fake-bpy-module 20241207__py3-none-any.whl → 20241209__py3-none-any.whl

bmesh/ops/__init__.pyi

@@ -37,7 +37,7 @@ def beautify_fill(
     edges: list[bmesh.types.BMEdge] = [],
     use_restrict_tag: bool = False,
     method: typing.Literal["AREA", "ANGLE"] = "AREA",
-):
+) -> dict[str, typing.Any]:
     """Beautify Fill.Rotate edges to create more evenly spaced triangles.
 
         :param bm: The bmesh to operate on.
@@ -53,6 +53,7 @@ def beautify_fill(
         :return: geom: new flipped faces and edges
 
     type list of (`bmesh.types.BMVert`, `bmesh.types.BMEdge`, `bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def bevel(
@@ -80,7 +81,7 @@ def bevel(
     spread: float = 0,
     custom_profile: bpy.types.bpy_struct | None = None,
     vmesh_method: typing.Literal["ADJ", "CUTOFF"] = "ADJ",
-):
+) -> dict[str, typing.Any]:
     """Bevel.Bevels edges and vertices
 
         :param bm: The bmesh to operate on.
@@ -134,6 +135,7 @@ def bevel(
     verts: output verts
 
     type list of (`bmesh.types.BMVert`)
+        :rtype: dict[str, typing.Any]
     """
 
 def bisect_edges(
@@ -141,7 +143,7 @@ def bisect_edges(
     edges: list[bmesh.types.BMEdge] = [],
     cuts: int = 0,
     edge_percents={},
-):
+) -> dict[str, typing.Any]:
     """Edge Bisect.Splits input edges (but doesn't do anything else).
     This creates a 2-valence vert.
 
@@ -155,6 +157,7 @@ def bisect_edges(
         :return: geom_split: newly created vertices and edges
 
     type list of (`bmesh.types.BMVert`, `bmesh.types.BMEdge`, `bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def bisect_plane(
@@ -168,7 +171,7 @@ def bisect_plane(
     use_snap_center: bool = False,
     clear_outer: bool = False,
     clear_inner: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Bisect Plane.Bisects the mesh by a plane (cut the mesh in half).
 
         :param bm: The bmesh to operate on.
@@ -194,6 +197,7 @@ def bisect_plane(
     geom: input and output geometry (result of cut).
 
     type list of (`bmesh.types.BMVert`, `bmesh.types.BMEdge`, `bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def bmesh_to_mesh(
@@ -217,7 +221,7 @@ def bridge_loops(
     use_merge: bool = False,
     merge_factor: float = 0,
     twist_offset: int = 0,
-):
+) -> dict[str, typing.Any]:
     """Bridge edge loops with faces.
 
         :param bm: The bmesh to operate on.
@@ -241,6 +245,7 @@ def bridge_loops(
     edges: new edges
 
     type list of (`bmesh.types.BMEdge`)
+        :rtype: dict[str, typing.Any]
     """
 
 def collapse(
@@ -270,7 +275,7 @@ def connect_vert_pair(
     verts: list[bmesh.types.BMVert] = [],
     verts_exclude: list[bmesh.types.BMVert] = [],
     faces_exclude: list[bmesh.types.BMFace] = [],
-):
+) -> dict[str, typing.Any]:
     """Connect Verts.Split faces by adding edges that connect verts.
 
         :param bm: The bmesh to operate on.
@@ -284,6 +289,7 @@ def connect_vert_pair(
         :return: edges:
 
     type list of (`bmesh.types.BMEdge`)
+        :rtype: dict[str, typing.Any]
     """
 
 def connect_verts(
@@ -291,7 +297,7 @@ def connect_verts(
     verts: list[bmesh.types.BMVert] = [],
     faces_exclude: list[bmesh.types.BMFace] = [],
     check_degenerate: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Connect Verts.Split faces by adding edges that connect verts.
 
         :param bm: The bmesh to operate on.
@@ -305,9 +311,12 @@ def connect_verts(
         :return: edges:
 
     type list of (`bmesh.types.BMEdge`)
+        :rtype: dict[str, typing.Any]
     """
 
-def connect_verts_concave(bm: bmesh.types.BMesh, faces: list[bmesh.types.BMFace] = []):
+def connect_verts_concave(
+    bm: bmesh.types.BMesh, faces: list[bmesh.types.BMFace] = []
+) -> dict[str, typing.Any]:
     """Connect Verts to form Convex Faces.Ensures all faces are convex faces.
 
         :param bm: The bmesh to operate on.
@@ -321,11 +330,12 @@ def connect_verts_concave(bm: bmesh.types.BMesh, faces: list[bmesh.types.BMFace]
     faces:
 
     type list of (`bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def connect_verts_nonplanar(
     bm: bmesh.types.BMesh, angle_limit: float = 0, faces: list[bmesh.types.BMFace] = []
-):
+) -> dict[str, typing.Any]:
     """Connect Verts Across non Planer Faces.Split faces by connecting edges along non planer faces.
 
         :param bm: The bmesh to operate on.
@@ -341,6 +351,7 @@ def connect_verts_nonplanar(
     faces:
 
     type list of (`bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def contextual_create(
@@ -350,7 +361,7 @@ def contextual_create(
     | list[bmesh.types.BMVert] = [],
     mat_nr: int = 0,
     use_smooth: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Contextual Create.This is basically F-key, it creates
     new faces from vertices, makes stuff from edge nets,
     makes wire edges, etc. It also dissolves faces.Three verts become a triangle, four become a quad. Two
@@ -371,6 +382,7 @@ def contextual_create(
     edges: newly-made edge(s)
 
     type list of (`bmesh.types.BMEdge`)
+        :rtype: dict[str, typing.Any]
     """
 
 def convex_hull(
@@ -379,7 +391,7 @@ def convex_hull(
     | list[bmesh.types.BMFace]
     | list[bmesh.types.BMVert] = [],
     use_existing_faces: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Convex HullBuilds a convex hull from the vertices in 'input'.If 'use_existing_faces' is true, the hull will not output triangles
     that are covered by a pre-existing face.All hull vertices, faces, and edges are added to 'geom.out'. Any
     input elements that end up inside the hull (i.e. are not used by an
@@ -409,6 +421,7 @@ def convex_hull(
     geom_holes:
 
     type list of (`bmesh.types.BMVert`, `bmesh.types.BMEdge`, `bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def create_circle(
@@ -420,7 +433,7 @@ def create_circle(
     matrix: collections.abc.Sequence[collections.abc.Sequence[float]]
     | mathutils.Matrix = mathutils.Matrix.Identity(4),
     calc_uvs: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Creates a Circle.
 
         :param bm: The bmesh to operate on.
@@ -440,6 +453,7 @@ def create_circle(
         :return: verts: output verts
 
     type list of (`bmesh.types.BMVert`)
+        :rtype: dict[str, typing.Any]
     """
 
 def create_cone(
@@ -453,7 +467,7 @@ def create_cone(
     matrix: collections.abc.Sequence[collections.abc.Sequence[float]]
     | mathutils.Matrix = mathutils.Matrix.Identity(4),
     calc_uvs: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Create Cone.Creates a cone with variable depth at both ends
 
         :param bm: The bmesh to operate on.
@@ -477,6 +491,7 @@ def create_cone(
         :return: verts: output verts
 
     type list of (`bmesh.types.BMVert`)
+        :rtype: dict[str, typing.Any]
     """
 
 def create_cube(
@@ -485,7 +500,7 @@ def create_cube(
     matrix: collections.abc.Sequence[collections.abc.Sequence[float]]
     | mathutils.Matrix = mathutils.Matrix.Identity(4),
     calc_uvs: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Create CubeCreates a cube.
 
