fake-bpy-module 20240803__py3-none-any.whl → 20240805__py3-none-any.whl

bpy/ops/action/__init__.pyi

@@ -150,7 +150,7 @@ def easing_type(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    type: str | None = "AUTO",
+    type: typing.Literal["AUTO", "EASE_IN", "EASE_OUT", "EASE_IN_OUT"] | None = "AUTO",
 ):
     """Set easing type for the F-Curve segments starting from the selected keyframes
 
@@ -158,7 +158,7 @@ def easing_type(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param type: Type
-    :type type: str | None
+    :type type: typing.Literal['AUTO', 'EASE_IN', 'EASE_OUT', 'EASE_IN_OUT'] | None
     """
 
     ...
@@ -168,7 +168,8 @@ def extrapolation_type(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    type: str | None = "CONSTANT",
+    type: typing.Literal["CONSTANT", "LINEAR", "MAKE_CYCLIC", "CLEAR_CYCLIC"]
+    | None = "CONSTANT",
 ):
     """Set extrapolation mode for selected F-Curves
 
@@ -188,7 +189,7 @@ def extrapolation_type(
 
     CLEAR_CYCLIC
     Clear Cyclic (F-Modifier) -- Remove Cycles F-Modifier if not needed anymore.
-        :type type: str | None
+        :type type: typing.Literal['CONSTANT','LINEAR','MAKE_CYCLIC','CLEAR_CYCLIC'] | None
     """
 
     ...
@@ -212,7 +213,8 @@ def handle_type(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    type: str | None = "FREE",
+    type: typing.Literal["FREE", "ALIGNED", "VECTOR", "AUTO", "AUTO_CLAMPED"]
+    | None = "FREE",
 ):
     """Set type of handle for selected keyframes
 
@@ -220,7 +222,7 @@ def handle_type(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param type: Type
-    :type type: str | None
+    :type type: typing.Literal['FREE', 'ALIGNED', 'VECTOR', 'AUTO', 'AUTO_CLAMPED'] | None
     """
 
     ...
@@ -230,7 +232,22 @@ def interpolation_type(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    type: str | None = "CONSTANT",
+    type: typing.Literal[
+        "CONSTANT",
+        "LINEAR",
+        "BEZIER",
+        "SINE",
+        "QUAD",
+        "CUBIC",
+        "QUART",
+        "QUINT",
+        "EXPO",
+        "CIRC",
+        "BACK",
+        "BOUNCE",
+        "ELASTIC",
+    ]
+    | None = "CONSTANT",
 ):
     """Set interpolation mode for the F-Curve segments starting from the selected keyframes
 
@@ -238,7 +255,7 @@ def interpolation_type(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param type: Type
-    :type type: str | None
+    :type type: typing.Literal['CONSTANT', 'LINEAR', 'BEZIER', 'SINE', 'QUAD', 'CUBIC', 'QUART', 'QUINT', 'EXPO', 'CIRC', 'BACK', 'BOUNCE', 'ELASTIC'] | None
     """
 
     ...
@@ -248,7 +265,7 @@ def keyframe_insert(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    type: str | None = "ALL",
+    type: typing.Literal["ALL", "SEL", "GROUP"] | None = "ALL",
 ):
     """Insert keyframes for the specified channels
 
@@ -256,7 +273,7 @@ def keyframe_insert(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param type: Type
-    :type type: str | None
+    :type type: typing.Literal['ALL','SEL','GROUP'] | None
     """
 
     ...
@@ -266,7 +283,10 @@ def keyframe_type(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    type: str | None = "KEYFRAME",
+    type: typing.Literal[
+        "KEYFRAME", "BREAKDOWN", "MOVING_HOLD", "EXTREME", "JITTER", "GENERATED"
+    ]
+    | None = "KEYFRAME",
 ):
     """Set type of keyframe for the selected keyframes
 
