homeassistant 2025.7.0b8__py3-none-any.whl → 2025.7.0b9__py3-none-any.whl

homeassistant/components/shelly/translations/de.json

@@ -254,6 +254,20 @@
             "description": "Das Shelly-Ger\u00e4t {device_name} mit der IP-Adresse {ip_address} erfordert eine Kalibrierung. Um das Ger\u00e4t zu kalibrieren, muss es nach ordnungsgem\u00e4\u00dfer Installation am Ventil neu gestartet werden. Du kannst das Ger\u00e4t in seiner Weboberfl\u00e4che neu starten. Gehe dazu zu \u201eSettings\u201c \u2192 \u201eDevice Reboot\u201c.",
             "title": "Das Shelly-Ger\u00e4t {device_name} ist nicht kalibriert"
         },
+        "outbound_websocket_incorrectly_enabled": {
+            "fix_flow": {
+                "abort": {
+                    "cannot_connect": "Verbindung fehlgeschlagen"
+                },
+                "step": {
+                    "confirm": {
+                        "description": "Dein Shelly-Ger\u00e4t {device_name} mit der IP-Adresse {ip_address} ist ein nicht-schlafendes Ger\u00e4t, und Outbound WebSocket sollte in seiner Konfiguration deaktiviert sein. \n \nDr\u00fccke **OK**, um Outbound WebSocket zu deaktivieren.",
+                        "title": "F\u00fcr {device_name} ist Outbound WebSocket aktiviert"
+                    }
+                }
+            },
+            "title": "F\u00fcr {device_name} ist Outbound WebSocket aktiviert"
+        },
         "push_update_failure": {
             "description": "Home Assistant empf\u00e4ngt keine Push-Updates vom Shelly-Ger\u00e4t {device_name} mit der IP-Adresse {ip_address}. \u00dcberpr\u00fcfe die CoIoT-Konfiguration in der Weboberfl\u00e4che des Ger\u00e4ts und deine Netzwerkkonfiguration.",
             "title": "Shelly-Ger\u00e4t {device_name} Push-Update fehlgeschlagen"

homeassistant/components/shelly/translations/en.json

@@ -254,6 +254,20 @@
             "description": "Shelly device {device_name} with IP address {ip_address} requires calibration. To calibrate the device, it must be rebooted after proper installation on the valve. You can reboot the device in its web panel, go to 'Settings' > 'Device Reboot'.",
             "title": "Shelly device {device_name} is not calibrated"
         },
+        "outbound_websocket_incorrectly_enabled": {
+            "fix_flow": {
+                "abort": {
+                    "cannot_connect": "Failed to connect"
+                },
+                "step": {
+                    "confirm": {
+                        "description": "Your Shelly device {device_name} with IP address {ip_address} is a non-sleeping device and Outbound WebSocket should be disabled in its configuration.\n\nSelect **Submit** button to disable Outbound WebSocket.",
+                        "title": "Outbound WebSocket is enabled for {device_name}"
+                    }
+                }
+            },
+            "title": "Outbound WebSocket is enabled for {device_name}"
+        },
         "push_update_failure": {
             "description": "Home Assistant is not receiving push updates from the Shelly device {device_name} with IP address {ip_address}. Check the CoIoT configuration in the web panel of the device and your network configuration.",
             "title": "Shelly device {device_name} push update failure"

homeassistant/components/shelly/translations/es.json

@@ -254,6 +254,20 @@
             "description": "El dispositivo Shelly {device_name} con direcci\u00f3n IP {ip_address} requiere calibraci\u00f3n. Para calibrar el dispositivo, debe reiniciarse despu\u00e9s de la instalaci\u00f3n adecuada en la v\u00e1lvula. Puedes reiniciar el dispositivo en su panel web, ve a 'Configuraci\u00f3n' > 'Reinicio del dispositivo'.",
             "title": "El dispositivo Shelly {device_name} no est\u00e1 calibrado"
         },
+        "outbound_websocket_incorrectly_enabled": {
+            "fix_flow": {
+                "abort": {
+                    "cannot_connect": "No se pudo conectar"
+                },
+                "step": {
+                    "confirm": {
+                        "description": "Tu dispositivo Shelly {device_name} con direcci\u00f3n IP {ip_address} es un dispositivo que no est\u00e1 inactivo y el WebSocket de salida debe estar deshabilitado en su configuraci\u00f3n. \n \nSelecciona el bot\u00f3n **Enviar** para deshabilitar el WebSocket de salida.",
+                        "title": "El WebSocket de salida est\u00e1 habilitado para {device_name}"
+                    }
+                }
+            },
+            "title": "El WebSocket de salida est\u00e1 habilitado para {device_name}"
+        },
         "push_update_failure": {
             "description": "Home Assistant no est\u00e1 recibiendo actualizaciones autom\u00e1ticas del dispositivo Shelly {device_name} con direcci\u00f3n IP {ip_address}. Consulta la configuraci\u00f3n de CoIoT en el panel web del dispositivo y tu configuraci\u00f3n de red.",
             "title": "Fallo en la actualizaci\u00f3n push del dispositivo {device_name} de Shelly"

