homeassistant 2025.12.0b1__py3-none-any.whl → 2025.12.0b2__py3-none-any.whl

homeassistant/components/shelly/translations/sv.json

@@ -6,6 +6,7 @@
             "another_device": "Omkonfigureringen misslyckades, IP-adressen/v\u00e4rdnamnet f\u00f6r en annan Shelly-enhet anv\u00e4ndes.",
             "ble_not_permitted": "Enheten \u00e4r bunden till ett Shelly-molnkonto och kan inte tillhandah\u00e5llas via Bluetooth. Anv\u00e4nd Shelly-appen f\u00f6r att tillhandah\u00e5lla WiFi-autentiseringsuppgifter och l\u00e4gg sedan till enheten n\u00e4r den visas i ditt n\u00e4tverk.",
             "cannot_connect": "Det gick inte att ansluta till enheten. Se till att enheten \u00e4r p\u00e5slagen och inom r\u00e4ckh\u00e5ll.",
+            "custom_port_not_supported": "Gen1-enheter st\u00f6djer inte anpassad port.",
             "firmware_not_fully_provisioned": "Enheten \u00e4r inte helt etablerad. Kontakta Shellys support",
             "invalid_discovery_info": "Ogiltig information om Bluetooth-identifiering.",
             "ipv6_not_supported": "IPv6 st\u00f6ds inte.",
@@ -31,7 +32,16 @@
         },
         "step": {
             "bluetooth_confirm": {
-                "description": "Shelly-enheten {name} har uppt\u00e4ckts via Bluetooth men \u00e4r inte ansluten till WiFi. \n\nVill du tillhandah\u00e5lla WiFi-autentiseringsuppgifter till den h\u00e4r enheten?"
+                "data": {
+                    "disable_ap": "Inaktivera WiFi-\u00e5tkomstpunkt efter installation",
+                    "disable_ble_rpc": "Inaktivera Bluetooth RPC efter installation"
+                },
+                "data_description": {
+                    "disable_ap": "F\u00f6r att f\u00f6rb\u00e4ttra s\u00e4kerheten b\u00f6r du inaktivera WiFi-\u00e5tkomstpunkten efter att du har anslutit till n\u00e4tverket.",
+                    "disable_ble_rpc": "F\u00f6r f\u00f6rb\u00e4ttrad s\u00e4kerhet, avaktivera Bluetooth RPC-\u00e5tkomst efter att WiFi har konfigurerats. Bluetooth kommer att f\u00f6rbli aktiverat f\u00f6r BLE-sensorer och -knappar."
+                },
+                "description": "Shelly-enheten {name} har uppt\u00e4ckts via Bluetooth men \u00e4r inte ansluten till WiFi. \n\nVill du tillhandah\u00e5lla WiFi-autentiseringsuppgifter till den h\u00e4r enheten?",
+                "title": "St\u00e4ll in WiFi via Bluetooth"
             },
             "confirm_discovery": {
                 "description": "Vill du konfigurera {model} p\u00e5 {host}?\n\nBatteridrivna enheter som \u00e4r l\u00f6senordsskyddade m\u00e5ste v\u00e4ckas innan du forts\u00e4tter med installationen.\nBatteridrivna enheter som inte \u00e4r l\u00f6senordsskyddade kommer att l\u00e4ggas till n\u00e4r enheten vaknar, du kan nu manuellt v\u00e4cka enheten med en knapp p\u00e5 den eller v\u00e4nta p\u00e5 n\u00e4sta datauppdatering fr\u00e5n enheten."
@@ -66,11 +76,24 @@
                 },
                 "description": "Uppdatera konfiguration f\u00f6r {device_name}.\n\nBatteridrivna enheter m\u00e5ste v\u00e4ckas innan installation, tryck p\u00e5 n\u00e5gon knapp p\u00e5 enheten f\u00f6r att v\u00e4cka den nu."
             },
+            "user": {
+                "data": {
+                    "device": "Enhet"
+                },
+                "data_description": {
+                    "device": "V\u00e4lj en uppt\u00e4ckt enhet eller ange en adress manuellt."
+                }
+            },
             "user_manual": {
                 "data": {
                     "host": "V\u00e4rd",
                     "port": "Port"
-                }
+                },
+                "data_description": {
+                    "host": "V\u00e4rdnamn eller IP-adress f\u00f6r den Shelly-enhet som du vill ansluta till.",
+                    "port": "TCP-port f\u00f6r den Shelly-enhet som ska anslutas till (Gen2+)."
+                },
+                "description": "Batteridrivna enheter m\u00e5ste v\u00e4ckas innan installation, tryck p\u00e5 en knapp p\u00e5 enheten f\u00f6r att v\u00e4cka den nu."
             },
             "wifi_scan": {
                 "data": {
@@ -79,7 +102,8 @@
                 },
                 "data_description": {
                     "ssid": "V\u00e4lj ett WiFi-n\u00e4tverk fr\u00e5n listan eller ange ett anpassat SSID f\u00f6r dolda n\u00e4tverk."
-                }
+                },
+                "description": "V\u00e4lj ett WiFi-n\u00e4tverk  och ange ett l\u00f6senord f\u00f6r att installera enheten."
             },
             "wifi_scan_failed": {
                 "description": "Det gick inte att s\u00f6ka efter WiFi-n\u00e4tverk via Bluetooth. Enheten kan vara utom r\u00e4ckh\u00e5ll eller s\u00e5 misslyckades Bluetooth-anslutningen. Vill du f\u00f6rs\u00f6ka igen?"
@@ -92,7 +116,8 @@
             "button1": "F\u00f6rsta knappen",
             "button2": "Andra knappen",
             "button3": "Tredje knappen",
-            "button4": "Fj\u00e4rde knappen"
+            "button4": "Fj\u00e4rde knappen",
+            "button5": "Femte knappen"
