hdiffpatch 1.0.0__cp310-cp310-win32.whl

hdiffpatch/_c_src/libdeflate/lib/deflate_compress.c

@@ -0,0 +1,4394 @@
+/*
+ * deflate_compress.c - a compressor for DEFLATE
+ *
+ * Copyright 2016 Eric Biggers
+ *
+ * Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "deflate_compress.h"
+#include "deflate_constants.h"
+
+/******************************************************************************/
+
+/*
+ * The following parameters can be changed at build time to customize the
+ * compression algorithms slightly:
+ *
+ * (Note, not all customizable parameters are here.  Some others can be found in
+ * libdeflate_alloc_compressor() and in *_matchfinder.h.)
+ */
+
+/*
+ * If this parameter is defined to 1, then the near-optimal parsing algorithm
+ * will be included, and compression levels 10-12 will use it.  This algorithm
+ * usually produces a compression ratio significantly better than the other
+ * algorithms.  However, it is slow.  If this parameter is defined to 0, then
+ * levels 10-12 will be the same as level 9 and will use the lazy2 algorithm.
+ */
+#define SUPPORT_NEAR_OPTIMAL_PARSING	1
+
+/*
+ * This is the minimum block length that the compressor will use, in
+ * uncompressed bytes.  This should be a value below which using shorter blocks
+ * is unlikely to be worthwhile, due to the per-block overhead.  This value does
+ * not apply to the final block, which may be shorter than this (if the input is
+ * shorter, it will have to be), or to the final uncompressed block in a series
+ * of uncompressed blocks that cover more than UINT16_MAX bytes.
+ *
+ * This value is also approximately the amount by which what would otherwise be
+ * the second-to-last block is allowed to grow past the soft maximum length in
+ * order to avoid having to use a very short final block.
+ *
+ * Defining a fixed minimum block length is needed in order to guarantee a
+ * reasonable upper bound on the compressed size.  It's also needed because our
+ * block splitting algorithm doesn't work well on very short blocks.
+ */
+#define MIN_BLOCK_LENGTH	5000
+
+/*
+ * For the greedy, lazy, lazy2, and near-optimal compressors: This is the soft
+ * maximum block length, in uncompressed bytes.  The compressor will try to end
+ * blocks at this length, but it may go slightly past it if there is a match
+ * that straddles this limit or if the input data ends soon after this limit.
+ * This parameter doesn't apply to uncompressed blocks, which the DEFLATE format
+ * limits to 65535 bytes.
+ *
+ * This should be a value above which it is very likely that splitting the block
+ * would produce a better compression ratio.  For the near-optimal compressor,
+ * increasing/decreasing this parameter will increase/decrease per-compressor
+ * memory usage linearly.
+ */
+#define SOFT_MAX_BLOCK_LENGTH	300000
+
+/*
+ * For the greedy, lazy, and lazy2 compressors: this is the length of the
+ * sequence store, which is an array where the compressor temporarily stores
+ * matches that it's going to use in the current block.  This value is the
+ * maximum number of matches that can be used in a block.  If the sequence store
+ * fills up, then the compressor will be forced to end the block early.  This
+ * value should be large enough so that this rarely happens, due to the block
+ * being ended normally before then.  Increasing/decreasing this value will
+ * increase/decrease per-compressor memory usage linearly.
+ */
+#define SEQ_STORE_LENGTH	50000
+
+/*
+ * For deflate_compress_fastest(): This is the soft maximum block length.
+ * deflate_compress_fastest() doesn't use the regular block splitting algorithm;
+ * it only ends blocks when they reach FAST_SOFT_MAX_BLOCK_LENGTH bytes or
+ * FAST_SEQ_STORE_LENGTH matches.  Therefore, this value should be lower than
+ * the regular SOFT_MAX_BLOCK_LENGTH.
+ */
+#define FAST_SOFT_MAX_BLOCK_LENGTH	65535
+
+/*
+ * For deflate_compress_fastest(): this is the length of the sequence store.
+ * This is like SEQ_STORE_LENGTH, but this should be a lower value.
+ */
+#define FAST_SEQ_STORE_LENGTH	8192
+
+/*
+ * These are the maximum codeword lengths, in bits, the compressor will use for
+ * each Huffman code.  The DEFLATE format defines limits for these.  However,
+ * further limiting litlen codewords to 14 bits is beneficial, since it has
+ * negligible effect on compression ratio but allows some optimizations when
+ * outputting bits.  (It allows 4 literals to be written at once rather than 3.)
+ */
+#define MAX_LITLEN_CODEWORD_LEN		14
+#define MAX_OFFSET_CODEWORD_LEN		DEFLATE_MAX_OFFSET_CODEWORD_LEN
+#define MAX_PRE_CODEWORD_LEN		DEFLATE_MAX_PRE_CODEWORD_LEN
+
+#if SUPPORT_NEAR_OPTIMAL_PARSING
+
+/* Parameters specific to the near-optimal parsing algorithm */
+
+/*
+ * BIT_COST is a scaling factor that allows the near-optimal compressor to
+ * consider fractional bit costs when deciding which literal/match sequence to
+ * use.  This is useful when the true symbol costs are unknown.  For example, if
+ * the compressor thinks that a symbol has 6.5 bits of entropy, it can set its
+ * cost to 6.5 bits rather than have to use 6 or 7 bits.  Although in the end
+ * each symbol will use a whole number of bits due to the Huffman coding,
+ * considering fractional bits can be helpful due to the limited information.
+ *
+ * BIT_COST should be a power of 2.  A value of 8 or 16 works well.  A higher
+ * value isn't very useful since the calculations are approximate anyway.
+ *
+ * BIT_COST doesn't apply to deflate_flush_block() and
+ * deflate_compute_true_cost(), which consider whole bits.
+ */
+#define BIT_COST	16
+
+/*
+ * The NOSTAT_BITS value for a given alphabet is the number of bits assumed to
+ * be needed to output a symbol that was unused in the previous optimization
+ * pass.  Assigning a default cost allows the symbol to be used in the next
+ * optimization pass.  However, the cost should be relatively high because the
+ * symbol probably won't be used very many times (if at all).
+ */
+#define LITERAL_NOSTAT_BITS	13
+#define LENGTH_NOSTAT_BITS	13
+#define OFFSET_NOSTAT_BITS	10
+
+/*
+ * This is (slightly less than) the maximum number of matches that the
+ * near-optimal compressor will cache per block.  This behaves similarly to
+ * SEQ_STORE_LENGTH for the other compressors.
+ */
+#define MATCH_CACHE_LENGTH	(SOFT_MAX_BLOCK_LENGTH * 5)
+
+#endif /* SUPPORT_NEAR_OPTIMAL_PARSING */
+
+/******************************************************************************/
+
+/* Include the needed matchfinders. */
+#define MATCHFINDER_WINDOW_ORDER	DEFLATE_WINDOW_ORDER
+#include "hc_matchfinder.h"
+#include "ht_matchfinder.h"
+#if SUPPORT_NEAR_OPTIMAL_PARSING
+#  include "bt_matchfinder.h"
+/*
+ * This is the maximum number of matches the binary trees matchfinder can find
+ * at a single position.  Since the matchfinder never finds more than one match
+ * for the same length, presuming one of each possible length is sufficient for
+ * an upper bound.  (This says nothing about whether it is worthwhile to
+ * consider so many matches; this is just defining the worst case.)
+ */
+#define MAX_MATCHES_PER_POS	\
+	(DEFLATE_MAX_MATCH_LEN - DEFLATE_MIN_MATCH_LEN + 1)
+#endif
+
+/*
+ * The largest block length we will ever use is when the final block is of
+ * length SOFT_MAX_BLOCK_LENGTH + MIN_BLOCK_LENGTH - 1, or when any block is of
+ * length SOFT_MAX_BLOCK_LENGTH + 1 + DEFLATE_MAX_MATCH_LEN.  The latter case
+ * occurs when the lazy2 compressor chooses two literals and a maximum-length
+ * match, starting at SOFT_MAX_BLOCK_LENGTH - 1.
+ */
+#define MAX_BLOCK_LENGTH	\
+	MAX(SOFT_MAX_BLOCK_LENGTH + MIN_BLOCK_LENGTH - 1,	\
+	    SOFT_MAX_BLOCK_LENGTH + 1 + DEFLATE_MAX_MATCH_LEN)
+
+static forceinline void
+check_buildtime_parameters(void)
+{
+	/*
+	 * Verify that MIN_BLOCK_LENGTH is being honored, as
+	 * libdeflate_deflate_compress_bound() depends on it.
+	 */
+	STATIC_ASSERT(SOFT_MAX_BLOCK_LENGTH >= MIN_BLOCK_LENGTH);
+	STATIC_ASSERT(FAST_SOFT_MAX_BLOCK_LENGTH >= MIN_BLOCK_LENGTH);
+	STATIC_ASSERT(SEQ_STORE_LENGTH * DEFLATE_MIN_MATCH_LEN >=
+		      MIN_BLOCK_LENGTH);
+	STATIC_ASSERT(FAST_SEQ_STORE_LENGTH * HT_MATCHFINDER_MIN_MATCH_LEN >=
+		      MIN_BLOCK_LENGTH);
+#if SUPPORT_NEAR_OPTIMAL_PARSING
+	STATIC_ASSERT(MIN_BLOCK_LENGTH * MAX_MATCHES_PER_POS <=
+		      MATCH_CACHE_LENGTH);
+#endif
+
+	/* The definition of MAX_BLOCK_LENGTH assumes this. */
+	STATIC_ASSERT(FAST_SOFT_MAX_BLOCK_LENGTH <= SOFT_MAX_BLOCK_LENGTH);
+
+	/* Verify that the sequence stores aren't uselessly large. */
+	STATIC_ASSERT(SEQ_STORE_LENGTH * DEFLATE_MIN_MATCH_LEN <=
+		      SOFT_MAX_BLOCK_LENGTH + MIN_BLOCK_LENGTH);
+	STATIC_ASSERT(FAST_SEQ_STORE_LENGTH * HT_MATCHFINDER_MIN_MATCH_LEN <=
+		      FAST_SOFT_MAX_BLOCK_LENGTH + MIN_BLOCK_LENGTH);
+
+	/* Verify that the maximum codeword lengths are valid. */
+	STATIC_ASSERT(
+		MAX_LITLEN_CODEWORD_LEN <= DEFLATE_MAX_LITLEN_CODEWORD_LEN);
+	STATIC_ASSERT(
+		MAX_OFFSET_CODEWORD_LEN <= DEFLATE_MAX_OFFSET_CODEWORD_LEN);
+	STATIC_ASSERT(
+		MAX_PRE_CODEWORD_LEN <= DEFLATE_MAX_PRE_CODEWORD_LEN);
+	STATIC_ASSERT(
+		(1U << MAX_LITLEN_CODEWORD_LEN) >= DEFLATE_NUM_LITLEN_SYMS);
+	STATIC_ASSERT(
+		(1U << MAX_OFFSET_CODEWORD_LEN) >= DEFLATE_NUM_OFFSET_SYMS);
+	STATIC_ASSERT(
+		(1U << MAX_PRE_CODEWORD_LEN) >= DEFLATE_NUM_PRECODE_SYMS);
+}
+
+/******************************************************************************/
+
+/* Table: length slot => length slot base value */
+static const unsigned deflate_length_slot_base[] = {
+	3,    4,    5,    6,    7,    8,    9,    10,
+	11,   13,   15,   17,   19,   23,   27,   31,
+	35,   43,   51,   59,   67,   83,   99,   115,
+	131,  163,  195,  227,  258,
+};
+
+/* Table: length slot => number of extra length bits */
+static const u8 deflate_extra_length_bits[] = {
+	0,    0,    0,    0,    0,    0,    0,    0,
+	1,    1,    1,    1,    2,    2,    2,    2,
+	3,    3,    3,    3,    4,    4,    4,    4,
+	5,    5,    5,    5,    0,
+};
+
+/* Table: offset slot => offset slot base value */
+static const unsigned deflate_offset_slot_base[] = {
+	1,     2,     3,     4,     5,     7,     9,     13,
+	17,    25,    33,    49,    65,    97,    129,   193,
+	257,   385,   513,   769,   1025,  1537,  2049,  3073,
+	4097,  6145,  8193,  12289, 16385, 24577,
+};
+
+/* Table: offset slot => number of extra offset bits */
+static const u8 deflate_extra_offset_bits[] = {
+	0,     0,     0,     0,     1,     1,     2,     2,
+	3,     3,     4,     4,     5,     5,     6,     6,
+	7,     7,     8,     8,     9,     9,     10,    10,
+	11,    11,    12,    12,    13,    13,
+};
+
+/* Table: length => length slot */
+static const u8 deflate_length_slot[DEFLATE_MAX_MATCH_LEN + 1] = {
+	0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 12,
+	12, 13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16,
+	16, 16, 16, 17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18,
+	18, 19, 19, 19, 19, 19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20,
+	20, 20, 20, 20, 20, 20, 20, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21,
+	21, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22,
+	22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23,
+	23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+	24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 25, 25, 25,
+	25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+	25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26,
+	26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+	26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+	27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+	27, 27, 28,
+};
+
+/*
+ * Table: 'offset - 1 => offset_slot' for offset <= 256.
+ * This was generated by scripts/gen_offset_slot_map.py.
+ */
+static const u8 deflate_offset_slot[256] = {
+	0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7,
+	8, 8, 8, 8, 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9,
+	10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10,
+	11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
+	12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
+	12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
+	13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
+	13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
+	14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+	14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+	14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+	14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+	15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+	15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+	15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+	15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+};
+
+/* The order in which precode codeword lengths are stored */
+static const u8 deflate_precode_lens_permutation[DEFLATE_NUM_PRECODE_SYMS] = {
+	16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15
+};
+
+/* Table: precode symbol => number of extra bits */
+static const u8 deflate_extra_precode_bits[DEFLATE_NUM_PRECODE_SYMS] = {
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 3, 7
+};
+
+/* Codewords for the DEFLATE Huffman codes */
+struct deflate_codewords {
+	u32 litlen[DEFLATE_NUM_LITLEN_SYMS];
+	u32 offset[DEFLATE_NUM_OFFSET_SYMS];
+};
+
+/*
+ * Codeword lengths (in bits) for the DEFLATE Huffman codes.
+ * A zero length means the corresponding symbol had zero frequency.
+ */
+struct deflate_lens {
+	u8 litlen[DEFLATE_NUM_LITLEN_SYMS];
+	u8 offset[DEFLATE_NUM_OFFSET_SYMS];
+};
+
+/* Codewords and lengths for the DEFLATE Huffman codes */
+struct deflate_codes {
+	struct deflate_codewords codewords;
+	struct deflate_lens lens;
+};
+
+/* Symbol frequency counters for the DEFLATE Huffman codes */
+struct deflate_freqs {
+	u32 litlen[DEFLATE_NUM_LITLEN_SYMS];
+	u32 offset[DEFLATE_NUM_OFFSET_SYMS];
+};
+
+/*
+ * Represents a run of literals followed by a match or end-of-block.  This
+ * struct is needed to temporarily store items chosen by the parser, since items
+ * cannot be written until all items for the block have been chosen and the
+ * block's Huffman codes have been computed.
+ */
+struct deflate_sequence {
+
+	/*
+	 * Bits 0..22: the number of literals in this run.  This may be 0 and
+	 * can be at most MAX_BLOCK_LENGTH.  The literals are not stored
+	 * explicitly in this structure; instead, they are read directly from
+	 * the uncompressed data.
+	 *
+	 * Bits 23..31: the length of the match which follows the literals, or 0
+	 * if this literal run was the last in the block, so there is no match
+	 * which follows it.
+	 */
+#define SEQ_LENGTH_SHIFT 23
+#define SEQ_LITRUNLEN_MASK (((u32)1 << SEQ_LENGTH_SHIFT) - 1)
+	u32 litrunlen_and_length;
+
+	/*
+	 * If 'length' doesn't indicate end-of-block, then this is the offset of
+	 * the match which follows the literals.
+	 */
+	u16 offset;
+
+	/*
+	 * If 'length' doesn't indicate end-of-block, then this is the offset
+	 * slot of the match which follows the literals.
+	 */
+	u16 offset_slot;
+};
+
+#if SUPPORT_NEAR_OPTIMAL_PARSING
+
+/* Costs for the near-optimal parsing algorithm */
+struct deflate_costs {
+
+	/* The cost to output each possible literal */
+	u32 literal[DEFLATE_NUM_LITERALS];
+
+	/* The cost to output each possible match length */
+	u32 length[DEFLATE_MAX_MATCH_LEN + 1];
+
+	/* The cost to output a match offset of each possible offset slot */
+	u32 offset_slot[DEFLATE_NUM_OFFSET_SYMS];
+};
+
+/*
+ * This structure represents a byte position in the input data and a node in the
+ * graph of possible match/literal choices for the current block.
+ *
+ * Logically, each incoming edge to this node is labeled with a literal or a
+ * match that can be taken to reach this position from an earlier position; and
+ * each outgoing edge from this node is labeled with a literal or a match that
+ * can be taken to advance from this position to a later position.
+ *
+ * But these "edges" are actually stored elsewhere (in 'match_cache').  Here we
+ * associate with each node just two pieces of information:
+ *
+ *	'cost_to_end' is the minimum cost to reach the end of the block from
+ *	this position.
+ *
+ *	'item' represents the literal or match that must be chosen from here to
+ *	reach the end of the block with the minimum cost.  Equivalently, this
+ *	can be interpreted as the label of the outgoing edge on the minimum-cost
+ *	path to the "end of block" node from this node.
+ */
+struct deflate_optimum_node {
+
+	u32 cost_to_end;
+
+	/*
+	 * Notes on the match/literal representation used here:
+	 *
+	 *	The low bits of 'item' are the length: 1 if this is a literal,
+	 *	or the match length if this is a match.
+	 *
+	 *	The high bits of 'item' are the actual literal byte if this is a
+	 *	literal, or the match offset if this is a match.
+	 */
+#define OPTIMUM_OFFSET_SHIFT 9
+#define OPTIMUM_LEN_MASK (((u32)1 << OPTIMUM_OFFSET_SHIFT) - 1)
+	u32 item;
+
+};
+
+#endif /* SUPPORT_NEAR_OPTIMAL_PARSING */
+
+/* Block split statistics.  See "Block splitting algorithm" below. */
+#define NUM_LITERAL_OBSERVATION_TYPES 8
+#define NUM_MATCH_OBSERVATION_TYPES 2
+#define NUM_OBSERVATION_TYPES (NUM_LITERAL_OBSERVATION_TYPES + \
+			       NUM_MATCH_OBSERVATION_TYPES)
+#define NUM_OBSERVATIONS_PER_BLOCK_CHECK 512
+struct block_split_stats {
+	u32 new_observations[NUM_OBSERVATION_TYPES];
+	u32 observations[NUM_OBSERVATION_TYPES];
+	u32 num_new_observations;
+	u32 num_observations;
+};
+
+struct deflate_output_bitstream;
+
+/*
+ * The type for the bitbuffer variable, which temporarily holds bits that are
+ * being packed into bytes and written to the output buffer.  For best
+ * performance, this should have size equal to a machine word.
+ */
+typedef machine_word_t bitbuf_t;
+
+/* The main DEFLATE compressor structure */
+struct libdeflate_compressor {
+
+	/* Pointer to the compress() implementation chosen at allocation time */
+	void (*impl)(struct libdeflate_compressor *restrict c,const u8* in_block_with_dict,size_t dict_nbytes,
+		     size_t in_nbytes,size_t in_border_nbytes,struct deflate_output_bitstream *os);
+
+	/* The free() function for this struct, chosen at allocation time */
+	free_func_t free_func;
+
+	/* The compression level with which this compressor was created */
+	unsigned compression_level;
+	bool     in_is_final_block;
+	bool     lazy2;
+	unsigned bitcount_back_for_block;
+	bitbuf_t bitbuf_back_for_block;
+	size_t   dict_pos_for_blocks_continue;
+	size_t   slide_pos_for_blocks_continue;
+	u32 	 next_hashes_for_blocks_continue0;
+	u32 	 next_hashes_for_blocks_continue1;
+
+	/* Anything of this size or less we won't bother trying to compress. */
+	size_t max_passthrough_size;
+
+	/*
+	 * The maximum search depth: consider at most this many potential
+	 * matches at each position
+	 */
+	unsigned max_search_depth;
+
+	/*
+	 * The "nice" match length: if a match of this length is found, choose
+	 * it immediately without further consideration
+	 */
+	unsigned nice_match_length;
+
+	/* Frequency counters for the current block */
+	struct deflate_freqs freqs;
+
+	/* Block split statistics for the current block */
+	struct block_split_stats split_stats;
+
+	/* Dynamic Huffman codes for the current block */
+	struct deflate_codes codes;
+
+	/* The static Huffman codes defined by the DEFLATE format */
+	struct deflate_codes static_codes;
+
+	/* Temporary space for block flushing */
+	union {
+		/* Information about the precode */
+		struct {
+			u32 freqs[DEFLATE_NUM_PRECODE_SYMS];
+			u32 codewords[DEFLATE_NUM_PRECODE_SYMS];
+			u8 lens[DEFLATE_NUM_PRECODE_SYMS];
+			unsigned items[DEFLATE_NUM_LITLEN_SYMS +
+				       DEFLATE_NUM_OFFSET_SYMS];
+			unsigned num_litlen_syms;
+			unsigned num_offset_syms;
+			unsigned num_explicit_lens;
+			unsigned num_items;
+		} precode;
+		/*
+		 * The "full" length codewords.  Used only after the information
+		 * in 'precode' is no longer needed.
