homeassistant 2025.10.3__py3-none-any.whl → 2025.11.0b0__py3-none-any.whl

homeassistant/components/zha/strings.json

@@ -1,306 +1,163 @@
 {
   "config": {
+    "abort": {
+      "cannot_resolve_path": "Could not resolve device path: {path}",
+      "cannot_restore_backup": "The adapter you are restoring to does not properly support backup restoration. Please upgrade the firmware.\n\nError: {error}",
+      "cannot_restore_backup_no_ieee_confirm": "The adapter you are restoring to has outdated firmware and cannot write the adapter IEEE address multiple times. Please upgrade the firmware or confirm permanent overwrite in the previous step.",
+      "invalid_zeroconf_data": "The coordinator has invalid Zeroconf service info and cannot be identified by ZHA",
+      "not_zha_device": "This device is not a ZHA device",
+      "reconfigure_successful": "ZHA has successfully migrated from your old adapter to the new one. Give your Zigbee network a few minutes to stabilize.\n\nIf you no longer need the old adapter, you can now unplug it.",
+      "single_instance_allowed": "[%key:common::config_flow::abort::single_instance_allowed%]",
+      "usb_probe_failed": "Failed to probe the USB device",
+      "wrong_firmware_installed": "Your device is running the wrong firmware and cannot be used with ZHA until the correct firmware is installed. [A repair has been created]({repair_url}) with more information and instructions for how to fix this."
+    },
+    "error": {
+      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
+      "invalid_backup_json": "Invalid backup JSON"
+    },
     "flow_title": "{name}",
     "step": {
-      "choose_serial_port": {
-        "title": "Select a serial port",
-        "description": "Select the serial port for your Zigbee adapter",
-        "data": {
-          "path": "Serial device path"
-        }
-      },
-      "confirm": {
-        "description": "Do you want to set up {name}?"
-      },
-      "confirm_hardware": {
-        "description": "Do you want to set up {name}?"
-      },
-      "manual_pick_radio_type": {
-        "title": "Select an adapter type",
-        "description": "Pick your Zigbee adapter type",
-        "data": {
-          "radio_type": "Adapter type"
-        }
-      },
-      "manual_port_config": {
-        "title": "Serial port settings",
-        "description": "ZHA was not able to automatically detect serial port settings for your adapter. This usually is an issue with the firmware or permissions.\n\nIf you are using firmware with nonstandard settings, enter the serial port settings",
+      "choose_automatic_backup": {
         "data": {
-          "path": "Serial device path",
-          "baudrate": "Serial port speed",
-          "flow_control": "Serial port flow control"
-        },
-        "data_description": {
-          "path": "Path to the serial port or `socket://` TCP address",
-          "baudrate": "Baudrate to use when communicating with the serial port, usually 115200 or 460800",
-          "flow_control": "Check your adapter's documentation for the correct option, usually `None` or `Hardware`"
-        }
-      },
-      "verify_radio": {
-        "title": "Adapter is not recommended",
-        "description": "The adapter you are using ({name}) is not recommended and support for it may be removed in the future. Please see the Zigbee Home Automation integration's documentation for [a list of recommended adapters]({docs_recommended_adapters_url})."
-      },
-      "choose_setup_strategy": {
-        "title": "Set up Zigbee",
-        "description": "Choose how you want to set up Zigbee. Automatic setup is recommended unless you are restoring your network from a backup or setting up an adapter with nonstandard settings.",
-        "menu_options": {
-          "setup_strategy_recommended": "Set up automatically (recommended)",
-          "setup_strategy_advanced": "Advanced setup"
-        },
-        "menu_option_descriptions": {
-          "setup_strategy_recommended": "This is the quickest option to create a new network and get started.",
-          "setup_strategy_advanced": "This will let you restore from a backup."
-        }
-      },
-      "choose_migration_strategy": {
-        "title": "Migrate to a new adapter",
-        "description": "Choose how you want to migrate your Zigbee network backup from your old adapter to a new one.",
-        "menu_options": {
-          "migration_strategy_recommended": "Migrate automatically (recommended)",
-          "migration_strategy_advanced": "Advanced migration"
+          "choose_automatic_backup": "Choose an automatic backup"
         },
-        "menu_option_descriptions": {
-          "migration_strategy_recommended": "This is the quickest option to migrate to a new adapter.",
-          "migration_strategy_advanced": "This will let you restore a specific network backup or upload your own."
-        }
-      },
-      "maybe_reset_old_radio": {
-        "title": "Resetting old adapter",
-        "description": "A backup was created earlier and your old adapter is being reset as part of the migration."
+        "description": "Restore your network settings from an automatic backup",
+        "title": "Restore automatic backup"
       },
       "choose_formation_strategy": {
-        "title": "Network formation",
         "description": "Choose the network settings for your adapter.",
+        "menu_option_descriptions": {
+          "choose_automatic_backup": "This will let you change your adapter's network settings back to a previous state, in case you have changed them.",
+          "form_initial_network": "[%key:component::zha::config::step::choose_formation_strategy::menu_option_descriptions::form_new_network%]",
+          "form_new_network": "This will create a new Zigbee network.",
+          "reuse_settings": "This will let ZHA import the settings from a stick that was used with other software, migrating some of the network automatically.",
+          "upload_manual_backup": "This will let you upload a backup JSON file from ZHA or the Zigbee2MQTT `coordinator_backup.json` file."
+        },
         "menu_options": {
-          "form_new_network": "Erase network settings and create a new network",
+          "choose_automatic_backup": "Restore an automatic backup",
           "form_initial_network": "Create a network",
+          "form_new_network": "Erase network settings and create a new network",
           "reuse_settings": "Keep adapter network settings",
-          "choose_automatic_backup": "Restore an automatic backup",
           "upload_manual_backup": "Upload a manual backup"
         },
-        "menu_option_descriptions": {
-          "form_new_network": "This will create a new Zigbee network.",
-          "form_initial_network": "[%key:component::zha::config::step::choose_formation_strategy::menu_option_descriptions::form_new_network%]",
-          "reuse_settings": "This will let ZHA import the settings from a stick that was used with other software, migrating some of the network automatically.",
-          "choose_automatic_backup": "This will let you change your adapter's network settings back to a previous state, in case you have changed them.",
-          "upload_manual_backup": "This will let you upload a backup JSON file from ZHA or the Zigbee2MQTT `coordinator_backup.json` file."
-        }
-      },
-      "choose_automatic_backup": {
-        "title": "Restore automatic backup",
-        "description": "Restore your network settings from an automatic backup",
-        "data": {
-          "choose_automatic_backup": "Choose an automatic backup"
-        }
+        "title": "Network formation"
       },
-      "upload_manual_backup": {
-        "title": "Upload a manual backup",
-        "description": "Restore your network settings from an uploaded backup JSON file. You can download one from a different ZHA installation from **Network Settings**, or use a Zigbee2MQTT `coordinator_backup.json` file.",
-        "data": {
-          "uploaded_backup_file": "Upload a file"
-        }
+      "choose_migration_strategy": {
+        "description": "Choose how you want to migrate your Zigbee network backup from your old adapter to a new one.",
+        "menu_option_descriptions": {
+          "migration_strategy_advanced": "This will let you restore a specific network backup or upload your own.",
+          "migration_strategy_recommended": "This is the quickest option to migrate to a new adapter."
+        },
+        "menu_options": {
+          "migration_strategy_advanced": "Advanced migration",
+          "migration_strategy_recommended": "Migrate automatically (recommended)"
+        },
+        "title": "Migrate to a new adapter"
       },
-      "maybe_confirm_ezsp_restore": {
-        "title": "Overwrite adapter IEEE address",
-        "description": "Your backup has a different IEEE address than your adapter. For your network to function properly, the IEEE address of your adapter should also be changed.\n\nThis is a permanent operation.",
+      "choose_serial_port": {
         "data": {
-          "overwrite_coordinator_ieee": "Permanently replace the adapter IEEE address"
-        }
-      }
-    },
-    "error": {
-      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
-      "invalid_backup_json": "Invalid backup JSON"
-    },
-    "abort": {
-      "single_instance_allowed": "[%key:common::config_flow::abort::single_instance_allowed%]",
-      "not_zha_device": "This device is not a ZHA device",
-      "usb_probe_failed": "Failed to probe the USB device",
-      "cannot_resolve_path": "Could not resolve device path: {path}",
-      "wrong_firmware_installed": "Your device is running the wrong firmware and cannot be used with ZHA until the correct firmware is installed. [A repair has been created]({repair_url}) with more information and instructions for how to fix this.",
-      "invalid_zeroconf_data": "The coordinator has invalid Zeroconf service info and cannot be identified by ZHA",
-      "cannot_restore_backup": "The adapter you are restoring to does not properly support backup restoration. Please upgrade the firmware.\n\nError: {error}",
-      "cannot_restore_backup_no_ieee_confirm": "The adapter you are restoring to has outdated firmware and cannot write the adapter IEEE address multiple times. Please upgrade the firmware or confirm permanent overwrite in the previous step.",
-      "reconfigure_successful": "ZHA has successfully migrated from your old adapter to the new one. Give your Zigbee network a few minutes to stabilize.\n\nIf you no longer need the old adapter, you can now unplug it."
-    }
-  },
-  "options": {
-    "flow_title": "[%key:component::zha::config::flow_title%]",
-    "step": {
-      "init": {
-        "title": "Reconfigure ZHA",
-        "description": "A backup will be performed and ZHA will be stopped. Do you wish to continue?"
+          "path": "Serial device path"
+        },
+        "description": "Select the serial port for your Zigbee adapter",
+        "title": "Select a serial port"
       },
-      "prompt_migrate_or_reconfigure": {
-        "title": "Migrate or re-configure",
-        "description": "Are you migrating to a new adapter or re-configuring the current adapter?",
+      "choose_setup_strategy": {
+        "description": "Choose how you want to set up Zigbee. Automatic setup is recommended unless you are restoring your network from a backup or setting up an adapter with nonstandard settings.",
+        "menu_option_descriptions": {
+          "setup_strategy_advanced": "This will let you restore from a backup.",
+          "setup_strategy_recommended": "This is the quickest option to create a new network and get started."
+        },
         "menu_options": {
-          "intent_migrate": "Migrate to a new adapter",
-          "intent_reconfigure": "Re-configure the current adapter"
+          "setup_strategy_advanced": "Advanced setup",
+          "setup_strategy_recommended": "Set up automatically (recommended)"
         },
-        "menu_option_descriptions": {
-          "intent_migrate": "This will help you migrate your Zigbee network from your old adapter to a new one.",
-          "intent_reconfigure": "This will let you change the serial port for your current Zigbee adapter."
-        }
+        "title": "Set up Zigbee"
       },
-      "intent_migrate": {
-        "title": "[%key:component::zha::options::step::prompt_migrate_or_reconfigure::menu_options::intent_migrate%]",
-        "description": "Before plugging in your new adapter, your old adapter needs to be reset. An automatic backup will be performed. If you are using a combined Z-Wave and Zigbee adapter like the HUSBZB-1, this will only reset the Zigbee portion.\n\n*Note: if you are migrating from a **ConBee/RaspBee**, make sure it is running firmware `0x26720700` or newer! Otherwise, some devices may not be controllable after migrating until they are power cycled.*\n\nDo you wish to continue?"
+      "confirm": {
+        "description": "Do you want to set up {name}?"
       },
-      "choose_serial_port": {
-        "title": "[%key:component::zha::config::step::choose_serial_port::title%]",
-        "data": {
-          "path": "[%key:component::zha::config::step::choose_serial_port::data::path%]"
-        },
-        "description": "[%key:component::zha::config::step::choose_serial_port::description%]"
+      "confirm_hardware": {
+        "description": "Do you want to set up {name}?"
