra\u00edonn s\u00e9 an seoladh IEEE agus an c\u00f3d suite\u00e1la don ghl\u00e9as ceangail araon (difri\u00fail idir dh\u00edolt\u00f3ir\u00ed).",
+                    "name": "C\u00f3d QR"
+                },
+                "source_ieee": {
+                    "description": "Seoladh IEEE an fheiste at\u00e1 ag teacht le ch\u00e9ile (n\u00ed m\u00f3r \u00e9 a chomhcheangal leis an r\u00e9imse 'C\u00f3d suite\u00e1la').",
+                    "name": "Foinse IEEE"
+                }
+            },
+            "name": "Cead"
+        },
+        "set_lock_user_code": {
+            "fields": {
+                "user_code": {
+                    "description": "C\u00f3d le socr\u00fa.",
+                    "name": "C\u00f3d"
+                }
+            },
+            "name": "Socraigh c\u00f3d \u00fas\u00e1ideora glas\u00e1la"
         },
         "set_zigbee_cluster_attribute": {
+            "description": "Socra\u00edonn s\u00e9 luach tr\u00e9ith don chnuasach sonraithe ar an eintiteas sonraithe.",
             "fields": {
                 "attribute": {
+                    "description": "ID an tr\u00e9ith at\u00e1 le socr\u00fa.",
                     "name": "Tr\u00e9ith"
                 },
                 "cluster_id": {
@@ -1535,7 +1676,8 @@
                     "name": "ID cr\u00edochphointe"
                 },
                 "ieee": {
-                    "description": "Seoladh IEEE don fheiste."
+                    "description": "Seoladh IEEE don fheiste.",
+                    "name": "IEEE"
                 },
                 "manufacturer": {
                     "description": "C\u00f3d an mhonar\u00f3ra. \u00das\u00e1id luach \"-1\" chun gan aon ch\u00f3d a shocr\u00fa.",
@@ -1552,14 +1694,16 @@
             "description": "\u00das\u00e1ideann an gn\u00edomh seo cumais an WD chun cuisle inchloiste/infheicthe tapa ar a dtugtar \"squawk\" a scaoileadh. N\u00edl aon \u00e9ifeacht ag an ord\u00fa squawk m\u00e1 t\u00e1 an WD gn\u00edomhach faoi l\u00e1thair (rabhadh ar si\u00fal).",
             "fields": {
                 "ieee": {
-                    "description": "Seoladh IEEE don fheiste."
+                    "description": "Seoladh IEEE don fheiste.",
+                    "name": "IEEE"
                 },
                 "level": {
                     "description": "\u00das\u00e1idtear an r\u00e9imse leibh\u00e9al screada\u00edl mar \u00e1ireamh 2-giot\u00e1n, agus cinneann s\u00e9 d\u00e9ine an fhuaim screada\u00edl inchloiste mar a thaispe\u00e1ntar i dT\u00e1bla 8-26 den tsonra\u00edocht ZCL - Luachanna R\u00e9imse Leibh\u00e9al Screada\u00edl.",
                     "name": "Leibh\u00e9al"
                 },
                 "mode": {
-                    "description": "\u00das\u00e1idtear an r\u00e9imse M\u00f3d Squawk mar \u00e1ireamh 4-giot\u00e1n, agus is f\u00e9idir go mbeadh ceann de na luachanna a thaispe\u00e1ntar i dT\u00e1bla 8-24 den tsonra\u00edocht ZCL - R\u00e9imse M\u00f3d Squawk ann. Braitheann oibri\u00fa cruinn gach m\u00f3d (conas a dh\u00e9anann an WD \u201csquawks\u201d) ar an gcur i bhfeidhm."