         :param bm: The bmesh to operate on.
@@ -499,6 +514,7 @@ def create_cube(
         :return: verts: output verts
 
     type list of (`bmesh.types.BMVert`)
+        :rtype: dict[str, typing.Any]
     """
 
 def create_grid(
@@ -509,7 +525,7 @@ def create_grid(
     matrix: collections.abc.Sequence[collections.abc.Sequence[float]]
     | mathutils.Matrix = mathutils.Matrix.Identity(4),
     calc_uvs: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Create Grid.Creates a grid with a variable number of subdivisions
 
         :param bm: The bmesh to operate on.
@@ -527,6 +543,7 @@ def create_grid(
         :return: verts: output verts
 
     type list of (`bmesh.types.BMVert`)
+        :rtype: dict[str, typing.Any]
     """
 
 def create_icosphere(
@@ -536,7 +553,7 @@ def create_icosphere(
     matrix: collections.abc.Sequence[collections.abc.Sequence[float]]
     | mathutils.Matrix = mathutils.Matrix.Identity(4),
     calc_uvs: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Create Ico-Sphere.Creates a grid with a variable number of subdivisions
 
         :param bm: The bmesh to operate on.
@@ -552,6 +569,7 @@ def create_icosphere(
         :return: verts: output verts
 
     type list of (`bmesh.types.BMVert`)
+        :rtype: dict[str, typing.Any]
     """
 
 def create_monkey(
@@ -559,7 +577,7 @@ def create_monkey(
     matrix: collections.abc.Sequence[collections.abc.Sequence[float]]
     | mathutils.Matrix = mathutils.Matrix.Identity(4),
     calc_uvs: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Create Suzanne.Creates a monkey (standard blender primitive).
 
         :param bm: The bmesh to operate on.
@@ -571,6 +589,7 @@ def create_monkey(
         :return: verts: output verts
 
     type list of (`bmesh.types.BMVert`)
+        :rtype: dict[str, typing.Any]
     """
 
 def create_uvsphere(
@@ -581,7 +600,7 @@ def create_uvsphere(
     matrix: collections.abc.Sequence[collections.abc.Sequence[float]]
     | mathutils.Matrix = mathutils.Matrix.Identity(4),
     calc_uvs: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Create UV Sphere.Creates a grid with a variable number of subdivisions
 
         :param bm: The bmesh to operate on.
@@ -599,12 +618,13 @@ def create_uvsphere(
         :return: verts: output verts
 
     type list of (`bmesh.types.BMVert`)
+        :rtype: dict[str, typing.Any]
     """
 
 def create_vert(
     bm: bmesh.types.BMesh,
     co: collections.abc.Sequence[float] | mathutils.Vector = mathutils.Vector(),
-):
+) -> dict[str, typing.Any]:
     """Make Vertex.Creates a single vertex; this BMOP was necessary
     for click-create-vertex.
 
@@ -615,6 +635,7 @@ def create_vert(
         :return: vert: the new vert
 
     type list of (`bmesh.types.BMVert`)
+        :rtype: dict[str, typing.Any]
     """
 
 def delete(
@@ -660,7 +681,7 @@ def dissolve_edges(
     edges: list[bmesh.types.BMEdge] = [],
     use_verts: bool = False,
     use_face_split: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Dissolve Edges.
 
         :param bm: The bmesh to operate on.
@@ -674,11 +695,12 @@ def dissolve_edges(
         :return: region:
 
     type list of (`bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def dissolve_faces(
     bm: bmesh.types.BMesh, faces: list[bmesh.types.BMFace] = [], use_verts: bool = False
-):
+) -> dict[str, typing.Any]:
     """Dissolve Faces.
 
         :param bm: The bmesh to operate on.
@@ -690,6 +712,7 @@ def dissolve_faces(
         :return: region:
 
     type list of (`bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def dissolve_limit(
@@ -699,7 +722,7 @@ def dissolve_limit(
     verts: list[bmesh.types.BMVert] = [],
     edges: list[bmesh.types.BMEdge] = [],
     delimit=set(),
-):
+) -> dict[str, typing.Any]:
     """Limited Dissolve.Dissolve planar faces and co-linear edges.
 
         :param bm: The bmesh to operate on.
@@ -716,6 +739,7 @@ def dissolve_limit(
         :return: region:
 
     type list of (`bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def dissolve_verts(
@@ -744,7 +768,7 @@ def duplicate(
     dest: bmesh.types.BMesh | None = None,
     use_select_history: bool = False,
     use_edge_flip_from_face: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Duplicate Geometry.Utility operator to duplicate geometry,
     optionally into a destination mesh.
 
@@ -785,6 +809,7 @@ def duplicate(
     isovert_map:
 
     type dict mapping vert/edge/face types to `bmesh.types.BMVert`/`bmesh.types.BMEdge`/`bmesh.types.BMFace`
+        :rtype: dict[str, typing.Any]
     """
 
 def edgeloop_fill(
@@ -792,7 +817,7 @@ def edgeloop_fill(
     edges: list[bmesh.types.BMEdge] = [],
     mat_nr: int = 0,
     use_smooth: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Edge Loop Fill.Create faces defined by one or more non overlapping edge loops.
 
         :param bm: The bmesh to operate on.
@@ -806,6 +831,7 @@ def edgeloop_fill(
         :return: faces: new faces
 
     type list of (`bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def edgenet_fill(
@@ -814,7 +840,7 @@ def edgenet_fill(
     mat_nr: int = 0,
     use_smooth: bool = False,
     sides: int = 0,
-):
+) -> dict[str, typing.Any]:
     """Edge Net Fill.Create faces defined by enclosed edges.
 
         :param bm: The bmesh to operate on.
@@ -830,9 +856,12 @@ def edgenet_fill(
         :return: faces: new faces
 
     type list of (`bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
-def edgenet_prepare(bm: bmesh.types.BMesh, edges: list[bmesh.types.BMEdge] = []):
+def edgenet_prepare(
+    bm: bmesh.types.BMesh, edges: list[bmesh.types.BMEdge] = []
+) -> dict[str, typing.Any]:
     """Edge-net Prepare.Identifies several useful edge loop cases and modifies them so
     they'll become a face when edgenet_fill is called. The cases covered are:
 
@@ -843,6 +872,7 @@ def edgenet_prepare(bm: bmesh.types.BMesh, edges: list[bmesh.types.BMEdge] = [])
         :return: edges: new edges
 
     type list of (`bmesh.types.BMEdge`)
+        :rtype: dict[str, typing.Any]
     """
 
 def extrude_discrete_faces(
@@ -850,7 +880,7 @@ def extrude_discrete_faces(
     faces: list[bmesh.types.BMFace] = [],
     use_normal_flip: bool = False,
     use_select_history: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Individual Face Extrude.Extrudes faces individually.
 
         :param bm: The bmesh to operate on.
@@ -864,6 +894,7 @@ def extrude_discrete_faces(
         :return: faces: output faces
 
     type list of (`bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def extrude_edge_only(
@@ -871,7 +902,7 @@ def extrude_edge_only(
     edges: list[bmesh.types.BMEdge] = [],
     use_normal_flip: bool = False,
     use_select_history: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Extrude Only Edges.Extrudes Edges into faces, note that this is very simple, there's no fancy
     winged extrusion.
 
@@ -886,6 +917,7 @@ def extrude_edge_only(
         :return: geom: output geometry
 
     type list of (`bmesh.types.BMVert`, `bmesh.types.BMEdge`, `bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def extrude_face_region(
@@ -899,7 +931,7 @@ def extrude_face_region(
     use_normal_from_adjacent: bool = False,
     use_dissolve_ortho_edges: bool = False,
     use_select_history: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Extrude Faces.Extrude operator (does not transform)
 
         :param bm: The bmesh to operate on.
@@ -920,13 +952,14 @@ def extrude_face_region(
         :return: geom:
 
     type list of (`bmesh.types.BMVert`, `bmesh.types.BMEdge`, `bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def extrude_vert_indiv(
     bm: bmesh.types.BMesh,
     verts: list[bmesh.types.BMVert] = [],
     use_select_history: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Individual Vertex Extrude.Extrudes wire edges from vertices.
 
         :param bm: The bmesh to operate on.
@@ -942,6 +975,7 @@ def extrude_vert_indiv(
     verts: output vertices
 
     type list of (`bmesh.types.BMVert`)
+        :rtype: dict[str, typing.Any]
     """
 
 def face_attribute_fill(
@@ -949,7 +983,7 @@ def face_attribute_fill(
     faces: list[bmesh.types.BMFace] = [],
     use_normals: bool = False,
     use_data: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Face Attribute Fill.Fill in faces with data from adjacent faces.
 
         :param bm: The bmesh to operate on.
@@ -963,6 +997,7 @@ def face_attribute_fill(
         :return: faces_fail: faces that could not be handled
 
     type list of (`bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def find_doubles(
@@ -970,7 +1005,7 @@ def find_doubles(
     verts: list[bmesh.types.BMVert] = [],
     keep_verts: list[bmesh.types.BMVert] = [],
     dist: float = 0,
-):
+) -> dict[str, typing.Any]:
     """Find Doubles.Takes input verts and find vertices they should weld to.
     Outputs a mapping slot suitable for use with the weld verts BMOP.If keep_verts is used, vertices outside that set can only be merged
     with vertices in that set.
@@ -986,6 +1021,7 @@ def find_doubles(
         :return: targetmap:
 
     type dict mapping vert/edge/face types to `bmesh.types.BMVert`/`bmesh.types.BMEdge`/`bmesh.types.BMFace`
+        :rtype: dict[str, typing.Any]
     """
 
 def flip_quad_tessellation(bm: bmesh.types.BMesh, faces: list[bmesh.types.BMFace] = []):
@@ -1003,7 +1039,7 @@ def grid_fill(
     mat_nr: int = 0,
     use_smooth: bool = False,
     use_interp_simple: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Grid Fill.Create faces defined by 2 disconnected edge loops (which share edges).
 
         :param bm: The bmesh to operate on.
@@ -1019,11 +1055,12 @@ def grid_fill(
         :return: faces: new faces
 
     type list of (`bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def holes_fill(
     bm: bmesh.types.BMesh, edges: list[bmesh.types.BMEdge] = [], sides: int = 0
-):
+) -> dict[str, typing.Any]:
     """Fill Holes.Fill boundary edges with faces, copying surrounding customdata.
 
         :param bm: The bmesh to operate on.
@@ -1035,6 +1072,7 @@ def holes_fill(
         :return: faces: new faces
 
     type list of (`bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def inset_individual(
@@ -1045,7 +1083,7 @@ def inset_individual(
     use_even_offset: bool = False,
     use_interpolate: bool = False,
     use_relative_offset: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Face Inset (Individual).Insets individual faces.
 
         :param bm: The bmesh to operate on.
@@ -1065,6 +1103,7 @@ def inset_individual(
         :return: faces: output faces
 
     type list of (`bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def inset_region(
@@ -1079,7 +1118,7 @@ def inset_region(
     thickness: float = 0,
     depth: float = 0,
     use_outset: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Face Inset (Regions).Inset or outset face regions.
 
         :param bm: The bmesh to operate on.
@@ -1107,6 +1146,7 @@ def inset_region(
         :return: faces: output faces
 
     type list of (`bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def join_triangles(
@@ -1123,7 +1163,7 @@ def join_triangles(
     deselect_joined: bool = False,
     merge_limit: int = 0,
     neighbor_debug: int = 0,
-):
+) -> dict[str, typing.Any]:
     """Join Triangles.Tries to intelligently join triangles according
     to angle threshold and delimiters.
 
@@ -1156,6 +1196,7 @@ def join_triangles(
         :return: faces: joined faces
 
     type list of (`bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def mesh_to_bmesh(
@@ -1190,7 +1231,7 @@ def mirror(
     mirror_v: bool = False,
     mirror_udim: bool = False,
     use_shapekey: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Mirror.Mirrors geometry along an axis. The resulting geometry is welded on using
     merge_dist. Pairs of original/mirrored vertices are welded using the merge_dist
     parameter (which defines the minimum distance for welding to happen).
@@ -1216,6 +1257,7 @@ def mirror(
         :return: geom: output geometry, mirrored
 
     type list of (`bmesh.types.BMVert`, `bmesh.types.BMEdge`, `bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def object_load_bmesh(
@@ -1236,7 +1278,7 @@ def offset_edgeloops(
     bm: bmesh.types.BMesh,
     edges: list[bmesh.types.BMEdge] = [],
     use_cap_endpoint: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Edge-loop Offset.Creates edge loops based on simple edge-outset method.
 