       },
       "manual_pick_radio_type": {
         "data": {
-          "radio_type": "[%key:component::zha::config::step::manual_pick_radio_type::data::radio_type%]"
+          "radio_type": "Adapter type"
         },
-        "title": "[%key:component::zha::config::step::manual_pick_radio_type::data::radio_type%]",
-        "description": "[%key:component::zha::config::step::manual_pick_radio_type::description%]"
+        "description": "Pick your Zigbee adapter type",
+        "title": "Select an adapter type"
       },
       "manual_port_config": {
-        "title": "[%key:component::zha::config::step::manual_port_config::title%]",
-        "description": "[%key:component::zha::config::step::manual_port_config::description%]",
         "data": {
-          "path": "[%key:component::zha::config::step::manual_port_config::data::path%]",
-          "baudrate": "[%key:component::zha::config::step::manual_port_config::data::baudrate%]",
-          "flow_control": "[%key:component::zha::config::step::manual_port_config::data::flow_control%]"
-        }
-      },
-      "verify_radio": {
-        "title": "[%key:component::zha::config::step::verify_radio::title%]",
-        "description": "[%key:component::zha::config::step::verify_radio::description%]"
-      },
-      "choose_migration_strategy": {
-        "title": "[%key:component::zha::config::step::choose_migration_strategy::title%]",
-        "description": "[%key:component::zha::config::step::choose_migration_strategy::description%]",
-        "menu_options": {
-          "migration_strategy_recommended": "[%key:component::zha::config::step::choose_migration_strategy::menu_options::migration_strategy_recommended%]",
-          "migration_strategy_advanced": "[%key:component::zha::config::step::choose_migration_strategy::menu_options::migration_strategy_advanced%]"
+          "baudrate": "Serial port speed",
+          "flow_control": "Serial port flow control",
+          "path": "Serial device path"
         },
-        "menu_option_descriptions": {
-          "migration_strategy_recommended": "[%key:component::zha::config::step::choose_migration_strategy::menu_option_descriptions::migration_strategy_recommended%]",
-          "migration_strategy_advanced": "[%key:component::zha::config::step::choose_migration_strategy::menu_option_descriptions::migration_strategy_advanced%]"
-        }
-      },
-      "choose_formation_strategy": {
-        "title": "[%key:component::zha::config::step::choose_formation_strategy::title%]",
-        "description": "[%key:component::zha::config::step::choose_formation_strategy::description%]",
-        "menu_options": {
-          "form_new_network": "[%key:component::zha::config::step::choose_formation_strategy::menu_options::form_new_network%]",
-          "form_initial_network": "[%key:component::zha::config::step::choose_formation_strategy::menu_options::form_initial_network%]",
-          "reuse_settings": "[%key:component::zha::config::step::choose_formation_strategy::menu_options::reuse_settings%]",
-          "choose_automatic_backup": "[%key:component::zha::config::step::choose_formation_strategy::menu_options::choose_automatic_backup%]",
-          "upload_manual_backup": "[%key:component::zha::config::step::choose_formation_strategy::menu_options::upload_manual_backup%]"
+        "data_description": {
+          "baudrate": "Baudrate to use when communicating with the serial port, usually 115200 or 460800",
+          "flow_control": "Check your adapter's documentation for the correct option, usually `None` or `Hardware`",
+          "path": "Path to the serial port or `socket://` TCP address"
         },
-        "menu_option_descriptions": {
-          "form_new_network": "[%key:component::zha::config::step::choose_formation_strategy::menu_option_descriptions::form_new_network%]",
-          "form_initial_network": "[%key:component::zha::config::step::choose_formation_strategy::menu_option_descriptions::form_new_network%]",
-          "reuse_settings": "[%key:component::zha::config::step::choose_formation_strategy::menu_option_descriptions::reuse_settings%]",
-          "choose_automatic_backup": "[%key:component::zha::config::step::choose_formation_strategy::menu_option_descriptions::choose_automatic_backup%]",
-          "upload_manual_backup": "[%key:component::zha::config::step::choose_formation_strategy::menu_option_descriptions::upload_manual_backup%]"
-        }
+        "description": "ZHA was not able to automatically detect serial port settings for your adapter. This usually is an issue with the firmware or permissions.\n\nIf you are using firmware with nonstandard settings, enter the serial port settings",
+        "title": "Serial port settings"
       },
-      "choose_automatic_backup": {
-        "title": "[%key:component::zha::config::step::choose_automatic_backup::title%]",
-        "description": "[%key:component::zha::config::step::choose_automatic_backup::description%]",
+      "maybe_confirm_ezsp_restore": {
         "data": {
-          "choose_automatic_backup": "[%key:component::zha::config::step::choose_automatic_backup::data::choose_automatic_backup%]"
-        }
+          "overwrite_coordinator_ieee": "Permanently replace the adapter IEEE address"
+        },
+        "description": "Your backup has a different IEEE address than your adapter. For your network to function properly, the IEEE address of your adapter should also be changed.\n\nThis is a permanent operation.",
+        "title": "Overwrite adapter IEEE address"
+      },
+      "maybe_reset_old_radio": {
+        "description": "A backup was created earlier and your old adapter is being reset as part of the migration.",
+        "title": "Resetting old adapter"
       },
       "upload_manual_backup": {
-        "title": "[%key:component::zha::config::step::upload_manual_backup::title%]",
-        "description": "[%key:component::zha::config::step::upload_manual_backup::description%]",
         "data": {
-          "uploaded_backup_file": "[%key:component::zha::config::step::upload_manual_backup::data::uploaded_backup_file%]"
-        }
+          "uploaded_backup_file": "Upload a file"
+        },
+        "description": "Restore your network settings from an uploaded backup JSON file. You can download one from a different ZHA installation from **Network Settings**, or use a Zigbee2MQTT `coordinator_backup.json` file.",
+        "title": "Upload a manual backup"
       },
-      "maybe_confirm_ezsp_restore": {
-        "title": "[%key:component::zha::config::step::maybe_confirm_ezsp_restore::title%]",
-        "description": "[%key:component::zha::config::step::maybe_confirm_ezsp_restore::description%]",
-        "data": {
-          "overwrite_coordinator_ieee": "[%key:component::zha::config::step::maybe_confirm_ezsp_restore::data::overwrite_coordinator_ieee%]"
-        }
+      "verify_radio": {
+        "description": "The adapter you are using ({name}) is not recommended and support for it may be removed in the future. Please see the Zigbee Home Automation integration's documentation for [a list of recommended adapters]({docs_recommended_adapters_url}).",
+        "title": "Adapter is not recommended"
       }
-    },
-    "error": {
-      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
-      "invalid_backup_json": "[%key:component::zha::config::error::invalid_backup_json%]"
-    },
-    "abort": {
-      "not_zha_device": "[%key:component::zha::config::abort::not_zha_device%]",
-      "usb_probe_failed": "[%key:component::zha::config::abort::usb_probe_failed%]",
-      "cannot_resolve_path": "[%key:component::zha::config::abort::cannot_resolve_path%]",
-      "wrong_firmware_installed": "[%key:component::zha::config::abort::wrong_firmware_installed%]",
-      "cannot_restore_backup": "[%key:component::zha::config::abort::cannot_restore_backup%]",
-      "cannot_restore_backup_no_ieee_confirm": "[%key:component::zha::config::abort::cannot_restore_backup_no_ieee_confirm%]",
-      "reconfigure_successful": "[%key:component::zha::config::abort::reconfigure_successful%]"
     }
   },
   "config_panel": {
+    "zha_alarm_options": {
+      "alarm_arm_requires_code": "Code required for arming actions",
+      "alarm_failed_tries": "The number of consecutive failed code entries to trigger an alarm",
+      "alarm_master_code": "Master code for the alarm control panel(s)",
+      "title": "Alarm control panel options"
+    },
     "zha_options": {
-      "title": "Global options",
-      "enhanced_light_transition": "Enable enhanced light color/temperature transition from an off-state",
-      "light_transitioning_flag": "Enable enhanced brightness slider during light transition",
-      "group_members_assume_state": "Group members assume state of group",
-      "enable_identify_on_join": "Enable identify effect when devices join the network",
-      "default_light_transition": "Default light transition time (seconds)",
+      "consider_unavailable_battery": "Consider battery-powered devices unavailable after (seconds)",
       "consider_unavailable_mains": "Consider mains-powered devices unavailable after (seconds)",
+      "default_light_transition": "Default light transition time (seconds)",
+      "enable_identify_on_join": "Enable identify effect when devices join the network",
       "enable_mains_startup_polling": "Refresh state for mains-powered devices on startup",
-      "consider_unavailable_battery": "Consider battery-powered devices unavailable after (seconds)"
-    },
-    "zha_alarm_options": {
-      "title": "Alarm control panel options",
-      "alarm_master_code": "Master code for the alarm control panel(s)",
-      "alarm_failed_tries": "The number of consecutive failed code entries to trigger an alarm",
-      "alarm_arm_requires_code": "Code required for arming actions"
+      "enhanced_light_transition": "Enable enhanced light color/temperature transition from an off-state",
+      "group_members_assume_state": "Group members assume state of group",
+      "light_transitioning_flag": "Enable enhanced brightness slider during light transition",
+      "title": "Global options"
     }
   },
   "device_automation": {
     "action_type": {
-      "squawk": "Squawk",
-      "warn": "Warn",
       "issue_all_led_effect": "Issue effect for all LEDs",
-      "issue_individual_led_effect": "Issue effect for individual LED"
-    },
-    "trigger_type": {
-      "remote_button_short_press": "\"{subtype}\" pressed",
-      "remote_button_short_release": "\"{subtype}\" released",
-      "remote_button_long_press": "\"{subtype}\" continuously pressed",
-      "remote_button_long_release": "\"{subtype}\" released after long press",
-      "remote_button_double_press": "\"{subtype}\" double clicked",
-      "remote_button_triple_press": "\"{subtype}\" triple clicked",
-      "remote_button_quadruple_press": "\"{subtype}\" quadruple clicked",
-      "remote_button_quintuple_press": "\"{subtype}\" quintuple clicked",
-      "remote_button_alt_short_press": "\"{subtype}\" pressed (Alternate mode)",
-      "remote_button_alt_short_release": "\"{subtype}\" released (Alternate mode)",
-      "remote_button_alt_long_press": "\"{subtype}\" continuously pressed (Alternate mode)",
-      "remote_button_alt_long_release": "\"{subtype}\" released after long press (Alternate mode)",
-      "remote_button_alt_double_press": "\"{subtype}\" double clicked (Alternate mode)",
-      "remote_button_alt_triple_press": "\"{subtype}\" triple clicked (Alternate mode)",
-      "remote_button_alt_quadruple_press": "\"{subtype}\" quadruple clicked (Alternate mode)",
-      "remote_button_alt_quintuple_press": "\"{subtype}\" quintuple clicked (Alternate mode)",
-      "device_rotated": "Device rotated \"{subtype}\"",
-      "device_shaken": "Device shaken",
-      "device_slid": "Device slid \"{subtype}\"",
-      "device_tilted": "Device tilted",
-      "device_knocked": "Device knocked \"{subtype}\"",
-      "device_dropped": "Device dropped",
-      "device_flipped": "Device flipped \"{subtype}\"",
-      "device_offline": "Device offline"
+      "issue_individual_led_effect": "Issue effect for individual LED",
+      "squawk": "Squawk",
+      "warn": "Warn"
     },
-    "trigger_subtype": {
-      "turn_on": "[%key:common::action::turn_on%]",
-      "turn_off": "[%key:common::action::turn_off%]",
-      "dim_up": "Dim up",
-      "dim_down": "Dim down",
-      "left": "Left",
-      "right": "Right",
-      "open": "[%key:common::action::open%]",
-      "close": "[%key:common::action::close%]",
+    "extra_fields": {
+      "color": "Color hue",
+      "duration": "Duration in seconds",
+      "effect_type": "Effect type",
+      "led_number": "LED number",
+      "level": "Brightness (%)"
+    },
+    "trigger_subtype": {
       "both_buttons": "Both buttons",
       "button": "Button",
       "button_1": "First button",
@@ -309,303 +166,51 @@
       "button_4": "Fourth button",
       "button_5": "Fifth button",
       "button_6": "Sixth button",
-      "face_any": "With any/specified face(s) activated",
+      "close": "[%key:common::action::close%]",
+      "dim_down": "Dim down",
+      "dim_up": "Dim up",
       "face_1": "With face 1 activated",
       "face_2": "With face 2 activated",
       "face_3": "With face 3 activated",
       "face_4": "With face 4 activated",
       "face_5": "With face 5 activated",
-      "face_6": "With face 6 activated"
-    },
-    "extra_fields": {
-      "color": "Color hue",
-      "duration": "Duration in seconds",
-      "effect_type": "Effect type",
-      "led_number": "LED number",
-      "level": "Brightness (%)"
-    }
-  },
-  "services": {
-    "permit": {
-      "name": "Permit",
-      "description": "Allows nodes to join the Zigbee network.",
-      "fields": {
-        "duration": {
-          "name": "Duration",
-          "description": "Time to permit joins."
-        },
-        "ieee": {
-          "name": "IEEE",
-          "description": "IEEE address of the node permitting new joins."
-        },
-        "source_ieee": {
-          "name": "Source IEEE",
-          "description": "IEEE address of the joining device (must be combined with the 'Install code' field)."
-        },
-        "install_code": {
-          "name": "Install code",
-          "description": "Install code of the joining device (must be combined with the 'Source IEEE' field)."
-        },
-        "qr_code": {
-          "name": "QR code",
-          "description": "Provides both the IEEE address and the install code of the joining device (different between vendors)."
-        }
-      }
-    },
-    "remove": {
-      "name": "Remove",
-      "description": "Removes a node from the Zigbee network.",
-      "fields": {
-        "ieee": {
-          "name": "[%key:component::zha::services::permit::fields::ieee::name%]",
-          "description": "IEEE address of the node to remove."
-        }
-      }
-    },
-    "reconfigure_device": {
-      "name": "Reconfigure device",
-      "description": "Reconfigures a ZHA device (heal device). Use this if you are having issues with the device. If the device in question is a battery-powered device, ensure it is awake and accepting commands when you use this action.",
-      "fields": {
-        "ieee": {
-          "name": "[%key:component::zha::services::permit::fields::ieee::name%]",
-          "description": "IEEE address of the device to reconfigure."
-        }
-      }
-    },
-    "set_zigbee_cluster_attribute": {
-      "name": "Set Zigbee cluster attribute",
-      "description": "Sets an attribute value for the specified cluster on the specified entity.",
-      "fields": {
-        "ieee": {
-          "name": "[%key:component::zha::services::permit::fields::ieee::name%]",
-          "description": "IEEE address for the device."
-        },
-        "endpoint_id": {
-          "name": "Endpoint ID",
-          "description": "Endpoint ID for the cluster."
-        },
-        "cluster_id": {
-          "name": "Cluster ID",
-          "description": "ZCL cluster to retrieve attributes for."
-        },
-        "cluster_type": {
-          "name": "Cluster type",
-          "description": "Type of the cluster."
-        },
-        "attribute": {
-          "name": "Attribute",
-          "description": "ID of the attribute to set."
-        },
-        "value": {
-          "name": "Value",
-          "description": "Value to write to the attribute."
-        },
-        "manufacturer": {
-          "name": "Manufacturer",
-          "description": "Manufacturer code. Use a value of \"-1\" to force no code to be set."
-        }
-      }
-    },
-    "issue_zigbee_cluster_command": {
-      "name": "Issue Zigbee cluster command",
-      "description": "Issues a command on the specified cluster on the specified entity.",
-      "fields": {
-        "ieee": {
-          "name": "[%key:component::zha::services::permit::fields::ieee::name%]",
-          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::ieee::description%]"
-        },
-        "endpoint_id": {
-          "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::endpoint_id::name%]",
-          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::endpoint_id::description%]"
-        },
-        "cluster_id": {
-          "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_id::name%]",
-          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_id::description%]"
-        },
-        "cluster_type": {
-          "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_type::name%]",
-          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_type::description%]"
-        },
-        "command": {
-          "name": "Command",
-          "description": "ID of the command to execute."
-        },
-        "command_type": {
-          "name": "Command Type",
-          "description": "Type of the command to execute."
-        },
-        "args": {
-          "name": "Args",
-          "description": "Arguments to pass to the command."
-        },
-        "params": {
-          "name": "Params",
-          "description": "Parameters to pass to the command."
-        },
-        "manufacturer": {
-          "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::manufacturer::name%]",
-          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::manufacturer::description%]"
-        }
-      }
-    },
-    "issue_zigbee_group_command": {
-      "name": "Issue Zigbee group command",
-      "description": "Issues a command on the specified cluster on the specified group.",
-      "fields": {
-        "group": {
-          "name": "Group",
-          "description": "Hexadecimal address of the group."
-        },
-        "cluster_id": {
-          "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_id::name%]",
-          "description": "ZCL cluster to send command to."
-        },
-        "cluster_type": {
-          "name": "Cluster type",
-          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_type::description%]"
-        },
-        "command": {
-          "name": "Command",
-          "description": "[%key:component::zha::services::issue_zigbee_cluster_command::fields::command::description%]"
-        },
-        "args": {
-          "name": "Args",
-          "description": "[%key:component::zha::services::issue_zigbee_cluster_command::fields::args::description%]"
-        },
-        "manufacturer": {
-          "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::manufacturer::name%]",
-          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::manufacturer::description%]"
-        }
-      }
-    },
-    "warning_device_squawk": {
-      "name": "Warning device squawk",
-      "description": "This action uses the WD capabilities to emit a quick audible/visible pulse called a \"squawk\". The squawk command has no effect if the WD is currently active (warning in progress).",
-      "fields": {
-        "ieee": {
-          "name": "[%key:component::zha::services::permit::fields::ieee::name%]",
-          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::ieee::description%]"
-        },
-        "mode": {
-          "name": "[%key:common::config_flow::data::mode%]",
-          "description": "The Squawk Mode field is used as a 4-bit enumeration, and can have one of the values shown in Table 8-24 of the ZCL spec - Squawk Mode Field. The exact operation of each mode (how the WD “squawks”) is implementation specific."
-        },
-        "strobe": {
-          "name": "Strobe",
-          "description": "The strobe field is used as a Boolean, and determines if the visual indication is also required in addition to the audible squawk, as shown in Table 8-25 of the ZCL spec - Strobe Bit."
-        },
-        "level": {
-          "name": "Level",
-          "description": "The squawk level field is used as a 2-bit enumeration, and determines the intensity of audible squawk sound as shown in Table 8-26 of the ZCL spec - Squawk Level Field Values."
-        }
-      }
-    },
-    "warning_device_warn": {
-      "name": "Warning device starts alert",
-      "description": "This action starts the operation of the warning device. The warning device alerts the surrounding area by audible (siren) and visual (strobe) signals.",
-      "fields": {
-        "ieee": {
-          "name": "[%key:component::zha::services::permit::fields::ieee::name%]",
-          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::ieee::description%]"
-        },
-        "mode": {
-          "name": "[%key:common::config_flow::data::mode%]",
-          "description": "The Warning Mode field is used as a 4-bit enumeration, can have one of the values 0-6 defined below in table 8-20 of the ZCL spec. The exact behavior of the warning device in each mode is according to the relevant security standards."
-        },
-        "strobe": {
-          "name": "[%key:component::zha::services::warning_device_squawk::fields::strobe::name%]",
-          "description": "The Strobe field is used as a 2-bit enumeration, and determines if the visual indication is required in addition to the audible siren, as indicated in Table 8-21 of the ZCL spec. \"0\" means no strobe, \"1\" means strobe. If the strobe field is “1” and the Warning Mode is “0” (“Stop”), then only the strobe is activated."
-        },
-        "level": {
-          "name": "Level",
-          "description": "The Siren Level field is used as a 2-bit enumeration, and indicates the intensity of audible squawk sound as shown in Table 8-22 of the ZCL spec."
-        },
-        "duration": {
-          "name": "Duration",
-          "description": "Requested duration of warning, in seconds (16 bit). If both Strobe and Warning Mode are \"0\" this field is ignored."
-        },
-        "duty_cycle": {
-          "name": "Duty cycle",
-          "description": "Indicates the length of the flash cycle. This allows you to vary the flash duration for different alarm types (e.g., fire, police, burglar). The valid range is 0-100 in increments of 10. All other values must be rounded to the nearest valid value. Strobe calculates a duty cycle over a duration of one second. The ON state must precede the OFF state. For example, if the Strobe Duty Cycle field specifies “40,”, then the strobe flashes ON for 4/10ths of a second and then turns OFF for 6/10ths of a second."
-        },
-        "intensity": {
-          "name": "Intensity",
-          "description": "Indicates the intensity of the strobe as shown in Table 8-23 of the ZCL spec. This attribute is designed to vary the output of the strobe (i.e., brightness) and not its frequency, which is detailed in section 8.4.2.3.1.6 of the ZCL spec."
-        }
-      }
-    },
-    "clear_lock_user_code": {
-      "name": "Clear lock user",
-      "description": "Clears a user code from a lock.",
-      "fields": {
-        "code_slot": {
-          "name": "Code slot",
-          "description": "Code slot to clear code from."
-        }
-      }
-    },
-    "enable_lock_user_code": {
-      "name": "Enable lock user",
-      "description": "Enables a user code on a lock.",
-      "fields": {
-        "code_slot": {
-          "name": "[%key:component::zha::services::clear_lock_user_code::fields::code_slot::name%]",
-          "description": "Code slot to enable."
-        }
-      }
-    },
-    "disable_lock_user_code": {
-      "name": "Disable lock user",
-      "description": "Disables a user code on a lock.",
-      "fields": {
-        "code_slot": {
-          "name": "[%key:component::zha::services::clear_lock_user_code::fields::code_slot::name%]",
-          "description": "Code slot to disable."
-        }
-      }
-    },
-    "set_lock_user_code": {
-      "name": "Set lock user code",
-      "description": "Sets a user code on a lock.",
-      "fields": {
-        "code_slot": {
-          "name": "[%key:component::zha::services::clear_lock_user_code::fields::code_slot::name%]",
-          "description": "Code slot to set the code in."
-        },
-        "user_code": {
-          "name": "Code",
-          "description": "Code to set."
-        }
-      }
-    }
-  },
-  "issues": {
-    "wrong_silabs_firmware_installed_nabucasa": {
-      "title": "Zigbee adapter with multiprotocol firmware detected",
-      "description": "Your Zigbee adapter was previously used with multiprotocol (Zigbee and Thread) and still has multiprotocol firmware installed: ({firmware_type}).\n\nTo run your adapter exclusively with ZHA, you need to install the Zigbee firmware:\n - Go to Settings > System > Hardware, select the device and select Configure.\n - Select the 'Migrate Zigbee to a new adapter' option and follow the instructions."
-    },
-    "wrong_silabs_firmware_installed_other": {
-      "title": "[%key:component::zha::issues::wrong_silabs_firmware_installed_nabucasa::title%]",
-      "description": "Your Zigbee adapter was previously used with multiprotocol (Zigbee and Thread) and still has multiprotocol firmware installed: ({firmware_type}).\n\nTo run your adapter exclusively with ZHA, you need to install Zigbee firmware. Follow your Zigbee adapter manufacturer's instructions for how to do this."
+      "face_6": "With face 6 activated",
+      "face_any": "With any/specified face(s) activated",
+      "left": "Left",
+      "open": "[%key:common::action::open%]",
+      "right": "Right",
+      "rotary_knob": "Rotary knob",
+      "turn_off": "[%key:common::action::turn_off%]",
+      "turn_on": "[%key:common::action::turn_on%]"
     },
-    "inconsistent_network_settings": {
-      "title": "Zigbee network settings have changed",
-      "fix_flow": {
-        "step": {
-          "init": {
-            "title": "[%key:component::zha::issues::inconsistent_network_settings::title%]",
-            "description": "Your Zigbee adapter's network settings are inconsistent with the most recent network backup. This usually happens if another Zigbee integration (e.g. Zigbee2MQTT or deCONZ) has overwritten them.\n\n{diff}\n\nIf you did not intentionally change your network settings, restore from the most recent backup: your devices will not work otherwise.",
-            "menu_options": {
-              "use_new_settings": "Keep the new settings",
-              "restore_old_settings": "Restore backup (recommended)"
-            },
-            "menu_option_descriptions": {
-              "use_new_settings": "This will keep the new settings written to the stick. Only choose this option if you have intentionally changed settings.",
-              "restore_old_settings": "This will restore your network settings back to the last working state."
-            }
-          }
-        }
-      }
+    "trigger_type": {
+      "device_dropped": "Device dropped",
+      "device_flipped": "Device flipped \"{subtype}\"",
+      "device_knocked": "Device knocked \"{subtype}\"",
+      "device_offline": "Device offline",
+      "device_rotated": "Device rotated \"{subtype}\"",
+      "device_shaken": "Device shaken",
+      "device_slid": "Device slid \"{subtype}\"",
+      "device_tilted": "Device tilted",
+      "remote_button_alt_double_press": "\"{subtype}\" double clicked (Alternate mode)",
+      "remote_button_alt_long_press": "\"{subtype}\" continuously pressed (Alternate mode)",
+      "remote_button_alt_long_release": "\"{subtype}\" released after long press (Alternate mode)",
+      "remote_button_alt_quadruple_press": "\"{subtype}\" quadruple clicked (Alternate mode)",
+      "remote_button_alt_quintuple_press": "\"{subtype}\" quintuple clicked (Alternate mode)",
+      "remote_button_alt_short_press": "\"{subtype}\" pressed (Alternate mode)",
+      "remote_button_alt_short_release": "\"{subtype}\" released (Alternate mode)",
+      "remote_button_alt_triple_press": "\"{subtype}\" triple clicked (Alternate mode)",
+      "remote_button_double_press": "\"{subtype}\" double clicked",
+      "remote_button_long_press": "\"{subtype}\" continuously pressed",
+      "remote_button_long_release": "\"{subtype}\" released after long press",
+      "remote_button_quadruple_press": "\"{subtype}\" quadruple clicked",
+      "remote_button_quintuple_press": "\"{subtype}\" quintuple clicked",
+      "remote_button_short_press": "\"{subtype}\" pressed",
+      "remote_button_short_release": "\"{subtype}\" released",
+      "remote_button_triple_press": "\"{subtype}\" triple clicked",
+      "rotary_knob_continued_rotating": "Rotary knob continued rotating \"{subtype}\"",
+      "rotary_knob_started_rotating": "Rotary knob started rotating \"{subtype}\"",
+      "rotary_knob_stopped_rotating": "\"{subtype}\" stopped rotating"
     }
   },
   "entity": {
@@ -621,65 +226,74 @@
       "binary_input": {
         "name": "Binary input"
       },
-      "frost_lock": {
-        "name": "Frost lock"
-      },
-      "replace_filter": {
-        "name": "Replace filter"
+      "calibrated": {
+        "name": "Calibrated"
       },
       "consumer_connected": {
         "name": "Consumer connected"
       },
-      "valve_alarm": {
-        "name": "Valve alarm"
-      },
-      "calibrated": {
-        "name": "Calibrated"
+      "error_or_battery_low": {
+        "name": "Error or battery low"
       },
       "external_sensor": {
         "name": "External sensor"
       },
-      "linkage_alarm_state": {
-        "name": "Linkage alarm state"
+      "fault_alarm": {
+        "name": "Fault alarm"
       },
-      "ias_zone": {
-        "name": "IAS zone"
+      "flow_switch": {
+        "name": "Flow switch"
       },
-      "hand_open": {
-        "name": "Opened by hand"
+      "frient_in_1": {
+        "name": "IN1"
       },
-      "mounting_mode_active": {
-        "name": "Mounting mode active"
+      "frient_in_2": {
+        "name": "IN2"
       },
-      "heat_required": {
+      "frient_in_3": {
+        "name": "IN3"
+      },
+      "frient_in_4": {
+        "name": "IN4"
+      },
+      "frost_lock": {
+        "name": "Frost lock"
+      },
+      "hand_open": {
+        "name": "Opened by hand"
+      },
+      "heat_required": {
         "name": "Heat required"
       },
-      "preheat_status": {
-        "name": "Pre-heat status"
+      "ias_zone": {
+        "name": "IAS zone"
       },
-      "open_window_detection_status": {
-        "name": "Open window detection status"
+      "led_indicator": {
+        "name": "LED indicator"
       },
-      "window_detection": {
-        "name": "Open window detection"
+      "linkage_alarm_state": {
+        "name": "Linkage alarm state"
       },
-      "silence_alarm": {
-        "name": "Silence alarm"
+      "mounting_mode_active": {
+        "name": "Mounting mode active"
+      },
+      "open_window_detection_status": {
+        "name": "Open window detection status"
       },
       "preheat_active": {
         "name": "Preheat active"
       },
-      "fault_alarm": {
-        "name": "Fault alarm"
+      "preheat_status": {
+        "name": "Pre-heat status"
       },
-      "led_indicator": {
-        "name": "LED indicator"
+      "replace_filter": {
+        "name": "Replace filter"
       },
-      "error_or_battery_low": {
-        "name": "Error or battery low"
+      "silence_alarm": {
+        "name": "Silence alarm"
       },
-      "flow_switch": {
-        "name": "Flow switch"
+      "valve_alarm": {
+        "name": "Valve alarm"
       },
       "water_leak": {
         "name": "Water leak"
@@ -687,46 +301,46 @@
       "water_supply": {
         "name": "Water supply"
       },
-      "frient_in_1": {
-        "name": "IN1"
-      },
-      "frient_in_2": {
-        "name": "IN2"
-      },
-      "frient_in_3": {
-        "name": "IN3"
-      },
-      "frient_in_4": {
-        "name": "IN4"
+      "window_detection": {
+        "name": "Open window detection"
       }
     },
     "button": {
-      "reset_frost_lock": {
-        "name": "Frost lock reset"
+      "calibrate_valve": {
+        "name": "Calibrate valve"
       },
-      "reset_no_presence_status": {
-        "name": "Presence status reset"
+      "calibrate_z_axis": {
+        "name": "Calibrate Z axis"
       },
       "feed": {
         "name": "Feed"
       },
-      "self_test": {
-        "name": "Self-test"
+      "frost_lock_reset": {
+        "name": "Frost lock reset"
+      },
+      "reset_alarm": {
+        "name": "Reset alarm"
+      },
+      "reset_frost_lock": {
+        "name": "Frost lock reset"
+      },
+      "reset_no_presence_status": {
+        "name": "Presence status reset"
       },
       "reset_summation_delivered": {
         "name": "Reset summation delivered"
       },
-      "restart_device": {
-        "name": "Restart device"
+      "reset_summation_delivered_left": {
+        "name": "Reset left summation delivered"
       },
-      "frost_lock_reset": {
-        "name": "Frost lock reset"
+      "reset_summation_delivered_right": {
+        "name": "Reset right summation delivered"
       },
-      "reset_alarm": {
-        "name": "Reset alarm"
+      "restart_device": {
+        "name": "Restart device"
       },
-      "calibrate_valve": {
-        "name": "Calibrate valve"
+      "self_test": {
+        "name": "Self-test"
       }
     },
     "climate": {
@@ -738,11 +352,11 @@
       "cover": {
         "name": "[%key:component::cover::title%]"
       },
-      "shade": {
-        "name": "[%key:component::cover::entity_component::shade::name%]"
-      },
       "keen_vent": {
         "name": "Keen vent"
+      },
+      "shade": {
+        "name": "[%key:component::cover::entity_component::shade::name%]"
       }
     },
     "fan": {
@@ -782,74 +396,92 @@
       }
     },
     "number": {
-      "number": {
-        "name": "[%key:component::number::title%]"
+      "alarm_duration": {
+        "name": "Alarm duration"
       },
-      "detection_interval": {
-        "name": "Detection interval"
+      "alarm_humidity_max": {
+        "name": "Alarm humidity max"
       },
-      "on_level": {
-        "name": "On level"
+      "alarm_humidity_min": {
+        "name": "Alarm humidity min"
       },
-      "on_off_transition_time": {
-        "name": "On/Off transition time"
+      "alarm_temperature_max": {
+        "name": "Alarm temperature max"
       },
-      "on_transition_time": {
-        "name": "On transition time"
+      "alarm_temperature_min": {
+        "name": "Alarm temperature min"
       },
-      "off_transition_time": {
-        "name": "Off transition time"
+      "ambient_sensor_correction": {
+        "name": "Ambient sensor correction"
       },
-      "default_move_rate": {
-        "name": "Default move rate"
+      "antifrost_temperature": {
+        "name": "Antifrost temperature"
       },
-      "start_up_current_level": {
-        "name": "Start-up current level"
+      "approach_distance": {
+        "name": "Approach distance"
       },
-      "start_up_color_temperature": {
-        "name": "Start-up color temperature"
+      "auto_off_timer": {
+        "name": "Automatic switch shutoff timer"
       },
-      "timer_duration": {
-        "name": "Timer duration"
+      "away_preset_temperature": {
+        "name": "Away preset temperature"
       },
-      "filter_life_time": {
-        "name": "Filter life time"
+      "block_time": {
+        "name": "Block time"
       },
-      "transmit_power": {
-        "name": "Transmit power"
+      "boost_amount": {
+        "name": "Boost amount"
       },
-      "dimming_speed_up_remote": {
-        "name": "Remote dimming up speed"
+      "boost_time": {
+        "name": "Boost time"
+      },
+      "breath_detection_max": {
+        "name": "Breath detection max"
+      },
+      "breath_detection_min": {
+        "name": "Breath detection min"
+      },
+      "breath_sensitivity": {
+        "name": "Breath sensitivity"
       },
       "button_delay": {
         "name": "Button delay"
       },
-      "dimming_speed_up_local": {
-        "name": "Local dimming up speed"
+      "calibration_rotation_run_time_down": {
+        "name": "Calibration rotation run time down"
       },
-      "ramp_rate_off_to_on_local": {
-        "name": "Local ramp rate off to on"
+      "calibration_rotation_run_time_up": {
+        "name": "Calibration rotation run time up"
       },
-      "ramp_rate_off_to_on_remote": {
-        "name": "Remote ramp rate off to on"
+      "calibration_vertical_run_time_down": {
+        "name": "Calibration vertical run time down"
       },
-      "dimming_speed_down_remote": {
-        "name": "Remote dimming down speed"
+      "calibration_vertical_run_time_up": {
+        "name": "Calibration vertical run time up"
       },
-      "dimming_speed_down_local": {
-        "name": "Local dimming down speed"
+      "closing_duration": {
+        "name": "Closing duration"
       },
-      "ramp_rate_on_to_off_local": {
-        "name": "Local ramp rate on to off"
+      "comfort_humidity_max": {
+        "name": "Comfort humidity max"
       },
-      "ramp_rate_on_to_off_remote": {
-        "name": "Remote ramp rate on to off"
+      "comfort_humidity_min": {
+        "name": "Comfort humidity min"
       },
-      "minimum_level": {