+                    "description": "\u00das\u00e1idtear an r\u00e9imse M\u00f3d Squawk mar \u00e1ireamh 4-giot\u00e1n, agus is f\u00e9idir go mbeadh ceann de na luachanna a thaispe\u00e1ntar i dT\u00e1bla 8-24 den tsonra\u00edocht ZCL - R\u00e9imse M\u00f3d Squawk ann. Braitheann oibri\u00fa cruinn gach m\u00f3d (conas a dh\u00e9anann an WD \u201csquawks\u201d) ar an gcur i bhfeidhm.",
+                    "name": "M\u00f3d"
                 },
                 "strobe": {
                     "description": "\u00das\u00e1idtear an r\u00e9imse strobe mar Boole\u00e1nach, agus cinneann s\u00e9 an bhfuil an t\u00e1sc amhairc ag teast\u00e1il chomh maith leis an screada\u00edl inchloiste, mar a thaispe\u00e1ntar i dT\u00e1bla 8-25 den tsonra\u00edocht ZCL - Giot\u00e1n Strobe.",
@@ -1580,9 +1724,27 @@
                     "name": "Timthriall dualgais"
                 },
                 "ieee": {
-                    "description": "Seoladh IEEE don fheiste."
+                    "description": "Seoladh IEEE don fheiste.",
+                    "name": "IEEE"
+                },
+                "intensity": {
+                    "description": "L\u00e9ir\u00edonn s\u00e9 d\u00e9ine an stroib mar a thaispe\u00e1ntar i dT\u00e1bla 8-23 den tsonra\u00edocht ZCL. T\u00e1 an tr\u00e9ith seo deartha chun aschur an stroib (i.e., gile) a athr\u00fa agus n\u00ed a mhinic\u00edocht, at\u00e1 mionsonraithe i roinn 8.4.2.3.1.6 den tsonra\u00edocht ZCL.",
+                    "name": "D\u00e9ine"
+                },
+                "level": {
+                    "description": "\u00das\u00e1idtear an r\u00e9imse Leibh\u00e9al Sir\u00e9ine mar \u00e1ireamh 2-giot\u00e1n, agus l\u00e9ir\u00edonn s\u00e9 d\u00e9ine an fhuaim screada\u00edl inchloiste mar a thaispe\u00e1ntar i dT\u00e1bla 8-22 den tsonra\u00edocht ZCL.",
+                    "name": "Leibh\u00e9al"
+                },
+                "mode": {
+                    "description": "\u00das\u00e1idtear an r\u00e9imse M\u00f3d Rabhaidh mar \u00e1ireamh 4-giot\u00e1n, agus is f\u00e9idir ceann de na luachanna 0-6 a shainmh\u00edn\u00edtear th\u00edos i dt\u00e1bla 8-20 den tsonra\u00edocht ZCL a bheith aige. T\u00e1 iompar cruinn na feiste rabhaidh i ngach m\u00f3d de r\u00e9ir na gcaighde\u00e1n sl\u00e1nd\u00e1la \u00e1bhartha.",
+                    "name": "M\u00f3d"
+                },
+                "strobe": {
+                    "description": "\u00das\u00e1idtear an r\u00e9imse Strob mar uimhri\u00fa 2-giot\u00e1n, agus cinneann s\u00e9 an bhfuil an t\u00e1sc amhairc ag teast\u00e1il sa bhreis ar an sirean inchloiste, mar a l\u00e9ir\u00edtear i dT\u00e1bla 8-21 den tsonra\u00edocht ZCL. Cialla\u00edonn \"0\" gan strob, cialla\u00edonn \"1\" strob. M\u00e1s \u00e9 \"1\" an r\u00e9imse strob agus m\u00e1s \u00e9 \"0\" (\"Stop\") an M\u00f3d Rabhaidh, n\u00ed ghn\u00edomha\u00edtear ach an strob.",
+                    "name": "Strob"
                 }
-            }
+            },
+            "name": "Tosa\u00edonn gl\u00e9as rabhaidh fol\u00e1ireamh"
         }
     }
 }

