esphome 2025.8.3__py3-none-any.whl → 2025.9.0b1__py3-none-any.whl

esphome/components/{inkplate6 → inkplate}/inkplate.h

@@ -5,8 +5,10 @@
 #include "esphome/core/component.h"
 #include "esphome/core/hal.h"
 
+#include <array>
+
 namespace esphome {
-namespace inkplate6 {
+namespace inkplate {
 
 enum InkplateModel : uint8_t {
   INKPLATE_6 = 0,
@@ -17,79 +19,35 @@ enum InkplateModel : uint8_t {
   INKPLATE_5_V2 = 5,
 };
 
-class Inkplate6 : public display::DisplayBuffer, public i2c::I2CDevice {
- public:
-  const uint8_t LUT2[16] = {0xAA, 0xA9, 0xA6, 0xA5, 0x9A, 0x99, 0x96, 0x95,
-                            0x6A, 0x69, 0x66, 0x65, 0x5A, 0x59, 0x56, 0x55};
-  const uint8_t LUTW[16] = {0xFF, 0xFE, 0xFB, 0xFA, 0xEF, 0xEE, 0xEB, 0xEA,
-                            0xBF, 0xBE, 0xBB, 0xBA, 0xAF, 0xAE, 0xAB, 0xAA};
-  const uint8_t LUTB[16] = {0xFF, 0xFD, 0xF7, 0xF5, 0xDF, 0xDD, 0xD7, 0xD5,
-                            0x7F, 0x7D, 0x77, 0x75, 0x5F, 0x5D, 0x57, 0x55};
-
-  const uint8_t pixelMaskLUT[8] = {0x1, 0x2, 0x4, 0x8, 0x10, 0x20, 0x40, 0x80};
-  const uint8_t pixelMaskGLUT[2] = {0x0F, 0xF0};
-
-  const uint8_t waveform3BitAll[6][8][9] = {// INKPLATE_6
-                                            {{0, 1, 1, 0, 0, 1, 1, 0, 0},
-                                             {0, 1, 2, 1, 1, 2, 1, 0, 0},
-                                             {1, 1, 1, 2, 2, 1, 0, 0, 0},
-                                             {0, 0, 0, 1, 1, 1, 2, 0, 0},
-                                             {2, 1, 1, 1, 2, 1, 2, 0, 0},
-                                             {2, 2, 1, 1, 2, 1, 2, 0, 0},
-                                             {1, 1, 1, 2, 1, 2, 2, 0, 0},
-                                             {0, 0, 0, 0, 0, 0, 2, 0, 0}},
-                                            // INKPLATE_10
-                                            {{0, 0, 0, 0, 0, 0, 0, 1, 0},
-                                             {0, 0, 0, 2, 2, 2, 1, 1, 0},
-                                             {0, 0, 2, 1, 1, 2, 2, 1, 0},
-                                             {0, 1, 2, 2, 1, 2, 2, 1, 0},
-                                             {0, 0, 2, 1, 2, 2, 2, 1, 0},
-                                             {0, 2, 2, 2, 2, 2, 2, 1, 0},
-                                             {0, 0, 0, 0, 0, 2, 1, 2, 0},
-                                             {0, 0, 0, 2, 2, 2, 2, 2, 0}},
-                                            // INKPLATE_6_PLUS
-                                            {{0, 0, 0, 0, 0, 2, 1, 1, 0},
-                                             {0, 0, 2, 1, 1, 1, 2, 1, 0},
-                                             {0, 2, 2, 2, 1, 1, 2, 1, 0},
-                                             {0, 0, 2, 2, 2, 1, 2, 1, 0},
-                                             {0, 0, 0, 0, 2, 2, 2, 1, 0},
-                                             {0, 0, 2, 1, 2, 1, 1, 2, 0},
