homeassistant 2025.7.3__py3-none-any.whl → 2025.8.0b0__py3-none-any.whl

homeassistant/components/mqtt/translations/en.json

@@ -114,6 +114,7 @@
                 "cover_tilt_command_template_must_be_used_with_tilt_command_topic": "The tilt command template must be used with the tilt command topic",
                 "cover_tilt_status_template_must_be_used_with_tilt_status_topic": "The tilt value template must be used with the tilt status topic",
                 "cover_value_template_must_be_used_with_state_topic": "The value template must be used with the state topic option",
+                "empty_list_not_allowed": "Empty list is not allowed. Add at least one item",
                 "fan_preset_mode_reset_in_preset_modes_list": "Payload \"reset preset mode\" is not a valid as a preset mode",
                 "fan_speed_range_max_must_be_greater_than_speed_range_min": "Speed range max must be greater than speed range min",
                 "invalid_input": "Invalid value",
@@ -124,10 +125,13 @@
                 "invalid_uom_for_state_class": "The unit of measurement \"{unit_of_measurement}\" is not supported by the selected state class, please either remove the state class, select a state class which supports \"{unit_of_measurement}\", or pick a supported unit of measurement from the list",
                 "invalid_url": "Invalid URL",
                 "last_reset_not_with_state_class_total": "The last reset value template option should be used with state class 'Total' only",
+                "max_below_min_humidity": "Max humidity value should be greater than min humidity value",
                 "max_below_min_kelvin": "Max Kelvin value should be greater than min Kelvin value",
+                "max_below_min_temperature": "Max temperature value should be greater than min temperature value",
                 "options_device_class_enum": "The 'Options' setting must be used with the Enumeration device class. If you continue, the existing options will be reset",
                 "options_not_allowed_with_state_class_or_uom": "The 'Options' setting is not allowed when state class or unit of measurement are used",
                 "options_with_enum_device_class": "Configure options for the enumeration sensor",
+                "preset_mode_none_not_allowed": "Preset \"none\" is not a valid preset mode",
                 "uom_required_for_device_class": "The selected device class requires a unit"
             },
             "initiate_flow": {
@@ -148,7 +152,7 @@
                         "payload_available": "The payload that indicates the device is available (defaults to 'online')",
                         "payload_not_available": "The payload that indicates the device is not available (defaults to 'offline')"
                     },
-                    "description": "The availability feature allows a device to report it's availability.",
+                    "description": "The availability feature allows a device to report its availability.",
                     "title": "Availability options"
                 },
                 "delete_entity": {
@@ -215,6 +219,16 @@
                 },
                 "entity_platform_config": {
                     "data": {
+                        "climate_feature_action": "Current action support",
+                        "climate_feature_current_humidity": "Current humidity support",
+                        "climate_feature_current_temperature": "Current temperature support",
+                        "climate_feature_fan_modes": "Fan mode support",
+                        "climate_feature_power": "Power on/off support",
+                        "climate_feature_preset_modes": "Preset modes support",
+                        "climate_feature_swing_horizontal_modes": "Horizontal swing mode support",
+                        "climate_feature_swing_modes": "Swing mode support",
+                        "climate_feature_target_humidity": "Target humidity support",
+                        "climate_feature_target_temperature": "Target temperature support",
                         "device_class": "Device class",
                         "entity_category": "Entity category",
                         "fan_feature_direction": "Direction support",
@@ -225,9 +239,20 @@
                         "schema": "Schema",
                         "state_class": "State class",
                         "suggested_display_precision": "Suggested display precision",
+                        "temperature_unit": "Temperature unit",
                         "unit_of_measurement": "Unit of measurement"
                     },
                     "data_description": {
+                        "climate_feature_action": "The climate supports reporting the current action.",
+                        "climate_feature_current_humidity": "The climate supports reporting the current humidity.",
+                        "climate_feature_current_temperature": "The climate supports reporting the current temperature.",
+                        "climate_feature_fan_modes": "The climate supports fan modes.",
+                        "climate_feature_power": "The climate supports the power \"on\" and \"off\" commands.",
+                        "climate_feature_preset_modes": "The climate supports preset modes.",
+                        "climate_feature_swing_horizontal_modes": "The climate supports horizontal swing modes.",
+                        "climate_feature_swing_modes": "The climate supports swing modes.",
+                        "climate_feature_target_humidity": "The climate supports setting the target humidity.",
+                        "climate_feature_target_temperature": "The climate supports setting the target temperature.",
                         "device_class": "The device class of the {platform} entity. [Learn more.]({url}#device_class)",
                         "entity_category": "Allows marking an entity as device configuration or diagnostics. An entity with a category will not be exposed to cloud, Alexa, or Google Assistant components, nor included in indirect action calls to devices or areas. Sensor entities cannot be assigned a device configuration class. [Learn more.](https://developers.home-assistant.io/docs/core/entity/#registry-properties)",
                         "fan_feature_direction": "The fan supports direction.",
@@ -238,6 +263,7 @@
                         "schema": "The schema to use. [Learn more.]({url}#comparison-of-light-mqtt-schemas)",
                         "state_class": "The [State class](https://developers.home-assistant.io/docs/core/entity/sensor/#available-state-classes) of the sensor. [Learn more.]({url}#state_class)",
                         "suggested_display_precision": "The number of decimals which should be used in the {platform} entity state after rounding. [Learn more.]({url}#suggested_display_precision)",
+                        "temperature_unit": "This determines the native unit of measurement the MQTT climate device works with.",
                         "unit_of_measurement": "Defines the unit of measurement of the sensor, if any."
