geonode-pycsw 3.0.0b2__py3-none-any.whl

pycsw/plugins/profiles/apiso/schemas/ogc/iso/19139/20060504/gml/units.xsd

@@ -0,0 +1,156 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<schema targetNamespace="http://www.opengis.net/gml" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:gml="http://www.opengis.net/gml" elementFormDefault="qualified" version="3.2.0" xml:lang="en">
+	<annotation>
+		<appinfo source="urn:ogc:specification:gml:schema-xsd:units:3.2.0">units.xsd</appinfo>
+		<documentation>See ISO/DIS 17.2.
+Several GML Schema components concern or require a reference scale or units of measure.  Units are required for quantities that may occur as values of properties of feature types, as the results of observations, in the range parameters of a coverage, and for measures used in Coordinate Reference System definitions. 
+The basic unit definition is an extension of the general gml:Definition element defined in 16.2.1.  Three specialized elements for unit definition are further derived from this. 
+This model is based on the SI system of units [ISO 1000], which distinguishes between Base Units and Derived Units.  
+-	Base Units are the preferred units for a set of orthogonal fundamental quantities which define the particular system of units, which may not be derived by combination of other base units.  
+-	Derived Units are the preferred units for other quantities in the system, which may be defined by algebraic combination of the base units.  
+In some application areas Conventional units are used, which may be converted to the preferred units using a scaling factor or a formula which defines a re-scaling and offset.  The set of preferred units for all physical quantity types in a particular system of units is composed of the union of its base units and derived units.  
+Unit definitions are substitutable for the gml:Definition element declared as part of the dictionary model.  A dictionary that contains only unit definitions and references to unit definitions is a units dictionary.  </documentation>
+	</annotation>
+	<include schemaLocation="dictionary.xsd"/>
+	<element name="unitOfMeasure" type="gml:UnitOfMeasureType">
+		<annotation>
+			<documentation>The element gml:unitOfMeasure is a property element to refer to a unit of measure. This is an empty element which carries a reference to a unit of measure definition.</documentation>
+		</annotation>
+	</element>
+	<complexType name="UnitOfMeasureType">
+		<sequence/>
+		<attribute name="uom" type="gml:UomIdentifier" use="required"/>
+	</complexType>
+	<element name="UnitDefinition" type="gml:UnitDefinitionType" substitutionGroup="gml:Definition">
+		<annotation>
+			<documentation>A gml:UnitDefinition is a general definition of a unit of measure. This generic element is used only for units for which no relationship with other units or units systems is known.
+The content model of gml:UnitDefinition adds three additional properties to gml:Definition, gml:quantityType, gml:quantityTypeReference and gml:catalogSymbol.  
+The gml:catalogSymbol property optionally gives the short symbol used for this unit. This element is usually used when the relationship of this unit to other units or units systems is unknown.</documentation>
+		</annotation>
+	</element>
+	<complexType name="UnitDefinitionType">
+		<complexContent>
+			<extension base="gml:DefinitionType">
+				<sequence>
+					<element ref="gml:quantityType" minOccurs="0"/>
+					<element ref="gml:quantityTypeReference" minOccurs="0"/>
+					<element ref="gml:catalogSymbol" minOccurs="0"/>
+				</sequence>
+			</extension>
+		</complexContent>
+	</complexType>
+	<element name="quantityType" type="gml:StringOrRefType">
+		<annotation>
+			<documentation>The gml:quantityType property indicates the phenomenon to which the units apply. This element contains an informal description of the phenomenon or type of physical quantity that is measured or observed. When the physical quantity is the result of an observation or measurement, this term is known as observable type or measurand.
+The use of gml:quantityType for references to remote values is deprecated.</documentation>
+		</annotation>
+	</element>
+	<element name="quantityTypeReference" type="gml:ReferenceType">
+		<annotation>
+			<documentation>The gml:quantityTypeReference property indicates the phenomenon to which the units apply. The content is a reference to a remote value.</documentation>
+		</annotation>
+	</element>
+	<element name="catalogSymbol" type="gml:CodeType">
+		<annotation>
+			<documentation>The catalogSymbol is the preferred lexical symbol used for this unit of measure.
+The codeSpace attribute in gml:CodeType identifies a namespace for the catalog symbol value, and might reference the external catalog. The string value in gml:CodeType contains the value of a symbol that should be unique within this catalog namespace. This symbol often appears explicitly in the catalog, but it could be a combination of symbols using a specified algebra of units.</documentation>
+		</annotation>
+	</element>
+	<element name="BaseUnit" type="gml:BaseUnitType" substitutionGroup="gml:UnitDefinition">
+		<annotation>
+			<documentation>A base unit is a unit of measure that cannot be derived by combination of other base units within a particular system of units.  For example, in the SI system of units, the base units are metre, kilogram, second, Ampere, Kelvin, mole, and candela, for the physical quantity types length, mass, time interval, electric current, thermodynamic temperature, amount of substance and luminous intensity, respectively.
+gml:BaseUnit extends generic gml:UnitDefinition with the property gml:unitsSystem, which carries a reference to the units system to which this base unit is asserted to belong.  </documentation>
+		</annotation>
+	</element>
+	<complexType name="BaseUnitType">
+		<complexContent>
+			<extension base="gml:UnitDefinitionType">
+				<sequence>
+					<element name="unitsSystem" type="gml:ReferenceType"/>
+				</sequence>
+			</extension>
+		</complexContent>
+	</complexType>
+	<element name="DerivedUnit" type="gml:DerivedUnitType" substitutionGroup="gml:UnitDefinition">
+		<annotation>
+			<documentation>Derived units are defined by combination of other units.  Derived units are used for quantities other than those corresponding to the base units, such as hertz (s-1) for frequency, Newton (kg.m/s2) for force.  Derived units based directly on base units are usually preferred for quantities other than the fundamental quantities within a system. If a derived unit is not the preferred unit, the gml:ConventionalUnit element should be used instead.
+The gml:DerivedUnit extends gml:UnitDefinition with the property gml:derivationUnitTerms.</documentation>
+		</annotation>
+	</element>
+	<complexType name="DerivedUnitType">
+		<complexContent>
+			<extension base="gml:UnitDefinitionType">
+				<sequence>
+					<element ref="gml:derivationUnitTerm" maxOccurs="unbounded"/>
+				</sequence>
+			</extension>
+		</complexContent>
+	</complexType>
+	<element name="derivationUnitTerm" type="gml:DerivationUnitTermType">
+		<annotation>
+			<documentation>A set of gml:derivationUnitTerm elements describes a derived unit of measure.  Each element carries an integer exponent.  The terms are combined by raising each referenced unit to the power of its exponent and forming the product.
+This unit term references another unit of measure (uom) and provides an integer exponent applied to that unit in defining the compound unit. The exponent may be positive or negative, but not zero.</documentation>
+		</annotation>
+	</element>
+	<complexType name="DerivationUnitTermType">
+		<complexContent>
+			<extension base="gml:UnitOfMeasureType">
+				<attribute name="exponent" type="integer"/>
+			</extension>
+		</complexContent>
+	</complexType>
+	<element name="ConventionalUnit" type="gml:ConventionalUnitType" substitutionGroup="gml:UnitDefinition">
+		<annotation>
+			<documentation>Conventional units that are neither base units nor defined by direct combination of base units are used in many application domains.  For example electronVolt for energy, feet and nautical miles for length.  In most cases there is a known, usually linear, conversion to a preferred unit which is either a base unit or derived by direct combination of base units.
+The gml:ConventionalUnit extends gml:UnitDefinition with a property that describes a conversion to a preferred unit for this physical quantity.  When the conversion is exact, the element gml:conversionToPreferredUnit should be used, or when the conversion is not exact the element gml:roughConversionToPreferredUnit is available. Both of these elements have the same content model.  The gml:derivationUnitTerm property defined above is included to allow a user to optionally record how this unit may be derived from other (“more primitive”) units.</documentation>
+		</annotation>
+	</element>
+	<complexType name="ConventionalUnitType">
+		<complexContent>
+			<extension base="gml:UnitDefinitionType">
+				<sequence>
+					<choice>
+						<element ref="gml:conversionToPreferredUnit"/>
+						<element ref="gml:roughConversionToPreferredUnit"/>
+					</choice>
+					<element ref="gml:derivationUnitTerm" minOccurs="0" maxOccurs="unbounded"/>
+				</sequence>
+			</extension>
+		</complexContent>
+	</complexType>
+	<element name="conversionToPreferredUnit" type="gml:ConversionToPreferredUnitType">
+		<annotation>
+			<documentation>The elements gml:conversionToPreferredUnit and gml:roughConversionToPreferredUnit represent parameters used to convert conventional units to preferred units for this physical quantity type.  A preferred unit is either a Base Unit or a Derived Unit that is selected for all values of one physical quantity type.</documentation>
+		</annotation>
+	</element>
+	<element name="roughConversionToPreferredUnit" type="gml:ConversionToPreferredUnitType">
+		<annotation>
+			<documentation>The elements gml:conversionToPreferredUnit and gml:roughConversionToPreferredUnit represent parameters used to convert conventional units to preferred units for this physical quantity type.  A preferred unit is either a Base Unit or a Derived Unit that is selected for all values of one physical quantity type.</documentation>
+		</annotation>
+	</element>
+	<complexType name="ConversionToPreferredUnitType">
+		<annotation>
+			<documentation>The inherited attribute uom references the preferred unit that this conversion applies to. The conversion of a unit to the preferred unit for this physical quantity type is specified by an arithmetic conversion (scaling and/or offset). The content model extends gml:UnitOfMeasureType, which has a mandatory attribute uom which identifies the preferred unit for the physical quantity type that this conversion applies to. The conversion is specified by a choice of 
+-	gml:factor, which defines the scale factor, or
+-	gml:formula, which defines a formula 
+by which a value using the conventional unit of measure can be converted to obtain the corresponding value using the preferred unit of measure.  
+The formula defines the parameters of a simple formula by which a value using the conventional unit of measure can be converted to the corresponding value using the preferred unit of measure. The formula element contains elements a, b, c and d, whose values use the XML Schema type double. These values are used in the formula y = (a + bx) / (c + dx), where x is a value using this unit, and y is the corresponding value using the base unit. The elements a and d are optional, and if values are not provided, those parameters are considered to be zero. If values are not provided for both a and d, the formula is equivalent to a fraction with numerator and denominator parameters.</documentation>
+		</annotation>
+		<complexContent>
+			<extension base="gml:UnitOfMeasureType">
+				<choice>
+					<element name="factor" type="double"/>
+					<element name="formula" type="gml:FormulaType"/>
+				</choice>
+			</extension>
+		</complexContent>
+	</complexType>
+	<complexType name="FormulaType">
+		<sequence>
+			<element name="a" type="double" minOccurs="0"/>
+			<element name="b" type="double"/>
+			<element name="c" type="double"/>
+			<element name="d" type="double" minOccurs="0"/>
+		</sequence>
+	</complexType>
+</schema>

pycsw/plugins/profiles/apiso/schemas/ogc/iso/19139/20060504/gml/valueObjects.xsd

@@ -0,0 +1,212 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<schema targetNamespace="http://www.opengis.net/gml" xmlns:gml="http://www.opengis.net/gml" xmlns:sch="http://www.ascc.net/xml/schematron" xmlns="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" version="3.2.0">
+	<annotation>
+		<appinfo source="urn:ogc:specification:gml:schema-xsd:valueObjects:3.2.0">valueObjects.xsd</appinfo>
+		<documentation>See ISO/DIS 19136 17.5.
+The elements declared in this Clause build on other GML schema components, in particular gml:AbstractTimeObject, gml:AbstractGeometry, and the following types:  gml:MeasureType, gml:MeasureListType, gml:CodeType, gml:CodeOrNilReasonListType, gml:BooleanOrNilReasonListType, gml:IntegerOrNilReasonList.  
+Of particular interest are elements that are the heads of substitution groups, and one named choice group. These are the primary reasons for the value objects schema, since they may act as variables in the definition of content models, such as Observations, when it is desired to permit alternative value types to occur some of which may have complex content such as arrays, geometry and time objects, and where it is useful not to prescribe the actual value type in advance. The members of the groups include quantities, category classifications, boolean, count, temporal and spatial values, and aggregates of these.  
+The value objects are defined in a hierarchy. The following relationships are defined:
+-	Concrete elements gml:Quantity, gml:Category, gml:Count and gml:Boolean are substitutable for the abstract element gml:AbstractScalarValue.  
+-	Concrete elements gml:QuantityList, gml:CategoryList, gml:CountList and gml:BooleanList are substitutable for the abstract element gml:AbstractScalarValueList.  
+-	Concrete element gml:ValueArray is substitutable for the concrete element gml:CompositeValue.  
+-	Abstract elements gml:AbstractScalarValue and gml:AbstractScalarValueList, and concrete elements gml:CompositeValue, gml:ValueExtent, gml:CategoryExtent, gml:CountExtent and gml:QuantityExtent are substitutable for abstract element gml:AbstractValue.  
+-	Abstract elements gml:AbstractValue, gml:AbstractTimeObject and gml:AbstractGeometry are all in a choice group named gml:Value, which is used for compositing in gml:CompositeValue and gml:ValueExtent.  
+-	Schemas which need values may use the abstract element gml:AbstractValue in a content model in order to permit any of the gml:AbstractScalarValues, gml:AbstractScalarValueLists, gml:CompositeValue or gml:ValueExtent to occur in an instance, or the named group gml:Value to also permit gml:AbstractTimeObjects, gml:AbstractGeometrys.  </documentation>
+	</annotation>
+	<include schemaLocation="geometryBasic0d1d.xsd"/>
+	<include schemaLocation="temporal.xsd"/>
+	<element name="Boolean" substitutionGroup="gml:AbstractScalarValue" nillable="true">
+		<complexType>
+			<simpleContent>
+				<extension base="boolean">
+					<attribute name="nilReason" type="gml:NilReasonType"/>
+				</extension>
+			</simpleContent>
+		</complexType>
+	</element>
+	<element name="BooleanList" type="gml:booleanOrNilReasonList" substitutionGroup="gml:AbstractScalarValueList"/>
+	<element name="Category" substitutionGroup="gml:AbstractScalarValue" nillable="true">
+		<annotation>
+			<documentation>A gml:Category has an optional XML attribute codeSpace, whose value is a URI which identifies a dictionary, codelist or authority for the term.</documentation>
+		</annotation>
+		<complexType>
+			<simpleContent>
+				<extension base="gml:CodeType">
+					<attribute name="nilReason" type="gml:NilReasonType"/>
+				</extension>
+			</simpleContent>
+		</complexType>
+	</element>
+	<element name="CategoryList" type="gml:CodeOrNilReasonListType" substitutionGroup="gml:AbstractScalarValueList"/>
+	<element name="Count" substitutionGroup="gml:AbstractScalarValue" nillable="true">
+		<complexType>
+			<simpleContent>
+				<extension base="integer">
+					<attribute name="nilReason" type="gml:NilReasonType"/>
+				</extension>
+			</simpleContent>
+		</complexType>
+	</element>
+	<element name="CountList" type="gml:integerOrNilReasonList" substitutionGroup="gml:AbstractScalarValueList"/>
+	<element name="Quantity" substitutionGroup="gml:AbstractScalarValue" nillable="true">
+		<annotation>
+			<documentation>An XML attribute uom (“unit of measure”) is required, whose value is a URI which identifies the definition of a ratio scale or units by which the numeric value shall be multiplied, or an interval or position scale on which the value occurs.</documentation>
+		</annotation>
+		<complexType>
+			<simpleContent>
+				<extension base="gml:MeasureType">
+					<attribute name="nilReason" type="gml:NilReasonType"/>
+				</extension>
+			</simpleContent>
+		</complexType>
+	</element>
+	<element name="QuantityList" type="gml:MeasureOrNilReasonListType" substitutionGroup="gml:AbstractScalarValueList"/>
+	<element name="AbstractValue" type="anyType" abstract="true" substitutionGroup="gml:AbstractObject">
+		<annotation>
+			<documentation>gml:AbstractValue is an abstract element which acts as the head of a substitution group which contains gml:AbstractScalarValue, gml:AbstractScalarValueList, gml:CompositeValue and gml:ValueExtent, and (transitively) the elements in their substitution groups.
+These elements may be used in an application schema as variables, so that in an XML instance document any member of its substitution group may occur.</documentation>
+		</annotation>
+	</element>
+	<element name="AbstractScalarValue" type="anyType" abstract="true" substitutionGroup="gml:AbstractValue">
+		<annotation>
+			<documentation>gml:AbstractScalarValue is an abstract element which acts as the head of a substitution group which contains gml:Boolean, gml:Category, gml:Count and gml:Quantity, and (transitively) the elements in their substitution groups.</documentation>
+		</annotation>
+	</element>
+	<element name="AbstractScalarValueList" type="anyType" abstract="true" substitutionGroup="gml:AbstractValue">
+		<annotation>
+			<documentation>gml:AbstractScalarValueList is an abstract element which acts as the head of a substitution group which contains gml:BooleanList, gml:CategoryList, gml:CountList and gml:QuantityList, and (transitively) the elements in their substitution groups.</documentation>
+		</annotation>
+	</element>
+	<group name="Value">
+		<annotation>
+			<documentation>This is a convenience choice group which unifies generic values defined in this Clause with spatial and temporal objects and the measures described above, so that any of these may be used within aggregate values.</documentation>
+		</annotation>
+		<choice>
+			<element ref="gml:AbstractValue"/>
+			<element ref="gml:AbstractGeometry"/>
+			<element ref="gml:AbstractTimeObject"/>
+			<element ref="gml:Null"/>
+		</choice>
+	</group>
+	<element name="valueProperty" type="gml:ValuePropertyType">
+		<annotation>
+			<documentation>Property that refers to, or contains, a Value. Convenience element for general use.</documentation>
+		</annotation>
+	</element>
+	<element name="valueComponent" type="gml:ValuePropertyType">
+		<annotation>
+			<documentation>Property that refers to, or contains, a Value.</documentation>
+		</annotation>
+	</element>
+	<complexType name="ValuePropertyType">
+		<sequence minOccurs="0">
+			<group ref="gml:Value"/>
+		</sequence>
+		<attributeGroup ref="gml:AssociationAttributeGroup"/>
+		<attributeGroup ref="gml:OwnershipAttributeGroup"/>
+	</complexType>
+	<element name="valueComponents" type="gml:ValueArrayPropertyType">
+		<annotation>
+			<documentation>Property that contains Values.</documentation>
+		</annotation>
+	</element>
+	<complexType name="ValueArrayPropertyType">
+		<sequence maxOccurs="unbounded">
+			<group ref="gml:Value"/>
+		</sequence>
+		<attributeGroup ref="gml:OwnershipAttributeGroup"/>
+	</complexType>
+	<element name="CompositeValue" type="gml:CompositeValueType" substitutionGroup="gml:AbstractValue">
+		<annotation>
+			<documentation>gml:CompositeValue is an aggregate value built from other values . It contains zero or an arbitrary number of gml:valueComponent elements, and zero or one gml:valueComponents property elements.  It may be used for strongly coupled aggregates (vectors, tensors) or for arbitrary collections of values.</documentation>
+		</annotation>
+	</element>
+	<complexType name="CompositeValueType">
+		<complexContent>
+			<extension base="gml:AbstractGMLType">
+				<sequence>
+					<element ref="gml:valueComponent" minOccurs="0" maxOccurs="unbounded"/>
+					<element ref="gml:valueComponents" minOccurs="0"/>
+				</sequence>
+				<attributeGroup ref="gml:AggregationAttributeGroup"/>
+			</extension>
+		</complexContent>
+	</complexType>
+	<element name="ValueArray" type="gml:ValueArrayType" substitutionGroup="gml:CompositeValue">
+		<annotation>
+			<documentation>A Value Array is used for homogeneous arrays of primitive and aggregate values.  
+The member values may be scalars, composites, arrays or lists.
+ValueArray has the same content model as CompositeValue, but the member values shall be homogeneous.  The element declaration contains a Schematron constraint which expresses this restriction precisely.  Since the members are homogeneous, the gml:referenceSystem (uom, codeSpace) may be specified on the gml:ValueArray itself and inherited by all the members if desired.</documentation>
+			<appinfo>
+				<sch:pattern name="Check either codeSpace or uom not both">
+					<sch:rule context="gml:ValueArray">
+						<sch:report test="@codeSpace and @uom">ValueArray may not carry both a reference to a codeSpace and a uom</sch:report>
+					</sch:rule>
+				</sch:pattern>
+				<sch:pattern name="Check components are homogeneous">
+					<sch:rule context="gml:ValueArray">
+						<sch:assert test="count(gml:valueComponent/*) = count(gml:valueComponent/*[name() = name(../../gml:valueComponent[1]/*[1])])">All components of <sch:name/> shall be of the same type</sch:assert>
+						<sch:assert test="count(gml:valueComponents/*) = count(gml:valueComponents/*[name() = name(../*[1])])">All components of <sch:name/> shall be of the same type</sch:assert>
+					</sch:rule>
+				</sch:pattern>
+			</appinfo>
+		</annotation>
+	</element>
+	<complexType name="ValueArrayType">
+		<complexContent>
+			<extension base="gml:CompositeValueType">
+				<attributeGroup ref="gml:referenceSystem"/>
+			</extension>
+		</complexContent>
+	</complexType>
+	<attributeGroup name="referenceSystem">
+		<attribute name="codeSpace" type="anyURI"/>
+		<attribute name="uom" type="gml:UomIdentifier"/>
+	</attributeGroup>
+	<element name="CategoryExtent" type="gml:CategoryExtentType" substitutionGroup="gml:AbstractValue"/>
+	<complexType name="CategoryExtentType">
+		<simpleContent>
+			<restriction base="gml:CodeOrNilReasonListType">
+				<length value="2"/>
+			</restriction>
+		</simpleContent>
+	</complexType>
+	<element name="CountExtent" type="gml:CountExtentType" substitutionGroup="gml:AbstractValue"/>
+	<simpleType name="CountExtentType">
+		<restriction base="gml:integerOrNilReasonList">
+			<length value="2"/>
+		</restriction>
+	</simpleType>
+	<element name="QuantityExtent" type="gml:QuantityExtentType" substitutionGroup="gml:AbstractValue"/>
+	<complexType name="QuantityExtentType">
+		<simpleContent>
+			<restriction base="gml:MeasureOrNilReasonListType">
+				<length value="2"/>
+			</restriction>
+		</simpleContent>
+	</complexType>
+	<complexType name="BooleanPropertyType">
+		<sequence minOccurs="0">
+			<element ref="gml:Boolean"/>
+		</sequence>
+		<attributeGroup ref="gml:AssociationAttributeGroup"/>
+	</complexType>
+	<complexType name="CategoryPropertyType">
+		<sequence minOccurs="0">
+			<element ref="gml:Category"/>
+		</sequence>
+		<attributeGroup ref="gml:AssociationAttributeGroup"/>
+	</complexType>
+	<complexType name="QuantityPropertyType">
+		<sequence minOccurs="0">
+			<element ref="gml:Quantity"/>
+		</sequence>
+		<attributeGroup ref="gml:AssociationAttributeGroup"/>
+	</complexType>
+	<complexType name="CountPropertyType">
+		<sequence minOccurs="0">
+			<element ref="gml:Count"/>
+		</sequence>
+		<attributeGroup ref="gml:AssociationAttributeGroup"/>
+	</complexType>
+</schema>

pycsw/plugins/profiles/apiso/schemas/ogc/iso/19139/20060504/gmx/catalogues.xsd

@@ -0,0 +1,112 @@
+<?xml version="1.0" encoding="utf-8"?>
+<xs:schema targetNamespace="http://www.isotc211.org/2005/gmx" elementFormDefault="qualified" version="0.1" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:gco="http://www.isotc211.org/2005/gco" xmlns:gmd="http://www.isotc211.org/2005/gmd" xmlns:gmx="http://www.isotc211.org/2005/gmx">
+	<!-- ================================= Annotation ================================ -->
+	<xs:annotation>
+		<xs:documentation>This file was generated from ISO TC/211 UML class diagrams == 04-27-2005 17:16:11 ====== Handcrafted</xs:documentation>
+	</xs:annotation>
+	<!-- ================================== Imports ================================== -->
+	<xs:import namespace="http://www.isotc211.org/2005/gmd" schemaLocation="../gmd/gmd.xsd"/>
+	<xs:import namespace="http://www.isotc211.org/2005/gco" schemaLocation="../gco/gco.xsd"/>
+	<xs:include schemaLocation="../gmx/uomItem.xsd"/>
+	<xs:include schemaLocation="../gmx/codelistItem.xsd"/>
+	<xs:include schemaLocation="../gmx/crsItem.xsd"/>
+	<!-- ########################################################################### -->
+	<!-- ########################################################################### -->
+	<!-- ================================== Classes ================================= -->
+	<xs:complexType name="AbstractCT_Catalogue_Type" abstract="true">
+		<xs:complexContent>
+			<xs:extension base="gco:AbstractObject_Type">
+				<xs:sequence>
+					<xs:element name="name" type="gco:CharacterString_PropertyType"/>
+					<xs:element name="scope" type="gco:CharacterString_PropertyType" maxOccurs="unbounded"/>
+					<xs:element name="fieldOfApplication" type="gco:CharacterString_PropertyType" minOccurs="0" maxOccurs="unbounded"/>
+					<xs:element name="versionNumber" type="gco:CharacterString_PropertyType"/>
+					<xs:element name="versionDate" type="gco:Date_PropertyType"/>
+					<xs:element name="language" type="gco:CharacterString_PropertyType" minOccurs="0"/>
+					<xs:element name="characterSet" type="gmd:MD_CharacterSetCode_PropertyType" minOccurs="0"/>
+					<xs:element name="locale" type="gmd:PT_Locale_PropertyType" minOccurs="0" maxOccurs="unbounded"/>
+					<xs:element name="subCatalogue" type="gmx:CT_Catalogue_PropertyType" minOccurs="0" maxOccurs="unbounded"/>
+				</xs:sequence>
+			</xs:extension>
+		</xs:complexContent>
+	</xs:complexType>
+	<!-- ........................................................................ -->
+	<xs:element name="AbstractCT_Catalogue" type="gmx:AbstractCT_Catalogue_Type" abstract="true"/>
+	<!-- ........................................................................ -->
+	<xs:complexType name="CT_Catalogue_PropertyType">
+		<xs:sequence minOccurs="0">
+			<xs:element ref="gmx:AbstractCT_Catalogue"/>
+		</xs:sequence>
+		<xs:attributeGroup ref="gco:ObjectReference"/>
+		<xs:attribute ref="gco:nilReason"/>
+	</xs:complexType>
+	<!-- =========================================================================== -->
+	<xs:complexType name="CT_CodelistCatalogue_Type">
+		<xs:complexContent>
+			<xs:extension base="gmx:AbstractCT_Catalogue_Type">
+				<xs:sequence>
+					<xs:element name="codelistItem" type="gmx:CT_Codelist_PropertyType" maxOccurs="unbounded"/>
+				</xs:sequence>
+			</xs:extension>
+		</xs:complexContent>
+	</xs:complexType>
+	<!-- ........................................................................ -->
+	<xs:element name="CT_CodelistCatalogue" type="gmx:CT_CodelistCatalogue_Type" substitutionGroup="gmx:AbstractCT_Catalogue"/>
+	<!-- ........................................................................ -->
+	<xs:complexType name="CT_CodelistCatalogue_PropertyType">
+		<xs:sequence minOccurs="0">
+			<xs:element ref="gmx:CT_CodelistCatalogue"/>
+		</xs:sequence>
+		<xs:attributeGroup ref="gco:ObjectReference"/>
+		<xs:attribute ref="gco:nilReason"/>
+	</xs:complexType>
+	<!-- =========================================================================== -->
+	<xs:complexType name="CT_CrsCatalogue_Type">
+		<xs:complexContent>
+			<xs:extension base="gmx:AbstractCT_Catalogue_Type">
+				<xs:sequence>
+					<xs:element name="crs" type="gmx:CT_CRS_PropertyType" maxOccurs="unbounded"/>
+					<xs:element name="coordinateSystem" type="gmx:CT_CoordinateSystem_PropertyType" minOccurs="0" maxOccurs="unbounded"/>
+					<xs:element name="axis" type="gmx:CT_CoordinateSystemAxis_PropertyType" minOccurs="0" maxOccurs="unbounded"/>
+					<xs:element name="datum" type="gmx:CT_Datum_PropertyType" minOccurs="0" maxOccurs="unbounded"/>
+					<xs:element name="ellipsoid" type="gmx:CT_Ellipsoid_PropertyType" minOccurs="0" maxOccurs="unbounded"/>
+					<xs:element name="primeMeridian" type="gmx:CT_PrimeMeridian_PropertyType" minOccurs="0" maxOccurs="unbounded"/>
+					<xs:element name="operation" type="gmx:CT_Operation_PropertyType" minOccurs="0" maxOccurs="unbounded"/>
+					<xs:element name="operationMethod" type="gmx:CT_OperationMethod_PropertyType" minOccurs="0" maxOccurs="unbounded"/>
+					<xs:element name="parameters" type="gmx:CT_OperationParameters_PropertyType" minOccurs="0" maxOccurs="unbounded"/>
+				</xs:sequence>
+			</xs:extension>
+		</xs:complexContent>
+	</xs:complexType>
+	<!-- ........................................................................ -->
+	<xs:element name="CT_CrsCatalogue" type="gmx:CT_CrsCatalogue_Type" substitutionGroup="gmx:AbstractCT_Catalogue"/>
+	<!-- ........................................................................ -->
+	<xs:complexType name="CT_CrsCatalogue_PropertyType">
+		<xs:sequence minOccurs="0">
+			<xs:element ref="gmx:CT_CrsCatalogue"/>
+		</xs:sequence>
+		<xs:attributeGroup ref="gco:ObjectReference"/>
+		<xs:attribute ref="gco:nilReason"/>
+	</xs:complexType>
+	<!-- =========================================================================== -->
+	<xs:complexType name="CT_UomCatalogue_Type">
+		<xs:complexContent>
+			<xs:extension base="gmx:AbstractCT_Catalogue_Type">
+				<xs:sequence>
+					<xs:element name="uomItem" type="gmx:UnitDefinition_PropertyType" maxOccurs="unbounded"/>
+				</xs:sequence>
+			</xs:extension>
+		</xs:complexContent>
+	</xs:complexType>
+	<!-- ........................................................................ -->
+	<xs:element name="CT_UomCatalogue" type="gmx:CT_UomCatalogue_Type" substitutionGroup="gmx:AbstractCT_Catalogue"/>
+	<!-- ........................................................................ -->
+	<xs:complexType name="CT_UomCatalogue_PropertyType">
+		<xs:sequence minOccurs="0">
+			<xs:element ref="gmx:CT_UomCatalogue"/>
+		</xs:sequence>
+		<xs:attributeGroup ref="gco:ObjectReference"/>
+		<xs:attribute ref="gco:nilReason"/>
+	</xs:complexType>
+	<!-- =========================================================================== -->
+</xs:schema>