homeassistant/components/shelly/translations/et.json

@@ -254,6 +254,17 @@
             "description": "Shelly seade {device_name} IP-aadressiga {ip_address} n\u00f5uab kalibreerimist. Seadme kalibreerimiseks tuleb see p\u00e4rast klapile n\u00f5uetekohast paigaldamist taask\u00e4ivitada. Saad seadme taask\u00e4ivitada selle veebipaneelil, mine jaotisse \"Seaded\" > \"Seadme taask\u00e4ivitamine\".",
             "title": "Shelly seade {device_name} ei ole kalibreeritud"
         },
+        "outbound_websocket_incorrectly_enabled": {
+            "fix_flow": {
+                "step": {
+                    "confirm": {
+                        "description": "Shelly seade {device_name} IP-aadressiga {ip_address} on mitteunere\u017eiimis olev seade ja v\u00e4ljaminev WebSocket tuleks selle konfiguratsioonis keelata.\n\nVali nupp **Esita**, et keelata v\u00e4ljaminev WebSocket.",
+                        "title": "V\u00e4ljaminev WebSocket on seadmel {device_name} lubatud"
+                    }
+                }
+            },
+            "title": "V\u00e4ljaminev WebSocket on seadmel {device_name} lubatud"
+        },
         "push_update_failure": {
             "description": "Home Assistant ei saa t\u00f5ukev\u00e4rskendusi Shelly seadmest {device_name} IP-aadressiga {ip_address}. Kontrolli CoIoT konfiguratsiooni seadme veebipaneelil ja oma v\u00f5rgu konfiguratsiooni.",
             "title": "Shelly seadme {device_name} t\u00f5ukev\u00e4rskenduse t\u00f5rge"

homeassistant/components/sma/config_flow.py

@@ -184,7 +184,36 @@ class SmaConfigFlow(ConfigFlow, domain=DOMAIN):
         self._data[CONF_HOST] = discovery_info.ip
         self._data[CONF_MAC] = format_mac(self._discovery_data[CONF_MAC])
 
-        await self.async_set_unique_id(discovery_info.hostname.replace("SMA", ""))
+        _LOGGER.debug(
+            "DHCP discovery detected SMA device: %s, IP: %s, MAC: %s",
+            self._discovery_data[CONF_NAME],
+            self._discovery_data[CONF_HOST],
+            self._discovery_data[CONF_MAC],
+        )
+
+        existing_entries_with_host = [
+            entry
+            for entry in self._async_current_entries(include_ignore=False)
+            if entry.data.get(CONF_HOST) == self._data[CONF_HOST]
+            and not entry.data.get(CONF_MAC)
+        ]
+
+        # If we have an existing entry with the same host but no MAC address,
+        # we update the entry with the MAC address and reload it.
+        if existing_entries_with_host:
+            entry = existing_entries_with_host[0]
+            self.async_update_reload_and_abort(
+                entry, data_updates={CONF_MAC: self._data[CONF_MAC]}
+            )
+
+        # Finally, check if the hostname (which represents the SMA serial number) is unique
+        serial_number = discovery_info.hostname.lower()
+        # Example hostname: sma12345678-01
+        # Remove 'sma' prefix and strip everything after the dash (including the dash)
+        if serial_number.startswith("sma"):
+            serial_number = serial_number.removeprefix("sma")
+        serial_number = serial_number.split("-", 1)[0]
+        await self.async_set_unique_id(serial_number)
         self._abort_if_unique_id_configured()
 
         return await self.async_step_discovery_confirm()

