homeassistant 2025.12.0__py3-none-any.whl → 2025.12.0b1__py3-none-any.whl

homeassistant/components/mqtt/translations/cs.json

@@ -254,16 +254,16 @@
                     },
                     "data_description": {
                         "alarm_control_panel_code_mode": "Nastavuje, jak ovl\u00e1dac\u00ed panel alarmu ov\u011b\u0159uje k\u00f3d. M\u00edstn\u00ed k\u00f3d je nastaven s entitou a je ov\u011b\u0159en aplikac\u00ed Home Assistant. Vzd\u00e1len\u00fd k\u00f3d je odesl\u00e1n do za\u0159\u00edzen\u00ed a ov\u011b\u0159en na d\u00e1lku. [V\u00edce informac\u00ed]({url}#code)",
-                        "climate_feature_action": "Klimatizace podporuje informov\u00e1n\u00ed o aktu\u00e1ln\u00edm d\u011bn\u00ed.",
-                        "climate_feature_current_humidity": "Klimatizace podporuje hl\u00e1\u0161en\u00ed aktu\u00e1ln\u00ed vlhkosti.",
-                        "climate_feature_current_temperature": "Klimatizace podporuje hl\u00e1\u0161en\u00ed aktu\u00e1ln\u00ed teploty.",
-                        "climate_feature_fan_modes": "Klimatizace podporuje re\u017eimy ventil\u00e1toru.",
-                        "climate_feature_power": "Klimatizace podporuje p\u0159\u00edkazy \"on\" a \"off\".",
-                        "climate_feature_preset_modes": "Klimatizace podporuje re\u017eimy p\u0159edvoleb.",
-                        "climate_feature_swing_horizontal_modes": "Klimatizacelima podporuje re\u017eimy horizont\u00e1ln\u00edho k\u00fdv\u00e1n\u00ed.",
-                        "climate_feature_swing_modes": "Klimatizace podporuje re\u017eimy kmit\u00e1n\u00ed.",
-                        "climate_feature_target_humidity": "Klimatizace podporuje nastaven\u00ed c\u00edlov\u00e9 vlhkosti.",
-                        "climate_feature_target_temperature": "Klimatizace podporuje nastaven\u00ed c\u00edlov\u00e9 teploty.",
+                        "climate_feature_action": "Klima podporuje informov\u00e1n\u00ed o aktu\u00e1ln\u00edm d\u011bn\u00ed.",
+                        "climate_feature_current_humidity": "Klima podporuje hl\u00e1\u0161en\u00ed aktu\u00e1ln\u00ed vlhkosti.",
+                        "climate_feature_current_temperature": "Klima podporuje hl\u00e1\u0161en\u00ed aktu\u00e1ln\u00ed teploty.",
+                        "climate_feature_fan_modes": "Klima podporuje re\u017eimy ventil\u00e1toru.",
+                        "climate_feature_power": "Klima podporuje p\u0159\u00edkazy \"on\" a \"off\".",
+                        "climate_feature_preset_modes": "Klima podporuje re\u017eimy p\u0159edvoleb.",
+                        "climate_feature_swing_horizontal_modes": "Klima podporuje re\u017eimy horizont\u00e1ln\u00edho k\u00fdv\u00e1n\u00ed.",
+                        "climate_feature_swing_modes": "Klima podporuje re\u017eimy kmit\u00e1n\u00ed.",
+                        "climate_feature_target_humidity": "Klima podporuje nastaven\u00ed c\u00edlov\u00e9 vlhkosti.",
+                        "climate_feature_target_temperature": "Klima podporuje nastaven\u00ed c\u00edlov\u00e9 teploty.",
                         "device_class": "T\u0159\u00edda za\u0159\u00edzen\u00ed entity {platform}. [Dal\u0161\u00ed informace.]({url}#device_class)",
                         "entity_category": "Povol\u00ed ozna\u010den\u00ed entity jako nastaven\u00ed za\u0159\u00edzen\u00ed nebo diagnostika. Entita s kategori\u00ed nebude vystavena cloudov\u00fdm komponent\u00e1m, komponent\u00e1m Alexy ani Google Assistantovi, ani nebude zahrnuta do nep\u0159\u00edm\u00fdch vol\u00e1n\u00ed akc\u00ed pro za\u0159\u00edzen\u00ed nebo oblasti. Entit\u00e1m senzor\u016f nelze p\u0159i\u0159adit t\u0159\u00eddu nastaven\u00ed za\u0159\u00edzen\u00ed. [V\u00edce informac\u00ed]({registry_properties_url})",
                         "fan_feature_direction": "Ventil\u00e1tor podporuje sm\u011br.",
@@ -485,7 +485,7 @@
                             },
                             "data_description": {
                                 "action_template": "[\u0160ablona]({value_templating_url}) pro vykreslen\u00ed hodnoty p\u0159ijat\u00e9 v t\u00e9matu akce.",
-                                "action_topic": "T\u00e9ma MQTT pro odb\u011br zm\u011bn aktu\u00e1ln\u00ed akce. Pokud je toto nastaveno, graf klimatizace pou\u017eije p\u0159ijatou hodnotu jako zdroj dat. Hodnota \"\u017d\u00e1dn\u00e9\" resetuje aktu\u00e1ln\u00ed stav akce. Pr\u00e1zdn\u00e1 hodnota je ignorov\u00e1na. Platn\u00e9 hodnoty akc\u00ed jsou: \"off\", \"heating\", \"cooling\", \"drying\", \"idle\" a \"fan\". [V\u00edce informac\u00ed]({url}#action_topic)"
+                                "action_topic": "T\u00e9ma MQTT pro odb\u011br zm\u011bn aktu\u00e1ln\u00ed akce. Pokud je toto nastaveno, graf klimatu pou\u017eije p\u0159ijatou hodnotu jako zdroj dat. Hodnota \"\u017d\u00e1dn\u00e9\" resetuje aktu\u00e1ln\u00ed stav akce. Pr\u00e1zdn\u00e1 hodnota je ignorov\u00e1na. Platn\u00e9 hodnoty akc\u00ed jsou: \"off\", \"heating\", \"cooling\", \"drying\", \"idle\" a \"fan\". [V\u00edce informac\u00ed]({url}#action_topic)"
                             },
                             "name": "Aktu\u00e1ln\u00ed nastaven\u00ed akc\u00ed"
                         },
@@ -501,7 +501,7 @@
                                 "fan_mode_command_template": "[\u0160ablona]({command_templating_url} pro sestaven\u00ed dat, kter\u00e1 maj\u00ed b\u00fdt publikov\u00e1na v t\u00e9matu p\u0159\u00edkazu re\u017eimu ventil\u00e1toru.",
                                 "fan_mode_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f pro zm\u011bnu re\u017eimu ventil\u00e1toru klimatizace. [V\u00edce informac\u00ed]({url}#fan_mode_command_topic)",
                                 "fan_mode_state_template": "Definuje [\u0161ablonu]({value_templating_url}) pro extrakci hodnoty re\u017eimu ventil\u00e1toru klimatizace.",
-                                "fan_mode_state_topic": "T\u00e9ma MQTT se p\u0159ihl\u00e1silo k odb\u011bru informac\u00ed o re\u017eimu ventil\u00e1toru klimatizace. [V\u00edce informac\u00ed]({url}#fan_mode_state_topic)",
+                                "fan_mode_state_topic": "T\u00e9ma MQTT se p\u0159ihl\u00e1silo k odb\u011bru informac\u00ed o re\u017eimu ventil\u00e1toru klimatu. [V\u00edce informac\u00ed]({url}#fan_mode_state_topic)",
                                 "fan_modes": "Seznam re\u017eim\u016f ventil\u00e1toru, ve kter\u00fdch je tato klimatizace schopna b\u011b\u017eet. B\u011b\u017en\u00e9 re\u017eimy ventil\u00e1toru, kter\u00e9 nab\u00edzej\u00ed p\u0159evody, jsou \"off\", \"on\", \"auto\", \"low\", \"medium\", \"high\", \"middle\", \"focus\" a \"diffuse\"."
                             },
                             "name": "Nastaven\u00ed re\u017eimu ventil\u00e1toru"
@@ -517,7 +517,7 @@
                                 "payload_off": "Datov\u00e1 \u010d\u00e1st, kter\u00e1 p\u0159edstavuje stav \"off\".",
                                 "payload_on": "Datov\u00e1 \u010d\u00e1st, kter\u00e1 p\u0159edstavuje stav \"on\".",
                                 "power_command_template": "[\u0160ablona]({command_templating_url}) pro sestaven\u00ed datov\u00e9 \u010d\u00e1sti, kter\u00e1 m\u00e1 b\u00fdt publikov\u00e1na v t\u00e9matu p\u0159\u00edkazu power. Parametr \"value\" je datov\u00e1 \u010d\u00e1st nastaven\u00e1 pro datovou \u010d\u00e1st \"on\" nebo datovou \u010d\u00e1st \"off\".",
-                                "power_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f ke zm\u011bn\u011b stavu nap\u00e1jen\u00ed klimatizace. Odes\u00edl\u00e1 datovou \u010d\u00e1st nastavenou s datovou \u010d\u00e1st\u00ed \"on\" nebo \"off\". [V\u00edce informac\u00ed]({url}#power_command_topic)"
+                                "power_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f ke zm\u011bn\u011b stavu nap\u00e1jen\u00ed klimatu. Odes\u00edl\u00e1 datovou \u010d\u00e1st nastavenou s datovou \u010d\u00e1st\u00ed \"on\" nebo \"off\". [V\u00edce informac\u00ed]({url}#power_command_topic)"
                             },
                             "name": "Nastaven\u00ed nap\u00e1jen\u00ed"
                         },
@@ -531,7 +531,7 @@
                             },
                             "data_description": {
                                 "preset_mode_command_template": "[\u0160ablona]({command_templating_url}) pro sestaven\u00ed dat, kter\u00e1 maj\u00ed b\u00fdt publikov\u00e1na v t\u00e9matu p\u0159\u00edkazu p\u0159edvolby.",
-                                "preset_mode_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f pro zm\u011bnu p\u0159ednastaven\u00e9ho re\u017eimu klimatizace. [V\u00edce informac\u00ed]({url}#preset_mode_command_topic)",
+                                "preset_mode_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f pro zm\u011bnu p\u0159ednastaven\u00e9ho re\u017eimu klimatu. [V\u00edce informac\u00ed]({url}#preset_mode_command_topic)",
                                 "preset_mode_state_topic": "T\u00e9ma MQTT se p\u0159ihl\u00e1silo k odb\u011bru p\u0159edvolby ventil\u00e1toru. [V\u00edce informac\u00ed]({url}#preset_mode_state_topic)",
                                 "preset_mode_value_template": "Definuje [\u0161ablonu]({value_templating_url}) pro extrakci hodnoty p\u0159edvolby ventil\u00e1toru.",
                                 "preset_modes": "Seznam re\u017eim\u016f p\u0159edvoleb, ve kter\u00fdch je tato klimatizace schopna b\u011b\u017eet. B\u011b\u017en\u00e9 re\u017eimy p\u0159edvoleb, kter\u00e9 nab\u00edzej\u00ed p\u0159evody, jsou \"none\", \"away\", \"eco\", \"boost\", \"comfort\", \"home\", \"sleep\" a \"activity\"."
@@ -548,10 +548,10 @@
                             },
                             "data_description": {
                                 "swing_horizontal_mode_command_template": "[\u0160ablona]({command_templating_url}) pro sestaven\u00ed dat, kter\u00e1 maj\u00ed b\u00fdt publikov\u00e1na v t\u00e9matu p\u0159\u00edkazu horizont\u00e1ln\u00edho re\u017eimu k\u00fdv\u00e1n\u00ed.",
-                                "swing_horizontal_mode_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f pro zm\u011bnu re\u017eimu horizont\u00e1ln\u00edho k\u00fdv\u00e1n\u00ed klimatizace. [V\u00edce informac\u00ed]({url}#swing_horizontal_mode_command_topic)",
-                                "swing_horizontal_mode_state_template": "Definuje [\u0161ablonu]({value_templating_url}) pro extrakci hodnoty horizont\u00e1ln\u00edho re\u017eimu k\u00fdv\u00e1n\u00ed klimatizace.",
-                                "swing_horizontal_mode_state_topic": "T\u00e9ma MQTT se p\u0159ihl\u00e1silo k odb\u011bru informac\u00ed o re\u017eimu horizont\u00e1ln\u00edho k\u00fdv\u00e1n\u00ed klimatizace. [V\u00edce informac\u00ed]({url}#swing_horizontal_mode_state_topic)",
-                                "swing_horizontal_modes": "Seznam re\u017eim\u016f horizont\u00e1ln\u00edho k\u00fdv\u00e1n\u00ed, ve kter\u00fdch je tato klimatizace schopna fungovat. B\u011b\u017en\u00e9 re\u017eimy horizont\u00e1ln\u00edho k\u00fdv\u00e1n\u00ed, kter\u00e9 nab\u00edzej\u00ed p\u0159evody, jsou \"off\" a \"on\"."
+                                "swing_horizontal_mode_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f pro zm\u011bnu re\u017eimu horizont\u00e1ln\u00edho k\u00fdv\u00e1n\u00ed klimatu. [V\u00edce informac\u00ed]({url}#swing_horizontal_mode_command_topic)",
+                                "swing_horizontal_mode_state_template": "Definuje [\u0161ablonu]({value_templating_url}) pro extrakci hodnoty horizont\u00e1ln\u00edho re\u017eimu k\u00fdv\u00e1n\u00ed klimatu.",
+                                "swing_horizontal_mode_state_topic": "T\u00e9ma MQTT se p\u0159ihl\u00e1silo k odb\u011bru informac\u00ed o re\u017eimu horizont\u00e1ln\u00edho k\u00fdv\u00e1n\u00ed klimatu. [V\u00edce informac\u00ed]({url}#swing_horizontal_mode_state_topic)",
+                                "swing_horizontal_modes": "Seznam re\u017eim\u016f horizont\u00e1ln\u00edho k\u00fdv\u00e1n\u00ed, ve kter\u00fdch je toto klima schopno fungovat. B\u011b\u017en\u00e9 re\u017eimy horizont\u00e1ln\u00edho k\u00fdv\u00e1n\u00ed, kter\u00e9 nab\u00edzej\u00ed p\u0159evody, jsou \"off\" a \"on\"."