homeassistant/components/zha/translations/lt.json

@@ -2,9 +2,9 @@
     "config": {
         "abort": {
             "invalid_zeroconf_data": "Koordinatorius turi neteising\u0105 Zeroconf paslaugos informacij\u0105 ir ZHA negali jo identifikuoti",
-            "not_zha_device": "\u0160is \u012frenginys n\u0117ra ZHA \u012frenginys",
+            "not_zha_device": "\u0160is prietaisas n\u0117ra ZHA prietaisas",
             "single_instance_allowed": "Jau sukonfig\u016bruota. Galima tik viena konfig\u016bracija.",
-            "usb_probe_failed": "Nepavyko patikrinti USB \u012frenginio",
+            "usb_probe_failed": "Nepavyko patikrinti USB prietaiso",
             "wrong_firmware_installed": "J\u016bs\u0173 prietaise veikia netinkama programin\u0117-technin\u0117 \u012franga ir jo negalima naudoti su ZHA, kol ne\u012fdiegta tinkama programin\u0117-technin\u0117 \u012franga. [Sukurtas remontas]({repair_url}) su daugiau informacijos ir instrukcijomis, kaip tai i\u0161spr\u0119sti."
         },
         "error": {
@@ -33,7 +33,7 @@
             },
             "choose_serial_port": {
                 "data": {
-                    "path": "Serijinio \u012frenginio kelias"
+                    "path": "Serijinio prietaiso kelias"
                 },
                 "description": "Pasirinkite savo \u201eZigbee\u201c radijo nuosekl\u0173j\u012f prievad\u0105",
                 "title": "Pasirinkite nuosekl\u0173j\u012f prievad\u0105"
@@ -88,15 +88,15 @@
             "title": "Signalizacijos valdymo pulto parinktys"
         },
         "zha_options": {
-            "consider_unavailable_battery": "Laikyti baterijomis maitinamus \u012frenginius nepasiekiamais po (sekund\u017ei\u0173)",
-            "consider_unavailable_mains": "Laikyti, kad i\u0161 elektros tinklo maitinami \u012frenginiai nepasiekiami po (sekund\u017ei\u0173)",
+            "consider_unavailable_battery": "Laikyti baterijomis maitinamus prietaisus nepasiekiamais po (sekund\u017ei\u0173)",
+            "consider_unavailable_mains": "Laikyti i\u0161 elektros tinklo maitinamus prietaisus nepasiekiamus po (sekund\u017ei\u0173)",
             "default_light_transition": "Numatytasis \u0161viesos per\u0117jimo laikas (sekund\u0117mis)",
             "enable_identify_on_join": "\u012egalinti identifikavimo efekt\u0105, kai prietaisai prisijungia prie tinklo",
-            "enable_mains_startup_polling": "Atnaujinti \u012frengini\u0173, maitinam\u0173 i\u0161 elektros tinklo, b\u016bsen\u0105 paleidimo metu",
+            "enable_mains_startup_polling": "Atnaujinti prietais\u0173, maitinam\u0173 i\u0161 elektros tinklo, b\u016bsen\u0105 paleidimo metu",
             "enhanced_light_transition": "\u012egalinti patobulint\u0105 \u0161viesos spalvos/temperat\u016bros per\u0117jim\u0105 i\u0161 i\u0161jungtos b\u016bsenos",
             "group_members_assume_state": "Grup\u0117s nariai perima grup\u0117s b\u016bsen\u0105",
-            "light_transitioning_flag": "\u012egalinti padidinto ry\u0161kumo slankikl\u012f \u0161viesos per\u0117jimo metu",
-            "title": "Pasaulin\u0117s galimyb\u0117s"
+            "light_transitioning_flag": "\u012egalinti pagerint\u0105 ry\u0161kumo slankikl\u012f \u0161viesos per\u0117jimo metu",
+            "title": "Visuotiniai nustatymai"
         }
     },
     "device_automation": {
@@ -277,7 +277,7 @@
                 "name": "Suvestin\u0117 i\u0161 naujo pateikta"
             },
             "restart_device": {
-                "name": "I\u0161 naujo paleiskite \u012frengin\u012f"
+                "name": "I\u0161 naujo paleisti prietais\u0105"
             },
             "self_test": {
                 "name": "Sav\u0119s i\u0161bandymas"
@@ -876,7 +876,7 @@
                 "name": "Aptikimo jautrumas"
             },
             "device_mode": {
-                "name": "\u012erenginio re\u017eimas"
+                "name": "Prietaiso re\u017eimas"
             },