-                                             {0, 0, 2, 2, 2, 1, 1, 2, 0},
-                                             {0, 0, 0, 0, 2, 2, 2, 2, 0}},
-                                            // INKPLATE_6_V2
-                                            {{1, 0, 1, 0, 1, 1, 1, 0, 0},
-                                             {0, 0, 0, 1, 1, 1, 1, 0, 0},
-                                             {1, 1, 1, 1, 0, 2, 1, 0, 0},
-                                             {1, 1, 1, 2, 2, 1, 1, 0, 0},
-                                             {1, 1, 1, 1, 2, 2, 1, 0, 0},
-                                             {0, 1, 1, 1, 2, 2, 1, 0, 0},
-                                             {0, 0, 0, 0, 1, 1, 2, 0, 0},
-                                             {0, 0, 0, 0, 0, 1, 2, 0, 0}},
-                                            // INKPLATE_5
-                                            {{0, 0, 1, 1, 0, 1, 1, 1, 0},
-                                             {0, 1, 1, 1, 1, 2, 0, 1, 0},
-                                             {1, 2, 2, 0, 2, 1, 1, 1, 0},
-                                             {1, 1, 1, 2, 0, 1, 1, 2, 0},
-                                             {0, 1, 1, 1, 2, 0, 1, 2, 0},
-                                             {0, 0, 0, 1, 1, 2, 1, 2, 0},
-                                             {1, 1, 1, 2, 0, 2, 1, 2, 0},
-                                             {0, 0, 0, 0, 0, 0, 0, 0, 0}},
-                                            // INKPLATE_5_V2
-                                            {{0, 0, 1, 1, 2, 1, 1, 1, 0},
-                                             {1, 1, 2, 2, 1, 2, 1, 1, 0},
-                                             {0, 1, 2, 2, 1, 1, 2, 1, 0},
-                                             {0, 0, 1, 1, 1, 1, 1, 2, 0},
-                                             {1, 2, 1, 2, 1, 1, 1, 2, 0},
-                                             {0, 1, 1, 1, 2, 0, 1, 2, 0},
-                                             {1, 1, 1, 2, 2, 2, 1, 2, 0},
-                                             {0, 0, 0, 0, 0, 0, 0, 0, 0}}};
+static constexpr uint8_t GLUT_SIZE = 9;
+static constexpr uint8_t GLUT_COUNT = 8;
+
+static constexpr uint8_t LUT2[16] = {0xAA, 0xA9, 0xA6, 0xA5, 0x9A, 0x99, 0x96, 0x95,
+                                     0x6A, 0x69, 0x66, 0x65, 0x5A, 0x59, 0x56, 0x55};
+static constexpr uint8_t LUTW[16] = {0xFF, 0xFE, 0xFB, 0xFA, 0xEF, 0xEE, 0xEB, 0xEA,
+                                     0xBF, 0xBE, 0xBB, 0xBA, 0xAF, 0xAE, 0xAB, 0xAA};
+static constexpr uint8_t LUTB[16] = {0xFF, 0xFD, 0xF7, 0xF5, 0xDF, 0xDD, 0xD7, 0xD5,
+                                     0x7F, 0x7D, 0x77, 0x75, 0x5F, 0x5D, 0x57, 0x55};
+
+static constexpr uint8_t PIXEL_MASK_LUT[8] = {0x1, 0x2, 0x4, 0x8, 0x10, 0x20, 0x40, 0x80};
+static constexpr uint8_t PIXEL_MASK_GLUT[2] = {0x0F, 0xF0};
 