                             },
                             "name": "Nastaven\u00ed re\u017eimu horizont\u00e1ln\u00edho k\u00fdv\u00e1n\u00ed"
                         },
@@ -568,7 +568,7 @@
                                 "swing_mode_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f pro zm\u011bnu re\u017eimu k\u00fdv\u00e1n\u00ed klimy. [V\u00edce informac\u00ed]({url}#swing_mode_command_topic)",
                                 "swing_mode_state_template": "Definuje [\u0161ablonu]({value_templating_url}) pro extrakci hodnoty re\u017eimu k\u00fdv\u00e1n\u00ed klimy.",
                                 "swing_mode_state_topic": "T\u00e9ma MQTT se p\u0159ihl\u00e1silo k odb\u011bru informac\u00ed o re\u017eimu k\u00fdv\u00e1n\u00ed klimy. [V\u00edce informac\u00ed]({url}#swing_mode_state_topic)",
-                                "swing_modes": "Seznam re\u017eim\u016f k\u00fdv\u00e1n\u00ed, ve kter\u00fdch je tato klimatizace schopna fungovat. B\u011b\u017en\u00e9 re\u017eimy k\u00fdv\u00e1n\u00ed, kter\u00e9 nab\u00edzej\u00ed p\u0159evody, jsou \"off\", \"on\", \"vertical\", \"horizontal\" a \"both\"."
+                                "swing_modes": "Seznam re\u017eim\u016f k\u00fdv\u00e1n\u00ed, ve kter\u00fdch je tato klima schopna fungovat. B\u011b\u017en\u00e9 re\u017eimy k\u00fdv\u00e1n\u00ed, kter\u00e9 nab\u00edzej\u00ed p\u0159evody, jsou \"off\", \"on\", \"vertical\", \"horizontal\" a \"both\"."
                             },
                             "name": "Nastaven\u00ed re\u017eimu k\u00fdv\u00e1n\u00ed"
                         },
@@ -729,8 +729,8 @@
                             "data_description": {
                                 "payload_reset_percentage": "Speci\u00e1ln\u00ed datov\u00e1 \u010d\u00e1st, kter\u00e1 po p\u0159ijet\u00ed v t\u00e9matu procentu\u00e1ln\u00edho stavu resetuje atribut procentu\u00e1ln\u00edho stavu ot\u00e1\u010dek ventil\u00e1toru na nezn\u00e1mou hodnotu.",
                                 "percentage_command_template": "[\u0160ablona]({command_templating_url}) pro sestaven\u00ed dat, kter\u00e1 maj\u00ed b\u00fdt publikov\u00e1na v t\u00e9matu p\u0159\u00edkazu \"percentage\".",
-                                "percentage_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f pro zm\u011bnu stavu ot\u00e1\u010dek ventil\u00e1toru na z\u00e1klad\u011b procentu\u00e1ln\u00edho nastaven\u00ed. Hodnota mus\u00ed b\u00fdt v rozsahu od \"speed range min\" do \"speed range max\". [Dal\u0161\u00ed informace]({url}#percentage_command_topic)",
-                                "percentage_state_topic": "T\u00e9ma MQTT p\u0159ihl\u00e1\u0161en\u00e9 k odb\u011bru stavu ot\u00e1\u010dek ventil\u00e1toru. Jedn\u00e1 se o hodnotu v rozsahu od \"speed range min\" do \"speed range max\". [Dal\u0161\u00ed informace]({url}#percentage_state_topic)",
+                                "percentage_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f pro zm\u011bnu stavu ot\u00e1\u010dek ventil\u00e1toru na z\u00e1klad\u011b procentu\u00e1ln\u00ed hodnoty. [V\u00edce informac\u00ed]({url}#percentage_command_topic)",
+                                "percentage_state_topic": "T\u00e9ma MQTT se p\u0159ihl\u00e1silo k odb\u011bru informac\u00ed o rychlosti ventil\u00e1toru v procentech. [V\u00edce informac\u00ed]({url}#percentage_state_topic)",
                                 "percentage_value_template": "Definuje [\u0161ablonu]({value_templating_url}) pro extrakci procentu\u00e1ln\u00ed hodnoty rychlosti.",
                                 "speed_range_max": "Maxim\u00e1ln\u00ed hodnota rozsahu \u010d\u00edseln\u00e9ho v\u00fdstupu (p\u0159edstavuj\u00edc\u00ed 100  %). Procentu\u00e1ln\u00ed krok je 100 / po\u010det rychlost\u00ed v r\u00e1mci \"speed range\".",
                                 "speed_range_min": "Minim\u00e1ln\u00ed hodnota rozsahu \u010d\u00edseln\u00e9ho v\u00fdstupu (\"off\" nen\u00ed zahrnuto, tak\u017ee \"speed_range_min\" - 1 p\u0159edstavuje 0  %). Procentu\u00e1ln\u00ed krok je 100 / po\u010det rychlost\u00ed v r\u00e1mci \"speed range\"."