             "display_brightness": {
                 "name": "Ekrano ry\u0161kumas"
@@ -1100,7 +1100,7 @@
                 "name": "Prietaiso veikimo laikas"
             },
             "device_status": {
-                "name": "\u012erenginio b\u016bsena"
+                "name": "Prietaiso b\u016bsena"
             },
             "device_temperature": {
                 "name": "Prietaiso temperat\u016bra"
@@ -1693,9 +1693,9 @@
     },
     "options": {
         "abort": {
-            "not_zha_device": "\u0160is \u012frenginys n\u0117ra ZHA \u012frenginys",
+            "not_zha_device": "\u0160is prietaisas n\u0117ra ZHA prietaisas",
             "single_instance_allowed": "Jau sukonfig\u016bruota. Galima tik viena konfig\u016bracija.",
-            "usb_probe_failed": "Nepavyko patikrinti USB \u012frenginio",
+            "usb_probe_failed": "Nepavyko patikrinti USB prietaiso",
             "wrong_firmware_installed": "J\u016bs\u0173 prietaise veikia netinkama programin\u0117-technin\u0117 \u012franga ir jo negalima naudoti su ZHA, kol ne\u012fdiegta tinkama programin\u0117-technin\u0117 \u012franga. [Sukurtas remontas]({repair_url}) su daugiau informacijos ir instrukcijomis, kaip tai i\u0161spr\u0119sti."
         },
         "error": {
@@ -1724,7 +1724,7 @@
             },
             "choose_serial_port": {
                 "data": {
-                    "path": "Serijinio \u012frenginio kelias"
+                    "path": "Serijinio prietaiso kelias"
                 },
                 "description": "Pasirinkite savo \u201eZigbee\u201c radijo nuosekl\u0173j\u012f prievad\u0105",
                 "title": "Pasirinkite nuosekl\u0173j\u012f prievad\u0105"
@@ -1900,22 +1900,22 @@
                     "name": "IEEE"
                 },
                 "install_code": {
-                    "description": "\u012ediekite sujungimo \u012frenginio kod\u0105 (turi b\u016bti sujungtas su laukeliu 'Source IEEE').",
-                    "name": "\u012ediegti kod\u0105"
+                    "description": "Prisijun\u010dian\u010dio prietaiso \u012fdiegimo kodas (turi b\u016bti naudojamas kartu su \u201eIEEE adresas\u201c).",
+                    "name": "\u012ediegimo kodas"
                 },
                 "qr_code": {
-                    "description": "Pateikiamas ir IEEE adresas, ir prisijungimo \u012frenginio diegimo kodas (tiek\u0117jai skiriasi).",
+                    "description": "Pateikia ir IEEE adres\u0105, ir prisijun\u010dian\u010dio prietaiso diegimo kod\u0105 (skiriasi tarp tiek\u0117j\u0173).",
                     "name": "QR kodas"
                 },
                 "source_ieee": {
-                    "description": "Jungiamojo \u012frenginio IEEE adresas (turi b\u016bti sujungtas su laukeliu '\u012ediegti kod\u0105').",
-                    "name": "\u0160altinis IEEE"
+                    "description": "Prisijun\u010dian\u010dio prietaiso IEEE adresas (turi b\u016bti naudojamas kartu su \u201e\u012ediegimo kodas\u201c).",
+                    "name": "IEEE adresas"
                 }
             },
             "name": "Leidimas"
         },
         "reconfigure_device": {
-            "description": "I\u0161 naujo sukonfig\u016bruoja ZHA \u012frengin\u012f (gydymo \u012frengin\u012f). Naudokite tai, jei kyla problem\u0173 d\u0117l \u012frenginio. Jei aptariamas \u012frenginys yra baterija maitinamas \u012frenginys, atlikdami \u0161\u012f veiksm\u0105 \u012fsitikinkite, kad jis yra budrus ir priima komandas.",
+            "description": "I\u0161 naujo sukonfig\u016bruoja ZHA prietais\u0105 (gydo prietais\u0105). Naudokite tai, jei kyla problem\u0173 d\u0117l prietaiso. Jei aptariamas prietaisas yra maitinamas baterijomis, atlikdami \u0161\u012f veiksm\u0105 \u012fsitikinkite, kad jis yra budrus ir priima komandas.",
             "fields": {
                 "ieee": {
                     "description": "Prietaiso, kur\u012f reikia konfig\u016bruoti, IEEE adresas.",