homeassistant/components/smarla/translations/it.json

@@ -1,4 +1,13 @@
 {
+    "config": {
+        "abort": {
+            "already_configured": "Il dispositivo \u00e8 gi\u00e0 configurato"
+        },
+        "error": {
+            "invalid_auth": "Autenticazione non valida",
+            "malformed_token": "Token di accesso non valido"
+        }
+    },
     "entity": {
         "number": {
             "intensity": {

homeassistant/components/sonos/translations/lt.json

@@ -83,6 +83,9 @@
         "announce_media_error": {
             "message": "Nepavyko paskelbti klipo {media_id} {response}"
         },
+        "entity_not_found": {
+            "message": "Objektas {entity_id} nerastas."
+        },
         "invalid_content_type": {
             "message": "\u201eSonos\u201c nepalaiko medijos turinio tipo: {media_type}"
         },
@@ -94,6 +97,12 @@
         },
         "invalid_sonos_playlist": {
             "message": "Nepavyko rasti \u201eSonos\u201c grojara\u0161\u010dio: {name}"
+        },
+        "speaker_not_found": {
+            "message": "{entity_id} n\u0117ra \u017einomas Sonos garsiakalbis."
+        },
+        "timeout_join": {
+            "message": "Laukiant, kol Sonos grotuvas prisijungs prie grup\u0117s {group_description} baig\u0117si skirtasis laikas."
         }
     },
     "issues": {

homeassistant/components/sql/translations/it.json

@@ -117,6 +117,7 @@
         "state_class": {
             "options": {
                 "measurement": "Misurazione",
+                "measurement_angle": "Angolo di misura",
                 "total": "Totale",
                 "total_increasing": "Aumento in totale"
             }

homeassistant/components/squeezebox/translations/it.json

@@ -47,6 +47,11 @@
             "player_count": {
                 "unit_of_measurement": "giocatori"
             }
+        },
+        "switch": {
+            "alarms_enabled": {
+                "name": "Allarmi attivati"
+            }
         }
     },
     "services": {

homeassistant/components/subaru/translations/lt.json

@@ -101,8 +101,10 @@
     },
     "services": {
         "unlock_specific_door": {
+            "description": "Atrakina vairuotojo duris, visas duris arba baga\u017ein\u0117s dangt\u012f.",
             "fields": {
                 "door": {
+                    "description": "Konkre\u010dios durys, kurias reikia atrakinti.",
                     "name": "Durys"
                 }
             },

homeassistant/components/subaru/translations/mk.json

@@ -0,0 +1,12 @@
+{
+    "services": {
+        "unlock_specific_door": {
+            "description": "\u0408\u0430 \u043e\u0442\u043a\u043b\u0443\u0447\u0443\u0432\u0430 \u0432\u0440\u0430\u0442\u0430\u0442\u0430 \u043d\u0430 \u0432\u043e\u0437\u0430\u0447\u043e\u0442, \u0441\u0438\u0442\u0435 \u0432\u0440\u0430\u0442\u0438 \u0438\u043b\u0438 \u0437\u0430\u0434\u043d\u0430\u0442\u0430 \u0432\u0440\u0430\u0442\u0430.",
+            "fields": {
+                "door": {
+                    "description": "\u0421\u043f\u0435\u0446\u0438\u0444\u0438\u0447\u043d\u0430\u0442\u0430(\u0438\u0442\u0435) \u0432\u0440\u0430\u0442\u0430(\u0438) \u0448\u0442\u043e \u0442\u0440\u0435\u0431\u0430 \u0434\u0430 \u0441\u0435 \u043e\u0442\u043a\u043b\u0443\u0447\u0430\u0442."
+                }
+            }
+        }
+    }
+}

homeassistant/components/switchbot/translations/et.json

@@ -222,6 +222,7 @@
             "water_level": {
                 "name": "Veetase",
                 "state": {
+                    "empty": "T\u00fchi",
                     "high": "K\u00f5rge",
                     "low": "Madal",
                     "medium": "Keskmine"

homeassistant/components/switchbot/translations/ga.json

@@ -81,6 +81,13 @@
                             "cool": "Fionnuar",
                             "fade": "C\u00e9imni\u00fa",
                             "flashing": "Ag splancadh",
+                            "modern": "Nua-Aimseartha",
+                            "ocean": "Aig\u00e9an",
+                            "relax": "Sc\u00edth a ligean",
+                            "rose": "R\u00f3s",
+                            "smooth": "R\u00e9idh",
+                            "strobe": "Strob",
+                            "sunset": "Lu\u00ed na gr\u00e9ine",
                             "vitality": "Beocht"
                         }
                     }
@@ -96,6 +103,12 @@
                     "moderate": "Measartha",
                     "unhealthy": "M\u00edshl\u00e1inti\u00fail"
                 }
+            },
+            "water_level": {
+                "state": {
+                    "empty": "Folamh",
+                    "high": "Ard"
+                }
             }
         }
     },

homeassistant/components/switchbot/translations/lt.json

@@ -135,6 +135,22 @@
             }
         },
         "humidifier": {
+            "evaporative_humidifier": {
+                "state_attributes": {
+                    "mode": {
+                        "state": {
+                            "auto": "Automatinis",
+                            "drying_filter": "D\u017eiovinimo filtras",
+                            "high": "Auk\u0161tas",
+                            "low": "\u017demas",
+                            "medium": "Vidutinis",
+                            "quiet": "Tyliai",
+                            "sleep": "Miegas",
+                            "target_humidity": "Tikslin\u0117 dr\u0117gm\u0117"
+                        }
+                    }
+                }
+            },
             "humidifier": {
                 "state_attributes": {
                     "last_run_success": {
@@ -146,6 +162,35 @@
                 }
             }
         },
+        "light": {
+            "light": {
+                "state_attributes": {
+                    "effect": {
+                        "state": {
+                            "autumn": "Ruduo",
+                            "breathing": "Kv\u0117pavimas",
+                            "christmas": "Kal\u0117dos",
+                            "colorful": "Spalvingas",
+                            "cool": "\u0160aunu",
+                            "fade": "I\u0161blukimas",
+                            "flashing": "Mirksintis",
+                            "flickering": "Mirg\u0117jimas",
+                            "flow": "Srautas",
+                            "forest": "Mi\u0161kas",
+                            "halloween": "Helovinas",
+                            "modern": "\u0160iuolaikinis",
+                            "ocean": "Vandenynas",
+                            "relax": "Atsipalaiduokite",
+                            "rose": "Ro\u017e\u0117",
+                            "smooth": "Sklandus",
+                            "strobe": "Stroboskopas",
+                            "sunset": "Saul\u0117lydis",
+                            "vitality": "Gyvybingumas"
+                        }
+                    }
+                }
+            }
+        },
         "lock": {
             "lock": {
                 "state_attributes": {
@@ -174,6 +219,15 @@
             "light_level": {
                 "name": "\u0160viesos lygis"
             },
+            "water_level": {
+                "name": "Vandens lygis",
+                "state": {
+                    "empty": "Tu\u0161\u010dias",
+                    "high": "Auk\u0161tas",
+                    "low": "\u017demas",
+                    "medium": "Vidutinis"
+                }
+            },
             "wifi_signal": {
                 "name": "Wi-Fi signalas"
             }

homeassistant/components/switchbot/translations/nl.json

@@ -154,6 +154,7 @@
                             "fade": "Vervagen",
                             "flashing": "Knipperend",
                             "flickering": "Flikkerend",
+                            "halloween": "Halloween",
                             "sunset": "Zonsondergang"
                         }
                     }

homeassistant/components/switchbot/translations/sk.json

@@ -222,6 +222,7 @@
             "water_level": {
                 "name": "Hladina vody",
                 "state": {
+                    "empty": "Pr\u00e1zdny",
                     "high": "Vysok\u00e1",
                     "low": "N\u00edzka",
                     "medium": "Stredn\u00e1"

homeassistant/components/switchbot/translations/zh-Hant.json

@@ -222,6 +222,7 @@
             "water_level": {
                 "name": "\u6c34\u4f4d",
                 "state": {
+                    "empty": "\u8017\u76e1",
                     "high": "\u9ad8",
                     "low": "\u4f4e",
                     "medium": "\u4e2d"