+class Inkplate : public display::DisplayBuffer, public i2c::I2CDevice {
+ public:
   void set_greyscale(bool greyscale) {
     this->greyscale_ = greyscale;
     this->block_partial_ = true;
     if (this->is_ready())
       this->initialize_();
   }
+
+  void set_waveform(const std::array<uint8_t, GLUT_COUNT * GLUT_SIZE> &waveform, bool is_custom) {
+    static_assert(sizeof(this->waveform_) == sizeof(uint8_t) * GLUT_COUNT * GLUT_SIZE,
+                  "waveform_ buffer size must match input waveform array size");
+    memmove(this->waveform_, waveform.data(), sizeof(this->waveform_));
+    this->custom_waveform_ = is_custom;
+  }
+
   void set_mirror_y(bool mirror_y) { this->mirror_y_ = mirror_y; }
   void set_mirror_x(bool mirror_x) { this->mirror_x_ = mirror_x; }
 
@@ -225,6 +183,8 @@ class Inkplate6 : public display::DisplayBuffer, public i2c::I2CDevice {
   bool mirror_y_{false};
   bool mirror_x_{false};
   bool partial_updating_;
+  bool custom_waveform_{false};
+  uint8_t waveform_[GLUT_COUNT][GLUT_SIZE];
 
   InkplateModel model_;
 
@@ -250,5 +210,5 @@ class Inkplate6 : public display::DisplayBuffer, public i2c::I2CDevice {
   GPIOPin *wakeup_pin_;
 };
 
-}  // namespace inkplate6
+}  // namespace inkplate
 }  // namespace esphome

esphome/components/inkplate6/__init__.py

@@ -1 +0,0 @@
-CODEOWNERS = ["@jesserockz"]

esphome/components/inkplate6/display.py

@@ -1,214 +1,5 @@
-from esphome import pins
-import esphome.codegen as cg
-from esphome.components import display, i2c
-from esphome.components.esp32 import CONF_CPU_FREQUENCY
 import esphome.config_validation as cv
-from esphome.const import (
-    CONF_FULL_UPDATE_EVERY,
-    CONF_ID,
-    CONF_LAMBDA,
-    CONF_MIRROR_X,
-    CONF_MIRROR_Y,
-    CONF_MODEL,
-    CONF_OE_PIN,
-    CONF_PAGES,
-    CONF_TRANSFORM,
-    CONF_WAKEUP_PIN,
-    PLATFORM_ESP32,
-)
-import esphome.final_validate as fv
-
-DEPENDENCIES = ["i2c", "esp32"]
-AUTO_LOAD = ["psram"]
-
-CONF_DISPLAY_DATA_0_PIN = "display_data_0_pin"
-CONF_DISPLAY_DATA_1_PIN = "display_data_1_pin"
-CONF_DISPLAY_DATA_2_PIN = "display_data_2_pin"
-CONF_DISPLAY_DATA_3_PIN = "display_data_3_pin"
-CONF_DISPLAY_DATA_4_PIN = "display_data_4_pin"
-CONF_DISPLAY_DATA_5_PIN = "display_data_5_pin"
-CONF_DISPLAY_DATA_6_PIN = "display_data_6_pin"
-CONF_DISPLAY_DATA_7_PIN = "display_data_7_pin"
-
-CONF_CL_PIN = "cl_pin"
-CONF_CKV_PIN = "ckv_pin"
-CONF_GREYSCALE = "greyscale"
-CONF_GMOD_PIN = "gmod_pin"
-CONF_GPIO0_ENABLE_PIN = "gpio0_enable_pin"
-CONF_LE_PIN = "le_pin"
-CONF_PARTIAL_UPDATING = "partial_updating"
-CONF_POWERUP_PIN = "powerup_pin"
-CONF_SPH_PIN = "sph_pin"
-CONF_SPV_PIN = "spv_pin"
-CONF_VCOM_PIN = "vcom_pin"
-
-inkplate6_ns = cg.esphome_ns.namespace("inkplate6")
-Inkplate6 = inkplate6_ns.class_(
-    "Inkplate6",
-    cg.PollingComponent,
-    i2c.I2CDevice,
-    display.Display,
-    display.DisplayBuffer,
-)
-
-InkplateModel = inkplate6_ns.enum("InkplateModel")
-
-MODELS = {
-    "inkplate_6": InkplateModel.INKPLATE_6,
-    "inkplate_10": InkplateModel.INKPLATE_10,
-    "inkplate_6_plus": InkplateModel.INKPLATE_6_PLUS,
-    "inkplate_6_v2": InkplateModel.INKPLATE_6_V2,
-    "inkplate_5": InkplateModel.INKPLATE_5,
-    "inkplate_5_v2": InkplateModel.INKPLATE_5_V2,
-}
 
-CONFIG_SCHEMA = cv.All(
-    display.FULL_DISPLAY_SCHEMA.extend(
-        {
-            cv.GenerateID(): cv.declare_id(Inkplate6),
-            cv.Optional(CONF_GREYSCALE, default=False): cv.boolean,
-            cv.Optional(CONF_TRANSFORM): cv.Schema(
-                {
-                    cv.Optional(CONF_MIRROR_X, default=False): cv.boolean,
-                    cv.Optional(CONF_MIRROR_Y, default=False): cv.boolean,
-                }
-            ),
-            cv.Optional(CONF_PARTIAL_UPDATING, default=True): cv.boolean,
-            cv.Optional(CONF_FULL_UPDATE_EVERY, default=10): cv.uint32_t,
-            cv.Optional(CONF_MODEL, default="inkplate_6"): cv.enum(
-                MODELS, lower=True, space="_"
-            ),
-            # Control pins
-            cv.Required(CONF_CKV_PIN): pins.gpio_output_pin_schema,
-            cv.Required(CONF_GMOD_PIN): pins.gpio_output_pin_schema,
-            cv.Required(CONF_GPIO0_ENABLE_PIN): pins.gpio_output_pin_schema,
-            cv.Required(CONF_OE_PIN): pins.gpio_output_pin_schema,
-            cv.Required(CONF_POWERUP_PIN): pins.gpio_output_pin_schema,
-            cv.Required(CONF_SPH_PIN): pins.gpio_output_pin_schema,
-            cv.Required(CONF_SPV_PIN): pins.gpio_output_pin_schema,
-            cv.Required(CONF_VCOM_PIN): pins.gpio_output_pin_schema,
-            cv.Required(CONF_WAKEUP_PIN): pins.gpio_output_pin_schema,
-            cv.Optional(CONF_CL_PIN, default=0): pins.internal_gpio_output_pin_schema,
-            cv.Optional(CONF_LE_PIN, default=2): pins.internal_gpio_output_pin_schema,
-            # Data pins
-            cv.Optional(
-                CONF_DISPLAY_DATA_0_PIN, default=4
-            ): pins.internal_gpio_output_pin_schema,
-            cv.Optional(
-                CONF_DISPLAY_DATA_1_PIN, default=5
-            ): pins.internal_gpio_output_pin_schema,
-            cv.Optional(
-                CONF_DISPLAY_DATA_2_PIN, default=18
-            ): pins.internal_gpio_output_pin_schema,
-            cv.Optional(
-                CONF_DISPLAY_DATA_3_PIN, default=19
-            ): pins.internal_gpio_output_pin_schema,
-            cv.Optional(
-                CONF_DISPLAY_DATA_4_PIN, default=23
-            ): pins.internal_gpio_output_pin_schema,
-            cv.Optional(
-                CONF_DISPLAY_DATA_5_PIN, default=25
-            ): pins.internal_gpio_output_pin_schema,
-            cv.Optional(
-                CONF_DISPLAY_DATA_6_PIN, default=26
-            ): pins.internal_gpio_output_pin_schema,
-            cv.Optional(
-                CONF_DISPLAY_DATA_7_PIN, default=27
-            ): pins.internal_gpio_output_pin_schema,
-        }
-    )
-    .extend(cv.polling_component_schema("5s"))
-    .extend(i2c.i2c_device_schema(0x48)),
-    cv.has_at_most_one_key(CONF_PAGES, CONF_LAMBDA),
+CONFIG_SCHEMA = cv.invalid(
+    "The inkplate6 display component has been renamed to inkplate."
 )
-
-
-def _validate_cpu_frequency(config):
-    esp32_config = fv.full_config.get()[PLATFORM_ESP32]
-    if esp32_config[CONF_CPU_FREQUENCY] != "240MHZ":
-        raise cv.Invalid(
-            "Inkplate requires 240MHz CPU frequency (set in esp32 component)"
-        )
-    return config
-
-
-FINAL_VALIDATE_SCHEMA = _validate_cpu_frequency
-
-
-async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-
-    await display.register_display(var, config)
-    await i2c.register_i2c_device(var, config)
-
-    if CONF_LAMBDA in config:
-        lambda_ = await cg.process_lambda(
-            config[CONF_LAMBDA], [(display.DisplayRef, "it")], return_type=cg.void
-        )
-        cg.add(var.set_writer(lambda_))
-
-    cg.add(var.set_greyscale(config[CONF_GREYSCALE]))
-    if transform := config.get(CONF_TRANSFORM):
-        cg.add(var.set_mirror_x(transform[CONF_MIRROR_X]))
-        cg.add(var.set_mirror_y(transform[CONF_MIRROR_Y]))
-    cg.add(var.set_partial_updating(config[CONF_PARTIAL_UPDATING]))
-    cg.add(var.set_full_update_every(config[CONF_FULL_UPDATE_EVERY]))
-
-    cg.add(var.set_model(config[CONF_MODEL]))
-
-    ckv = await cg.gpio_pin_expression(config[CONF_CKV_PIN])
-    cg.add(var.set_ckv_pin(ckv))
-
-    gmod = await cg.gpio_pin_expression(config[CONF_GMOD_PIN])
-    cg.add(var.set_gmod_pin(gmod))
-
-    gpio0_enable = await cg.gpio_pin_expression(config[CONF_GPIO0_ENABLE_PIN])
-    cg.add(var.set_gpio0_enable_pin(gpio0_enable))
-
-    oe = await cg.gpio_pin_expression(config[CONF_OE_PIN])
-    cg.add(var.set_oe_pin(oe))
-
-    powerup = await cg.gpio_pin_expression(config[CONF_POWERUP_PIN])
-    cg.add(var.set_powerup_pin(powerup))
-
-    sph = await cg.gpio_pin_expression(config[CONF_SPH_PIN])
-    cg.add(var.set_sph_pin(sph))
-
-    spv = await cg.gpio_pin_expression(config[CONF_SPV_PIN])
-    cg.add(var.set_spv_pin(spv))
-
-    vcom = await cg.gpio_pin_expression(config[CONF_VCOM_PIN])
-    cg.add(var.set_vcom_pin(vcom))
-
-    wakeup = await cg.gpio_pin_expression(config[CONF_WAKEUP_PIN])
-    cg.add(var.set_wakeup_pin(wakeup))
-
-    cl = await cg.gpio_pin_expression(config[CONF_CL_PIN])
-    cg.add(var.set_cl_pin(cl))
-
-    le = await cg.gpio_pin_expression(config[CONF_LE_PIN])
-    cg.add(var.set_le_pin(le))
-
-    display_data_0 = await cg.gpio_pin_expression(config[CONF_DISPLAY_DATA_0_PIN])
-    cg.add(var.set_display_data_0_pin(display_data_0))
-
-    display_data_1 = await cg.gpio_pin_expression(config[CONF_DISPLAY_DATA_1_PIN])
-    cg.add(var.set_display_data_1_pin(display_data_1))
-
-    display_data_2 = await cg.gpio_pin_expression(config[CONF_DISPLAY_DATA_2_PIN])
-    cg.add(var.set_display_data_2_pin(display_data_2))
-
-    display_data_3 = await cg.gpio_pin_expression(config[CONF_DISPLAY_DATA_3_PIN])
-    cg.add(var.set_display_data_3_pin(display_data_3))
-
-    display_data_4 = await cg.gpio_pin_expression(config[CONF_DISPLAY_DATA_4_PIN])
-    cg.add(var.set_display_data_4_pin(display_data_4))
-
-    display_data_5 = await cg.gpio_pin_expression(config[CONF_DISPLAY_DATA_5_PIN])
-    cg.add(var.set_display_data_5_pin(display_data_5))
-
-    display_data_6 = await cg.gpio_pin_expression(config[CONF_DISPLAY_DATA_6_PIN])
-    cg.add(var.set_display_data_6_pin(display_data_6))
-
-    display_data_7 = await cg.gpio_pin_expression(config[CONF_DISPLAY_DATA_7_PIN])
-    cg.add(var.set_display_data_7_pin(display_data_7))

esphome/components/integration/integration_sensor.cpp

@@ -10,7 +10,7 @@ static const char *const TAG = "integration";
 
 void IntegrationSensor::setup() {
   if (this->restore_) {
-    this->pref_ = global_preferences->make_preference<float>(this->get_object_id_hash());
+    this->pref_ = global_preferences->make_preference<float>(this->get_preference_hash());
     float preference_value = 0;
     this->pref_.load(&preference_value);
     this->result_ = preference_value;

esphome/components/json/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome.core import coroutine_with_priority
+from esphome.core import CoroPriority, coroutine_with_priority
 
 CODEOWNERS = ["@esphome/core"]
 json_ns = cg.esphome_ns.namespace("json")
@@ -10,7 +10,7 @@ CONFIG_SCHEMA = cv.All(
 )
 
 
-@coroutine_with_priority(1.0)
+@coroutine_with_priority(CoroPriority.BUS)
 async def to_code(config):
     cg.add_library("bblanchon/ArduinoJson", "7.4.2")
     cg.add_define("USE_JSON")

esphome/components/kmeteriso/kmeteriso.cpp

@@ -33,7 +33,7 @@ void KMeterISOComponent::setup() {
   }
 
   uint8_t read_buf[4] = {1};
-  if (!this->read_register(KMETER_ERROR_STATUS_REG, read_buf, 1)) {
+  if (!this->read_bytes(KMETER_ERROR_STATUS_REG, read_buf, 1)) {
     ESP_LOGCONFIG(TAG, "Could not read from the device.");
     this->error_code_ = COMMUNICATION_FAILED;
     this->mark_failed();

esphome/components/lc709203f/lc709203f.cpp

@@ -1,5 +1,6 @@
-#include "esphome/core/log.h"
 #include "lc709203f.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace lc709203f {
@@ -189,7 +190,7 @@ uint8_t Lc709203f::get_register_(uint8_t register_to_read, uint16_t *register_va
       // Error on the i2c bus
       this->status_set_warning(
           str_sprintf("Error code %d when reading from register 0x%02X", return_code, register_to_read).c_str());
-    } else if (this->crc8_(read_buffer, 5) != read_buffer[5]) {
+    } else if (crc8(read_buffer, 5, 0x00, 0x07, true) != read_buffer[5]) {
       // I2C indicated OK, but the CRC of the data does not matcth.
       this->status_set_warning(str_sprintf("CRC error reading from register 0x%02X", register_to_read).c_str());
     } else {
@@ -220,7 +221,7 @@ uint8_t Lc709203f::set_register_(uint8_t register_to_set, uint16_t value_to_set)
   write_buffer[1] = register_to_set;
   write_buffer[2] = value_to_set & 0xFF;         // Low byte
   write_buffer[3] = (value_to_set >> 8) & 0xFF;  // High byte
-  write_buffer[4] = this->crc8_(write_buffer, 4);
+  write_buffer[4] = crc8(write_buffer, 4, 0x00, 0x07, true);
 
   for (uint8_t i = 0; i <= LC709203F_I2C_RETRY_COUNT; i++) {
     // Note: we don't write the first byte of the write buffer to the device.
@@ -239,20 +240,6 @@ uint8_t Lc709203f::set_register_(uint8_t register_to_set, uint16_t value_to_set)
   return return_code;
 }
 
-uint8_t Lc709203f::crc8_(uint8_t *byte_buffer, uint8_t length_of_crc) {
-  uint8_t crc = 0x00;
-  const uint8_t polynomial(0x07);
-
-  for (uint8_t j = length_of_crc; j; --j) {
-    crc ^= *byte_buffer++;
-
-    for (uint8_t i = 8; i; --i) {
-      crc = (crc & 0x80) ? (crc << 1) ^ polynomial : (crc << 1);
-    }
-  }
-  return crc;
-}
-
 void Lc709203f::set_pack_size(uint16_t pack_size) {
   static const uint16_t PACK_SIZE_ARRAY[6] = {100, 200, 500, 1000, 2000, 3000};
   static const uint16_t APA_ARRAY[6] = {0x08, 0x0B, 0x10, 0x19, 0x2D, 0x36};

esphome/components/lc709203f/lc709203f.h

@@ -1,8 +1,8 @@
 #pragma once
 
-#include "esphome/core/component.h"
-#include "esphome/components/sensor/sensor.h"
 #include "esphome/components/i2c/i2c.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/core/component.h"
 
 namespace esphome {
 namespace lc709203f {
@@ -38,7 +38,6 @@ class Lc709203f : public sensor::Sensor, public PollingComponent, public i2c::I2
  private:
   uint8_t get_register_(uint8_t register_to_read, uint16_t *register_value);
   uint8_t set_register_(uint8_t register_to_set, uint16_t value_to_set);
-  uint8_t crc8_(uint8_t *byte_buffer, uint8_t length_of_crc);
 
  protected:
   sensor::Sensor *voltage_sensor_{nullptr};

esphome/components/ld2420/text_sensor/{text_sensor.cpp → ld2420_text_sensor.cpp}

@@ -1,4 +1,4 @@
-#include "text_sensor.h"
+#include "ld2420_text_sensor.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 

esphome/components/ld2450/ld2450.cpp

@@ -184,7 +184,7 @@ static inline bool validate_header_footer(const uint8_t *header_footer, const ui
 void LD2450Component::setup() {
 #ifdef USE_NUMBER
   if (this->presence_timeout_number_ != nullptr) {
-    this->pref_ = global_preferences->make_preference<float>(this->presence_timeout_number_->get_object_id_hash());
+    this->pref_ = global_preferences->make_preference<float>(this->presence_timeout_number_->get_preference_hash());
     this->set_presence_timeout();
   }
 #endif

esphome/components/libretiny/preferences.cpp

@@ -5,7 +5,7 @@
 #include "esphome/core/preferences.h"
 #include <flashdb.h>
 #include <cstring>
-#include <vector>
+#include <memory>
 #include <string>
 
 namespace esphome {
@@ -139,21 +139,29 @@ class LibreTinyPreferences : public ESPPreferences {
   }
 
   bool is_changed(const fdb_kvdb_t db, const NVSData &to_save) {
-    NVSData stored_data{};
     struct fdb_kv kv;
     fdb_kv_t kvp = fdb_kv_get_obj(db, to_save.key.c_str(), &kv);
     if (kvp == nullptr) {
       ESP_LOGV(TAG, "fdb_kv_get_obj('%s'): nullptr - the key might not be set yet", to_save.key.c_str());
       return true;
     }
-    stored_data.data.resize(kv.value_len);
-    fdb_blob_make(&blob, stored_data.data.data(), kv.value_len);
+
+    // Check size first - if different, data has changed
+    if (kv.value_len != to_save.data.size()) {
+      return true;
+    }
+
+    // Allocate buffer on heap to avoid stack allocation for large data
+    auto stored_data = std::make_unique<uint8_t[]>(kv.value_len);
+    fdb_blob_make(&blob, stored_data.get(), kv.value_len);
     size_t actual_len = fdb_kv_get_blob(db, to_save.key.c_str(), &blob);
     if (actual_len != kv.value_len) {
       ESP_LOGV(TAG, "fdb_kv_get_blob('%s') len mismatch: %u != %u", to_save.key.c_str(), actual_len, kv.value_len);
       return true;
     }
-    return to_save.data != stored_data.data;
+
+    // Compare the actual data
+    return memcmp(to_save.data.data(), stored_data.get(), kv.value_len) != 0;
   }
 
   bool reset() override {

esphome/components/light/__init__.py

@@ -37,7 +37,7 @@ from esphome.const import (
     CONF_WEB_SERVER,
     CONF_WHITE,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 from esphome.core.entity_helpers import entity_duplicate_validator, setup_entity
 from esphome.cpp_generator import MockObjClass
 
@@ -283,6 +283,6 @@ async def new_light(config, *args):
     return output_var
 
 
-@coroutine_with_priority(100.0)
+@coroutine_with_priority(CoroPriority.CORE)
 async def to_code(config):
     cg.add_global(light_ns.using)

esphome/components/light/addressable_light_effect.h

@@ -44,6 +44,13 @@ class AddressableLightEffect : public LightEffect {
     this->apply(*this->get_addressable_(), current_color);
   }
 
+  /// Get effect index specifically for addressable effects.
+  /// Can be used by effects to modify behavior based on their position in the list.
+  uint32_t get_effect_index() const { return this->get_index(); }
+
+  /// Check if this is the currently running addressable effect.
+  bool is_current_effect() const { return this->is_active() && this->get_addressable_()->is_effect_active(); }
+
  protected:
   AddressableLight *get_addressable_() const { return (AddressableLight *) this->state_->get_output(); }
 };

esphome/components/light/base_light_effects.h

@@ -125,6 +125,10 @@ class LambdaLightEffect : public LightEffect {
     }
   }
 
+  /// Get the current effect index for use in lambda functions.
+  /// This can be useful for lambda effects that need to know their own index.
+  uint32_t get_current_index() const { return this->get_index(); }
+
  protected:
   std::function<void(bool initial_run)> f_;
   uint32_t update_interval_;
@@ -143,6 +147,10 @@ class AutomationLightEffect : public LightEffect {
   }
   Trigger<> *get_trig() const { return trig_; }
 
+  /// Get the current effect index for use in automations.
+  /// Useful for automations that need to know which effect is running.
+  uint32_t get_current_index() const { return this->get_index(); }
+
  protected:
   Trigger<> *trig_{new Trigger<>};
 };