fake-bpy-module 20240524__py3-none-any.whl → 20240528__py3-none-any.whl

bpy/ops/grease_pencil/__init__.pyi

@@ -10,6 +10,7 @@ def brush_stroke(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     stroke: bpy.types.bpy_prop_collection[bpy.types.OperatorStrokeElement]
     | None = None,
     mode: str | None = "NORMAL",
@@ -40,6 +41,7 @@ def caps_set(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     type: str | None = "ROUND",
 ):
     """Change curve caps mode (rounded or flat)
@@ -69,6 +71,7 @@ def clean_loose(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     limit: typing.Any | None = 1,
 ):
     """Remove loose points
@@ -100,6 +103,7 @@ def cyclical_set(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     type: str | None = "TOGGLE",
 ):
     """Close or open the selected stroke adding a segment from last to first point
@@ -131,6 +135,7 @@ def delete_frame(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     type: str | None = "ACTIVE_FRAME",
 ):
     """Delete Grease Pencil Frame(s)
@@ -154,6 +159,7 @@ def dissolve(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     type: str | None = "POINTS",
 ):
     """Delete selected points without splitting strokes
@@ -194,6 +200,7 @@ def duplicate_move(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     GREASE_PENCIL_OT_duplicate: typing.Any | None = None,
     TRANSFORM_OT_translate: bpy.ops.transform.translate | None = None,
 ):
@@ -228,6 +235,7 @@ def extrude_move(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     GREASE_PENCIL_OT_extrude: typing.Any | None = None,
     TRANSFORM_OT_translate: bpy.ops.transform.translate | None = None,
 ):
@@ -248,6 +256,7 @@ def fill(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     on_back: bool | typing.Any | None = False,
     invert: bool | typing.Any | None = False,
     precision: bool | typing.Any | None = False,
@@ -271,6 +280,7 @@ def insert_blank_frame(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     all_layers: bool | typing.Any | None = False,
     duration: typing.Any | None = 0,
 ):
@@ -291,6 +301,7 @@ def layer_active(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     layer: typing.Any | None = 0,
 ):
     """Set the active Grease Pencil layer
@@ -308,6 +319,7 @@ def layer_add(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     new_layer_name: str | typing.Any = "Layer",
 ):
     """Add a new Grease Pencil layer in the active object
@@ -325,6 +337,7 @@ def layer_duplicate(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     empty_keyframes: bool | typing.Any | None = False,
 ):
     """Make a copy of the active Grease Pencil layer
@@ -342,6 +355,7 @@ def layer_group_add(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     new_layer_group_name: str | typing.Any = "",
 ):
     """Add a new Grease Pencil layer group in the active object
@@ -359,6 +373,7 @@ def layer_group_remove(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     keep_children: bool | typing.Any | None = False,
 ):
     """Remove Grease Pencil layer group in the active object
@@ -376,6 +391,7 @@ def layer_hide(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     unselected: bool | typing.Any | None = False,
 ):
     """Hide selected/unselected Grease Pencil layers
@@ -393,6 +409,7 @@ def layer_isolate(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     affect_visibility: bool | typing.Any | None = False,
 ):
     """Make only active layer visible/editable
@@ -410,6 +427,7 @@ def layer_lock_all(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     lock: bool | typing.Any | None = True,
 ):
     """Lock all Grease Pencil layers to prevent them from being accidentally modified
@@ -427,6 +445,7 @@ def layer_mask_add(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     name: str | typing.Any = "",
 ):
     """Add new layer as masking
@@ -458,6 +477,7 @@ def layer_mask_reorder(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     direction: str | None = "UP",
 ):
     """Reorder the active Grease Pencil mask layer up/down in the list
@@ -489,6 +509,7 @@ def layer_reorder(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     target_layer_name: str | typing.Any = "Layer",
     location: str | None = "ABOVE",
 ):
@@ -523,6 +544,7 @@ def material_copy_to_object(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     only_active: bool | typing.Any | None = True,
 ):
     """Append Materials of the active Grease Pencil to other object
@@ -540,6 +562,7 @@ def material_hide(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     invert: bool | typing.Any | None = False,
 ):
     """Hide active/inactive Grease Pencil material(s)
@@ -613,6 +636,7 @@ def material_select(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     deselect: bool | typing.Any | None = False,
 ):
     """Select/Deselect all Grease Pencil strokes using current material
@@ -644,6 +668,7 @@ def move_to_layer(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     target_layer_name: str | typing.Any = "Layer",
     add_new_layer: bool | typing.Any | None = False,
 ):
@@ -664,6 +689,7 @@ def paste(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     paste_back: bool | typing.Any | None = False,