@@ -274,7 +294,7 @@ def keyframe_type(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param type: Type
-    :type type: str | None
+    :type type: typing.Literal['KEYFRAME', 'BREAKDOWN', 'MOVING_HOLD', 'EXTREME', 'JITTER', 'GENERATED'] | None
     """
 
     ...
@@ -326,7 +346,7 @@ def mirror(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    type: str | None = "CFRA",
+    type: typing.Literal["CFRA", "XAXIS", "MARKER"] | None = "CFRA",
 ):
     """Flip selected keyframes over the selected mirror line
 
@@ -343,7 +363,7 @@ def mirror(
 
     MARKER
     By Times Over First Selected Marker -- Flip times of selected keyframes using the first selected marker as the reference point.
-        :type type: str | None
+        :type type: typing.Literal['CFRA','XAXIS','MARKER'] | None
     """
 
     ...
@@ -367,8 +387,9 @@ def paste(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    offset: str | None = "START",
-    merge: str | None = "MIX",
+    offset: typing.Literal["START", "END", "RELATIVE", "NONE"] | None = "START",
+    merge: typing.Literal["MIX", "OVER_ALL", "OVER_RANGE", "OVER_RANGE_ALL"]
+    | None = "MIX",
     flipped: bool | None = False,
 ):
     """Paste keyframes from the internal clipboard for the selected channels, starting on the current frame
@@ -377,9 +398,9 @@ def paste(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param offset: Offset, Paste time offset of keys
-    :type offset: str | None
+    :type offset: typing.Literal['START', 'END', 'RELATIVE', 'NONE'] | None
     :param merge: Type, Method of merging pasted keys and existing
-    :type merge: str | None
+    :type merge: typing.Literal['MIX', 'OVER_ALL', 'OVER_RANGE', 'OVER_RANGE_ALL'] | None
     :param flipped: Flipped, Paste keyframes from mirrored bones if they exist
     :type flipped: bool | None
     """
@@ -419,7 +440,7 @@ def select_all(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    action: str | None = "TOGGLE",
+    action: typing.Literal["TOGGLE", "SELECT", "DESELECT", "INVERT"] | None = "TOGGLE",
 ):
     """Toggle selection of all keyframes
 
@@ -439,7 +460,7 @@ def select_all(
 
     INVERT
     Invert -- Invert selection of all elements.
-        :type action: str | None
+        :type action: typing.Literal['TOGGLE','SELECT','DESELECT','INVERT'] | None
     """
 
     ...
@@ -455,7 +476,7 @@ def select_box(
     ymin: int | None = 0,
     ymax: int | None = 0,
     wait_for_input: bool | None = True,
-    mode: str | None = "SET",
+    mode: typing.Literal["SET", "ADD", "SUB"] | None = "SET",
     tweak: bool | None = False,
 ):
     """Select all keyframes within the specified region
@@ -485,7 +506,7 @@ def select_box(
 
     SUB
     Subtract -- Subtract existing selection.
-        :type mode: str | None
+        :type mode: typing.Literal['SET','ADD','SUB'] | None
         :param tweak: Tweak, Operator has been activated using a click-drag event
         :type tweak: bool | None
     """
@@ -501,7 +522,7 @@ def select_circle(
     y: int | None = 0,
     radius: int | None = 25,
     wait_for_input: bool | None = True,
-    mode: str | None = "SET",
+    mode: typing.Literal["SET", "ADD", "SUB"] | None = "SET",
 ):
     """Select keyframe points using circle selection
 
@@ -526,7 +547,7 @@ def select_circle(
 
     SUB
     Subtract -- Subtract existing selection.
-        :type mode: str | None
+        :type mode: typing.Literal['SET','ADD','SUB'] | None
     """
 
     ...
@@ -536,7 +557,8 @@ def select_column(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    mode: str | None = "KEYS",
+    mode: typing.Literal["KEYS", "CFRA", "MARKERS_COLUMN", "MARKERS_BETWEEN"]
+    | None = "KEYS",
 ):
     """Select all keyframes on the specified frame(s)
 
@@ -544,7 +566,7 @@ def select_column(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param mode: Mode
-    :type mode: str | None
+    :type mode: typing.Literal['KEYS','CFRA','MARKERS_COLUMN','MARKERS_BETWEEN'] | None
     """
 
     ...
@@ -558,7 +580,7 @@ def select_lasso(
     use_smooth_stroke: bool | None = False,
     smooth_stroke_factor: float | None = 0.75,
     smooth_stroke_radius: int | None = 35,
-    mode: str | None = "SET",
+    mode: typing.Literal["SET", "ADD", "SUB"] | None = "SET",
 ):
     """Select keyframe points using lasso selection
 
@@ -583,7 +605,7 @@ def select_lasso(
 
     SUB
     Subtract -- Subtract existing selection.
-        :type mode: str | None
+        :type mode: typing.Literal['SET','ADD','SUB'] | None
     """
 
     ...
@@ -593,7 +615,7 @@ def select_leftright(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    mode: str | None = "CHECK",
+    mode: typing.Literal["CHECK", "LEFT", "RIGHT"] | None = "CHECK",
     extend: bool | None = False,
 ):
     """Select keyframes to the left or the right of the current frame
@@ -602,7 +624,7 @@ def select_leftright(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param mode: Mode
-    :type mode: str | None
+    :type mode: typing.Literal['CHECK','LEFT','RIGHT'] | None
     :param extend: Extend Select
     :type extend: bool | None
     """
@@ -656,7 +678,8 @@ def snap(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    type: str | None = "CFRA",
+    type: typing.Literal["CFRA", "NEAREST_FRAME", "NEAREST_SECOND", "NEAREST_MARKER"]
+    | None = "CFRA",
 ):
     """Snap selected keyframes to the times specified
 
@@ -676,7 +699,7 @@ def snap(
 
     NEAREST_MARKER
     Selection to Nearest Marker -- Snap selected keyframes to the nearest marker.
-        :type type: str | None
+        :type type: typing.Literal['CFRA','NEAREST_FRAME','NEAREST_SECOND','NEAREST_MARKER'] | None
     """
 
     ...

bpy/ops/anim/__init__.pyi

@@ -74,7 +74,7 @@ def channels_bake(
     range: collections.abc.Iterable[int] | None = (0, 0),
     step: float | None = 1.0,
     remove_outside_range: bool | None = False,
-    interpolation_type: str | None = "BEZIER",
+    interpolation_type: typing.Literal["BEZIER", "LIN", "CONST"] | None = "BEZIER",
     bake_modifiers: bool | None = True,
 ):
     """Create keyframes following the current shape of F-Curves of selected channels
@@ -98,7 +98,7 @@ def channels_bake(
 
     CONST
     Constant -- New keys will be constant.
-        :type interpolation_type: str | None
+        :type interpolation_type: typing.Literal['BEZIER','LIN','CONST'] | None
         :param bake_modifiers: Bake Modifiers, Bake Modifiers into keyframes and delete them after
         :type bake_modifiers: bool | None
     """
@@ -180,8 +180,8 @@ def channels_editable_toggle(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    mode: str | None = "TOGGLE",
-    type: str | None = "PROTECT",
+    mode: typing.Literal["TOGGLE", "DISABLE", "ENABLE", "INVERT"] | None = "TOGGLE",
+    type: typing.Literal["PROTECT", "MUTE"] | None = "PROTECT",
 ):
     """Toggle editability of selected channels
 
@@ -189,9 +189,9 @@ def channels_editable_toggle(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param mode: Mode
-    :type mode: str | None
+    :type mode: typing.Literal['TOGGLE','DISABLE','ENABLE','INVERT'] | None
     :param type: Type
-    :type type: str | None
+    :type type: typing.Literal['PROTECT','MUTE'] | None
     """
 
     ...
@@ -251,7 +251,7 @@ def channels_move(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    direction: str | None = "DOWN",
+    direction: typing.Literal["TOP", "UP", "DOWN", "BOTTOM"] | None = "DOWN",
 ):
     """Rearrange selected animation channels
 