+		 */
+		struct {
+			u32 codewords[DEFLATE_MAX_MATCH_LEN + 1];
+			u8 lens[DEFLATE_MAX_MATCH_LEN + 1];
+		} length;
+	} o;
+
+	union {
+		/* Data for greedy or lazy parsing */
+		struct {
+			/* Hash chains matchfinder */
+			struct hc_matchfinder hc_mf;
+
+			/* Matches and literals chosen for the current block */
+			struct deflate_sequence sequences[SEQ_STORE_LENGTH + 1];
+
+		} g; /* (g)reedy */
+
+		/* Data for fastest parsing */
+		struct {
+			/* Hash table matchfinder */
+			struct ht_matchfinder ht_mf;
+
+			/* Matches and literals chosen for the current block */
+			struct deflate_sequence sequences[
+						FAST_SEQ_STORE_LENGTH + 1];
+
+		} f; /* (f)astest */
+
+	#if SUPPORT_NEAR_OPTIMAL_PARSING
+		/* Data for near-optimal parsing */
+		struct {
+
+			/* Binary tree matchfinder */
+			struct bt_matchfinder bt_mf;
+
+			/*
+			 * Cached matches for the current block.  This array
+			 * contains the matches that were found at each position
+			 * in the block.  Specifically, for each position, there
+			 * is a list of matches found at that position, if any,
+			 * sorted by strictly increasing length.  In addition,
+			 * following the matches for each position, there is a
+			 * special 'struct lz_match' whose 'length' member
+			 * contains the number of matches found at that
+			 * position, and whose 'offset' member contains the
+			 * literal at that position.
+			 *
+			 * Note: in rare cases, there will be a very high number
+			 * of matches in the block and this array will overflow.
+			 * If this happens, we force the end of the current
+			 * block.  MATCH_CACHE_LENGTH is the length at which we
+			 * actually check for overflow.  The extra slots beyond
+			 * this are enough to absorb the worst case overflow,
+			 * which occurs if starting at
+			 * &match_cache[MATCH_CACHE_LENGTH - 1], we write
+			 * MAX_MATCHES_PER_POS matches and a match count header,
+			 * then skip searching for matches at
+			 * 'DEFLATE_MAX_MATCH_LEN - 1' positions and write the
+			 * match count header for each.
+			 */
+			struct lz_match match_cache[MATCH_CACHE_LENGTH +
+						    MAX_MATCHES_PER_POS +
+						    DEFLATE_MAX_MATCH_LEN - 1];
+
+			/*
+			 * Array of nodes, one per position, for running the
+			 * minimum-cost path algorithm.
+			 *
+			 * This array must be large enough to accommodate the
+			 * worst-case number of nodes, which is MAX_BLOCK_LENGTH
+			 * plus 1 for the end-of-block node.
+			 */
+			struct deflate_optimum_node optimum_nodes[
+				MAX_BLOCK_LENGTH + 1];
+
+			/* The current cost model being used */
+			struct deflate_costs costs;
+
+			/* Saved cost model */
+			struct deflate_costs costs_saved;
+
+			/*
+			 * A table that maps match offset to offset slot.  This
+			 * differs from deflate_offset_slot[] in that this is a
+			 * full map, not a condensed one.  The full map is more
+			 * appropriate for the near-optimal parser, since the
+			 * near-optimal parser does more offset => offset_slot
+			 * translations, it doesn't intersperse them with
+			 * matchfinding (so cache evictions are less of a
+			 * concern), and it uses more memory anyway.
+			 */
+			u8 offset_slot_full[DEFLATE_MAX_MATCH_OFFSET + 1];
+
+			/* Literal/match statistics saved from previous block */
+			u32 prev_observations[NUM_OBSERVATION_TYPES];
+			u32 prev_num_observations;
+
+			/*
+			 * Approximate match length frequencies based on a
+			 * greedy parse, gathered during matchfinding.  This is
+			 * used for setting the initial symbol costs.
+			 */
+			u32 new_match_len_freqs[DEFLATE_MAX_MATCH_LEN + 1];
+			u32 match_len_freqs[DEFLATE_MAX_MATCH_LEN + 1];
+
+			/*
+			 * The maximum number of optimization passes
+			 * (min-cost path searches) per block.
+			 * Larger values = more compression.
+			 */
+			unsigned max_optim_passes;
+
+			/*
+			 * If an optimization pass improves the cost by fewer
+			 * than this number of bits, then optimization will stop
+			 * early, before max_optim_passes has been reached.
+			 * Smaller values = more compression.
+			 */
+			unsigned min_improvement_to_continue;
+
+			/*
+			 * The minimum number of bits that would need to be
+			 * saved for it to be considered worth the time to
+			 * regenerate and use the min-cost path from a previous
+			 * optimization pass, in the case where the final
+			 * optimization pass actually increased the cost.
+			 * Smaller values = more compression.
+			 */
+			unsigned min_bits_to_use_nonfinal_path;
+
+			/*
+			 * The maximum block length, in uncompressed bytes, at
+			 * which to find and consider the optimal match/literal
+			 * list for the static Huffman codes.  This strategy
+			 * improves the compression ratio produced by static
+			 * Huffman blocks and can discover more cases in which
+			 * static blocks are worthwhile.  This helps mostly with
+			 * small blocks, hence why this parameter is a max_len.
+			 *
+			 * Above this block length, static Huffman blocks are
+			 * only used opportunistically.  I.e. a static Huffman
+			 * block is only used if a static block using the same
+			 * match/literal list as the optimized dynamic block
+			 * happens to be cheaper than the dynamic block itself.
+			 */
+			unsigned max_len_to_optimize_static_block;
+
+		} n; /* (n)ear-optimal */
+	#endif /* SUPPORT_NEAR_OPTIMAL_PARSING */
+
+	} p; /* (p)arser */
+};
+
+static forceinline void _compress_block_reset(struct libdeflate_compressor* c){
+	c->bitbuf_back_for_block=0;
+	c->bitcount_back_for_block=0;
+	c->dict_pos_for_blocks_continue=~(size_t)0;
+	c->slide_pos_for_blocks_continue=0;
+}
+
+/*
+ * The capacity of the bitbuffer, in bits.  This is 1 less than the real size,
+ * in order to avoid undefined behavior when doing bitbuf >>= bitcount & ~7.
+ */
+#define BITBUF_NBITS	(8 * sizeof(bitbuf_t) - 1)
+
+/*
+ * Can the specified number of bits always be added to 'bitbuf' after any
+ * pending bytes have been flushed?  There can be up to 7 bits remaining after a
+ * flush, so the count must not exceed BITBUF_NBITS after adding 'n' more bits.
+ */
+#define CAN_BUFFER(n)	(7 + (n) <= BITBUF_NBITS)
+
+/*
+ * Structure to keep track of the current state of sending bits to the
+ * compressed output buffer
+ */
+struct deflate_output_bitstream {
+
+	/* Bits that haven't yet been written to the output buffer */
+	bitbuf_t bitbuf;
+
+	/*
+	 * Number of bits currently held in @bitbuf.  This can be between 0 and
+	 * BITBUF_NBITS in general, or between 0 and 7 after a flush.
+	 */
+	unsigned bitcount;
+
+	/*
+	 * Pointer to the position in the output buffer at which the next byte
+	 * should be written
+	 */
+	u8 *next;
+
+	/* Pointer to the end of the output buffer */
+	u8 *end;
+
+	/* true if the output buffer ran out of space */
+	bool overflow;
+};
+
+/*
+ * Add some bits to the bitbuffer variable of the output bitstream.  The caller
+ * must ensure that 'bitcount + n <= BITBUF_NBITS', by calling FLUSH_BITS()
+ * frequently enough.
+ */
+#define ADD_BITS(bits, n)			\
+do {						\
+	bitbuf |= (bitbuf_t)(bits) << bitcount;	\
+	bitcount += (n);			\
+	ASSERT(bitcount <= BITBUF_NBITS);	\
+} while (0)
+
+/*
+ * Flush bits from the bitbuffer variable to the output buffer.  After this, the
+ * bitbuffer will contain at most 7 bits (a partial byte).
+ *
+ * Since deflate_flush_block() verified ahead of time that there is enough space
+ * remaining before actually writing the block, it's guaranteed that out_next
+ * won't exceed os->end.  However, there might not be enough space remaining to
+ * flush a whole word, even though that's fastest.  Therefore, flush a whole
+ * word if there is space for it, otherwise flush a byte at a time.
+ */
+#define FLUSH_BITS()							\
+do {									\
+	if (UNALIGNED_ACCESS_IS_FAST && likely(out_next < out_fast_end)) { \
+		/* Flush a whole word (branchlessly). */		\
+		put_unaligned_leword(bitbuf, out_next);			\
+		bitbuf >>= bitcount & ~7;				\
+		out_next += bitcount >> 3;				\
+		bitcount &= 7;						\
+	} else {							\
+		/* Flush a byte at a time. */				\
+		while (bitcount >= 8) {					\
+			ASSERT(out_next < os->end);			\
+			*out_next++ = bitbuf;				\
+			bitcount -= 8;					\
+			bitbuf >>= 8;					\
+		}							\
+	}								\
+} while (0)
+
+/*
+ * Given the binary tree node A[subtree_idx] whose children already satisfy the
+ * maxheap property, swap the node with its greater child until it is greater
+ * than or equal to both of its children, so that the maxheap property is
+ * satisfied in the subtree rooted at A[subtree_idx].  'A' uses 1-based indices.
+ */
+static void
+heapify_subtree(u32 A[], unsigned length, unsigned subtree_idx)
+{
+	unsigned parent_idx;
+	unsigned child_idx;
+	u32 v;
+
+	v = A[subtree_idx];
+	parent_idx = subtree_idx;
+	while ((child_idx = parent_idx * 2) <= length) {
+		if (child_idx < length && A[child_idx + 1] > A[child_idx])
+			child_idx++;
+		if (v >= A[child_idx])
+			break;
+		A[parent_idx] = A[child_idx];
+		parent_idx = child_idx;
+	}
+	A[parent_idx] = v;
+}
+
+/*
+ * Rearrange the array 'A' so that it satisfies the maxheap property.
+ * 'A' uses 1-based indices, so the children of A[i] are A[i*2] and A[i*2 + 1].
+ */
+static void
+heapify_array(u32 A[], unsigned length)
+{
+	unsigned subtree_idx;
+
+	for (subtree_idx = length / 2; subtree_idx >= 1; subtree_idx--)
+		heapify_subtree(A, length, subtree_idx);
+}
+
+/*
+ * Sort the array 'A', which contains 'length' unsigned 32-bit integers.
+ *
+ * Note: name this function heap_sort() instead of heapsort() to avoid colliding
+ * with heapsort() from stdlib.h on BSD-derived systems.
+ */
+static void
+heap_sort(u32 A[], unsigned length)
+{
+	A--; /* Use 1-based indices  */
+
+	heapify_array(A, length);
+
+	while (length >= 2) {
+		u32 tmp = A[length];
+
+		A[length] = A[1];
+		A[1] = tmp;
+		length--;
+		heapify_subtree(A, length, 1);
+	}
+}
+
+#define NUM_SYMBOL_BITS 10
+#define NUM_FREQ_BITS	(32 - NUM_SYMBOL_BITS)
+#define SYMBOL_MASK	((1 << NUM_SYMBOL_BITS) - 1)
+#define FREQ_MASK	(~SYMBOL_MASK)
+
+#define GET_NUM_COUNTERS(num_syms)	(num_syms)
+
+/*
+ * Sort the symbols primarily by frequency and secondarily by symbol value.
+ * Discard symbols with zero frequency and fill in an array with the remaining
+ * symbols, along with their frequencies.  The low NUM_SYMBOL_BITS bits of each
+ * array entry will contain the symbol value, and the remaining bits will
+ * contain the frequency.
+ *
+ * @num_syms
+ *	Number of symbols in the alphabet, at most 1 << NUM_SYMBOL_BITS.
+ *
+ * @freqs[num_syms]
+ *	Frequency of each symbol, summing to at most (1 << NUM_FREQ_BITS) - 1.
+ *
+ * @lens[num_syms]
+ *	An array that eventually will hold the length of each codeword.  This
+ *	function only fills in the codeword lengths for symbols that have zero
+ *	frequency, which are not well defined per se but will be set to 0.
+ *
+ * @symout[num_syms]
+ *	The output array, described above.
+ *
+ * Returns the number of entries in 'symout' that were filled.  This is the
+ * number of symbols that have nonzero frequency.
+ */
+static unsigned
+sort_symbols(unsigned num_syms, const u32 freqs[], u8 lens[], u32 symout[])
+{
+	unsigned sym;
+	unsigned i;
+	unsigned num_used_syms;
+	unsigned num_counters;
+	unsigned counters[GET_NUM_COUNTERS(DEFLATE_MAX_NUM_SYMS)];
+
+	/*
+	 * We use heapsort, but with an added optimization.  Since often most
+	 * symbol frequencies are low, we first do a count sort using a limited
+	 * number of counters.  High frequencies are counted in the last
+	 * counter, and only they will be sorted with heapsort.
+	 *
+	 * Note: with more symbols, it is generally beneficial to have more
+	 * counters.  About 1 counter per symbol seems fastest.
+	 */
+
+	num_counters = GET_NUM_COUNTERS(num_syms);
+
+	memset(counters, 0, num_counters * sizeof(counters[0]));
+
+	/* Count the frequencies. */
+	for (sym = 0; sym < num_syms; sym++)
+		counters[MIN(freqs[sym], num_counters - 1)]++;
+
+	/*
+	 * Make the counters cumulative, ignoring the zero-th, which counted
+	 * symbols with zero frequency.  As a side effect, this calculates the
+	 * number of symbols with nonzero frequency.
+	 */
+	num_used_syms = 0;
+	for (i = 1; i < num_counters; i++) {
+		unsigned count = counters[i];
+
+		counters[i] = num_used_syms;
+		num_used_syms += count;
+	}
+
+	/*
+	 * Sort nonzero-frequency symbols using the counters.  At the same time,
+	 * set the codeword lengths of zero-frequency symbols to 0.
+	 */
+	for (sym = 0; sym < num_syms; sym++) {
+		u32 freq = freqs[sym];
+
+		if (freq != 0) {
+			symout[counters[MIN(freq, num_counters - 1)]++] =
+				sym | (freq << NUM_SYMBOL_BITS);
+		} else {
+			lens[sym] = 0;
+		}
+	}
+
+	/* Sort the symbols counted in the last counter. */
+	heap_sort(symout + counters[num_counters - 2],
+		  counters[num_counters - 1] - counters[num_counters - 2]);
+
+	return num_used_syms;
+}
+
+/*
+ * Build a Huffman tree.
+ *
+ * This is an optimized implementation that
+ *	(a) takes advantage of the frequencies being already sorted;
+ *	(b) only generates non-leaf nodes, since the non-leaf nodes of a Huffman
+ *	    tree are sufficient to generate a canonical code;
+ *	(c) Only stores parent pointers, not child pointers;
+ *	(d) Produces the nodes in the same memory used for input frequency
+ *	    information.
+ *
+ * Array 'A', which contains 'sym_count' entries, is used for both input and
+ * output.  For this function, 'sym_count' must be at least 2.
+ *
+ * For input, the array must contain the frequencies of the symbols, sorted in
+ * increasing order.  Specifically, each entry must contain a frequency left
+ * shifted by NUM_SYMBOL_BITS bits.  Any data in the low NUM_SYMBOL_BITS bits of
+ * the entries will be ignored by this function.  Although these bits will, in
+ * fact, contain the symbols that correspond to the frequencies, this function
+ * is concerned with frequencies only and keeps the symbols as-is.
+ *
+ * For output, this function will produce the non-leaf nodes of the Huffman
+ * tree.  These nodes will be stored in the first (sym_count - 1) entries of the
+ * array.  Entry A[sym_count - 2] will represent the root node.  Each other node
+ * will contain the zero-based index of its parent node in 'A', left shifted by
+ * NUM_SYMBOL_BITS bits.  The low NUM_SYMBOL_BITS bits of each entry in A will
+ * be kept as-is.  Again, note that although these low bits will, in fact,
+ * contain a symbol value, this symbol will have *no relationship* with the
+ * Huffman tree node that happens to occupy the same slot.  This is because this
+ * implementation only generates the non-leaf nodes of the tree.
+ */
+static void
+build_tree(u32 A[], unsigned sym_count)
+{
+	const unsigned last_idx = sym_count - 1;
+
+	/* Index of the next lowest frequency leaf that still needs a parent */
+	unsigned i = 0;
+
+	/*
+	 * Index of the next lowest frequency non-leaf that still needs a
+	 * parent, or 'e' if there is currently no such node
+	 */
+	unsigned b = 0;
+
+	/* Index of the next spot for a non-leaf (will overwrite a leaf) */
+	unsigned e = 0;
+
+	do {
+		u32 new_freq;
+
+		/*
+		 * Select the next two lowest frequency nodes among the leaves
+		 * A[i] and non-leaves A[b], and create a new node A[e] to be
+		 * their parent.  Set the new node's frequency to the sum of the
+		 * frequencies of its two children.
+		 *
+		 * Usually the next two lowest frequency nodes are of the same
+		 * type (leaf or non-leaf), so check those cases first.
+		 */
+		if (i + 1 <= last_idx &&
+		    (b == e || (A[i + 1] & FREQ_MASK) <= (A[b] & FREQ_MASK))) {
+			/* Two leaves */
+			new_freq = (A[i] & FREQ_MASK) + (A[i + 1] & FREQ_MASK);
+			i += 2;
+		} else if (b + 2 <= e &&
+			   (i > last_idx ||
+			    (A[b + 1] & FREQ_MASK) < (A[i] & FREQ_MASK))) {
+			/* Two non-leaves */
+			new_freq = (A[b] & FREQ_MASK) + (A[b + 1] & FREQ_MASK);
+			A[b] = (e << NUM_SYMBOL_BITS) | (A[b] & SYMBOL_MASK);
+			A[b + 1] = (e << NUM_SYMBOL_BITS) |
+				   (A[b + 1] & SYMBOL_MASK);
+			b += 2;
+		} else {
+			/* One leaf and one non-leaf */
+			new_freq = (A[i] & FREQ_MASK) + (A[b] & FREQ_MASK);
+			A[b] = (e << NUM_SYMBOL_BITS) | (A[b] & SYMBOL_MASK);
+			i++;
+			b++;
+		}
+		A[e] = new_freq | (A[e] & SYMBOL_MASK);
+		/*
+		 * A binary tree with 'n' leaves has 'n - 1' non-leaves, so the
+		 * tree is complete once we've created 'n - 1' non-leaves.
+		 */
+	} while (++e < last_idx);
+}
+
+/*
+ * Given the stripped-down Huffman tree constructed by build_tree(), determine
+ * the number of codewords that should be assigned each possible length, taking
+ * into account the length-limited constraint.
+ *
+ * @A
+ *	The array produced by build_tree(), containing parent index information
+ *	for the non-leaf nodes of the Huffman tree.  Each entry in this array is
+ *	a node; a node's parent always has a greater index than that node
+ *	itself.  This function will overwrite the parent index information in
+ *	this array, so essentially it will destroy the tree.  However, the data
+ *	in the low NUM_SYMBOL_BITS of each entry will be preserved.
+ *
+ * @root_idx
+ *	The 0-based index of the root node in 'A', and consequently one less
+ *	than the number of tree node entries in 'A'.  (Or, really 2 less than
+ *	the actual length of 'A'.)
+ *
+ * @len_counts
+ *	An array of length ('max_codeword_len' + 1) in which the number of
+ *	codewords having each length <= max_codeword_len will be returned.
+ *
+ * @max_codeword_len
+ *	The maximum permissible codeword length.
+ */
+static void
+compute_length_counts(u32 A[], unsigned root_idx, unsigned len_counts[],
+		      unsigned max_codeword_len)
+{
+	unsigned len;
+	int node;
+
+	/*
+	 * The key observations are:
+	 *
+	 * (1) We can traverse the non-leaf nodes of the tree, always visiting a
+	 *     parent before its children, by simply iterating through the array
+	 *     in reverse order.  Consequently, we can compute the depth of each
+	 *     node in one pass, overwriting the parent indices with depths.
+	 *
+	 * (2) We can initially assume that in the real Huffman tree, both
+	 *     children of the root are leaves.  This corresponds to two
+	 *     codewords of length 1.  Then, whenever we visit a (non-leaf) node
+	 *     during the traversal, we modify this assumption to account for
+	 *     the current node *not* being a leaf, but rather its two children
+	 *     being leaves.  This causes the loss of one codeword for the
+	 *     current depth and the addition of two codewords for the current
+	 *     depth plus one.
+	 *
+	 * (3) We can handle the length-limited constraint fairly easily by
+	 *     simply using the largest length available when a depth exceeds
+	 *     max_codeword_len.
+	 */
+
+	for (len = 0; len <= max_codeword_len; len++)
+		len_counts[len] = 0;
+	len_counts[1] = 2;
+
+	/* Set the root node's depth to 0. */
+	A[root_idx] &= SYMBOL_MASK;
+
+	for (node = root_idx - 1; node >= 0; node--) {
+
+		/* Calculate the depth of this node. */
+
+		unsigned parent = A[node] >> NUM_SYMBOL_BITS;
+		unsigned parent_depth = A[parent] >> NUM_SYMBOL_BITS;
+		unsigned depth = parent_depth + 1;
+
+		/*
+		 * Set the depth of this node so that it is available when its
+		 * children (if any) are processed.
+		 */
+		A[node] = (A[node] & SYMBOL_MASK) | (depth << NUM_SYMBOL_BITS);
+
+		/*
+		 * If needed, decrease the length to meet the length-limited
+		 * constraint.  This is not the optimal method for generating
+		 * length-limited Huffman codes!  But it should be good enough.
+		 */
+		if (depth >= max_codeword_len) {
+			depth = max_codeword_len;
+			do {
+				depth--;
+			} while (len_counts[depth] == 0);
+		}
+
+		/*
+		 * Account for the fact that we have a non-leaf node at the
+		 * current depth.
+		 */
+		len_counts[depth]--;
+		len_counts[depth + 1] += 2;
+	}
+}
+
+/*
+ * DEFLATE uses bit-reversed codewords, so we must bit-reverse the codewords
+ * after generating them.  All codewords have length <= 16 bits.  If the CPU has
+ * a bit-reversal instruction, then that is the fastest method.  Otherwise the
+ * fastest method is to reverse the bits in each of the two bytes using a table.
+ * The table method is slightly faster than using bitwise operations to flip
+ * adjacent 1, 2, 4, and then 8-bit fields, even if 2 to 4 codewords are packed
+ * into a machine word and processed together using that method.
+ */
+
+#ifdef rbit32
+static forceinline u32 reverse_codeword(u32 codeword, u8 len)
+{
+	return rbit32(codeword) >> ((32 - len) & 31);
+}
+#else
+/* Generated by scripts/gen_bitreverse_tab.py */
+static const u8 bitreverse_tab[256] = {
+	0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
+	0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
+	0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
+	0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
+	0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
+	0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
+	0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
+	0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
+	0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
+	0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
+	0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
+	0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
+	0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
+	0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
+	0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
+	0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
+	0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
+	0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
+	0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
+	0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
+	0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
+	0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
+	0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
+	0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
+	0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
+	0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
+	0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
+	0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
+	0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
+	0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
+	0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
+	0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
+};
+
+static forceinline u32 reverse_codeword(u32 codeword, u8 len)
+{
+	STATIC_ASSERT(DEFLATE_MAX_CODEWORD_LEN <= 16);
+	codeword = ((u32)bitreverse_tab[codeword & 0xff] << 8) |
+		   bitreverse_tab[codeword >> 8];
+	return codeword >> (16 - len);
+}
+#endif /* !rbit32 */
+
+/*
+ * Generate the codewords for a canonical Huffman code.
+ *
+ * @A
+ *	The output array for codewords.  In addition, initially this
+ *	array must contain the symbols, sorted primarily by frequency and
+ *	secondarily by symbol value, in the low NUM_SYMBOL_BITS bits of
+ *	each entry.
+ *
+ * @len
+ *	Output array for codeword lengths.
+ *
+ * @len_counts
+ *	An array that provides the number of codewords that will have
+ *	each possible length <= max_codeword_len.
+ *
+ * @max_codeword_len
+ *	Maximum length, in bits, of each codeword.
+ *
+ * @num_syms
+ *	Number of symbols in the alphabet, including symbols with zero
+ *	frequency.  This is the length of the 'A' and 'len' arrays.
+ */
+static void
+gen_codewords(u32 A[], u8 lens[], const unsigned len_counts[],
+	      unsigned max_codeword_len, unsigned num_syms)
+{
+	u32 next_codewords[DEFLATE_MAX_CODEWORD_LEN + 1];
+	unsigned i;
+	unsigned len;
+	unsigned sym;
+
+	/*
+	 * Given the number of codewords that will have each length, assign
+	 * codeword lengths to symbols.  We do this by assigning the lengths in
+	 * decreasing order to the symbols sorted primarily by increasing
+	 * frequency and secondarily by increasing symbol value.
+	 */
+	for (i = 0, len = max_codeword_len; len >= 1; len--) {
+		unsigned count = len_counts[len];
+
+		while (count--)
+			lens[A[i++] & SYMBOL_MASK] = len;
+	}
+
+	/*
+	 * Generate the codewords themselves.  We initialize the
+	 * 'next_codewords' array to provide the lexicographically first
+	 * codeword of each length, then assign codewords in symbol order.  This
+	 * produces a canonical code.
+	 */
+	next_codewords[0] = 0;
+	next_codewords[1] = 0;
+	for (len = 2; len <= max_codeword_len; len++)
+		next_codewords[len] =
+			(next_codewords[len - 1] + len_counts[len - 1]) << 1;
+
+	for (sym = 0; sym < num_syms; sym++) {
+		/* DEFLATE requires bit-reversed codewords. */
+		A[sym] = reverse_codeword(next_codewords[lens[sym]]++,
+					  lens[sym]);
+	}
+}
+
+/*
+ * ---------------------------------------------------------------------
+ *			deflate_make_huffman_code()
+ * ---------------------------------------------------------------------
+ *
+ * Given an alphabet and the frequency of each symbol in it, construct a
+ * length-limited canonical Huffman code.
+ *
+ * @num_syms
+ *	The number of symbols in the alphabet.  The symbols are the integers in
+ *	the range [0, num_syms - 1].  This parameter must be at least 2 and
+ *	must not exceed (1 << NUM_SYMBOL_BITS).
+ *
+ * @max_codeword_len
+ *	The maximum permissible codeword length.
+ *
+ * @freqs
+ *	An array of length @num_syms that gives the frequency of each symbol.
+ *	It is valid for some, none, or all of the frequencies to be 0.  The sum
+ *	of frequencies must not exceed (1 << NUM_FREQ_BITS) - 1.
+ *
+ * @lens
+ *	An array of @num_syms entries in which this function will return the
+ *	length, in bits, of the codeword assigned to each symbol.  Symbols with
+ *	0 frequency will not have codewords per se, but their entries in this
+ *	array will be set to 0.  No lengths greater than @max_codeword_len will
+ *	be assigned.
+ *
+ * @codewords
+ *	An array of @num_syms entries in which this function will return the
+ *	codeword for each symbol, right-justified and padded on the left with
+ *	zeroes.  Codewords for symbols with 0 frequency will be undefined.
+ *
+ * ---------------------------------------------------------------------
+ *
+ * This function builds a length-limited canonical Huffman code.
+ *
+ * A length-limited Huffman code contains no codewords longer than some
+ * specified length, and has exactly (with some algorithms) or approximately
+ * (with the algorithm used here) the minimum weighted path length from the
+ * root, given this constraint.
+ *
+ * A canonical Huffman code satisfies the properties that a longer codeword
+ * never lexicographically precedes a shorter codeword, and the lexicographic
+ * ordering of codewords of the same length is the same as the lexicographic
+ * ordering of the corresponding symbols.  A canonical Huffman code, or more
+ * generally a canonical prefix code, can be reconstructed from only a list
+ * containing the codeword length of each symbol.
+ *
+ * The classic algorithm to generate a Huffman code creates a node for each
+ * symbol, then inserts these nodes into a min-heap keyed by symbol frequency.
+ * Then, repeatedly, the two lowest-frequency nodes are removed from the
+ * min-heap and added as the children of a new node having frequency equal to
+ * the sum of its two children, which is then inserted into the min-heap.  When
+ * only a single node remains in the min-heap, it is the root of the Huffman
+ * tree.  The codeword for each symbol is determined by the path needed to reach
+ * the corresponding node from the root.  Descending to the left child appends a
+ * 0 bit, whereas descending to the right child appends a 1 bit.
+ *
+ * The classic algorithm is relatively easy to understand, but it is subject to
+ * a number of inefficiencies.  In practice, it is fastest to first sort the
+ * symbols by frequency.  (This itself can be subject to an optimization based
+ * on the fact that most frequencies tend to be low.)  At the same time, we sort
+ * secondarily by symbol value, which aids the process of generating a canonical
+ * code.  Then, during tree construction, no heap is necessary because both the
+ * leaf nodes and the unparented non-leaf nodes can be easily maintained in
+ * sorted order.  Consequently, there can never be more than two possibilities
+ * for the next-lowest-frequency node.
+ *
+ * In addition, because we're generating a canonical code, we actually don't
+ * need the leaf nodes of the tree at all, only the non-leaf nodes.  This is
+ * because for canonical code generation we don't need to know where the symbols
+ * are in the tree.  Rather, we only need to know how many leaf nodes have each
+ * depth (codeword length).  And this information can, in fact, be quickly
+ * generated from the tree of non-leaves only.
+ *
+ * Furthermore, we can build this stripped-down Huffman tree directly in the
+ * array in which the codewords are to be generated, provided that these array
+ * slots are large enough to hold a symbol and frequency value.
+ *
+ * Still furthermore, we don't even need to maintain explicit child pointers.
+ * We only need the parent pointers, and even those can be overwritten in-place
+ * with depth information as part of the process of extracting codeword lengths
+ * from the tree.  So in summary, we do NOT need a big structure like:
+ *
+ *	struct huffman_tree_node {
+ *		unsigned int symbol;
+ *		unsigned int frequency;
+ *		unsigned int depth;
+ *		struct huffman_tree_node *left_child;
+ *		struct huffman_tree_node *right_child;
+ *	};
+ *
+ *
+ * ... which often gets used in "naive" implementations of Huffman code
+ * generation.
+ *
+ * Many of these optimizations are based on the implementation in 7-Zip (source
+ * file: C/HuffEnc.c), which was placed in the public domain by Igor Pavlov.
+ */
+static void
+deflate_make_huffman_code(unsigned num_syms, unsigned max_codeword_len,
+			  const u32 freqs[], u8 lens[], u32 codewords[])
+{
+	u32 *A = codewords;
+	unsigned num_used_syms;
+
+	STATIC_ASSERT(DEFLATE_MAX_NUM_SYMS <= 1 << NUM_SYMBOL_BITS);
+	STATIC_ASSERT(MAX_BLOCK_LENGTH <= ((u32)1 << NUM_FREQ_BITS) - 1);
+
+	/*
+	 * We begin by sorting the symbols primarily by frequency and
+	 * secondarily by symbol value.  As an optimization, the array used for
+	 * this purpose ('A') shares storage with the space in which we will
+	 * eventually return the codewords.
+	 */
+	num_used_syms = sort_symbols(num_syms, freqs, lens, A);
+	/*
+	 * 'num_used_syms' is the number of symbols with nonzero frequency.
+	 * This may be less than @num_syms.  'num_used_syms' is also the number
+	 * of entries in 'A' that are valid.  Each entry consists of a distinct
+	 * symbol and a nonzero frequency packed into a 32-bit integer.
+	 */
+
+	/*
+	 * A complete Huffman code must contain at least 2 codewords.  Yet, it's
+	 * possible that fewer than 2 symbols were used.  When this happens,
+	 * it's usually for the offset code (0-1 symbols used).  But it's also
+	 * theoretically possible for the litlen and pre codes (1 symbol used).
+	 *
+	 * The DEFLATE RFC explicitly allows the offset code to contain just 1
+	 * codeword, or even be completely empty.  But it's silent about the
+	 * other codes.  It also doesn't say whether, in the 1-codeword case,
+	 * the codeword (which it says must be 1 bit) is '0' or '1'.
+	 *
+	 * In any case, some DEFLATE decompressors reject these cases.  zlib
+	 * generally allows them, but it does reject precodes that have just 1
+	 * codeword.  More problematically, zlib v1.2.1 and earlier rejected
+	 * empty offset codes, and this behavior can also be seen in Windows
+	 * Explorer's ZIP unpacker (supposedly even still in Windows 11).
+	 *
+	 * Other DEFLATE compressors, including zlib, always send at least 2
+	 * codewords in order to make a complete Huffman code.  Therefore, this
+	 * is a case where practice does not entirely match the specification.
+	 * We follow practice by generating 2 codewords of length 1: codeword
+	 * '0' for symbol 0, and codeword '1' for another symbol -- the used
+	 * symbol if it exists and is not symbol 0, otherwise symbol 1.  This
+	 * does worsen the compression ratio by having to send an unnecessary
+	 * offset codeword length.  But this only affects rare cases such as
+	 * blocks containing all literals, and it only makes a tiny difference.
+	 */
+	if (unlikely(num_used_syms < 2)) {
+		unsigned sym = num_used_syms ? (A[0] & SYMBOL_MASK) : 0;
+		unsigned nonzero_idx = sym ? sym : 1;
+
+		codewords[0] = 0;
+		lens[0] = 1;
+		codewords[nonzero_idx] = 1;
+		lens[nonzero_idx] = 1;
+		return;
+	}
+
+	/*
+	 * Build a stripped-down version of the Huffman tree, sharing the array
+	 * 'A' with the symbol values.  Then extract length counts from the tree
+	 * and use them to generate the final codewords.
+	 */
+
+	build_tree(A, num_used_syms);
+
+	{
+		unsigned len_counts[DEFLATE_MAX_CODEWORD_LEN + 1];
+
+		compute_length_counts(A, num_used_syms - 2,
+				      len_counts, max_codeword_len);
+
+		gen_codewords(A, lens, len_counts, max_codeword_len, num_syms);
+	}
+}
+
+/*
+ * Clear the Huffman symbol frequency counters.  This must be called when
+ * starting a new DEFLATE block.
+ */
+static void
+deflate_reset_symbol_frequencies(struct libdeflate_compressor *c)
+{
+	memset(&c->freqs, 0, sizeof(c->freqs));
+}
+
+/*
+ * Build the literal/length and offset Huffman codes for a DEFLATE block.
+ *
+ * This takes as input the frequency tables for each alphabet and produces as
+ * output a set of tables that map symbols to codewords and codeword lengths.
+ */
+static void
+deflate_make_huffman_codes(const struct deflate_freqs *freqs,
+			   struct deflate_codes *codes)
+{
+	deflate_make_huffman_code(DEFLATE_NUM_LITLEN_SYMS,
+				  MAX_LITLEN_CODEWORD_LEN,
+				  freqs->litlen,
+				  codes->lens.litlen,
+				  codes->codewords.litlen);
+
+	deflate_make_huffman_code(DEFLATE_NUM_OFFSET_SYMS,
+				  MAX_OFFSET_CODEWORD_LEN,
+				  freqs->offset,
+				  codes->lens.offset,
+				  codes->codewords.offset);
+}
+
+/* Initialize c->static_codes. */
+static void
+deflate_init_static_codes(struct libdeflate_compressor *c)
+{
+	unsigned i;
+
+	for (i = 0; i < 144; i++)
+		c->freqs.litlen[i] = 1 << (9 - 8);
+	for (; i < 256; i++)
+		c->freqs.litlen[i] = 1 << (9 - 9);
+	for (; i < 280; i++)
+		c->freqs.litlen[i] = 1 << (9 - 7);
+	for (; i < 288; i++)
+		c->freqs.litlen[i] = 1 << (9 - 8);
+
+	for (i = 0; i < 32; i++)
+		c->freqs.offset[i] = 1 << (5 - 5);
+
+	deflate_make_huffman_codes(&c->freqs, &c->static_codes);
+}
+
+/* Return the offset slot for the given match offset, using the small map. */
+static forceinline unsigned
+deflate_get_offset_slot(u32 offset)
+{
+	/*
+	 * 1 <= offset <= 32768 here.  For 1 <= offset <= 256,
+	 * deflate_offset_slot[offset - 1] gives the slot.
+	 *
+	 * For 257 <= offset <= 32768, we take advantage of the fact that 257 is
+	 * the beginning of slot 16, and each slot [16..30) is exactly 1 << 7 ==
+	 * 128 times larger than each slot [2..16) (since the number of extra
+	 * bits increases by 1 every 2 slots).  Thus, the slot is:
+	 *
+	 *	deflate_offset_slot[2 + ((offset - 257) >> 7)] + (16 - 2)
+	 *   == deflate_offset_slot[((offset - 1) >> 7)] + 14
+	 *
+	 * Define 'n = (offset <= 256) ? 0 : 7'.  Then any offset is handled by:
+	 *
+	 *      deflate_offset_slot[(offset - 1) >> n] + (n << 1)
+	 *
+	 * For better performance, replace 'n = (offset <= 256) ? 0 : 7' with
+	 * the equivalent (for offset <= 536871168) 'n = (256 - offset) >> 29'.
+	 */
+	unsigned n = (256 - offset) >> 29;
+
+	ASSERT(offset >= 1 && offset <= 32768);
+
+	return deflate_offset_slot[(offset - 1) >> n] + (n << 1);
+}
+
+static unsigned
+deflate_compute_precode_items(const u8 lens[], const unsigned num_lens,
+			      u32 precode_freqs[], unsigned precode_items[])
+{
+	unsigned *itemptr;
+	unsigned run_start;
+	unsigned run_end;
+	unsigned extra_bits;
+	u8 len;
+
+	memset(precode_freqs, 0,
+	       DEFLATE_NUM_PRECODE_SYMS * sizeof(precode_freqs[0]));
+
+	itemptr = precode_items;
+	run_start = 0;
+	do {
+		/* Find the next run of codeword lengths. */
+
+		/* len = the length being repeated */
+		len = lens[run_start];
+
+		/* Extend the run. */
+		run_end = run_start;
+		do {
+			run_end++;
+		} while (run_end != num_lens && len == lens[run_end]);
+
+		if (len == 0) {
+			/* Run of zeroes. */
+
+			/* Symbol 18: RLE 11 to 138 zeroes at a time. */
+			while ((run_end - run_start) >= 11) {
+				extra_bits = MIN((run_end - run_start) - 11,
+						 0x7F);
+				precode_freqs[18]++;
+				*itemptr++ = 18 | (extra_bits << 5);
+				run_start += 11 + extra_bits;
+			}
+
+			/* Symbol 17: RLE 3 to 10 zeroes at a time. */
+			if ((run_end - run_start) >= 3) {
+				extra_bits = MIN((run_end - run_start) - 3,
+						 0x7);
+				precode_freqs[17]++;
+				*itemptr++ = 17 | (extra_bits << 5);
+				run_start += 3 + extra_bits;
+			}
+		} else {
+
+			/* A run of nonzero lengths. */
+
+			/* Symbol 16: RLE 3 to 6 of the previous length. */
+			if ((run_end - run_start) >= 4) {
+				precode_freqs[len]++;
+				*itemptr++ = len;
+				run_start++;
+				do {
+					extra_bits = MIN((run_end - run_start) -
+							 3, 0x3);
+					precode_freqs[16]++;
+					*itemptr++ = 16 | (extra_bits << 5);
+					run_start += 3 + extra_bits;
+				} while ((run_end - run_start) >= 3);
+			}
+		}
+
+		/* Output any remaining lengths without RLE. */
+		while (run_start != run_end) {
+			precode_freqs[len]++;
+			*itemptr++ = len;
+			run_start++;
+		}
+	} while (run_start != num_lens);
+
+	return itemptr - precode_items;
+}
+
+/*
+ * Huffman codeword lengths for dynamic Huffman blocks are compressed using a
+ * separate Huffman code, the "precode", which contains a symbol for each
+ * possible codeword length in the larger code as well as several special
+ * symbols to represent repeated codeword lengths (a form of run-length
+ * encoding).  The precode is itself constructed in canonical form, and its
+ * codeword lengths are represented literally in 19 3-bit fields that
+ * immediately precede the compressed codeword lengths of the larger code.
+ */
+
+/* Precompute the information needed to output dynamic Huffman codes. */
+static void
+deflate_precompute_huffman_header(struct libdeflate_compressor *c)
+{
+	/* Compute how many litlen and offset symbols are needed. */
+
+	for (c->o.precode.num_litlen_syms = DEFLATE_NUM_LITLEN_SYMS;
+	     c->o.precode.num_litlen_syms > 257;
+	     c->o.precode.num_litlen_syms--)
+		if (c->codes.lens.litlen[c->o.precode.num_litlen_syms - 1] != 0)
+			break;
+
+	for (c->o.precode.num_offset_syms = DEFLATE_NUM_OFFSET_SYMS;
+	     c->o.precode.num_offset_syms > 1;
+	     c->o.precode.num_offset_syms--)
+		if (c->codes.lens.offset[c->o.precode.num_offset_syms - 1] != 0)
+			break;
+
+	/*
+	 * If we're not using the full set of literal/length codeword lengths,
+	 * then temporarily move the offset codeword lengths over so that the
+	 * literal/length and offset codeword lengths are contiguous.
+	 */
+	STATIC_ASSERT(offsetof(struct deflate_lens, offset) ==
+		      DEFLATE_NUM_LITLEN_SYMS);
+	if (c->o.precode.num_litlen_syms != DEFLATE_NUM_LITLEN_SYMS) {
+		memmove((u8 *)&c->codes.lens + c->o.precode.num_litlen_syms,
+			(u8 *)&c->codes.lens + DEFLATE_NUM_LITLEN_SYMS,
+			c->o.precode.num_offset_syms);
+	}
+
+	/*
+	 * Compute the "items" (RLE / literal tokens and extra bits) with which
+	 * the codeword lengths in the larger code will be output.
+	 */
+	c->o.precode.num_items =
+		deflate_compute_precode_items((u8 *)&c->codes.lens,
+					      c->o.precode.num_litlen_syms +
+					      c->o.precode.num_offset_syms,
+					      c->o.precode.freqs,
+					      c->o.precode.items);
+
+	/* Build the precode. */
+	deflate_make_huffman_code(DEFLATE_NUM_PRECODE_SYMS,
+				  MAX_PRE_CODEWORD_LEN,
+				  c->o.precode.freqs, c->o.precode.lens,
+				  c->o.precode.codewords);
+
+	/* Count how many precode lengths we actually need to output. */
+	for (c->o.precode.num_explicit_lens = DEFLATE_NUM_PRECODE_SYMS;
+	     c->o.precode.num_explicit_lens > 4;
+	     c->o.precode.num_explicit_lens--)
+		if (c->o.precode.lens[deflate_precode_lens_permutation[
+				c->o.precode.num_explicit_lens - 1]] != 0)
+			break;
+
+	/* Restore the offset codeword lengths if needed. */
+	if (c->o.precode.num_litlen_syms != DEFLATE_NUM_LITLEN_SYMS) {
+		memmove((u8 *)&c->codes.lens + DEFLATE_NUM_LITLEN_SYMS,
+			(u8 *)&c->codes.lens + c->o.precode.num_litlen_syms,
+			c->o.precode.num_offset_syms);
+	}
+}
+
+/*
+ * To make it faster to output matches, compute the "full" match length
+ * codewords, i.e. the concatenation of the litlen codeword and the extra bits
+ * for each possible match length.
+ */
+static void
+deflate_compute_full_len_codewords(struct libdeflate_compressor *c,
+				   const struct deflate_codes *codes)
+{
+	unsigned len;
+
+	STATIC_ASSERT(MAX_LITLEN_CODEWORD_LEN +
+		      DEFLATE_MAX_EXTRA_LENGTH_BITS <= 32);
+
+	for (len = DEFLATE_MIN_MATCH_LEN; len <= DEFLATE_MAX_MATCH_LEN; len++) {
+		unsigned slot = deflate_length_slot[len];
+		unsigned litlen_sym = DEFLATE_FIRST_LEN_SYM + slot;
+		u32 extra_bits = len - deflate_length_slot_base[slot];
+
+		c->o.length.codewords[len] =
+			codes->codewords.litlen[litlen_sym] |
+			(extra_bits << codes->lens.litlen[litlen_sym]);
+		c->o.length.lens[len] = codes->lens.litlen[litlen_sym] +
+					deflate_extra_length_bits[slot];
+	}
+}
+
+/* Write a match to the output buffer. */
+#define WRITE_MATCH(c_, codes_, length_, offset_, offset_slot_)		\
+do {									\
+	const struct libdeflate_compressor *c__ = (c_);			\
+	const struct deflate_codes *codes__ = (codes_);			\
+	unsigned length__ = (length_);					\
+	unsigned offset__ = (offset_);					\
+	unsigned offset_slot__ = (offset_slot_);			\
+									\
+	/* Litlen symbol and extra length bits */			\
+	STATIC_ASSERT(CAN_BUFFER(MAX_LITLEN_CODEWORD_LEN +		\
+				 DEFLATE_MAX_EXTRA_LENGTH_BITS));	\
+	ADD_BITS(c__->o.length.codewords[length__],			\
+		 c__->o.length.lens[length__]);				\
+									\
+	if (!CAN_BUFFER(MAX_LITLEN_CODEWORD_LEN +			\
+			DEFLATE_MAX_EXTRA_LENGTH_BITS +			\
+			MAX_OFFSET_CODEWORD_LEN +			\
+			DEFLATE_MAX_EXTRA_OFFSET_BITS))			\
+		FLUSH_BITS();						\
+									\
+	/* Offset symbol */						\
+	ADD_BITS(codes__->codewords.offset[offset_slot__],		\
+		 codes__->lens.offset[offset_slot__]);			\
+									\
+	if (!CAN_BUFFER(MAX_OFFSET_CODEWORD_LEN +			\
+			DEFLATE_MAX_EXTRA_OFFSET_BITS))			\
+		FLUSH_BITS();						\
+									\
+	/* Extra offset bits */						\
+	ADD_BITS(offset__ - deflate_offset_slot_base[offset_slot__],	\
+		 deflate_extra_offset_bits[offset_slot__]);		\
+									\
+	FLUSH_BITS();							\
+} while (0)
+
+/*
+ * Choose the best type of block to use (dynamic Huffman, static Huffman, or
+ * uncompressed), then output it.
+ *
+ * The uncompressed data of the block is @block_begin[0..@block_length-1].  The
+ * sequence of literals and matches that will be used to compress the block (if
+ * a compressed block is chosen) is given by @sequences if it's non-NULL, or
+ * else @c->p.n.optimum_nodes.  @c->freqs and @c->codes must be already set
+ * according to the literals, matches, and end-of-block symbol.
+ */
+static void
+deflate_flush_block(struct libdeflate_compressor *c,
+		    struct deflate_output_bitstream *os,
+		    const u8 *block_begin, u32 block_length,
+		    const struct deflate_sequence *sequences,
+		    bool is_final_block)
+{
+	/*
+	 * It is hard to get compilers to understand that writes to 'os->next'
+	 * don't alias 'os'.  That hurts performance significantly, as
+	 * everything in 'os' would keep getting re-loaded.  ('restrict'
+	 * *should* do the trick, but it's unreliable.)  Therefore, we keep all
+	 * the output bitstream state in local variables, and output bits using
+	 * macros.  This is similar to what the decompressor does.
+	 */
+	const u8 *in_next = block_begin;
+	const u8 * const in_end = block_begin + block_length;
+	bitbuf_t bitbuf = os->bitbuf;
+	unsigned bitcount = os->bitcount;
+	u8 *out_next = os->next;
+	u8 * const out_fast_end =
+		os->end - MIN(WORDBYTES - 1, os->end - out_next);
+	/*
+	 * The cost for each block type, in bits.  Start with the cost of the
+	 * block header which is 3 bits.
+	 */
+	u32 dynamic_cost = 3;
+	u32 static_cost = 3;
+	u32 uncompressed_cost = 3;
+	u32 best_cost;
+	struct deflate_codes *codes;
+	unsigned sym;
+
+	ASSERT(block_length >= MIN_BLOCK_LENGTH ||
+	       (is_final_block && block_length > 0));
+    is_final_block=is_final_block&&c->in_is_final_block;
+    
+	ASSERT(block_length <= MAX_BLOCK_LENGTH);
+	ASSERT(bitcount <= 7);
+	ASSERT((bitbuf & ~(((bitbuf_t)1 << bitcount) - 1)) == 0);
+	ASSERT(out_next <= os->end);
+	ASSERT(!os->overflow);
+
+	/* Precompute the precode items and build the precode. */
+	deflate_precompute_huffman_header(c);
+
+	/* Account for the cost of encoding dynamic Huffman codes. */
+	dynamic_cost += 5 + 5 + 4 + (3 * c->o.precode.num_explicit_lens);
+	for (sym = 0; sym < DEFLATE_NUM_PRECODE_SYMS; sym++) {
+		u32 extra = deflate_extra_precode_bits[sym];
+
+		dynamic_cost += c->o.precode.freqs[sym] *
+				(extra + c->o.precode.lens[sym]);
+	}
+
+	/* Account for the cost of encoding literals. */
+	for (sym = 0; sym < 144; sym++) {
+		dynamic_cost += c->freqs.litlen[sym] *
+				c->codes.lens.litlen[sym];
+		static_cost += c->freqs.litlen[sym] * 8;
+	}
+	for (; sym < 256; sym++) {
+		dynamic_cost += c->freqs.litlen[sym] *
+				c->codes.lens.litlen[sym];
+		static_cost += c->freqs.litlen[sym] * 9;
+	}
+
+	/* Account for the cost of encoding the end-of-block symbol. */
+	dynamic_cost += c->codes.lens.litlen[DEFLATE_END_OF_BLOCK];
+	static_cost += 7;
+
+	/* Account for the cost of encoding lengths. */
+	for (sym = DEFLATE_FIRST_LEN_SYM;
+	     sym < DEFLATE_FIRST_LEN_SYM + ARRAY_LEN(deflate_extra_length_bits);
+	     sym++) {
+		u32 extra = deflate_extra_length_bits[
+					sym - DEFLATE_FIRST_LEN_SYM];
+
+		dynamic_cost += c->freqs.litlen[sym] *
+				(extra + c->codes.lens.litlen[sym]);
+		static_cost += c->freqs.litlen[sym] *
+				(extra + c->static_codes.lens.litlen[sym]);
+	}
+
+	/* Account for the cost of encoding offsets. */
+	for (sym = 0; sym < ARRAY_LEN(deflate_extra_offset_bits); sym++) {
+		u32 extra = deflate_extra_offset_bits[sym];
+
+		dynamic_cost += c->freqs.offset[sym] *
+				(extra + c->codes.lens.offset[sym]);
+		static_cost += c->freqs.offset[sym] * (extra + 5);
+	}
+
+	/* Compute the cost of using uncompressed blocks. */
+	uncompressed_cost += (-(bitcount + 3) & 7) + 32 +
+			     (40 * (DIV_ROUND_UP(block_length,
+						 UINT16_MAX) - 1)) +
+			     (8 * block_length);
+
+	/*
+	 * Choose and output the cheapest type of block.  If there is a tie,
+	 * prefer uncompressed, then static, then dynamic.
+	 */
+
+	best_cost = MIN(dynamic_cost, MIN(static_cost, uncompressed_cost));
+
+	/* If the block isn't going to fit, then stop early. */
+	if (DIV_ROUND_UP(bitcount + best_cost, 8) > os->end - out_next) {
+		os->overflow = true;
+		return;
+	}
+	/*
+	 * Else, now we know that the block fits, so no further bounds checks on
+	 * the output buffer are required until the next block.
+	 */
+
+	if (best_cost == uncompressed_cost) {
+		/*
+		 * Uncompressed block(s).  DEFLATE limits the length of
+		 * uncompressed blocks to UINT16_MAX bytes, so if the length of
+		 * the "block" we're flushing is over UINT16_MAX, we actually
+		 * output multiple blocks.
+		 */
+		do {
+			u8 bfinal = 0;
+			size_t len = UINT16_MAX;
+
+			if (in_end - in_next <= UINT16_MAX) {
+				bfinal = is_final_block;
+				len = in_end - in_next;
+			}
+			/* It was already checked that there is enough space. */
+			ASSERT(os->end - out_next >=
+			       DIV_ROUND_UP(bitcount + 3, 8) + 4 + len);
+			/*
+			 * Output BFINAL (1 bit) and BTYPE (2 bits), then align
+			 * to a byte boundary.
+			 */
+			STATIC_ASSERT(DEFLATE_BLOCKTYPE_UNCOMPRESSED == 0);
+			*out_next++ = (bfinal << bitcount) | bitbuf;
+			if (bitcount > 5)
+				*out_next++ = 0;
+			bitbuf = 0;
+			bitcount = 0;
+			/* Output LEN and NLEN, then the data itself. */
+			put_unaligned_le16(len, out_next);
+			out_next += 2;
+			put_unaligned_le16(~len, out_next);
+			out_next += 2;
+			memcpy(out_next, in_next, len);
+			out_next += len;
+			in_next += len;
+		} while (in_next != in_end);
+		/* Done outputting uncompressed block(s) */
+		goto out;
+	}
+
+	if (best_cost == static_cost) {
+		/* Static Huffman block */
+		codes = &c->static_codes;
+		ADD_BITS(is_final_block, 1);
+		ADD_BITS(DEFLATE_BLOCKTYPE_STATIC_HUFFMAN, 2);
+		FLUSH_BITS();
+	} else {
+		const unsigned num_explicit_lens = c->o.precode.num_explicit_lens;
+		const unsigned num_precode_items = c->o.precode.num_items;
+		unsigned precode_sym, precode_item;
+		unsigned i;
+
+		/* Dynamic Huffman block */
+
+		codes = &c->codes;
+		STATIC_ASSERT(CAN_BUFFER(1 + 2 + 5 + 5 + 4 + 3));
+		ADD_BITS(is_final_block, 1);
+		ADD_BITS(DEFLATE_BLOCKTYPE_DYNAMIC_HUFFMAN, 2);
+		ADD_BITS(c->o.precode.num_litlen_syms - 257, 5);
+		ADD_BITS(c->o.precode.num_offset_syms - 1, 5);
+		ADD_BITS(num_explicit_lens - 4, 4);
+
+		/* Output the lengths of the codewords in the precode. */
+		if (CAN_BUFFER(3 * (DEFLATE_NUM_PRECODE_SYMS - 1))) {
+			/*
+			 * A 64-bit bitbuffer is just one bit too small to hold
+			 * the maximum number of precode lens, so to minimize
+			 * flushes we merge one len with the previous fields.
+			 */
+			precode_sym = deflate_precode_lens_permutation[0];
+			ADD_BITS(c->o.precode.lens[precode_sym], 3);
+			FLUSH_BITS();
+			i = 1; /* num_explicit_lens >= 4 */
+			do {
+				precode_sym =
+					deflate_precode_lens_permutation[i];
+				ADD_BITS(c->o.precode.lens[precode_sym], 3);
+			} while (++i < num_explicit_lens);
+			FLUSH_BITS();
+		} else {
+			FLUSH_BITS();
+			i = 0;
+			do {
+				precode_sym =
+					deflate_precode_lens_permutation[i];
+				ADD_BITS(c->o.precode.lens[precode_sym], 3);
+				FLUSH_BITS();
+			} while (++i < num_explicit_lens);
+		}
+
+		/*
+		 * Output the lengths of the codewords in the litlen and offset
+		 * codes, encoded by the precode.
+		 */
+		i = 0;
+		do {
+			precode_item = c->o.precode.items[i];
+			precode_sym = precode_item & 0x1F;
+			STATIC_ASSERT(CAN_BUFFER(MAX_PRE_CODEWORD_LEN + 7));
+			ADD_BITS(c->o.precode.codewords[precode_sym],
+				 c->o.precode.lens[precode_sym]);
+			ADD_BITS(precode_item >> 5,
+				 deflate_extra_precode_bits[precode_sym]);
+			FLUSH_BITS();
+		} while (++i < num_precode_items);
+	}
+
+	/* Output the literals and matches for a dynamic or static block. */
+	ASSERT(bitcount <= 7);
+	deflate_compute_full_len_codewords(c, codes);
+#if SUPPORT_NEAR_OPTIMAL_PARSING
+	if (sequences == NULL) {
+		/* Output the literals and matches from the minimum-cost path */
+		struct deflate_optimum_node *cur_node =
+			&c->p.n.optimum_nodes[0];
+		struct deflate_optimum_node * const end_node =
+			&c->p.n.optimum_nodes[block_length];
+		do {
+			unsigned length = cur_node->item & OPTIMUM_LEN_MASK;
+			unsigned offset = cur_node->item >>
+					  OPTIMUM_OFFSET_SHIFT;
+			if (length == 1) {
+				/* Literal */
+				ADD_BITS(codes->codewords.litlen[offset],
+					 codes->lens.litlen[offset]);
+				FLUSH_BITS();
+			} else {
+				/* Match */
+				WRITE_MATCH(c, codes, length, offset,
+					    c->p.n.offset_slot_full[offset]);
+			}
+			cur_node += length;
+		} while (cur_node != end_node);
+	} else
+#endif /* SUPPORT_NEAR_OPTIMAL_PARSING */
+	{
+		/* Output the literals and matches from the sequences list. */
+		const struct deflate_sequence *seq;
+
+		for (seq = sequences; ; seq++) {
+			u32 litrunlen = seq->litrunlen_and_length &
+					SEQ_LITRUNLEN_MASK;
+			unsigned length = seq->litrunlen_and_length >>
+					  SEQ_LENGTH_SHIFT;
+			unsigned lit;
+
+			/* Output a run of literals. */
+			if (CAN_BUFFER(4 * MAX_LITLEN_CODEWORD_LEN)) {
+				for (; litrunlen >= 4; litrunlen -= 4) {
+					lit = *in_next++;
+					ADD_BITS(codes->codewords.litlen[lit],
+						 codes->lens.litlen[lit]);
+					lit = *in_next++;
+					ADD_BITS(codes->codewords.litlen[lit],
+						 codes->lens.litlen[lit]);
+					lit = *in_next++;
+					ADD_BITS(codes->codewords.litlen[lit],
+						 codes->lens.litlen[lit]);
+					lit = *in_next++;
+					ADD_BITS(codes->codewords.litlen[lit],
+						 codes->lens.litlen[lit]);
+					FLUSH_BITS();
+				}
+				if (litrunlen-- != 0) {
+					lit = *in_next++;
+					ADD_BITS(codes->codewords.litlen[lit],
+						 codes->lens.litlen[lit]);
+					if (litrunlen-- != 0) {
+						lit = *in_next++;
+						ADD_BITS(codes->codewords.litlen[lit],
+							 codes->lens.litlen[lit]);
+						if (litrunlen-- != 0) {
+							lit = *in_next++;
+							ADD_BITS(codes->codewords.litlen[lit],
+								 codes->lens.litlen[lit]);
+						}
+					}
+					FLUSH_BITS();
+				}
+			} else {
+				while (litrunlen--) {
+					lit = *in_next++;
+					ADD_BITS(codes->codewords.litlen[lit],
+						 codes->lens.litlen[lit]);
+					FLUSH_BITS();
+				}
+			}
+
+			if (length == 0) { /* Last sequence? */
+				ASSERT(in_next == in_end);
+				break;
+			}
+
+			/* Output a match. */
+			WRITE_MATCH(c, codes, length, seq->offset,
+				    seq->offset_slot);
+			in_next += length;
+		}
+	}
+
+	/* Output the end-of-block symbol. */
+	ASSERT(bitcount <= 7);
+	ADD_BITS(codes->codewords.litlen[DEFLATE_END_OF_BLOCK],
+		 codes->lens.litlen[DEFLATE_END_OF_BLOCK]);
+	FLUSH_BITS();
+out:
+	ASSERT(bitcount <= 7);
+	/*
+	 * Assert that the block cost was computed correctly.  This is relied on
+	 * above for the bounds check on the output buffer.  Also,
+	 * libdeflate_deflate_compress_bound() relies on this via the assumption
+	 * that uncompressed blocks will always be used when cheapest.
+	 */
+	ASSERT(8 * (out_next - os->next) + bitcount - os->bitcount == best_cost);
+	os->bitbuf = bitbuf;
+	os->bitcount = bitcount;
+	os->next = out_next;
+}
+
+static forceinline void
+deflate_finish_block(struct libdeflate_compressor *c,
+		     struct deflate_output_bitstream *os,
+		     const u8 *block_begin, u32 block_length,
+		     const struct deflate_sequence *sequences,
+		     bool is_final_block)
+{
+	c->freqs.litlen[DEFLATE_END_OF_BLOCK]++;
+	deflate_make_huffman_codes(&c->freqs, &c->codes);
+	deflate_flush_block(c, os, block_begin, block_length, sequences,
+			    is_final_block);
+}
+
+/******************************************************************************/
+
+/*
+ * Block splitting algorithm.  The problem is to decide when it is worthwhile to
+ * start a new block with new Huffman codes.  There is a theoretically optimal
+ * solution: recursively consider every possible block split, considering the
+ * exact cost of each block, and choose the minimum cost approach.  But this is
+ * far too slow.  Instead, as an approximation, we can count symbols and after
+ * every N symbols, compare the expected distribution of symbols based on the
+ * previous data with the actual distribution.  If they differ "by enough", then
+ * start a new block.
+ *
+ * As an optimization and heuristic, we don't distinguish between every symbol
+ * but rather we combine many symbols into a single "observation type".  For
+ * literals we only look at the high bits and low bits, and for matches we only
+ * look at whether the match is long or not.  The assumption is that for typical
+ * "real" data, places that are good block boundaries will tend to be noticeable
+ * based only on changes in these aggregate probabilities, without looking for
+ * subtle differences in individual symbols.  For example, a change from ASCII
+ * bytes to non-ASCII bytes, or from few matches (generally less compressible)
+ * to many matches (generally more compressible), would be easily noticed based
+ * on the aggregates.
+ *
+ * For determining whether the probability distributions are "different enough"
+ * to start a new block, the simple heuristic of splitting when the sum of
+ * absolute differences exceeds a constant seems to be good enough.  We also add
+ * a number proportional to the block length so that the algorithm is more
+ * likely to end long blocks than short blocks.  This reflects the general
+ * expectation that it will become increasingly beneficial to start a new block
+ * as the current block grows longer.
+ *
+ * Finally, for an approximation, it is not strictly necessary that the exact
+ * symbols being used are considered.  With "near-optimal parsing", for example,
+ * the actual symbols that will be used are unknown until after the block
+ * boundary is chosen and the block has been optimized.  Since the final choices
+ * cannot be used, we can use preliminary "greedy" choices instead.
+ */
+
+/* Initialize the block split statistics when starting a new block. */
+static void
+init_block_split_stats(struct block_split_stats *stats)
+{
+	int i;
+
+	for (i = 0; i < NUM_OBSERVATION_TYPES; i++) {
+		stats->new_observations[i] = 0;
+		stats->observations[i] = 0;
+	}
+	stats->num_new_observations = 0;
+	stats->num_observations = 0;
+}
+
+/*
+ * Literal observation.  Heuristic: use the top 2 bits and low 1 bits of the
+ * literal, for 8 possible literal observation types.
+ */
+static forceinline void
+observe_literal(struct block_split_stats *stats, u8 lit)
+{
+	stats->new_observations[((lit >> 5) & 0x6) | (lit & 1)]++;
+	stats->num_new_observations++;
+}
+
+/*
+ * Match observation.  Heuristic: use one observation type for "short match" and
+ * one observation type for "long match".
+ */
+static forceinline void
+observe_match(struct block_split_stats *stats, unsigned length)
+{
+	stats->new_observations[NUM_LITERAL_OBSERVATION_TYPES +
+				(length >= 9)]++;
+	stats->num_new_observations++;
+}
+
+static void
+merge_new_observations(struct block_split_stats *stats)
+{
+	int i;
+
+	for (i = 0; i < NUM_OBSERVATION_TYPES; i++) {
+		stats->observations[i] += stats->new_observations[i];
+		stats->new_observations[i] = 0;
+	}
+	stats->num_observations += stats->num_new_observations;
+	stats->num_new_observations = 0;
+}
+
+static bool
+do_end_block_check(struct block_split_stats *stats, u32 block_length)
+{
+	if (stats->num_observations > 0) {
+		/*
+		 * Compute the sum of absolute differences of probabilities.  To
+		 * avoid needing to use floating point arithmetic or do slow
+		 * divisions, we do all arithmetic with the probabilities
+		 * multiplied by num_observations * num_new_observations.  E.g.,
+		 * for the "old" observations the probabilities would be
+		 * (double)observations[i] / num_observations, but since we
+		 * multiply by both num_observations and num_new_observations we
+		 * really do observations[i] * num_new_observations.
+		 */
+		u32 total_delta = 0;
+		u32 num_items;
+		u32 cutoff;
+		int i;
+
+		for (i = 0; i < NUM_OBSERVATION_TYPES; i++) {
+			u32 expected = stats->observations[i] *
+				       stats->num_new_observations;
+			u32 actual = stats->new_observations[i] *
+				     stats->num_observations;
+			u32 delta = (actual > expected) ? actual - expected :
+							  expected - actual;
+
+			total_delta += delta;
+		}
+
+		num_items = stats->num_observations +
+			    stats->num_new_observations;
+		/*
+		 * Heuristic: the cutoff is when the sum of absolute differences
+		 * of probabilities becomes at least 200/512.  As above, the
+		 * probability is multiplied by both num_new_observations and
+		 * num_observations.  Be careful to avoid integer overflow.
+		 */
+		cutoff = stats->num_new_observations * 200 / 512 *
+			 stats->num_observations;
+		/*
+		 * Very short blocks have a lot of overhead for the Huffman
+		 * codes, so only use them if it clearly seems worthwhile.
+		 * (This is an additional penalty, which adds to the smaller
+		 * penalty below which scales more slowly.)