         :param bm: The bmesh to operate on.
@@ -1248,6 +1290,7 @@ def offset_edgeloops(
         :return: edges: output edges
 
     type list of (`bmesh.types.BMEdge`)
+        :rtype: dict[str, typing.Any]
     """
 
 def planar_faces(
@@ -1255,7 +1298,7 @@ def planar_faces(
     faces: list[bmesh.types.BMFace] = [],
     iterations: int = 0,
     factor: float = 0,
-):
+) -> dict[str, typing.Any]:
     """Planar Faces.Iteratively flatten faces.
 
         :param bm: The bmesh to operate on.
@@ -1269,6 +1312,7 @@ def planar_faces(
         :return: geom: output slot, computed boundary geometry.
 
     type list of (`bmesh.types.BMVert`, `bmesh.types.BMEdge`, `bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def pointmerge(
@@ -1307,7 +1351,7 @@ def poke(
     offset: float = 0,
     center_mode: typing.Literal["MEAN_WEIGHTED", "MEAN", "BOUNDS"] = "MEAN_WEIGHTED",
     use_relative_offset: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Pokes a face.Splits a face into a triangle fan.
 
         :param bm: The bmesh to operate on.
@@ -1327,6 +1371,7 @@ def poke(
     faces: output faces
 
     type list of (`bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def recalc_face_normals(bm: bmesh.types.BMesh, faces: list[bmesh.types.BMFace] = []):
@@ -1346,7 +1391,7 @@ def region_extend(
     use_contract: bool = False,
     use_faces: bool = False,
     use_face_step: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Region Extend.used to implement the select more/less tools.
     this puts some geometry surrounding regions of
     geometry in geom into geom.out.if use_faces is 0 then geom.out spits out verts and edges,
@@ -1365,6 +1410,7 @@ def region_extend(
         :return: geom: output slot, computed boundary geometry.
 
     type list of (`bmesh.types.BMVert`, `bmesh.types.BMEdge`, `bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def remove_doubles(
@@ -1465,7 +1511,7 @@ def rotate_colors(
 
 def rotate_edges(
     bm: bmesh.types.BMesh, edges: list[bmesh.types.BMEdge] = [], use_ccw: bool = False
-):
+) -> dict[str, typing.Any]:
     """Edge Rotate.Rotates edges topologically. Also known as "spin edge" to some people.
     Simple example: [/] becomes [|] then [].
 
@@ -1478,6 +1524,7 @@ def rotate_edges(
         :return: edges: newly spun edges
 
     type list of (`bmesh.types.BMEdge`)
+        :rtype: dict[str, typing.Any]
     """
 
 def rotate_uvs(
@@ -1588,7 +1635,7 @@ def solidify(
     | list[bmesh.types.BMFace]
     | list[bmesh.types.BMVert] = [],
     thickness: float = 0,
-):
+) -> dict[str, typing.Any]:
     """Solidify.Turns a mesh into a shell with thickness
 
         :param bm: The bmesh to operate on.
@@ -1600,6 +1647,7 @@ def solidify(
         :return: geom:
 
     type list of (`bmesh.types.BMVert`, `bmesh.types.BMEdge`, `bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def spin(
@@ -1617,7 +1665,7 @@ def spin(
     use_merge: bool = False,
     use_normal_flip: bool = False,
     use_duplicate: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Spin.Extrude or duplicate geometry a number of times,
     rotating and possibly translating after each step
 
@@ -1646,6 +1694,7 @@ def spin(
         :return: geom_last: result of last step
 
     type list of (`bmesh.types.BMVert`, `bmesh.types.BMEdge`, `bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def split(
@@ -1655,7 +1704,7 @@ def split(
     | list[bmesh.types.BMVert] = [],
     dest: bmesh.types.BMesh | None = None,
     use_only_faces: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Split Off Geometry.Disconnect geometry from adjacent edges and faces,
     optionally into a destination mesh.
 
@@ -1678,6 +1727,7 @@ def split(
     isovert_map:
 
     type dict mapping vert/edge/face types to `bmesh.types.BMVert`/`bmesh.types.BMEdge`/`bmesh.types.BMFace`
+        :rtype: dict[str, typing.Any]
     """
 
 def split_edges(
@@ -1685,7 +1735,7 @@ def split_edges(
     edges: list[bmesh.types.BMEdge] = [],
     verts: list[bmesh.types.BMVert] = [],
     use_verts: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Edge Split.Disconnects faces along input edges.
 