                     },
                     "description": "Please configure specific details for {platform} entity \"{entity}\":",
@@ -254,6 +280,36 @@
                     },
                     "title": "Configure MQTT device \"{mqtt_device}\""
                 },
+                "export": {
+                    "description": "An export allows you to migrate the MQTT device configuration to YAML-based configuration or MQTT discovery. The configuration export can also be helpful for troubleshooting.",
+                    "menu_options": {
+                        "export_discovery": "Export MQTT discovery information",
+                        "export_yaml": "Export to YAML configuration"
+                    },
+                    "title": "Export MQTT device config"
+                },
+                "export_discovery": {
+                    "data": {
+                        "discovery_payload": "Discovery payload:",
+                        "discovery_topic": "Discovery topic"
+                    },
+                    "data_description": {
+                        "discovery_payload": "The JSON [discovery payload]({url}#device-discovery-payload) that contains information about the MQTT device.",
+                        "discovery_topic": "The [discovery topic]({url}#discovery-topic) to publish the discovery payload, used to trigger MQTT discovery. An empty payload published to this topic will remove the device and discovered entities."
+                    },
+                    "description": "To allow setup via MQTT [discovery]({url}#device-discovery-payload), the discovery payload needs to be published to the discovery topic. Copy the information from the fields below. Home Assistant will detect if the setup of the MQTT device was tried via MQTT discovery instead, and will offer a repair flow to clean up the redundant subentry. You can also choose to change the identifiers if you do not want to remove the subentry.",
+                    "title": "Export MQTT device config"
+                },
+                "export_yaml": {
+                    "data": {
+                        "yaml": "Copy the YAML configuration below:"
+                    },
+                    "data_description": {
+                        "yaml": "Place YAML configuration in your [configuration.yaml]({url}#yaml-configuration-listed-per-item)."
+                    },
+                    "description": "You can copy the configuration below and place it your configuration.yaml file. Home Assistant will detect if the setup of the MQTT device was tried via YAML instead, and will offer a repair flow to clean up the redundant subentry. You can also choose to change the identifiers if you do not want to remove the subentry.",
+                    "title": "Export MQTT device config"
+                },
                 "mqtt_platform_config": {
                     "data": {
                         "blue_template": "Blue template",
@@ -266,6 +322,11 @@
                         "force_update": "Force update",
                         "green_template": "Green template",
                         "last_reset_value_template": "Last reset value template",
+                        "mode_command_template": "Operation mode command template",
+                        "mode_command_topic": "Operation mode command topic",
+                        "mode_state_template": "Operation mode value template",
+                        "mode_state_topic": "Operation mode state topic",
+                        "modes": "Supported operation modes",
                         "on_command_type": "ON command type",
                         "optimistic": "Optimistic",
                         "payload_off": "Payload \"off\"",
@@ -293,6 +354,11 @@
                         "force_update": "Sends update events even if the value hasn\u2019t changed. Useful if you want to have meaningful value graphs in history. [Learn more.]({url}#force_update)",
                         "green_template": "[Template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract green color from the state payload value. Expected result of the template is an integer from 0-255 range.",
                         "last_reset_value_template": "Defines a [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract the last reset. When Last reset template is set, the State class option must be Total. [Learn more.]({url}#last_reset_value_template)",
+                        "mode_command_template": "[Template](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) to define the operation mode to be sent to the operation mode command topic. [Learn more.]({url}#mode_command_template)",
+                        "mode_command_topic": "The MQTT topic to publish commands to change the climate operation mode. [Learn more.]({url}#mode_command_topic)",
+                        "mode_state_template": "Defines a [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract the operation mode state. [Learn more.]({url}#mode_state_template)",
+                        "mode_state_topic": "The MQTT topic subscribed to receive operation mode state messages. [Learn more.]({url}#mode_state_topic)",
+                        "modes": "A list of supported operation modes. [Learn more.]({url}#modes)",
                         "on_command_type": "Defines when the payload \"on\" is sent. Using \"Last\" (the default) will send any style (brightness, color, etc) topics first and then a payload \"on\" to the command topic. Using \"First\" will send the payload \"on\" and then any style topics. Using \"Brightness\" will only send brightness commands instead of the payload \"on\" to turn the light on.",
                         "optimistic": "Flag that defines if the {platform} entity works in optimistic mode. [Learn more.]({url}#optimistic)",
                         "payload_off": "The payload that represents the \"off\" state.",
@@ -333,6 +399,100 @@
                             },
                             "name": "Advanced settings"
                         },
+                        "climate_action_settings": {
+                            "data": {
+                                "action_template": "Action template",
+                                "action_topic": "Action topic"
+                            },
+                            "data_description": {
+                                "action_template": "A [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to render the value received on the action topic with.",
+                                "action_topic": "The MQTT topic to subscribe for changes of the current action. If this is set, the climate graph uses the value received as data source. A \"None\" payload resets the current action state. An empty payload is ignored. Valid action values are: \"off\", \"heating\", \"cooling\", \"drying\", \"idle\" and \"fan\".  [Learn more.]({url}#action_topic)"
+                            },
+                            "name": "Current action settings"
+                        },
+                        "climate_fan_mode_settings": {
+                            "data": {
+                                "fan_mode_command_template": "Fan mode command template",
+                                "fan_mode_command_topic": "Fan mode command topic",
+                                "fan_mode_state_template": "Fan mode state template",
+                                "fan_mode_state_topic": "Fan mode state topic",
+                                "fan_modes": "Fan modes"
+                            },
+                            "data_description": {
+                                "fan_mode_command_template": "A [template](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) to compose the payload to be published at the fan mode command topic.",
+                                "fan_mode_command_topic": "The MQTT topic to publish commands to change the climate fan mode. [Learn more.]({url}#fan_mode_command_topic)",
+                                "fan_mode_state_template": "Defines a [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract the climate fan mode value.",
+                                "fan_mode_state_topic": "The MQTT topic subscribed to receive the climate fan mode. [Learn more.]({url}#fan_mode_state_topic)",
+                                "fan_modes": "List of fan modes this climate is capable of running at. Common fan modes that offer translations are `off`, `on`, `auto`, `low`, `medium`, `high`, `middle`, `focus` and `diffuse`."
+                            },
+                            "name": "Fan mode settings"
+                        },
+                        "climate_power_settings": {
+                            "data": {
+                                "payload_off": "Payload \"off\"",
+                                "payload_on": "Payload \"on\"",
+                                "power_command_template": "Power command template",
+                                "power_command_topic": "Power command topic"
+                            },
+                            "data_description": {
+                                "payload_off": "The payload that represents the \"off\" state.",
+                                "payload_on": "The payload that represents the \"off\" state.",
+                                "power_command_template": "A [template](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) to compose the payload to be published at the power command topic. The `value` parameter is the payload set for payload \"on\" or payload \"off\".",
+                                "power_command_topic": "The MQTT topic to publish commands to change the climate power state. Sends the payload configured with payload \"on\" or payload \"off\". [Learn more.]({url}#power_command_topic)"
+                            },
+                            "name": "Power settings"
+                        },
+                        "climate_preset_mode_settings": {
+                            "data": {
+                                "preset_mode_command_template": "Preset mode command template",
+                                "preset_mode_command_topic": "Preset mode command topic",
+                                "preset_mode_state_topic": "Preset mode state topic",
+                                "preset_mode_value_template": "Preset mode value template",
+                                "preset_modes": "Preset modes"
+                            },
+                            "data_description": {
+                                "preset_mode_command_template": "A [template](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) to compose the payload to be published at the preset mode command topic.",
+                                "preset_mode_command_topic": "The MQTT topic to publish commands to change the climate preset mode. [Learn more.]({url}#preset_mode_command_topic)",
+                                "preset_mode_state_topic": "The MQTT topic subscribed to receive fan preset mode. [Learn more.]({url}#preset_mode_state_topic)",
+                                "preset_mode_value_template": "Defines a [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract fan preset mode value.",
+                                "preset_modes": "List of preset modes this climate is capable of running at. Common preset modes that offer translations are `none`, `away`, `eco`, `boost`, `comfort`, `home`, `sleep` and `activity`."
+                            },
+                            "name": "Preset mode settings"
+                        },
+                        "climate_swing_horizontal_mode_settings": {
+                            "data": {
+                                "swing_horizontal_mode_command_template": "Horizontal swing mode command template",
+                                "swing_horizontal_mode_command_topic": "Horizontal swing mode command topic",
+                                "swing_horizontal_mode_state_template": "Horizontal swing mode state template",
+                                "swing_horizontal_mode_state_topic": "Horizontal swing mode state topic",
+                                "swing_horizontal_modes": "Horizontal swing modes"
+                            },
+                            "data_description": {
+                                "swing_horizontal_mode_command_template": "A [template](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) to compose the payload to be published at the horizontal swing mode command topic.",
+                                "swing_horizontal_mode_command_topic": "The MQTT topic to publish commands to change the climate horizontal swing mode. [Learn more.]({url}#swing_horizontal_mode_command_topic)",
+                                "swing_horizontal_mode_state_template": "Defines a [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract the climate horizontal swing mode value.",
+                                "swing_horizontal_mode_state_topic": "The MQTT topic subscribed to receive the climate horizontal swing mode. [Learn more.]({url}#swing_horizontal_mode_state_topic)",
+                                "swing_horizontal_modes": "List of horizontal swing modes this climate is capable of running at. Common horizontal swing modes that offer translations are `off` and `on`."
+                            },
+                            "name": "Horizontal swing mode settings"
+                        },
+                        "climate_swing_mode_settings": {
+                            "data": {
+                                "swing_mode_command_template": "Swing mode command template",
+                                "swing_mode_command_topic": "Swing mode command topic",
+                                "swing_mode_state_template": "Swing mode state template",
+                                "swing_mode_state_topic": "Swing mode state topic",
+                                "swing_modes": "Swing modes"
+                            },
+                            "data_description": {
+                                "swing_mode_command_template": "A [template](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) to compose the payload to be published at the swing mode command topic.",
+                                "swing_mode_command_topic": "The MQTT topic to publish commands to change the climate swing mode. [Learn more.]({url}#swing_mode_command_topic)",
+                                "swing_mode_state_template": "Defines a [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract the climate swing mode value.",
+                                "swing_mode_state_topic": "The MQTT topic subscribed to receive the climate swing mode. [Learn more.]({url}#swing_mode_state_topic)",
+                                "swing_modes": "List of swing modes this climate is capable of running at. Common swing modes that offer translations are `off`, `on`, `vertical`, `horizontal` and `both`."
+                            },
+                            "name": "Swing mode settings"
+                        },
                         "cover_payload_settings": {
                             "data": {
                                 "payload_close": "Payload \"close\"",
@@ -396,12 +556,34 @@
                                 "tilt_max": "The maximum tilt value.",
                                 "tilt_min": "The minimum tilt value.",
                                 "tilt_opened_value": "The value that will be sent to the \"tilt command topic\" when the cover tilt is opened.",
-                                "tilt_optimistic": "Flag that defines if tilt works in optimistic mode. If tilt status topic is not defined, tilt works in optimisic mode by default. [Learn more.]({url}#tilt_optimistic)",
+                                "tilt_optimistic": "Flag that defines if tilt works in optimistic mode. If tilt status topic is not defined, tilt works in optimistic mode by default. [Learn more.]({url}#tilt_optimistic)",
                                 "tilt_status_template": "Defines a [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract the payload for the tilt status topic. Within the template the following variables are available: `entity_id`, `position_open`, `position_closed`, `tilt_min` and `tilt_max`. [Learn more.]({url}#tilt_status_template)",
                                 "tilt_status_topic": "The MQTT topic subscribed to receive tilt status update values. [Learn more.]({url}#tilt_status_topic)"
                             },
                             "name": "Tilt settings"
                         },
+                        "current_humidity_settings": {
+                            "data": {
+                                "current_humidity_template": "Current humidity template",
+                                "current_humidity_topic": "Current humidity topic"
+                            },
+                            "data_description": {
+                                "current_humidity_template": "Defines a [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract the current humidity value. [Learn more.]({url}#current_humidity_template)",
+                                "current_humidity_topic": "The MQTT topic subscribed to receive current humidity update values. [Learn more.]({url}#current_humidity_topic)"
+                            },
+                            "name": "Current humidity settings"
+                        },
+                        "current_temperature_settings": {
+                            "data": {
+                                "current_temperature_template": "Current temperature template",
+                                "current_temperature_topic": "Current temperature topic"
+                            },
+                            "data_description": {
+                                "current_temperature_template": "Defines a [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract the current temperature value. [Learn more.]({url}#current_temperature_template)",
+                                "current_temperature_topic": "The MQTT topic subscribed to receive current temperature update values. [Learn more.]({url}#current_temperature_topic)"
+                            },
+                            "name": "Current temperature settings"
+                        },
                         "fan_direction_settings": {
                             "data": {
                                 "direction_command_template": "Direction command template",
@@ -625,6 +807,66 @@
                                 "xy_value_template": "Defines a [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract the XY value."
