flashforge-python-api 1.2.3__py3-none-any.whl → 1.3.1__py3-none-any.whl

flashforge/api/controls/job_control.py

@@ -6,7 +6,7 @@ import base64
 import json
 import re
 from pathlib import Path
-from typing import TYPE_CHECKING
+from typing import TYPE_CHECKING, Any
 
 import aiohttp
 
@@ -15,6 +15,8 @@ from ...models.responses import (
     AD5XMaterialMapping,
     AD5XSingleColorJobParams,
     AD5XUploadParams,
+    Creator5JobParams,
+    Creator5UploadParams,
 )
 from ..constants.endpoints import Endpoints
 from ..network.utils import NetworkUtils, json_from_response
@@ -83,6 +85,13 @@ class JobControl:
         Returns:
             True if the firmware is new (>= 3.1.3), False otherwise or if version cannot be determined.
         """
+        # The 3.1.3 threshold only applies to the 5M family. The AD5X and Creator 5
+        # series always use the new payload/header format, and their firmware
+        # versioning isn't comparable to the 5M's 3.x line (e.g. the C5 reports
+        # 1.9.2, which the numeric check below would wrongly read as "old"), so
+        # short-circuit to the new format for them.
+        if self.client.is_ad5x or self.client.is_creator5 or self.client.is_creator5_pro:
+            return True
         try:
             current_version = self.client.firmware_ver.split(".")
             min_version = [3, 1, 3]
@@ -457,33 +466,150 @@ class JobControl:
             print(f"AD5X Single-Color Job error: {error}")
             raise error
 
-    def _validate_ad5x_printer(self) -> bool:
+    # --- Creator 5 / Creator 5 Pro ---
+    # The Creator 5 splits the material-station workflow across two requests,
+    # unlike the AD5X (which maps materials at upload time). On the C5:
+    #   1. Upload the file (POST /uploadGcode). The firmware reads `useMatlStation`
+    #      and `gcodeToolCnt` here to register the file as a multi-tool job. There
+    #      is NO `firstLayerInspection` header (the field doesn't exist on the
+    #      C5), and the booleans are checked as the string "true"/"false".
+    #   2. Start the print (POST /printGcode) with the per-tool
+    #      `materialMappings`. See start_creator5_job.
+
+    async def upload_file_creator5(self, params: Creator5UploadParams) -> bool:
         """
-        Validates that the current printer is an AD5X model.
+        Uploads a file (.gcode or .3mf) to a Creator 5 / Creator 5 Pro via
+        ``POST /uploadGcode``, with the C5-specific material-station headers.
+
+        Unlike :meth:`upload_file_ad5x` this sends no ``firstLayerInspection``
+        header (the C5 has no such field) and no ``materialMappings`` header (the
+        C5 maps materials at print-start, not upload). Booleans are sent as the
+        string "true"/"false".
+
+        Args:
+            params: Creator 5 upload parameters.
 
         Returns:
-            True if the printer is AD5X, false otherwise
+            True on success, False otherwise.
         """
-        if not self.client.is_ad5x:
-            print("AD5X Job error: This method can only be used with AD5X printers")
+        file_path_obj = Path(params.file_path)
+
+        if not file_path_obj.exists():
+            print(f"upload_file_creator5 error: File not found at {params.file_path}")
             return False
-        return True
 
-    def _encode_material_mappings_to_base64(
-        self, material_mappings: list[AD5XMaterialMapping]
-    ) -> str:
+        file_size = file_path_obj.stat().st_size
+        file_name = file_path_obj.name
+
+        print(
+            f"Starting Creator 5 upload for {file_name}, Size: {file_size}, "
+            f"Start: {params.start_print}, Level: {params.leveling_before_print}, "
+            f"MatlStation: {params.use_matl_station}, Tools: {params.gcode_tool_cnt}"
+        )
+
+        try:
+            # C5 upload headers. No firstLayerInspection (absent on the C5);
+            # booleans sent as "true"/"false" (firmware checks for "true"); no
+            # materialMappings header (C5 maps at print-start, not upload).
+            custom_headers = {
+                "serialNumber": self.client.serial_number,
+                "checkCode": self.client.check_code,
+                "fileSize": str(file_size),
+                "printNow": str(params.start_print).lower(),
+                "levelingBeforePrint": str(params.leveling_before_print).lower(),
+                "flowCalibration": str(params.flow_calibration).lower(),
+                "timeLapseVideo": str(params.time_lapse_video).lower(),
+                "useMatlStation": str(params.use_matl_station).lower(),
+                "gcodeToolCnt": str(params.gcode_tool_cnt),
+                "Expect": "100-continue",
+            }
+
+            print("Creator 5 Upload Request Headers:", custom_headers)
+
+            # Create multipart form data
+            async with aiohttp.ClientSession() as session:
+                with open(params.file_path, "rb") as f:
+                    data = aiohttp.FormData()
+                    data.add_field(
+                        "gcodeFile", f, filename=file_name, content_type="application/octet-stream"
+                    )
+
+                    async with session.post(
+                        self.client.get_endpoint(Endpoints.UPLOAD_FILE),
+                        data=data,
+                        headers=custom_headers,
+                    ) as response:
+                        print(f"Creator 5 Upload Response Status: {response.status}")
+
+                        if response.status != 200:
+                            print(
+                                f"Creator 5 Upload failed: Printer responded with "
+                                f"status {response.status}"
+                            )
+                            return False
+
+                        result = await json_from_response(response)
+                        print("Creator 5 Upload Response Data:", result)
+
+                        if NetworkUtils.is_ok(result):
+                            print("Creator 5 Upload successful according to printer response.")
+                            return True
+
+                        print(
+                            "Creator 5 Upload failed: Printer response code="
+                            f"{result.get('code')}, message={result.get('message')}"
+                        )
+                        return False
+
+        except Exception as e:
+            print(f"upload_file_creator5 error: {e}")
+            return False
+
+    async def start_creator5_job(self, params: Creator5JobParams) -> bool:
         """
-        Encodes material mappings array to base64 string for HTTP headers.
-        Converts AD5XMaterialMapping array to JSON and then to base64 encoding.
+        Starts a local print on a Creator 5 / Creator 5 Pro via ``POST /printGcode``.
+
+        This is the Creator 5's print-start material-matching command (distinct
+        from the AD5X, which maps materials at upload time). The file must already
+        be on the printer. Provide ``material_mappings`` for a multi-tool print, or
+        omit them for a single-tool print. Sends only the fields the Creator 5
+        firmware reads: NO ``useMatlStation`` / ``gcodeToolCnt`` (those live on the
+        upload) and NO ``firstLayerInspection`` (doesn't exist on the C5).
+        ``flowCalibration`` and ``timeLapseVideo`` are always present (default False).
 
         Args:
-            material_mappings: Array of material mappings to encode
+            params: File name, leveling flag, and optional flags / material mappings.
 
         Returns:
-            Base64-encoded JSON string
+            True if the printer accepts the print command, False if validation
+            fails or the printer rejects it.
+
+        Raises:
+            Exception: On a network failure sending the command.
         """
-        try:
-            json_array = [
+        if not self._validate_material_station_printer():
+            return False
+
+        if not params.file_name or params.file_name.strip() == "":
+            print("Creator 5 Job error: fileName cannot be empty")
+            return False
+
+        has_mappings = params.material_mappings is not None and len(params.material_mappings) > 0
+        if has_mappings and not self._validate_creator5_material_mappings(
+            params.material_mappings or []
+        ):
+            return False
+
+        payload: dict[str, Any] = {
+            "serialNumber": self.client.serial_number,
+            "checkCode": self.client.check_code,
+            "fileName": params.file_name,
+            "levelingBeforePrint": params.leveling_before_print,
+            "flowCalibration": params.flow_calibration,
+            "timeLapseVideo": params.time_lapse_video,
+        }
+        if has_mappings:
+            payload["materialMappings"] = [
                 {
                     "toolId": m.tool_id,
                     "slotId": m.slot_id,
@@ -491,71 +617,187 @@ class JobControl:
                     "toolMaterialColor": m.tool_material_color,
                     "slotMaterialColor": m.slot_material_color,
                 }
-                for m in material_mappings
+                for m in params.material_mappings or []
             ]
-            json_string = json.dumps(json_array)
-            return base64.b64encode(json_string.encode("utf-8")).decode("utf-8")
+
+        try:
+            session = await self.client.get_http_session()
+            async with session.post(
+                self.client.get_endpoint(Endpoints.GCODE_PRINT),
+                json=payload,
+                headers={"Content-Type": "application/json"},
+            ) as response:
+                if response.status != 200:
+                    return False
+
+                result = await json_from_response(response)
+                return NetworkUtils.is_ok(result)
+
         except Exception as error:
-            print("Failed to encode material mappings to base64:", error)
-            raise Exception("Failed to encode material mappings for upload") from error  # noqa: B904
+            print(f"Creator 5 Job error: {error}")
+            raise error
 
-    def _validate_material_mappings(self, material_mappings: list[AD5XMaterialMapping]) -> bool:
+    def _validate_material_station_printer(self) -> bool:
         """
-        Validates material mappings for AD5X multi-color jobs.
-        Checks toolId range (0-3), slotId range (1-4), and color format (#RRGGBB).
+        Validates that the current printer has a material station and therefore
+        supports material-mapping uploads/jobs. Covers AD5X and the Creator 5
+        series, which share the same material-mapping print flow (Creator 5 =
+        "AD5X + more").
+
+        Returns:
+            True if the printer supports material mappings, False otherwise.
+        """
+        if not self.client.is_ad5x and not self.client.is_creator5:
+            print(
+                "Material-station job error: this method requires an AD5X or "
+                "Creator 5 series printer"
+            )
+            return False
+        return True
+
+    def _validate_creator5_material_mappings(
+        self, material_mappings: list[AD5XMaterialMapping]
+    ) -> bool:
+        """
+        Validates Creator 5 material mappings. Delegates to the shared validator
+        with ``allow_empty=True`` (the C5 uses an empty array for the
+        single-tool print start).
 
         Args:
-            material_mappings: Array of material mappings to validate
+            material_mappings: Array of Creator 5 mappings to validate.
 
         Returns:
-            True if all mappings are valid, false otherwise
+            True if all mappings are valid, False otherwise.
+        """
+        return self._validate_mappings(
+            material_mappings, allow_empty=True, label="Creator 5 material mappings"
+        )
+
+    def _validate_mappings(
+        self,
+        material_mappings: list[AD5XMaterialMapping],
+        *,
+        allow_empty: bool,
+        label: str,
+    ) -> bool:
+        """
+        Shared material-mapping validator used by both the AD5X and Creator 5
+        flows. Checks toolId 0-3, slotId 1-4, non-empty materialName, and
+        ``#RRGGBB`` tool/slot colors.
+
+        Args:
+            material_mappings: Array of mappings to validate.
+            allow_empty: If True, an empty array is accepted (Creator 5
+                single-tool start). If False, an empty array is rejected
+                (AD5X multi-color jobs require at least one mapping).
+            label: Prefix for the printed validation-error messages.
+
+        Returns:
+            True if all mappings are valid, False otherwise.
         """
         if not material_mappings or len(material_mappings) == 0:
+            if allow_empty:
+                return True
             print(
-                "Material mappings validation error: materialMappings array cannot be empty for multi-color jobs"
+                f"{label} error: materialMappings array cannot be empty for multi-color jobs"
             )
             return False
 
         if len(material_mappings) > 4:
-            print("Material mappings validation error: Maximum 4 material mappings allowed")
+            print(f"{label} error: Maximum 4 material mappings allowed")
             return False
 
         hex_color_regex = re.compile(r"^#[0-9A-Fa-f]{6}$")
 
         for i, mapping in enumerate(material_mappings):
-            # Validate toolId (0-3)
             if mapping.tool_id < 0 or mapping.tool_id > 3:
                 print(
-                    f"Material mappings validation error: toolId must be between 0-3, got {mapping.tool_id} at index {i}"
+                    f"{label} error: toolId must be between 0-3, "
+                    f"got {mapping.tool_id} at index {i}"
                 )
                 return False
 
-            # Validate slotId (1-4)
             if mapping.slot_id < 1 or mapping.slot_id > 4:
                 print(
-                    f"Material mappings validation error: slotId must be between 1-4, got {mapping.slot_id} at index {i}"
+                    f"{label} error: slotId must be between 1-4, "
+                    f"got {mapping.slot_id} at index {i}"
                 )
                 return False
 
-            # Validate materialName is not empty
             if not mapping.material_name or mapping.material_name.strip() == "":
-                print(
-                    f"Material mappings validation error: materialName cannot be empty at index {i}"
-                )
+                print(f"{label} error: materialName cannot be empty at index {i}")
                 return False
 
-            # Validate toolMaterialColor format
             if not hex_color_regex.match(mapping.tool_material_color):
                 print(
-                    f"Material mappings validation error: toolMaterialColor must be in #RRGGBB format, got {mapping.tool_material_color} at index {i}"
+                    f"{label} error: toolMaterialColor must be in "
+                    f"#RRGGBB format, got {mapping.tool_material_color} at index {i}"
                 )
                 return False
 
-            # Validate slotMaterialColor format
             if not hex_color_regex.match(mapping.slot_material_color):
                 print(
-                    f"Material mappings validation error: slotMaterialColor must be in #RRGGBB format, got {mapping.slot_material_color} at index {i}"
+                    f"{label} error: slotMaterialColor must be in "
+                    f"#RRGGBB format, got {mapping.slot_material_color} at index {i}"
                 )
                 return False
 
         return True
+
+    def _validate_ad5x_printer(self) -> bool:
+        """
+        Validates that the current printer is an AD5X model.
+
+        Returns:
+            True if the printer is AD5X, false otherwise
+        """
+        if not self.client.is_ad5x:
+            print("AD5X Job error: This method can only be used with AD5X printers")
+            return False
+        return True
+
+    def _encode_material_mappings_to_base64(
+        self, material_mappings: list[AD5XMaterialMapping]
+    ) -> str:
+        """
+        Encodes material mappings array to base64 string for HTTP headers.
+        Converts AD5XMaterialMapping array to JSON and then to base64 encoding.
+
+        Args:
+            material_mappings: Array of material mappings to encode
+
+        Returns:
+            Base64-encoded JSON string
+        """
+        try:
+            json_array = [
+                {
+                    "toolId": m.tool_id,
+                    "slotId": m.slot_id,
+                    "materialName": m.material_name,
+                    "toolMaterialColor": m.tool_material_color,
+                    "slotMaterialColor": m.slot_material_color,
+                }
+                for m in material_mappings
+            ]
+            json_string = json.dumps(json_array)
+            return base64.b64encode(json_string.encode("utf-8")).decode("utf-8")
+        except Exception as error:
+            print("Failed to encode material mappings to base64:", error)
+            raise Exception("Failed to encode material mappings for upload") from error  # noqa: B904
+
+    def _validate_material_mappings(self, material_mappings: list[AD5XMaterialMapping]) -> bool:
+        """
+        Validates material mappings for AD5X multi-color jobs. Delegates to the
+        shared validator with ``allow_empty=False`` (AD5X multi-color jobs
+        require at least one mapping).
+
+        Args:
+            material_mappings: Array of material mappings to validate
+
+        Returns:
+            True if all mappings are valid, false otherwise
+        """
+        return self._validate_mappings(
+            material_mappings, allow_empty=False, label="Material mappings validation"
+        )