 ):
     """Paste Grease Pencil points or strokes from the internal clipboard to the active layer
@@ -681,6 +707,7 @@ def primitive_arc(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     subdivision: typing.Any | None = 62,
     type: str | None = "ARC",
 ):
@@ -701,6 +728,7 @@ def primitive_box(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     subdivision: typing.Any | None = 3,
     type: str | None = "BOX",
 ):
@@ -721,6 +749,7 @@ def primitive_circle(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     subdivision: typing.Any | None = 94,
     type: str | None = "CIRCLE",
 ):
@@ -741,6 +770,7 @@ def primitive_curve(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     subdivision: typing.Any | None = 62,
     type: str | None = "CURVE",
 ):
@@ -761,6 +791,7 @@ def primitive_line(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     subdivision: typing.Any | None = 6,
     type: str | None = "LINE",
 ):
@@ -781,6 +812,7 @@ def primitive_polyline(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     subdivision: typing.Any | None = 6,
     type: str | None = "POLYLINE",
 ):
@@ -801,6 +833,7 @@ def reorder(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     direction: str | None = "TOP",
 ):
     """Change the display order of the selected strokes
@@ -818,6 +851,7 @@ def sculpt_paint(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     stroke: bpy.types.bpy_prop_collection[bpy.types.OperatorStrokeElement]
     | None = None,
     mode: str | None = "NORMAL",
@@ -848,6 +882,7 @@ def select_all(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     action: str | None = "TOGGLE",
 ):
     """(De)select all visible strokes
@@ -877,6 +912,7 @@ def select_alternate(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     deselect_ends: bool | typing.Any | None = False,
 ):
     """Select alternated points in strokes with already selected points
@@ -894,6 +930,7 @@ def select_ends(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     amount_start: typing.Any | None = 0,
     amount_end: typing.Any | None = 1,
 ):
@@ -956,6 +993,7 @@ def select_random(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     ratio: typing.Any | None = 0.5,
     seed: typing.Any | None = 0,
     action: str | None = "SELECT",
@@ -985,6 +1023,7 @@ def separate(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     mode: str | None = "SELECTED",
 ):
     """Separate the selected geometry into a new grease pencil object
@@ -1025,6 +1064,7 @@ def set_material(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     slot: str | None = "DEFAULT",
 ):
     """Set active material
@@ -1042,6 +1082,7 @@ def set_selection_mode(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     mode: str | None = "POINT",
 ):
     """Change the selection mode for Grease Pencil strokes
@@ -1059,6 +1100,7 @@ def set_uniform_opacity(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     opacity: typing.Any | None = 1.0,
 ):
     """Set all stroke points to same opacity
@@ -1076,6 +1118,7 @@ def set_uniform_thickness(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     thickness: typing.Any | None = 0.1,
 ):
     """Set all stroke points to same thickness
@@ -1107,6 +1150,7 @@ def snap_to_cursor(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     use_offset: bool | typing.Any | None = True,
 ):
     """Snap selected points/strokes to the cursor
@@ -1138,6 +1182,7 @@ def stroke_cutter(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     path: bpy.types.bpy_prop_collection[bpy.types.OperatorMousePath] | None = None,
 ):
     """Delete stroke points in between intersecting strokes
@@ -1155,6 +1200,7 @@ def stroke_material_set(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     material: str | typing.Any = "",
 ):
     """Assign the active material slot to the selected strokes
@@ -1172,6 +1218,7 @@ def stroke_merge_by_distance(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     threshold: typing.Any | None = 0.001,
     use_unselected: bool | typing.Any | None = False,
 ):
@@ -1192,6 +1239,7 @@ def stroke_simplify(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     factor: typing.Any | None = 0.01,
 ):
     """Simplify selected strokes
@@ -1209,6 +1257,7 @@ def stroke_smooth(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     iterations: typing.Any | None = 10,
     factor: typing.Any | None = 1.0,
     smooth_ends: bool | typing.Any | None = False,
@@ -1244,6 +1293,7 @@ def stroke_subdivide(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     number_cuts: typing.Any | None = 1,
     only_selected: bool | typing.Any | None = True,
 ):
@@ -1264,6 +1314,7 @@ def stroke_subdivide_smooth(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     GREASE_PENCIL_OT_stroke_subdivide: typing.Any | None = None,
     GREASE_PENCIL_OT_stroke_smooth: typing.Any | None = None,
 ):
@@ -1298,6 +1349,7 @@ def weight_brush_stroke(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
+    *,
     stroke: bpy.types.bpy_prop_collection[bpy.types.OperatorStrokeElement]
     | None = None,
     mode: str | None = "NORMAL",