         },
         "trigger_type": {
             "btn_down": "{subtype} knapp nedtryckt",
@@ -114,6 +139,9 @@
             "cable_unplugged": {
                 "name": "Kabel fr\u00e5nkopplad"
             },
+            "cable_unplugged_with_channel_name": {
+                "name": "{channel_name} kabel ej ansluten"
+            },
             "calibration": {
                 "name": "Kalibrering"
             },
@@ -123,11 +151,62 @@
             "door": {
                 "name": "D\u00f6rr"
             },
+            "external_input": {
+                "name": "Extern ing\u00e5ng"
+            },
+            "external_power": {
+                "name": "Extern effekt"
+            },
+            "flood": {
+                "name": "\u00d6versv\u00e4mning"
+            },
+            "flood_with_channel_name": {
+                "name": "{channel_name} \u00f6versv\u00e4mning"
+            },
+            "input": {
+                "name": "Ing\u00e5ng"
+            },
+            "input_with_number": {
+                "name": "Ing\u00e5ng {input_number}"
+            },
             "mute": {
                 "name": "Tyst"
             },
+            "mute_with_channel_name": {
+                "name": "{channel_name} tyst"
+            },
+            "occupancy_with_channel_name": {
+                "name": "{channel_name} bel\u00e4ggning"
+            },
+            "overcurrent": {
+                "name": "\u00d6verstr\u00f6m"
+            },
+            "overcurrent_with_channel_name": {
+                "name": "{channel_name} \u00f6verstr\u00f6m"
+            },
+            "overheating": {
+                "name": "\u00d6verhettad"
+            },
+            "overheating_with_channel_name": {
+                "name": "{channel_name} \u00f6verhettad"
+            },
+            "overpowering": {
+                "name": "Effekt \u00f6verskrids"
+            },
+            "overpowering_with_channel_name": {
+                "name": "{channel_name} effekt \u00f6verskrids"
+            },
+            "overvoltage": {
+                "name": "\u00d6versp\u00e4nning"
+            },
+            "overvoltage_with_channel_name": {
+                "name": "{channel_name} \u00f6versp\u00e4nning"
+            },
             "restart_required": {
                 "name": "Omstart kr\u00e4vs"
+            },
+            "smoke_with_channel_name": {
+                "name": "{channel_name} r\u00f6k"
             }
         },
         "button": {
@@ -166,6 +245,7 @@
         },
         "event": {
             "input": {
+                "name": "Ing\u00e5ng {input_number}",
                 "state_attributes": {
                     "event_type": {
                         "state": {
@@ -193,8 +273,14 @@
             "external_temperature": {
                 "name": "Extern temperatur"
             },
+            "target_humidity": {
+                "name": "M\u00e5lfuktighet"
+            },
             "target_temperature": {
                 "name": "M\u00e5ltemperatur"
+            },
+            "valve_position": {
+                "name": "Ventill\u00e4ge"
             }
         },
         "select": {
@@ -212,12 +298,24 @@
             }
         },
         "sensor": {
+            "adc": {
+                "name": "ADC"
+            },
             "analog": {
                 "name": "Analog"
             },
             "analog_value": {
                 "name": "Analogt v\u00e4rde"
             },
+            "analog_value_with_channel_name": {
+                "name": "{channel_name} analogt v\u00e4rde"
+            },
+            "analog_with_channel_name": {
+                "name": "{channel_name} analog"
+            },
+            "apparent_power_with_channel_name": {
+                "name": "{channel_name} skenbar effekt"
+            },
             "average_temperature": {
                 "name": "Genomsnittlig temperatur"
             },
@@ -234,6 +332,12 @@
                     "charger_wait": "Laddning pausad av fordonet"
                 }
             },
+            "current_with_channel_name": {
+                "name": "{channel_name} str\u00f6m"
+            },
+            "current_with_phase_name": {
+                "name": "Fas {phase_name} str\u00f6m"
+            },
             "detected_objects": {
                 "name": "Uppt\u00e4ckta objekt",
                 "unit_of_measurement": "f\u00f6rem\u00e5l"
@@ -245,6 +349,21 @@
             "device_temperature": {
                 "name": "Enhetstemperatur"
             },
+            "energy_consumed": {
+                "name": "F\u00f6rbrukad energi"
+            },
+            "energy_consumed_with_channel_name": {
+                "name": "{channel_name} f\u00f6rbrukad energi"
+            },
+            "energy_returned": {
+                "name": "\u00c5terf\u00f6rd energi"
+            },
+            "energy_returned_with_channel_name": {
+                "name": "{channel_name} \u00e5terf\u00f6rd energi"