-        "name": "Minimum load dimming level"
+      "comfort_temperature": {
+        "name": "Comfort temperature"
       },
-      "maximum_level": {
-        "name": "Maximum load dimming level"
+      "comfort_temperature_max": {
+        "name": "Comfort temperature max"
+      },
+      "comfort_temperature_min": {
+        "name": "Comfort temperature min"
+      },
+      "compensation_speed": {
+        "name": "Compensation speed"
+      },
+      "deadzone_temperature": {
+        "name": "Deadzone temperature"
       },
       "default_level_local": {
         "name": "Local default dimming level"
@@ -857,401 +489,380 @@
       "default_level_remote": {
         "name": "Remote default dimming level"
       },
-      "state_after_power_restored": {
-        "name": "Start-up default dimming level"
+      "default_move_rate": {
+        "name": "Default move rate"
       },
-      "auto_off_timer": {
-        "name": "Automatic switch shutoff timer"
+      "detection_delay": {
+        "name": "Detection delay"
       },
-      "load_level_indicator_timeout": {
-        "name": "Load level indicator timeout"
+      "detection_distance_max": {
+        "name": "Maximum range"
       },
-      "led_color_when_on": {
-        "name": "Default all LED on color"
+      "detection_distance_min": {
+        "name": "Minimum range"
       },
-      "led_color_when_off": {
-        "name": "Default all LED off color"
+      "detection_interval": {
+        "name": "Detection interval"
       },
-      "led_intensity_when_on": {
-        "name": "Default all LED on intensity"
+      "dimming_speed_down_local": {
+        "name": "Local dimming down speed"
       },
-      "led_intensity_when_off": {
-        "name": "Default all LED off intensity"
+      "dimming_speed_down_remote": {
+        "name": "Remote dimming down speed"
       },
-      "double_tap_up_level": {
-        "name": "Double tap up level"
+      "dimming_speed_up_local": {
+        "name": "Local dimming up speed"
       },
-      "double_tap_down_level": {
-        "name": "Double tap down level"
+      "dimming_speed_up_remote": {
+        "name": "Remote dimming up speed"
       },
-      "serving_size": {
-        "name": "Serving to dispense"
+      "display_activity_timeout": {
+        "name": "Display activity timeout"
       },
-      "portion_weight": {
-        "name": "Portion weight"
+      "display_brightness": {
+        "name": "Display brightness"
       },
-      "away_preset_temperature": {
-        "name": "Away preset temperature"
+      "display_inactive_brightness": {
+        "name": "Display inactive brightness"
       },
-      "quick_start_time": {
-        "name": "Quick start time"
+      "display_on_time": {
+        "name": "Display on-time"
       },
-      "local_temperature_calibration": {
-        "name": "Local temperature offset"
+      "double_tap_down_level": {
+        "name": "Double tap down level"
       },
-      "presence_detection_timeout": {
-        "name": "Presence detection timeout"
+      "double_tap_up_level": {
+        "name": "Double tap up level"
       },
-      "max_heat_setpoint_limit": {
-        "name": "Max heat setpoint limit"
+      "down_movement": {
+        "name": "Down movement"
       },
-      "min_heat_setpoint_limit": {
-        "name": "Min heat setpoint limit"
+      "eco_temperature": {
+        "name": "Eco temperature"
+      },
+      "entry_distance_indentation": {
+        "name": "Entry distance indentation"
+      },
+      "entry_sensitivity": {
+        "name": "Entry sensitivity"
       },
       "exercise_trigger_time": {
         "name": "Exercise start time"
       },
+      "external_sensor_correction": {
+        "name": "External sensor correction"
+      },
       "external_temperature_sensor": {
         "name": "External temperature sensor"
       },
-      "load_room_mean": {
-        "name": "Load room mean"
-      },
-      "regulation_setpoint_offset": {
-        "name": "Regulation setpoint offset"
-      },
-      "irrigation_cycles": {
-        "name": "Irrigation cycles"
-      },
-      "irrigation_target": {
-        "name": "Irrigation target"
-      },
-      "irrigation_interval": {
-        "name": "Irrigation interval"
+      "external_temperature_sensor_value": {
+        "name": "External temperature sensor value"
       },
-      "valve_countdown_1": {
-        "name": "Irrigation time 1"
+      "fading_time": {
+        "name": "Fading time"
       },
-      "valve_countdown_2": {
-        "name": "Irrigation time 2"
+      "fallback_timeout": {
+        "name": "Fallback timeout"
       },
-      "on_led_intensity": {
-        "name": "On LED intensity"
+      "filter_life_time": {
+        "name": "Filter life time"
       },
-      "off_led_intensity": {
-        "name": "Off LED intensity"
+      "fixed_load_demand": {
+        "name": "Fixed load demand"
       },
       "frost_protection_temperature": {
         "name": "Frost protection temperature"
       },
-      "valve_opening_degree": {
-        "name": "Valve opening degree"
-      },
-      "valve_closing_degree": {
-        "name": "Valve closing degree"
-      },
-      "siren_time": {
-        "name": "Siren time"
-      },
-      "timer_time_left": {
-        "name": "Timer time left"
+      "hold_delay_time": {
+        "name": "Hold delay time"
       },
-      "approach_distance": {
-        "name": "Approach distance"
+      "holiday_temperature": {
+        "name": "Holiday temperature"
       },
-      "fixed_load_demand": {
-        "name": "Fixed load demand"
+      "humidity_offset": {
+        "name": "Humidity offset"
       },
-      "display_brightness": {
-        "name": "Display brightness"
+      "humidity_report_interval": {
+        "name": "Humidity report interval"
       },
-      "display_inactive_brightness": {
-        "name": "Display inactive brightness"
+      "humidity_sensitivity": {
+        "name": "Humidity sensitivity"
       },
-      "display_activity_timeout": {
-        "name": "Display activity timeout"
+      "hush_duration": {
+        "name": "Hush duration"
       },
-      "open_window_detection_threshold": {
-        "name": "Open window detection threshold"
+      "illuminance_interval": {
+        "name": "Illuminance interval"
       },
-      "open_window_event_duration": {
-        "name": "Open window event duration"
+      "illuminance_threshold": {
+        "name": "Illuminance threshold"
       },
-      "open_window_detection_guard_period": {
-        "name": "Open window detection guard period"
+      "impulse_mode_duration": {
+        "name": "Impulse mode duration"
       },
-      "fallback_timeout": {
-        "name": "Fallback timeout"
+      "installation_height": {
+        "name": "Height from sensor to tank bottom"
       },
-      "boost_amount": {
-        "name": "Boost amount"
+      "interval_time": {
+        "name": "Interval time"
       },
-      "ambient_sensor_correction": {
-        "name": "Ambient sensor correction"
+      "irrigation_cycles": {
+        "name": "Irrigation cycles"
       },
-      "external_sensor_correction": {
-        "name": "External sensor correction"
+      "irrigation_interval": {
+        "name": "Irrigation interval"
       },
-      "move_sensitivity": {
-        "name": "Motion sensitivity"
+      "irrigation_target": {
+        "name": "Irrigation target"
       },
-      "detection_distance_min": {
-        "name": "Minimum range"
+      "large_motion_detection_distance": {
+        "name": "Motion detection distance"
       },
-      "detection_distance_max": {
-        "name": "Maximum range"
+      "large_motion_detection_sensitivity": {
+        "name": "Motion detection sensitivity"
       },
-      "presence_sensitivity": {
-        "name": "Presence sensitivity"
+      "led_color_when_off": {
+        "name": "Default all LED off color"
       },
-      "presence_timeout": {
-        "name": "Fade time"
+      "led_color_when_on": {
+        "name": "Default all LED on color"
       },
-      "regulator_set_point": {
-        "name": "Regulator setpoint"
+      "led_intensity_when_off": {
+        "name": "Default all LED off intensity"
       },
-      "detection_delay": {
-        "name": "Detection delay"
+      "led_intensity_when_on": {
+        "name": "Default all LED on intensity"
       },
-      "fading_time": {
-        "name": "Fading time"
+      "lift_drive_down_time": {
+        "name": "Lift drive down time"
       },
-      "temperature_offset": {
-        "name": "Temperature offset"
+      "lift_drive_up_time": {
+        "name": "Lift drive up time"
       },
-      "humidity_offset": {
-        "name": "Humidity offset"
+      "limit_position": {
+        "name": "Limit position"
       },
-      "comfort_temperature_min": {
-        "name": "Comfort temperature min"
+      "liquid_depth_max": {
+        "name": "Height from sensor to liquid level"
       },
-      "comfort_temperature_max": {
-        "name": "Comfort temperature max"
+      "load_level_indicator_timeout": {
+        "name": "Load level indicator timeout"
       },
-      "comfort_humidity_min": {
-        "name": "Comfort humidity min"
+      "load_room_mean": {
+        "name": "Load room mean"
       },
-      "comfort_humidity_max": {
-        "name": "Comfort humidity max"
+      "local_temperature_calibration": {
+        "name": "Local temperature offset"
       },
-      "measurement_interval": {
-        "name": "Measurement interval"
+      "long_press_duration": {
+        "name": "Long press duration"
       },
-      "on_time": {
-        "name": "On time"
+      "max_brightness": {
+        "name": "Maximum brightness"
       },
-      "alarm_duration": {
-        "name": "Alarm duration"
+      "max_heat_setpoint_limit": {
+        "name": "Max heat setpoint limit"
       },
       "max_set": {
         "name": "Liquid max percentage"
       },
-      "mini_set": {
-        "name": "Liquid minimal percentage"
-      },
-      "installation_height": {
-        "name": "Height from sensor to tank bottom"
-      },
-      "liquid_depth_max": {
-        "name": "Height from sensor to liquid level"
-      },
-      "interval_time": {
-        "name": "Interval time"
-      },
-      "target_distance": {
-        "name": "Target distance"
-      },
-      "hold_delay_time": {
-        "name": "Hold delay time"
+      "max_temperature": {
+        "name": "Max temperature"
       },
-      "breath_detection_max": {
-        "name": "Breath detection max"
+      "maximum_level": {
+        "name": "Maximum load dimming level"
       },
-      "breath_detection_min": {
-        "name": "Breath detection min"
+      "measurement_interval": {
+        "name": "Measurement interval"
       },
-      "small_move_detection_max": {
-        "name": "Small move detection max"
+      "medium_motion_detection_distance": {
+        "name": "Medium motion detection distance"
       },
-      "small_move_detection_min": {
-        "name": "Small move detection min"
+      "medium_motion_detection_sensitivity": {
+        "name": "Medium motion detection sensitivity"
       },
-      "small_move_sensitivity": {
-        "name": "Small move sensitivity"
+      "min_brightness": {
+        "name": "Minimum brightness"
       },
-      "breath_sensitivity": {
-        "name": "Breath sensitivity"
+      "min_heat_setpoint_limit": {
+        "name": "Min heat setpoint limit"
       },
-      "entry_sensitivity": {
-        "name": "Entry sensitivity"
+      "min_temperature": {
+        "name": "Min temperature"
       },
-      "entry_distance_indentation": {
-        "name": "Entry distance indentation"
+      "mini_set": {
+        "name": "Liquid minimal percentage"
       },
-      "illuminance_threshold": {
-        "name": "Illuminance threshold"
+      "minimum_level": {
+        "name": "Minimum load dimming level"
       },
-      "block_time": {
-        "name": "Block time"
+      "motion_detection_sensitivity": {
+        "name": "Motion detection sensitivity"
       },
       "motion_sensitivity": {
         "name": "Motion sensitivity"
       },
-      "radar_sensitivity": {
-        "name": "Radar sensitivity"
-      },
       "motionless_detection": {
         "name": "Motionless detection"
       },
       "motionless_sensitivity": {
         "name": "Motionless detection sensitivity"
       },
-      "output_time": {
-        "name": "Output time"
+      "motor_start_delay": {
+        "name": "Motor start delay"
       },
-      "illuminance_interval": {
-        "name": "Illuminance interval"
+      "move_sensitivity": {
+        "name": "Motion sensitivity"
       },
-      "temperature_report_interval": {
-        "name": "Temperature report interval"
+      "number": {
+        "name": "[%key:component::number::title%]"
       },
-      "humidity_report_interval": {
-        "name": "Humidity report interval"
-      },
-      "alarm_temperature_max": {
-        "name": "Alarm temperature max"
+      "off_led_intensity": {
+        "name": "Off LED intensity"
       },
-      "alarm_temperature_min": {
-        "name": "Alarm temperature min"
+      "off_transition_time": {
+        "name": "Off transition time"
       },
-      "temperature_sensitivity": {
-        "name": "Temperature sensitivity"
+      "on_led_intensity": {
+        "name": "On LED intensity"
       },
-      "alarm_humidity_max": {
-        "name": "Alarm humidity max"
+      "on_level": {
+        "name": "On level"
       },
-      "alarm_humidity_min": {
-        "name": "Alarm humidity min"
+      "on_off_transition_time": {
+        "name": "On/Off transition time"
       },
-      "humidity_sensitivity": {
-        "name": "Humidity sensitivity"
+      "on_time": {
+        "name": "On time"
       },
-      "deadzone_temperature": {
-        "name": "Deadzone temperature"
+      "on_transition_time": {
+        "name": "On transition time"
       },
-      "min_temperature": {
-        "name": "Min temperature"
+      "open_delay_time": {
+        "name": "Open delay time"
       },
-      "max_temperature": {
-        "name": "Max temperature"
+      "open_window_detection_guard_period": {
+        "name": "Open window detection guard period"
       },
-      "valve_countdown": {
-        "name": "Irrigation time"
+      "open_window_detection_threshold": {
+        "name": "Open window detection threshold"
       },
-      "quantitative_watering": {
-        "name": "Quantitative watering"
+      "open_window_event_duration": {
+        "name": "Open window event duration"
       },
-      "valve_duration": {
-        "name": "Irrigation duration"
+      "opening_duration": {
+        "name": "Opening duration"
       },
-      "down_movement": {
-        "name": "Down movement"
+      "output_time": {
+        "name": "Output time"
       },
-      "sustain_time": {
-        "name": "Sustain time"
+      "portion_weight": {
+        "name": "Portion weight"
       },
-      "up_movement": {
-        "name": "Up movement"
+      "presence_detection_timeout": {
+        "name": "Presence detection timeout"
       },
-      "large_motion_detection_sensitivity": {
-        "name": "Motion detection sensitivity"
+      "presence_sensitivity": {
+        "name": "Presence sensitivity"
       },
-      "large_motion_detection_distance": {
-        "name": "Motion detection distance"
+      "presence_timeout": {
+        "name": "Fade time"
       },
-      "medium_motion_detection_distance": {
-        "name": "Medium motion detection distance"
+      "pulse_configuration": {
+        "name": "Pulse configuration"
       },
-      "medium_motion_detection_sensitivity": {
-        "name": "Medium motion detection sensitivity"
+      "quantitative_watering": {
+        "name": "Quantitative watering"
       },
-      "small_motion_detection_distance": {
-        "name": "Small motion detection distance"
+      "quick_start_time": {
+        "name": "Quick start time"
       },
-      "small_motion_detection_sensitivity": {
-        "name": "Small motion detection sensitivity"
+      "radar_sensitivity": {
+        "name": "Radar sensitivity"
       },
-      "static_detection_sensitivity": {
-        "name": "Static detection sensitivity"
+      "ramp_rate_off_to_on_local": {
+        "name": "Local ramp rate off to on"
       },
-      "static_detection_distance": {
-        "name": "Static detection distance"
+      "ramp_rate_off_to_on_remote": {
+        "name": "Remote ramp rate off to on"
       },
-      "motion_detection_sensitivity": {
-        "name": "Motion detection sensitivity"
+      "ramp_rate_on_to_off_local": {
+        "name": "Local ramp rate on to off"
       },
-      "holiday_temperature": {
-        "name": "Holiday temperature"
+      "ramp_rate_on_to_off_remote": {
+        "name": "Remote ramp rate on to off"
       },
-      "boost_time": {
-        "name": "Boost time"
+      "regulation_setpoint_offset": {
+        "name": "Regulation setpoint offset"
       },
-      "antifrost_temperature": {
-        "name": "Antifrost temperature"
+      "regulator_set_point": {
+        "name": "Regulator setpoint"
       },
-      "eco_temperature": {
-        "name": "Eco temperature"
+      "reporting_interval": {
+        "name": "Reporting interval"
       },
-      "comfort_temperature": {
-        "name": "Comfort temperature"
+      "sensitivity": {
+        "name": "Sensitivity"
       },
-      "valve_state_auto_shutdown": {
-        "name": "Valve state auto-shutdown"
+      "serving_size": {
+        "name": "Serving to dispense"
       },
       "shutdown_timer": {
         "name": "Shutdown timer"
       },
-      "calibration_vertical_run_time_up": {
-        "name": "Calibration vertical run time up"
+      "siren_time": {
+        "name": "Siren time"
       },
-      "calibration_vertical_run_time_down": {
-        "name": "Calibration vertical run time down"
+      "small_motion_detection_distance": {
+        "name": "Small motion detection distance"
       },
-      "calibration_rotation_run_time_up": {
-        "name": "Calibration rotation run time up"
+      "small_motion_detection_sensitivity": {
+        "name": "Small motion detection sensitivity"
       },
-      "calibration_rotation_run_time_down": {
-        "name": "Calibration rotation run time down"
+      "small_move_detection_max": {
+        "name": "Small move detection max"
       },
-      "impulse_mode_duration": {
-        "name": "Impulse mode duration"
+      "small_move_detection_min": {
+        "name": "Small move detection min"
       },
-      "water_duration": {
-        "name": "Water duration"
+      "small_move_sensitivity": {
+        "name": "Small move sensitivity"
       },
-      "water_interval": {
-        "name": "Water interval"
+      "sound_volume": {
+        "name": "Sound volume"
       },
-      "hush_duration": {
-        "name": "Hush duration"
+      "start_up_color_temperature": {
+        "name": "Start-up color temperature"
       },
-      "temperature_control_accuracy": {
-        "name": "Temperature control accuracy"
+      "start_up_current_level": {
+        "name": "Start-up current level"
       },
-      "external_temperature_sensor_value": {
-        "name": "External temperature sensor value"
+      "state_after_power_restored": {
+        "name": "Start-up default dimming level"
       },
-      "update_frequency": {
-        "name": "Update frequency"
+      "static_detection_distance": {
+        "name": "Static detection distance"
       },
-      "sound_volume": {
-        "name": "Sound volume"
+      "static_detection_sensitivity": {
+        "name": "Static detection sensitivity"
       },
-      "lift_drive_up_time": {
-        "name": "Lift drive up time"
+      "sustain_time": {
+        "name": "Sustain time"
       },
-      "lift_drive_down_time": {
-        "name": "Lift drive down time"
+      "target_distance": {
+        "name": "Target distance"
+      },
+      "temperature_control_accuracy": {
+        "name": "Temperature control accuracy"
+      },
+      "temperature_offset": {
+        "name": "Temperature offset"
+      },
+      "temperature_report_interval": {
+        "name": "Temperature report interval"
+      },
+      "temperature_sensitivity": {
+        "name": "Temperature sensitivity"
       },
       "tilt_open_close_and_step_time": {
         "name": "Tilt open close and step time"
@@ -1259,148 +870,169 @@
       "tilt_position_percentage_after_move_to_level": {
         "name": "Tilt position percentage after move to level"
       },
-      "display_on_time": {
-        "name": "Display on-time"
+      "timer_duration": {
+        "name": "Timer duration"
       },
-      "closing_duration": {
-        "name": "Closing duration"
+      "timer_time_left": {
+        "name": "Timer time left"
       },
-      "opening_duration": {
-        "name": "Opening duration"
+      "transmit_power": {
+        "name": "Transmit power"
       },
-      "long_press_duration": {
-        "name": "Long press duration"
+      "turn_off_delay": {
+        "name": "Turn off delay"
       },
-      "motor_start_delay": {
-        "name": "Motor start delay"
+      "turn_off_delay_left": {
+        "name": "Turn off delay left"
       },
-      "max_brightness": {
-        "name": "Maximum brightness"
+      "turn_off_delay_right": {
+        "name": "Turn off delay right"
       },
-      "min_brightness": {
-        "name": "Minimum brightness"
+      "turn_on_delay": {
+        "name": "Turn on delay"
       },
-      "reporting_interval": {
-        "name": "Reporting interval"
+      "turn_on_delay_left": {
+        "name": "Turn on delay left"
       },
-      "sensitivity": {
-        "name": "Sensitivity"
-      }
-    },
-    "select": {
-      "default_siren_tone": {
-        "name": "Default siren tone"
+      "turn_on_delay_right": {
+        "name": "Turn on delay right"
       },
-      "default_siren_level": {
-        "name": "Default siren level"
+      "up_movement": {
+        "name": "Up movement"
       },
-      "default_strobe_level": {
-        "name": "Default strobe level"
+      "update_frequency": {
+        "name": "Update frequency"
       },
-      "default_strobe": {
-        "name": "Default strobe"
+      "valve_closing_degree": {
+        "name": "Valve closing degree"
       },
-      "start_up_on_off": {
-        "name": "Start-up behavior"
+      "valve_countdown": {
+        "name": "Irrigation time"
       },
-      "power_on_state": {
-        "name": "Power on state"
+      "valve_countdown_1": {
+        "name": "Irrigation time 1"
       },
-      "backlight_mode": {
-        "name": "Backlight mode"
+      "valve_countdown_2": {
+        "name": "Irrigation time 2"
       },
-      "motion_sensitivity": {
-        "name": "Motion sensitivity"
+      "valve_duration": {
+        "name": "Irrigation duration"
       },
-      "monitoring_mode": {
-        "name": "Monitoring mode"
+      "valve_opening_degree": {
+        "name": "Valve opening degree"
       },
-      "approach_distance": {
-        "name": "Approach distance"
+      "valve_state_auto_shutdown": {
+        "name": "Valve state auto-shutdown"
       },
-      "window_covering_mode": {
-        "name": "Curtain mode"
+      "water_duration": {
+        "name": "Water duration"
       },
-      "output_mode": {
-        "name": "Output mode"
+      "water_interval": {
+        "name": "Water interval"
+      }
+    },
+    "select": {
+      "adaptation_run_command": {
+        "name": "Adaptation run command"
       },
-      "switch_type": {
-        "name": "Switch type"
+      "alarm_mode": {
+        "name": "Alarm mode"
       },
-      "led_scaling_mode": {
-        "name": "LED scaling mode"
+      "alarm_ringtone": {
+        "name": "Alarm ringtone"
       },
-      "smart_fan_led_display_levels": {
-        "name": "Smart fan LED display levels"
+      "alarm_sound_level": {
+        "name": "Alarm sound level"
       },
-      "increased_non_neutral_output": {
-        "name": "Increased non-neutral output"
+      "alarm_sound_mode": {
+        "name": "Alarm sound mode"
       },
-      "leading_or_trailing_edge": {
-        "name": "Dimming mode"
+      "alarm_volume": {
+        "name": "Alarm volume"
       },
-      "feeding_mode": {
-        "name": "Mode"
+      "approach_distance": {
+        "name": "Approach distance"
       },
-      "preset": {
-        "name": "Preset"
+      "backlight_mode": {
+        "name": "Backlight mode"
       },
-      "detection_distance": {
-        "name": "Detection distance"
+      "breaker_mode": {
+        "name": "Breaker mode"
       },
-      "switch_mode": {
-        "name": "Switch mode"
+      "breaker_polarity": {
+        "name": "Breaker polarity"
+      },
+      "breaker_status": {
+        "name": "Breaker status"
+      },
+      "calibration_mode": {
+        "name": "Calibration mode"
+      },
+      "click_mode": {
+        "name": "Click mode"
+      },
+      "control_type": {
+        "name": "Control type"
+      },
+      "ctrl_sequence_of_oper": {
+        "name": "Control sequence"
       },
       "decoupled_mode": {
         "name": "Decoupled mode"
       },
+      "default_siren_level": {
+        "name": "Default siren level"
+      },
+      "default_siren_tone": {
+        "name": "Default siren tone"
+      },
+      "default_strobe": {
+        "name": "Default strobe"
+      },
+      "default_strobe_level": {
+        "name": "Default strobe level"
+      },
+      "detection_distance": {
+        "name": "Detection distance"
+      },
       "detection_sensitivity": {
         "name": "Detection sensitivity"
       },
-      "keypad_lockout": {
-        "name": "Keypad lockout"
-      },
-      "exercise_day_of_week": {
-        "name": "Exercise day of the week"
+      "device_mode": {
+        "name": "Device mode"
       },
-      "valve_orientation": {
-        "name": "Valve orientation"
+      "display_brightness": {
+        "name": "Display brightness"
       },
-      "adaptation_run_command": {
-        "name": "Adaptation run command"
+      "display_orientation": {
+        "name": "Display orientation"
       },
-      "viewing_direction": {
-        "name": "Viewing direction"
+      "display_unit": {
+        "name": "Display unit"
       },
-      "setpoint_response_time": {
-        "name": "Setpoint response time"
+      "displayed_temperature": {
+        "name": "Displayed temperature"
       },
-      "irrigation_mode": {
-        "name": "Irrigation mode"
+      "eco_mode": {
+        "name": "Eco mode"
       },
-      "weather_delay": {
-        "name": "Weather delay"
+      "exercise_day_of_week": {
+        "name": "Exercise day of the week"
       },
-      "on_led_color": {
-        "name": "On LED color"
+      "external_switch_type": {
+        "name": "External switch type"
       },
-      "off_led_color": {
-        "name": "Off LED color"
+      "external_temperature_sensor_type": {
+        "name": "External temperature sensor type"
       },
       "external_trigger_mode": {
         "name": "External trigger mode"
       },
-      "local_temperature_source": {
-        "name": "Local temperature source"
-      },
-      "control_type": {
-        "name": "Control type"
-      },
-      "thermostat_application": {
-        "name": "Thermostat application"
+      "fading_time": {
+        "name": "Fading time"
       },
-      "heating_fuel": {
-        "name": "Heating fuel"
+      "feeding_mode": {
+        "name": "Mode"
       },
       "heat_transfer_medium": {
         "name": "Heat transfer medium"
@@ -1408,296 +1040,415 @@
       "heating_emitter_type": {
         "name": "Heating emitter type"
       },
-      "external_temperature_sensor_type": {
-        "name": "External temperature sensor type"
-      },
-      "preset_mode": {
-        "name": "Preset mode"
-      },
-      "sensor_mode": {
-        "name": "Sensor mode"
+      "heating_fuel": {
+        "name": "Heating fuel"
       },
-      "thermostat_mode": {
-        "name": "Thermostat mode"
+      "hysteresis_mode": {
+        "name": "Hysteresis mode"
       },
-      "regulator_period": {
-        "name": "Regulator period"
+      "increased_non_neutral_output": {
+        "name": "Increased non-neutral output"
       },
-      "click_mode": {
-        "name": "Click mode"
+      "irrigation_mode": {
+        "name": "Irrigation mode"
       },
-      "operation_mode": {
-        "name": "Operation mode"
+      "keypad_lockout": {
+        "name": "Keypad lockout"
       },
-      "device_mode": {
-        "name": "Device mode"
+      "leading_or_trailing_edge": {
+        "name": "Dimming mode"
       },
-      "pilot_wire_mode": {
-        "name": "Pilot wire mode"
+      "led_brightness": {
+        "name": "LED brightness"
       },
-      "alarm_ringtone": {
-        "name": "Alarm ringtone"
+      "led_scaling_mode": {
+        "name": "LED scaling mode"
       },
       "liquid_state": {
         "name": "Liquid state"
       },
-      "breaker_mode": {
-        "name": "Breaker mode"
-      },
-      "breaker_status": {
-        "name": "Breaker status"
-      },
-      "status_indication": {
-        "name": "Status indication"
-      },
-      "breaker_polarity": {
-        "name": "Breaker polarity"
-      },
-      "work_mode": {
-        "name": "Work mode"
-      },
-      "presence_sensitivity": {
-        "name": "Presence sensitivity"
-      },
-      "fading_time": {
-        "name": "Fading time"
-      },
-      "display_unit": {
-        "name": "Display unit"
-      },
-      "alarm_mode": {
-        "name": "Alarm mode"
-      },
-      "alarm_volume": {
-        "name": "Alarm volume"
-      },
-      "working_day": {
-        "name": "Working day"
-      },
-      "eco_mode": {
-        "name": "Eco mode"
+      "local_temperature_source": {
+        "name": "Local temperature source"
       },
       "mode": {
         "name": "Mode"
       },
-      "reverse": {
-        "name": "Reverse"
+      "mode_switch": {
+        "name": "Mode switch"
       },
-      "motion_state": {
-        "name": "Motion state"
+      "monitoring_mode": {
+        "name": "Monitoring mode"
       },
       "motion_detection_mode": {
         "name": "Motion detection mode"
       },
-      "screen_orientation": {
-        "name": "Screen orientation"
+      "motion_sensitivity": {
+        "name": "Motion sensitivity"
+      },
+      "motion_state": {
+        "name": "Motion state"
       },
       "motor_thrust": {
         "name": "Motor thrust"
       },
-      "display_brightness": {
-        "name": "Display brightness"
+      "off_led_color": {
+        "name": "Off LED color"
       },
-      "display_orientation": {
-        "name": "Display orientation"
+      "on_led_color": {
+        "name": "On LED color"
       },
-      "hysteresis_mode": {
-        "name": "Hysteresis mode"
+      "operation_mode": {
+        "name": "Operation mode"
       },
-      "speed": {
-        "name": "Speed"
+      "output_mode": {
+        "name": "Output mode"
       },
-      "led_brightness": {
-        "name": "LED brightness"
+      "phase": {
+        "name": "Phase"
       },
-      "alarm_sound_level": {
-        "name": "Alarm sound level"
+      "pilot_wire_mode": {
+        "name": "Pilot wire mode"
       },
-      "alarm_sound_mode": {
-        "name": "Alarm sound mode"
+      "power_on_state": {
+        "name": "Power on state"
       },
-      "external_switch_type": {
-        "name": "External switch type"
+      "presence_sensitivity": {
+        "name": "Presence sensitivity"
       },
-      "switch_indication": {
-        "name": "Switch indication"
+      "preset": {
+        "name": "Preset"
       },
-      "switch_actions": {
-        "name": "Switch actions"
+      "preset_mode": {
+        "name": "Preset mode"
       },
-      "ctrl_sequence_of_oper": {
-        "name": "Control sequence"
+      "regulator_period": {
+        "name": "Regulator period"
       },
-      "displayed_temperature": {
-        "name": "Displayed temperature"
+      "reverse": {
+        "name": "Reverse"
       },
-      "calibration_mode": {
-        "name": "Calibration mode"
+      "screen_orientation": {
+        "name": "Screen orientation"
       },
-      "mode_switch": {
-        "name": "Mode switch"
+      "sensor_mode": {
+        "name": "Sensor mode"
       },
-      "phase": {
-        "name": "Phase"
+      "setpoint_response_time": {
+        "name": "Setpoint response time"
+      },
+      "smart_fan_led_display_levels": {
+        "name": "Smart fan LED display levels"
+      },
+      "speed": {
+        "name": "Speed"
+      },
+      "start_up_on_off": {
+        "name": "Start-up behavior"
+      },
+      "status_indication": {
+        "name": "Status indication"
+      },
+      "switch_actions": {
+        "name": "Switch actions"
+      },
+      "switch_indication": {
+        "name": "Switch indication"
+      },
+      "switch_mode": {
+        "name": "Switch mode"
+      },
+      "switch_type": {
+        "name": "Switch type"
+      },
+      "thermostat_application": {
+        "name": "Thermostat application"
+      },
+      "thermostat_mode": {
+        "name": "Thermostat mode"
+      },
+      "valve_orientation": {
+        "name": "Valve orientation"
+      },
+      "viewing_direction": {
+        "name": "Viewing direction"
+      },
+      "weather_delay": {
+        "name": "Weather delay"
+      },
+      "window_covering_mode": {
+        "name": "Curtain mode"
+      },
+      "work_mode": {
+        "name": "Work mode"
+      },
+      "working_day": {
+        "name": "Working day"
       }
     },
     "sensor": {
+      "ac_frequency": {
+        "name": "AC frequency"
+      },
       "active_power_ph_b": {
         "name": "Power phase B"
       },
       "active_power_ph_c": {
         "name": "Power phase C"
       },
+      "adaptation_run_status": {
+        "name": "Adaptation run status",
+        "state": {
+          "nothing": "[%key:common::state::idle%]",
+          "something": "State"
+        },
+        "state_attributes": {
+          "in_progress": {
+            "name": "In progress"
+          },
+          "run_successful": {
+            "name": "Run successful"
+          },
+          "valve_characteristic_lost": {
+            "name": "Valve characteristic lost"
+          }
+        }
+      },
+      "alarm_state": {
+        "name": "Alarm state"
+      },
       "analog_input": {
         "name": "Analog input"
       },
-      "ac_frequency": {
-        "name": "AC frequency"
+      "average_light_intensity_20mins": {
+        "name": "Average light intensity last 20 min"
       },
-      "soil_moisture": {
-        "name": "Soil moisture"
+      "brightness_level": {
+        "name": "Brightness level"
       },
-      "leaf_wetness": {
-        "name": "Leaf wetness"
+      "control_status": {
+        "name": "Control status"
       },
-      "instantaneous_demand": {
-        "name": "Instantaneous demand"
+      "device_run_time": {
+        "name": "Device run time"
       },
-      "power_factor_ph_b": {
-        "name": "Power factor phase B"
+      "device_status": {
+        "name": "Device status"
       },
-      "power_factor_ph_c": {
-        "name": "Power factor phase C"
+      "device_temperature": {
+        "name": "Device temperature"
       },
-      "rms_current_ph_b": {
-        "name": "Current phase B"
+      "distance": {
+        "name": "Target distance"
       },
-      "rms_current_ph_c": {
-        "name": "Current phase C"
+      "energy_ph_a": {
+        "name": "Energy phase A"
       },
-      "rms_voltage_ph_b": {
-        "name": "Voltage phase B"
+      "energy_ph_b": {
+        "name": "Energy phase B"
       },
-      "rms_voltage_ph_c": {
-        "name": "Voltage phase C"
+      "energy_ph_c": {
+        "name": "Energy phase C"
       },
-      "summation_delivered": {
-        "name": "Summation delivered"
+      "energy_produced": {
+        "name": "Energy produced"
       },
-      "tier1_summation_delivered": {
-        "name": "Tier 1 summation delivered"
+      "energy_produced_ph_a": {
+        "name": "Energy produced phase A"
       },
-      "tier2_summation_delivered": {
-        "name": "Tier 2 summation delivered"
+      "energy_produced_ph_b": {
+        "name": "Energy produced phase B"
       },
-      "tier3_summation_delivered": {
-        "name": "Tier 3 summation delivered"
+      "energy_produced_ph_c": {
+        "name": "Energy produced phase C"
       },
-      "tier4_summation_delivered": {
-        "name": "Tier 4 summation delivered"
+      "error_status": {
+        "name": "Error status"
       },
-      "tier5_summation_delivered": {
-        "name": "Tier 5 summation delivered"
+      "fault_code": {
+        "name": "Fault code"
       },
-      "tier6_summation_delivered": {
-        "name": "Tier 6 summation delivered"
+      "filter_run_time": {
+        "name": "Filter run time"
       },
-      "total_active_power": {
-        "name": "Total power"
+      "formaldehyde": {
+        "name": "Formaldehyde concentration"
       },
-      "summation_received": {
-        "name": "Summation received"
+      "hooks_state": {
+        "name": "Hooks state"
       },
-      "device_temperature": {
-        "name": "Device temperature"
+      "human_motion_state": {
+        "name": "Human motion state"
+      },
+      "humidity_alarm": {
+        "name": "Humidity alarm"
+      },
+      "hvac_action": {
+        "name": "HVAC action"
+      },
+      "instantaneous_demand": {
+        "name": "Instantaneous demand"
       },
       "internal_temp_monitor": {
         "name": "Internal temperature"
       },
-      "overheated": {
-        "name": "Overheat protection"
-      },
-      "formaldehyde": {
-        "name": "Formaldehyde concentration"
+      "irriation_duration_2": {
+        "name": "Irrigation duration 2"
       },
-      "hvac_action": {
-        "name": "HVAC action"
+      "irrigation_duration": {
+        "name": "Last irrigation duration"
       },
-      "rssi": {
-        "name": "RSSI"
+      "irrigation_duration_1": {
+        "name": "Irrigation duration 1"
       },
-      "lqi": {
-        "name": "LQI"
+      "irrigation_end_time": {
+        "name": "Irrigation end time"
       },
-      "timer_time_left": {
-        "name": "Time left"
+      "irrigation_start_time": {
+        "name": "Irrigation start time"
       },
-      "device_run_time": {
-        "name": "Device run time"
+      "last_action": {
+        "name": "Last action",
+        "state": {
+          "lock": "[%key:common::state::locked%]",
+          "unlock": "[%key:common::state::unlocked%]"
+        }
       },
-      "filter_run_time": {
-        "name": "Filter run time"
+      "last_action_source": {
+        "name": "Last action source",
+        "state": {
+          "fingerprint": "Fingerprint",
+          "keypad": "Keypad",
+          "rfid": "RFID",
+          "self": "Self",
+          "zigbee": "Zigbee"
+        }
       },
-      "last_feeding_source": {
-        "name": "Last feeding source"
+      "last_action_user": {
+        "name": "Last action user"
       },
       "last_feeding_size": {
         "name": "Last feeding size"
       },
-      "portions_dispensed_today": {
-        "name": "Portions dispensed today"
-      },
-      "weight_dispensed_today": {
-        "name": "Weight dispensed today"
-      },
-      "smoke_density": {
-        "name": "Smoke density"
+      "last_feeding_source": {
+        "name": "Last feeding source"
       },
       "last_illumination_state": {
         "name": "Last illumination state"
       },
-      "pi_heating_demand": {
-        "name": "Pi heating demand"
-      },
-      "setpoint_change_source": {
-        "name": "Setpoint change source"
+      "last_pin_code": {
+        "name": "Last PIN code"
       },
-      "power_source": {
-        "name": "Power source"
+      "last_valve_open_duration": {
+        "name": "Last valve open duration"
       },
-      "window_covering_type": {
-        "name": "Window covering type"
+      "last_watering_duration": {
+        "name": "Last watering duration"
       },
-      "hooks_state": {
-        "name": "Hooks state"
+      "leaf_wetness": {
+        "name": "Leaf wetness"
       },
-      "open_window_detected": {
-        "name": "Open window detected"
+      "lifetime": {
+        "name": "Lifetime"
+      },
+      "liquid_depth": {
+        "name": "Liquid depth"
+      },
+      "liquid_level_percent": {
+        "name": "Liquid level ratio"
       },
       "load_estimate": {
         "name": "Load estimate"
       },
-      "adaptation_run_status": {
-        "name": "Adaptation run status",
-        "state": {
-          "nothing": "[%key:common::state::idle%]",
-          "something": "State"
-        },
-        "state_attributes": {
-          "in_progress": {
-            "name": "In progress"
-          },
-          "run_successful": {
-            "name": "Run successful"
-          },
-          "valve_characteristic_lost": {
-            "name": "Valve characteristic lost"
-          }
-        }
+      "local_temperature_floor": {
+        "name": "Floor temperature"
+      },
+      "lower_explosive_limit": {
+        "name": "% Lower explosive limit"
+      },
+      "lqi": {
+        "name": "LQI"
+      },
+      "motion_distance": {
+        "name": "Motion distance"
+      },
+      "motor_state": {
+        "name": "Motor state"
+      },
+      "motor_stepcount": {
+        "name": "Motor stepcount"
+      },
+      "open_window_detected": {
+        "name": "Open window detected"
+      },
+      "opening": {
+        "name": "Opening"
+      },
+      "operating_mode": {
+        "name": "Operating mode"
+      },
+      "overheated": {
+        "name": "Overheat protection"
+      },
+      "pi_heating_demand": {
+        "name": "Pi heating demand"
+      },
+      "portions_dispensed_today": {
+        "name": "Portions dispensed today"
+      },
+      "power_factor_ph_b": {
+        "name": "Power factor phase B"
+      },
+      "power_factor_ph_c": {
+        "name": "Power factor phase C"
+      },
+      "power_source": {
+        "name": "Power source"
+      },
+      "power_type": {
+        "name": "Power type"
       },
       "preheat_time": {
         "name": "Pre-heat time"
       },
+      "remaining_watering_time": {
+        "name": "Remaining watering time"
+      },
+      "rms_current_ph_b": {
+        "name": "Current phase B"
+      },
+      "rms_current_ph_c": {
+        "name": "Current phase C"
+      },
+      "rms_voltage_ph_b": {
+        "name": "Voltage phase B"
+      },
+      "rms_voltage_ph_c": {
+        "name": "Voltage phase C"
+      },
+      "rssi": {
+        "name": "RSSI"
+      },
+      "self_test": {
+        "name": "Self-test result"
+      },
+      "self_test_result": {
+        "name": "Self-test result"
+      },
+      "setpoint_change_source": {
+        "name": "Setpoint change source"
+      },
+      "single_watering_amount": {
+        "name": "Single watering amount"
+      },
+      "single_watering_duration": {
+        "name": "Single watering duration"
+      },
+      "smart_irrigation": {
+        "name": "Smart irrigation"
+      },
+      "smoke_density": {
+        "name": "Smoke density"
+      },
       "software_error": {
         "name": "Software error",
         "state": {
@@ -1705,251 +1456,243 @@
           "something": "[%key:common::state::error%]"
         },
         "state_attributes": {
-          "top_pcb_sensor_error": {
-            "name": "Top PCB sensor error"
+          "critical_low_battery": {
+            "name": "Critical low battery"
           },
-          "side_pcb_sensor_error": {
-            "name": "Side PCB sensor error"
+          "encoder_jammed": {
+            "name": "Encoder jammed"
           },
-          "non_volatile_memory_error": {
-            "name": "Non-volatile memory error"
+          "invalid_clock_information": {
+            "name": "Invalid clock information"
           },
-          "unknown_hw_error": {
-            "name": "Unknown HW error"
+          "invalid_internal_communication": {
+            "name": "Invalid internal communication"
+          },
+          "low_battery": {
+            "name": "Low battery"
           },
           "motor_error": {
             "name": "Motor error"
           },
-          "invalid_internal_communication": {
-            "name": "Invalid internal communication"
-          },
-          "invalid_clock_information": {
-            "name": "Invalid clock information"
+          "non_volatile_memory_error": {
+            "name": "Non-volatile memory error"
           },
           "radio_communication_error": {
             "name": "Radio communication error"
           },
-          "encoder_jammed": {
-            "name": "Encoder jammed"
+          "side_pcb_sensor_error": {
+            "name": "Side PCB sensor error"
           },
-          "low_battery": {
-            "name": "Low battery"
+          "top_pcb_sensor_error": {
+            "name": "Top PCB sensor error"
           },
-          "critical_low_battery": {
-            "name": "Critical low battery"
+          "unknown_hw_error": {
+            "name": "Unknown HW error"
           }
         }
       },
-      "motor_stepcount": {
-        "name": "Motor stepcount"
+      "soil_moisture": {
+        "name": "Soil moisture"
       },
-      "irrigation_duration": {
-        "name": "Last irrigation duration"
+      "summation_delivered": {
+        "name": "Summation delivered"
       },
-      "irrigation_start_time": {
-        "name": "Irrigation start time"
+      "summation_received": {
+        "name": "Summation received"
       },
-      "irrigation_end_time": {
-        "name": "Irrigation end time"
+      "surplus_flow": {
+        "name": "Surplus flow"
       },
-      "irrigation_duration_1": {
-        "name": "Irrigation duration 1"
+      "target_distance": {
+        "name": "Target distance"
       },
-      "irriation_duration_2": {
-        "name": "Irrigation duration 2"
+      "temperature_alarm": {
+        "name": "Temperature alarm"
       },
-      "valve_status_1": {
-        "name": "Status 1"
+      "tier1_summation_delivered": {
+        "name": "Tier 1 summation delivered"
       },
-      "valve_status_2": {
-        "name": "Status 2"
+      "tier2_summation_delivered": {
+        "name": "Tier 2 summation delivered"
       },
-      "timer_state": {
-        "name": "Timer state"
+      "tier3_summation_delivered": {
+        "name": "Tier 3 summation delivered"
       },
-      "last_valve_open_duration": {
-        "name": "Last valve open duration"
+      "tier4_summation_delivered": {
+        "name": "Tier 4 summation delivered"
       },
-      "motion_distance": {
-        "name": "Motion distance"
+      "tier5_summation_delivered": {
+        "name": "Tier 5 summation delivered"
       },
-      "control_status": {
-        "name": "Control status"
+      "tier6_summation_delivered": {
+        "name": "Tier 6 summation delivered"
       },
-      "distance": {
-        "name": "Target distance"
+      "time_left": {
+        "name": "Time left"
       },
-      "local_temperature_floor": {
-        "name": "Floor temperature"
+      "timer_state": {
+        "name": "Timer state"
       },
-      "self_test": {
-        "name": "Self-test result"
+      "timer_time_left": {
+        "name": "Time left"
       },
-      "voc_index": {
-        "name": "VOC index"
+      "todays_max_light_intensity": {
+        "name": "Today's max light intensity"
       },
-      "energy_ph_a": {
-        "name": "Energy phase A"
+      "total_active_power": {
+        "name": "Total power"
       },
-      "energy_ph_b": {
-        "name": "Energy phase B"
+      "total_power_factor": {
+        "name": "Total power factor"
       },
-      "energy_ph_c": {
-        "name": "Energy phase C"
+      "valve_adapt_status": {
+        "name": "Valve adaptation status"
       },
-      "energy_produced": {
-        "name": "Energy produced"
+      "valve_duration": {
+        "name": "Irrigation duration"
       },
-      "energy_produced_ph_a": {
-        "name": "Energy produced phase A"
+      "valve_position": {
+        "name": "Valve position"
       },
-      "energy_produced_ph_b": {
-        "name": "Energy produced phase B"
+      "valve_status": {
+        "name": "Valve status"
       },
-      "energy_produced_ph_c": {
-        "name": "Energy produced phase C"
+      "valve_status_1": {
+        "name": "Status 1"
       },
-      "total_power_factor": {
-        "name": "Total power factor"
+      "valve_status_2": {
+        "name": "Status 2"
       },
-      "self_test_result": {
-        "name": "Self-test result"
+      "voc_index": {
+        "name": "VOC index"
       },
-      "lower_explosive_limit": {
-        "name": "% Lower explosive limit"
+      "water_flow": {
+        "name": "Water flow"
       },
-      "liquid_depth": {
-        "name": "Liquid depth"
+      "weight_dispensed_today": {
+        "name": "Weight dispensed today"
       },
-      "liquid_level_percent": {
-        "name": "Liquid level ratio"
+      "window_covering_type": {
+        "name": "Window covering type"
+      }
+    },
+    "switch": {
+      "adaptation_run_enabled": {
+        "name": "Adaptation run enabled"
       },
-      "target_distance": {
-        "name": "Target distance"
+      "auto_clean": {
+        "name": "Autoclean"
       },
-      "human_motion_state": {
-        "name": "Human motion state"
+      "auto_relock": {
+        "name": "Autorelock"
       },
-      "temperature_alarm": {
-        "name": "Temperature alarm"
+      "aux_switch_scenes": {
+        "name": "Aux switch scenes"
       },
-      "humidity_alarm": {
-        "name": "Humidity alarm"
+      "away_mode": {
+        "name": "Away mode"
       },
-      "alarm_state": {
-        "name": "Alarm state"
+      "binding_off_to_on_sync_level": {
+        "name": "Binding off to on sync level"
       },
-      "power_type": {
-        "name": "Power type"
+      "boost_heating": {
+        "name": "Boost heating"
       },
-      "valve_position": {
-        "name": "Valve position"
+      "buzzer_manual_alarm": {
+        "name": "Buzzer manual alarm"
       },
-      "time_left": {
-        "name": "Time left"
+      "buzzer_manual_mute": {
+        "name": "Buzzer manual mute"
       },
-      "valve_status": {
-        "name": "Valve status"
+      "child_lock": {
+        "name": "Child lock"
       },
-      "valve_duration": {
-        "name": "Irrigation duration"
+      "detach_relay": {
+        "name": "Detach relay"
       },
-      "smart_irrigation": {
-        "name": "Smart irrigation"
+      "dimmer_mode": {
+        "name": "Dimmer mode"
       },
-      "surplus_flow": {
-        "name": "Surplus flow"
+      "disable_clear_notifications_double_tap": {
+        "name": "Disable config 2x tap to clear notifications"
       },
-      "single_watering_duration": {
-        "name": "Single watering duration"
+      "disable_led": {
+        "name": "Disable LED"
       },
-      "single_watering_amount": {
-        "name": "Single watering amount"
+      "display_enabled": {
+        "name": "Display enabled"
       },
-      "error_status": {
-        "name": "Error status"
+      "distance_tracking": {
+        "name": "Distance tracking"
       },
-      "brightness_level": {
-        "name": "Brightness level"
+      "double_tap_down_enabled": {
+        "name": "Double tap down enabled"
       },
-      "average_light_intensity_20mins": {
-        "name": "Average light intensity last 20 min"
+      "double_tap_up_enabled": {
+        "name": "Double tap up enabled"
       },
-      "todays_max_light_intensity": {
-        "name": "Today's max light intensity"
+      "double_up_full": {
+        "name": "Double tap on - full"
       },
-      "fault_code": {
-        "name": "Fault code"
+      "enable_pir_mode": {
+        "name": "Enable PIR remote"
       },
-      "water_flow": {
-        "name": "Water flow"
+      "enable_siren": {
+        "name": "Enable siren"
       },
-      "remaining_watering_time": {
-        "name": "Remaining watering time"
+      "enable_tamper_alarm": {
+        "name": "Enable tamper alarm"
       },
-      "last_watering_duration": {
-        "name": "Last watering duration"
+      "external_temperature_sensor": {
+        "name": "External temperature sensor"
       },
-      "device_status": {
-        "name": "Device status"
+      "external_window_sensor": {
+        "name": "External window sensor"
       },
-      "lifetime": {
-        "name": "Lifetime"
+      "factory_reset": {
+        "name": "Factory reset"
       },
-      "last_action_source": {
-        "name": "Last action source",
-        "state": {
-          "zigbee": "Zigbee",
-          "keypad": "Keypad",
-          "fingerprint": "Fingerprint",
-          "rfid": "RFID",
-          "self": "Self"
-        }
+      "find_switch": {
+        "name": "Distance switch"
       },
-      "last_action": {
-        "name": "Last action",
-        "state": {
-          "lock": "[%key:common::state::locked%]",
-          "unlock": "[%key:common::state::unlocked%]"
-        }
+      "firmware_progress_led": {
+        "name": "Firmware progress LED"
       },
-      "last_action_user": {
-        "name": "Last action user"
+      "flip_indicator_light": {
+        "name": "Flip indicator light"
       },
-      "last_pin_code": {
-        "name": "Last PIN code"
+      "frient_com_1": {
+        "name": "COM 1"
       },
-      "opening": {
-        "name": "Opening"
+      "frient_com_2": {
+        "name": "COM 2"
       },
-      "operating_mode": {
-        "name": "Operating mode"
+      "frost_lock": {
+        "name": "Frost lock"
       },
-      "valve_adapt_status": {
-        "name": "Valve adaptation status"
+      "frost_protection": {
+        "name": "Frost protection"
       },
-      "motor_state": {
-        "name": "Motor state"
-      }
-    },
-    "switch": {
-      "switch": {
-        "name": "[%key:component::switch::title%]"
+      "heartbeat_indicator": {
+        "name": "Heartbeat indicator"
       },
-      "window_detection_function": {
-        "name": "Invert window detection"
+      "heat_available": {
+        "name": "Heat available"
       },
-      "trigger_indicator": {
-        "name": "LED trigger indicator"
+      "heating_stop": {
+        "name": "Heating stop"
       },
-      "power_outage_memory": {
-        "name": "Power outage memory"
+      "holiday_mode": {
+        "name": "Holiday mode"
       },
-      "child_lock": {
-        "name": "Child lock"
+      "hooks_locked": {
+        "name": "Hooks locked"
       },
-      "disable_led": {
-        "name": "Disable LED"
+      "humidity_alarm": {
+        "name": "Humidity alarm"
+      },
+      "invert_relay": {
+        "name": "Invert relay"
       },
       "invert_switch": {
         "name": "Invert switch"
@@ -1957,225 +1700,528 @@
       "inverted": {
         "name": "Inverted"
       },
-      "hooks_locked": {
-        "name": "Hooks locked"
-      },
-      "smart_bulb_mode": {
-        "name": "Smart bulb mode"
-      },
-      "smart_fan_mode": {
-        "name": "Smart fan mode"
+      "led_indicator": {
+        "name": "LED indicator"
       },
-      "double_tap_up_enabled": {
-        "name": "Double tap up enabled"
+      "linkage_alarm": {
+        "name": "Linkage alarm"
       },
-      "double_tap_down_enabled": {
-        "name": "Double tap down enabled"
+      "local_protection": {
+        "name": "Local protection"
       },
-      "aux_switch_scenes": {
-        "name": "Aux switch scenes"
+      "mounting_mode": {
+        "name": "Mounting mode"
       },
-      "binding_off_to_on_sync_level": {
-        "name": "Binding off to on sync level"
+      "mute_siren": {
+        "name": "Mute siren"
       },
-      "local_protection": {
-        "name": "Local protection"
+      "on_only_when_dark": {
+        "name": "On only when dark"
       },
       "one_led_mode": {
         "name": "Only 1 LED mode"
       },
-      "firmware_progress_led": {
-        "name": "Firmware progress LED"
+      "open_window": {
+        "name": "Open window"
+      },
+      "output_switch": {
+        "name": "Output switch"
+      },
+      "power_outage_memory": {
+        "name": "Power outage memory"
+      },
+      "prioritize_external_temperature_sensor": {
+        "name": "Prioritize external temperature sensor"
       },
       "relay_click_in_on_off_mode": {
         "name": "Disable relay click in on off mode"
       },
-      "disable_clear_notifications_double_tap": {
-        "name": "Disable config 2x tap to clear notifications"
+      "scale_protection": {
+        "name": "Scale protection"
       },
-      "led_indicator": {
-        "name": "LED indicator"
+      "schedule_enable": {
+        "name": "Schedule enable"
       },
-      "window_detection": {
-        "name": "Window detection"
+      "schedule_mode": {
+        "name": "Schedule mode"
       },
-      "valve_detection": {
-        "name": "Valve detection"
+      "self_test_switch": {
+        "name": "Self-test"
       },
-      "heartbeat_indicator": {
-        "name": "Heartbeat indicator"
+      "show_smiley": {
+        "name": "Show smiley"
       },
-      "linkage_alarm": {
-        "name": "Linkage alarm"
+      "silence_alarm": {
+        "name": "Silence alarm"
       },
-      "buzzer_manual_mute": {
-        "name": "Buzzer manual mute"
+      "siren_on": {
+        "name": "Siren on"
       },
-      "buzzer_manual_alarm": {
-        "name": "Buzzer manual alarm"
+      "smart_bulb_mode": {
+        "name": "Smart bulb mode"
       },
-      "external_window_sensor": {
-        "name": "External window sensor"
+      "smart_fan_mode": {
+        "name": "Smart fan mode"
       },
-      "use_internal_window_detection": {
-        "name": "Use internal window detection"
-      },
-      "mounting_mode": {
-        "name": "Mounting mode"
-      },
-      "prioritize_external_temperature_sensor": {
-        "name": "Prioritize external temperature sensor"
+      "sound_enabled": {
+        "name": "Sound enabled"
       },
-      "heat_available": {
-        "name": "Heat available"
+      "switch": {
+        "name": "[%key:component::switch::title%]"
       },
-      "use_load_balancing": {
-        "name": "Use load balancing"
+      "switch_enabled": {
+        "name": "Switch enabled"
       },
-      "adaptation_run_enabled": {
-        "name": "Adaptation run enabled"
+      "temperature_alarm": {
+        "name": "Temperature alarm"
       },
-      "valve_on_off_1": {
-        "name": "Valve 1"
+      "test_mode": {
+        "name": "Test mode"
       },
-      "valve_on_off_2": {
-        "name": "Valve 2"
+      "total_flow_reset_switch": {
+        "name": "Total flow reset switch"
       },
-      "double_up_full": {
-        "name": "Double tap on - full"
+      "touch_control": {
+        "name": "Touch control"
       },
-      "open_window": {
-        "name": "Open window"
+      "trigger_indicator": {
+        "name": "LED trigger indicator"
       },
       "turbo_mode": {
         "name": "Turbo mode"
       },
-      "detach_relay": {
-        "name": "Detach relay"
-      },
-      "enable_siren": {
-        "name": "Enable siren"
-      },
-      "find_switch": {
-        "name": "Distance switch"
-      },
-      "display_enabled": {
-        "name": "Display enabled"
-      },
-      "show_smiley": {
-        "name": "Show smiley"
-      },
-      "on_only_when_dark": {
-        "name": "On only when dark"
-      },
-      "mute_siren": {
-        "name": "Mute siren"
-      },
-      "self_test_switch": {
-        "name": "Self-test"
+      "turn_on_led_when_off": {
+        "name": "Turn on LED when off"
       },
-      "output_switch": {
-        "name": "Output switch"
+      "turn_on_led_when_on": {
+        "name": "Turn on LED when on"
       },
-      "siren_on": {
-        "name": "Siren on"
+      "use_internal_window_detection": {
+        "name": "Use internal window detection"
       },
-      "enable_tamper_alarm": {
-        "name": "Enable tamper alarm"
+      "use_load_balancing": {
+        "name": "Use load balancing"
       },
-      "temperature_alarm": {
-        "name": "Temperature alarm"
+      "valve_detection": {
+        "name": "Valve detection"
       },
-      "humidity_alarm": {
-        "name": "Humidity alarm"
+      "valve_on_off_1": {
+        "name": "Valve 1"
       },
-      "silence_alarm": {
-        "name": "Silence alarm"
+      "valve_on_off_2": {
+        "name": "Valve 2"
       },
-      "frost_protection": {
-        "name": "Frost protection"
+      "water_shortage_auto_close": {
+        "name": "Water shortage auto-close"
       },
-      "factory_reset": {
-        "name": "Factory reset"
+      "window_detection": {
+        "name": "Window detection"
       },
-      "away_mode": {
-        "name": "Away mode"
+      "window_detection_function": {
+        "name": "Invert window detection"
       },
-      "schedule_enable": {
-        "name": "Schedule enable"
+      "window_open": {
+        "name": "Window open"
+      }
+    }
+  },
+  "issues": {
+    "inconsistent_network_settings": {
+      "fix_flow": {
+        "step": {
+          "init": {
+            "description": "Your Zigbee adapter's network settings are inconsistent with the most recent network backup. This usually happens if another Zigbee integration (e.g. Zigbee2MQTT or deCONZ) has overwritten them.\n\n{diff}\n\nIf you did not intentionally change your network settings, restore from the most recent backup: your devices will not work otherwise.",
+            "menu_option_descriptions": {
+              "restore_old_settings": "This will restore your network settings back to the last working state.",
+              "use_new_settings": "This will keep the new settings written to the stick. Only choose this option if you have intentionally changed settings."
+            },
+            "menu_options": {
+              "restore_old_settings": "Restore backup (recommended)",
+              "use_new_settings": "Keep the new settings"
+            },
+            "title": "[%key:component::zha::issues::inconsistent_network_settings::title%]"
+          }
+        }
       },
-      "scale_protection": {
-        "name": "Scale protection"
+      "title": "Zigbee network settings have changed"
+    },
+    "wrong_silabs_firmware_installed_nabucasa": {
+      "description": "Your Zigbee adapter was previously used with multiprotocol (Zigbee and Thread) and still has multiprotocol firmware installed: ({firmware_type}).\n\nTo run your adapter exclusively with ZHA, you need to install the Zigbee firmware:\n - Go to Settings > System > Hardware, select the device and select Configure.\n - Select the 'Migrate Zigbee to a new adapter' option and follow the instructions.",
+      "title": "Zigbee adapter with multiprotocol firmware detected"
+    },
+    "wrong_silabs_firmware_installed_other": {
+      "description": "Your Zigbee adapter was previously used with multiprotocol (Zigbee and Thread) and still has multiprotocol firmware installed: ({firmware_type}).\n\nTo run your adapter exclusively with ZHA, you need to install Zigbee firmware. Follow your Zigbee adapter manufacturer's instructions for how to do this.",
+      "title": "[%key:component::zha::issues::wrong_silabs_firmware_installed_nabucasa::title%]"
+    }
+  },
+  "options": {
+    "abort": {
+      "cannot_resolve_path": "[%key:component::zha::config::abort::cannot_resolve_path%]",
+      "cannot_restore_backup": "[%key:component::zha::config::abort::cannot_restore_backup%]",
+      "cannot_restore_backup_no_ieee_confirm": "[%key:component::zha::config::abort::cannot_restore_backup_no_ieee_confirm%]",
+      "not_zha_device": "[%key:component::zha::config::abort::not_zha_device%]",
+      "reconfigure_successful": "[%key:component::zha::config::abort::reconfigure_successful%]",
+      "usb_probe_failed": "[%key:component::zha::config::abort::usb_probe_failed%]",
+      "wrong_firmware_installed": "[%key:component::zha::config::abort::wrong_firmware_installed%]"
+    },
+    "error": {
+      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
+      "invalid_backup_json": "[%key:component::zha::config::error::invalid_backup_json%]"
+    },
+    "flow_title": "[%key:component::zha::config::flow_title%]",
+    "step": {
+      "choose_automatic_backup": {
+        "data": {
+          "choose_automatic_backup": "[%key:component::zha::config::step::choose_automatic_backup::data::choose_automatic_backup%]"
+        },
+        "description": "[%key:component::zha::config::step::choose_automatic_backup::description%]",
+        "title": "[%key:component::zha::config::step::choose_automatic_backup::title%]"
       },
-      "frost_lock": {
-        "name": "Frost lock"
+      "choose_formation_strategy": {
+        "description": "[%key:component::zha::config::step::choose_formation_strategy::description%]",
+        "menu_option_descriptions": {
+          "choose_automatic_backup": "[%key:component::zha::config::step::choose_formation_strategy::menu_option_descriptions::choose_automatic_backup%]",
+          "form_initial_network": "[%key:component::zha::config::step::choose_formation_strategy::menu_option_descriptions::form_new_network%]",
+          "form_new_network": "[%key:component::zha::config::step::choose_formation_strategy::menu_option_descriptions::form_new_network%]",
+          "reuse_settings": "[%key:component::zha::config::step::choose_formation_strategy::menu_option_descriptions::reuse_settings%]",
+          "upload_manual_backup": "[%key:component::zha::config::step::choose_formation_strategy::menu_option_descriptions::upload_manual_backup%]"
+        },
+        "menu_options": {
+          "choose_automatic_backup": "[%key:component::zha::config::step::choose_formation_strategy::menu_options::choose_automatic_backup%]",
+          "form_initial_network": "[%key:component::zha::config::step::choose_formation_strategy::menu_options::form_initial_network%]",
+          "form_new_network": "[%key:component::zha::config::step::choose_formation_strategy::menu_options::form_new_network%]",
+          "reuse_settings": "[%key:component::zha::config::step::choose_formation_strategy::menu_options::reuse_settings%]",
+          "upload_manual_backup": "[%key:component::zha::config::step::choose_formation_strategy::menu_options::upload_manual_backup%]"
+        },
+        "title": "[%key:component::zha::config::step::choose_formation_strategy::title%]"
       },
-      "switch_enabled": {
-        "name": "Switch enabled"
+      "choose_migration_strategy": {
+        "description": "[%key:component::zha::config::step::choose_migration_strategy::description%]",
+        "menu_option_descriptions": {
+          "migration_strategy_advanced": "[%key:component::zha::config::step::choose_migration_strategy::menu_option_descriptions::migration_strategy_advanced%]",
+          "migration_strategy_recommended": "[%key:component::zha::config::step::choose_migration_strategy::menu_option_descriptions::migration_strategy_recommended%]"
+        },
+        "menu_options": {
+          "migration_strategy_advanced": "[%key:component::zha::config::step::choose_migration_strategy::menu_options::migration_strategy_advanced%]",
+          "migration_strategy_recommended": "[%key:component::zha::config::step::choose_migration_strategy::menu_options::migration_strategy_recommended%]"
+        },
+        "title": "[%key:component::zha::config::step::choose_migration_strategy::title%]"
       },
-      "total_flow_reset_switch": {
-        "name": "Total flow reset switch"
+      "choose_serial_port": {
+        "data": {
+          "path": "[%key:component::zha::config::step::choose_serial_port::data::path%]"
+        },
+        "description": "[%key:component::zha::config::step::choose_serial_port::description%]",
+        "title": "[%key:component::zha::config::step::choose_serial_port::title%]"
       },
-      "touch_control": {
-        "name": "Touch control"
+      "init": {
+        "description": "A backup will be performed and ZHA will be stopped. Do you wish to continue?",
+        "title": "Reconfigure ZHA"
       },
-      "sound_enabled": {
-        "name": "Sound enabled"
+      "intent_migrate": {
+        "description": "Before plugging in your new adapter, your old adapter needs to be reset. An automatic backup will be performed. If you are using a combined Z-Wave and Zigbee adapter like the HUSBZB-1, this will only reset the Zigbee portion.\n\n*Note: if you are migrating from a **ConBee/RaspBee**, make sure it is running firmware `0x26720700` or newer! Otherwise, some devices may not be controllable after migrating until they are power cycled.*\n\nDo you wish to continue?",
+        "title": "[%key:component::zha::options::step::prompt_migrate_or_reconfigure::menu_options::intent_migrate%]"
       },
-      "invert_relay": {
-        "name": "Invert relay"
+      "manual_pick_radio_type": {
+        "data": {
+          "radio_type": "[%key:component::zha::config::step::manual_pick_radio_type::data::radio_type%]"
+        },
+        "description": "[%key:component::zha::config::step::manual_pick_radio_type::description%]",
+        "title": "[%key:component::zha::config::step::manual_pick_radio_type::data::radio_type%]"
       },
-      "boost_heating": {
-        "name": "Boost heating"
+      "manual_port_config": {
+        "data": {
+          "baudrate": "[%key:component::zha::config::step::manual_port_config::data::baudrate%]",
+          "flow_control": "[%key:component::zha::config::step::manual_port_config::data::flow_control%]",
+          "path": "[%key:component::zha::config::step::manual_port_config::data::path%]"
+        },
+        "description": "[%key:component::zha::config::step::manual_port_config::description%]",
+        "title": "[%key:component::zha::config::step::manual_port_config::title%]"
       },
-      "holiday_mode": {
-        "name": "Holiday mode"
+      "maybe_confirm_ezsp_restore": {
+        "data": {
+          "overwrite_coordinator_ieee": "[%key:component::zha::config::step::maybe_confirm_ezsp_restore::data::overwrite_coordinator_ieee%]"
+        },
+        "description": "[%key:component::zha::config::step::maybe_confirm_ezsp_restore::description%]",
+        "title": "[%key:component::zha::config::step::maybe_confirm_ezsp_restore::title%]"
       },
-      "heating_stop": {
-        "name": "Heating stop"
+      "prompt_migrate_or_reconfigure": {
+        "description": "Are you migrating to a new adapter or re-configuring the current adapter?",
+        "menu_option_descriptions": {
+          "intent_migrate": "This will help you migrate your Zigbee network from your old adapter to a new one.",
+          "intent_reconfigure": "This will let you change the serial port for your current Zigbee adapter."
+        },
+        "menu_options": {
+          "intent_migrate": "Migrate to a new adapter",
+          "intent_reconfigure": "Re-configure the current adapter"
+        },
+        "title": "Migrate or re-configure"
       },
-      "schedule_mode": {
-        "name": "Schedule mode"
+      "upload_manual_backup": {
+        "data": {
+          "uploaded_backup_file": "[%key:component::zha::config::step::upload_manual_backup::data::uploaded_backup_file%]"
+        },
+        "description": "[%key:component::zha::config::step::upload_manual_backup::description%]",
+        "title": "[%key:component::zha::config::step::upload_manual_backup::title%]"
       },
-      "auto_clean": {
-        "name": "Autoclean"
+      "verify_radio": {
+        "description": "[%key:component::zha::config::step::verify_radio::description%]",
+        "title": "[%key:component::zha::config::step::verify_radio::title%]"
+      }
+    }
+  },
+  "services": {
+    "clear_lock_user_code": {
+      "description": "Clears a user code from a lock.",
+      "fields": {
+        "code_slot": {
+          "description": "Code slot to clear code from.",
+          "name": "Code slot"
+        }
       },
-      "test_mode": {
-        "name": "Test mode"
+      "name": "Clear lock user"
+    },
+    "disable_lock_user_code": {
+      "description": "Disables a user code on a lock.",
+      "fields": {
+        "code_slot": {
+          "description": "Code slot to disable.",
+          "name": "[%key:component::zha::services::clear_lock_user_code::fields::code_slot::name%]"
+        }
       },
-      "external_temperature_sensor": {
-        "name": "External temperature sensor"
+      "name": "Disable lock user"
+    },
+    "enable_lock_user_code": {
+      "description": "Enables a user code on a lock.",
+      "fields": {
+        "code_slot": {
+          "description": "Code slot to enable.",
+          "name": "[%key:component::zha::services::clear_lock_user_code::fields::code_slot::name%]"
+        }
       },
-      "auto_relock": {
-        "name": "Autorelock"
+      "name": "Enable lock user"
+    },
+    "issue_zigbee_cluster_command": {
+      "description": "Issues a command on the specified cluster on the specified entity.",
+      "fields": {
+        "args": {
+          "description": "Arguments to pass to the command.",
+          "name": "Args"
+        },
+        "cluster_id": {
+          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_id::description%]",
+          "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_id::name%]"
+        },
+        "cluster_type": {
+          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_type::description%]",
+          "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_type::name%]"
+        },
+        "command": {
+          "description": "ID of the command to execute.",
+          "name": "Command"
+        },
+        "command_type": {
+          "description": "Type of the command to execute.",
+          "name": "Command Type"
+        },
+        "endpoint_id": {
+          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::endpoint_id::description%]",
+          "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::endpoint_id::name%]"
+        },
+        "ieee": {
+          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::ieee::description%]",
+          "name": "[%key:component::zha::services::permit::fields::ieee::name%]"
+        },
+        "manufacturer": {
+          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::manufacturer::description%]",
+          "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::manufacturer::name%]"
+        },
+        "params": {
+          "description": "Parameters to pass to the command.",
+          "name": "Params"
+        }
       },
-      "distance_tracking": {
-        "name": "Distance tracking"
+      "name": "Issue Zigbee cluster command"
+    },
+    "issue_zigbee_group_command": {
+      "description": "Issues a command on the specified cluster on the specified group.",
+      "fields": {
+        "args": {
+          "description": "[%key:component::zha::services::issue_zigbee_cluster_command::fields::args::description%]",
+          "name": "Args"
+        },
+        "cluster_id": {
+          "description": "ZCL cluster to send command to.",
+          "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_id::name%]"
+        },
+        "cluster_type": {
+          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_type::description%]",
+          "name": "Cluster type"
+        },
+        "command": {
+          "description": "[%key:component::zha::services::issue_zigbee_cluster_command::fields::command::description%]",
+          "name": "Command"
+        },
+        "group": {
+          "description": "Hexadecimal address of the group.",
+          "name": "Group"
+        },
+        "manufacturer": {
+          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::manufacturer::description%]",
+          "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::manufacturer::name%]"
+        }
       },
-      "water_shortage_auto_close": {
-        "name": "Water shortage auto-close"
+      "name": "Issue Zigbee group command"
+    },
+    "permit": {
+      "description": "Allows nodes to join the Zigbee network.",
+      "fields": {
+        "duration": {
+          "description": "Time to permit joins.",
+          "name": "Duration"
+        },
+        "ieee": {
+          "description": "IEEE address of the node permitting new joins.",
+          "name": "IEEE"
+        },
+        "install_code": {
+          "description": "Install code of the joining device (must be combined with the 'Source IEEE' field).",
+          "name": "Install code"
+        },
+        "qr_code": {
+          "description": "Provides both the IEEE address and the install code of the joining device (different between vendors).",
+          "name": "QR code"
+        },
+        "source_ieee": {
+          "description": "IEEE address of the joining device (must be combined with the 'Install code' field).",
+          "name": "Source IEEE"
+        }
       },
-      "frient_com_1": {
-        "name": "COM 1"
+      "name": "Permit"
+    },
+    "reconfigure_device": {
+      "description": "Reconfigures a ZHA device (heal device). Use this if you are having issues with the device. If the device in question is a battery-powered device, ensure it is awake and accepting commands when you use this action.",
+      "fields": {
+        "ieee": {
+          "description": "IEEE address of the device to reconfigure.",
+          "name": "[%key:component::zha::services::permit::fields::ieee::name%]"
+        }
       },
-      "frient_com_2": {
-        "name": "COM 2"
+      "name": "Reconfigure device"
+    },
+    "remove": {
+      "description": "Removes a node from the Zigbee network.",
+      "fields": {
+        "ieee": {
+          "description": "IEEE address of the node to remove.",
+          "name": "[%key:component::zha::services::permit::fields::ieee::name%]"
+        }
       },
-      "window_open": {
-        "name": "Window open"
+      "name": "Remove"
+    },
+    "set_lock_user_code": {
+      "description": "Sets a user code on a lock.",
+      "fields": {
+        "code_slot": {
+          "description": "Code slot to set the code in.",
+          "name": "[%key:component::zha::services::clear_lock_user_code::fields::code_slot::name%]"
+        },
+        "user_code": {
+          "description": "Code to set.",
+          "name": "Code"
+        }
       },
-      "turn_on_led_when_off": {
-        "name": "Turn on LED when off"
+      "name": "Set lock user code"
+    },
+    "set_zigbee_cluster_attribute": {
+      "description": "Sets an attribute value for the specified cluster on the specified entity.",
+      "fields": {
+        "attribute": {
+          "description": "ID of the attribute to set.",
+          "name": "Attribute"
+        },
+        "cluster_id": {
+          "description": "ZCL cluster to retrieve attributes for.",
+          "name": "Cluster ID"
+        },
+        "cluster_type": {
+          "description": "Type of the cluster.",
+          "name": "Cluster type"
+        },
+        "endpoint_id": {
+          "description": "Endpoint ID for the cluster.",
+          "name": "Endpoint ID"
+        },
+        "ieee": {
+          "description": "IEEE address for the device.",
+          "name": "[%key:component::zha::services::permit::fields::ieee::name%]"
+        },
+        "manufacturer": {
+          "description": "Manufacturer code. Use a value of \"-1\" to force no code to be set.",
+          "name": "Manufacturer"
+        },
+        "value": {
+          "description": "Value to write to the attribute.",
+          "name": "Value"
+        }
       },
-      "turn_on_led_when_on": {
-        "name": "Turn on LED when on"
+      "name": "Set Zigbee cluster attribute"
+    },
+    "warning_device_squawk": {
+      "description": "This action uses the WD capabilities to emit a quick audible/visible pulse called a \"squawk\". The squawk command has no effect if the WD is currently active (warning in progress).",
+      "fields": {
+        "ieee": {
+          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::ieee::description%]",
+          "name": "[%key:component::zha::services::permit::fields::ieee::name%]"
+        },
+        "level": {
+          "description": "The squawk level field is used as a 2-bit enumeration, and determines the intensity of audible squawk sound as shown in Table 8-26 of the ZCL spec - Squawk Level Field Values.",
+          "name": "Level"
+        },
+        "mode": {
+          "description": "The Squawk Mode field is used as a 4-bit enumeration, and can have one of the values shown in Table 8-24 of the ZCL spec - Squawk Mode Field. The exact operation of each mode (how the WD “squawks”) is implementation specific.",
+          "name": "[%key:common::config_flow::data::mode%]"
+        },
+        "strobe": {
+          "description": "The strobe field is used as a Boolean, and determines if the visual indication is also required in addition to the audible squawk, as shown in Table 8-25 of the ZCL spec - Strobe Bit.",
+          "name": "Strobe"
+        }
       },
-      "dimmer_mode": {
-        "name": "Dimmer mode"
+      "name": "Warning device squawk"
+    },
+    "warning_device_warn": {
+      "description": "This action starts the operation of the warning device. The warning device alerts the surrounding area by audible (siren) and visual (strobe) signals.",
+      "fields": {
+        "duration": {
+          "description": "Requested duration of warning, in seconds (16 bit). If both Strobe and Warning Mode are \"0\" this field is ignored.",
+          "name": "Duration"
+        },
+        "duty_cycle": {
+          "description": "Indicates the length of the flash cycle. This allows you to vary the flash duration for different alarm types (e.g., fire, police, burglar). The valid range is 0-100 in increments of 10. All other values must be rounded to the nearest valid value. Strobe calculates a duty cycle over a duration of one second. The ON state must precede the OFF state. For example, if the Strobe Duty Cycle field specifies “40,”, then the strobe flashes ON for 4/10ths of a second and then turns OFF for 6/10ths of a second.",
+          "name": "Duty cycle"
+        },
+        "ieee": {
+          "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::ieee::description%]",
+          "name": "[%key:component::zha::services::permit::fields::ieee::name%]"
+        },
+        "intensity": {
+          "description": "Indicates the intensity of the strobe as shown in Table 8-23 of the ZCL spec. This attribute is designed to vary the output of the strobe (i.e., brightness) and not its frequency, which is detailed in section 8.4.2.3.1.6 of the ZCL spec.",
+          "name": "Intensity"
+        },
+        "level": {
+          "description": "The Siren Level field is used as a 2-bit enumeration, and indicates the intensity of audible squawk sound as shown in Table 8-22 of the ZCL spec.",
+          "name": "Level"
+        },
+        "mode": {
+          "description": "The Warning Mode field is used as a 4-bit enumeration, can have one of the values 0-6 defined below in table 8-20 of the ZCL spec. The exact behavior of the warning device in each mode is according to the relevant security standards.",
+          "name": "[%key:common::config_flow::data::mode%]"
+        },
+        "strobe": {
+          "description": "The Strobe field is used as a 2-bit enumeration, and determines if the visual indication is required in addition to the audible siren, as indicated in Table 8-21 of the ZCL spec. \"0\" means no strobe, \"1\" means strobe. If the strobe field is “1” and the Warning Mode is “0” (“Stop”), then only the strobe is activated.",
+          "name": "[%key:component::zha::services::warning_device_squawk::fields::strobe::name%]"
+        }
       },
-      "flip_indicator_light": {
-        "name": "Flip indicator light"
-      }
+      "name": "Warning device starts alert"
     }
   }
 }