+		 */
+		if (block_length < 10000 && num_items < 8192)
+			cutoff += (u64)cutoff * (8192 - num_items) / 8192;
+
+		/* Ready to end the block? */
+		if (total_delta +
+		    (block_length / 4096) * stats->num_observations >= cutoff)
+			return true;
+	}
+	merge_new_observations(stats);
+	return false;
+}
+
+static forceinline bool
+ready_to_check_block(const struct block_split_stats *stats,
+		     const u8 *in_block_begin, const u8 *in_next,
+		     const u8 *in_end)
+{
+	return stats->num_new_observations >= NUM_OBSERVATIONS_PER_BLOCK_CHECK
+		&& in_next - in_block_begin >= MIN_BLOCK_LENGTH
+		&& in_end - in_next >= MIN_BLOCK_LENGTH;
+}
+
+static forceinline bool
+should_end_block(struct block_split_stats *stats,
+		 const u8 *in_block_begin, const u8 *in_next, const u8 *in_end)
+{
+	/* Ready to try to end the block (again)? */
+	if (!ready_to_check_block(stats, in_block_begin, in_next, in_end))
+		return false;
+
+	return do_end_block_check(stats, in_next - in_block_begin);
+}
+
+/******************************************************************************/
+
+static void
+deflate_begin_sequences(struct libdeflate_compressor *c,
+			struct deflate_sequence *first_seq)
+{
+	deflate_reset_symbol_frequencies(c);
+	first_seq->litrunlen_and_length = 0;
+}
+
+static forceinline void
+deflate_choose_literal(struct libdeflate_compressor *c, unsigned literal,
+		       bool gather_split_stats, struct deflate_sequence *seq)
+{
+	c->freqs.litlen[literal]++;
+
+	if (gather_split_stats)
+		observe_literal(&c->split_stats, literal);
+
+	STATIC_ASSERT(MAX_BLOCK_LENGTH <= SEQ_LITRUNLEN_MASK);
+	seq->litrunlen_and_length++;
+}
+
+static forceinline void
+deflate_choose_match(struct libdeflate_compressor *c,
+		     unsigned length, unsigned offset, bool gather_split_stats,
+		     struct deflate_sequence **seq_p)
+{
+	struct deflate_sequence *seq = *seq_p;
+	unsigned length_slot = deflate_length_slot[length];
+	unsigned offset_slot = deflate_get_offset_slot(offset);
+
+	c->freqs.litlen[DEFLATE_FIRST_LEN_SYM + length_slot]++;
+	c->freqs.offset[offset_slot]++;
+	if (gather_split_stats)
+		observe_match(&c->split_stats, length);
+
+	seq->litrunlen_and_length |= (u32)length << SEQ_LENGTH_SHIFT;
+	seq->offset = offset;
+	seq->offset_slot = offset_slot;
+
+	seq++;
+	seq->litrunlen_and_length = 0;
+	*seq_p = seq;
+}
+
+/*
+ * Decrease the maximum and nice match lengths if we're approaching the end of
+ * the input buffer.
+ */
+static forceinline void
+adjust_max_and_nice_len(unsigned *max_len, unsigned *nice_len, size_t remaining)
+{
+	if (unlikely(remaining < DEFLATE_MAX_MATCH_LEN)) {
+		*max_len = remaining;
+		*nice_len = MIN(*nice_len, *max_len);
+	}
+}
+
+/*
+ * Choose the minimum match length for the greedy and lazy parsers.
+ *
+ * By default the minimum match length is 3, which is the smallest length the
+ * DEFLATE format allows.  However, with greedy and lazy parsing, some data
+ * (e.g. DNA sequencing data) benefits greatly from a longer minimum length.
+ * Typically, this is because literals are very cheap.  In general, the
+ * near-optimal parser handles this case naturally, but the greedy and lazy
+ * parsers need a heuristic to decide when to use short matches.
+ *
+ * The heuristic we use is to make the minimum match length depend on the number
+ * of different literals that exist in the data.  If there are many different
+ * literals, then literals will probably be expensive, so short matches will
+ * probably be worthwhile.  Conversely, if not many literals are used, then
+ * probably literals will be cheap and short matches won't be worthwhile.
+ */
+static unsigned
+choose_min_match_len(unsigned num_used_literals, unsigned max_search_depth)
+{
+	/* map from num_used_literals to min_len */
+	static const u8 min_lens[] = {
+		9, 9, 9, 9, 9, 9, 8, 8, 7, 7, 6, 6, 6, 6, 6, 6,
+		5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+		5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 4, 4, 4,
+		4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+		4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+		/* The rest is implicitly 3. */
+	};
+	unsigned min_len;
+
+	STATIC_ASSERT(DEFLATE_MIN_MATCH_LEN <= 3);
+	STATIC_ASSERT(ARRAY_LEN(min_lens) <= DEFLATE_NUM_LITERALS + 1);
+
+	if (num_used_literals >= ARRAY_LEN(min_lens))
+		return 3;
+	min_len = min_lens[num_used_literals];
+	/*
+	 * With a low max_search_depth, it may be too hard to find long matches.
+	 */
+	if (max_search_depth < 16) {
+		if (max_search_depth < 5)
+			min_len = MIN(min_len, 4);
+		else if (max_search_depth < 10)
+			min_len = MIN(min_len, 5);
+		else
+			min_len = MIN(min_len, 7);
+	}
+	return min_len;
+}
+
+static unsigned
+calculate_min_match_len(const u8 *data, size_t data_len,
+			unsigned max_search_depth)
+{
+	u8 used[256] = { 0 };
+	unsigned num_used_literals = 0;
+	size_t i;
+
+	/*
+	 * For very short inputs, the static Huffman code has a good chance of
+	 * being best, in which case there is no reason to avoid short matches.
+	 */
+	if (data_len < 512)
+		return DEFLATE_MIN_MATCH_LEN;
+
+	/*
+	 * For an initial approximation, scan the first 4 KiB of data.  The
+	 * caller may use recalculate_min_match_len() to update min_len later.
+	 */
+	data_len = MIN(data_len, 4096);
+	for (i = 0; i < data_len; i++)
+		used[data[i]] = 1;
+	for (i = 0; i < 256; i++)
+		num_used_literals += used[i];
+	return choose_min_match_len(num_used_literals, max_search_depth);
+}
+
+/*
+ * Recalculate the minimum match length for a block, now that we know the
+ * distribution of literals that are actually being used (freqs->litlen).
+ */
+static unsigned
+recalculate_min_match_len(const struct deflate_freqs *freqs,
+			  unsigned max_search_depth)
+{
+	u32 literal_freq = 0;
+	u32 cutoff;
+	unsigned num_used_literals = 0;
+	int i;
+
+	for (i = 0; i < DEFLATE_NUM_LITERALS; i++)
+		literal_freq += freqs->litlen[i];
+
+	cutoff = literal_freq >> 10; /* Ignore literals used very rarely. */
+
+	for (i = 0; i < DEFLATE_NUM_LITERALS; i++) {
+		if (freqs->litlen[i] > cutoff)
+			num_used_literals++;
+	}
+	return choose_min_match_len(num_used_literals, max_search_depth);
+}
+
+static forceinline const u8 *
+choose_max_block_end(const u8 *in_block_begin, const u8 *in_end,
+		     size_t soft_max_len)
+{
+	if (in_end - in_block_begin < soft_max_len + MIN_BLOCK_LENGTH)
+		return in_end;
+	return in_block_begin + soft_max_len;
+}
+
+/*
+ * This is the level 0 "compressor".  It always outputs uncompressed blocks.
+ */
+static size_t
+deflate_compress_none(const u8 *in, size_t in_nbytes,
+		      u8 *out, size_t out_nbytes_avail,
+			  bitbuf_t bitbuf,unsigned bitcount,u8 is_final_block)
+{
+	const u8 *in_next = in;
+	const u8 * const in_end = in + in_nbytes;
+	u8 *out_next = out;
+	u8 * const out_end = out + out_nbytes_avail;
+    ASSERT(bitcount<=7);
+	STATIC_ASSERT(DEFLATE_BLOCKTYPE_UNCOMPRESSED == 0);
+
+	/*
+	 * If the input is zero-length, we still must output a block in order
+	 * for the output to be a valid DEFLATE stream.  Handle this case
+	 * specially to avoid potentially passing NULL to memcpy() below.
+	 */
+	if (unlikely((in_nbytes == 0)&&(bitcount<=5))) {
+		if (unlikely(out_nbytes_avail < 5))
+			return 0;
+		/* BFINAL and BTYPE */
+		*out_next++ = (u8)((is_final_block<<bitcount) | bitbuf);
+		/* LEN and NLEN */
+		put_unaligned_le32(0xFFFF0000, out_next);
+		return 5;
+	}
+
+	do {
+		u8 bfinal = 0;
+		size_t len = UINT16_MAX;
+
+		if (in_end - in_next <= UINT16_MAX) {
+			bfinal = is_final_block;
+			len = in_end - in_next;
+		}
+
+		if (bitcount==0){
+        	if (out_end - out_next < 5 + len)
+				return 0;
+			/*
+			* Output BFINAL and BTYPE.  The stream is already byte-aligned
+			* here, so this step always requires outputting exactly 1 byte.
+			*/
+        	*out_next++ = bfinal | (DEFLATE_BLOCKTYPE_UNCOMPRESSED << 1);
+		}else{
+			/* It was already checked that there is enough space. */
+			if (out_end - out_next < DIV_ROUND_UP(bitcount + 3, 8) + 4 + len)
+				return 0;
+			/*
+			* Output BFINAL (1 bit) and BTYPE (2 bits), then align
+			* to a byte boundary.
+			*/
+			*out_next++ = (bfinal << bitcount) | bitbuf;
+			if (unlikely(bitcount > 5))
+				*out_next++ = 0;
+			bitbuf = 0;
+			bitcount = 0;
+		}
+
+		/* Output LEN and NLEN, then the data itself. */
+		put_unaligned_le16(len, out_next);
+		out_next += 2;
+		put_unaligned_le16(~len, out_next);
+		out_next += 2;
+		memcpy(out_next, in_next, len);
+		out_next += len;
+		in_next += len;
+	} while (in_next != in_end);
+
+	return out_next - out;
+}
+
+/*
+ * This is a faster variant of deflate_compress_greedy().  It uses the
+ * ht_matchfinder rather than the hc_matchfinder.  It also skips the block
+ * splitting algorithm and just uses fixed length blocks.  c->max_search_depth
+ * has no effect with this algorithm, as it is hardcoded in ht_matchfinder.h.
+ */
+static void
+deflate_compress_fastest(struct libdeflate_compressor * restrict c,
+			 const u8* in_block_with_dict,size_t dict_nbytes, size_t in_nbytes,
+			 size_t in_border_nbytes,struct deflate_output_bitstream *os)
+{
+	const u8 *in_next = in_block_with_dict+dict_nbytes;
+	const u8 *in_end = in_next + in_nbytes;
+	const u8* in_border_end= in_end + in_border_nbytes;
+	const u8 *in_cur_base = in_block_with_dict;
+	size_t   dict_nbytes_continue;
+	unsigned max_len = DEFLATE_MAX_MATCH_LEN;
+	unsigned nice_len = MIN(c->nice_match_length, max_len);
+	u32 next_hash;
+
+	if (c->dict_pos_for_blocks_continue == ~(size_t)0){
+		dict_nbytes_continue=0;
+		next_hash=0;
+		ht_matchfinder_init(&c->p.f.ht_mf);
+	}else{
+		dict_nbytes_continue=dict_nbytes - c->dict_pos_for_blocks_continue;
+		next_hash=c->next_hashes_for_blocks_continue0;
+		ASSERT(c->slide_pos_for_blocks_continue<=MATCHFINDER_WINDOW_SIZE);
+		in_cur_base=in_block_with_dict+dict_nbytes - c->slide_pos_for_blocks_continue;
+	}
+
+	if (dict_nbytes > dict_nbytes_continue){
+		ASSERT(dict_nbytes-dict_nbytes_continue<=MATCHFINDER_WINDOW_SIZE);
+		ht_matchfinder_skip_bytes(&c->p.f.ht_mf,
+						&in_cur_base,
+						in_cur_base+dict_nbytes_continue,
+						in_border_end,
+						dict_nbytes-dict_nbytes_continue,
+						&next_hash);
+	}
+
+	do {
+		/* Starting a new DEFLATE block */
+
+		const u8 * const in_block_begin = in_next;
+		const u8 * const in_max_block_end = choose_max_block_end(
+				in_next, in_end, FAST_SOFT_MAX_BLOCK_LENGTH);
+		struct deflate_sequence *seq = c->p.f.sequences;
+
+		deflate_begin_sequences(c, seq);
+
+		do {
+			u32 length;
+			u32 offset;
+			size_t remaining = in_border_end - in_next;
+			size_t length_limit = in_end - in_next;
+
+			if (unlikely(remaining < DEFLATE_MAX_MATCH_LEN)) {
+				max_len = remaining;
+				if (unlikely(length_limit<HT_MATCHFINDER_REQUIRED_NBYTES)){
+					do {
+						deflate_choose_literal(c,
+							*in_next++, false, seq);
+					} while (--length_limit);
+					break;
+				}
+				nice_len = MIN(nice_len, max_len);
+			}
+			length = ht_matchfinder_longest_match(&c->p.f.ht_mf,
+							      &in_cur_base,
+							      in_next,
+							      max_len,
+							      nice_len,
+							      &next_hash,
+							      &offset);
+			length=MIN(length_limit,length);
+			if (length>=HT_MATCHFINDER_MIN_MATCH_LEN) {
+				/* Match found */
+				deflate_choose_match(c, length, offset, false,
+						     &seq);
+				ht_matchfinder_skip_bytes(&c->p.f.ht_mf,
+							  &in_cur_base,
+							  in_next + 1,
+							  in_border_end,
+							  length - 1,
+							  &next_hash);
+				in_next += length;
+			} else {
+				/* No match found */
+				deflate_choose_literal(c, *in_next++, false,
+						       seq);
+			}
+
+			/* Check if it's time to output another block. */
+		} while (in_next < in_max_block_end &&
+			 seq < &c->p.f.sequences[FAST_SEQ_STORE_LENGTH]);
+
+		deflate_finish_block(c, os, in_block_begin,
+				     in_next - in_block_begin,
+				     c->p.f.sequences, in_next == in_end);
+	} while (in_next != in_end && !os->overflow);
+	c->next_hashes_for_blocks_continue0=next_hash;
+	c->slide_pos_for_blocks_continue=in_end-in_cur_base;
+}
+
+/*
+ * This is the "greedy" DEFLATE compressor. It always chooses the longest match.
+ */
+static void
+deflate_compress_greedy(struct libdeflate_compressor * restrict c,
+			const u8* in_block_with_dict,size_t dict_nbytes, size_t in_nbytes,
+			size_t in_border_nbytes,struct deflate_output_bitstream *os)
+{
+	const u8 *in_next = in_block_with_dict+dict_nbytes;
+	const u8 *in_end = in_next + in_nbytes;
+	const u8* in_border_end= in_end + in_border_nbytes;
+	const u8 *in_cur_base = in_block_with_dict;
+	size_t   dict_nbytes_continue;
+	unsigned max_len = DEFLATE_MAX_MATCH_LEN;
+	unsigned nice_len = MIN(c->nice_match_length, max_len);
+	u32 next_hashes[2];
+
+	if (c->dict_pos_for_blocks_continue == ~(size_t)0){
+		dict_nbytes_continue=0;
+		next_hashes[0]=0;
+		next_hashes[1]=0;
+		hc_matchfinder_init(&c->p.g.hc_mf);
+	}else{
+		dict_nbytes_continue=dict_nbytes - c->dict_pos_for_blocks_continue;
+		next_hashes[0]=c->next_hashes_for_blocks_continue0;
+		next_hashes[1]=c->next_hashes_for_blocks_continue1;
+		ASSERT(c->slide_pos_for_blocks_continue<=MATCHFINDER_WINDOW_SIZE);
+		in_cur_base=in_block_with_dict+dict_nbytes - c->slide_pos_for_blocks_continue;
+	}
+	if (dict_nbytes > dict_nbytes_continue){
+		hc_matchfinder_skip_bytes(&c->p.g.hc_mf,
+						&in_cur_base,
+						in_cur_base+dict_nbytes_continue,
+						in_border_end,
+						dict_nbytes-dict_nbytes_continue,
+						next_hashes);
+	}
+
+	do {
+		/* Starting a new DEFLATE block */
+
+		const u8 * const in_block_begin = in_next;
+		const u8 * const in_max_block_end = choose_max_block_end(
+				in_next, in_end, SOFT_MAX_BLOCK_LENGTH);
+		struct deflate_sequence *seq = c->p.g.sequences;
+		unsigned min_len;
+
+		init_block_split_stats(&c->split_stats);
+		deflate_begin_sequences(c, seq);
+		min_len = calculate_min_match_len(in_next,
+						  in_max_block_end - in_next,
+						  c->max_search_depth);
+		do {
+			u32 length;
+			u32 offset;
+			const size_t length_limit = in_end - in_next;
+
+			adjust_max_and_nice_len(&max_len, &nice_len,
+						in_border_end - in_next);
+			length = hc_matchfinder_longest_match(
+						&c->p.g.hc_mf,
+						&in_cur_base,
+						in_next,
+						min_len - 1,
+						max_len,
+						nice_len,
+						c->max_search_depth,
+						next_hashes,
+						&offset);
+			length=MIN(length_limit,length);
+			if (length >= min_len &&
+			    (length > DEFLATE_MIN_MATCH_LEN ||
+			     offset <= 4096)) {
+				/* Match found */
+				deflate_choose_match(c, length, offset, true,
+						     &seq);
+				hc_matchfinder_skip_bytes(&c->p.g.hc_mf,
+							  &in_cur_base,
+							  in_next + 1,
+							  in_border_end,
+							  length - 1,
+							  next_hashes);
+				in_next += length;
+			} else {
+				/* No match found */
+				deflate_choose_literal(c, *in_next++, true,
+						       seq);
+			}
+
+			/* Check if it's time to output another block. */
+		} while (in_next < in_max_block_end &&
+			 seq < &c->p.g.sequences[SEQ_STORE_LENGTH] &&
+			 !should_end_block(&c->split_stats,
+					   in_block_begin, in_next, in_end));
+
+		deflate_finish_block(c, os, in_block_begin,
+				     in_next - in_block_begin,
+				     c->p.g.sequences, in_next == in_end);
+	} while (in_next != in_end && !os->overflow);
+	c->next_hashes_for_blocks_continue0=next_hashes[0];
+	c->next_hashes_for_blocks_continue1=next_hashes[1];
+	c->slide_pos_for_blocks_continue=in_end-in_cur_base;
+}
+
+static void
+deflate_compress_lazy_generic(struct libdeflate_compressor * restrict c,
+			      const u8 *in_block_with_dict,size_t dict_nbytes, size_t in_nbytes,
+			      size_t in_border_nbytes,struct deflate_output_bitstream *os)
+{
+	const u8 *in_next = in_block_with_dict+dict_nbytes;
+	const u8 *in_end = in_next + in_nbytes;
+	const u8* in_border_end= in_end + in_border_nbytes;
+	const u8 *in_cur_base = in_block_with_dict;
+	size_t   dict_nbytes_continue;
+	unsigned max_len = DEFLATE_MAX_MATCH_LEN;
+	unsigned nice_len = MIN(c->nice_match_length, max_len);
+	u32 next_hashes[2];
+
+	if (c->dict_pos_for_blocks_continue == ~(size_t)0){
+		dict_nbytes_continue=0;
+		next_hashes[0]=0;
+		next_hashes[1]=0;
+		hc_matchfinder_init(&c->p.g.hc_mf);
+	}else{
+		dict_nbytes_continue=dict_nbytes - c->dict_pos_for_blocks_continue;
+		next_hashes[0]=c->next_hashes_for_blocks_continue0;
+		next_hashes[1]=c->next_hashes_for_blocks_continue1;
+		ASSERT(c->slide_pos_for_blocks_continue<=MATCHFINDER_WINDOW_SIZE);
+		in_cur_base=in_block_with_dict+dict_nbytes - c->slide_pos_for_blocks_continue;
+	}
+	if (dict_nbytes > dict_nbytes_continue){
+		hc_matchfinder_skip_bytes(&c->p.g.hc_mf,
+						&in_cur_base,
+						in_cur_base+dict_nbytes_continue,
+						in_border_end,
+						dict_nbytes-dict_nbytes_continue,
+						next_hashes);
+	}
+
+	do {
+		/* Starting a new DEFLATE block */
+
+		const u8 * const in_block_begin = in_next;
+		const u8 * const in_max_block_end = choose_max_block_end(
+				in_next, in_end, SOFT_MAX_BLOCK_LENGTH);
+		const u8 *next_recalc_min_len =
+			in_next + MIN(in_end - in_next, 10000);
+		struct deflate_sequence *seq = c->p.g.sequences;
+		unsigned min_len;
+
+		init_block_split_stats(&c->split_stats);
+		deflate_begin_sequences(c, seq);
+		min_len = calculate_min_match_len(in_next,
+						  in_max_block_end - in_next,
+						  c->max_search_depth);
+		do {
+			unsigned cur_len;
+			unsigned cur_offset;
+			unsigned next_len;
+			unsigned next_offset;
+			size_t length_limit = in_end - in_next;
+
+			/*
+			 * Recalculate the minimum match length if it hasn't
+			 * been done recently.
+			 */
+			if (in_next >= next_recalc_min_len) {
+				min_len = recalculate_min_match_len(
+						&c->freqs,
+						c->max_search_depth);
+				next_recalc_min_len +=
+					MIN(in_end - next_recalc_min_len,
+					    in_next - in_block_begin);
+			}
+
+			/* Find the longest match at the current position. */
+			adjust_max_and_nice_len(&max_len, &nice_len,
+						in_border_end - in_next);
+			cur_len = hc_matchfinder_longest_match(
+						&c->p.g.hc_mf,
+						&in_cur_base,
+						in_next,
+						min_len - 1,
+						max_len,
+						nice_len,
+						c->max_search_depth,
+						next_hashes,
+						&cur_offset);
+			cur_len=MIN(length_limit,cur_len);
+			if (cur_len < min_len ||
+			    (cur_len == DEFLATE_MIN_MATCH_LEN &&
+			     cur_offset > 8192)) {
+				/* No match found.  Choose a literal. */
+				deflate_choose_literal(c, *in_next++, true,
+						       seq);
+				continue;
+			}
+			in_next++;
+
+have_cur_match:
+			/*
+			 * We have a match at the current position.
+			 * If it's very long, choose it immediately.
+			 */
+			if (cur_len >= nice_len) {
+				deflate_choose_match(c, cur_len, cur_offset,
+						     true, &seq);
+				hc_matchfinder_skip_bytes(&c->p.g.hc_mf,
+							  &in_cur_base,
+							  in_next,
+							  in_border_end,
+							  cur_len - 1,
+							  next_hashes);
+				in_next += cur_len - 1;
+				continue;
+			}
+
+			/*
+			 * Try to find a better match at the next position.
+			 *
+			 * Note: since we already have a match at the *current*
+			 * position, we use only half the 'max_search_depth'
+			 * when checking the *next* position.  This is a useful
+			 * trade-off because it's more worthwhile to use a
+			 * greater search depth on the initial match.
+			 *
+			 * Note: it's possible to structure the code such that
+			 * there's only one call to longest_match(), which
+			 * handles both the "find the initial match" and "try to
+			 * find a better match" cases.  However, it is faster to
+			 * have two call sites, with longest_match() inlined at
+			 * each.
+			 */
+			adjust_max_and_nice_len(&max_len, &nice_len,
+						in_border_end - in_next);
+			length_limit = in_end - in_next;
+			next_len = hc_matchfinder_longest_match(
+						&c->p.g.hc_mf,
+						&in_cur_base,
+						in_next++,
+						cur_len - 1,
+						max_len,
+						nice_len,
+						c->max_search_depth >> 1,
+						next_hashes,
+						&next_offset);
+			next_len=MIN(length_limit,next_len);
+			if (next_len >= cur_len &&
+			    4 * (int)(next_len - cur_len) +
+			    ((int)bsr32(cur_offset) -
+			     (int)bsr32(next_offset)) > 2) {
+				/*
+				 * Found a better match at the next position.
+				 * Output a literal.  Then the next match
+				 * becomes the current match.
+				 */
+				deflate_choose_literal(c, *(in_next - 2), true,
+						       seq);
+				cur_len = next_len;
+				cur_offset = next_offset;
+				goto have_cur_match;
+			}
+
+			if (c->lazy2) {
+				/* In lazy2 mode, look ahead another position */
+				adjust_max_and_nice_len(&max_len, &nice_len,
+							in_border_end - in_next);
+				length_limit = in_end - in_next;
+				next_len = hc_matchfinder_longest_match(
+						&c->p.g.hc_mf,
+						&in_cur_base,
+						in_next++,
+						cur_len - 1,
+						max_len,
+						nice_len,
+						c->max_search_depth >> 2,
+						next_hashes,
+						&next_offset);
+				next_len=MIN(length_limit,next_len);
+				if (next_len >= cur_len &&
+				    4 * (int)(next_len - cur_len) +
+				    ((int)bsr32(cur_offset) -
+				     (int)bsr32(next_offset)) > 6) {
+					/*
+					 * There's a much better match two
+					 * positions ahead, so use two literals.
+					 */
+					deflate_choose_literal(
+						c, *(in_next - 3), true, seq);
+					deflate_choose_literal(
+						c, *(in_next - 2), true, seq);
+					cur_len = next_len;
+					cur_offset = next_offset;
+					goto have_cur_match;
+				}
+				/*
+				 * No better match at either of the next 2
+				 * positions.  Output the current match.
+				 */
+				deflate_choose_match(c, cur_len, cur_offset,
+						     true, &seq);
+				if (cur_len > 3) {
+					hc_matchfinder_skip_bytes(&c->p.g.hc_mf,
+								  &in_cur_base,
+								  in_next,
+								  in_border_end,
+								  cur_len - 3,
+								  next_hashes);
+					in_next += cur_len - 3;
+				}
+			} else { /* !lazy2 */
+				/*
+				 * No better match at the next position.  Output
+				 * the current match.
+				 */
+				deflate_choose_match(c, cur_len, cur_offset,
+						     true, &seq);
+				hc_matchfinder_skip_bytes(&c->p.g.hc_mf,
+							  &in_cur_base,
+							  in_next,
+							  in_border_end,
+							  cur_len - 2,
+							  next_hashes);
+				in_next += cur_len - 2;
+			}
+			/* Check if it's time to output another block. */
+		} while (in_next < in_max_block_end &&
+			 seq < &c->p.g.sequences[SEQ_STORE_LENGTH] &&
+			 !should_end_block(&c->split_stats,
+					   in_block_begin, in_next, in_end));
+
+		deflate_finish_block(c, os, in_block_begin,
+				     in_next - in_block_begin,
+				     c->p.g.sequences, in_next == in_end);
+	} while (in_next != in_end && !os->overflow);
+	c->next_hashes_for_blocks_continue0=next_hashes[0];
+	c->next_hashes_for_blocks_continue1=next_hashes[1];
+	c->slide_pos_for_blocks_continue=in_end-in_cur_base;
+}
+
+#if SUPPORT_NEAR_OPTIMAL_PARSING
+
+/*
+ * Follow the minimum-cost path in the graph of possible match/literal choices
+ * for the current block and compute the frequencies of the Huffman symbols that
+ * would be needed to output those matches and literals.
+ */
+static void
+deflate_tally_item_list(struct libdeflate_compressor *c, u32 block_length)
+{
+	struct deflate_optimum_node *cur_node = &c->p.n.optimum_nodes[0];
+	struct deflate_optimum_node *end_node =
+		&c->p.n.optimum_nodes[block_length];
+
+	do {
+		unsigned length = cur_node->item & OPTIMUM_LEN_MASK;
+		unsigned offset = cur_node->item >> OPTIMUM_OFFSET_SHIFT;
+
+		if (length == 1) {
+			/* Literal */
+			c->freqs.litlen[offset]++;
+		} else {
+			/* Match */
+			c->freqs.litlen[DEFLATE_FIRST_LEN_SYM +
+					deflate_length_slot[length]]++;
+			c->freqs.offset[c->p.n.offset_slot_full[offset]]++;
+		}
+		cur_node += length;
+	} while (cur_node != end_node);
+
+	/* Tally the end-of-block symbol. */
+	c->freqs.litlen[DEFLATE_END_OF_BLOCK]++;
+}
+
+static void
+deflate_choose_all_literals(struct libdeflate_compressor *c,
+			    const u8 *block, u32 block_length)
+{
+	u32 i;
+
+	deflate_reset_symbol_frequencies(c);
+	for (i = 0; i < block_length; i++)
+		c->freqs.litlen[block[i]]++;
+	c->freqs.litlen[DEFLATE_END_OF_BLOCK]++;
+
+	deflate_make_huffman_codes(&c->freqs, &c->codes);
+}
+
+/*
+ * Compute the exact cost, in bits, that would be required to output the matches
+ * and literals described by @c->freqs as a dynamic Huffman block.  The litlen
+ * and offset codes are assumed to have already been built in @c->codes.
+ */
+static u32
+deflate_compute_true_cost(struct libdeflate_compressor *c)
+{
+	u32 cost = 0;
+	unsigned sym;
+
+	deflate_precompute_huffman_header(c);
+
+	memset(&c->codes.lens.litlen[c->o.precode.num_litlen_syms], 0,
+	       DEFLATE_NUM_LITLEN_SYMS - c->o.precode.num_litlen_syms);
+
+	cost += 5 + 5 + 4 + (3 * c->o.precode.num_explicit_lens);
+	for (sym = 0; sym < DEFLATE_NUM_PRECODE_SYMS; sym++) {
+		cost += c->o.precode.freqs[sym] *
+			(c->o.precode.lens[sym] +
+			 deflate_extra_precode_bits[sym]);
+	}
+
+	for (sym = 0; sym < DEFLATE_FIRST_LEN_SYM; sym++)
+		cost += c->freqs.litlen[sym] * c->codes.lens.litlen[sym];
+
+	for (; sym < DEFLATE_FIRST_LEN_SYM +
+	       ARRAY_LEN(deflate_extra_length_bits); sym++)
+		cost += c->freqs.litlen[sym] *
+			(c->codes.lens.litlen[sym] +
+			 deflate_extra_length_bits[sym - DEFLATE_FIRST_LEN_SYM]);
+
+	for (sym = 0; sym < ARRAY_LEN(deflate_extra_offset_bits); sym++)
+		cost += c->freqs.offset[sym] *
+			(c->codes.lens.offset[sym] +
+			 deflate_extra_offset_bits[sym]);
+	return cost;
+}
+
+/* Set the current cost model from the codeword lengths specified in @lens. */
+static void
+deflate_set_costs_from_codes(struct libdeflate_compressor *c,
+			     const struct deflate_lens *lens)
+{
+	unsigned i;
+
+	/* Literals */
+	for (i = 0; i < DEFLATE_NUM_LITERALS; i++) {
+		u32 bits = (lens->litlen[i] ?
+			    lens->litlen[i] : LITERAL_NOSTAT_BITS);
+
+		c->p.n.costs.literal[i] = bits * BIT_COST;
+	}
+
+	/* Lengths */
+	for (i = DEFLATE_MIN_MATCH_LEN; i <= DEFLATE_MAX_MATCH_LEN; i++) {
+		unsigned length_slot = deflate_length_slot[i];
+		unsigned litlen_sym = DEFLATE_FIRST_LEN_SYM + length_slot;
+		u32 bits = (lens->litlen[litlen_sym] ?
+			    lens->litlen[litlen_sym] : LENGTH_NOSTAT_BITS);
+
+		bits += deflate_extra_length_bits[length_slot];
+		c->p.n.costs.length[i] = bits * BIT_COST;
+	}
+
+	/* Offset slots */
+	for (i = 0; i < ARRAY_LEN(deflate_offset_slot_base); i++) {
+		u32 bits = (lens->offset[i] ?
+			    lens->offset[i] : OFFSET_NOSTAT_BITS);
+
+		bits += deflate_extra_offset_bits[i];
+		c->p.n.costs.offset_slot[i] = bits * BIT_COST;
+	}
+}
+
+/*
+ * This lookup table gives the default cost of a literal symbol and of a length
+ * symbol, depending on the characteristics of the input data.  It was generated
+ * by scripts/gen_default_litlen_costs.py.
+ *
+ * This table is indexed first by the estimated match probability:
+ *
+ *	i=0: data doesn't contain many matches	[match_prob=0.25]
+ *	i=1: neutral				[match_prob=0.50]
+ *	i=2: data contains lots of matches	[match_prob=0.75]
+ *
+ * This lookup produces a subtable which maps the number of distinct used
+ * literals to the default cost of a literal symbol, i.e.:
+ *
+ *	int(-log2((1 - match_prob) / num_used_literals) * BIT_COST)
+ *
+ * ... for num_used_literals in [1, 256] (and 0, which is copied from 1).  This
+ * accounts for literals usually getting cheaper as the number of distinct
+ * literals decreases, and as the proportion of literals to matches increases.
+ *
+ * The lookup also produces the cost of a length symbol, which is:
+ *
+ *	int(-log2(match_prob/NUM_LEN_SLOTS) * BIT_COST)
+ *
+ * Note: we don't currently assign different costs to different literal symbols,
+ * or to different length symbols, as this is hard to do in a useful way.
+ */
+static const struct {
+	u8 used_lits_to_lit_cost[257];
+	u8 len_sym_cost;
+} default_litlen_costs[] = {
+	{ /* match_prob = 0.25 */
+		.used_lits_to_lit_cost = {
+			6, 6, 22, 32, 38, 43, 48, 51,
+			54, 57, 59, 61, 64, 65, 67, 69,
+			70, 72, 73, 74, 75, 76, 77, 79,
+			80, 80, 81, 82, 83, 84, 85, 85,
+			86, 87, 88, 88, 89, 89, 90, 91,
+			91, 92, 92, 93, 93, 94, 95, 95,
+			96, 96, 96, 97, 97, 98, 98, 99,
+			99, 99, 100, 100, 101, 101, 101, 102,
+			102, 102, 103, 103, 104, 104, 104, 105,
+			105, 105, 105, 106, 106, 106, 107, 107,
+			107, 108, 108, 108, 108, 109, 109, 109,
+			109, 110, 110, 110, 111, 111, 111, 111,
+			112, 112, 112, 112, 112, 113, 113, 113,
+			113, 114, 114, 114, 114, 114, 115, 115,
+			115, 115, 115, 116, 116, 116, 116, 116,
+			117, 117, 117, 117, 117, 118, 118, 118,
+			118, 118, 118, 119, 119, 119, 119, 119,
+			120, 120, 120, 120, 120, 120, 121, 121,
+			121, 121, 121, 121, 121, 122, 122, 122,
+			122, 122, 122, 123, 123, 123, 123, 123,
+			123, 123, 124, 124, 124, 124, 124, 124,
+			124, 125, 125, 125, 125, 125, 125, 125,
+			125, 126, 126, 126, 126, 126, 126, 126,
+			127, 127, 127, 127, 127, 127, 127, 127,
+			128, 128, 128, 128, 128, 128, 128, 128,
+			128, 129, 129, 129, 129, 129, 129, 129,
+			129, 129, 130, 130, 130, 130, 130, 130,
+			130, 130, 130, 131, 131, 131, 131, 131,
+			131, 131, 131, 131, 131, 132, 132, 132,
+			132, 132, 132, 132, 132, 132, 132, 133,
+			133, 133, 133, 133, 133, 133, 133, 133,
+			133, 134, 134, 134, 134, 134, 134, 134,
+			134,
+		},
+		.len_sym_cost = 109,
+	}, { /* match_prob = 0.5 */
+		.used_lits_to_lit_cost = {
+			16, 16, 32, 41, 48, 53, 57, 60,
+			64, 66, 69, 71, 73, 75, 76, 78,
+			80, 81, 82, 83, 85, 86, 87, 88,
+			89, 90, 91, 92, 92, 93, 94, 95,
+			96, 96, 97, 98, 98, 99, 99, 100,
+			101, 101, 102, 102, 103, 103, 104, 104,
+			105, 105, 106, 106, 107, 107, 108, 108,
+			108, 109, 109, 110, 110, 110, 111, 111,
+			112, 112, 112, 113, 113, 113, 114, 114,
+			114, 115, 115, 115, 115, 116, 116, 116,
+			117, 117, 117, 118, 118, 118, 118, 119,
+			119, 119, 119, 120, 120, 120, 120, 121,
+			121, 121, 121, 122, 122, 122, 122, 122,
+			123, 123, 123, 123, 124, 124, 124, 124,
+			124, 125, 125, 125, 125, 125, 126, 126,
+			126, 126, 126, 127, 127, 127, 127, 127,
+			128, 128, 128, 128, 128, 128, 129, 129,
+			129, 129, 129, 129, 130, 130, 130, 130,
+			130, 130, 131, 131, 131, 131, 131, 131,
+			131, 132, 132, 132, 132, 132, 132, 133,
+			133, 133, 133, 133, 133, 133, 134, 134,
+			134, 134, 134, 134, 134, 134, 135, 135,
+			135, 135, 135, 135, 135, 135, 136, 136,
+			136, 136, 136, 136, 136, 136, 137, 137,
+			137, 137, 137, 137, 137, 137, 138, 138,
+			138, 138, 138, 138, 138, 138, 138, 139,
+			139, 139, 139, 139, 139, 139, 139, 139,
+			140, 140, 140, 140, 140, 140, 140, 140,
+			140, 141, 141, 141, 141, 141, 141, 141,
+			141, 141, 141, 142, 142, 142, 142, 142,
+			142, 142, 142, 142, 142, 142, 143, 143,
+			143, 143, 143, 143, 143, 143, 143, 143,
+			144,
+		},
+		.len_sym_cost = 93,
+	}, { /* match_prob = 0.75 */
+		.used_lits_to_lit_cost = {
+			32, 32, 48, 57, 64, 69, 73, 76,
+			80, 82, 85, 87, 89, 91, 92, 94,
+			96, 97, 98, 99, 101, 102, 103, 104,
+			105, 106, 107, 108, 108, 109, 110, 111,
+			112, 112, 113, 114, 114, 115, 115, 116,
+			117, 117, 118, 118, 119, 119, 120, 120,
+			121, 121, 122, 122, 123, 123, 124, 124,
+			124, 125, 125, 126, 126, 126, 127, 127,
+			128, 128, 128, 129, 129, 129, 130, 130,
+			130, 131, 131, 131, 131, 132, 132, 132,
+			133, 133, 133, 134, 134, 134, 134, 135,
+			135, 135, 135, 136, 136, 136, 136, 137,
+			137, 137, 137, 138, 138, 138, 138, 138,
+			139, 139, 139, 139, 140, 140, 140, 140,
+			140, 141, 141, 141, 141, 141, 142, 142,
+			142, 142, 142, 143, 143, 143, 143, 143,
+			144, 144, 144, 144, 144, 144, 145, 145,
+			145, 145, 145, 145, 146, 146, 146, 146,
+			146, 146, 147, 147, 147, 147, 147, 147,
+			147, 148, 148, 148, 148, 148, 148, 149,
+			149, 149, 149, 149, 149, 149, 150, 150,
+			150, 150, 150, 150, 150, 150, 151, 151,
+			151, 151, 151, 151, 151, 151, 152, 152,
+			152, 152, 152, 152, 152, 152, 153, 153,
+			153, 153, 153, 153, 153, 153, 154, 154,
+			154, 154, 154, 154, 154, 154, 154, 155,
+			155, 155, 155, 155, 155, 155, 155, 155,
+			156, 156, 156, 156, 156, 156, 156, 156,
+			156, 157, 157, 157, 157, 157, 157, 157,
+			157, 157, 157, 158, 158, 158, 158, 158,
+			158, 158, 158, 158, 158, 158, 159, 159,
+			159, 159, 159, 159, 159, 159, 159, 159,
+			160,
+		},
+		.len_sym_cost = 84,
+	},
+};
+
+/*
+ * Choose the default costs for literal and length symbols.  These symbols are
+ * both part of the litlen alphabet.
+ */
+static void
+deflate_choose_default_litlen_costs(struct libdeflate_compressor *c,
+				    const u8 *block_begin, u32 block_length,
+				    u32 *lit_cost, u32 *len_sym_cost)
+{
+	unsigned num_used_literals = 0;
+	u32 literal_freq = block_length;
+	u32 match_freq = 0;
+	u32 cutoff;
+	u32 i;
+
+	/* Calculate the number of distinct literals that exist in the data. */
+	memset(c->freqs.litlen, 0,
+	       DEFLATE_NUM_LITERALS * sizeof(c->freqs.litlen[0]));
+	cutoff = literal_freq >> 11; /* Ignore literals used very rarely. */
+	for (i = 0; i < block_length; i++)
+		c->freqs.litlen[block_begin[i]]++;
+	for (i = 0; i < DEFLATE_NUM_LITERALS; i++) {
+		if (c->freqs.litlen[i] > cutoff)
+			num_used_literals++;
+	}
+	if (num_used_literals == 0)
+		num_used_literals = 1;
+
+	/*
+	 * Estimate the relative frequency of literals and matches in the
+	 * optimal parsing solution.  We don't know the optimal solution, so
+	 * this can only be a very rough estimate.  Therefore, we basically use
+	 * the match frequency from a greedy parse.  We also apply the min_len
+	 * heuristic used by the greedy and lazy parsers, to avoid counting too
+	 * many matches when literals are cheaper than short matches.
+	 */
+	match_freq = 0;
+	i = choose_min_match_len(num_used_literals, c->max_search_depth);
+	for (; i < ARRAY_LEN(c->p.n.match_len_freqs); i++) {
+		match_freq += c->p.n.match_len_freqs[i];
+		literal_freq -= i * c->p.n.match_len_freqs[i];
+	}
+	if ((s32)literal_freq < 0) /* shouldn't happen */
+		literal_freq = 0;
+
+	if (match_freq > literal_freq)
+		i = 2; /* many matches */
+	else if (match_freq * 4 > literal_freq)
+		i = 1; /* neutral */
+	else
+		i = 0; /* few matches */
+
+	STATIC_ASSERT(BIT_COST == 16);
+	*lit_cost = default_litlen_costs[i].used_lits_to_lit_cost[
+							num_used_literals];
+	*len_sym_cost = default_litlen_costs[i].len_sym_cost;
+}
+
+static forceinline u32
+deflate_default_length_cost(unsigned len, u32 len_sym_cost)
+{
+	unsigned slot = deflate_length_slot[len];
+	u32 num_extra_bits = deflate_extra_length_bits[slot];
+
+	return len_sym_cost + (num_extra_bits * BIT_COST);
+}
+
+static forceinline u32
+deflate_default_offset_slot_cost(unsigned slot)
+{
+	u32 num_extra_bits = deflate_extra_offset_bits[slot];
+	/*
+	 * Assume that all offset symbols are equally probable.
+	 * The resulting cost is 'int(-log2(1/30) * BIT_COST)',
+	 * where 30 is the number of potentially-used offset symbols.
+	 */
+	u32 offset_sym_cost = 4*BIT_COST + (907*BIT_COST)/1000;
+
+	return offset_sym_cost + (num_extra_bits * BIT_COST);
+}
+
+/* Set default symbol costs for the first block's first optimization pass. */
+static void
+deflate_set_default_costs(struct libdeflate_compressor *c,
+			  u32 lit_cost, u32 len_sym_cost)
+{
+	unsigned i;
+
+	/* Literals */
+	for (i = 0; i < DEFLATE_NUM_LITERALS; i++)
+		c->p.n.costs.literal[i] = lit_cost;
+
+	/* Lengths */
+	for (i = DEFLATE_MIN_MATCH_LEN; i <= DEFLATE_MAX_MATCH_LEN; i++)
+		c->p.n.costs.length[i] =
+			deflate_default_length_cost(i, len_sym_cost);
+
+	/* Offset slots */
+	for (i = 0; i < ARRAY_LEN(deflate_offset_slot_base); i++)
+		c->p.n.costs.offset_slot[i] =
+			deflate_default_offset_slot_cost(i);
+}
+
+static forceinline void
+deflate_adjust_cost(u32 *cost_p, u32 default_cost, int change_amount)
+{
+	if (change_amount == 0)
+		/* Block is very similar to previous; prefer previous costs. */
+		*cost_p = (default_cost + 3 * *cost_p) / 4;
+	else if (change_amount == 1)
+		*cost_p = (default_cost + *cost_p) / 2;
+	else if (change_amount == 2)
+		*cost_p = (5 * default_cost + 3 * *cost_p) / 8;
+	else
+		/* Block differs greatly from previous; prefer default costs. */
+		*cost_p = (3 * default_cost + *cost_p) / 4;
+}
+
+static forceinline void
+deflate_adjust_costs_impl(struct libdeflate_compressor *c,
+			  u32 lit_cost, u32 len_sym_cost, int change_amount)
+{
+	unsigned i;
+
+	/* Literals */
+	for (i = 0; i < DEFLATE_NUM_LITERALS; i++)
+		deflate_adjust_cost(&c->p.n.costs.literal[i], lit_cost,
+				    change_amount);
+
+	/* Lengths */
+	for (i = DEFLATE_MIN_MATCH_LEN; i <= DEFLATE_MAX_MATCH_LEN; i++)
+		deflate_adjust_cost(&c->p.n.costs.length[i],
+				    deflate_default_length_cost(i,
+								len_sym_cost),
+				    change_amount);
+
+	/* Offset slots */
+	for (i = 0; i < ARRAY_LEN(deflate_offset_slot_base); i++)
+		deflate_adjust_cost(&c->p.n.costs.offset_slot[i],
+				    deflate_default_offset_slot_cost(i),
+				    change_amount);
+}
+
+/*
+ * Adjust the costs when beginning a new block.
+ *
+ * Since the current costs are optimized for the data already, it can be helpful
+ * to reuse them instead of starting over with the default costs.  However, this
+ * depends on how similar the new block is to the previous block.  Therefore,
+ * use a heuristic to decide how similar the blocks are, and mix together the
+ * current costs and the default costs accordingly.
+ */
+static void
+deflate_adjust_costs(struct libdeflate_compressor *c,
+		     u32 lit_cost, u32 len_sym_cost)
+{
+	u64 total_delta = 0;
+	u64 cutoff;
+	int i;
+
+	/*
+	 * Decide how different the current block is from the previous block,
+	 * using the block splitting statistics from the current and previous
+	 * blocks.  The more different the current block is, the more we prefer
+	 * the default costs rather than the previous block's costs.
+	 *
+	 * The algorithm here is similar to the end-of-block check one, but here
+	 * we compare two entire blocks rather than a partial block with a small
+	 * extra part, and therefore we need 64-bit numbers in some places.
+	 */
+	for (i = 0; i < NUM_OBSERVATION_TYPES; i++) {
+		u64 prev = (u64)c->p.n.prev_observations[i] *
+			    c->split_stats.num_observations;
+		u64 cur = (u64)c->split_stats.observations[i] *
+			  c->p.n.prev_num_observations;
+
+		total_delta += prev > cur ? prev - cur : cur - prev;
+	}
+	cutoff = ((u64)c->p.n.prev_num_observations *
+		  c->split_stats.num_observations * 200) / 512;
+
+	if (total_delta > 3 * cutoff)
+		/* Big change in the data; just use the default costs. */
+		deflate_set_default_costs(c, lit_cost, len_sym_cost);
+	else if (4 * total_delta > 9 * cutoff)
+		deflate_adjust_costs_impl(c, lit_cost, len_sym_cost, 3);
+	else if (2 * total_delta > 3 * cutoff)
+		deflate_adjust_costs_impl(c, lit_cost, len_sym_cost, 2);
+	else if (2 * total_delta > cutoff)
+		deflate_adjust_costs_impl(c, lit_cost, len_sym_cost, 1);
+	else
+		deflate_adjust_costs_impl(c, lit_cost, len_sym_cost, 0);
+}
+
+static void
+deflate_set_initial_costs(struct libdeflate_compressor *c,
+			  const u8 *block_begin, u32 block_length,
+			  bool is_first_block)
+{
+	u32 lit_cost, len_sym_cost;
+
+	deflate_choose_default_litlen_costs(c, block_begin, block_length,
+					    &lit_cost, &len_sym_cost);
+	if (is_first_block)
+		deflate_set_default_costs(c, lit_cost, len_sym_cost);
+	else
+		deflate_adjust_costs(c, lit_cost, len_sym_cost);
+}
+
+/*
+ * Find the minimum-cost path through the graph of possible match/literal
+ * choices for this block.
+ *
+ * We find the minimum cost path from 'c->p.n.optimum_nodes[0]', which
+ * represents the node at the beginning of the block, to
+ * 'c->p.n.optimum_nodes[block_length]', which represents the node at the end of
+ * the block.  Edge costs are evaluated using the cost model 'c->p.n.costs'.
+ *
+ * The algorithm works backwards, starting at the end node and proceeding
+ * backwards one node at a time.  At each node, the minimum cost to reach the
+ * end node is computed and the match/literal choice that begins that path is
+ * saved.
+ */
+static void
+deflate_find_min_cost_path(struct libdeflate_compressor *c,
+			   const u32 block_length,
+			   const struct lz_match *cache_ptr)
+{
+	struct deflate_optimum_node *end_node =
+		&c->p.n.optimum_nodes[block_length];
+	struct deflate_optimum_node *cur_node = end_node;
+
+	cur_node->cost_to_end = 0;
+	do {
+		unsigned num_matches;
+		unsigned literal;
+		u32 best_cost_to_end;
+
+		cur_node--;
+		cache_ptr--;
+
+		num_matches = cache_ptr->length;
+		literal = cache_ptr->offset;
+
+		/* It's always possible to choose a literal. */
+		best_cost_to_end = c->p.n.costs.literal[literal] +
+				   (cur_node + 1)->cost_to_end;
+		cur_node->item = ((u32)literal << OPTIMUM_OFFSET_SHIFT) | 1;
+
+		/* Also consider matches if there are any. */
+		if (num_matches) {
+			const struct lz_match *match;
+			unsigned len;
+			unsigned offset;
+			unsigned offset_slot;
+			u32 offset_cost;
+			u32 cost_to_end;
+
+			/*
+			 * Consider each length from the minimum
+			 * (DEFLATE_MIN_MATCH_LEN) to the length of the longest
+			 * match found at this position.  For each length, we
+			 * consider only the smallest offset for which that
+			 * length is available.  Although this is not guaranteed
+			 * to be optimal due to the possibility of a larger
+			 * offset costing less than a smaller offset to code,
+			 * this is a very useful heuristic.
+			 */
+			match = cache_ptr - num_matches;
+			len = DEFLATE_MIN_MATCH_LEN;
+			do {
+				offset = match->offset;
+				offset_slot = c->p.n.offset_slot_full[offset];
+				offset_cost =
+					c->p.n.costs.offset_slot[offset_slot];
+				do {
+					cost_to_end = offset_cost +
+						c->p.n.costs.length[len] +
+						(cur_node + len)->cost_to_end;
+					if (cost_to_end < best_cost_to_end) {
+						best_cost_to_end = cost_to_end;
+						cur_node->item = len |
+							((u32)offset <<
+							 OPTIMUM_OFFSET_SHIFT);
+					}
+				} while (++len <= match->length);
+			} while (++match != cache_ptr);
+			cache_ptr -= num_matches;
+		}
+		cur_node->cost_to_end = best_cost_to_end;
+	} while (cur_node != &c->p.n.optimum_nodes[0]);
+
+	deflate_reset_symbol_frequencies(c);
+	deflate_tally_item_list(c, block_length);
+	deflate_make_huffman_codes(&c->freqs, &c->codes);
+}
+
+/*
+ * Choose the literals and matches for the current block, then output the block.
+ *
+ * To choose the literal/match sequence, we find the minimum-cost path through
+ * the block's graph of literal/match choices, given a cost model.  However, the
+ * true cost of each symbol is unknown until the Huffman codes have been built,
+ * but at the same time the Huffman codes depend on the frequencies of chosen
+ * symbols.  Consequently, multiple passes must be used to try to approximate an
+ * optimal solution.  The first pass uses default costs, mixed with the costs
+ * from the previous block when it seems appropriate.  Later passes use the
+ * Huffman codeword lengths from the previous pass as the costs.
+ *
+ * As an alternate strategy, also consider using only literals.  The boolean
+ * returned in *used_only_literals indicates whether that strategy was best.
+ */
+static void
+deflate_optimize_and_flush_block(struct libdeflate_compressor *c,
+				 struct deflate_output_bitstream *os,
+				 const u8 *block_begin, u32 block_length,
+				 const struct lz_match *cache_ptr,
+				 bool is_first_block, bool is_final_block, bool _is_in_dict,
+				 bool *used_only_literals)
+{
+	unsigned num_passes_remaining =_is_in_dict ? 1: c->p.n.max_optim_passes;
+	u32 best_true_cost = UINT32_MAX;
+	u32 true_cost;
+	u32 only_lits_cost;
+	u32 static_cost = UINT32_MAX;
+	struct deflate_sequence seq_;
+	struct deflate_sequence *seq = NULL;
+	u32 i;
+
+	/*
+	 * On some data, using only literals (no matches) ends up being better
+	 * than what the iterative optimization algorithm produces.  Therefore,
+	 * consider using only literals.
+	 */
+	deflate_choose_all_literals(c, block_begin, block_length);
+	only_lits_cost = deflate_compute_true_cost(c);
+
+	/*
+	 * Force the block to really end at the desired length, even if some
+	 * matches extend beyond it.
+	 */
+	for (i = block_length;
+	     i <= MIN(block_length - 1 + DEFLATE_MAX_MATCH_LEN,
+		      ARRAY_LEN(c->p.n.optimum_nodes) - 1); i++)
+		c->p.n.optimum_nodes[i].cost_to_end = 0x80000000;
+
+	/*
+	 * Sometimes a static Huffman block ends up being cheapest, particularly
+	 * if the block is small.  So, if the block is sufficiently small, find
+	 * the optimal static block solution and remember its cost.
+	 */
+	if (block_length <= c->p.n.max_len_to_optimize_static_block) {
+		/* Save c->p.n.costs temporarily. */
+		c->p.n.costs_saved = c->p.n.costs;
+
+		deflate_set_costs_from_codes(c, &c->static_codes.lens);
+		deflate_find_min_cost_path(c, block_length, cache_ptr);
+		static_cost = c->p.n.optimum_nodes[0].cost_to_end / BIT_COST;
+		static_cost += 7; /* for the end-of-block symbol */
+
+		/* Restore c->p.n.costs. */
+		c->p.n.costs = c->p.n.costs_saved;
+	}
+
+	/* Initialize c->p.n.costs with default costs. */
+	deflate_set_initial_costs(c, block_begin, block_length, is_first_block);
+
+	do {
+		/*
+		 * Find the minimum-cost path for this pass.
+		 * Also set c->freqs and c->codes to match the path.
+		 */
+		deflate_find_min_cost_path(c, block_length, cache_ptr);
+
+		/*
+		 * Compute the exact cost of the block if the path were to be
+		 * used.  Note that this differs from
+		 * c->p.n.optimum_nodes[0].cost_to_end in that true_cost uses
+		 * the actual Huffman codes instead of c->p.n.costs.
+		 */
+		true_cost = deflate_compute_true_cost(c);
+
+		/*
+		 * If the cost didn't improve much from the previous pass, then
+		 * doing more passes probably won't be helpful, so stop early.
+		 */
+		if (true_cost + c->p.n.min_improvement_to_continue >
+		    best_true_cost)
+			break;
+
+		best_true_cost = true_cost;
+
+		/* Save the cost model that gave 'best_true_cost'. */
+		c->p.n.costs_saved = c->p.n.costs;
+
+		/* Update the cost model from the Huffman codes. */
+		deflate_set_costs_from_codes(c, &c->codes.lens);
+
+	} while (--num_passes_remaining);
+
+	*used_only_literals = false;
+	if (MIN(only_lits_cost, static_cost) < best_true_cost) {
+		if (only_lits_cost < static_cost) {
+			/* Using only literals ended up being best! */
+			deflate_choose_all_literals(c, block_begin, block_length);
+			deflate_set_costs_from_codes(c, &c->codes.lens);
+			seq_.litrunlen_and_length = block_length;
+			seq = &seq_;
+			*used_only_literals = true;
+		} else {
+			/* Static block ended up being best! */
+			deflate_set_costs_from_codes(c, &c->static_codes.lens);
+			deflate_find_min_cost_path(c, block_length, cache_ptr);
+		}
+	} else if (true_cost >=
+		   best_true_cost + c->p.n.min_bits_to_use_nonfinal_path) {
+		/*
+		 * The best solution was actually from a non-final optimization
+		 * pass, so recover and use the min-cost path from that pass.
+		 */
+		c->p.n.costs = c->p.n.costs_saved;
+		deflate_find_min_cost_path(c, block_length, cache_ptr);
+		deflate_set_costs_from_codes(c, &c->codes.lens);
+	}
+	if (!_is_in_dict)
+		deflate_flush_block(c, os, block_begin, block_length, seq, is_final_block);
+}
+
+static void
+deflate_near_optimal_init_stats(struct libdeflate_compressor *c)
+{
+	init_block_split_stats(&c->split_stats);
+	memset(c->p.n.new_match_len_freqs, 0,
+	       sizeof(c->p.n.new_match_len_freqs));
+	memset(c->p.n.match_len_freqs, 0, sizeof(c->p.n.match_len_freqs));
+}
+
+static void
+deflate_near_optimal_merge_stats(struct libdeflate_compressor *c)
+{
+	unsigned i;
+
+	merge_new_observations(&c->split_stats);
+	for (i = 0; i < ARRAY_LEN(c->p.n.match_len_freqs); i++) {
+		c->p.n.match_len_freqs[i] += c->p.n.new_match_len_freqs[i];
+		c->p.n.new_match_len_freqs[i] = 0;
+	}
+}
+
+/*
+ * Save some literal/match statistics from the previous block so that
+ * deflate_adjust_costs() will be able to decide how much the current block
+ * differs from the previous one.
+ */
+static void
+deflate_near_optimal_save_stats(struct libdeflate_compressor *c)
+{
+	int i;
+
+	for (i = 0; i < NUM_OBSERVATION_TYPES; i++)
+		c->p.n.prev_observations[i] = c->split_stats.observations[i];
+	c->p.n.prev_num_observations = c->split_stats.num_observations;
+}
+
+static void
+deflate_near_optimal_clear_old_stats(struct libdeflate_compressor *c)
+{
+	int i;
+
+	for (i = 0; i < NUM_OBSERVATION_TYPES; i++)
+		c->split_stats.observations[i] = 0;
+	c->split_stats.num_observations = 0;
+	memset(c->p.n.match_len_freqs, 0, sizeof(c->p.n.match_len_freqs));
+}
+
+
+
+#define _DEF_near_optimal_init_dict() {	\
+			next_hashes[0]=0; next_hashes[1]=0; \
+			bt_matchfinder_init(&c->p.n.bt_mf);	\
+			deflate_near_optimal_init_stats(c); }
+
+#define _DEF_near_optimal_next_slide()  { in_next_slide = in_cur_base + MATCHFINDER_WINDOW_SIZE; }
+#define _DEF_near_optimal_slide()	{	\
+			bt_matchfinder_slide_window(&c->p.n.bt_mf);	\
+			in_cur_base = in_next;		\
+			_DEF_near_optimal_next_slide();		}
+
+/*
+ * This is the "near-optimal" DEFLATE compressor.  It computes the optimal
+ * representation of each DEFLATE block using a minimum-cost path search over
+ * the graph of possible match/literal choices for that block, assuming a
+ * certain cost for each Huffman symbol.
+ *
+ * For several reasons, the end result is not guaranteed to be optimal:
+ *
+ * - Nonoptimal choice of blocks
+ * - Heuristic limitations on which matches are actually considered
+ * - Symbol costs are unknown until the symbols have already been chosen
+ *   (so iterative optimization must be used)
+ */
+static void
+deflate_compress_near_optimal(struct libdeflate_compressor * restrict c,
+			      const u8 *in_block_with_dict,size_t dict_nbytes, size_t in_nbytes,
+			      size_t in_border_nbytes,struct deflate_output_bitstream *os)
+{
+    const u8* in=in_block_with_dict;
+	const u8 *in_next;
+	const u8 *in_block_begin;
+	const u8 *in_end = in_block_with_dict + dict_nbytes + in_nbytes;
+	const u8* in_border_end= in_end + in_border_nbytes;
+	const u8 *in_cur_base=in_block_with_dict;
+	const u8 *in_next_slide;
+	size_t   dict_nbytes_continue;
+	unsigned max_len = DEFLATE_MAX_MATCH_LEN;
+	unsigned nice_len = MIN(c->nice_match_length, max_len);
+	struct lz_match *cache_ptr = c->p.n.match_cache;
+	u32 next_hashes[2];
+	bool prev_block_used_only_literals = false;
+
+	if (c->dict_pos_for_blocks_continue == ~(size_t)0){
+		dict_nbytes_continue=0;
+		_DEF_near_optimal_init_dict();
+	}else{
+		dict_nbytes_continue=dict_nbytes - c->dict_pos_for_blocks_continue;
+		next_hashes[0]=c->next_hashes_for_blocks_continue0;
+		next_hashes[1]=c->next_hashes_for_blocks_continue1;
+		ASSERT(c->slide_pos_for_blocks_continue<=MATCHFINDER_WINDOW_SIZE);
+		in_cur_base=in_block_with_dict+dict_nbytes - c->slide_pos_for_blocks_continue;
+	}
+	in_next=in_block_with_dict+dict_nbytes_continue;
+	_DEF_near_optimal_next_slide();
+
+	if (dict_nbytes>dict_nbytes_continue){
+		ASSERT(dict_nbytes-dict_nbytes_continue<=MATCHFINDER_WINDOW_SIZE);
+		const u8 * const in_max_block_end = in_next + dict_nbytes-dict_nbytes_continue;
+		for (;;) {
+			if (in_next == in_next_slide)
+				_DEF_near_optimal_slide();
+
+			adjust_max_and_nice_len(&max_len, &nice_len, in_border_end - in_next);
+			bt_matchfinder_skip_byte(
+					&c->p.n.bt_mf,
+					in_cur_base,
+					in_next - in_cur_base,
+					nice_len,
+					c->max_search_depth,
+					next_hashes);
+			in_next++;
+			
+			if (in_next >= in_max_block_end)
+				break;
+		}
+	}
+	in_block_begin = in_next;
+
+	do {
+		/* Starting a new DEFLATE block */
+		const u8 * const in_max_block_end = choose_max_block_end(
+				in_block_begin, in_end, SOFT_MAX_BLOCK_LENGTH);
+		const u8 *prev_end_block_check = NULL;
+		bool change_detected = false;
+		const u8 *next_observation = in_next;
+		unsigned min_len;
+
+		/*
+		 * Use the minimum match length heuristic to improve the
+		 * literal/match statistics gathered during matchfinding.
+		 * However, the actual near-optimal parse won't respect min_len,
+		 * as it can accurately assess the costs of different matches.
+		 *
+		 * If the "use only literals" strategy happened to be the best
+		 * strategy on the previous block, then probably the
+		 * min_match_len heuristic is still not aggressive enough for
+		 * the data, so force gathering literal stats only.
+		 */
+		if (prev_block_used_only_literals)
+			min_len = DEFLATE_MAX_MATCH_LEN + 1;
+		else
+			min_len = calculate_min_match_len(
+					in_block_begin,
+					in_max_block_end - in_block_begin,
+					c->max_search_depth);
+
+		/*
+		 * Find matches until we decide to end the block.  We end the
+		 * block if any of the following is true:
+		 *
+		 * (1) Maximum block length has been reached
+		 * (2) Match catch may overflow.
+		 * (3) Block split heuristic says to split now.
+		 */
+		for (;;) {
+			struct lz_match *matches;
+			unsigned best_len;
+
+			/* Slide the window forward if needed. */
+			if (in_next == in_next_slide)
+				_DEF_near_optimal_slide();
+
+			/*
+			 * Find matches with the current position using the
+			 * binary tree matchfinder and save them in match_cache.
+			 *
+			 * Note: the binary tree matchfinder is more suited for
+			 * optimal parsing than the hash chain matchfinder.  The
+			 * reasons for this include:
+			 *
+			 * - The binary tree matchfinder can find more matches
+			 *   in the same number of steps.
+			 * - One of the major advantages of hash chains is that
+			 *   skipping positions (not searching for matches at
+			 *   them) is faster; however, with optimal parsing we
+			 *   search for matches at almost all positions, so this
+			 *   advantage of hash chains is negated.
+			 */
+			matches = cache_ptr;
+			best_len = 0;
+			adjust_max_and_nice_len(&max_len, &nice_len, in_border_end - in_next);
+			if (likely(max_len >= BT_MATCHFINDER_REQUIRED_NBYTES)) {
+				cache_ptr = bt_matchfinder_get_matches(
+						&c->p.n.bt_mf,
+						in_cur_base,
+						in_next - in_cur_base,
+						max_len,
+						nice_len,
+						c->max_search_depth,
+						next_hashes,
+						matches);
+				if (cache_ptr > matches){
+					const size_t length_limit = in_end - in_next;
+					best_len=MIN(cache_ptr[-1].length,length_limit);
+				}
+			}
+			if (in_next >= next_observation) {
+				if (best_len >= min_len) {
+					observe_match(&c->split_stats,
+						      best_len);
+					next_observation = in_next + best_len;
+					c->p.n.new_match_len_freqs[best_len]++;
+				} else {
+					observe_literal(&c->split_stats,
+							*in_next);
+					next_observation = in_next + 1;
+				}
+			}
+
+			cache_ptr->length = cache_ptr - matches;
+			cache_ptr->offset = *in_next;
+			in_next++;
+			cache_ptr++;
+
+			/*
+			 * If there was a very long match found, don't cache any
+			 * matches for the bytes covered by that match.  This
+			 * avoids degenerate behavior when compressing highly
+			 * redundant data, where the number of matches can be
+			 * very large.
+			 *
+			 * This heuristic doesn't actually hurt the compression
+			 * ratio very much.  If there's a long match, then the
+			 * data must be highly compressible, so it doesn't
+			 * matter much what we do.
+			 */
+			if (best_len >= DEFLATE_MIN_MATCH_LEN &&
+			    best_len >= nice_len) {
+				--best_len;
+				do {
+					if (in_next == in_next_slide)
+						_DEF_near_optimal_slide();
+					adjust_max_and_nice_len(&max_len,
+								&nice_len,
+								in_border_end - in_next);
+					if (max_len >=
+					    BT_MATCHFINDER_REQUIRED_NBYTES) {
+						bt_matchfinder_skip_byte(
+							&c->p.n.bt_mf,
+							in_cur_base,
+							in_next - in_cur_base,
+							nice_len,
+							c->max_search_depth,
+							next_hashes);
+					}
+					cache_ptr->length = 0;
+					cache_ptr->offset = *in_next;
+					in_next++;
+					cache_ptr++;
+				} while (--best_len);
+			}
+			/* Maximum block length or end of input reached? */
+			if (in_next >= in_max_block_end)
+				break;
+			/* Match cache overflowed? */
+			if (cache_ptr >=
+			    &c->p.n.match_cache[MATCH_CACHE_LENGTH])
+				break;
+			/* Not ready to try to end the block (again)? */
+			if (!ready_to_check_block(&c->split_stats,
+						  in_block_begin, in_next,
+						  in_end))
+				continue;
+			/* Check if it would be worthwhile to end the block. */
+			if (do_end_block_check(&c->split_stats,
+					       in_next - in_block_begin)) {
+				change_detected = true;
+				break;
+			}
+			/* Ending the block doesn't seem worthwhile here. */
+			deflate_near_optimal_merge_stats(c);
+			prev_end_block_check = in_next;
+		}
+		/*
+		 * All the matches for this block have been cached.  Now choose
+		 * the precise end of the block and the sequence of items to
+		 * output to represent it, then flush the block.
+		 */
+		if (change_detected && prev_end_block_check != NULL) {
+			/*
+			 * The block is being ended because a recent chunk of
+			 * data differs from the rest of the block.  We could
+			 * end the block at 'in_next' like the greedy and lazy
+			 * compressors do, but that's not ideal since it would
+			 * include the differing chunk in the block.  The
+			 * near-optimal compressor has time to do a better job.
+			 * Therefore, we rewind to just before the chunk, and
+			 * output a block that only goes up to there.
+			 *
+			 * We then set things up to correctly start the next
+			 * block, considering that some work has already been
+			 * done on it (some matches found and stats gathered).
+			 */
+			struct lz_match *orig_cache_ptr = cache_ptr;
+			const u8 *in_block_end = prev_end_block_check;
+			u32 block_length = in_block_end - in_block_begin;
+			bool is_first = (in_block_begin == in);
+			bool is_final = false;
+			u32 num_bytes_to_rewind = in_next - in_block_end;
+			size_t cache_len_rewound;
+
+			/* Rewind the match cache. */
+			do {
+				cache_ptr--;
+				cache_ptr -= cache_ptr->length;
+			} while (--num_bytes_to_rewind);
+			cache_len_rewound = orig_cache_ptr - cache_ptr;
+
+			deflate_optimize_and_flush_block(
+						c, os, in_block_begin,
+						block_length, cache_ptr,
+						is_first, is_final, false,
+						&prev_block_used_only_literals);
+			memmove(c->p.n.match_cache, cache_ptr,
+				cache_len_rewound * sizeof(*cache_ptr));
+			cache_ptr = &c->p.n.match_cache[cache_len_rewound];
+			deflate_near_optimal_save_stats(c);
+			/*
+			 * Clear the stats for the just-flushed block, leaving
+			 * just the stats for the beginning of the next block.
+			 */
+			deflate_near_optimal_clear_old_stats(c);
+			in_block_begin = in_block_end;
+		} else {
+			/*
+			 * The block is being ended for a reason other than a
+			 * differing data chunk being detected.  Don't rewind at
+			 * all; just end the block at the current position.
+			 */
+			u32 block_length = in_next - in_block_begin;
+			bool is_first = (in_block_begin == in);
+			bool is_final = (in_next == in_end);
+
+			deflate_near_optimal_merge_stats(c);
+			deflate_optimize_and_flush_block(
+						c, os, in_block_begin,
+						block_length, cache_ptr,
+						is_first, is_final, false,
+						&prev_block_used_only_literals);
+			cache_ptr = &c->p.n.match_cache[0];
+			deflate_near_optimal_save_stats(c);
+			deflate_near_optimal_init_stats(c);
+			in_block_begin = in_next;
+		}
+	} while (in_next != in_end && !os->overflow);
+	c->next_hashes_for_blocks_continue0=next_hashes[0];
+	c->next_hashes_for_blocks_continue1=next_hashes[1];
+	c->slide_pos_for_blocks_continue=in_end-in_cur_base;
+}
+
+/* Initialize c->p.n.offset_slot_full. */
+static void
+deflate_init_offset_slot_full(struct libdeflate_compressor *c)
+{
+	unsigned offset_slot;
+	unsigned offset;
+	unsigned offset_end;
+
+	for (offset_slot = 0; offset_slot < ARRAY_LEN(deflate_offset_slot_base);
+	     offset_slot++) {
+		offset = deflate_offset_slot_base[offset_slot];
+		offset_end = offset +
+			     (1 << deflate_extra_offset_bits[offset_slot]);
+		do {
+			c->p.n.offset_slot_full[offset] = offset_slot;
+		} while (++offset != offset_end);
+	}
+}
+
+#endif /* SUPPORT_NEAR_OPTIMAL_PARSING */
+
+LIBDEFLATEAPI struct libdeflate_compressor *
+libdeflate_alloc_compressor_ex(int compression_level,
+			       const struct libdeflate_options *options)
+{
+	struct libdeflate_compressor *c;
+	size_t size = offsetof(struct libdeflate_compressor, p);
+
+	check_buildtime_parameters();
+
+	/*
+	 * Note: if more fields are added to libdeflate_options, this code will
+	 * need to be updated to support both the old and new structs.
+	 */
+	if (options->sizeof_options != sizeof(*options))
+		return NULL;
+
+	if (compression_level < 0 || compression_level > 12)
+		return NULL;
+
+#if SUPPORT_NEAR_OPTIMAL_PARSING
+	if (compression_level >= 10)
+		size += sizeof(c->p.n);
+	else
+#endif
+	{
+		if (compression_level >= 2)
+			size += sizeof(c->p.g);
+		else if (compression_level == 1)
+			size += sizeof(c->p.f);
+	}
+
+	c = libdeflate_aligned_malloc(options->malloc_func ?
+				      options->malloc_func :
+				      libdeflate_default_malloc_func,
+				      MATCHFINDER_MEM_ALIGNMENT, size);
+	if (!c)
+		return NULL;
+	c->free_func = options->free_func ?
+		       options->free_func : libdeflate_default_free_func;
+
+	c->compression_level = compression_level;
+	c->in_is_final_block = false;
+	_compress_block_reset(c);
+
+	/*
+	 * The higher the compression level, the more we should bother trying to
+	 * compress very small inputs.
+	 */
+	c->max_passthrough_size = 55 - (compression_level * 4);
+
+	switch (compression_level) {
+	case 0:
+		c->max_passthrough_size = SIZE_MAX;
+		c->impl = NULL; /* not used */
+		break;
+	case 1:
+		c->impl = deflate_compress_fastest;
+		/* max_search_depth is unused. */
+		c->nice_match_length = 32;
+		break;
+	case 2:
+		c->impl = deflate_compress_greedy;
+		c->max_search_depth = 6;
+		c->nice_match_length = 10;
+		break;
+	case 3:
+		c->impl = deflate_compress_greedy;
+		c->max_search_depth = 12;
+		c->nice_match_length = 14;
+		break;
+	case 4:
+		c->impl = deflate_compress_greedy;
+		c->max_search_depth = 16;
+		c->nice_match_length = 30;
+		break;
+	case 5:
+		c->impl = deflate_compress_lazy_generic;
+		c->lazy2 = false;
+		c->max_search_depth = 16;
+		c->nice_match_length = 30;
+		break;
+	case 6:
+		c->impl = deflate_compress_lazy_generic;
+		c->lazy2 = false;
+		c->max_search_depth = 35;
+		c->nice_match_length = 65;
+		break;
+	case 7:
+		c->impl = deflate_compress_lazy_generic;
+		c->lazy2 = false;
+		c->max_search_depth = 100;
+		c->nice_match_length = 130;
+		break;
+	case 8:
+		c->impl = deflate_compress_lazy_generic;
+		c->lazy2 = true;
+		c->max_search_depth = 300;
+		c->nice_match_length = DEFLATE_MAX_MATCH_LEN;
+		break;
+	case 9:
+#if !SUPPORT_NEAR_OPTIMAL_PARSING
+	default:
+#endif
+		c->impl = deflate_compress_lazy_generic;
+		c->lazy2 = true;
+		c->max_search_depth = 600;
+		c->nice_match_length = DEFLATE_MAX_MATCH_LEN;
+		break;
+#if SUPPORT_NEAR_OPTIMAL_PARSING
+	case 10:
+		c->impl = deflate_compress_near_optimal;
+		c->max_search_depth = 35;
+		c->nice_match_length = 75;
+		c->p.n.max_optim_passes = 2;
+		c->p.n.min_improvement_to_continue = 32;
+		c->p.n.min_bits_to_use_nonfinal_path = 32;
+		c->p.n.max_len_to_optimize_static_block = 0;
+		deflate_init_offset_slot_full(c);
+		break;
+	case 11:
+		c->impl = deflate_compress_near_optimal;
+		c->max_search_depth = 100;
+		c->nice_match_length = 150;
+		c->p.n.max_optim_passes = 4;
+		c->p.n.min_improvement_to_continue = 16;
+		c->p.n.min_bits_to_use_nonfinal_path = 16;
+		c->p.n.max_len_to_optimize_static_block = 1000;
+		deflate_init_offset_slot_full(c);
+		break;
+	case 12:
+	default:
+		c->impl = deflate_compress_near_optimal;
+		c->max_search_depth = 300;
+		c->nice_match_length = DEFLATE_MAX_MATCH_LEN;
+		c->p.n.max_optim_passes = 10;
+		c->p.n.min_improvement_to_continue = 1;
+		c->p.n.min_bits_to_use_nonfinal_path = 1;
+		c->p.n.max_len_to_optimize_static_block = 10000;
+		deflate_init_offset_slot_full(c);
+		break;
+#endif /* SUPPORT_NEAR_OPTIMAL_PARSING */
+	}
+
+	deflate_init_static_codes(c);
+
+	return c;
+}
+
+
+LIBDEFLATEAPI struct libdeflate_compressor *
+libdeflate_alloc_compressor(int compression_level)
+{
+	static const struct libdeflate_options defaults = {
+		.sizeof_options = sizeof(defaults),
+	};
+	return libdeflate_alloc_compressor_ex(compression_level, &defaults);
+}
+
+LIBDEFLATEAPI size_t
+libdeflate_deflate_compress(struct libdeflate_compressor *c,
+			    const void *in, size_t in_nbytes,
+			    void *out, size_t out_nbytes_avail)
+{
+	_compress_block_reset(c);
+	return libdeflate_deflate_compress_block_continue(c,in,0,in_nbytes,0,true,out,out_nbytes_avail,false);
+}
+
+
+static size_t _deflate_flush_to_byte_align(u8* out,size_t out_nbytes_avail,bitbuf_t bitbuf,unsigned bitcount){
+	ASSERT(out<(out+out_nbytes_avail));
+    ASSERT((bitcount>=1)&&(bitcount<=7));
+	STATIC_ASSERT(WORDBITS >= 32);
+	switch (bitcount) {
+		case 1: case 3: case 5: case 7:{
+			return deflate_compress_none(0,0,out,out_nbytes_avail,bitbuf,bitcount,0);
+		} break;
+		case 2:{ // 2,4,6 add static empty blocks
+			if (unlikely(out_nbytes_avail<4)) return 0;
+			bitbuf |= ((2<<20)|(2<<10)|2) <<2;
+			put_unaligned_le32((u32)bitbuf,out);
+			return 4;
+		} break;
+		case 4:{
+			if (unlikely(out_nbytes_avail<3)) return 0;
+			bitbuf |= ((2<<10)|2) <<4;
+			put_unaligned_le16((u16)bitbuf,out);
+			out[2]=(u8)(bitbuf>>16);
+			return 3;
+		} break;
+		case 6:{
+			if (unlikely(out_nbytes_avail<2)) return 0;
+			bitbuf |= 2 <<6;
+			put_unaligned_le16((u16)bitbuf,out);
+			return 2;
+		} break;
+		default:
+			return 0;
+	}
+}
+
+
+
+LIBDEFLATEAPI uint16_t libdeflate_deflate_compress_get_state(struct libdeflate_compressor *c){
+	ASSERT(c->bitcount_back_for_block<=7);
+	ASSERT(c->bitbuf_back_for_block==(uint16_t)(c->bitbuf_back_for_block<<3>>3));
+	return (c->bitbuf_back_for_block<<3) | c->bitcount_back_for_block;
+}
+
+LIBDEFLATEAPI void libdeflate_deflate_compress_set_state(struct libdeflate_compressor *c,uint16_t state){
+	c->bitcount_back_for_block=state&7;
+	c->bitbuf_back_for_block=state>>3;
+}
+
+LIBDEFLATEAPI size_t
+libdeflate_deflate_compress_block_uncompressed(struct libdeflate_compressor *c,
+				const void *in_block,size_t in_nbytes,int in_is_final_block,
+			    void *out, size_t out_nbytes_avail){
+	struct deflate_output_bitstream os;
+	c->in_is_final_block=in_is_final_block?1:0;
+	os.bitbuf = c->bitbuf_back_for_block;
+	os.bitcount = c->bitcount_back_for_block;
+	_compress_block_reset(c);
+	return deflate_compress_none(in_block,in_nbytes,out,out_nbytes_avail,os.bitbuf,os.bitcount,c->in_is_final_block);
+}
+
+LIBDEFLATEAPI size_t
+libdeflate_deflate_compress_block(struct libdeflate_compressor *c,
+			    const void *in_block_with_dict,size_t dict_nbytes,size_t in_nbytes,int in_is_final_block,
+			    void *out, size_t out_nbytes_avail,int out_is_flush_to_byte_align)
+{
+	c->dict_pos_for_blocks_continue=~(size_t)0;
+	return libdeflate_deflate_compress_block_continue(c,in_block_with_dict,dict_nbytes,in_nbytes,0,in_is_final_block,
+				out,out_nbytes_avail,out_is_flush_to_byte_align);
+}
+
+LIBDEFLATEAPI void
+libdeflate_deflate_compress_block_reset(struct libdeflate_compressor *c){
+	_compress_block_reset(c);
+}
+
+LIBDEFLATEAPI size_t
+libdeflate_deflate_compress_block_continue(struct libdeflate_compressor *c,
+			    const void *in_block_with_dict,size_t dict_nbytes,size_t in_nbytes,
+				size_t in_border_nbytes,int in_is_final_block,
+			    void *out, size_t out_nbytes_avail,int out_is_flush_to_byte_align){
+	struct deflate_output_bitstream os;
+	c->in_is_final_block=in_is_final_block?1:0;
+	os.bitbuf = c->bitbuf_back_for_block;
+	os.bitcount = c->bitcount_back_for_block;
+	c->bitbuf_back_for_block=0;
+	c->bitcount_back_for_block=0;
+
+	/*
+	 * For extremely short inputs, or for compression level 0, just output
+	 * uncompressed blocks.
+	 */
+	if (unlikely(in_nbytes <= c->max_passthrough_size)){
+		const u8* in=((const u8*)in_block_with_dict)+dict_nbytes;
+		c->dict_pos_for_blocks_continue=(c->dict_pos_for_blocks_continue==~(size_t)0)?
+				(~(size_t)0) : (c->dict_pos_for_blocks_continue+in_nbytes);
+		c->slide_pos_for_blocks_continue+=in_nbytes;
+		c->dict_pos_for_blocks_continue=(c->slide_pos_for_blocks_continue>MATCHFINDER_WINDOW_SIZE)?
+				(~(size_t)0) : (c->dict_pos_for_blocks_continue);
+		return deflate_compress_none(in,in_nbytes,out,out_nbytes_avail,os.bitbuf,os.bitcount,c->in_is_final_block);
+	}
+
+	if (dict_nbytes>MATCHFINDER_WINDOW_SIZE){
+		in_block_with_dict=(const u8*)in_block_with_dict+dict_nbytes-MATCHFINDER_WINDOW_SIZE;
+		dict_nbytes=MATCHFINDER_WINDOW_SIZE;
+	}
+	
+	/* Initialize the output bitstream structure. */
+	os.next = out;
+	os.end = os.next + out_nbytes_avail;
+	os.overflow = false;
+
+	/* Call the actual compression function. */
+	(*c->impl)(c,in_block_with_dict,dict_nbytes,in_nbytes,in_border_nbytes,&os);
+	c->dict_pos_for_blocks_continue=0;
+
+	/* Return 0 if the output buffer is too small. */
+	if (os.overflow)
+		return 0;
+
+	/*
+	 * Write the final byte if needed.  This can't overflow the output
+	 * buffer because deflate_flush_block() would have set the overflow flag
+	 * if there wasn't enough space remaining for the full final block.
+	 */
+	ASSERT(os.bitcount <= 7);
+	if (os.bitcount) {
+		if (in_is_final_block){
+			ASSERT(os.next < os.end);
+        	*os.next++ = os.bitbuf;
+		}else if (out_is_flush_to_byte_align){
+			size_t fbytes=_deflate_flush_to_byte_align(os.next,os.end-os.next,os.bitbuf,os.bitcount);
+			if (unlikely(fbytes==0)) return 0;
+			os.next+=fbytes;
+		}else{ //backup for next block
+			c->bitbuf_back_for_block=os.bitbuf;
+			c->bitcount_back_for_block=os.bitcount;
+		}
+	}
+
+	/* Return the compressed size in bytes. */
+	return os.next - (u8 *)out;
+}
+
+LIBDEFLATEAPI void
+libdeflate_free_compressor(struct libdeflate_compressor *c)
+{
+	if (c)
+		libdeflate_aligned_free(c->free_func, c);
+}
+
+unsigned int
+libdeflate_get_compression_level(struct libdeflate_compressor *c)
+{
+	return c->compression_level;
+}
+
+LIBDEFLATEAPI size_t
+libdeflate_deflate_compress_bound(struct libdeflate_compressor *c,
+				  size_t in_nbytes)
+{
+	size_t max_blocks;
+
+	/*
+	 * Since the compressor never uses a compressed block when an
+	 * uncompressed block is cheaper, the worst case can be no worse than
+	 * the case where only uncompressed blocks are used.
+	 *
+	 * This is true even though up to 7 bits are "wasted" to byte-align the
+	 * bitstream when a compressed block is followed by an uncompressed
+	 * block.  This is because a compressed block wouldn't have been used if
+	 * it wasn't cheaper than an uncompressed block, and uncompressed blocks
+	 * always end on a byte boundary.  So the alignment bits will, at worst,
+	 * go up to the place where the uncompressed block would have ended.
+	 */
+
+	/*
+	 * Calculate the maximum number of uncompressed blocks that the
+	 * compressor can use for 'in_nbytes' of data.
+	 *
+	 * The minimum length that is passed to deflate_flush_block() is
+	 * MIN_BLOCK_LENGTH bytes, except for the final block if needed.  If
+	 * deflate_flush_block() decides to use an uncompressed block, it
+	 * actually will (in general) output a series of uncompressed blocks in
+	 * order to stay within the UINT16_MAX limit of DEFLATE.  But this can
+	 * be disregarded here as long as '2 * MIN_BLOCK_LENGTH <= UINT16_MAX',
+	 * as in that case this behavior can't result in more blocks than the
+	 * case where deflate_flush_block() is called with min-length inputs.
+	 *
+	 * So the number of uncompressed blocks needed would be bounded by
+	 * DIV_ROUND_UP(in_nbytes, MIN_BLOCK_LENGTH).  However, empty inputs
+	 * need 1 (empty) block, which gives the final expression below.
+	 */
+	STATIC_ASSERT(2 * MIN_BLOCK_LENGTH <= UINT16_MAX);
+	max_blocks = MAX(DIV_ROUND_UP(in_nbytes, MIN_BLOCK_LENGTH), 1);
+
+	/*
+	 * Each uncompressed block has 5 bytes of overhead, for the BFINAL,
+	 * BTYPE, LEN, and NLEN fields.  (For the reason explained earlier, the
+	 * alignment bits at the very start of the block can be disregarded;
+	 * they would otherwise increase the overhead to 6 bytes per block.)
+	 * Therefore, the maximum number of overhead bytes is '5 * max_blocks'.
+	 * To get the final bound, add the number of uncompressed bytes.
+	 */
+	return (5 * max_blocks) + in_nbytes;
+}
+
+
+static forceinline size_t
+_compress_bound_block(size_t _one_block){
+	return libdeflate_deflate_compress_bound(NULL,_one_block)+5;
+}
+
+LIBDEFLATEAPI size_t
+libdeflate_deflate_compress_bound_block(size_t in_block_nbytes){
+	return _compress_bound_block(in_block_nbytes);
+}
+
+LIBDEFLATEAPI uint64_t
+libdeflate_deflate_compress_bound_blocks(uint64_t in_stream_nbytes,size_t in_block_nbytes){
+	uint64_t min_blocks;
+	size_t   last_block_nbytes;
+	ASSERT(in_block_nbytes>0);
+	min_blocks=in_stream_nbytes/in_block_nbytes;
+	last_block_nbytes=in_stream_nbytes-in_block_nbytes*min_blocks;
+	return _compress_bound_block(in_block_nbytes)*min_blocks+_compress_bound_block(last_block_nbytes);
+}