homeassistant/components/zimi/manifest.json

@@ -6,5 +6,5 @@
   "documentation": "https://www.home-assistant.io/integrations/zimi",
   "iot_class": "local_push",
   "quality_scale": "bronze",
-  "requirements": ["zcc-helper==3.5.2"]
+  "requirements": ["zcc-helper==3.6"]
 }

homeassistant/components/zimi/translations/ga.json

@@ -1,10 +1,21 @@
 {
     "config": {
+        "abort": {
+            "already_configured": "T\u00e1 an gl\u00e9as cumraithe cheana f\u00e9in"
+        },
         "error": {
-            "connection_refused": "Di\u00falta\u00edodh an nasc"
+            "cannot_connect": "Theip ar an nascadh",
+            "connection_refused": "Di\u00falta\u00edodh an nasc",
+            "invalid_host": "Ainm \u00f3stach n\u00f3 seoladh IP neamhbhail\u00ed",
+            "timeout": "Am cr\u00edochnaithe ag bun\u00fa nasc",
+            "unknown": "Earr\u00e1id gan choinne"
         },
         "step": {
             "manual": {
+                "data": {
+                    "host": "\u00d3stach",
+                    "port": "Port"
+                },
                 "data_description": {
                     "host": "\u00c9igeantach - seoladh IP ZCC.",
                     "port": "\u00c9igeantach - uimhir phoirt ZCC (r\u00e9amhshocraithe=5003)."
@@ -14,6 +25,8 @@
             },
             "selection": {
                 "data": {
+                    "host": "\u00d3stach",
+                    "port": "Port",
                     "selected_host_and_port": "ZCC Roghnaithe"
                 },
                 "data_description": {

homeassistant/components/zwave_js/config_flow.py

@@ -35,6 +35,7 @@ from homeassistant.const import CONF_NAME, CONF_URL
 from homeassistant.core import HomeAssistant, callback
 from homeassistant.data_entry_flow import AbortFlow
 from homeassistant.exceptions import HomeAssistantError
+from homeassistant.helpers import selector
 from homeassistant.helpers.hassio import is_hassio
 from homeassistant.helpers.service_info.hassio import HassioServiceInfo
 from homeassistant.helpers.service_info.usb import UsbServiceInfo
@@ -88,6 +89,8 @@ ADDON_USER_INPUT_MAP = {
     CONF_ADDON_LR_S2_AUTHENTICATED_KEY: CONF_LR_S2_AUTHENTICATED_KEY,
 }
 
+CONF_ADDON_RF_REGION = "rf_region"
+
 EXAMPLE_SERVER_URL = "ws://localhost:3000"
 ON_SUPERVISOR_SCHEMA = vol.Schema({vol.Optional(CONF_USE_ADDON, default=True): bool})
 MIN_MIGRATION_SDK_VERSION = AwesomeVersion("6.61")
@@ -103,6 +106,19 @@ ZWAVE_JS_UI_MIGRATION_INSTRUCTIONS = (
     "#how-to-migrate-from-one-adapter-to-a-new-adapter-using-z-wave-js-ui"
 )
 
+RF_REGIONS = [
+    "Australia/New Zealand",
+    "China",
+    "Europe",
+    "Hong Kong",
+    "India",
+    "Israel",
+    "Japan",
+    "Korea",
+    "Russia",
+    "USA",
+]
+
 
 def get_manual_schema(user_input: dict[str, Any]) -> vol.Schema:
     """Return a schema for the manual step."""
@@ -195,10 +211,12 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
         self.backup_data: bytes | None = None
         self.backup_filepath: Path | None = None
         self.use_addon = False
+        self._addon_config_updates: dict[str, Any] = {}
         self._migrating = False
         self._reconfigure_config_entry: ZwaveJSConfigEntry | None = None
         self._usb_discovery = False
         self._recommended_install = False
+        self._rf_region: str | None = None
 
