google-api-python-client 2.164.0__py2.py3-none-any.whl → 2.166.0__py2.py3-none-any.whl

googleapiclient/discovery_cache/documents/merchantapi.accounts_v1beta.json

@@ -180,6 +180,31 @@
 "https://www.googleapis.com/auth/content"
 ]
 },
+"getAutomaticImprovements": {
+"description": "Retrieves the automatic improvements of an account.",
+"flatPath": "accounts/v1beta/accounts/{accountsId}/automaticImprovements",
+"httpMethod": "GET",
+"id": "merchantapi.accounts.getAutomaticImprovements",
+"parameterOrder": [
+"name"
+],
+"parameters": {
+"name": {
+"description": "Required. The resource name of the automatic improvements. Format: `accounts/{account}/automaticImprovements`",
+"location": "path",
+"pattern": "^accounts/[^/]+/automaticImprovements$",
+"required": true,
+"type": "string"
+}
+},
+"path": "accounts/v1beta/{+name}",
+"response": {
+"$ref": "AutomaticImprovements"
+},
+"scopes": [
+"https://www.googleapis.com/auth/content"
+]
+},
 "list": {
 "description": "Lists accounts accessible to the calling user and matching the constraints of the request such as page size or filters. This is not just listing the sub-accounts of an MCA, but all accounts the calling user has access to including other MCAs, linked accounts, standalone accounts and so on. If no filter is provided, then it returns all the accounts the user has access to. This method is eventually consistent, meaning changes such as creating, updating an account or a change of relationships between accounts may not show up in the results immediately. Instead, these changes propagate over a short period, after which the updated information can match the associated predicates. That means, that searching by account name might not return a recently changed account even though it satisfies the predicate.",
 "flatPath": "accounts/v1beta/accounts",
@@ -281,6 +306,40 @@
 "scopes": [
 "https://www.googleapis.com/auth/content"
 ]
+},
+"updateAutomaticImprovements": {
+"description": "Updates the automatic improvements of an account.",
+"flatPath": "accounts/v1beta/accounts/{accountsId}/automaticImprovements",
+"httpMethod": "PATCH",
+"id": "merchantapi.accounts.updateAutomaticImprovements",
+"parameterOrder": [
+"name"
+],
+"parameters": {
+"name": {
+"description": "Identifier. The resource name of the automatic improvements. Format: `accounts/{account}/automaticImprovements`.",
+"location": "path",
+"pattern": "^accounts/[^/]+/automaticImprovements$",
+"required": true,
+"type": "string"
+},
+"updateMask": {
+"description": "Required. List of fields being updated. The following fields are supported (in both `snake_case` and `lowerCamelCase`): - `item_updates` - `item_updates.account_level_settings` - `image_improvements` - `image_improvements.account_level_settings` - `shipping_improvements` - `shipping_improvements.allow_shipping_improvements`",
+"format": "google-fieldmask",
+"location": "query",
+"type": "string"
+}
+},
+"path": "accounts/v1beta/{+name}",
+"request": {
+"$ref": "AutomaticImprovements"
+},
+"response": {
+"$ref": "AutomaticImprovements"
+},
+"scopes": [
+"https://www.googleapis.com/auth/content"
+]
 }
 },
 "resources": {
@@ -1417,7 +1476,7 @@
 }
 }
 },
-"revision": "20250301",
+"revision": "20250319",
 "rootUrl": "https://merchantapi.googleapis.com/",
 "schemas": {
 "Accepted": {
@@ -1606,6 +1665,87 @@
 },
 "type": "object"
 },
+"AutomaticImageImprovements": {
+"description": "This improvement will attempt to automatically correct submitted images if they don't meet the [image requirements](https://support.google.com/merchants/answer/6324350), for example, removing overlays. If successful, the image will be replaced and approved. This improvement is only applied to images of disapproved offers. For more information see: [Automatic image improvements](https://support.google.com/merchants/answer/9242973)",
+"id": "AutomaticImageImprovements",
+"properties": {
+"accountImageImprovementsSettings": {
+"$ref": "ImageImprovementsAccountLevelSettings",
+"description": "Optional. Determines how the images should be automatically updated. If this field is not present and provided in the update mask, then the settings will be deleted. If there are no settings for subaccount, they are inherited from aggregator."
+},
+"effectiveAllowAutomaticImageImprovements": {
+"description": "Output only. The effective value of allow_automatic_image_improvements. If account_image_improvements_settings is present, then this value is the same. Otherwise, it represents the inherited value of the parent account. Read-only.",
+"readOnly": true,