homeassistant/components/telegram_bot/translations/bg.json

@@ -18,11 +18,21 @@
             "reconfigure": {
                 "data": {
                     "platform": "\u041f\u043b\u0430\u0442\u0444\u043e\u0440\u043c\u0430"
+                },
+                "sections": {
+                    "advanced_settings": {
+                        "name": "\u0420\u0430\u0437\u0448\u0438\u0440\u0435\u043d\u0438 \u043d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0438"
+                    }
                 }
             },
             "user": {
                 "data": {
                     "platform": "\u041f\u043b\u0430\u0442\u0444\u043e\u0440\u043c\u0430"
+                },
+                "sections": {
+                    "advanced_settings": {
+                        "name": "\u0420\u0430\u0437\u0448\u0438\u0440\u0435\u043d\u0438 \u043d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0438"
+                    }
                 }
             },
             "webhooks": {

homeassistant/components/telegram_bot/translations/ga.json

@@ -21,6 +21,17 @@
                     "platform": "Cur i bhfeidhm bot Telegram"
                 },
                 "description": "Athchumraigh bot Telegram",
+                "sections": {
+                    "advanced_settings": {
+                        "data": {
+                            "proxy_url": "URL seachfhreastala\u00ed"
+                        },
+                        "data_description": {
+                            "proxy_url": "URL seachfhreastala\u00ed m\u00e1 t\u00e1 ceann \u00e1 \u00fas\u00e1id, agus ainm \u00fas\u00e1ideora agus pasfhocal san \u00e1ireamh m\u00e1s mian leat. (socks5://ainm \u00fas\u00e1ideora:pasfhocal@ip_proxy:port_proxy)"
+                        },
+                        "name": "Socruithe ardleibh\u00e9il"
+                    }
+                },
                 "title": "Socr\u00fa bot Telegram"
             },
             "user": {
@@ -30,6 +41,17 @@
                 "data_description": {
                     "api_key": "Comhartha API do bhota.",
                     "platform": "Cur i bhfeidhm bot Telegram"
+                },
+                "sections": {
+                    "advanced_settings": {
+                        "data": {
+                            "proxy_url": "URL seachfhreastala\u00ed"
+                        },
+                        "data_description": {
+                            "proxy_url": "URL seachfhreastala\u00ed m\u00e1 t\u00e1 ceann \u00e1 \u00fas\u00e1id, agus ainm \u00fas\u00e1ideora agus pasfhocal san \u00e1ireamh m\u00e1s mian leat. (socks5://ainm \u00fas\u00e1ideora:pasfhocal@ip_proxy:port_proxy)"
+                        },
+                        "name": "Socruithe ardleibh\u00e9il"
+                    }
                 }
             },
             "webhooks": {
@@ -72,12 +94,18 @@
         "allowlist_external_dirs_error": {
             "message": "N\u00edl cos\u00e1n an chomhaid cumraithe in allowlist_external_dirs."
         },
+        "failed_chat_ids": {
+            "message": "Spriocanna n\u00e1r \u00e9irigh leo: {chat_ids}. Deimhnigh le do thoil go bhfuil na haitheantais comhr\u00e1 do {bot_name} cumraithe."
+        },
         "failed_to_load_file": {
             "message": "Theip ar an gcomhad a lucht\u00fa: {error}"
         },
         "failed_to_load_url": {
             "message": "Theip ar an URL a l\u00f3d\u00e1il: {error}"
         },
+        "invalid_chat_ids": {
+            "message": "Aitheant\u00f3ir\u00ed comhr\u00e1 neamhbhail\u00ed: {chat_ids}. Cumraigh na haitheantais comhr\u00e1 do {bot_name} le do thoil."
+        },
         "missing_allowed_chat_ids": {
             "message": "N\u00edor aims\u00edodh aon aitheant\u00f3ir\u00ed comhr\u00e1 ceadaithe. Cuir aitheant\u00f3ir\u00ed comhr\u00e1 ceadaithe leis do {bot_name}."
         },

homeassistant/components/telegram_bot/translations/it.json

@@ -1,5 +1,17 @@
 {
     "config": {
+        "abort": {
+            "already_configured": "Il servizio \u00e8 gi\u00e0 configurato",
+            "reauth_successful": "L'autenticazione ha avuto successo",
+            "reconfigure_successful": "La riconfigurazione \u00e8 stata completata con successo"
+        },
+        "error": {
+            "invalid_api_key": "Chiave API non valida",
+            "invalid_proxy_url": "{proxy_url_error}",
+            "invalid_trusted_networks": "Rete attendibile non valida: {error_message}",
+            "invalid_url": "L'URL deve iniziare con https",
+            "no_url_available": "\u00c8 necessario fornire un URL poich\u00e9 non hai impostato un URL esterno in Home Assistant"
+        },
         "step": {
             "reauth_confirm": {
                 "data": {

homeassistant/components/telegram_bot/translations/lt.json

@@ -30,15 +30,39 @@
                     "platform": "Telegram roboto \u012fdiegimas"
                 },
                 "description": "I\u0161 naujo sukonfig\u016bruoti Telegram robot\u0105",
+                "sections": {
+                    "advanced_settings": {
+                        "data": {
+                            "proxy_url": "Tarpinio serverio URL"
+                        },
+                        "data_description": {
+                            "proxy_url": "Tarpinio serverio URL, jei veikia u\u017e tokio serverio, pasirinktinai \u012fskaitant vartotojo vard\u0105 ir slapta\u017eod\u012f. \n (socks5://username:password@proxy_ip:proxy_port)"
+                        },
+                        "name": "I\u0161pl\u0117stiniai nustatymai"
+                    }
+                },
                 "title": "Telegram boto s\u0105ranka"
             },
             "user": {
                 "data": {
+                    "api_key": "API prieigos raktas",
                     "platform": "Platforma"
                 },
                 "data_description": {
                     "api_key": "J\u016bs\u0173 roboto API prieigos raktas.",
                     "platform": "Telegram roboto \u012fdiegimas"
+                },
+                "description": "Nor\u0117dami sukurti \u201eTelegram\u201c bot\u0105, atlikite \u0161iuos veiksmus: \n \n 1. Atidarykite Telegram ir prad\u0117kite pokalb\u012f su [ {botfather_username} ]( {botfather_url} ). \n 1. I\u0161si\u0173skite komand\u0105 `/newbot`. \n 1. Vykdykite instrukcijas, kad sukurtum\u0117te robot\u0105 ir gautum\u0117te API prieigos rakt\u0105.",
+                "sections": {
+                    "advanced_settings": {
+                        "data": {
+                            "proxy_url": "Tarpinio serverio URL"
+                        },
+                        "data_description": {
+                            "proxy_url": "Tarpinio serverio URL, jei veikia u\u017e tokio serverio, pasirinktinai \u012fskaitant vartotojo vard\u0105 ir slapta\u017eod\u012f. \n (socks5://username:password@proxy_ip:proxy_port)"
+                        },
+                        "name": "I\u0161pl\u0117stiniai nustatymai"
+                    }
                 }
             },
             "webhooks": {
@@ -82,12 +106,18 @@
         "allowlist_external_dirs_error": {
             "message": "Failo kelias nebuvo sukonfig\u016bruotas allowlist_external_dirs."
         },
+        "failed_chat_ids": {
+            "message": "Nepavyk\u0119 taikiniai: {chat_ids}. Patikrinkite, ar {bot_name} pokalbi\u0173 ID sukonfig\u016bruoti."
+        },
         "failed_to_load_file": {
             "message": "Nepavyko \u012fkelti failo: {error}"
         },
         "failed_to_load_url": {
             "message": "Nepavyko \u012fkelti URL: {error}"
         },
+        "invalid_chat_ids": {
+            "message": "Neteisingi pokalbi\u0173 ID: {chat_ids}. Pra\u0161ome sukonfig\u016bruoti {bot_name} pokalbi\u0173 ID."
+        },
         "missing_allowed_chat_ids": {
             "message": "Nerasta leid\u017eiam\u0173 pokalbi\u0173 ID. Prid\u0117kite leid\u017eiamus pokalbi\u0173 ID, skirtus {bot_name}."
         },

homeassistant/components/telegram_bot/translations/mk.json

@@ -20,6 +20,11 @@
                 "data_description": {
                     "api_key": "API \u0442\u043e\u043a\u0435\u043d\u043e\u0442 \u043d\u0430 \u0432\u0430\u0448\u0438\u043e\u0442 \u0431\u043e\u0442.",
                     "platform": "\u0418\u043c\u043f\u043b\u0435\u043c\u0435\u043d\u0442\u0430\u0446\u0438\u0458\u0430 \u043d\u0430 Telegram bot"
+                },
+                "sections": {
+                    "advanced_settings": {
+                        "name": "\u041d\u0430\u043f\u0440\u0435\u0434\u043d\u0438 \u043f\u043e\u0441\u0442\u0430\u0432\u043a\u0438"
+                    }
                 }
             },
             "webhooks": {

homeassistant/components/template/translations/it.json

@@ -243,6 +243,7 @@
         "sensor_state_class": {
             "options": {
                 "measurement": "Misurazione",
+                "measurement_angle": "Angolo di misura",
                 "total": "Totale",
                 "total_increasing": "Aumento in totale"
             }

homeassistant/components/tesla_fleet/translations/et.json

@@ -529,6 +529,9 @@
             "vehicle_state_tpms_pressure_rr": {
                 "name": "Rehvir\u00f5hk taga paremal"
             },
+            "version": {
+                "name": "Versioon"
+            },
             "vin": {
                 "name": "S\u00f5iduk"
             },

homeassistant/components/tesla_fleet/translations/lt.json

@@ -529,6 +529,9 @@
             "vehicle_state_tpms_pressure_rr": {
                 "name": "Padang\u0173 sl\u0117gis galin\u0117je de\u0161in\u0117je"
             },
+            "version": {
+                "name": "Versija"
+            },
             "vin": {
                 "name": "Transporto priemon\u0117"
             },

homeassistant/components/tesla_fleet/translations/mk.json

@@ -91,6 +91,9 @@
             },
             "total_pack_energy": {
                 "name": "\u0412\u043a\u0443\u043f\u043d\u0430 \u0435\u043d\u0435\u0440\u0433\u0438\u0458\u0430 \u043d\u0430 \u043f\u0430\u043a\u0435\u0442\u043e\u0442"
+            },
+            "version": {
+                "name": "\u0412\u0435\u0440\u0437\u0438\u0458\u0430"
             }
         }
     },

homeassistant/components/tesla_fleet/translations/nl.json

@@ -195,6 +195,9 @@
             "total_solar_generation": {
                 "name": "Zonne-energie"
             },
+            "version": {
+                "name": "Versie"
+            },
             "vin": {
                 "name": "Voertuig"
             }

homeassistant/components/thermopro/manifest.json

@@ -24,5 +24,5 @@
   "dependencies": ["bluetooth_adapters"],
   "documentation": "https://www.home-assistant.io/integrations/thermopro",
   "iot_class": "local_push",
-  "requirements": ["thermopro-ble==0.13.0"]
+  "requirements": ["thermopro-ble==0.13.1"]
 }

homeassistant/components/thermopro/translations/lt.json

@@ -17,5 +17,12 @@
                 "description": "Pasirinkite prietais\u0105, kur\u012f norite nustatyti"
             }
         }
+    },
+    "entity": {
+        "button": {
+            "set_datetime": {
+                "name": "Nustatykite dat\u0105 ir laik\u0105"
+            }
+        }
     }
 }

homeassistant/components/tuya/translations/it.json

@@ -197,6 +197,19 @@
                     "2": "Acceso/a"
                 }
             },
+            "blanket_level": {
+                "state": {
+                    "level_1": "Basso",
+                    "level_10": "Alto",
+                    "level_2": "Livello 2",
+                    "level_3": "Livello 3",
+                    "level_4": "Livello 4",
+                    "level_5": "Livello 5",
+                    "level_6": "Livello 6",
+                    "level_7": "Livello 7",
+                    "level_8": "Livello 8"
+                }
+            },
             "brightness": {
                 "name": "Luminosit\u00e0"
             },

homeassistant/components/unifiprotect/config_flow.py

@@ -274,7 +274,7 @@ class ProtectFlowHandler(ConfigFlow, domain=DOMAIN):
             _LOGGER.debug(ex)
             errors[CONF_PASSWORD] = "invalid_auth"
         except ClientError as ex:
-            _LOGGER.debug(ex)
+            _LOGGER.error(ex)
             errors["base"] = "cannot_connect"
         else:
             if nvr_data.version < MIN_REQUIRED_PROTECT_V:

homeassistant/components/uptimerobot/translations/it.json

@@ -39,5 +39,10 @@
                 }
             }
         }
+    },
+    "exceptions": {
+        "api_exception": {
+            "message": "Impossibile attivare/disattivare il monitoraggio: {error}"
+        }
     }
 }

homeassistant/components/weatherflow_cloud/translations/ga.json

@@ -0,0 +1 @@
+{}