+            },
+            "energy_with_channel_name": {
+                "name": "{channel_name} energi"
+            },
             "frequency_with_channel_name": {
                 "name": "{channel_name} frekvens"
             },
@@ -287,6 +406,15 @@
                     "warmup": "Uppv\u00e4rmning"
                 }
             },
+            "power_factor_with_channel_name": {
+                "name": "{channel_name} effektfaktor"
+            },
+            "power_with_channel_name": {
+                "name": "{channel_name} effekt"
+            },
+            "power_with_phase_name": {
+                "name": "Fas {phase_name} effekt"
+            },
             "pulse_counter": {
                 "name": "Pulsr\u00e4knare"
             },
@@ -311,10 +439,23 @@
                     }
                 }
             },
+            "session_duration": {
+                "name": "Sessionens l\u00e4ngd"
+            },
+            "session_energy": {
+                "name": "Session energi"
+            },
             "temperature_with_channel_name": {
                 "name": "{channel_name} temperatur"
             },
+            "tilt": {
+                "name": "Lutning"
+            },
+            "valve_position": {
+                "name": "Ventill\u00e4ge"
+            },
             "valve_status": {
+                "name": "Ventilstatus",
                 "state": {
                     "checking": "Kontrollerar",
                     "closed": "St\u00e4ngd",
@@ -324,11 +465,23 @@
                     "opening": "\u00d6ppnar"
                 }
             },
+            "voltage_with_channel_name": {
+                "name": "{channel_name} sp\u00e4nning"
+            },
+            "voltage_with_phase_name": {
+                "name": "Fas {phase_name} sp\u00e4nning"
+            },
             "voltmeter": {
                 "name": "Voltmeter"
             },
+            "voltmeter_value": {
+                "name": "Voltmeterv\u00e4rde"
+            },
             "water_consumption": {
-                "name": "Vattenkonsumption"
+                "name": "Vattenf\u00f6rbrukning"
+            },
+            "water_flow_rate": {
+                "name": "Vattenfl\u00f6des"
             },
             "water_pressure": {
                 "name": "Vattentryck"
@@ -347,9 +500,20 @@
             "frost_protection": {
                 "name": "Frostskydd"
             },
+            "thermostat_enabled": {
+                "name": "Termostat aktiverad"
+            },
+            "valve_opened": {
+                "name": "Ventil \u00f6ppen"
+            },
             "zone_with_number": {
                 "name": "Zon {zone_number}"
             }
+        },
+        "update": {
+            "beta_firmware": {
+                "name": "Beta-mjukvara"
+            }
         }
     },
     "exceptions": {
@@ -412,8 +576,8 @@
         "deprecated_firmware": {
             "fix_flow": {
                 "abort": {
-                    "cannot_connect": "Misslyckades med att ansluta",
-                    "update_not_available": "Enheten erbjuder inte firmwareuppdatering. Kontrollera internetanslutningen (gateway, DNS, tid) och starta om enheten."
+                    "cannot_connect": "Det gick inte att ansluta",
+                    "update_not_available": "Enheten erbjuder inte firmwareuppdatering. Kontrollera internetanslutningen (gateway, DNS, tid) och starta sedan om enheten."
                 },
                 "step": {
                     "confirm": {
@@ -431,9 +595,20 @@
         "open_wifi_ap": {
             "fix_flow": {
                 "abort": {
-                    "cannot_connect": "Misslyckades att ansluta"
+                    "cannot_connect": "Det gick inte att ansluta"
+                },
+                "step": {
+                    "init": {
+                        "description": "Din Shelly-enhet {device_name} med IP-adress {ip_address} har en \u00f6ppen WiFi-\u00e5tkomstpunkt aktiverad utan l\u00f6senord. Detta \u00e4r en s\u00e4kerhetsrisk eftersom vem som helst i n\u00e4rheten kan ansluta till enheten. \n\nObs: Om du inaktiverar \u00e5tkomstpunkten kan enheten beh\u00f6va startas om.",
+                        "menu_options": {
+                            "confirm": "St\u00e4ng av WiFi-accesspunkt",
+                            "ignore": "Ignorera"
+                        },
+                        "title": "\u00d6ppen WiFi-accesspunkt f\u00f6r {device_name}"
+                    }
                 }
-            }
+            },
+            "title": "\u00d6ppen WiFi-accesspunkt f\u00f6r {device_name}"
         },
         "outbound_websocket_incorrectly_enabled": {
             "fix_flow": {
@@ -483,6 +658,11 @@
                 "disabled": "Inaktiverad",
                 "passive": "Passiv"
             }
+        },
+        "device": {
+            "options": {
+                "manual": "Ange adress manuellt"
+            }
         }
     }
 }