@@ -259,7 +259,7 @@ def channels_move(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param direction: Direction
-    :type direction: str | None
+    :type direction: typing.Literal['TOP','UP','DOWN','BOTTOM'] | None
     """
 
     ...
@@ -283,7 +283,7 @@ def channels_select_all(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    action: str | None = "TOGGLE",
+    action: typing.Literal["TOGGLE", "SELECT", "DESELECT", "INVERT"] | None = "TOGGLE",
 ):
     """Toggle selection of all animation channels
 
@@ -303,7 +303,7 @@ def channels_select_all(
 
     INVERT
     Invert -- Invert selection of all elements.
-        :type action: str | None
+        :type action: typing.Literal['TOGGLE','SELECT','DESELECT','INVERT'] | None
     """
 
     ...
@@ -363,8 +363,8 @@ def channels_setting_disable(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    mode: str | None = "DISABLE",
-    type: str | None = "PROTECT",
+    mode: typing.Literal["TOGGLE", "DISABLE", "ENABLE", "INVERT"] | None = "DISABLE",
+    type: typing.Literal["PROTECT", "MUTE"] | None = "PROTECT",
 ):
     """Disable specified setting on all selected animation channels
 
@@ -372,9 +372,9 @@ def channels_setting_disable(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param mode: Mode
-    :type mode: str | None
+    :type mode: typing.Literal['TOGGLE','DISABLE','ENABLE','INVERT'] | None
     :param type: Type
-    :type type: str | None
+    :type type: typing.Literal['PROTECT','MUTE'] | None
     """
 
     ...
@@ -384,8 +384,8 @@ def channels_setting_enable(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    mode: str | None = "ENABLE",
-    type: str | None = "PROTECT",
+    mode: typing.Literal["TOGGLE", "DISABLE", "ENABLE", "INVERT"] | None = "ENABLE",
+    type: typing.Literal["PROTECT", "MUTE"] | None = "PROTECT",
 ):
     """Enable specified setting on all selected animation channels
 
@@ -393,9 +393,9 @@ def channels_setting_enable(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param mode: Mode
-    :type mode: str | None
+    :type mode: typing.Literal['TOGGLE','DISABLE','ENABLE','INVERT'] | None
     :param type: Type
-    :type type: str | None
+    :type type: typing.Literal['PROTECT','MUTE'] | None
     """
 
     ...
@@ -405,8 +405,8 @@ def channels_setting_toggle(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    mode: str | None = "TOGGLE",
-    type: str | None = "PROTECT",
+    mode: typing.Literal["TOGGLE", "DISABLE", "ENABLE", "INVERT"] | None = "TOGGLE",
+    type: typing.Literal["PROTECT", "MUTE"] | None = "PROTECT",
 ):
     """Toggle specified setting on all selected animation channels
 
@@ -414,9 +414,9 @@ def channels_setting_toggle(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param mode: Mode
-    :type mode: str | None
+    :type mode: typing.Literal['TOGGLE','DISABLE','ENABLE','INVERT'] | None
     :param type: Type
-    :type type: str | None
+    :type type: typing.Literal['PROTECT','MUTE'] | None
     """
 
     ...

bpy/ops/armature/__init__.pyi

@@ -47,7 +47,7 @@ def autoside_names(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    type: str | None = "XAXIS",
+    type: typing.Literal["XAXIS", "YAXIS", "ZAXIS"] | None = "XAXIS",
 ):
     """Automatically renames the selected bones according to which side of the target axis they fall on
 
@@ -64,7 +64,7 @@ def autoside_names(
 
     ZAXIS
     Z-Axis -- Top/Bottom.
-        :type type: str | None
+        :type type: typing.Literal['XAXIS','YAXIS','ZAXIS'] | None
     """
 
