gammasimtools 0.13.0__py3-none-any.whl → 0.15.0__py3-none-any.whl

simtools/schemas/model_parameters/fadc_lg_amplitude.schema.yml

@@ -15,7 +15,7 @@ description: |-
 short_description: Peak amplitude above pedestal for a photo electron with average
   signal (low-gain channels).
 data:
-  - type: double
+  - type: float64
     description: FADC amplitude (for low-gain channel in case of dual-readout chain).
     unit: count
     condition: num_gains==2

simtools/schemas/model_parameters/fadc_lg_compensate_pedestal.schema.yml

@@ -22,7 +22,7 @@ description: |-
   they are clipped at zero.
 short_description: Emulation of FADC pedestal compensation.
 data:
-  - type: int
+  - type: int64
     unit: dimensionless
     default: -1
     condition: num_gains==2

simtools/schemas/model_parameters/fadc_lg_dev_pedestal.schema.yml

@@ -13,7 +13,7 @@ developer_note: |-
 description: |-
   Deviation of (F)ADCs pedestals in a single channel (low-gain channels).
 data:
-  - type: double
+  - type: float64
     description: |-
       Deviation of (F)ADCs pedestals (for low-gain channels).
     unit: dimensionless

simtools/schemas/model_parameters/fadc_lg_err_compensate_pedestal.schema.yml

@@ -14,7 +14,7 @@ description: |-
   Used only when fadc_compensate_pedestal is activated.
 short_description: R.M.S. error on the pedestal evaluation for the compensation step.
 data:
-  - type: double
+  - type: float64
     unit: dimensionless
     default: -1.
     allowed_range:

simtools/schemas/model_parameters/fadc_lg_err_pedestal.schema.yml

@@ -20,7 +20,7 @@ short_description: |-
   Assumed error in initial calibration of pedestal
   (low-gain channels; affects only the reported pedestal).
 data:
-  - type: double
+  - type: float64
     description: |-
       Error in pedestal calibration
       (for low-gain channel in case of dual-readout chain).

simtools/schemas/model_parameters/fadc_lg_max_signal.schema.yml

@@ -11,7 +11,7 @@ description: |-
   For a typical 12-bit ADC this would be 4095.
 short_description: Maximum value of digitized signal per sample (low-gain channels).
 data:
-  - type: int
+  - type: int64
     description: |-
       Maximum FADC signal
       (for low-gain channel in case of dual-readout chain).

simtools/schemas/model_parameters/fadc_lg_max_sum.schema.yml

@@ -15,7 +15,7 @@ short_description: |-
   The maximum value of a pulse sum produced by hardware pulse summation,
   in sum mode rather than recording pulse samples (low-gain channels).
 data:
-  - type: int
+  - type: int64
     description: |-
       Maximum value of a pulse sum
       (for low-gain channel in case of dual-readout chain)

simtools/schemas/model_parameters/fadc_lg_noise.schema.yml

@@ -11,7 +11,7 @@ description: |-
   (for low-gain channel, if different gains are used).
 short_description: Gaussian r.m.s. spread of white noise per time bin in digitisation (low-gain channels).
 data:
-  - type: double
+  - type: float64
     description: |-
       Gaussian r.m.s. spread of white noise per time bin in digitisation
       (for low-gain channel in case of dual-readout chain)

simtools/schemas/model_parameters/fadc_lg_pedestal.schema.yml

@@ -8,7 +8,7 @@ meta_schema_version: 0.1.0
 name: fadc_lg_pedestal
 description: (F)ADC pedestal value per time slice (low-gain channels).
 data:
-  - type: double
+  - type: float64
     description: |-
       (F)ADC pedestal value per time slice
       (for low-gain channel in case of dual-readout chain).

simtools/schemas/model_parameters/fadc_lg_sensitivity.schema.yml

@@ -16,7 +16,7 @@ description: |-
   amplitude of a single photo-electron.
 short_description: FADC counts per mV voltage (for low-gain channels).
 data:
-  - type: double
+  - type: float64
     description: |-
       FADC counts per mV voltage.
       (for low-gain channel in case of dual-readout chain).

simtools/schemas/model_parameters/fadc_lg_sysvar_pedestal.schema.yml

@@ -12,7 +12,7 @@ description: |-
   (random) amount. Parameter determines the Gaussian r.m.s.
 short_description: Systematic common variations of pedestals (low-gain channels).
 data:
-  - type: double
+  - type: float64
     description: |-
       Systematic common variations of pedestals.
       (for low-gain channel in case of dual-readout chain).

simtools/schemas/model_parameters/fadc_lg_var_pedestal.schema.yml

@@ -11,7 +11,7 @@ description: |-
   time slice (low-gain channels). Value is the r.m.s. of the randomly chosen pedestal values
   around the FADC pedestal.
 data:
-  - type: double
+  - type: float64
     description: |-
       Pedestal variations
       (for low-gain channel in case of dual-readout chain).

simtools/schemas/model_parameters/fadc_lg_var_sensitivity.schema.yml

@@ -8,7 +8,7 @@ meta_schema_version: 0.1.0
 name: fadc_lg_var_sensitivity
 description: Relative variations in sensitivity (even for FADCs of the same channel; low-gain channels).
 data:
-  - type: double
+  - type: float64
     description: |-
       Relative variations in sensitivity
       (for low-gain channel in case of dual-readout chain).

simtools/schemas/model_parameters/fadc_max_signal.schema.yml

@@ -12,7 +12,7 @@ description: |-
   For a typical 12-bit ADC this would be 4095.
 short_description: Maximum value of digitized signal per sample.
 data:
-  - type: uint
+  - type: uint64
     description: |-
       Maximum FADC signal
       (for high-gain channel in case of dual-readout chain).

simtools/schemas/model_parameters/fadc_max_sum.schema.yml

@@ -16,7 +16,7 @@ short_description: |-
   The maximum value of a pulse sum produced by hardware pulse summation,
   in sum mode rather than recording pulse samples.
 data:
-  - type: uint
+  - type: uint64
     description: |-
       Maximum value of a pulse sum
       (for high-gain channel in case of dual-readout chain)

simtools/schemas/model_parameters/fadc_mhz.schema.yml

@@ -8,7 +8,7 @@ meta_schema_version: 0.1.0
 name: fadc_mhz
 description: FADC sampling rate.
 data:
-  - type: double
+  - type: float64
     default: 1000.
     unit: MHz
 instrument:

simtools/schemas/model_parameters/fadc_noise.schema.yml

@@ -11,7 +11,7 @@ description: |-
   (for high-gain channel, if different gains are used).
 short_description: Gaussian r.m.s. spread of white noise per time bin in digitization.
 data:
-  - type: double
+  - type: float64
     description: |-
       Gaussian r.m.s. spread of white noise per time bin in digitization
       (for high-gain channel in case of dual-readout chain)

simtools/schemas/model_parameters/fadc_pedestal.schema.yml

@@ -9,7 +9,7 @@ name: fadc_pedestal
 description: |-
   (F)ADC pedestal value per time slice (for high-gain channel for dual-gain readout).
 data:
-  - type: double
+  - type: float64
     description: |-
       (F)ADC pedestal value per time slice
       (for high-gain channel in case of dual-readout chain).

simtools/schemas/model_parameters/fadc_sensitivity.schema.yml

@@ -17,7 +17,7 @@ description: |-
   (for high-gain channel for dual-gain readout).
 short_description: FADC counts per mV voltage.
 data:
-  - type: double
+  - type: float64
     description: |-
       FADC counts per mV voltage.
       (for high-gain channel in case of dual-readout chain).

simtools/schemas/model_parameters/fadc_sum_bins.schema.yml

@@ -17,7 +17,7 @@ short_description: |-
   Number of bins read out in sampled data or summed up in ADC sum data.
   Corresponds to the experimental length of the readout window.
 data:
-  - type: uint
+  - type: uint64
     unit: dimensionless
     default: 0
     allowed_range:

simtools/schemas/model_parameters/fadc_sum_offset.schema.yml

@@ -16,7 +16,7 @@ short_description: |-
   Number of bins before telescope trigger where summing or reading of
   sampled data starts.
 data:
-  - type: int
+  - type: int64
     unit: dimensionless
     default: 0
     allowed_range:

simtools/schemas/model_parameters/fadc_sysvar_pedestal.schema.yml

@@ -13,7 +13,7 @@ description: |-
   (random) amount. Parameter determines the Gaussian r.m.s.
 short_description: Systematic common variations of pedestals.
 data:
-  - type: double
+  - type: float64
     description: |-
       Systematic common variations of pedestals.
       (for high-gain channel in case of dual-readout chain).

simtools/schemas/model_parameters/fadc_var_pedestal.schema.yml

@@ -12,7 +12,7 @@ description: |-
   around the FADC pedestal
   (for high-gain channel for dual-gain readout.
 data:
-  - type: double
+  - type: float64
     description: |-
       Pedestal variations
       (for high-gain channel in case of dual-readout chain).

simtools/schemas/model_parameters/fadc_var_sensitivity.schema.yml

@@ -9,7 +9,7 @@ name: fadc_var_sensitivity
 description: |-
   Relative variations in sensitivity (even for FADCs of the same channel).
 data:
-  - type: double
+  - type: float64
     description: |-
       Relative variations in sensitivity
       (for high-gain channel in case of dual-readout chain).

simtools/schemas/model_parameters/focal_length.schema.yml

@@ -18,7 +18,7 @@ description: |-
   focal length.
 short_description: Nominal overall focal length of the entire telescope.
 data:
-  - type: double
+  - type: float64
     unit: cm
     default: 1500.0
     allowed_range:

simtools/schemas/model_parameters/focal_surface_parameters.schema.yml

@@ -21,121 +21,121 @@ short_description: |-
   off-axis shape.
 data:
   - name: p0
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p1
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p2
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p3
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p4
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p5
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p6
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p7
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p8
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p9
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p10
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p11
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p12
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p13
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p14
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p15
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p16
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p17
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p18
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm
     default: 0.
   - name: p19
-    type: double
+    type: float64
     description: coefficient describing focal surface
     required: true
     unit: cm

simtools/schemas/model_parameters/focal_surface_ref_radius.schema.yml

@@ -8,7 +8,7 @@ meta_schema_version: 0.1.0
 name: focal_surface_ref_radius
 description: The length scale to which the focal_surface_parameters apply.
 data:
-  - type: double
+  - type: float64
     condition: mirror_class==2
     unit: cm
     default: 1.0

simtools/schemas/model_parameters/focus_offset.schema.yml

@@ -24,22 +24,22 @@ short_description: |-
   Distance of the starlight focus from the camera pixels (light guides)
   entry.
 data:
-  - type: double
+  - type: float64
     name: focus_offset
     description: Constant focus offset $\Delta_0$.
     unit: cm
     default: 2.8
-  - type: double
+  - type: float64
     description: Zenith angle $\Delta_0$ at which minimum is reached.
     unit: deg
     default: 28.0
-  - type: double
+  - type: float64
     description: |-
       Scaling term $k_c$ in
       $\Delta_c = (\cos(\theta)-\cos(\theta_0)) / k_c$.
     unit: dimensionless
     default: 0.0
-  - type: double
+  - type: float64
     description: |-
       Scaling term $k_s$ in
       $\Delta_s = (\sin(\theta)-\sin(\theta_0)) / k_s$.

simtools/schemas/model_parameters/gain_variation.schema.yml

@@ -15,7 +15,7 @@ description: |-
   The parameter sets the Gaussian r.m.s. spread of random fluctuations, used
   as \texttt{amplitude *= RandGaus(1., gain_variation)}.
 data:
-  - type: double
+  - type: float64
     unit: dimensionless
     default: 0.02
     allowed_range:

simtools/schemas/model_parameters/geomag_horizontal.schema.yml

@@ -11,7 +11,7 @@ description: |-
    Horizontal component in direction of magnetic North of the geomagnetic
    field at given site.
 data:
-  - type: double
+  - type: float64
     unit: uT
 instrument:
   class: Site

simtools/schemas/model_parameters/geomag_rotation.schema.yml

@@ -11,7 +11,7 @@ description: |-
    Rotation angle between geographic South and geomagnetic North direction
    (corresponds to CORSIKA ARRANG parameter).
 data:
-  - type: double
+  - type: float64
     unit: deg
     allowed_range:
       min: -180.0

simtools/schemas/model_parameters/geomag_vertical.schema.yml

@@ -11,7 +11,7 @@ description: |-
    Vertical component in downwards direction of the geomagnetic
    field at given site.
 data:
-  - type: double
+  - type: float64
     unit: uT
 instrument:
   class: Site

simtools/schemas/model_parameters/hg_lg_variation.schema.yml

@@ -10,7 +10,7 @@ description: |-
   Relative pixel-to-pixel variation of the ratio of high-gain to
   low-gain amplitudes.
 data:
-  - type: double
+  - type: float64
     required: false
     condition: num_gains==2
     default: 0.0

simtools/schemas/model_parameters/iobuf_maximum.schema.yml

@@ -9,7 +9,7 @@ name: iobuf_maximum
 description: |-
   Buffer limits for input and output of eventio data.
 data:
-  - type: int
+  - type: int64
     unit: byte
     default: 200000000
     allowed_range:

simtools/schemas/model_parameters/iobuf_output_maximum.schema.yml

@@ -9,7 +9,7 @@ name: iobuf_output_maximum
 description: |-
   The maximum size of the I/O buffer for output data, including raw data for all telescopes.
 data:
-  - type: int
+  - type: int64
     unit: byte
     default: 20000000
     allowed_range:

simtools/schemas/model_parameters/laser_events.schema.yml

@@ -14,7 +14,7 @@ description: |-
 short_description: |-
   Relative variation of laser shots from shot to shot.
 data:
-  - type: int
+  - type: int64
     unit: dimensionless
     default: 0
     allowed_range:

simtools/schemas/model_parameters/laser_external_trigger.schema.yml

@@ -13,7 +13,7 @@ description: |-
 short_description: |-
   Use external trigger for calibration.
 data:
-  - type: int
+  - type: int64
     default: 0
     allowed_range:
       min: 0

simtools/schemas/model_parameters/laser_photons.schema.yml

@@ -11,7 +11,7 @@ description: |-
 short_description: |-
   Number of laser photons at each photo detector.
 data:
-  - type: double
+  - type: float64
     unit: dimensionless
     default: 500
     allowed_range:

simtools/schemas/model_parameters/laser_pulse_exptime.schema.yml

@@ -13,7 +13,7 @@ description: |-
 short_description: |-
   Exponentially decaying pulse shape time.
 data:
-  - type: double
+  - type: float64
     unit: "ns"
     default: 0
     allowed_range:

simtools/schemas/model_parameters/laser_pulse_offset.schema.yml

@@ -13,7 +13,7 @@ description: |-
 short_description: |-
   Shift position of the signal in the read-out window.
 data:
-  - type: double
+  - type: float64
     unit: "ns"
     default: 0.0
     allowed_range:

simtools/schemas/model_parameters/laser_pulse_sigtime.schema.yml

@@ -12,7 +12,7 @@ description: |-
 short_description: |-
   Gaussian pulse time width.
 data:
-  - type: double
+  - type: float64
     unit: "ns"
     default: 0
     allowed_range:

simtools/schemas/model_parameters/laser_pulse_twidth.schema.yml

@@ -12,7 +12,7 @@ description: |-
 short_description: |-
   Top-Hat pulse time full-width.
 data:
-  - type: double
+  - type: float64
     unit: "ns"
     default: 0
     allowed_range:

simtools/schemas/model_parameters/laser_var_photons.schema.yml

@@ -11,7 +11,7 @@ description: |-
 short_description: |-
   Relative variation of laser shots from shot to shot.
 data:
-  - type: double
+  - type: float64
     unit: dimensionless
     default: 0.05
     allowed_range:

simtools/schemas/model_parameters/laser_wavelength.schema.yml

@@ -12,7 +12,7 @@ description: |-
 short_description: |-
   Wavelength of light-source.
 data:
-  - type: double
+  - type: float64
     unit: "nm"
     default: 400
     allowed_range:

simtools/schemas/model_parameters/led_events.schema.yml

@@ -13,7 +13,7 @@ description: |-
 short_description: |-
   Additional calibration-type events.
 data:
-  - type: int
+  - type: int64
     unit: dimensionless
     default: 0
     allowed_range:

simtools/schemas/model_parameters/led_photons.schema.yml

@@ -13,7 +13,7 @@ description: |-
 short_description: |-
   LED intensity in the camera lid in front of each pixel.
 data:
-  - type: double
+  - type: float64
     unit: dimensionless
     default: 4.0
     allowed_range:

simtools/schemas/model_parameters/led_pulse_offset.schema.yml

@@ -13,7 +13,7 @@ description: |-
 short_description: |-
   Shift position of the signal in the read-out window.
 data:
-  - type: double
+  - type: float64
     unit: "ns"
     default: 0.0
 instrument:

simtools/schemas/model_parameters/led_pulse_sigtime.schema.yml

@@ -12,7 +12,7 @@ description: |-
 short_description: |-
   Gaussian sigma LED pulse width.
 data:
-  - type: double
+  - type: float64
     unit: "ns"
     default: 0.0
     allowed_range:

simtools/schemas/model_parameters/led_var_photons.schema.yml

@@ -12,7 +12,7 @@ description: |-
 short_description: |-
   Average amplitude variation of LED in front of each pixel.
 data:
-  - type: double
+  - type: float64
     unit: dimensionless
     default: 0.0
     allowed_range: