esphome 2025.9.2__py3-none-any.whl → 2025.10.0b1__py3-none-any.whl

esphome/components/mpr121/mpr121.h

@@ -88,7 +88,6 @@ class MPR121Component : public Component, public i2c::I2CDevice {
   enum ErrorCode {
     NONE = 0,
     COMMUNICATION_FAILED,
-    WRONG_CHIP_STATE,
   } error_code_{NONE};
 
   bool flush_gpio_();

esphome/components/nau7802/nau7802.cpp

@@ -218,7 +218,7 @@ void NAU7802Sensor::dump_config() {
 
 void NAU7802Sensor::write_value_(uint8_t start_reg, size_t size, int32_t value) {
   uint8_t data[4];
-  for (int i = 0; i < size; i++) {
+  for (size_t i = 0; i < size; i++) {
     data[i] = 0xFF & (value >> (size - 1 - i) * 8);
   }
   this->write_register(start_reg, data, size);
@@ -228,7 +228,7 @@ int32_t NAU7802Sensor::read_value_(uint8_t start_reg, size_t size) {
   uint8_t data[4];
   this->read_register(start_reg, data, size);
   int32_t result = 0;
-  for (int i = 0; i < size; i++) {
+  for (size_t i = 0; i < size; i++) {
     result |= data[i] << (size - 1 - i) * 8;
   }
   // extend sign bit

esphome/components/network/__init__.py

@@ -47,9 +47,13 @@ async def to_code(config):
             cg.add_define(
                 "USE_NETWORK_MIN_IPV6_ADDR_COUNT", config[CONF_MIN_IPV6_ADDR_COUNT]
             )
-        if CORE.using_esp_idf:
-            add_idf_sdkconfig_option("CONFIG_LWIP_IPV6", enable_ipv6)
-            add_idf_sdkconfig_option("CONFIG_LWIP_IPV6_AUTOCONFIG", enable_ipv6)
+        if CORE.is_esp32:
+            if CORE.using_esp_idf:
+                add_idf_sdkconfig_option("CONFIG_LWIP_IPV6", enable_ipv6)
+                add_idf_sdkconfig_option("CONFIG_LWIP_IPV6_AUTOCONFIG", enable_ipv6)
+            else:
+                add_idf_sdkconfig_option("CONFIG_LWIP_IPV6", True)
+                add_idf_sdkconfig_option("CONFIG_LWIP_IPV6_AUTOCONFIG", True)
         elif enable_ipv6:
             cg.add_build_flag("-DCONFIG_LWIP_IPV6")
             cg.add_build_flag("-DCONFIG_LWIP_IPV6_AUTOCONFIG")

esphome/components/nextion/display.py

@@ -153,10 +153,10 @@ async def to_code(config):
     if CONF_TFT_URL in config:
         cg.add_define("USE_NEXTION_TFT_UPLOAD")
         cg.add(var.set_tft_url(config[CONF_TFT_URL]))
-        if CORE.is_esp32 and CORE.using_arduino:
-            cg.add_library("NetworkClientSecure", None)
-            cg.add_library("HTTPClient", None)
-        elif CORE.is_esp32 and CORE.using_esp_idf:
+        if CORE.is_esp32:
+            if CORE.using_arduino:
+                cg.add_library("NetworkClientSecure", None)
+                cg.add_library("HTTPClient", None)
             esp32.add_idf_sdkconfig_option("CONFIG_ESP_TLS_INSECURE", True)
             esp32.add_idf_sdkconfig_option(
                 "CONFIG_ESP_TLS_SKIP_SERVER_CERT_VERIFY", True

esphome/components/nextion/nextion.cpp

@@ -77,7 +77,7 @@ bool Nextion::check_connect_() {
   this->recv_ret_string_(response, 0, false);
   if (!response.empty() && response[0] == 0x1A) {
     // Swallow invalid variable name responses that may be caused by the above commands
-    ESP_LOGD(TAG, "0x1A error ignored (setup)");
+    ESP_LOGV(TAG, "0x1A error ignored (setup)");
     return false;
   }
   if (response.empty() || response.find("comok") == std::string::npos) {
@@ -334,7 +334,7 @@ void Nextion::loop() {
       this->started_ms_ = App.get_loop_component_start_time();
 
     if (this->started_ms_ + this->startup_override_ms_ < App.get_loop_component_start_time()) {
-      ESP_LOGD(TAG, "Manual ready set");
+      ESP_LOGV(TAG, "Manual ready set");
       this->connection_state_.nextion_reports_is_setup_ = true;
     }
   }
@@ -544,7 +544,7 @@ void Nextion::process_nextion_commands_() {
         uint8_t page_id = to_process[0];
         uint8_t component_id = to_process[1];
         uint8_t touch_event = to_process[2];  // 0 -> release, 1 -> press
-        ESP_LOGD(TAG, "Touch %s: page %u comp %u", touch_event ? "PRESS" : "RELEASE", page_id, component_id);
+        ESP_LOGV(TAG, "Touch %s: page %u comp %u", touch_event ? "PRESS" : "RELEASE", page_id, component_id);
         for (auto *touch : this->touch_) {
           touch->process_touch(page_id, component_id, touch_event != 0);
         }
@@ -559,7 +559,7 @@ void Nextion::process_nextion_commands_() {
         }
 
         uint8_t page_id = to_process[0];
-        ESP_LOGD(TAG, "New page: %u", page_id);
+        ESP_LOGV(TAG, "New page: %u", page_id);
         this->page_callback_.call(page_id);
         break;
       }
@@ -577,7 +577,7 @@ void Nextion::process_nextion_commands_() {
         const uint16_t x = (uint16_t(to_process[0]) << 8) | to_process[1];
         const uint16_t y = (uint16_t(to_process[2]) << 8) | to_process[3];
         const uint8_t touch_event = to_process[4];  // 0 -> release, 1 -> press
-        ESP_LOGD(TAG, "Touch %s at %u,%u", touch_event ? "PRESS" : "RELEASE", x, y);
+        ESP_LOGV(TAG, "Touch %s at %u,%u", touch_event ? "PRESS" : "RELEASE", x, y);
         break;
       }
 
@@ -676,7 +676,7 @@ void Nextion::process_nextion_commands_() {
       }
       case 0x88:  // system successful start up
       {
-        ESP_LOGD(TAG, "System start: %zu", to_process_length);
+        ESP_LOGV(TAG, "System start: %zu", to_process_length);
         this->connection_state_.nextion_reports_is_setup_ = true;
         break;
       }
@@ -922,7 +922,7 @@ void Nextion::set_nextion_sensor_state(NextionQueueType queue_type, const std::s
 }
 
 void Nextion::set_nextion_text_state(const std::string &name, const std::string &state) {
-  ESP_LOGD(TAG, "State: %s='%s'", name.c_str(), state.c_str());
+  ESP_LOGV(TAG, "State: %s='%s'", name.c_str(), state.c_str());
 
   for (auto *sensor : this->textsensortype_) {
     if (name == sensor->get_variable_name()) {
@@ -933,7 +933,7 @@ void Nextion::set_nextion_text_state(const std::string &name, const std::string
 }
 
 void Nextion::all_components_send_state_(bool force_update) {
-  ESP_LOGD(TAG, "Send states");
+  ESP_LOGV(TAG, "Send states");
   for (auto *binarysensortype : this->binarysensortype_) {
     if (force_update || binarysensortype->get_needs_to_send_update())
       binarysensortype->send_state_to_nextion();

esphome/components/number/__init__.py

@@ -51,6 +51,7 @@ from esphome.const import (
     DEVICE_CLASS_OZONE,
     DEVICE_CLASS_PH,
     DEVICE_CLASS_PM1,
+    DEVICE_CLASS_PM4,
     DEVICE_CLASS_PM10,
     DEVICE_CLASS_PM25,
     DEVICE_CLASS_POWER,
@@ -116,6 +117,7 @@ DEVICE_CLASSES = [
     DEVICE_CLASS_PM1,
     DEVICE_CLASS_PM10,
     DEVICE_CLASS_PM25,
+    DEVICE_CLASS_PM4,
     DEVICE_CLASS_POWER,
     DEVICE_CLASS_POWER_FACTOR,
     DEVICE_CLASS_PRECIPITATION,

esphome/components/number/number_call.cpp

@@ -7,6 +7,17 @@ namespace number {
 
 static const char *const TAG = "number";
 
+// Helper functions to reduce code size for logging
+void NumberCall::log_perform_warning_(const LogString *message) {
+  ESP_LOGW(TAG, "'%s': %s", this->parent_->get_name().c_str(), LOG_STR_ARG(message));
+}
+
+void NumberCall::log_perform_warning_value_range_(const LogString *comparison, const LogString *limit_type, float val,
+                                                  float limit) {
+  ESP_LOGW(TAG, "'%s': %f %s %s %f", this->parent_->get_name().c_str(), val, LOG_STR_ARG(comparison),
+           LOG_STR_ARG(limit_type), limit);
+}
+
 NumberCall &NumberCall::set_value(float value) { return this->with_operation(NUMBER_OP_SET).with_value(value); }
 
 NumberCall &NumberCall::number_increment(bool cycle) {
@@ -42,7 +53,7 @@ void NumberCall::perform() {
   const auto &traits = parent->traits;
 
   if (this->operation_ == NUMBER_OP_NONE) {
-    ESP_LOGW(TAG, "'%s' - NumberCall performed without selecting an operation", name);
+    this->log_perform_warning_(LOG_STR("No operation"));
     return;
   }
 
@@ -51,28 +62,28 @@ void NumberCall::perform() {
   float max_value = traits.get_max_value();
 
   if (this->operation_ == NUMBER_OP_SET) {
-    ESP_LOGD(TAG, "'%s' - Setting number value", name);
+    ESP_LOGD(TAG, "'%s': Setting value", name);
     if (!this->value_.has_value() || std::isnan(*this->value_)) {
-      ESP_LOGW(TAG, "'%s' - No value set for NumberCall", name);
+      this->log_perform_warning_(LOG_STR("No value"));
       return;
     }
     target_value = this->value_.value();
   } else if (this->operation_ == NUMBER_OP_TO_MIN) {
     if (std::isnan(min_value)) {
-      ESP_LOGW(TAG, "'%s' - Can't set to min value through NumberCall: no min_value defined", name);
+      this->log_perform_warning_(LOG_STR("min undefined"));
     } else {
       target_value = min_value;
     }
   } else if (this->operation_ == NUMBER_OP_TO_MAX) {
     if (std::isnan(max_value)) {
-      ESP_LOGW(TAG, "'%s' - Can't set to max value through NumberCall: no max_value defined", name);
+      this->log_perform_warning_(LOG_STR("max undefined"));
     } else {
       target_value = max_value;
     }
   } else if (this->operation_ == NUMBER_OP_INCREMENT) {
-    ESP_LOGD(TAG, "'%s' - Increment number, with%s cycling", name, this->cycle_ ? "" : "out");
+    ESP_LOGD(TAG, "'%s': Increment with%s cycling", name, this->cycle_ ? "" : "out");
     if (!parent->has_state()) {
-      ESP_LOGW(TAG, "'%s' - Can't increment number through NumberCall: no active state to modify", name);
+      this->log_perform_warning_(LOG_STR("Can't increment, no state"));
       return;
     }
     auto step = traits.get_step();
@@ -85,9 +96,9 @@ void NumberCall::perform() {
       }
     }
   } else if (this->operation_ == NUMBER_OP_DECREMENT) {
-    ESP_LOGD(TAG, "'%s' - Decrement number, with%s cycling", name, this->cycle_ ? "" : "out");
+    ESP_LOGD(TAG, "'%s': Decrement with%s cycling", name, this->cycle_ ? "" : "out");
     if (!parent->has_state()) {
-      ESP_LOGW(TAG, "'%s' - Can't decrement number through NumberCall: no active state to modify", name);
+      this->log_perform_warning_(LOG_STR("Can't decrement, no state"));
       return;
     }
     auto step = traits.get_step();
@@ -102,15 +113,15 @@ void NumberCall::perform() {
   }
 
   if (target_value < min_value) {
-    ESP_LOGW(TAG, "'%s' - Value %f must not be less than minimum %f", name, target_value, min_value);
+    this->log_perform_warning_value_range_(LOG_STR("<"), LOG_STR("min"), target_value, min_value);
     return;
   }
   if (target_value > max_value) {
-    ESP_LOGW(TAG, "'%s' - Value %f must not be greater than maximum %f", name, target_value, max_value);
+    this->log_perform_warning_value_range_(LOG_STR(">"), LOG_STR("max"), target_value, max_value);
     return;
   }
 
-  ESP_LOGD(TAG, "  New number value: %f", target_value);
+  ESP_LOGD(TAG, "  New value: %f", target_value);
   this->parent_->control(target_value);
 }
 

esphome/components/number/number_call.h

@@ -1,6 +1,7 @@
 #pragma once
 
 #include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 #include "number_traits.h"
 
 namespace esphome {
@@ -33,6 +34,10 @@ class NumberCall {
   NumberCall &with_cycle(bool cycle);
 
  protected:
+  void log_perform_warning_(const LogString *message);
+  void log_perform_warning_value_range_(const LogString *comparison, const LogString *limit_type, float val,
+                                        float limit);
+
   Number *const parent_;
   NumberOperation operation_{NUMBER_OP_NONE};
   optional<float> value_;

esphome/components/online_image/bmp_image.cpp

@@ -117,7 +117,8 @@ int HOT BmpDecoder::decode(uint8_t *buffer, size_t size) {
         this->paint_index_++;
         this->current_index_ += 3;
         index += 3;
-        if (x == this->width_ - 1 && this->padding_bytes_ > 0) {
+        size_t last_col = static_cast<size_t>(this->width_) - 1;
+        if (x == last_col && this->padding_bytes_ > 0) {
           index += this->padding_bytes_;
           this->current_index_ += this->padding_bytes_;
         }

esphome/components/online_image/jpeg_image.cpp

@@ -25,8 +25,10 @@ static int draw_callback(JPEGDRAW *jpeg) {
   // to avoid crashing.
   App.feed_wdt();
   size_t position = 0;
-  for (size_t y = 0; y < jpeg->iHeight; y++) {
-    for (size_t x = 0; x < jpeg->iWidth; x++) {
+  size_t height = static_cast<size_t>(jpeg->iHeight);
+  size_t width = static_cast<size_t>(jpeg->iWidth);
+  for (size_t y = 0; y < height; y++) {
+    for (size_t x = 0; x < width; x++) {
       auto rg = decode_value(jpeg->pPixels[position++]);
       auto ba = decode_value(jpeg->pPixels[position++]);
       Color color(rg[1], rg[0], ba[1], ba[0]);

esphome/components/openthread/openthread.cpp

@@ -143,11 +143,10 @@ void OpenThreadSrpComponent::setup() {
     return;
   }
 
-  // Copy the mdns services to our local instance so that the c_str pointers remain valid for the lifetime of this
-  // component
-  this->mdns_services_ = this->mdns_->get_services();
-  ESP_LOGD(TAG, "Setting up SRP services. count = %d\n", this->mdns_services_.size());
-  for (const auto &service : this->mdns_services_) {
+  // Get mdns services and copy their data (strings are copied with strdup below)
+  const auto &mdns_services = this->mdns_->get_services();
+  ESP_LOGD(TAG, "Setting up SRP services. count = %d\n", mdns_services.size());
+  for (const auto &service : mdns_services) {
     otSrpClientBuffersServiceEntry *entry = otSrpClientBuffersAllocateService(instance);
     if (!entry) {
       ESP_LOGW(TAG, "Failed to allocate service entry");
@@ -156,7 +155,7 @@ void OpenThreadSrpComponent::setup() {
 
     // Set service name
     char *string = otSrpClientBuffersGetServiceEntryServiceNameString(entry, &size);
-    std::string full_service = service.service_type + "." + service.proto;
+    std::string full_service = std::string(MDNS_STR_ARG(service.service_type)) + "." + MDNS_STR_ARG(service.proto);
     if (full_service.size() > size) {
       ESP_LOGW(TAG, "Service name too long: %s", full_service.c_str());
       continue;
@@ -182,7 +181,7 @@ void OpenThreadSrpComponent::setup() {
     for (size_t i = 0; i < service.txt_records.size(); i++) {
       const auto &txt = service.txt_records[i];
       auto value = const_cast<TemplatableValue<std::string> &>(txt.value).value();
-      txt_entries[i].mKey = strdup(txt.key.c_str());
+      txt_entries[i].mKey = MDNS_STR_ARG(txt.key);
       txt_entries[i].mValue = reinterpret_cast<const uint8_t *>(strdup(value.c_str()));
       txt_entries[i].mValueLength = value.size();
     }

esphome/components/openthread/openthread.h

@@ -57,7 +57,6 @@ class OpenThreadSrpComponent : public Component {
 
  protected:
   esphome::mdns::MDNSComponent *mdns_{nullptr};
-  std::vector<esphome::mdns::MDNSService> mdns_services_;
   std::vector<std::unique_ptr<uint8_t[]>> memory_pool_;
   void *pool_alloc_(size_t size);
 };

esphome/components/ota/ota_backend.h

@@ -14,6 +14,7 @@ namespace ota {
 enum OTAResponseTypes {
   OTA_RESPONSE_OK = 0x00,
   OTA_RESPONSE_REQUEST_AUTH = 0x01,
+  OTA_RESPONSE_REQUEST_SHA256_AUTH = 0x02,
 
   OTA_RESPONSE_HEADER_OK = 0x40,
   OTA_RESPONSE_AUTH_OK = 0x41,

esphome/components/packages/__init__.py

@@ -106,11 +106,13 @@ CONFIG_SCHEMA = cv.Any(
 )
 
 
-def _process_base_package(config: dict) -> dict:
+def _process_base_package(config: dict, skip_update: bool = False) -> dict:
+    # When skip_update is True, use NEVER_REFRESH to prevent updates
+    actual_refresh = git.NEVER_REFRESH if skip_update else config[CONF_REFRESH]
     repo_dir, revert = git.clone_or_update(
         url=config[CONF_URL],
         ref=config.get(CONF_REF),
-        refresh=config[CONF_REFRESH],
+        refresh=actual_refresh,
         domain=DOMAIN,
         username=config.get(CONF_USERNAME),
         password=config.get(CONF_PASSWORD),
@@ -180,16 +182,16 @@ def _process_base_package(config: dict) -> dict:
     return {"packages": packages}
 
 
-def _process_package(package_config, config):
+def _process_package(package_config, config, skip_update: bool = False):
     recursive_package = package_config
     if CONF_URL in package_config:
-        package_config = _process_base_package(package_config)
+        package_config = _process_base_package(package_config, skip_update)
     if isinstance(package_config, dict):
-        recursive_package = do_packages_pass(package_config)
+        recursive_package = do_packages_pass(package_config, skip_update)
     return merge_config(recursive_package, config)
 
 
-def do_packages_pass(config: dict):
+def do_packages_pass(config: dict, skip_update: bool = False):
     if CONF_PACKAGES not in config:
         return config
     packages = config[CONF_PACKAGES]
@@ -198,10 +200,10 @@ def do_packages_pass(config: dict):
         if isinstance(packages, dict):
             for package_name, package_config in reversed(packages.items()):
                 with cv.prepend_path(package_name):
-                    config = _process_package(package_config, config)
+                    config = _process_package(package_config, config, skip_update)
         elif isinstance(packages, list):
             for package_config in reversed(packages):
-                config = _process_package(package_config, config)
+                config = _process_package(package_config, config, skip_update)
         else:
             raise cv.Invalid(
                 f"Packages must be a key to value mapping or list, got {type(packages)} instead"

esphome/components/packet_transport/packet_transport.cpp

@@ -270,6 +270,7 @@ void PacketTransport::add_binary_data_(uint8_t key, const char *id, bool data) {
   auto len = 1 + 1 + 1 + strlen(id);
   if (len + this->header_.size() + this->data_.size() > this->get_max_packet_size()) {
     this->flush_();
+    this->init_data_();
   }
   add(this->data_, key);
   add(this->data_, (uint8_t) data);
@@ -284,6 +285,7 @@ void PacketTransport::add_data_(uint8_t key, const char *id, uint32_t data) {
   auto len = 4 + 1 + 1 + strlen(id);
   if (len + this->header_.size() + this->data_.size() > this->get_max_packet_size()) {
     this->flush_();
+    this->init_data_();
   }
   add(this->data_, key);
   add(this->data_, data);

esphome/components/pid/pid_controller.cpp

@@ -104,7 +104,7 @@ float PIDController::weighted_average_(std::deque<float> &list, float new_value,
   list.push_front(new_value);
 
   // keep only 'samples' readings, by popping off the back of the list
-  while (list.size() > samples)
+  while (samples > 0 && list.size() > static_cast<size_t>(samples))
     list.pop_back();
 
   // calculate and return the average of all values in the list