+"type": "boolean"
+}
+},
+"type": "object"
+},
+"AutomaticImprovements": {
+"description": "Collection of information related to the [automatic improvements](https://developers.google.com/shopping-content/guides/automatic-improvements) of an account.",
+"id": "AutomaticImprovements",
+"properties": {
+"imageImprovements": {
+"$ref": "AutomaticImageImprovements",
+"description": "This improvement will attempt to automatically correct submitted images if they don't meet the [image requirements](https://support.google.com/merchants/answer/6324350), for example, removing overlays. If successful, the image will be replaced and approved. This improvement is only applied to images of disapproved offers. For more information see: [Automatic image improvements](https://support.google.com/merchants/answer/9242973) This field is only updated (cleared) if provided in the update mask."
+},
+"itemUpdates": {
+"$ref": "AutomaticItemUpdates",
+"description": "Turning on [item updates](https://support.google.com/merchants/answer/3246284) allows Google to automatically update items for you. When item updates are on, Google uses the structured data markup on the website and advanced data extractors to update the price and availability of the items. When the item updates are off, items with mismatched data aren't shown. This field is only updated (cleared) if provided in the update mask."
+},
+"name": {
+"description": "Identifier. The resource name of the automatic improvements. Format: `accounts/{account}/automaticImprovements`.",
+"type": "string"
+},
+"shippingImprovements": {
+"$ref": "AutomaticShippingImprovements",
+"description": "Not available for MCAs [accounts](https://support.google.com/merchants/answer/188487). By turning on [automatic shipping improvements](https://support.google.com/merchants/answer/10027038), you are allowing Google to improve the accuracy of your delivery times shown to shoppers using Google. More accurate delivery times, especially when faster, typically lead to better conversion rates. Google will improve your estimated delivery times based on various factors: * Delivery address of an order * Current handling time and shipping time settings * Estimated weekdays or business days * Parcel tracking data This field is only updated (cleared) if provided in the update mask."
+}
+},
+"type": "object"
+},
+"AutomaticItemUpdates": {
+"description": "Turning on [item updates](https://support.google.com/merchants/answer/3246284) allows Google to automatically update items for you. When item updates are on, Google uses the structured data markup on the website and advanced data extractors to update the price and availability of the items. When the item updates are off, items with mismatched data aren't shown.",
+"id": "AutomaticItemUpdates",
+"properties": {
+"accountItemUpdatesSettings": {
+"$ref": "ItemUpdatesAccountLevelSettings",
+"description": "Optional. Determines which attributes of the items should be automatically updated. If this field is not present and provided in the update mask, then the settings will be deleted. If there are no settings for subaccount, they are inherited from aggregator."
+},
+"effectiveAllowAvailabilityUpdates": {
+"description": "Output only. The effective value of allow_availability_updates. If account_item_updates_settings is present, then this value is the same. Otherwise, it represents the inherited value of the parent account. The default value is true if no settings are present. Read-only.",
+"readOnly": true,
+"type": "boolean"
+},
+"effectiveAllowConditionUpdates": {
+"description": "Output only. The effective value of allow_condition_updates. If account_item_updates_settings is present, then this value is the same. Otherwise, it represents the inherited value of the parent account. The default value is true if no settings are present. Read-only.",
+"readOnly": true,
+"type": "boolean"
+},
+"effectiveAllowPriceUpdates": {
+"description": "Output only. The effective value of allow_price_updates. If account_item_updates_settings is present, then this value is the same. Otherwise, it represents the inherited value of the parent account. The default value is true if no settings are present. Read-only.",
+"readOnly": true,
+"type": "boolean"
+},
+"effectiveAllowStrictAvailabilityUpdates": {
+"description": "Output only. The effective value of allow_strict_availability_updates. If account_item_updates_settings is present, then this value is the same. Otherwise, it represents the inherited value of the parent account. The default value is true if no settings are present. Read-only.",