@@ -934,7 +934,7 @@
                                 "max_humidity": "Maxim\u00e1ln\u00ed c\u00edlov\u00e1 vlhkost, kterou lze nastavit.",
                                 "min_humidity": "Minim\u00e1ln\u00ed c\u00edlov\u00e1 vlhkost, kterou lze nastavit.",
                                 "target_humidity_command_template": "[\u0160ablona]({command_templating_url}) pro sestaven\u00ed dat, kter\u00e1 maj\u00ed b\u00fdt publikov\u00e1na v c\u00edlov\u00e9m t\u00e9matu p\u0159\u00edkazu pro vlhkost.",
-                                "target_humidity_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f pro zm\u011bnu c\u00edlov\u00e9 vlhkosti klimatizace. [V\u00edce informac\u00ed]({url}#humidity_command_topic)",
+                                "target_humidity_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f pro zm\u011bnu c\u00edlov\u00e9 vlhkosti klimatu. [V\u00edce informac\u00ed]({url}#humidity_command_topic)",
                                 "target_humidity_state_template": "[\u0160ablona]({value_templating_url}) pro vykreslen\u00ed hodnoty p\u0159ijat\u00e9 na z\u00e1klad\u011b c\u00edlov\u00e9ho stavu vlhkosti.",
                                 "target_humidity_state_topic": "T\u00e9ma MQTT pro odb\u011br zm\u011bn c\u00edlov\u00e9 vlhkosti. [V\u00edce informac\u00ed]({url}#humidity_state_topic)"
                             },
@@ -969,11 +969,11 @@
                                 "temperature_command_template": "[\u0160ablona]({command_templating_url}) pro sestaven\u00ed dat, kter\u00e1 maj\u00ed b\u00fdt publikov\u00e1na v t\u00e9matu p\u0159\u00edkazu teploty.",
                                 "temperature_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f ke zm\u011bn\u011b c\u00edlov\u00e9 teploty. [V\u00edce informac\u00ed]({url}#temperature_command_topic)",
                                 "temperature_high_command_template": "[\u0160ablona]({command_templating_url}) pro sestaven\u00ed dat, kter\u00e1 budou publikov\u00e1na v t\u00e9matu p\u0159\u00edkazu pro horn\u00ed teplotu.",
-                                "temperature_high_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f pro zm\u011bnu horn\u00ed c\u00edlov\u00e9 teploty klimatizace. [V\u00edce informac\u00ed]({url}#temperature_high_command_topic)",
+                                "temperature_high_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f pro zm\u011bnu horn\u00ed c\u00edlov\u00e9 teploty klimatu. [V\u00edce informac\u00ed]({url}#temperature_high_command_topic)",
                                 "temperature_high_state_template": "[\u0160ablona]({value_templating_url}) pro vykreslen\u00ed hodnoty p\u0159ijat\u00e9 v t\u00e9matu horn\u00edho teplotn\u00edho stavu.",
                                 "temperature_high_state_topic": "T\u00e9ma MQTT pro odb\u011br zm\u011bn horn\u00ed c\u00edlov\u00e9 teploty. [V\u00edce informac\u00ed]({url}#temperature_high_state_topic)",
                                 "temperature_low_command_template": "[\u0160ablona]({command_templating_url}) pro sestaven\u00ed dat, kter\u00e1 maj\u00ed b\u00fdt publikov\u00e1na v t\u00e9matu p\u0159\u00edkazu pro spodn\u00ed teplotu.",
-                                "temperature_low_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f pro zm\u011bnu c\u00edlov\u00e9 spodn\u00ed teploty klimatizace. [V\u00edce informac\u00ed]({url}#temperature_low_command_topic)",
+                                "temperature_low_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f pro zm\u011bnu c\u00edlov\u00e9 spodn\u00ed teploty klimatu. [V\u00edce informac\u00ed]({url}#temperature_low_command_topic)",
                                 "temperature_low_state_template": "[\u0160ablona]({value_templating_url}) pro vykreslen\u00ed hodnoty p\u0159ijat\u00e9 v t\u00e9matu stavu spodn\u00ed teploty.",
                                 "temperature_low_state_topic": "T\u00e9ma MQTT pro odb\u011br zm\u011bn spodn\u00ed c\u00edlov\u00e9 teploty. [V\u00edce informac\u00ed]({url}#temperature_low_state_topic)",
                                 "temperature_state_template": "[\u0160ablona]({value_templating_url}) pro vykreslen\u00ed hodnoty p\u0159ijat\u00e9 v t\u00e9matu spodn\u00ed teploty.",
@@ -1562,7 +1562,8 @@
     },
     "triggers": {
         "_": {
-            "description": "Spust\u00ed se po p\u0159ijet\u00ed konkr\u00e9tn\u00ed zpr\u00e1vy k dan\u00e9mu t\u00e9matu MQTT.",
+            "description": "Kdy\u017e je p\u0159ijata konkr\u00e9tn\u00ed zpr\u00e1va na dan\u00e9 t\u00e9ma MQTT.",
+            "description_configured": "Kdy\u017e byla p\u0159ijata zpr\u00e1va MQTT",
             "fields": {
                 "payload": {
                     "description": "Datov\u00e1 \u010d\u00e1st, kter\u00e1 se m\u00e1 spustit.",
@@ -1573,7 +1574,7 @@
                     "name": "T\u00e9ma"
                 }
             },
-            "name": "P\u0159ijata zpr\u00e1va MQTT"
+            "name": "MQTT"
         }
     }
 }

homeassistant/components/mqtt/translations/de.json

@@ -611,8 +611,8 @@
                                 "position_open": "Zahl, die die Position \u201ege\u00f6ffnet\u201c darstellt.",
                                 "position_template": "Definiert ein [Template]({value_templating_url}) zum Extrahieren der Payload f\u00fcr das Positions-Topic. Innerhalb des Template stehen au\u00dferdem folgende Variablen zur Verf\u00fcgung: `entity_id`, `position_open`, `position_closed`, `tilt_min` und `tilt_max`. [Weitere Informationen]({url}#position_template)",
                                 "position_topic": "Das abonnierte MQTT-Topic zum Empfang der Meldungen zum Zustand der Abdeckungsposition. [Weitere Informationen]({url}#position_topic)",
-                                "set_position_template": "[Template]({command_templating_url}) zur Definition der Position, die an das Positionseinstellung-Topic gesendet werden soll. Innerhalb des Template stehen folgende Variablen zur Verf\u00fcgung: `value` (die skalierte Sollposition), `entity_id`, `position` (die Sollposition in Prozent), `position_open`, `position_closed`, `tilt_min` und `tilt_max`. [Weitere Informationen]({url}#set_position_template)",
-                                "set_position_topic": "Das MQTT-Topic, in dem Positionsbefehle ver\u00f6ffentlicht werden. Du musst auch das Positionseinstellung-Topic verwenden, wenn du das Positions-Topic verwenden m\u00f6chtest. Verwende ein Template, wenn das Positions-Topic andere Werte als den Bereich von \u201ePosition geschlossen\u201c bis \u201ePosition ge\u00f6ffnet\u201c ben\u00f6tigt. Wenn kein Template definiert ist und die Position \u201egeschlossen\u201c != 100 und die Position \u201ege\u00f6ffnet\u201c != 0 ist, wird der korrekte Positionswert aus der prozentualen Position berechnet. [Weitere Informationen]({url}#set_position_topic)"
+                                "set_position_template": "[Template]({command_templating_url}) zur Definition der Position, die an das \u201ePosition einstellen\u201c-Topic gesendet werden soll. Innerhalb des Template stehen folgende Variablen zur Verf\u00fcgung: `value` (die skalierte Sollposition), `entity_id`, `position` (die Sollposition in Prozent), `position_open`, `position_closed`, `tilt_min` und `tilt_max`. [Weitere Informationen]({url}#set_position_template)",
+                                "set_position_topic": "Das MQTT-Topic, in dem Positionsbefehle ver\u00f6ffentlicht werden. Du musst auch das Topic \u201ePosition einstellen\u201c verwenden, wenn du das Positions-Topic verwenden m\u00f6chtest. Verwende ein Template, wenn das Positions-Topic andere Werte als den Bereich von \u201ePosition geschlossen\u201c bis \u201ePosition ge\u00f6ffnet\u201c ben\u00f6tigt. Wenn kein Template definiert ist und die Position \u201egeschlossen\u201c != 100 und die Position \u201ege\u00f6ffnet\u201c != 0 ist, wird der korrekte Positionswert aus der prozentualen Position berechnet. [Weitere Informationen]({url}#set_position_topic)"
                             },
                             "name": "Positionseinstellungen"
                         },
@@ -729,8 +729,8 @@
                             "data_description": {
                                 "payload_reset_percentage": "Eine spezielle Payload, die das Zustandsattribut der prozentualen Ventilatordrehzahl auf \u201eunbekannt\u201c zur\u00fccksetzt, wenn sie im Topic f\u00fcr den Prozentzustand empfangen wird.",
                                 "percentage_command_template": "Ein [Template]({command_templating_url}) zum Erstellen der Payload, die im Topic f\u00fcr den Prozentbefehl ver\u00f6ffentlicht werden soll.",
-                                "percentage_command_topic": "Das MQTT-Topic zum Ver\u00f6ffentlichen von Befehlen zur \u00c4nderung der Ventilatordrehzahl basierend auf einer prozentualen Einstellung. Der Wert muss im Bereich von \u201eDrehzahlbereich-Minimum\u201c bis \u201eDrehzahlbereich-Maximum\u201c liegen. [Weitere Informationen]({url}#percentage_command_topic)",
-                                "percentage_state_topic": "Das abonnierte MQTT-Topic zum Empfang der prozentualen Ventilatordrehzahl. Dies ist ein Wert im Bereich von \u201eDrehzahlbereich-Minimum\u201c bis \u201eDrehzahlbereich-Maximum\u201c. [Weitere Informationen]({url}#percentage_state_topic)",
+                                "percentage_command_topic": "Das MQTT-Topic zum Ver\u00f6ffentlichen von Befehlen zum \u00c4ndern der prozentualen Ventilatordrehzahl. [Weitere Informationen]({url}#percentage_command_topic)",
+                                "percentage_state_topic": "Das abonnierte MQTT-Topic zum Empfang der prozentualen Ventilatordrehzahl. [Weitere Informationen]({url}#percentage_state_topic)",
                                 "percentage_value_template": "Definiert ein [Template]({value_templating_url}) zum Extrahieren des Werts der prozentualen Ventilatordrehzahl.",
                                 "speed_range_max": "Das Maximum des numerischen Ausgabebereichs (entspricht 100 %). Der Prozentschritt betr\u00e4gt 100 / die Anzahl der Drehzahlen innerhalb des \u201eDrehzahlbereichs\u201c.",
                                 "speed_range_min": "Das Minimum des numerischen Ausgangsbereichs (\u201eaus\u201c nicht eingeschlossen, also speed_range_min - 1 entspricht 0 %). Der Prozentschritt betr\u00e4gt 100 / die Anzahl der Drehzahlen innerhalb des \u201eDrehzahlbereichs\u201c."
@@ -917,7 +917,7 @@
                                 "command_off_template": "Template f\u00fcr \u201eAus\u201c-Befehl"
                             },
                             "data_description": {
-                                "command_off_template": "Das [Template]({command_templating_url}) f\u00fcr Zustands\u00e4nderungen zu \u201eAus\u201c. Standardm\u00e4\u00dfig wird das \u201e[Befehls-Template]({url}#command_template)\u201c verwendet. [Weitere Informationen]({url}#command_off_template)"
+                                "command_off_template": "Das [Template]({command_templating_url}) f\u00fcr Zustands\u00e4nderungen zu \u201eAus\u201c. Standardm\u00e4\u00dfig wird das \u201e[Befehls-Template]({url}#command_template)\u201c verwendet.  [Weitere Informationen]({url}#command_off_template)"
                             },
                             "name": "Erweiterte Sireneneinstellungen"
                         },
@@ -1562,7 +1562,8 @@
     },
     "triggers": {
         "_": {
-            "description": "Wird ausgel\u00f6st, sobald eine bestimmte Nachricht zu einem bestimmten MQTT-Topic empfangen wird.",
+            "description": "Sobald eine bestimmte Nachricht zu einem angegebenen MQTT-Topic empfangen wird.",
+            "description_configured": "Sobald eine MQTT-Nachricht empfangen wurde",
             "fields": {
                 "payload": {
                     "description": "Die Payload, bei der ausgel\u00f6st werden soll.",
@@ -1573,7 +1574,7 @@
                     "name": "Topic"
                 }
             },
-            "name": "Sobald eine MQTT-Nachricht empfangen wird"
+            "name": "MQTT"
         }
     }
 }

homeassistant/components/mqtt/translations/en-GB.json

@@ -729,8 +729,8 @@
                             "data_description": {
                                 "payload_reset_percentage": "A special payload that resets the fan speed percentage state attribute to unknown when received at the percentage state topic.",
                                 "percentage_command_template": "A [template]({command_templating_url}) to compose the payload to be published at the percentage command topic.",
-                                "percentage_command_topic": "The MQTT topic to publish commands to change the fan speed state based on a percentage setting. The value shall be in the range from \"speed range min\" to \"speed range max\". [Learn more.]({url}#percentage_command_topic)",
-                                "percentage_state_topic": "The MQTT topic subscribed to receive fan speed state. This is a value in the range from \"speed range min\" to \"speed range max\". [Learn more.]({url}#percentage_state_topic)",
+                                "percentage_command_topic": "The MQTT topic to publish commands to change the fan speed state based on a percentage. [Learn more.]({url}#percentage_command_topic)",
+                                "percentage_state_topic": "The MQTT topic subscribed to receive fan speed based on percentage. [Learn more.]({url}#percentage_state_topic)",
                                 "percentage_value_template": "Defines a [template]({value_templating_url}) to extract the speed percentage value.",
                                 "speed_range_max": "The maximum of numeric output range (representing 100 %). The percentage step is 100 / number of speeds within the \"speed range\".",
                                 "speed_range_min": "The minimum of numeric output range (off not included, so speed_range_min - 1 represents 0 %). The percentage step is 100 / the number of speeds within the \"speed range\"."
@@ -1562,7 +1562,8 @@
     },
     "triggers": {
         "_": {
-            "description": "Triggers after a specific message is received on a given MQTT topic.",
+            "description": "When a specific message is received on a given MQTT topic.",
+            "description_configured": "When an MQTT message has been received",
             "fields": {
                 "payload": {
                     "description": "The payload to trigger on.",
@@ -1573,7 +1574,7 @@
                     "name": "Topic"
                 }
             },
-            "name": "MQTT message received"
+            "name": "MQTT"
         }
     }
 }

homeassistant/components/mqtt/translations/en.json

@@ -729,8 +729,8 @@
                             "data_description": {
                                 "payload_reset_percentage": "A special payload that resets the fan speed percentage state attribute to unknown when received at the percentage state topic.",
                                 "percentage_command_template": "A [template]({command_templating_url}) to compose the payload to be published at the percentage command topic.",
-                                "percentage_command_topic": "The MQTT topic to publish commands to change the fan speed state based on a percentage setting. The value shall be in the range from \"speed range min\" to \"speed range max\". [Learn more.]({url}#percentage_command_topic)",
-                                "percentage_state_topic": "The MQTT topic subscribed to receive fan speed state. This is a value in the range from \"speed range min\" to \"speed range max\". [Learn more.]({url}#percentage_state_topic)",
+                                "percentage_command_topic": "The MQTT topic to publish commands to change the fan speed state based on a percentage. [Learn more.]({url}#percentage_command_topic)",
+                                "percentage_state_topic": "The MQTT topic subscribed to receive fan speed based on percentage. [Learn more.]({url}#percentage_state_topic)",
                                 "percentage_value_template": "Defines a [template]({value_templating_url}) to extract the speed percentage value.",
                                 "speed_range_max": "The maximum of numeric output range (representing 100 %). The percentage step is 100 / number of speeds within the \"speed range\".",
                                 "speed_range_min": "The minimum of numeric output range (off not included, so speed_range_min - 1 represents 0 %). The percentage step is 100 / the number of speeds within the \"speed range\"."
@@ -1562,7 +1562,8 @@
     },
     "triggers": {
         "_": {
-            "description": "Triggers after a specific message is received on a given MQTT topic.",
+            "description": "When a specific message is received on a given MQTT topic.",
+            "description_configured": "When an MQTT message has been received",
             "fields": {
                 "payload": {
                     "description": "The payload to trigger on.",
@@ -1573,7 +1574,7 @@
                     "name": "Topic"
                 }
             },
-            "name": "MQTT message received"
+            "name": "MQTT"
         }
     }
 }

homeassistant/components/mqtt/translations/es.json

@@ -242,15 +242,12 @@
                         "fan_feature_speed": "Compatibilidad con velocidad",
                         "image_processing_mode": "Modo de procesamiento de im\u00e1genes",
                         "options": "A\u00f1adir opci\u00f3n",
-                        "reports_position": "Informa de la posici\u00f3n",
                         "schema": "Esquema",
                         "state_class": "Clase de estado",
                         "suggested_display_precision": "Precisi\u00f3n de visualizaci\u00f3n sugerida",
                         "supported_features": "Funciones compatibles",
                         "temperature_unit": "Unidad de temperatura",
-                        "unit_of_measurement": "Unidad de medida",
-                        "water_heater_feature_current_temperature": "Soporte de temperatura actual",
-                        "water_heater_feature_power": "Soporte de encendido y apagado"
+                        "unit_of_measurement": "Unidad de medida"
                     },
                     "data_description": {
                         "alarm_control_panel_code_mode": "Configura c\u00f3mo el panel de control de alarma valida el c\u00f3digo. Se configura un c\u00f3digo local con la entidad y Home Assistant lo valida. Se env\u00eda un c\u00f3digo remoto al dispositivo y se valida remotamente. [M\u00e1s informaci\u00f3n.]({url}#c\u00f3digo)",
@@ -272,15 +269,10 @@
                         "fan_feature_speed": "El ventilador admite m\u00faltiples velocidades.",
                         "image_processing_mode": "Selecciona c\u00f3mo se reciben los datos de la imagen.",
                         "options": "Opciones para los valores de estado permitidos del sensor. La clase de dispositivo del sensor debe estar configurada como Enumeraci\u00f3n. La opci\u00f3n \"Opciones\" no se puede usar junto con la clase de estado ni la unidad de medida.",
-                        "reports_position": "Selecciona esta opci\u00f3n si la v\u00e1lvula informa la posici\u00f3n o permite configurarla. Al habilitar esta opci\u00f3n, se publicar\u00e1 la posici\u00f3n en lugar de un payload definido por \"open\", \"close\" o \"stop\". Al recibir mensajes, el topic de estado aceptar\u00e1 payloads num\u00e9ricos o uno de los mensajes de estado configurados.",
                         "schema": "El esquema a utilizar. [M\u00e1s informaci\u00f3n]({url}#comparison-of-light-mqtt-schemas)",
-                        "state_class": "La [clase de estado]({available_state_classes_url}) del sensor. [M\u00e1s informaci\u00f3n.]({url}#state_class)",
                         "suggested_display_precision": "El n\u00famero de decimales que se deben usar en el estado de la entidad {platform} despu\u00e9s del redondeo. [M\u00e1s informaci\u00f3n.]({url}#suggested_display_precision)",
                         "supported_features": "Las caracter\u00edsticas que admite la entidad.",
-                        "temperature_unit": "Esto determina la unidad de medida nativa con la que trabaja el dispositivo MQTT.",
-                        "unit_of_measurement": "Define la unidad de medida, si la hay.",
-                        "water_heater_feature_current_temperature": "El calentador de agua admite la notificaci\u00f3n de la temperatura actual.",
-                        "water_heater_feature_power": "El calentador de agua admite los comandos de \"encendido\" y \"apagado\"."
+                        "unit_of_measurement": "Define la unidad de medida, si la hay."
                     },
                     "description": "Por favor, configura los detalles espec\u00edficos para la entidad \"{entity}\" de {platform}:",
                     "sections": {
@@ -362,8 +354,6 @@
                         "payload_on": "Payload \"on\"",
                         "payload_press": "Payload de \"pulsar\"",
                         "payload_reset": "Payload \"restablecer\"",
-                        "position_closed": "Posici\u00f3n \"closed\"",
-                        "position_open": "Posici\u00f3n \"open\"",
                         "qos": "QoS",
                         "red_template": "Plantilla para rojo",
                         "retain": "Retener",
@@ -404,7 +394,6 @@
                         "min": "Valor m\u00ednimo. [M\u00e1s informaci\u00f3n.]({url}#min)",
                         "mode": "Controla c\u00f3mo se debe mostrar el n\u00famero en la IU. [M\u00e1s informaci\u00f3n.]({url}#mode)",
                         "mode_command_template": "[Plantilla]({command_templating_url}) para definir el modo de operaci\u00f3n que se enviar\u00e1 al topic del comando de modo de operaci\u00f3n. [M\u00e1s informaci\u00f3n.]({url}#mode_command_template)",
-                        "mode_command_topic": "El topic MQTT para publicar comandos para cambiar el modo de funcionamiento. [M\u00e1s informaci\u00f3n]({url}#mode_command_topic)",
                         "mode_state_template": "Define una [plantilla]({value_templating_url}) para extraer el estado del modo de operaci\u00f3n. [M\u00e1s informaci\u00f3n.]({url}#mode_state_template)",
                         "mode_state_topic": "El tema MQTT al que suscribirse para recibir mensajes de estado del modo de operaci\u00f3n. [M\u00e1s informaci\u00f3n.]({url}#mode_state_topic)",
                         "modes": "Lista de modos de operaci\u00f3n compatibles. [M\u00e1s informaci\u00f3n.]({url}#modes)",
@@ -415,8 +404,6 @@
                         "payload_on": "El payload que representa el estado \"encendido\".",
                         "payload_press": "El payload que se enviar\u00e1 cuando se dispare el bot\u00f3n.",
                         "payload_reset": "El payload recibido en el topic de estado que restablece la entidad a un estado desconocido.",
-                        "position_closed": "N\u00famero que representa la posici\u00f3n cerrada. La posici\u00f3n de la v\u00e1lvula se ajustar\u00e1 al rango (posici\u00f3n \"cerrada\"\u2026posici\u00f3n \"abierta\") al realizar una acci\u00f3n y se ajustar\u00e1 al recibir un valor.",
-                        "position_open": "N\u00famero que representa la posici\u00f3n abierta. La posici\u00f3n de la v\u00e1lvula se ajustar\u00e1 al rango (posici\u00f3n \"cerrada\"\u2026posici\u00f3n \"abierta\") al realizar una acci\u00f3n y se ajustar\u00e1 al recibir un valor.",
                         "qos": "El valor de QoS que debe utilizar una entidad {platform}.",
                         "red_template": "[Plantilla]({value_templating_url}) para extraer el color rojo del valor del payload del estado. El resultado esperado de la plantilla es un entero entre 0 y 255.",
                         "retain": "Selecciona si los valores publicados por la entidad {platform} deben conservarse en el br\u00f3ker MQTT.",
@@ -729,8 +716,8 @@
                             "data_description": {
                                 "payload_reset_percentage": "Un payload especial que restablece el atributo de estado de porcentaje de velocidad del ventilador a desconocido cuando se recibe en el topic de estado de porcentaje.",
                                 "percentage_command_template": "Una [plantilla]({command_templating_url}) para componer el payload que se publicar\u00e1 en el topic del comando de porcentaje.",
-                                "percentage_command_topic": "El topic MQTT para publicar comandos para cambiar el estado de la velocidad del ventilador seg\u00fan un porcentaje. El valor debe estar en el rango de velocidad m\u00ednima a m\u00e1xima. [M\u00e1s informaci\u00f3n.]({url}#percentage_command_topic)",
-                                "percentage_state_topic": "El topic MQTT al que suscribirse para recibir el estado de la velocidad del ventilador. Este valor oscila entre \"rango de velocidad m\u00ednimo\" y \"rango de velocidad m\u00e1ximo\". [M\u00e1s informaci\u00f3n].({url}#percentage_state_topic)",
+                                "percentage_command_topic": "El topic MQTT para publicar comandos para cambiar el estado de velocidad del ventilador en funci\u00f3n de un porcentaje. [M\u00e1s informaci\u00f3n.]({url}#percentage_command_topic)",
+                                "percentage_state_topic": "El topic MQTT al que suscribirse para recibir informaci\u00f3n sobre la velocidad del ventilador en porcentaje. [M\u00e1s informaci\u00f3n.]({url}#percentage_state_topic)",
                                 "percentage_value_template": "Define una [plantilla]({value_templating_url}) para extraer el valor del porcentaje de velocidad.",
                                 "speed_range_max": "El m\u00e1ximo del rango de salida num\u00e9rica (que representa el 100 %). El incremento porcentual es 100/n\u00famero de velocidades dentro del rango de velocidad.",
                                 "speed_range_min": "El m\u00ednimo del rango de salida num\u00e9rica (no se incluye la desactivaci\u00f3n, por lo que speed_range_min - 1 representa el 0 %). El incremento porcentual es 100 / el n\u00famero de velocidades dentro del rango de velocidad."
@@ -961,13 +948,11 @@
                                 "temperature_state_topic": "Topic del estado de temperatura"
                             },
                             "data_description": {
-                                "initial": "El dispositivo se inicializa con esta temperatura deseada.",
                                 "max_temp": "La temperatura objetivo m\u00e1xima que se puede establecer.",
                                 "min_temp": "La temperatura objetivo m\u00ednima que se puede establecer.",
                                 "precision": "La precisi\u00f3n en grados con la que trabaja el termostato.",
                                 "temp_step": "El paso de temperatura objetivo en grados Celsius o Fahrenheit.",
                                 "temperature_command_template": "Una [plantilla]({command_templating_url}) para componer el payload que se publicar\u00e1 en el topic del comando de temperatura.",
-                                "temperature_command_topic": "El topic MQTT para publicar comandos para cambiar la temperatura deseada. [M\u00e1s informaci\u00f3n]({url}#temperature_command_topic)",
                                 "temperature_high_command_template": "Una [plantilla]({command_templating_url}) para componer el payload que se publicar\u00e1 en el topic de comando de temperatura superior.",
                                 "temperature_high_command_topic": "El topic MQTT para publicar comandos para cambiar la temperatura objetivo superior del clima. [M\u00e1s informaci\u00f3n.]({url}#temperature_high_command_topic)",
                                 "temperature_high_state_template": "Una [plantilla]({value_templating_url}) para representar el valor recibido en el topic del estado de temperatura superior.",
@@ -981,56 +966,8 @@
                             },
                             "name": "Configuraci\u00f3n de temperatura objetivo"
                         },
-                        "text_advanced_settings": {
-                            "data": {
-                                "max": "Longitud m\u00e1xima",
-                                "min": "Longitud m\u00ednima",
-                                "mode": "Modo",
-                                "pattern": "Patr\u00f3n"
-                            },
-                            "data_description": {
-                                "max": "Longitud m\u00e1xima de la entrada de texto",
-                                "min": "Longitud m\u00ednima del texto de entrada",
-                                "mode": "Modo de entrada de texto",
-                                "pattern": "Un patr\u00f3n de expresi\u00f3n regular v\u00e1lido"
-                            },
-                            "name": "Configuraci\u00f3n avanzada de entidades de texto"
-                        },
                         "valve_payload_settings": {
-                            "data": {
-                                "payload_close": "Payload \"close\"",
-                                "payload_open": "Payload \"open\"",
-                                "payload_stop": "Payload \"stop\"",
-                                "state_closed": "Estado \"closed\"",
-                                "state_closing": "Estado \"closing\"",
-                                "state_open": "Estado \"open\"",
-                                "state_opening": "Estado \"opening\""
-                            },
-                            "data_description": {
-                                "payload_close": "El payload que se env\u00eda cuando se emite un comando \"close\".",
-                                "payload_open": "El payload que se env\u00eda cuando se emite un comando \"open\".",
-                                "payload_stop": "El payload que se env\u00eda al emitir un comando de parada. Configura este payload solo si tu v\u00e1lvula admite la acci\u00f3n de parada.",
-                                "state_closed": "El payload recibido en el topic de estado que representa el estado \"cerrado\".",
-                                "state_closing": "El payload recibido en el topic de estado que representa el estado de \"cierre\".",
-                                "state_open": "El payload recibido en el topic de estado que representa el estado \"abierto\".",
-                                "state_opening": "El payload recibido en el topic de estado que representa el estado de \"apertura\"."
-                            },
                             "name": "Configuraci\u00f3n del payload de la v\u00e1lvula"
-                        },
-                        "water_heater_power_settings": {
-                            "data": {
-                                "payload_off": "Payload \"off\"",
-                                "payload_on": "Payload \"on\"",
-                                "power_command_template": "Plantilla de comando de energ\u00eda",
-                                "power_command_topic": "Topic del comando de energ\u00eda"
-                            },
-                            "data_description": {
-                                "payload_off": "El payload que representa el estado \"apagado\".",
-                                "payload_on": "El payload que representa el estado \"encendido\".",
-                                "power_command_template": "Una [plantilla]({command_templating_url}) para componer el payload que se publicar\u00e1 en el topic del comando de encendido. El par\u00e1metro `value` es el payload configurado para 'encendido' o 'apagado'.",
-                                "power_command_topic": "El topic MQTT para publicar comandos para cambiar el estado de energ\u00eda del calentador de agua. Env\u00eda el payload configurado con \"on\" u \"off\". [M\u00e1s informaci\u00f3n.]({url}#power_command_topic)"
-                            },
-                            "name": "Configuraci\u00f3n de energ\u00eda"
                         }
                     },
                     "title": "Configurar el dispositivo MQTT \"{mqtt_device}\""
@@ -1373,7 +1310,6 @@
                 "speed": "Velocidad",
                 "sulphur_dioxide": "Di\u00f3xido de azufre",
                 "temperature": "Temperatura",
-                "temperature_delta": "Delta de temperatura",
                 "timestamp": "Marca de tiempo",
                 "volatile_organic_compounds": "Compuestos org\u00e1nicos vol\u00e1tiles",
                 "volatile_organic_compounds_parts": "Partes de compuestos org\u00e1nicos vol\u00e1tiles",
@@ -1455,9 +1391,7 @@
                 "sensor": "Sensor",
                 "siren": "Sirena",
                 "switch": "Interruptor",
-                "text": "Texto",
-                "valve": "V\u00e1lvula",
-                "water_heater": "Calentador de agua"
+                "valve": "V\u00e1lvula"
             }
         },
         "set_ca_cert": {
@@ -1494,24 +1428,6 @@
                 "none": "No hay temperatura objetivo",
                 "single": "Temperatura objetivo \u00fanica"
             }
-        },
-        "text_mode": {
-            "options": {
-                "password": "Contrase\u00f1a",
-                "text": "Texto"
-            }
-        },
-        "water_heater_modes": {
-            "options": {
-                "auto": "Auto",
-                "eco": "Eco",
-                "electric": "El\u00e9ctrico",
-                "gas": "Gas",
-                "heat_pump": "Bomba de calor",
-                "high_demand": "Alta demanda",
-                "off": "Apagado",
-                "performance": "Rendimiento"
-            }
         }
     },
     "services": {
@@ -1562,7 +1478,8 @@
     },
     "triggers": {
         "_": {
-            "description": "Se dispara despu\u00e9s de que se recibe un mensaje espec\u00edfico en un topic MQTT determinado.",
+            "description": "Cuando se recibe un mensaje espec\u00edfico sobre un tema MQTT determinado.",
+            "description_configured": "Cuando se ha recibido un mensaje MQTT",
             "fields": {
                 "payload": {
                     "description": "El payload en el que dispararse.",
@@ -1573,7 +1490,7 @@
                     "name": "Topic"
                 }
             },
-            "name": "Mensaje MQTT recibido"
+            "name": "MQTT"
         }
     }
 }

homeassistant/components/mqtt/translations/et.json

@@ -729,8 +729,8 @@
                             "data_description": {
                                 "payload_reset_percentage": "Spetsiaalne kasulik koormus, mis l\u00e4htestab ventilaatori kiiruse protsentuaalse oleku atribuudi tundmatuks, kui see v\u00f5etakse vastu protsentuaalse oleku teemas.",
                                 "percentage_command_template": "[template]( {command_templating_url} ) k\u00e4su protsenditeema juures avaldatava kasuliku koormuse koostamiseks.",
-                                "percentage_command_topic": "MQTT-teema k\u00e4skude avaldamiseks, et muuta ventilaatori kiiruse olekut protsentuaalse seadistuse alusel. V\u00e4\u00e4rtus peab olema vahemikus \"speed range min\" kuni \"speed range max\". [Lisateave.]({url}#percentage_command_topic)",
-                                "percentage_state_topic": "MQTT-teema, mis on tellitud ventilaatori kiiruse seisundi vastuv\u00f5tmiseks. See on v\u00e4\u00e4rtus vahemikus \"speed range min\" kuni \"speed range max\". [Lisateave.]({url}#percentage_state_topic)",
+                                "percentage_command_topic": "MQTT teema k\u00e4skude avaldamiseks ventilaatori kiiruse oleku muutmiseks protsendi alusel. [Lisateave.]({url}#percentage_command_topic)",
+                                "percentage_state_topic": "MQTT-teema, mis on tellitud ventilaatori kiiruse vastuv\u00f5tmiseks protsendi alusel. [Lisateave.]({url}#percentage_state_topic)",
                                 "percentage_value_template": "M\u00e4\u00e4ratleb [malli]({value_templating_url}), et eraldada kiiruse protsent.",
                                 "speed_range_max": "Numbrilise v\u00e4ljundvahemiku maksimum (vastab 100 %-le). Protsentuaalne samm on 100 / kiiruste arv \"kiirusvahemikus\".",
                                 "speed_range_min": "Numbrilise v\u00e4ljundvahemiku miinimum (v\u00e4lja l\u00fclitatud ei ole, nii et speed_range_min - 1 t\u00e4hendab 0 %). Protsentuaalne samm on 100 / kiiruste arv \"kiirusvahemikus\"."
@@ -1562,7 +1562,8 @@
     },
     "triggers": {
         "_": {
-            "description": "K\u00e4ivitub p\u00e4rast konkreetse s\u00f5numi saamist antud MQTT-teemasse.",
+            "description": "Kui antud MQTT teema kohta saadakse konkreetne s\u00f5num.",
+            "description_configured": "Kui MQTT s\u00f5num on vastu v\u00f5etud",
             "fields": {
                 "payload": {
                     "description": "K\u00e4ivitav kasulik koormus.",
@@ -1573,7 +1574,7 @@
                     "name": "Teema"
                 }
             },
-            "name": "Saadud MQTT-teade"
+            "name": "MQTT"
         }
     }
 }

homeassistant/components/mqtt/translations/fr.json

@@ -873,6 +873,8 @@
     },
     "triggers": {
         "_": {
+            "description": "Quand un message sp\u00e9cifique est re\u00e7u sur un sujet MQTT donn\u00e9.",
+            "description_configured": "Lorsqu'un message MQTT est re\u00e7u",
             "fields": {
                 "payload": {
                     "description": "Le message MQTT utilis\u00e9 comme d\u00e9clencheur",
@@ -882,7 +884,8 @@
                     "description": "Sujet MQTT \u00e0 \u00e9couter.",
                     "name": "Sujet"
                 }
-            }
+            },
+            "name": "MQTT"
         }
     }
 }