     async def async_step_install_addon(
         self, user_input: dict[str, Any] | None = None
@@ -236,6 +254,21 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
         self, user_input: dict[str, Any] | None = None
     ) -> ConfigFlowResult:
         """Start Z-Wave JS add-on."""
+        if self.hass.config.country is None and (
+            not self._rf_region or self._rf_region == "Automatic"
+        ):
+            # If the country is not set, we need to check the RF region add-on config.
+            addon_info = await self._async_get_addon_info()
+            rf_region: str | None = addon_info.options.get(CONF_ADDON_RF_REGION)
+            self._rf_region = rf_region
+            if rf_region is None or rf_region == "Automatic":
+                # If the RF region is not set, we need to ask the user to select it.
+                return await self.async_step_rf_region()
+        if config_updates := self._addon_config_updates:
+            # If we have updates to the add-on config, set them before starting the add-on.
+            self._addon_config_updates = {}
+            await self._async_set_addon_config(config_updates)
+
         if not self.start_task:
             self.start_task = self.hass.async_create_task(self._async_start_addon())
 
@@ -629,6 +662,33 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
             return await self.async_step_on_supervisor({CONF_USE_ADDON: True})
         return await self.async_step_on_supervisor()
 
+    async def async_step_rf_region(
+        self, user_input: dict[str, Any] | None = None
+    ) -> ConfigFlowResult:
+        """Handle RF region selection step."""
+        if user_input is not None:
+            # Store the selected RF region
+            self._addon_config_updates[CONF_ADDON_RF_REGION] = self._rf_region = (
+                user_input["rf_region"]
+            )
+            return await self.async_step_start_addon()
+
+        schema = vol.Schema(
+            {
+                vol.Required("rf_region"): selector.SelectSelector(
+                    selector.SelectSelectorConfig(
+                        options=RF_REGIONS,
+                        mode=selector.SelectSelectorMode.DROPDOWN,
+                    )
+                ),
+            }
+        )
+
+        return self.async_show_form(
+            step_id="rf_region",
+            data_schema=schema,
+        )
+
     async def async_step_on_supervisor(
         self, user_input: dict[str, Any] | None = None
     ) -> ConfigFlowResult:
@@ -728,7 +788,7 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
                     CONF_ADDON_LR_S2_AUTHENTICATED_KEY: self.lr_s2_authenticated_key,
                 }
 
-                await self._async_set_addon_config(addon_config_updates)
+                self._addon_config_updates = addon_config_updates
                 return await self.async_step_start_addon()
 
             # Network already exists, go to security keys step
@@ -799,7 +859,7 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
                 CONF_ADDON_LR_S2_AUTHENTICATED_KEY: self.lr_s2_authenticated_key,
             }
 
-            await self._async_set_addon_config(addon_config_updates)
+            self._addon_config_updates = addon_config_updates
             return await self.async_step_start_addon()
 
         data_schema = vol.Schema(
@@ -1004,7 +1064,7 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
         if user_input is not None:
             if self.usb_path:
                 # USB discovery was used, so the device is already known.
-                await self._async_set_addon_config({CONF_ADDON_DEVICE: self.usb_path})
+                self._addon_config_updates[CONF_ADDON_DEVICE] = self.usb_path
                 return await self.async_step_start_addon()
             # Now that the old controller is gone, we can scan for serial ports again
             return await self.async_step_choose_serial_port()
@@ -1136,6 +1196,8 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
                 CONF_ADDON_LR_S2_AUTHENTICATED_KEY: self.lr_s2_authenticated_key,
             }
 
+            addon_config_updates = self._addon_config_updates | addon_config_updates
+            self._addon_config_updates = {}
             await self._async_set_addon_config(addon_config_updates)
 
             if addon_info.state == AddonState.RUNNING and not self.restart_addon:
@@ -1207,7 +1269,7 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
         """Choose a serial port."""
         if user_input is not None:
             self.usb_path = user_input[CONF_USB_PATH]
-            await self._async_set_addon_config({CONF_ADDON_DEVICE: self.usb_path})
+            self._addon_config_updates[CONF_ADDON_DEVICE] = self.usb_path
             return await self.async_step_start_addon()
 
         try: