fiqus 2024.7.0__py3-none-any.whl → 2024.12.1__py3-none-any.whl

fiqus/data/DataFiQuSMultipole.py

@@ -1,66 +1,740 @@
-from pydantic import BaseModel
-from typing import (List, Literal, Optional)
+from pydantic import BaseModel, Field
+from typing import List, Dict, Literal, Union, Optional, Tuple
 
 
-class Threshold(BaseModel):
+class MultipoleGeoElement(BaseModel):
     """
-        Level 2: Class for FiQuS Multipole
+    Level 5: Class for FiQuS Multipole
     """
-    SizeMin: Optional[float] = None
-    SizeMax: Optional[float] = None
-    DistMin: Optional[float] = None
-    DistMax: Optional[float] = None
+    lines: Optional[int] = Field(
+        default=3,
+        description="It specifies the number of Gaussian points for lines.",
+    )
+    triangles: Optional[Literal[1, 3, 4, 6, 7, 12, 13, 16]] = Field(
+        default=3,
+        description="It specifies the number of Gaussian points for triangles.",
+    )
+    quadrangles: Optional[Literal[1, 3, 4, 7]] = Field(
+        default=4,
+        description="It specifies the number of Gaussian points for quadrangles.",
+    )
 
 
-class GeometryMultipole(BaseModel):
+class MultipoleSolveConvectionBoundaryCondition(BaseModel):
     """
-        Level 2: Class for FiQuS Multipole
+    Level 5: Class for FiQuS Multipole
     """
-    with_iron_yoke: Optional[bool] = None
+    boundaries: Optional[List[str]] = Field(
+        default=[],
+        description="It specifies the list of boundaries where the condition is applied."
+                    "Each boundary is identified by a string of the form <half-turn/wedge reference number><side>,"
+                    "where the accepted sides are i, o, l, h which correspond respectively to inner, outer, lower (angle), higher (angle): e.g., 1o",
+    )
+    heat_transfer_coefficient: Optional[Union[float, str]] = Field(
+        default=None,
+        description="It specifies the value or function name of the heat transfer coefficient for this boundary condition.",
+    )
 
 
-class MeshMultipole(BaseModel):
+class MultipoleSolveHeatFluxBoundaryCondition(BaseModel):
     """
-        Level 2: Class for FiQuS Multipole
+    Level 5: Class for FiQuS Multipole
     """
-    default_mesh: Optional[bool] = None
-    mesh_iron: Threshold = Threshold()
-    mesh_coil: Threshold = Threshold()
-    MeshSizeMin: Optional[float] = None  # sets gmsh Mesh.MeshSizeMin
-    MeshSizeMax: Optional[float] = None  # sets gmsh Mesh.MeshSizeMax
-    MeshSizeFromCurvature: Optional[float] = None  # sets gmsh Mesh.MeshSizeFromCurvature
-    Algorithm: Optional[int] = None  # sets gmsh Mesh.Algorithm
-    AngleToleranceFacetOverlap: Optional[float] = None  # sets gmsh Mesh.AngleToleranceFacetOverlap
-    ElementOrder: Optional[int] = None  # sets gmsh Mesh.ElementOrder
-    Optimize: Optional[int] = None  # sets gmsh Mesh.Optimize
+    boundaries: Optional[List[str]] = Field(
+        default=[],
+        description="It specifies the list of boundaries where the condition is applied."
+                    "Each boundary is identified by a string of the form <half-turn/wedge reference number><side>,"
+                    "where the accepted sides are i, o, l, h which correspond respectively to inner, outer, lower (angle), higher (angle): e.g., 1o",
+    )
+    const_heat_flux: Optional[float] = Field(
+        default=None,
+        description="It specifies the value of the heat flux for this boundary condition.",
+    )
+    # function_heat_flux: Optional[str] = None
 
 
-class SolveMultipoleFiQuS(BaseModel):
+class MultipoleSolveTemperatureBoundaryCondition(BaseModel):
     """
-        Level 2: Class for FiQuS Multipole
+    Level 5: Class for FiQuS Multipole
     """
-    I_initial: Optional[List[float]] = None
-    pro_template: Optional[str] = None  # file name of .pro template file
+    boundaries: Optional[List[str]] = Field(
+        default=[],
+        description="It specifies the list of boundaries where the condition is applied."
+                    "Each boundary is identified by a string of the form <half-turn/wedge reference number><side>,"
+                    "where the accepted sides are i, o, l, h which correspond respectively to inner, outer, lower (angle), higher (angle): e.g., 1o",
+    )
+    const_temperature: Optional[float] = Field(
+        default=None,
+        description="It specifies the value of the temperature for this boundary condition.",
+    )
+    # function_temperature: Optional[str] = None
 
 
-class PostProcMultipole(BaseModel):
+class MultipoleSolveQuenchInitiation(BaseModel):
     """
-        Level 2: Class for FiQuS Multipole
+    Level 4: Class for FiQuS Multipole
     """
-    compare_to_ROXIE: Optional[str] = None
-    plot_all: Optional[str | bool] = None
-    variables: Optional[List[str]] = None  # Name of variables to post-process, like "b" for magnetic flux density
-    volumes: Optional[List[str]] = None  # Name of domains to post-process, like "powered"
-    file_exts: Optional[List[str]] = None  # Name of file extensions to output to, like "pos"
-    additional_outputs: Optional[List[str]] = None  # Name of software specific input files to prepare, like "LEDET3D"
+    turns: Optional[List[int]] = Field(
+        default=[],
+        description="It specifies the list of reference numbers of half-turns whose critical currents are set to zero.",
+    )
+    t_trigger: Optional[List[float]] = Field(
+        default=[],
+        description="It specifies the list of time instants at which the critical current is set to zero.",
+    )
 
 
-class MPDM(BaseModel):
+class MultipoleSolveBoundaryConditionsThermal(BaseModel):
     """
-        Level 2: Class for FiQuS Multipole
+    Level 4: Class for FiQuS Multipole
     """
-    type: Literal['multipole'] = 'multipole'
-    geometry: GeometryMultipole = GeometryMultipole()
-    mesh: MeshMultipole = MeshMultipole()
-    solve: SolveMultipoleFiQuS = SolveMultipoleFiQuS()
-    postproc: PostProcMultipole = PostProcMultipole()
+    temperature: Optional[Dict[str, MultipoleSolveTemperatureBoundaryCondition]] = Field(
+        default={},
+        description="This dictionary contains the information about the Dirichlet boundary conditions."
+                    "The keys are chosen names for each boundary condition.",
+    )
+    heat_flux: Optional[Dict[str, MultipoleSolveHeatFluxBoundaryCondition]] = Field(
+        default={},
+        description="This dictionary contains the information about the Neumann boundary conditions."
+                    "The keys are chosen names for each boundary condition.",
+    )
+    cooling: Optional[Dict[str, MultipoleSolveConvectionBoundaryCondition]] = Field(
+        default={},
+        description="This dictionary contains the information about the Robin boundary conditions."
+                    "The keys are chosen names for each boundary condition.",
+    )
+
+
+# class MultipoleSolveTransientElectromagnetics(BaseModel):
+#     """
+#     Level 4: Class for FiQuS Multipole
+#     """
+#     time_stepping: Optional[Literal["adaptive", "fixed"]] = Field(
+#         default="adaptive",
+#         description="It specifies the type of time stepping.",
+#     )
+#     initial_time: Optional[float] = Field(
+#         default=0.,
+#         description="It specifies the initial time of the simulation.",
+#     )
+#     final_time: Optional[float] = Field(
+#         default=None,
+#         description="It specifies the final time of the simulation.",
+#     )
+#     fixed: MultipoleSolveTimeParametersFixed = Field(
+#         default=MultipoleSolveTimeParametersFixed(),
+#         description="This dictionary contains the information about the time parameters of the fixed time stepping.",
+#     )
+#     adaptive: MultipoleSolveTimeParametersAdaptive = Field(
+#         default=MultipoleSolveTimeParametersAdaptive(),
+#         description="This dictionary contains the information about the time parameters of the adaptive time stepping.",
+#     )
+
+
+class MultipoleSolveHeCooling(BaseModel):
+    """
+    Level 4: Class for FiQuS Multipole
+    """
+    enabled: Optional[bool] = Field(
+        default=False,
+        description="It determines whether the helium cooling is enabled or not (adiabatic conditions).",
+    )
+    sides: Optional[Literal["external", "inner", "outer", "inner_outer"]] = Field(
+        default="outer",
+        description="It specifies the general grouping of the boundaries where to apply cooling:"
+                    "'external': all external boundaries; 'inner': only inner boundaries; 'outer': only outer boundaries; 'inner_outer': inner and outer boundaries.",
+    )
+    heat_transfer_coefficient: Optional[Union[float, str]] = Field(
+        default=0.0,
+        description="It specifies the value or name of the function of the constant heat transfer coefficient.",
+    )
+
+class MultipoleSolveNonLinearSolver(BaseModel):
+    """
+    Level 4: Class for FiQuS Multipole
+    """
+    rel_tolerance: Optional[float] = Field(
+        default=1E-4,
+        description="It specifies the relative tolerance.",
+    )
+    abs_tolerance: Optional[float] = Field(
+        default=0.1,
+        description="It specifies the absolute tolerance.",
+    )
+    relaxation_factor: Optional[float] = Field(
+        default=0.7,
+        description="It specifies the relaxation factor.",
+    )
+    max_iterations: Optional[int] = Field(
+        default=20,
+        description="It specifies the maximum number of iterations if no convergence is reached.",
+    )
+    norm_type: Literal["L1Norm", "MeanL1Norm", "L2Norm", "MeanL2Norm", "LinfNorm"] = Field(
+        default='LinfNorm',
+        description="It specifies the type of norm to be calculated for convergence assessment.",
+    )
+
+
+class MultipoleSolveTransientThermal(BaseModel):
+    """
+    Level 4: Class for FiQuS Multipole
+    """
+    initial_time: Optional[float] = Field(
+        default=0.,
+        description="It specifies the initial time of the simulation.",
+    )
+    final_time: Optional[float] = Field(
+        default=None,
+        description="It specifies the final time of the simulation.",
+    )
+    initial_time_step: Optional[float] = Field(
+        default=1E-10,
+        description="It specifies the initial time step used at the beginning of the transient simulation.",
+    )
+    min_time_step: Optional[float] = Field(
+        default=1E-12,
+        description="It specifies the minimum possible value of the time step.",
+    )
+    max_time_step: Optional[float] = Field(
+        default=10,
+        description="It specifies the maximum possible value of the time step.",
+    )
+    breakpoints: Optional[List[float]] = Field(
+        default=[],
+        description="It forces the transient simulation to hit the time instants contained in this list.",
+    )
+    integration_method: Union[None, Literal[
+       "Euler", "Gear_2", "Gear_3", "Gear_4", "Gear_5", "Gear_6"
+    ]] = Field(
+        default="Euler",
+        title="Integration Method",
+        description="It specifies the type of integration method to be used.",
+    )
+    rel_tol_time: Optional[float] = Field(
+        default=1E-4,
+        description="It specifies the relative tolerance.",
+    )
+    abs_tol_time: Optional[float] = Field(
+        default=1e-4,
+        description="It specifies the absolute tolerance.",
+    )
+    norm_type: Literal["L1Norm", "MeanL1Norm", "L2Norm", "MeanL2Norm", "LinfNorm"] = Field(
+        default='LinfNorm',
+        description="It specifies the type of norm to be calculated for convergence assessment.",
+    )
+    stop_temperature: Optional[float] = Field(
+        default=300,
+        description="If one half turn reaches this temperature, the simulation is stopped.",
+    )
+
+
+class MultipoleSolveInsulationBlockToBlock(BaseModel):
+    """
+    Level 4: Class for FiQuS Multipole
+    It contains the information about the materials and thicknesses of the inner insulation regions (between blocks) modeled via thin-shell approximation.
+    """
+    material: Optional[str] = Field(
+        default=None,
+        description="It specifies the default material of the insulation regions between the blocks insulation regions.",
+    )
+    # the order of blocks should be: [inner, outer] for mid-layer couples or [lower, higher] for mid-pole and mid-winding couples
+    blocks_connection_overwrite: List[Tuple[str, str]] = Field(
+        default=[],
+        description="It specifies the blocks couples adjacent to the insulation region."
+                    "The blocks must be ordered from inner to outer block for mid-layer insulation regions and from lower to higher angle block for mid-pole and mid-winding insulation regions.",
+    )
+    materials_overwrite: Optional[List[List[str]]] = Field(
+        default=[],
+        description="It specifies the list of materials making up the layered insulation region to be placed between the specified blocks."
+                    "The materials must be ordered from inner to outer layers and lower to higher angle layers.",
+    )
+    thicknesses_overwrite: Optional[List[List[Optional[float]]]] = Field(
+        default=[],
+        description="It specifies the list of thicknesses of the specified insulation layers. The order must match the one of the materials list.",
+    )
+
+
+class MultipoleSolveInsulationExterior(BaseModel):
+    """
+    Level 4: Class for FiQuS Multipole
+    It contains the information about the materials and thicknesses of the outer insulation regions (exterior boundaries) modeled via thin-shell approximation.
+    """
+    blocks: Optional[List[str]] = Field(
+        default=[],
+        description="It specifies the reference numbers of the blocks adjacent to the exterior insulation regions to modify.",
+    )
+    materials_append: Optional[List[List[str]]] = Field(
+        default=[],
+        description="It specifies the list of materials making up the layered insulation region to be appended to the block insulation."
+                    "The materials must be ordered from the block outward.",
+    )
+    thicknesses_append: Optional[List[List[float]]] = Field(
+        default=[],
+        description="It specifies the list of thicknesses of the specified insulation layers. The order must match the one of the materials list.",
+    )
+
+
+class MultipoleSolveWedge(BaseModel):
+    """
+    Level 3: Class for FiQuS Multipole
+    """
+    material: Optional[str] = Field(
+        default=None,
+        description="It specifies the material of the wedge regions.",
+    )
+    RRR: Optional[float] = Field(
+        default=None,
+        description="It specifies the RRR of the wedge regions.",
+    )
+    T_ref_RRR_high: Optional[float] = Field(
+        default=None,
+        description="It specifies the reference temperature associated with the RRR.",
+    )
+
+
+class MultipoleSolveInsulationTSA(BaseModel):
+    """
+    Level 3: Class for FiQuS Multipole
+    """
+    block_to_block: MultipoleSolveInsulationBlockToBlock = Field(
+        default=MultipoleSolveInsulationBlockToBlock(),
+        description="This dictionary contains the information about the materials and thicknesses of the inner insulation regions (between blocks) modeled via thin-shell approximation.",
+    )
+    exterior: Optional[MultipoleSolveInsulationExterior] = Field(
+        default=MultipoleSolveInsulationExterior(),
+        description="This dictionary contains the information about the materials and thicknesses of the outer insulation regions (exterior boundaries) modeled via thin-shell approximation.",
+    )
+
+
+class MultipoleSolveThermal(BaseModel):
+    """
+    Level 3: Class for FiQuS Multipole
+    """
+    solve_type: Optional[Literal[None, "transient"]] = Field(
+        default=None,
+        description="It determines whether the thermal transient problem is solved ('transient') or not ('null').",
+    )
+    insulation_TSA: Optional[MultipoleSolveInsulationTSA] = Field(
+        default=MultipoleSolveInsulationTSA(),
+        description="This dictionary contains the information about the materials and thicknesses of the insulation regions modeled via thin-shell approximation.",
+    )
+    He_cooling: MultipoleSolveHeCooling = Field(
+        default=MultipoleSolveHeCooling(),
+        description="This dictionary contains the information about the Robin boundary condition for generic groups of boundaries.",
+    )
+    overwrite_boundary_conditions: Optional[MultipoleSolveBoundaryConditionsThermal] = Field(
+        default=MultipoleSolveBoundaryConditionsThermal(),
+        description="This dictionary contains the information about boundary conditions for explicitly specified boundaries.",
+    )
+    non_linear_solver: MultipoleSolveNonLinearSolver = Field(
+        default=MultipoleSolveNonLinearSolver(),
+        description="This dictionary contains the information about the parameters for the non-linear solver.",
+    )
+    time_stepping: MultipoleSolveTransientThermal = Field(
+        default=MultipoleSolveTransientThermal(),
+        description="This dictionary contains the information about the parameters for the transient solver.",
+    )
+    jc_degradation_to_zero: Optional[MultipoleSolveQuenchInitiation] = Field(
+        default=MultipoleSolveQuenchInitiation(),
+        description="This dictionary contains the information about half turns with zero critical current.",
+    )
+    init_temperature: Optional[float] = Field(
+        default=1.9,
+        description="It specifies the initial temperature of the simulation.",
+    )
+    enforce_init_temperature_as_minimum: Optional[bool] = Field(
+        default=False,
+        description="It determines whether the initial temperature is enforced as the minimum temperature of the simulation.",
+    )
+
+class MultipoleSolveElectromagnetics(BaseModel):
+    """
+    Level 3: Class for FiQuS Multipole
+    """
+    solve_type: Optional[Literal[None, "stationary"]] = Field(
+        default=None,
+        description="It determines whether the magneto-static problem is solved ('stationary') or not ('null').",
+    )
+
+    non_linear_solver: MultipoleSolveNonLinearSolver = Field(
+        default=MultipoleSolveNonLinearSolver(),
+        description="This dictionary contains the information about the parameters for the non-linear solver.",
+    )
+    # currently not needed since stationary only, we will be able to reuse it from the thermal solver
+    # time_stepping_parameters: MultipoleSolveTransientElectromagnetics = Field(
+    #     default=MultipoleSolveTransientElectromagnetics(),
+    #     description="This dictionary contains the information about the parameters for the transient solver.",
+    # )
+
+
+class MultipoleMeshThinShellApproximationParameters(BaseModel):
+    """
+    Level 4: Class for FiQuS Multipole
+    """
+    minimum_discretizations: Optional[int] = Field(
+        default=1,
+        description="It specifies the number of minimum spacial discretizations across a thin-shell.",
+    )
+    global_size_QH: Optional[float] = Field(
+        default=1e-4,
+        description="The thickness of the quench heater region is divided by this parameter to determine the number of spacial discretizations across the thin-shell.",
+    )
+    minimum_discretizations_QH: Optional[int] = Field(
+        default=1,
+        description="It specifies the number of minimum spacial discretizations across a thin-shell.",
+    )
+
+
+class MultipoleMeshThreshold(BaseModel):
+    """
+    Level 3: Class for FiQuS Multipole
+    """
+    enabled: Optional[bool] = Field(
+        default=False,
+        description="It determines whether the gmsh Field is enabled or not.",
+    )
+    SizeMin: Optional[float] = Field(
+        default=None,
+        description="It sets gmsh Mesh.MeshSizeMin.",
+    )
+    SizeMax: Optional[float] = Field(
+        default=None,
+        description="It sets gmsh Mesh.MeshSizeMax.",
+    )
+    DistMin: Optional[float] = Field(
+        default=None,
+        description="It sets gmsh Mesh.MeshDistMin.",
+    )
+    DistMax: Optional[float] = Field(
+        default=None,
+        description="It sets gmsh Mesh.MeshDistMax.",
+    )
+
+class MultipoleMeshTransfinite(BaseModel):
+    """
+    Level 3: Class for FiQuS Multipole
+    """
+    enabled_for: Literal[None, "curves", "curves_and_surfaces"] = Field(
+        default=None,
+        description="It determines on what entities the transfinite algorithm is applied.",
+    )
+    curve_target_size_height: Optional[float] = Field(
+        default=1.0,
+        description="The height of the region (short side) is divided by this parameter to determine the number of elements to apply via transfinite curves.",
+    )
+    curve_target_size_width: Optional[float] = Field(
+        default=1.0,
+        description="The width of the region (long side) is divided by this parameter to determine the number of elements to apply via transfinite curves.",
+    )
+class MultipoleMeshTransfiniteOrField(BaseModel):
+    """
+    Level 3: Class for FiQuS Multipole
+    """
+    transfinite: MultipoleMeshTransfinite = Field(
+        default=MultipoleMeshTransfinite(),
+        description="This dictionary contains the mesh information for transfinite curves.",
+    )
+    field: MultipoleMeshThreshold = Field(
+        default=MultipoleMeshThreshold(),
+        description="This dictionary contains the gmsh Field information.",
+    )
+
+class MultipolePostProcThermal(BaseModel):
+    """
+    Level 2: Class for FiQuS Multipole
+    """
+    output_time_steps_pos: Optional[Union[bool, int]] = Field(
+        default=True,
+        description="It determines whether the solution for the .pos file is saved for all time steps (True), none (False), or equidistant time steps (int).",
+    )
+    output_time_steps_txt: Optional[Union[bool, int]] = Field(
+        default=True,
+        description="It determines whether the solution for the .txt file is saved for all time steps (True), none (False), or equidistant time steps (int).",
+    )
+    save_pos_at_the_end: Optional[bool] = Field(
+        default=True,
+        description="It determines whether the solution for the .pos file is saved at the end of the simulation or during run time.",
+    )
+    save_txt_at_the_end: Optional[bool] = Field(
+        default=False,
+        description="It determines whether the solution for the .txt file is saved at the end of the simulation or during run time.",
+    )
+    take_average_conductor_temperature: Optional[bool] = Field(
+        default=True,
+        description="It determines whether the output files are based on the average conductor temperature or not (map2d).",
+    )
+    plot_all: Optional[Union[bool, None]] = Field(
+        default=False,
+        description="It determines whether the figures are generated and shown (true), generated only (null), or not generated (false). Useful for tests.",
+    )
+    variables: Optional[List[Literal["T", "jOverJc", "rho"]]] = Field(
+        default=["T"],
+        description="It specifies the physical quantity to be output.",
+    )
+    volumes: Optional[List[
+        Literal["omega", "powered", "induced", "iron", "conducting", "insulator"]]] = Field(
+        default=["powered"],
+        description="It specifies the regions associated with the physical quantity to be output.",
+    )
+
+
+class MultipolePostProcElectromagnetics(BaseModel):
+    """
+    Level 2: Class for FiQuS Multipole
+    """
+    output_time_steps_pos: Optional[Union[bool, int]] = Field(
+        default=True,
+        description="It determines whether the solution for the .pos file is saved for all time steps (True), none (False), or equidistant time steps (int).",
+    )
+    output_time_steps_txt: Optional[Union[bool, int]] = Field(
+        default=True,
+        description="It determines whether the solution for the .txt file is saved for all time steps (True), none (False), or equidistant time steps (int).",
+    )
+    save_pos_at_the_end: Optional[bool] = Field(
+        default=True,
+        description="It determines whether the solution for the .pos file is saved at the end of the simulation or during run time.",
+    )
+    save_txt_at_the_end: Optional[bool] = Field(
+        default=False,
+        description="It determines whether the solution for the .txt file is saved at the end of the simulation or during run time.",
+    )
+    compare_to_ROXIE: Optional[str] = Field(
+        default=None,
+        description="It contains the absolute path to a reference ROXIE map2d file. If provided, comparative plots with respect to the reference are generated.",
+    )
+    plot_all: Optional[Union[bool, None]] = Field(
+        default=False,
+        description="It determines whether the figures are generated and shown (true), generated only (null), or not generated (false). Useful for tests.",
+    )
+    variables: Optional[List[Literal["a", "az", "b", "h", "js"]]] = Field(
+        default=["b"],
+        description="It specifies the physical quantity to be output.",
+    )
+    volumes: Optional[List[
+        Literal["omega", "powered", "induced", "air", "air_far_field", "iron", "conducting", "insulator"]]] = Field(
+        default=["powered"],
+        description="It specifies the regions associated with the physical quantity to be output.",
+    )
+
+
+class MultipolePostProc(BaseModel):
+    """
+    Level 2: Class for FiQuS Multipole
+    """
+    electromagnetics: MultipolePostProcElectromagnetics = Field(
+        default=MultipolePostProcElectromagnetics(),
+        description="This dictionary contains the post-processing information for the electromagnetic solution.",
+    )
+    thermal: MultipolePostProcThermal = Field(
+        default=MultipolePostProcThermal(),
+        description="This dictionary contains the post-processing information for the thermal solution.",
+    )
+
+
+class MultipoleSolve(BaseModel):
+    """
+    Level 2: Class for FiQuS Multipole
+    """
+    electromagnetics: MultipoleSolveElectromagnetics = Field(
+        default=MultipoleSolveElectromagnetics(),
+        description="This dictionary contains the solver information for the electromagnetic solution.",
+    )
+    thermal: MultipoleSolveThermal = Field(
+        default=MultipoleSolveThermal(),
+        description="This dictionary contains the solver information for the thermal solution.",
+    )
+    wedges: MultipoleSolveWedge = Field(
+        default=MultipoleSolveWedge(),
+        description="This dictionary contains the material information of wedges.",
+    )
+    noOfMPITasks: Optional[Union[bool, int]] = Field(
+        default=False,
+        title="No. of tasks for MPI parallel run of GetDP",
+        description=(
+            "If integer, GetDP will be run in parallel using MPI. This is only valid"
+            " if MPI is installed on the system and an MPI-enabled GetDP is used." 
+            " If False, GetDP will be run in serial without invoking mpiexec."
+        ),
+    )
+
+class MultipoleThermalInsulationMesh(BaseModel):
+    """
+    Level 3: Class for FiQuS Multipole
+    """
+    global_size: float = Field(
+        default=1e-4,
+        description="It specifies the global size of the mesh for the insulation regions. It is enforced as a constant mesh field for surface insulation and by fixing the number of TSA layers for thin-shell approximation.",
+    )
+    TSA: Optional[MultipoleMeshThinShellApproximationParameters] = Field(
+        default=MultipoleMeshThinShellApproximationParameters(),
+        description="This dictionary contains the mesh information for thin-shells.",
+    )
+    
+class MultipoleMeshThermal(BaseModel):
+    """
+    Level 2: Class for FiQuS Multipole
+    """
+    create: bool = Field(
+        default=True,
+        description="It determines whether the thermal mesh is built or not.",
+    )
+    conductors: Optional[MultipoleMeshTransfiniteOrField] = Field(
+        default=MultipoleMeshTransfiniteOrField(),
+        description="This dictionary contains the mesh information for the conductor regions.",
+    )
+    wedges: Optional[MultipoleMeshTransfiniteOrField] = Field(
+        default=MultipoleMeshTransfiniteOrField(),
+        description="This dictionary contains the mesh information for the wedge regions.",
+    )
+    iron_field: Optional[MultipoleMeshThreshold] = Field(
+        default=MultipoleMeshThreshold(),
+        description="This dictionary contains the gmsh Field information for the iron yoke region.",
+    )
+    insulation: Optional[MultipoleThermalInsulationMesh] = Field(
+        default=MultipoleThermalInsulationMesh(),
+        description="This dictionary contains the mesh information for the insulation regions.",
+    )
+   
+    iron_field: Optional[MultipoleMeshThreshold] = Field(
+        default=MultipoleMeshThreshold(),
+        description="This dictionary contains the gmsh Field information for the iron yoke region.",
+    )
+
+    isothermal_conductors: Optional[bool] = Field(
+        default=False,
+        description="It determines whether the conductors are considered isothermal or not using getDP constraints.",
+    )
+    isothermal_wedges: Optional[bool] = Field(
+        default=False,
+        description="It determines whether the wedges are considered isothermal or not using getDP Link constraints.",
+    )
+
+class MultipoleMeshElectromagnetics(BaseModel):
+    """
+    Level 2: Class for FiQuS Multipole
+    """
+    create: bool = Field(
+        default=True,
+        description="It determines whether the electromagnetic mesh is built or not.",
+    )
+    conductors: Optional[MultipoleMeshTransfiniteOrField] = Field(
+        default=MultipoleMeshTransfiniteOrField(),
+        description="This dictionary contains the mesh information for the conductor regions.",
+    )
+    wedges: Optional[MultipoleMeshTransfiniteOrField] = Field(
+        default=MultipoleMeshTransfiniteOrField(),
+        description="This dictionary contains the mesh information for the wedge regions.",
+    )
+    iron_field: Optional[MultipoleMeshThreshold] = Field(
+        default=MultipoleMeshThreshold(),
+        description="This dictionary contains the gmsh Field information for the iron yoke region.",
+    )
+    bore_field: Optional[MultipoleMeshThreshold] = Field(
+        default=MultipoleMeshThreshold(),
+        description="This dictionary contains the gmsh Field information for the bore region.",
+    )
+
+class MultipoleMesh(BaseModel):
+    """
+    Level 2: Class for FiQuS Multipole
+    """
+    electromagnetics: MultipoleMeshElectromagnetics = Field(
+        default=MultipoleMeshElectromagnetics(),
+        description="This dictionary contains the mesh information for the electromagnetic solution.",
+    )
+    thermal: MultipoleMeshThermal = Field(
+        default=MultipoleMeshThermal(),
+        description="This dictionary contains the mesh information for the thermal solution.",
+    )
+
+
+class MultipoleGeometryThermal(BaseModel):
+    """
+    Level 2: Class for FiQuS Multipole
+    """
+    create: bool = Field(
+        default=True,
+        description="It determines whether the thermal geometry is built or not.",
+    )
+    with_iron_yoke: Optional[bool] = Field(
+        default=False,
+        description="It determines whether the iron yoke region is built or not.",
+    )
+    with_wedges: Optional[bool] = Field(
+        default=True,
+        description="It determines whether the wedge regions are built or not.",
+    )
+    use_TSA: Optional[bool] = Field(
+        default=False,
+        description="It determines whether the insulation regions are explicitly built or modeled via thin-shell approximation.",
+    )
+    correct_block_coil_tsa_checkered_scheme: Optional[bool] = Field(
+        default=False,
+        description="There is a bug in the TSA naming scheme for block coils, this flag activates a simple (not clean) bug fix that will be replaced in a future version.",
+    )
+
+class MultipoleGeometryElectromagnetics(BaseModel):
+    """
+    Level 2: Class for FiQuS Multipole
+    """
+    create: bool = Field(
+        default=True,
+        description="It determines whether the electromagnetic geometry is built or not.",
+    )
+    with_iron_yoke: Optional[bool] = Field(
+        default=True,
+        description="It determines whether the iron yoke region is built or not.",
+    )
+    with_wedges: Optional[bool] = Field(
+        default=True,
+        description="It determines whether the wedge regions are built or not.",
+    )
+    symmetry: Optional[Literal["none", "xy", "x", "y"]] = Field(
+        default='none',
+        description="It determines the model regions to build according to the specified axis/axes.",
+    )
+
+
+class MultipoleGeometry(BaseModel):
+    """
+    Level 2: Class for FiQuS Multipole
+    """
+    geom_file_path: Optional[str] = Field(
+        default=None,
+        description="It contains the path to a .geom file. If null, the default .geom file produced by steam-sdk BuilderFiQuS will be used.",
+    )
+    plot_preview: Optional[bool] = Field(
+        default=False,
+        description="If true, it displays matplotlib figures of the magnet geometry with relevant information (e.g., conductor and block numbers).",
+    )
+    electromagnetics: MultipoleGeometryElectromagnetics = Field(
+        default=MultipoleGeometryElectromagnetics(),
+        description="This dictionary contains the geometry information for the electromagnetic solution.",
+    )
+    thermal: MultipoleGeometryThermal = Field(
+        default=MultipoleGeometryThermal(),
+        description="This dictionary contains the geometry information for the thermal solution.",
+    )
+
+
+class Multipole(BaseModel):
+    """
+    Level 1: Class for FiQuS Multipole
+    """
+    type: Literal["multipole"] = "multipole"
+    geometry: MultipoleGeometry = Field(
+        default=MultipoleGeometry(),
+        description="This dictionary contains the geometry information.",
+    )
+    mesh: MultipoleMesh = Field(
+        default=MultipoleMesh(),
+        description="This dictionary contains the mesh information.",
+    )
+    solve: MultipoleSolve = Field(
+        default=MultipoleSolve(),
+        description="This dictionary contains the solution information.",
+    )
+    postproc: MultipolePostProc = Field(
+        default=MultipolePostProc(),
+        description="This dictionary contains the post-process information.",
+    )