                             },
                             "name": "XY color mode settings"
+                        },
+                        "target_humidity_settings": {
+                            "data": {
+                                "max_humidity": "Maximum humidity",
+                                "min_humidity": "Minimum humidity",
+                                "target_humidity_command_template": "Humidity command template",
+                                "target_humidity_command_topic": "Humidity command topic",
+                                "target_humidity_state_template": "Humidity state template",
+                                "target_humidity_state_topic": "Humidity state topic"
+                            },
+                            "data_description": {
+                                "max_humidity": "The maximum target humidity that can be set.",
+                                "min_humidity": "The minimum target humidity that can be set.",
+                                "target_humidity_command_template": "A [template](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) to compose the payload to be published at the humidity command topic.",
+                                "target_humidity_command_topic": "The MQTT topic to publish commands to change the climate target humidity. [Learn more.]({url}#humidity_command_topic)",
+                                "target_humidity_state_template": "A [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to render the value received on the humidity state topic with.",
+                                "target_humidity_state_topic": "The MQTT topic to subscribe for changes of the target humidity. [Learn more.]({url}#humidity_state_topic)"
+                            },
+                            "name": "Target humidity settings"
+                        },
+                        "target_temperature_settings": {
+                            "data": {
+                                "initial": "Initial temperature",
+                                "max_temp": "Maximum temperature",
+                                "min_temp": "Minimum temperature",
+                                "precision": "Precision",
+                                "temp_step": "Temperature step",
+                                "temperature_command_template": "Temperature command template",
+                                "temperature_command_topic": "Temperature command topic",
+                                "temperature_high_command_template": "Upper temperature command template",
+                                "temperature_high_command_topic": "Upper temperature command topic",
+                                "temperature_high_state_template": "Upper temperature state template",
+                                "temperature_high_state_topic": "Upper temperature state topic",
+                                "temperature_low_command_template": "Lower temperature command template",
+                                "temperature_low_command_topic": "Lower temperature command topic",
+                                "temperature_low_state_template": "Lower temperature state template",
+                                "temperature_low_state_topic": "Lower temperature state topic",
+                                "temperature_state_template": "Temperature state template",
+                                "temperature_state_topic": "Temperature state topic"
+                            },
+                            "data_description": {
+                                "initial": "The climate initalizes with this target temperature.",
+                                "max_temp": "The maximum target temperature that can be set.",
+                                "min_temp": "The minimum target temperature that can be set.",
+                                "precision": "The precision in degrees the thermostat is working at.",
+                                "temp_step": "The target temperature step in degrees Celsius or Fahrenheit.",
+                                "temperature_command_template": "A [template](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) to compose the payload to be published at the temperature command topic.",
+                                "temperature_command_topic": "The MQTT topic to publish commands to change the climate target temperature. [Learn more.]({url}#temperature_command_topic)",
+                                "temperature_high_command_template": "A [template](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) to compose the payload to be published at the upper temperature command topic.",
+                                "temperature_high_command_topic": "The MQTT topic to publish commands to change the climate upper target temperature. [Learn more.]({url}#temperature_high_command_topic)",
+                                "temperature_high_state_template": "A [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to render the value received on the upper temperature state topic with.",
+                                "temperature_high_state_topic": "The MQTT topic to subscribe for changes of the upper target temperature. [Learn more.]({url}#temperature_high_state_topic)",
+                                "temperature_low_command_template": "A [template](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) to compose the payload to be published at the lower temperature command topic.",
+                                "temperature_low_command_topic": "The MQTT topic to publish commands to change the climate lower target temperature. [Learn more.]({url}#temperature_low_command_topic)",
+                                "temperature_low_state_template": "A [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to render the value received on the lower temperature state topic with.",
+                                "temperature_low_state_topic": "The MQTT topic to subscribe for changes of the lower target temperature. [Learn more.]({url}#temperature_low_state_topic)",
+                                "temperature_state_template": "A [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to render the value received on the temperature state topic with.",
+                                "temperature_state_topic": "The MQTT topic to subscribe for changes of the target temperature. [Learn more.]({url}#temperature_state_topic)"
+                            },
+                            "name": "Target temperature settings"
                         }
                     },
                     "title": "Configure MQTT device \"{mqtt_device}\""
@@ -636,6 +878,7 @@
                         "delete_entity": "Delete an entity",
                         "device": "Update device properties",
                         "entity": "Add another entity to \"{mqtt_device}\"",
+                        "export": "Export MQTT device configuration",
                         "save_changes": "Save changes",
                         "update_entity": "Update entity properties"
                     },
@@ -712,6 +955,28 @@
         "invalid_platform_config": {
             "description": "Home Assistant detected an invalid config for a manually configured item.\n\nPlatform domain: **{domain}**\nConfiguration file: **{config_file}**\nNear line: **{line}**\nConfiguration found:\n```yaml\n{config}\n```\nError: **{error}**.\n\nMake sure the configuration is valid and [reload](/developer-tools/yaml) the manually configured MQTT items or restart Home Assistant to fix this issue.",
             "title": "Invalid config found for MQTT {domain} item"
+        },
+        "subentry_migration_discovery": {
+            "fix_flow": {
+                "step": {
+                    "confirm": {
+                        "description": "Exported MQTT device \"{name}\" identified via MQTT discovery. Select **Submit** to confirm that the MQTT device is to be migrated to the main MQTT configuration, and to remove the existing MQTT device subentry. Make sure that the discovery is retained at the MQTT broker, or is resent after the subentry is removed, so that the MQTT device will be set up correctly. As an alternative you can change the device identifiers and entity unique ID-s in your MQTT discovery configuration payload, and cancel this repair if you want to keep the MQTT device subentry.",
+                        "title": "MQTT device \"{name}\" subentry migration to MQTT discovery"
+                    }
+                }
+            },
+            "title": "MQTT device \"{name}\" subentry migration to MQTT discovery"
+        },
+        "subentry_migration_yaml": {
+            "fix_flow": {
+                "step": {
+                    "confirm": {
+                        "description": "Exported MQTT device \"{name}\" identified in YAML configuration. Select **Submit** to confirm that the MQTT device is to be migrated to main MQTT config entry, and to remove the existing MQTT device subentry. As an alternative you can change the device identifiers and entity unique ID-s in your configuration.yaml file, and cancel this repair if you want to keep the MQTT device subentry.",
+                        "title": "MQTT device \"{name}\" subentry migration to YAML"
+                    }
+                }
+            },
+            "title": "MQTT device \"{name}\" subentry migration to YAML"
         }
     },
     "options": {
@@ -805,6 +1070,17 @@
         }
     },
     "selector": {
+        "climate_modes": {
+            "options": {
+                "auto": "Auto",
+                "cool": "Cool",
+                "dry": "Dry",
+                "fan_only": "Fan only",
+                "heat": "Heat",
+                "heat_cool": "Heat/Cool",
+                "off": "Off"
+            }
+        },
         "device_class_binary_sensor": {
             "options": {
                 "battery": "Battery",
@@ -948,6 +1224,7 @@
             "options": {
                 "binary_sensor": "Binary sensor",
                 "button": "Button",
+                "climate": "Climate",
                 "cover": "Cover",
                 "fan": "Fan",
                 "light": "Light",
@@ -983,6 +1260,13 @@
                 "white": "White",
                 "xy": "XY"
             }
+        },
+        "target_temperature_feature": {
+            "options": {
+                "high_low": "Upper/lower target temperature",
+                "none": "No target temperature",
+                "single": "Single target temperature"
+            }
         }
     },
     "services": {