         :param bm: The bmesh to operate on.
@@ -1699,6 +1749,7 @@ def split_edges(
         :return: edges: old output disconnected edges
 
     type list of (`bmesh.types.BMEdge`)
+        :rtype: dict[str, typing.Any]
     """
 
 def subdivide_edgering(
@@ -1711,7 +1762,7 @@ def subdivide_edgering(
         "SMOOTH", "SPHERE", "ROOT", "SHARP", "LINEAR", "INVERSE_SQUARE"
     ] = "SMOOTH",
     profile_shape_factor: float = 0,
-):
+) -> dict[str, typing.Any]:
     """Subdivide Edge-Ring.Take an edge-ring, and subdivide with interpolation options.
 
         :param bm: The bmesh to operate on.
@@ -1731,6 +1782,7 @@ def subdivide_edgering(
         :return: faces: output faces
 
     type list of (`bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def subdivide_edges(
@@ -1754,7 +1806,7 @@ def subdivide_edges(
     use_only_quads: bool = False,
     use_sphere: bool = False,
     use_smooth_even: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Subdivide Edges.Advanced operator for subdividing edges
     with options for face patterns, smoothing and randomization.
 
@@ -1799,6 +1851,7 @@ def subdivide_edges(
     geom: contains all output geometry
 
     type list of (`bmesh.types.BMVert`, `bmesh.types.BMEdge`, `bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def symmetrize(
@@ -1809,7 +1862,7 @@ def symmetrize(
     direction: typing.Literal["-X", "-Y", "-Z", "X", "Y", "Z"] = "-X",
     dist: float = 0,
     use_shapekey: bool = False,
-):
+) -> dict[str, typing.Any]:
     """Symmetrize.Makes the mesh elements in the "input" slot symmetrical. Unlike
     normal mirroring, it only copies in one direction, as specified by
     the "direction" slot. The edges and faces that cross the plane of
@@ -1828,6 +1881,7 @@ def symmetrize(
         :return: geom:
 
     type list of (`bmesh.types.BMVert`, `bmesh.types.BMEdge`, `bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def transform(
@@ -1882,7 +1936,7 @@ def triangle_fill(
     use_dissolve: bool = False,
     edges: list[bmesh.types.BMEdge] = [],
     normal: collections.abc.Sequence[float] | mathutils.Vector = mathutils.Vector(),
-):
+) -> dict[str, typing.Any]:
     """Triangle Fill.Fill edges with triangles
 
         :param bm: The bmesh to operate on.
@@ -1898,6 +1952,7 @@ def triangle_fill(
         :return: geom: new faces and edges
 
     type list of (`bmesh.types.BMVert`, `bmesh.types.BMEdge`, `bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """
 
 def triangulate(
@@ -1907,7 +1962,7 @@ def triangulate(
         "BEAUTY", "FIXED", "ALTERNATE", "SHORT_EDGE", "LONG_EDGE"
     ] = "BEAUTY",
     ngon_method: typing.Literal["BEAUTY", "EAR_CLIP"] = "BEAUTY",
-):
+) -> dict[str, typing.Any]:
     """Triangulate.
 
         :param bm: The bmesh to operate on.
@@ -1933,6 +1988,7 @@ def triangulate(
     face_map_double: duplicate faces
 
     type dict mapping vert/edge/face types to `bmesh.types.BMVert`/`bmesh.types.BMEdge`/`bmesh.types.BMFace`
+        :rtype: dict[str, typing.Any]
     """
 
 def unsubdivide(
@@ -1970,7 +2026,7 @@ def wireframe(
     crease_weight: float = 0,
     use_relative_offset: bool = False,
     material_offset: int = 0,
-):
+) -> dict[str, typing.Any]:
     """Wire Frame.Makes a wire-frame copy of faces.
 
         :param bm: The bmesh to operate on.
@@ -1998,4 +2054,5 @@ def wireframe(
         :return: faces: output faces
 
     type list of (`bmesh.types.BMFace`)
+        :rtype: dict[str, typing.Any]
     """