+"readOnly": true,
+"type": "boolean"
+}
+},
+"type": "object"
+},
+"AutomaticShippingImprovements": {
+"description": "Not available for MCAs [accounts](https://support.google.com/merchants/answer/188487). By turning on [automatic shipping improvements](https://support.google.com/merchants/answer/10027038), you are allowing Google to improve the accuracy of your delivery times shown to shoppers using Google. More accurate delivery times, especially when faster, typically lead to better conversion rates. Google will improve your estimated delivery times based on various factors: * Delivery address of an order * Current handling time and shipping time settings * Estimated weekdays or business days * Parcel tracking data",
+"id": "AutomaticShippingImprovements",
+"properties": {
+"allowShippingImprovements": {
+"description": "Enables automatic shipping improvements.",
+"type": "boolean"
+}
+},
+"type": "object"
+},
 "BusinessDayConfig": {
 "description": "Business days of the warehouse.",
 "id": "BusinessDayConfig",
@@ -2123,6 +2263,17 @@
 },
 "type": "object"
 },
+"ImageImprovementsAccountLevelSettings": {
+"description": "Settings for the Automatic Image Improvements.",
+"id": "ImageImprovementsAccountLevelSettings",
+"properties": {
+"allowAutomaticImageImprovements": {
+"description": "Enables automatic image improvements.",
+"type": "boolean"
+}
+},
+"type": "object"
+},
 "Impact": {
 "description": "The impact of the issue on a region.",
 "id": "Impact",
@@ -2231,6 +2382,29 @@ false
 },
 "type": "object"
 },
+"ItemUpdatesAccountLevelSettings": {
+"description": "Settings for the Automatic Item Updates.",
+"id": "ItemUpdatesAccountLevelSettings",
+"properties": {
+"allowAvailabilityUpdates": {
+"description": "If availability updates are enabled, any previous availability values get overwritten if Google finds an out-of-stock annotation on the offer's page. If additionally `allow_strict_availability_updates` field is set to true, values get overwritten if Google finds an in-stock annotation on the offer\u2019s page.",
+"type": "boolean"
+},
+"allowConditionUpdates": {
+"description": "If condition updates are enabled, Google always updates item condition with the condition detected from the details of your product.",
+"type": "boolean"
+},
+"allowPriceUpdates": {
+"description": "If price updates are enabled, Google always updates the active price with the crawled information.",
+"type": "boolean"
+},
+"allowStrictAvailabilityUpdates": {
+"description": "If `allow_availability_updates` is enabled, items are automatically updated in all your Shopping target countries. By default, availability updates will only be applied to items that are 'out of stock' on your website but 'in stock' on Shopping. Set this to true to also update items that are 'in stock' on your website, but 'out of stock' on Google Shopping. In order for this field to have an effect, you must also set `allow_availability_updates`.",
+"type": "boolean"
+}
+},
+"type": "object"
+},
 "ListAccountIssuesResponse": {
 "description": "Response message for the `ListAccountIssues` method.",
 "id": "ListAccountIssuesResponse",
@@ -2451,7 +2625,7 @@ false
 "type": "array"
 },
 "itemConditions": {
-"description": "The item conditions accepted for returns must not be empty unless the type of return policy is 'noReturns'.",
+"description": "Optional. The item conditions accepted for returns must not be empty unless the type of return policy is 'noReturns'.",
 "items": {
 "enum": [
 "ITEM_CONDITION_UNSPECIFIED",
@@ -2477,7 +2651,7 @@ false
 },
 "policy": {
 "$ref": "Policy",
-"description": "The return policy."
+"description": "Optional. The return policy."
 },
 "processRefundDays": {
 "description": "The field specifies the number of days it takes for merchants to process refunds, field is optional.",
@@ -2486,10 +2660,10 @@ false
 },
 "restockingFee": {
 "$ref": "RestockingFee",
-"description": "The restocking fee that applies to all return reason categories. This would be treated as a free restocking fee if the value is not set."
+"description": "Optional. The restocking fee that applies to all return reason categories. This would be treated as a free restocking fee if the value is not set."
 },
 "returnMethods": {
-"description": "The return methods of how customers can return an item. This value is required to not be empty unless the type of return policy is noReturns.",
+"description": "Optional. The return methods of how customers can return an item. This value is required to not be empty unless the type of return policy is noReturns.",
 "items": {
 "enum": [
 "RETURN_METHOD_UNSPECIFIED",
@@ -2518,7 +2692,7 @@ false
 },
 "returnShippingFee": {
 "$ref": "ReturnShippingFee",
-"description": "The return shipping fee. Should be set only when customer need to download and print the return label."
+"description": "Optional. The return shipping fee. Should be set only when customer need to download and print the return label."
 },
 "seasonalOverrides": {
 "description": "Optional. Overrides to the general policy for orders placed during a specific set of time intervals.",
@@ -2578,18 +2752,18 @@ false
 "type": "object"
 },
 "PostalAddress": {
-"description": "Represents a postal address. For example for postal delivery or payments addresses. Given a postal address, a postal service can deliver items to a premise, P.O. Box or similar. It is not intended to model geographical locations (roads, towns, mountains). In typical usage an address would be created by user input or from importing existing data, depending on the type of process. Advice on address input / editing: - Use an internationalization-ready address widget such as https://github.com/google/libaddressinput) - Users should not be presented with UI elements for input or editing of fields outside countries where that field is used. For more guidance on how to use this schema, see: https://support.google.com/business/answer/6397478",
+"description": "Represents a postal address (for example, for postal delivery or payments addresses). Given a postal address, a postal service can deliver items to a premise, P.O. box or similar. It is not intended to model geographical locations (roads, towns, mountains). In typical usage, an address would be created by user input or from importing existing data, depending on the type of process. Advice on address input or editing: - Use an internationalization-ready address widget such as https://github.com/google/libaddressinput. - Users should not be presented with UI elements for input or editing of fields outside countries where that field is used. For more guidance on how to use this schema, see: https://support.google.com/business/answer/6397478.",
 "id": "PostalAddress",
 "properties": {
 "addressLines": {
-"description": "Unstructured address lines describing the lower levels of an address. Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (For example \"Austin, TX\"), it is important that the line order is clear. The order of address lines should be \"envelope order\" for the country/region of the address. In places where this can vary (For example Japan), address_language is used to make it explicit (For example \"ja\" for large-to-small ordering and \"ja-Latn\" or \"en\" for small-to-large). This way, the most specific line of an address can be selected based on the language. The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved. Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).",
+"description": "Unstructured address lines describing the lower levels of an address. Because values in `address_lines` do not have type information and may sometimes contain multiple values in a single field (for example, \"Austin, TX\"), it is important that the line order is clear. The order of address lines should be \"envelope order\" for the country or region of the address. In places where this can vary (for example, Japan), `address_language` is used to make it explicit (for example, \"ja\" for large-to-small ordering and \"ja-Latn\" or \"en\" for small-to-large). In this way, the most specific line of an address can be selected based on the language. The minimum permitted structural representation of an address consists of a `region_code` with all remaining information placed in the `address_lines`. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved. Creating an address only containing a `region_code` and `address_lines` and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).",
 "items": {
 "type": "string"
 },
 "type": "array"
 },
 "administrativeArea": {
-"description": "Optional. Highest administrative subdivision which is used for postal addresses of a country or region. For example, this can be a state, a province, an oblast, or a prefecture. Specifically, for Spain this is the province and not the autonomous community (For example \"Barcelona\" and not \"Catalonia\"). Many countries don't use an administrative area in postal addresses. For example in Switzerland this should be left unpopulated.",
+"description": "Optional. Highest administrative subdivision which is used for postal addresses of a country or region. For example, this can be a state, a province, an oblast, or a prefecture. For Spain, this is the province and not the autonomous community (for example, \"Barcelona\" and not \"Catalonia\"). Many countries don't use an administrative area in postal addresses. For example, in Switzerland, this should be left unpopulated.",
 "type": "string"
 },
 "languageCode": {
@@ -2597,7 +2771,7 @@ false
 "type": "string"
 },
 "locality": {
-"description": "Optional. Generally refers to the city/town portion of the address. Examples: US city, IT comune, UK post town. In regions of the world where localities are not well defined or do not fit into this structure well, leave locality empty and use address_lines.",
+"description": "Optional. Generally refers to the city or town portion of the address. Examples: US city, IT comune, UK post town. In regions of the world where localities are not well defined or do not fit into this structure well, leave `locality` empty and use `address_lines`.",
 "type": "string"
 },
 "organization": {
@@ -2605,7 +2779,7 @@ false
 "type": "string"
 },
 "postalCode": {
-"description": "Optional. Postal code of the address. Not all countries use or require postal codes to be present, but where they are used, they may trigger additional validation with other parts of the address (For example state/zip validation in the U.S.A.).",
+"description": "Optional. Postal code of the address. Not all countries use or require postal codes to be present, but where they are used, they may trigger additional validation with other parts of the address (for example, state or zip code validation in the United States).",
 "type": "string"
 },
 "recipients": {
@@ -2625,11 +2799,11 @@ false
 "type": "integer"
 },
 "sortingCode": {
-"description": "Optional. Additional, country-specific, sorting code. This is not used in most regions. Where it is used, the value is either a string like \"CEDEX\", optionally followed by a number (For example \"CEDEX 7\"), or just a number alone, representing the \"sector code\" (Jamaica), \"delivery area indicator\" (Malawi) or \"post office indicator\" (For example C\u00f4te d'Ivoire).",
+"description": "Optional. Additional, country-specific, sorting code. This is not used in most regions. Where it is used, the value is either a string like \"CEDEX\", optionally followed by a number (for example, \"CEDEX 7\"), or just a number alone, representing the \"sector code\" (Jamaica), \"delivery area indicator\" (Malawi) or \"post office indicator\" (C\u00f4te d'Ivoire).",
 "type": "string"
 },
 "sublocality": {
-"description": "Optional. Sublocality of the address. For example, this can be neighborhoods, boroughs, districts.",
+"description": "Optional. Sublocality of the address. For example, this can be a neighborhood, borough, or district.",
 "type": "string"
 }
 },
@@ -2798,7 +2972,7 @@ false
 "type": "array"
 },
 "eventTime": {
-"description": "The time at which the event was generated.",
+"description": "The time at which the event was generated. If you want to order the notification messages you receive you should rely on this field not on the order of receiving the notifications.",
 "format": "google-datetime",
 "type": "string"
 },
@@ -3054,11 +3228,7 @@ false
 "SeasonalOverride": {
 "id": "SeasonalOverride",
 "properties": {
-"begin": {
-"$ref": "Date",
-"description": "Required. Defines the date range when this seasonal override applies. Both begin and end are inclusive and should be in date decimal format, example 20250115. The dates of the seasonal overrides should not overlap."
-},
-"end": {
+"endDate": {
 "$ref": "Date",
 "description": "Required. seasonal override end date (inclusive)."
 },
@@ -3066,11 +3236,6 @@ false
 "description": "Required. Display name of this seasonal override in Merchant Center.",
 "type": "string"
 },
-"policy": {
-"$ref": "Policy",
-"deprecated": true,
-"description": "The return policy for the given date range."
-},
 "returnDays": {
 "description": "Number of days (from the delivery date) that the product can be returned.",
 "format": "int32",
@@ -3079,6 +3244,10 @@ false
 "returnUntilDate": {
 "$ref": "Date",
 "description": "Fixed end date until which the product can be returned."
+},
+"startDate": {
+"$ref": "Date",
+"description": "Required. Defines the date range when this seasonal override applies. Both start_date and end_date are inclusive. The dates of the seasonal overrides should not overlap."
 }
 },
 "type": "object"

googleapiclient/discovery_cache/documents/merchantapi.conversions_v1beta.json

@@ -295,7 +295,7 @@
 }
 }
 },
-"revision": "20250301",
+"revision": "20250311",
 "rootUrl": "https://merchantapi.googleapis.com/",
 "schemas": {
 "AttributionSettings": {
@@ -599,7 +599,7 @@ false
 "type": "array"
 },
 "eventTime": {
-"description": "The time at which the event was generated.",
+"description": "The time at which the event was generated. If you want to order the notification messages you receive you should rely on this field not on the order of receiving the notifications.",
 "format": "google-datetime",
 "type": "string"
 },

googleapiclient/discovery_cache/documents/merchantapi.datasources_v1beta.json

@@ -321,7 +321,7 @@
 }
 }
 },
-"revision": "20250301",
+"revision": "20250312",
 "rootUrl": "https://merchantapi.googleapis.com/",
 "schemas": {
 "DataSource": {
@@ -429,6 +429,61 @@
 },
 "type": "object"
 },
+"Destination": {
+"description": "Destinations also known as [Marketing methods](https://support.google.com/merchants/answer/15130232) selections.",
+"id": "Destination",
+"properties": {
+"destination": {
+"description": "[Marketing methods](https://support.google.com/merchants/answer/15130232) (also known as destination) selections.",
+"enum": [
+"DESTINATION_ENUM_UNSPECIFIED",
+"SHOPPING_ADS",
+"DISPLAY_ADS",
+"LOCAL_INVENTORY_ADS",
+"FREE_LISTINGS",
+"FREE_LOCAL_LISTINGS",
+"YOUTUBE_SHOPPING",
+"YOUTUBE_SHOPPING_CHECKOUT",
+"YOUTUBE_AFFILIATE",
+"FREE_VEHICLE_LISTINGS",
+"VEHICLE_ADS",
+"CLOUD_RETAIL",
+"LOCAL_CLOUD_RETAIL"
+],
+"enumDescriptions": [
+"Not specified.",
+"[Shopping ads](https://support.google.com/google-ads/answer/2454022).",
+"[Display ads](https://support.google.com/merchants/answer/6069387).",
+"[Local inventory ads](https://support.google.com/merchants/answer/3057972).",
+"[Free listings](https://support.google.com/merchants/answer/9199328).",
+"[Free local product listings](https://support.google.com/merchants/answer/9825611).",
+"[YouTube Shopping](https://support.google.com/merchants/answer/12362804).",
+"Youtube shopping checkout.",
+"[Youtube Affiliate](https://support.google.com/youtube/answer/13376398).",
+"[Free vehicle listings](https://support.google.com/merchants/answer/11189169).",
+"[Vehicle ads](https://support.google.com/merchants/answer/11189169).",
+"[Cloud retail](https://cloud.google.com/solutions/retail).",
+"[Local cloud retail](https://cloud.google.com/solutions/retail)."
+],
+"type": "string"
+},
+"state": {
+"description": "The state of the destination.",
+"enum": [
+"STATE_UNSPECIFIED",
+"ENABLED",
+"DISABLED"
+],
+"enumDescriptions": [
+"Not specified.",
+"Indicates that the destination is enabled.",
+"Indicates that the destination is disabled."
+],
+"type": "string"
+}
+},
+"type": "object"
+},
 "Empty": {
 "description": "A generic empty message that you can re-use to avoid defining duplicated empty messages in your APIs. A typical example is to use it as the request or the response type of an API method. For instance: service Foo { rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty); }",
 "id": "Empty",
@@ -737,6 +792,13 @@
 "$ref": "DefaultRule",
 "description": "Optional. Default rule management of the data source. If set, the linked data sources will be replaced."
 },
+"destinations": {
+"description": "Optional. A list of destinations describing where products of the data source can be shown. When retrieving the data source, the list contains all the destinations that can be used for the data source, including the ones that are disabled for the data source but enabled for the account. Only destinations that are enabled on the account, for example through program participation, can be enabled on the data source. If unset, during creation, the destinations will be inherited based on the account level program participation. If set, during creation or update, the data source will be set only for the specified destinations. Updating this field requires at least one destination.",
+"items": {
+"$ref": "Destination"
+},
+"type": "array"
+},
 "feedLabel": {
 "description": "Optional. Immutable. The feed label that is specified on the data source level. Must be less than or equal to 20 uppercase letters (A-Z), numbers (0-9), and dashes (-). See also [migration to feed labels](https://developers.google.com/shopping-content/guides/products/feed-labels). `feedLabel` and `contentLanguage` must be either both set or unset for data sources with product content type. They must be set for data sources with a file input. If set, the data source will only accept products matching this combination. If unset, the data source will accept products without that restriction.",
 "type": "string"
@@ -864,7 +926,7 @@ false
 "type": "array"
 },
 "eventTime": {
-"description": "The time at which the event was generated.",
+"description": "The time at which the event was generated. If you want to order the notification messages you receive you should rely on this field not on the order of receiving the notifications.",
 "format": "google-datetime",
 "type": "string"
 },

googleapiclient/discovery_cache/documents/merchantapi.inventories_v1beta.json

@@ -300,7 +300,7 @@
 }
 }
 },
-"revision": "20250301",
+"revision": "20250311",
 "rootUrl": "https://merchantapi.googleapis.com/",
 "schemas": {
 "CustomAttribute": {
@@ -576,7 +576,7 @@ false
 "type": "array"
 },
 "eventTime": {
-"description": "The time at which the event was generated.",
+"description": "The time at which the event was generated. If you want to order the notification messages you receive you should rely on this field not on the order of receiving the notifications.",
 "format": "google-datetime",
 "type": "string"
 },

googleapiclient/discovery_cache/documents/merchantapi.lfp_v1beta.json

@@ -298,7 +298,7 @@
 }
 }
 },
-"revision": "20250301",
+"revision": "20250311",
 "rootUrl": "https://merchantapi.googleapis.com/",
 "schemas": {
 "Empty": {
@@ -650,7 +650,7 @@ false
 "type": "array"
 },
 "eventTime": {
-"description": "The time at which the event was generated.",
+"description": "The time at which the event was generated. If you want to order the notification messages you receive you should rely on this field not on the order of receiving the notifications.",
 "format": "google-datetime",
 "type": "string"
 },

googleapiclient/discovery_cache/documents/merchantapi.notifications_v1beta.json

@@ -262,7 +262,7 @@
 }
 }
 },
-"revision": "20250301",
+"revision": "20250311",
 "rootUrl": "https://merchantapi.googleapis.com/",
 "schemas": {
 "Empty": {
@@ -439,7 +439,7 @@ false
 "type": "array"
 },
 "eventTime": {
-"description": "The time at which the event was generated.",
+"description": "The time at which the event was generated. If you want to order the notification messages you receive you should rely on this field not on the order of receiving the notifications.",
 "format": "google-datetime",
 "type": "string"
 },