     ...
@@ -92,7 +92,22 @@ def calculate_roll(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    type: str | None = "POS_X",
+    type: typing.Literal[
+        "POS_X",
+        "POS_Z",
+        "GLOBAL_POS_X",
+        "GLOBAL_POS_Y",
+        "GLOBAL_POS_Z",
+        "NEG_X",
+        "NEG_Z",
+        "GLOBAL_NEG_X",
+        "GLOBAL_NEG_Y",
+        "GLOBAL_NEG_Z",
+        "ACTIVE",
+        "VIEW",
+        "CURSOR",
+    ]
+    | None = "POS_X",
     axis_flip: bool | None = False,
     axis_only: bool | None = False,
 ):
@@ -102,7 +117,7 @@ def calculate_roll(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param type: Type
-    :type type: str | None
+    :type type: typing.Literal['POS_X','POS_Z','GLOBAL_POS_X','GLOBAL_POS_Y','GLOBAL_POS_Z','NEG_X','NEG_Z','GLOBAL_NEG_X','GLOBAL_NEG_Y','GLOBAL_NEG_Z','ACTIVE','VIEW','CURSOR'] | None
     :param axis_flip: Flip Axis, Negate the alignment axis
     :type axis_flip: bool | None
     :param axis_only: Shortest Rotation, Ignore the axis direction, use the shortest rotation to align
@@ -194,7 +209,7 @@ def collection_move(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    direction: str | None = "UP",
+    direction: typing.Literal["UP", "DOWN"] | None = "UP",
 ):
     """Change position of active Bone Collection in list of Bone collections
 
@@ -202,7 +217,7 @@ def collection_move(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param direction: Direction, Direction to move the active Bone Collection towards
-    :type direction: str | None
+    :type direction: typing.Literal['UP','DOWN'] | None
     """
 
     ...
@@ -321,7 +336,7 @@ def copy_bone_color_to_selected(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    bone_type: str | None = "EDIT",
+    bone_type: typing.Literal["EDIT", "POSE"] | None = "EDIT",
 ):
     """Copy the bone color of the active bone to all selected bones
 
@@ -335,7 +350,7 @@ def copy_bone_color_to_selected(
 
     POSE
     Pose Bone -- Copy Pose Bone colors from the active pose bone to all selected pose bones.
-        :type bone_type: str | None
+        :type bone_type: typing.Literal['EDIT','POSE'] | None
     """
 
     ...
@@ -547,7 +562,7 @@ def parent_clear(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    type: str | None = "CLEAR",
+    type: typing.Literal["CLEAR", "DISCONNECT"] | None = "CLEAR",
 ):
     """Remove the parent-child relationship between selected bones and their parents
 
@@ -555,7 +570,7 @@ def parent_clear(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param type: Clear Type, What way to clear parenting
-    :type type: str | None
+    :type type: typing.Literal['CLEAR','DISCONNECT'] | None
     """
 
     ...
@@ -565,7 +580,7 @@ def parent_set(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    type: str | None = "CONNECTED",
+    type: typing.Literal["CONNECTED", "OFFSET"] | None = "CONNECTED",
 ):
     """Set the active bone as the parent of the selected bones
 
@@ -573,7 +588,7 @@ def parent_set(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param type: Parent Type, Type of parenting
-    :type type: str | None
+    :type type: typing.Literal['CONNECTED','OFFSET'] | None
     """
 
     ...
@@ -619,7 +634,7 @@ def select_all(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    action: str | None = "TOGGLE",
+    action: typing.Literal["TOGGLE", "SELECT", "DESELECT", "INVERT"] | None = "TOGGLE",
 ):
     """Toggle selection status of all bones
 
@@ -639,7 +654,7 @@ def select_all(
 
     INVERT
     Invert -- Invert selection of all elements.
-        :type action: str | None
+        :type action: typing.Literal['TOGGLE','SELECT','DESELECT','INVERT'] | None
     """
 
     ...
@@ -649,7 +664,7 @@ def select_hierarchy(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    direction: str | None = "PARENT",
+    direction: typing.Literal["PARENT", "CHILD"] | None = "PARENT",
     extend: bool | None = False,
 ):
     """Select immediate parent/children of selected bones
@@ -658,7 +673,7 @@ def select_hierarchy(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param direction: Direction
-    :type direction: str | None
+    :type direction: typing.Literal['PARENT','CHILD'] | None
     :param extend: Extend, Extend the selection
     :type extend: bool | None
     """
@@ -758,7 +773,19 @@ def select_similar(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    type: str | None = "LENGTH",
+    type: typing.Literal[
+        "CHILDREN",
+        "CHILDREN_IMMEDIATE",
+        "SIBLINGS",
+        "LENGTH",
+        "DIRECTION",
+        "PREFIX",
+        "SUFFIX",
+        "BONE_COLLECTION",
+        "COLOR",
+        "SHAPE",
+    ]
+    | None = "LENGTH",
     threshold: float | None = 0.1,
 ):
     """Select similar bones by property types
@@ -767,7 +794,7 @@ def select_similar(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param type: Type
-    :type type: str | None
+    :type type: typing.Literal['CHILDREN','CHILDREN_IMMEDIATE','SIBLINGS','LENGTH','DIRECTION','PREFIX','SUFFIX','BONE_COLLECTION','COLOR','SHAPE'] | None
     :param threshold: Threshold
     :type threshold: float | None
     """
@@ -853,7 +880,7 @@ def symmetrize(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    direction: str | None = "NEGATIVE_X",
+    direction: typing.Literal["NEGATIVE_X", "POSITIVE_X"] | None = "NEGATIVE_X",
 ):
     """Enforce symmetry, make copies of the selection or use existing
 
@@ -861,7 +888,7 @@ def symmetrize(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param direction: Direction, Which sides to copy from and to (when both are selected)
-    :type direction: str | None
+    :type direction: typing.Literal['NEGATIVE_X','POSITIVE_X'] | None
     """
 
     ...

bpy/ops/asset/__init__.pyi

@@ -47,7 +47,10 @@ def bundle_install(
     filter_folder: bool | None = True,
     filter_blenlib: bool | None = False,
     filemode: int | None = 8,
-    display_type: str | None = "DEFAULT",
+    display_type: typing.Literal[
+        "DEFAULT", "LIST_VERTICAL", "LIST_HORIZONTAL", "THUMBNAIL"
+    ]
+    | None = "DEFAULT",
     sort_method: str | None = "",
 ):
     """Copy the current .blend file into an Asset Library. Only works on standalone .blend files (i.e. when no other files are referenced)
@@ -112,7 +115,7 @@ def bundle_install(
 
     THUMBNAIL
     Thumbnails -- Display files as thumbnails.
-        :type display_type: str | None
+        :type display_type: typing.Literal['DEFAULT','LIST_VERTICAL','LIST_HORIZONTAL','THUMBNAIL'] | None
         :param sort_method: File sorting mode
         :type sort_method: str | None
     """

bpy/ops/boid/__init__.pyi

@@ -11,7 +11,17 @@ def rule_add(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     *,
-    type: str | None = "GOAL",
+    type: typing.Literal[
+        "GOAL",
+        "AVOID",
+        "AVOID_COLLISION",
+        "SEPARATE",
+        "FLOCK",
+        "FOLLOW_LEADER",
+        "AVERAGE_SPEED",
+        "FIGHT",
+    ]
+    | None = "GOAL",
 ):
     """Add a boid rule to the current boid state
 
@@ -19,7 +29,7 @@ def rule_add(
     :type execution_context: int | str | None
     :type undo: bool | None
     :param type: Type
-    :type type: str | None
+    :type type: typing.Literal['GOAL', 'AVOID', 'AVOID_COLLISION', 'SEPARATE', 'FLOCK', 'FOLLOW_LEADER', 'AVERAGE_SPEED', 'FIGHT'] | None
     """
 
     ...