homeassistant/components/template/__init__.py

@@ -8,6 +8,11 @@ import logging
 from typing import Any
 
 from homeassistant import config as conf_util
+from homeassistant.components.automation import (
+    DOMAIN as AUTOMATION_DOMAIN,
+    NEW_TRIGGERS_CONDITIONS_FEATURE_FLAG,
+)
+from homeassistant.components.labs import async_listen as async_labs_listen
 from homeassistant.config_entries import ConfigEntry
 from homeassistant.const import (
     CONF_DEVICE_ID,
@@ -16,7 +21,7 @@ from homeassistant.const import (
     CONF_UNIQUE_ID,
     SERVICE_RELOAD,
 )
-from homeassistant.core import Event, HomeAssistant, ServiceCall
+from homeassistant.core import Event, HomeAssistant, ServiceCall, callback
 from homeassistant.exceptions import ConfigEntryError, HomeAssistantError
 from homeassistant.helpers import discovery, issue_registry as ir
 from homeassistant.helpers.device import (
@@ -90,6 +95,20 @@ async def async_setup(hass: HomeAssistant, config: ConfigType) -> bool:
 
     async_register_admin_service(hass, DOMAIN, SERVICE_RELOAD, _reload_config)
 
+    @callback
+    def new_triggers_conditions_listener() -> None:
+        """Handle new_triggers_conditions flag change."""
+        hass.async_create_task(
+            _reload_config(ServiceCall(hass, DOMAIN, SERVICE_RELOAD))
+        )
+
+    async_labs_listen(
+        hass,
+        AUTOMATION_DOMAIN,
+        NEW_TRIGGERS_CONDITIONS_FEATURE_FLAG,
+        new_triggers_conditions_listener,
+    )
+
     return True
 
