gammasimtools 0.12.0__py3-none-any.whl → 0.14.0__py3-none-any.whl

simtools/schemas/model_parameters/secondary_mirror_parameters.schema.yml

@@ -30,121 +30,121 @@ short_description: |-
   along the optical axis and its shape.
 data:
   - name: p0
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p1
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p2
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p3
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p4
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p5
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p6
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p7
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p8
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p9
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p10
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p11
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p12
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p13
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p14
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p15
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p16
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p17
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p18
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm
     default: 0.
   - name: p19
-    type: double
+    type: float64
     description: coefficient describing secondary mirror
     required: true
     unit: cm

simtools/schemas/model_parameters/secondary_mirror_ref_radius.schema.yml

@@ -14,7 +14,7 @@ short_description: The length scale to which the secondary_mirror_parameters app
 data:
   - name: secondary_ref_radius
     description: The length scale to which the secondary_mirror_parameters apply.
-    type: double
+    type: float64
     unit: cm
     condition: mirror_class==2
     default: 1.

simtools/schemas/model_parameters/secondary_mirror_segmentation.schema.yml

@@ -17,7 +17,7 @@ short_description: |-
 data:
   - type: file
     unit: dimensionless
-    default: None
+    default: null
 instrument:
   class: Structure
   type:

simtools/schemas/model_parameters/secondary_mirror_shadow_diameter.schema.yml

@@ -16,7 +16,7 @@ short_description: |-
   The diameter of any non-reflective but not transparent (black)
   central part of the secondary mirror in a dual-mirror telescope.
 data:
-  - type: double
+  - type: float64
     unit: cm
     condition: mirror_class==2
     default: -1.

simtools/schemas/model_parameters/secondary_mirror_shadow_offset.schema.yml

@@ -16,7 +16,7 @@ short_description: |-
   The offset of the shadowing element from the level of the edge of the
   secondary mirror.
 data:
-  - type: double
+  - type: float64
     unit: cm
     condition: mirror_class==2
     default: 0.0

simtools/schemas/model_parameters/stars.schema.yml

@@ -0,0 +1,36 @@
+%YAML 1.2
+---
+title: Schema for stars model parameter
+version: 0.1.0
+meta_schema: simpipe-schema
+meta_schema_url: https://raw.githubusercontent.com/gammasim/simtools/main/src/simtools/schemas/model_parameter_and_data_schema.metaschema.yml
+meta_schema_version: 0.1.0
+developer_note: To be replaced by a data table
+name: stars
+description: |-
+  A file with a list of stars shining, containing one row per star with azimuth,
+  altitude (both in degrees) and weighting factor for the number of photons. An
+  optional fourth value is the distance of the light source (in kilometers) or 0
+  (standing for infinity). In addition to ray-tracing evaluation, the stars also contribute
+  to the nighsky background rate in the affected pixels.
+short_description: File with shining stars in Az/Alt.
+data:
+  - type: file
+    unit: dimensionless
+    default: null
+instrument:
+  class: Site
+  type:
+    - Atmosphere
+  site:
+    - North
+    - South
+activity:
+  setting:
+    - SetParameterFromExternal
+  validation:
+    - ValidateParameterByExpert
+source:
+  - Calibration
+simulation_software:
+  - name: sim_telarray

simtools/schemas/model_parameters/store_photoelectrons.schema.yml

@@ -15,7 +15,7 @@ description: |-
   in fewer than the given number of photo-electrons, as no attempt is made to trace photons through the telescope
   and produce any photo-electrons if there are too few photons in the first place.
 data:
-  - type: int
+  - type: int64
     unit: dimensionless
     default: -1
     allowed_range:

simtools/schemas/model_parameters/tailcut_scale.schema.yml

@@ -12,7 +12,7 @@ description: |-
   for the various levels of confidence that a pixel actually belongs to the shower image.
   Instead of making them individually configurable, a common scale factor can be applied to all of them.
 data:
-  - type: double
+  - type: float64
     unit: dimensionless
     default: 1
     allowed_range:

simtools/schemas/model_parameters/telescope_axis_height.schema.yml

@@ -8,7 +8,7 @@ meta_schema_version: 0.1.0
 name: telescope_axis_height
 description: Height of telescope elevation axis above ground level.
 data:
-  - type: double
+  - type: float64
     unit: m
 instrument:
   class: Structure

simtools/schemas/model_parameters/telescope_random_angle.schema.yml

@@ -12,7 +12,7 @@ description: |-
   this misalignment are saved as telescope azimuth and altitude
   pointing directions.
 data:
-  - type: double
+  - type: float64
     unit: deg
     default: 0.001
 instrument:

simtools/schemas/model_parameters/telescope_random_error.schema.yml

@@ -11,7 +11,7 @@ description: |-
   (Gaussian r.m.s.). The resulting telescope pointing including
   this misalignment is not saved to the simulation output.
 data:
-  - type: double
+  - type: float64
     unit: deg
     default: 0.001
 instrument:

simtools/schemas/model_parameters/telescope_sphere_radius.schema.yml

@@ -13,7 +13,7 @@ description: |-
   are fully contained.
 short_description: Telescope fiducial sphere radius.
 data:
-  - type: double
+  - type: float64
     unit: m
 instrument:
   class: Structure

simtools/schemas/model_parameters/telescope_transmission.schema.yml

@@ -40,7 +40,7 @@ short_description: |-
   shadowing by masts.
 data:
   - name: constant_p0
-    type: double
+    type: float64
     description: |
       Constant transmission factor $p_0$.
     required: true
@@ -51,7 +51,7 @@ data:
       max: 1.0
   - name: transmission_function
     required: false
-    type: double
+    type: float64
     description: |
       Transmission function identifier.
     default: 0
@@ -63,28 +63,28 @@ data:
     description: |
       Transmission factor $p_2$.
     required: false
-    type: double
+    type: float64
     default: 0.0
     unit: dimensionless
   - name: transmission_p3
     description: |
       Transmission factor $p_3$.
     required: false
-    type: double
+    type: float64
     default: 0.0
     unit: dimensionless
   - name: transmission_p4
     description: |
       Transmission factor $p_4$.
     required: false
-    type: double
+    type: float64
     default: 0.0
     unit: dimensionless
   - name: transmission_p5
     description: |
       Transmission factor $p_5.
     required: false
-    type: double
+    type: float64
     default: 0.0
     unit: dimensionless
 instrument:

simtools/schemas/model_parameters/teltrig_min_sigsum.schema.yml

@@ -13,7 +13,7 @@ description: |-
   of these values being non-zero should be sufficient.
 short_description: Minimum signal sum at sector trigger over threshold.
 data:
-  - type: double
+  - type: float64
     unit: mV * ns
     default: 7.8
     allowed_range:

simtools/schemas/model_parameters/teltrig_min_time.schema.yml

@@ -8,7 +8,7 @@ meta_schema_version: 0.1.0
 name: teltrig_min_time
 description: Minimum time of sector trigger over threshold.
 data:
-  - type: double
+  - type: float64
     unit: ns
     default: 1.5
     allowed_range:

simtools/schemas/model_parameters/transit_time_calib_error.schema.yml

@@ -10,7 +10,7 @@ description: |-
   Accuracy with which the actual signal delay due to transit
   time variation and corresponding compensation can be determined.
 data:
-  - type: double
+  - type: float64
     unit: ns
     default: 0.
     allowed_range:

simtools/schemas/model_parameters/transit_time_compensate_error.schema.yml

@@ -11,7 +11,7 @@ description: |-
   transit time compensation can be determined before the
   compensation is applied.
 data:
-  - type: double
+  - type: float64
     unit: ns
     default: 0.0
     allowed_range:

simtools/schemas/model_parameters/transit_time_compensate_step.schema.yml

@@ -12,7 +12,7 @@ description: |-
   A value of zero means no compensation is applied.
   The same compensation is applied to all channels.
 data:
-  - type: double
+  - type: float64
     unit: ns
     default: 0.0
     allowed_range:

simtools/schemas/model_parameters/transit_time_error.schema.yml

@@ -19,7 +19,7 @@ description: |-
   compensation if used, is reported in the calibration data block, but only
   up to a random accuracy defined by par:transit-time-calib-error.
 data:
-  - type: double
+  - type: float64
     unit: ns
     default: 0.
     allowed_range:

simtools/schemas/model_parameters/transit_time_jitter.schema.yml

@@ -10,7 +10,7 @@ description: |-
   Time jitter (Gaussian r.m.s. spread of random fluctuations) of individual
   photo-electrons.
 data:
-  - type: double
+  - type: float64
     unit: ns
     default: 0.75
     allowed_range:

simtools/schemas/model_parameters/trigger_current_limit.schema.yml

@@ -8,7 +8,7 @@ meta_schema_version: 0.1.0
 name: trigger_current_limit
 description: Pixels above this limit are excluded from the trigger.
 data:
-  - type: double
+  - type: float64
     unit: uA
     default: 20.0
 instrument:

simtools/schemas/model_parameters/trigger_delay_compensation.schema.yml

@@ -16,19 +16,19 @@ short_description: |-
   The delay applied to the trigger output to compensate for the different
   execution times of each trigger algorithm.
 data:
-  - type: double
+  - type: float64
     description: Delay applied for majority trigger.
     unit: ns
     default: 0.0
-  - type: double
+  - type: float64
     description: Delay applied for analog sum trigger.
     unit: ns
     default: 0.0
-  - type: double
+  - type: float64
     description: Delay applied for digital sum trigger.
     unit: ns
     default: 0.0
-  - type: double
+  - type: float64
     description: Delay (TODO this value is unclear)
     unit: ns
     default: 0.0

simtools/schemas/model_parameters/trigger_pixels.schema.yml

@@ -14,7 +14,7 @@ description: |-
   trigger_pixels.
 short_description: Number of pixels required for single telescope trigger.
 data:
-  - type: uint
+  - type: uint64
     unit: dimensionless
     default: 4
     allowed_range:

simtools/schemas/plot_configuration.metaschema.yml

@@ -0,0 +1,162 @@
+---
+$schema: http://json-schema.org/draft-06/schema#
+$ref: '#/definitions/SimtoolsPlotConfiguration'
+title: SimPipe plot configuration metaschema
+description: YAML representation of plot configuration metaschema
+version: 0.1.0
+name: plot_configuration.metaschema
+type: object
+additionalProperties: false
+
+definitions:
+  SimtoolsPlotConfiguration:
+    type: object
+    additionalProperties: false
+    properties:
+      CTA_SIMPIPE:
+        "$ref": "#/definitions/CTASIMPIPE"
+      SCHEMA_VERSION:
+        type: string
+        description: "Version of the schema."
+      SCHEMA_URL:
+        type: string
+        format: uri
+        description: "URL of the schema."
+      SCHEMA_NAME:
+        type: string
+        description: "Name of the schema."
+    required:
+      - CTA_SIMPIPE
+    title: "SimtoolsPlotConfiguration"
+  CTASIMPIPE:
+    type: object
+    additionalProperties: false
+    properties:
+      PLOT:
+        "$ref": "#/definitions/Plot"
+    required:
+      - PLOT
+    title: "CTASimpipe"
+  Plot:
+    description: "Plot configuration of simtools data visualization."
+    type: object
+    additionalProperties: false
+    properties:
+      TYPE:
+        type: string
+        description: "Type of the plot (e.g., mirror reflectivity, quantum_efficiency)."
+      TITLE:
+        type: string
+        description: "Title of the plot."
+      XTITLE:
+        type: string
+        description: "Title of x-axis."
+      YTITLE:
+        type: string
+        description: "Title of y-axis."
+      XSCALE:
+        type: string
+        enum: ["linear", "log"]
+        description: "Scale of x-axis (linear or log)."
+      YSCALE:
+        type: string
+        enum: ["linear", "log"]
+        description: "Scale of y-axis (linear or log)."
+      XLIM:
+        type: array
+        items:
+          type: [number, "null"]
+          description: "Limits for x-axis [min, max]. Use null for auto-limit."
+        minItems: 2
+        maxItems: 2
+      YLIM:
+        type: array
+        items:
+          type: [number, "null"]
+          description: "Limits for y-axis [min, max]. Use null for auto-limit."
+        minItems: 2
+        maxItems: 2
+      ERROR_TYPE:
+        type: string
+        enum: ["fill_between", "errorbar", "none"]
+        description: "Type of errors."
+      NO_MARKERS:
+        type: boolean
+        description: "Whether to display markers on data points."
+      PLOT_RATIO:
+        type: boolean
+        description: "Whether to display ratio plot."
+      TABLES:
+        type: array
+        description: "List of tables to plot."
+        items:
+          "$ref": "#/definitions/TableConfig"
+    required:
+      - TYPE
+      - TITLE
+      - XTITLE
+      - YTITLE
+      - TABLES
+    title: "Plot"
+  TableConfig:
+    type: object
+    description: "Configuration for a data table to plot."
+    additionalProperties: false
+    properties:
+      PARAMETER:
+        type: string
+        description: "Parameter name to retrieve data for."
+      FILE_NAME:
+        type: string
+        description: "Path to the data file."
+      TYPE:
+        type: string
+        description: "Type of data file."
+      TELESCOPE:
+        type: string
+        description: "Telescope descriptor to retrieve data for."
+      SITE:
+        type: string
+        description: "Site name (North/South)."
+      MODEL_VERSION:
+        type: string
+        description: "Model version to use."
+      PARAMETER_VERSION:
+        type: string
+        description: "Parameter version to use."
+      LABEL:
+        type: string
+        description: "Label for the plot legend."
+      COLUMN_X:
+        type: string
+        description: "Column name to use for x-axis."
+      COLUMN_Y:
+        type: string
+        description: "Column name to use for y-axis."
+      COLUMN_X_ERR:
+        type: string
+        description: "Column name to use for x-axis error."
+      COLUMN_Y_ERR:
+        type: string
+        description: "Column name to use for y-axis error."
+      NORMALIZE_Y:
+        type: boolean
+        description: "Whether to normalize y values."
+      SELECT_VALUES:
+        type: object
+        description: "Selection criteria for data filtering."
+        properties:
+          COLUMN_NAME:
+            type: string
+            description: "Column name to use for filtering."
+          VALUE:
+            type: [number, string]
+            description: "Value to filter by."
+        required:
+          - COLUMN_NAME
+          - VALUE
+    required:
+      - COLUMN_X
+      - COLUMN_Y
+      - LABEL
+    title: "TableConfig"

simtools/schemas/production_tables.schema.yml

@@ -29,7 +29,7 @@ definitions:
             pattern: '^\d+\.\d+\.\d+$'
         propertyNames:
           description: Allowed parameter name patterns.
-          pattern: '^([A-Za-z](ST|LL)[N,S,x]-\d{2,3}|[A-Za-z](ST|LL)[N,S,x]-(design|FlashCam|NectarCam)|OBS-(North|South)|Dummy-Telescope)$'
+          pattern: '^([A-Za-z](ST|LL|CT)[N,S,x]-\d{2,3}|[A-Za-z](ST|LL|CT)[N,S,x]-(design|FlashCam|NectarCam)|OBS-(North|South)|Dummy-Telescope)$'
       design_model:
         type: object
         description: Design models.