googleapiclient/discovery_cache/documents/merchantapi.products_v1beta.json

@@ -171,6 +171,45 @@
 "scopes": [
 "https://www.googleapis.com/auth/content"
 ]
+},
+"patch": {
+"description": "Updates the existing product input in your Merchant Center account. After inserting, updating, or deleting a product input, it may take several minutes before the processed product can be retrieved.",
+"flatPath": "products/v1beta/accounts/{accountsId}/productInputs/{productInputsId}",
+"httpMethod": "PATCH",
+"id": "merchantapi.accounts.productInputs.patch",
+"parameterOrder": [
+"name"
+],
+"parameters": {
+"dataSource": {
+"description": "Required. The primary or supplemental product data source where `data_source` name identifies the product input to be updated. Only API data sources are supported. Format: `accounts/{account}/dataSources/{datasource}`.",
+"location": "query",
+"type": "string"
+},
+"name": {
+"description": "Identifier. The name of the product input. Format: `\"{productinput.name=accounts/{account}/productInputs/{productinput}}\"` where the last section `productinput` consists of 4 parts: channel~content_language~feed_label~offer_id example for product input name is \"accounts/123/productInputs/online~en~US~sku123\"",
+"location": "path",
+"pattern": "^accounts/[^/]+/productInputs/[^/]+$",
+"required": true,
+"type": "string"
+},
+"updateMask": {
+"description": "Optional. The list of product attributes to be updated. If the update mask is omitted, then it is treated as implied field mask equivalent to all fields that are populated (have a non-empty value). Attributes specified in the update mask without a value specified in the body will be deleted from the product. Update mask can only be specified for top level fields in attributes and custom attributes. To specify the update mask for custom attributes you need to add the `custom_attribute.` prefix. Providing special \"*\" value for full product replacement is not supported.",
+"format": "google-fieldmask",
+"location": "query",
+"type": "string"
+}
+},
+"path": "products/v1beta/{+name}",
+"request": {
+"$ref": "ProductInput"
+},
+"response": {
+"$ref": "ProductInput"
+},
+"scopes": [
+"https://www.googleapis.com/auth/content"
+]
 }
 }
 },
@@ -242,7 +281,7 @@
 }
 }
 },
-"revision": "20250301",
+"revision": "20250317",
 "rootUrl": "https://merchantapi.googleapis.com/",
 "schemas": {
 "Attributes": {
@@ -1471,7 +1510,7 @@ false
 "type": "array"
 },
 "eventTime": {
-"description": "The time at which the event was generated.",
+"description": "The time at which the event was generated. If you want to order the notification messages you receive you should rely on this field not on the order of receiving the notifications.",
 "format": "google-datetime",
 "type": "string"
 },

googleapiclient/discovery_cache/documents/merchantapi.promotions_v1beta.json

@@ -203,7 +203,7 @@
 }
 }
 },
-"revision": "20250301",
+"revision": "20250311",
 "rootUrl": "https://merchantapi.googleapis.com/",
 "schemas": {
 "Attributes": {
@@ -890,7 +890,7 @@ false
 "type": "array"
 },
 "eventTime": {
-"description": "The time at which the event was generated.",
+"description": "The time at which the event was generated. If you want to order the notification messages you receive you should rely on this field not on the order of receiving the notifications.",
 "format": "google-datetime",
 "type": "string"
 },

googleapiclient/discovery_cache/documents/merchantapi.quota_v1beta.json

@@ -150,7 +150,7 @@
 }
 }
 },
-"revision": "20250301",
+"revision": "20250311",
 "rootUrl": "https://merchantapi.googleapis.com/",
 "schemas": {
 "ListQuotaGroupsResponse": {
@@ -312,7 +312,7 @@ false
 "type": "array"
 },
 "eventTime": {
-"description": "The time at which the event was generated.",
+"description": "The time at which the event was generated. If you want to order the notification messages you receive you should rely on this field not on the order of receiving the notifications.",
 "format": "google-datetime",
 "type": "string"
 },

googleapiclient/discovery_cache/documents/merchantapi.reports_v1beta.json

@@ -142,7 +142,7 @@
 }
 }
 },
-"revision": "20250301",
+"revision": "20250311",
 "rootUrl": "https://merchantapi.googleapis.com/",
 "schemas": {
 "BestSellersBrandView": {
@@ -1250,7 +1250,7 @@ false
 "type": "array"
 },
 "eventTime": {
-"description": "The time at which the event was generated.",
+"description": "The time at which the event was generated. If you want to order the notification messages you receive you should rely on this field not on the order of receiving the notifications.",
 "format": "google-datetime",
 "type": "string"
 },