 

homeassistant/components/template/helpers.py

@@ -46,6 +46,7 @@ from .const import (
     CONF_DEFAULT_ENTITY_ID,
     CONF_PICTURE,
     DOMAIN,
+    PLATFORMS,
 )
 from .entity import AbstractTemplateEntity
 from .template_entity import TemplateEntity
@@ -234,6 +235,8 @@ def create_legacy_template_issue(
     hass: HomeAssistant, config: ConfigType, domain: str
 ) -> None:
     """Create a repair for legacy template entities."""
+    if domain not in PLATFORMS:
+        return
 
     breadcrumb = "Template Entity"
     # Default entity id should be in most legacy configuration because

homeassistant/components/wled/config_flow.py

@@ -9,6 +9,7 @@ from wled import WLED, Device, WLEDConnectionError
 
 from homeassistant.components import onboarding
 from homeassistant.config_entries import (
+    SOURCE_RECONFIGURE,
     ConfigFlow,
     ConfigFlowResult,
     OptionsFlowWithReload,
@@ -16,6 +17,7 @@ from homeassistant.config_entries import (
 from homeassistant.const import CONF_HOST, CONF_MAC
 from homeassistant.core import callback
 from homeassistant.helpers.aiohttp_client import async_get_clientsession
+from homeassistant.helpers.device_registry import format_mac
 from homeassistant.helpers.service_info.zeroconf import ZeroconfServiceInfo
 
 from .const import CONF_KEEP_MAIN_LIGHT, DEFAULT_KEEP_MAIN_LIGHT, DOMAIN
@@ -52,6 +54,19 @@ class WLEDFlowHandler(ConfigFlow, domain=DOMAIN):
                 await self.async_set_unique_id(
                     device.info.mac_address, raise_on_progress=False
                 )
+                if self.source == SOURCE_RECONFIGURE:
+                    entry = self._get_reconfigure_entry()
+                    self._abort_if_unique_id_mismatch(
+                        reason="unique_id_mismatch",
+                        description_placeholders={
+                            "expected_mac": format_mac(entry.unique_id).upper(),
+                            "actual_mac": format_mac(self.unique_id).upper(),
+                        },
+                    )
+                    return self.async_update_reload_and_abort(
+                        entry,
+                        data_updates=user_input,
+                    )
                 self._abort_if_unique_id_configured(
                     updates={CONF_HOST: user_input[CONF_HOST]}
                 )
@@ -61,13 +76,26 @@ class WLEDFlowHandler(ConfigFlow, domain=DOMAIN):
                         CONF_HOST: user_input[CONF_HOST],
                     },
                 )
+        data_schema = vol.Schema({vol.Required(CONF_HOST): str})
+        if self.source == SOURCE_RECONFIGURE:
+            entry = self._get_reconfigure_entry()
+            data_schema = self.add_suggested_values_to_schema(
+                data_schema,
+                entry.data,
+            )
 
         return self.async_show_form(
             step_id="user",
-            data_schema=vol.Schema({vol.Required(CONF_HOST): str}),
+            data_schema=data_schema,
             errors=errors or {},
         )
 
+    async def async_step_reconfigure(
+        self, user_input: dict[str, Any] | None = None
+    ) -> ConfigFlowResult:
+        """Handle reconfigure flow for WLED entry."""
+        return await self.async_step_user(user_input)
+
     async def async_step_zeroconf(
         self, discovery_info: ZeroconfServiceInfo
     ) -> ConfigFlowResult:

homeassistant/components/wled/coordinator.py

@@ -14,7 +14,9 @@ from wled import (
 from homeassistant.config_entries import ConfigEntry
 from homeassistant.const import CONF_HOST, EVENT_HOMEASSISTANT_STOP
 from homeassistant.core import CALLBACK_TYPE, Event, HomeAssistant, callback
+from homeassistant.exceptions import ConfigEntryError
 from homeassistant.helpers.aiohttp_client import async_get_clientsession
+from homeassistant.helpers.device_registry import format_mac
 from homeassistant.helpers.update_coordinator import DataUpdateCoordinator, UpdateFailed
 
 from .const import (
@@ -120,6 +122,16 @@ class WLEDDataUpdateCoordinator(DataUpdateCoordinator[WLEDDevice]):
                 translation_placeholders={"error": str(error)},
             ) from error
 
+        if device.info.mac_address != self.config_entry.unique_id:
+            raise ConfigEntryError(
+                translation_domain=DOMAIN,
+                translation_key="mac_address_mismatch",
+                translation_placeholders={
+                    "expected_mac": format_mac(self.config_entry.unique_id).upper(),
+                    "actual_mac": format_mac(device.info.mac_address).upper(),
+                },
+            )
+
         # If the device supports a WebSocket, try activating it.
         if (
             device.info.websocket is not None

homeassistant/components/wled/strings.json

@@ -2,7 +2,9 @@
   "config": {
     "abort": {
       "already_configured": "[%key:common::config_flow::abort::already_configured_device%]",
-      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]"
+      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
+      "reconfigure_successful": "[%key:common::config_flow::abort::reconfigure_successful%]",
+      "unique_id_mismatch": "MAC address does not match the configured device. Expected to connect to device with MAC: `{expected_mac}`, but connected to device with MAC: `{actual_mac}`. \n\nPlease ensure you reconfigure against the same device."
     },
     "error": {
       "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]"
@@ -133,6 +135,9 @@
     },
     "invalid_response_wled_error": {
       "message": "Invalid response from WLED API: {error}"
+    },
+    "mac_address_mismatch": {
+      "message": "MAC address does not match the configured device. Expected to connect to device with MAC: {expected_mac}, but connected to device with MAC: {actual_mac}."
     }
   },
   "options": {

homeassistant/components/wled/translations/bg.json

@@ -2,7 +2,8 @@
     "config": {
         "abort": {
             "already_configured": "\u0423\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u043e\u0442\u043e \u0432\u0435\u0447\u0435 \u0435 \u043a\u043e\u043d\u0444\u0438\u0433\u0443\u0440\u0438\u0440\u0430\u043d\u043e",
-            "cannot_connect": "\u041d\u0435\u0443\u0441\u043f\u0435\u0448\u043d\u043e \u0441\u0432\u044a\u0440\u0437\u0432\u0430\u043d\u0435"
+            "cannot_connect": "\u041d\u0435\u0443\u0441\u043f\u0435\u0448\u043d\u043e \u0441\u0432\u044a\u0440\u0437\u0432\u0430\u043d\u0435",
+            "reconfigure_successful": "\u041f\u0440\u0435\u043a\u043e\u043d\u0444\u0438\u0433\u0443\u0440\u0438\u0440\u0430\u043d\u0435\u0442\u043e \u0431\u0435\u0448\u0435 \u0443\u0441\u043f\u0435\u0448\u043d\u043e"
         },
         "error": {
             "cannot_connect": "\u041d\u0435\u0443\u0441\u043f\u0435\u0448\u043d\u043e \u0441\u0432\u044a\u0440\u0437\u0432\u0430\u043d\u0435"

homeassistant/components/wled/translations/de.json

@@ -2,7 +2,9 @@
     "config": {
         "abort": {
             "already_configured": "Ger\u00e4t ist bereits konfiguriert",
-            "cannot_connect": "Verbindung fehlgeschlagen"
+            "cannot_connect": "Verbindung fehlgeschlagen",
+            "reconfigure_successful": "Die Neukonfiguration war erfolgreich",
+            "unique_id_mismatch": "Die MAC-Adresse stimmt nicht mit dem konfigurierten Ger\u00e4t \u00fcberein. Es wurde eine Verbindung mit einem Ger\u00e4t mit MAC `{expected_mac}` erwartet, aber eine Verbindung mit einem Ger\u00e4t mit MAC `{actual_mac}` hergestellt.\n\nBitte stelle sicher, dass du mit demselben Ger\u00e4t neu konfigurierst."
         },
         "error": {
             "cannot_connect": "Verbindung fehlgeschlagen"
@@ -133,6 +135,9 @@
         },
         "invalid_response_wled_error": {
             "message": "Ung\u00fcltige Antwort der WLED-API: {error}"
+        },
+        "mac_address_mismatch": {
+            "message": "Die MAC-Adresse stimmt nicht mit dem konfigurierten Ger\u00e4t \u00fcberein. Es wurde eine Verbindung mit einem Ger\u00e4t mit MAC `{expected_mac}` erwartet, aber eine Verbindung mit einem Ger\u00e4t mit MAC `{actual_mac}` hergestellt."
         }
     },
     "options": {

homeassistant/components/wled/translations/en.json

@@ -2,7 +2,9 @@
     "config": {
         "abort": {
             "already_configured": "Device is already configured",
-            "cannot_connect": "Failed to connect"
+            "cannot_connect": "Failed to connect",
+            "reconfigure_successful": "Re-configuration was successful",
+            "unique_id_mismatch": "MAC address does not match the configured device. Expected to connect to device with MAC: `{expected_mac}`, but connected to device with MAC: `{actual_mac}`. \n\nPlease ensure you reconfigure against the same device."
         },
         "error": {
             "cannot_connect": "Failed to connect"
@@ -133,6 +135,9 @@
         },
         "invalid_response_wled_error": {
             "message": "Invalid response from WLED API: {error}"
+        },
+        "mac_address_mismatch": {
+            "message": "MAC address does not match the configured device. Expected to connect to device with MAC: {expected_mac}, but connected to device with MAC: {actual_mac}."
         }
     },
     "options": {

homeassistant/components/wled/translations/et.json

@@ -2,7 +2,9 @@
     "config": {
         "abort": {
             "already_configured": "See WLED seade on juba h\u00e4\u00e4lestatud.",
-            "cannot_connect": "\u00dchendamine nurjus"
+            "cannot_connect": "\u00dchendamine nurjus",
+            "reconfigure_successful": "\u00dcmberseadistamine \u00f5nnestus",
+            "unique_id_mismatch": "MAC-aadress ei vasta konfigureeritud seadmele. Oodatakse \u00fchenduse loomist seadmega, mille MAC-aadress on: `{expected_mac}`, aga \u00fchendatud seadmega mille MAC-kood on: `{actual_mac}`. \n \n Veendu, et seadistad uuesti sama seadet."
         },
         "error": {
             "cannot_connect": "\u00dchendamine nurjus"
@@ -133,6 +135,9 @@
         },
         "invalid_response_wled_error": {
             "message": "Kehtetu vastus WLED API-lt: {error}"
+        },
+        "mac_address_mismatch": {
+            "message": "MAC-aadress ei vasta konfigureeritud seadmele. Oodatakse \u00fchenduse loomist seadmega, mille MAC-aadress on: {expected_mac}, aga \u00fchendatud seadmega mille MAC-aadress on: {actual_mac}."
         }
     },
     "options": {

homeassistant/components/wled/translations/sk.json

@@ -2,7 +2,9 @@
     "config": {
         "abort": {
             "already_configured": "Zariadenie u\u017e je nakonfigurovan\u00e9",
-            "cannot_connect": "Nepodarilo sa pripoji\u0165"
+            "cannot_connect": "Nepodarilo sa pripoji\u0165",
+            "reconfigure_successful": "Rekonfigur\u00e1cia bola \u00faspe\u0161n\u00e1",
+            "unique_id_mismatch": "Adresa MAC sa nezhoduje s nakonfigurovan\u00fdm zariaden\u00edm. O\u010dak\u00e1valo sa pripojenie k zariadeniu s MAC: `{expected_mac}`, ale pripojilo sa k zariadeniu s MAC: `{actual_mac}`. \n\nZabezpe\u010dte op\u00e4tovn\u00fa konfigur\u00e1ciu vo\u010di tomu ist\u00e9mu zariadeniu."
         },
         "error": {
             "cannot_connect": "Nepodarilo sa pripoji\u0165"
@@ -133,6 +135,9 @@
         },
         "invalid_response_wled_error": {
             "message": "Neplatn\u00e1 odpove\u010f z WLED API: {error}"
+        },
+        "mac_address_mismatch": {
+            "message": "Adresa MAC sa nezhoduje s nakonfigurovan\u00fdm zariaden\u00edm. O\u010dak\u00e1va sa pripojenie k zariadeniu s MAC: {expected_mac}, ale pripojil sa k zariadeniu s adresou MAC: {actual_mac}."
         }
     },
     "options": {