goodwe 0.3.4__py3-none-any.whl → 0.3.6__py3-none-any.whl

goodwe/dt.py

@@ -110,6 +110,10 @@ class DT(Inverter):
         Integer("shadow_scan", 40326, "Shadow Scan", "", Kind.PV),
         Integer("grid_export", 40327, "Grid Export Enabled", "", Kind.GRID),
         Integer("grid_export_limit", 40328, "Grid Export Limit", "%", Kind.GRID),
+        Integer("start", 40330, "Start / Power On", "", Kind.GRID),
+        Integer("stop", 40331, "Stop / Power Off", "", Kind.GRID),
+        Integer("restart", 40332, "Restart", "", Kind.GRID),
+        Integer("grid_export_hw", 40345, "Grid Export Enabled (HW)", "", Kind.GRID),
     )
 
     # Settings for single phase inverters

goodwe/es.py

@@ -178,11 +178,11 @@ class ES(Inverter):
     def _supports_eco_mode_v2(self) -> bool:
         if self.arm_version < 14:
             return False
-        if "EMU" in self.serial_number:
+        if "EMU" in self.serial_number or "EMJ" in self.serial_number:
             return self.dsp1_version >= 11
-        if "ESU" in self.serial_number:
+        if "ESU" in self.serial_number or "ESA" in self.serial_number:
             return self.dsp1_version >= 22
-        if "BPS" in self.serial_number:
+        if "BPS" in self.serial_number or "BPU" in self.serial_number:
             return self.dsp1_version >= 10
         return False
 
@@ -192,7 +192,7 @@ class ES(Inverter):
         self.firmware = self._decode(response[0:5]).rstrip()
         self.model_name = self._decode(response[5:15]).rstrip()
         self.serial_number = self._decode(response[31:47])
-        self.software_version = self._decode(response[51:63])
+        self.arm_firmware = self._decode(response[51:63])  # AKA software_version
         try:
             if len(self.firmware) >= 2:
                 self.dsp1_version = int(self.firmware[0:2])
@@ -250,10 +250,9 @@ class ES(Inverter):
             # modbus can address/store only 16 bit values, read the other 8 bytes
             if self._is_modbus_setting(setting):
                 response = await self._read_from_socket(ModbusReadCommand(self.comm_addr, setting.offset, 1))
-                raw_value = setting.encode_value(value, response.response_data()[0:2])
             else:
                 response = await self._read_from_socket(Aa55ReadCommand(setting.offset, 1))
-                raw_value = setting.encode_value(value, response.response_data()[2:4])
+            raw_value = setting.encode_value(value, response.response_data()[0:2])
         else:
             raw_value = setting.encode_value(value)
         if len(raw_value) <= 2:

goodwe/et.py

@@ -3,7 +3,7 @@ from __future__ import annotations
 import logging
 from typing import Tuple
 
-from .exceptions import RequestRejectedException
+from .exceptions import RequestFailedException, RequestRejectedException
 from .inverter import Inverter
 from .inverter import OperationMode
 from .inverter import SensorKind as Kind
@@ -252,7 +252,8 @@ class ET(Inverter):
         Apparent4("meter_apparent_power_total", 36041, "Meter Apparent Power Total", Kind.GRID),
         Integer("meter_type", 36043, "Meter Type", "", Kind.GRID),  # (0: Single phase, 1: 3P3W, 2: 3P4W, 3: HomeKit)
         Integer("meter_sw_version", 36044, "Meter Software Version", "", Kind.GRID),
-        # Sensors added in some ARM fw update, read when flag _has_meter_extended is on
+
+        # Sensors added in some ARM fw update (or platform 745/753), read when flag _has_meter_extended is on
         Power4S("meter2_active_power", 36045, "Meter 2 Active Power", Kind.GRID),
         Float("meter2_e_total_exp", 36047, 1000, "Meter 2 Total Energy (export)", "kWh", Kind.GRID),
         Float("meter2_e_total_imp", 36049, 1000, "Meter 2 Total Energy (import)", "kWh", Kind.GRID),
@@ -263,6 +264,15 @@ class ET(Inverter):
         Current("meter_current1", 36055, "Meter L1 Current", Kind.GRID),
         Current("meter_current2", 36056, "Meter L2 Current", Kind.GRID),
         Current("meter_current3", 36057, "Meter L3 Current", Kind.GRID),
+
+        Energy8("meter_e_total_exp1", 36092, "Meter Total Energy (export) L1", Kind.GRID),
+        Energy8("meter_e_total_exp2", 36096, "Meter Total Energy (export) L2", Kind.GRID),
+        Energy8("meter_e_total_exp3", 36100, "Meter Total Energy (export) L3", Kind.GRID),
+        Energy8("meter_e_total_exp", 36104, "Meter Total Energy (export)", Kind.GRID),
+        Energy8("meter_e_total_imp1", 36108, "Meter Total Energy (import) L1", Kind.GRID),
+        Energy8("meter_e_total_imp2", 36112, "Meter Total Energy (import) L2", Kind.GRID),
+        Energy8("meter_e_total_imp3", 36116, "Meter Total Energy (import) L3", Kind.GRID),
+        Energy8("meter_e_total_imp", 36120, "Meter Total Energy (import)", Kind.GRID),
     )
 
     # Inverter's MPPT data
@@ -414,6 +424,7 @@ class ET(Inverter):
         self._READ_RUNNING_DATA: ProtocolCommand = ModbusReadCommand(self.comm_addr, 0x891c, 0x007d)
         self._READ_METER_DATA: ProtocolCommand = ModbusReadCommand(self.comm_addr, 0x8ca0, 0x2d)
         self._READ_METER_DATA_EXTENDED: ProtocolCommand = ModbusReadCommand(self.comm_addr, 0x8ca0, 0x3a)
+        self._READ_METER_DATA_EXTENDED2: ProtocolCommand = ModbusReadCommand(self.comm_addr, 0x8ca0, 0x7d)
         self._READ_BATTERY_INFO: ProtocolCommand = ModbusReadCommand(self.comm_addr, 0x9088, 0x0018)
         self._READ_BATTERY2_INFO: ProtocolCommand = ModbusReadCommand(self.comm_addr, 0x9858, 0x0016)
         self._READ_MPPT_DATA: ProtocolCommand = ModbusReadCommand(self.comm_addr, 0x89e5, 0x3d)
@@ -422,6 +433,7 @@ class ET(Inverter):
         self._has_battery: bool = True
         self._has_battery2: bool = False
         self._has_meter_extended: bool = False
+        self._has_meter_extended2: bool = False
         self._has_mppt: bool = False
         self._sensors = self.__all_sensors
         self._sensors_battery = self.__all_sensors_battery
@@ -440,6 +452,11 @@ class ET(Inverter):
         """Filter to exclude extended meter sensors"""
         return s.offset < 36045
 
+    @staticmethod
+    def _not_extended_meter2(s: Sensor) -> bool:
+        """Filter to exclude extended meter sensors"""
+        return s.offset < 36058
+
     async def read_device_info(self):
         response = await self._read_from_socket(self._READ_DEVICE_VERSION_INFO)
         response = response.response_data()
@@ -470,9 +487,10 @@ class ET(Inverter):
         if is_2_battery(self) or self.rated_power >= 25000:
             self._has_battery2 = True
 
-        if self.rated_power >= 15000:
+        if is_745_platform(self) or self.rated_power >= 15000:
             self._has_mppt = True
             self._has_meter_extended = True
+            self._has_meter_extended2 = True
         else:
             self._sensors_meter = tuple(filter(self._not_extended_meter, self._sensors_meter))
 
@@ -482,8 +500,11 @@ class ET(Inverter):
             self._settings.update({s.id_: s for s in self.__settings_arm_fw_19})
         except RequestRejectedException as ex:
             if ex.message == 'ILLEGAL DATA ADDRESS':
-                logger.debug("Cannot read EcoModeV2 settings, using to EcoModeV1.")
+                logger.debug("EcoModeV2 settings not supported, switching to EcoModeV1.")
                 self._has_eco_mode_v2 = False
+        except RequestFailedException as ex:
+            logger.debug("Cannot read EcoModeV2 settings, switching to EcoModeV1.")
+            self._has_eco_mode_v2 = False
 
         # Check and add Peak Shaving settings added in (ETU fw 22)
         try:
@@ -491,8 +512,11 @@ class ET(Inverter):
             self._settings.update({s.id_: s for s in self.__settings_arm_fw_22})
         except RequestRejectedException as ex:
             if ex.message == 'ILLEGAL DATA ADDRESS':
-                logger.debug("Cannot read PeakShaving setting, disabling it.")
+                logger.debug("PeakShaving setting not supported, disabling it.")
                 self._has_peak_shaving = False
+        except RequestFailedException as ex:
+            logger.debug("Cannot read _has_peak_shaving settings, disabling it.")
+            self._has_peak_shaving = False
 
     async def read_runtime_data(self) -> Dict[str, Any]:
         response = await self._read_from_socket(self._READ_RUNNING_DATA)
@@ -505,7 +529,7 @@ class ET(Inverter):
                 data.update(self._map_response(response, self._sensors_battery))
             except RequestRejectedException as ex:
                 if ex.message == 'ILLEGAL DATA ADDRESS':
-                    logger.warning("Cannot read battery values, disabling further attempts.")
+                    logger.warning("Battery values not supported, disabling further attempts.")
                     self._has_battery = False
                 else:
                     raise ex
@@ -516,18 +540,32 @@ class ET(Inverter):
                     self._map_response(response, self._sensors_battery2))
             except RequestRejectedException as ex:
                 if ex.message == 'ILLEGAL DATA ADDRESS':
-                    logger.warning("Cannot read battery 2 values, disabling further attempts.")
+                    logger.warning("Battery 2 values not supported, disabling further attempts.")
                     self._has_battery2 = False
                 else:
                     raise ex
 
-        if self._has_meter_extended:
+        if self._has_meter_extended2:
+            try:
+                response = await self._read_from_socket(self._READ_METER_DATA_EXTENDED2)
+                data.update(self._map_response(response, self._sensors_meter))
+            except RequestRejectedException as ex:
+                if ex.message == 'ILLEGAL DATA ADDRESS':
+                    logger.info("Extended meter values not supported, disabling further attempts.")
+                    self._has_meter_extended2 = False
+                    self._sensors_meter = tuple(filter(self._not_extended_meter2, self._sensors_meter))
+                    response = await self._read_from_socket(self._READ_METER_DATA_EXTENDED)
+                    data.update(
+                        self._map_response(response, self._sensors_meter))
+                else:
+                    raise ex
+        elif self._has_meter_extended:
             try:
                 response = await self._read_from_socket(self._READ_METER_DATA_EXTENDED)
                 data.update(self._map_response(response, self._sensors_meter))
             except RequestRejectedException as ex:
                 if ex.message == 'ILLEGAL DATA ADDRESS':
-                    logger.warning("Cannot read extended meter values, disabling further attempts.")
+                    logger.warning("Extended meter values not supported, disabling further attempts.")
                     self._has_meter_extended = False
                     self._sensors_meter = tuple(filter(self._not_extended_meter, self._sensors_meter))
                     response = await self._read_from_socket(self._READ_METER_DATA)
@@ -545,7 +583,7 @@ class ET(Inverter):
                 data.update(self._map_response(response, self._sensors_mppt))
             except RequestRejectedException as ex:
                 if ex.message == 'ILLEGAL DATA ADDRESS':
-                    logger.warning("Cannot read MPPT values, disabling further attempts.")
+                    logger.warning("MPPT values not supported, disabling further attempts.")
                     self._has_mppt = False
                 else:
                     raise ex

goodwe/model.py

@@ -48,3 +48,7 @@ def is_2_battery(inverter: Inverter) -> bool:
 def is_745_platform(inverter: Inverter) -> bool:
     return any(model in inverter.serial_number for model in PLATFORM_745_LV_MODELS) or any(
         model in inverter.serial_number for model in PLATFORM_745_HV_MODELS)
+
+
+def is_753_platform(inverter: Inverter) -> bool:
+    return any(model in inverter.serial_number for model in PLATFORM_753_MODELS)

goodwe/sensor.py

@@ -183,7 +183,7 @@ class Energy(Sensor):
 
     def read_value(self, data: ProtocolResponse):
         value = read_bytes2(data)
-        return float(value) / 10 if value else None
+        return float(value) / 10 if value is not None else None
 
 
 class Energy4(Sensor):
@@ -194,7 +194,18 @@ class Energy4(Sensor):
 
     def read_value(self, data: ProtocolResponse):
         value = read_bytes4(data)
-        return float(value) / 10 if value else None
+        return float(value) / 10 if value is not None else None
+
+
+class Energy8(Sensor):
+    """Sensor representing energy [kWh] value encoded in 8 bytes"""
+
+    def __init__(self, id_: str, offset: int, name: str, kind: Optional[SensorKind]):
+        super().__init__(id_, offset, name, 8, "kWh", kind)
+
+    def read_value(self, data: ProtocolResponse):
+        value = read_bytes8(data)
+        return float(value) / 100 if value is not None else None
 
 
 class Apparent(Sensor):
@@ -816,6 +827,14 @@ def read_bytes4_signed(buffer: ProtocolResponse, offset: int = None) -> int:
     return int.from_bytes(buffer.read(4), byteorder="big", signed=True)
 
 
+def read_bytes8(buffer: ProtocolResponse, offset: int = None, undef: int = None) -> int:
+    """Retrieve 8 byte (unsigned int) value from buffer"""
+    if offset is not None:
+        buffer.seek(offset)
+    value = int.from_bytes(buffer.read(8), byteorder="big", signed=False)
+    return undef if value == 0xffffffffffffffff else value
+
+
 def read_decimal2(buffer: ProtocolResponse, scale: int, offset: int = None) -> float:
     """Retrieve 2 byte (signed float) value from buffer"""
     if offset is not None:

{goodwe-0.3.4.dist-info → goodwe-0.3.6.dist-info}/METADATA

@@ -1,6 +1,6 @@
 Metadata-Version: 2.1
 Name: goodwe
-Version: 0.3.4
+Version: 0.3.6
 Summary: Read data from GoodWe inverter via local network
 Home-page: https://github.com/marcelblijleven/goodwe
 Author: Martin Letenay, Marcel Blijleven

goodwe-0.3.6.dist-info/RECORD

@@ -0,0 +1,16 @@
+goodwe/__init__.py,sha256=PInrrZEpTmMOQKk494vIz8EKSaw_qLBNz-6t9eLIUcg,5642
+goodwe/const.py,sha256=Nw-nd4UJuqUOLfbmOrxTHEdS1AuaTDSpZzQqR6tBb8w,7912
+goodwe/dt.py,sha256=0nwEAaRstwyZpeDAoSIq4spETXD77ctoGWEnuyezm_E,10862
+goodwe/es.py,sha256=ej4vBgXI2dGarbO3rle2itMukmY85_8as6Wsab_6ms8,22672
+goodwe/et.py,sha256=perDcodUdVBmn6bRhHfYgdFihjDwuNE5DyaiTU0adgw,42050
+goodwe/exceptions.py,sha256=I6PHG0GTWgxNrDVZwJZBnyzItRq5eiM6ci23-EEsn1I,1012
+goodwe/inverter.py,sha256=7DgIzSHimkVAfNyIkzALeukHOHkOuYjVyUIvuT0LHdE,10342
+goodwe/modbus.py,sha256=ZPib-zKnOVE5zc0RNnhlf0w_26QBees1ScWGo6bAj0o,4685
+goodwe/model.py,sha256=OAKfw6ggClgLR9JIdNd7tQ4pnh_7o_UqVdm1KOVsm-Y,2200
+goodwe/protocol.py,sha256=pUkXTP2DqpKXGO7rbRfHq1x82Y1QM6OiRVx8cAtS0sM,13162
+goodwe/sensor.py,sha256=P3-FeiaxVmzxY0UTpa-Mhlt5ZC9rUdNjjTu3EpYz9BE,37742
+goodwe-0.3.6.dist-info/LICENSE,sha256=aZAhk3lRdYT1YZV-IKRHISEcc_KNUmgfuNO3QhRamNM,1073
+goodwe-0.3.6.dist-info/METADATA,sha256=Ahjq6cttZ-9ouqlgsx7b-XPo_kIzQVt9TNdATXjCCyg,3050
+goodwe-0.3.6.dist-info/WHEEL,sha256=GJ7t_kWBFywbagK5eo9IoUwLW6oyOeTKmQ-9iHFVNxQ,92
+goodwe-0.3.6.dist-info/top_level.txt,sha256=kKoiqiVvAxDaDJYMZZQLgHQj9cuWT1MXLfXElTDuf8s,7
+goodwe-0.3.6.dist-info/RECORD,,

goodwe-0.3.4.dist-info/RECORD

@@ -1,16 +0,0 @@
-goodwe/__init__.py,sha256=PInrrZEpTmMOQKk494vIz8EKSaw_qLBNz-6t9eLIUcg,5642
-goodwe/const.py,sha256=Nw-nd4UJuqUOLfbmOrxTHEdS1AuaTDSpZzQqR6tBb8w,7912
-goodwe/dt.py,sha256=bI53MVdZjtxTYU2qJLO8icsvF6UiXrkgH95V3iUwXT0,10581
-goodwe/es.py,sha256=XBP7txg9d4tMsFmHWs8LB4wdJmspKVD9ALfS9mePiJk,22650
-goodwe/et.py,sha256=Ru227kF66U1P9R-9NvKyadeSCg_9va5nBrVYSMYrIhQ,39703
-goodwe/exceptions.py,sha256=I6PHG0GTWgxNrDVZwJZBnyzItRq5eiM6ci23-EEsn1I,1012
-goodwe/inverter.py,sha256=7DgIzSHimkVAfNyIkzALeukHOHkOuYjVyUIvuT0LHdE,10342
-goodwe/modbus.py,sha256=ZPib-zKnOVE5zc0RNnhlf0w_26QBees1ScWGo6bAj0o,4685
-goodwe/model.py,sha256=dWBjMFJMnhZoUdDd9fGT54DERDANz4TirK0Wy8kWMbk,2068
-goodwe/protocol.py,sha256=pUkXTP2DqpKXGO7rbRfHq1x82Y1QM6OiRVx8cAtS0sM,13162
-goodwe/sensor.py,sha256=vFbsz4Dp0yw0rBNdKqzkMUupuBJWC17YcxvBrjvFAjU,36990
-goodwe-0.3.4.dist-info/LICENSE,sha256=aZAhk3lRdYT1YZV-IKRHISEcc_KNUmgfuNO3QhRamNM,1073
-goodwe-0.3.4.dist-info/METADATA,sha256=pdVfstdVhotsFouFM6MknkbJaWr6YmgQ81kHSoJa3tw,3050
-goodwe-0.3.4.dist-info/WHEEL,sha256=GJ7t_kWBFywbagK5eo9IoUwLW6oyOeTKmQ-9iHFVNxQ,92
-goodwe-0.3.4.dist-info/top_level.txt,sha256=kKoiqiVvAxDaDJYMZZQLgHQj9cuWT1MXLfXElTDuf8s,7
-goodwe-0.3.4.dist-info/RECORD,,