esphome 2025.5.2__py3-none-any.whl → 2025.6.0b2__py3-none-any.whl

esphome/components/mqtt/mqtt_component.cpp

@@ -64,11 +64,11 @@ bool MQTTComponent::send_discovery_() {
   const MQTTDiscoveryInfo &discovery_info = global_mqtt_client->get_discovery_info();
 
   if (discovery_info.clean) {
-    ESP_LOGV(TAG, "'%s': Cleaning discovery...", this->friendly_name().c_str());
+    ESP_LOGV(TAG, "'%s': Cleaning discovery", this->friendly_name().c_str());
     return global_mqtt_client->publish(this->get_discovery_topic_(discovery_info), "", 0, this->qos_, true);
   }
 
-  ESP_LOGV(TAG, "'%s': Sending discovery...", this->friendly_name().c_str());
+  ESP_LOGV(TAG, "'%s': Sending discovery", this->friendly_name().c_str());
 
   return global_mqtt_client->publish_json(
       this->get_discovery_topic_(discovery_info),
@@ -153,7 +153,7 @@ bool MQTTComponent::send_discovery_() {
         if (node_friendly_name.empty()) {
           node_friendly_name = node_name;
         }
-        const std::string &node_area = App.get_area();
+        std::string node_area = App.get_area();
 
         JsonObject device_info = root.createNestedObject(MQTT_DEVICE);
         const auto mac = get_mac_address();

esphome/components/mqtt/mqtt_cover.cpp

@@ -54,12 +54,16 @@ void MQTTCoverComponent::dump_config() {
   bool has_command_topic = traits.get_supports_position() || !traits.get_supports_tilt();
   LOG_MQTT_COMPONENT(true, has_command_topic)
   if (traits.get_supports_position()) {
-    ESP_LOGCONFIG(TAG, "  Position State Topic: '%s'", this->get_position_state_topic().c_str());
-    ESP_LOGCONFIG(TAG, "  Position Command Topic: '%s'", this->get_position_command_topic().c_str());
+    ESP_LOGCONFIG(TAG,
+                  "  Position State Topic: '%s'\n"
+                  "  Position Command Topic: '%s'",
+                  this->get_position_state_topic().c_str(), this->get_position_command_topic().c_str());
   }
   if (traits.get_supports_tilt()) {
-    ESP_LOGCONFIG(TAG, "  Tilt State Topic: '%s'", this->get_tilt_state_topic().c_str());
-    ESP_LOGCONFIG(TAG, "  Tilt Command Topic: '%s'", this->get_tilt_command_topic().c_str());
+    ESP_LOGCONFIG(TAG,
+                  "  Tilt State Topic: '%s'\n"
+                  "  Tilt Command Topic: '%s'",
+                  this->get_tilt_state_topic().c_str(), this->get_tilt_command_topic().c_str());
   }
 }
 void MQTTCoverComponent::send_discovery(JsonObject root, mqtt::SendDiscoveryConfig &config) {

esphome/components/mqtt/mqtt_fan.cpp

@@ -121,16 +121,22 @@ void MQTTFanComponent::dump_config() {
   ESP_LOGCONFIG(TAG, "MQTT Fan '%s': ", this->state_->get_name().c_str());
   LOG_MQTT_COMPONENT(true, true);
   if (this->state_->get_traits().supports_direction()) {
-    ESP_LOGCONFIG(TAG, "  Direction State Topic: '%s'", this->get_direction_state_topic().c_str());
-    ESP_LOGCONFIG(TAG, "  Direction Command Topic: '%s'", this->get_direction_command_topic().c_str());
+    ESP_LOGCONFIG(TAG,
+                  "  Direction State Topic: '%s'\n"
+                  "  Direction Command Topic: '%s'",
+                  this->get_direction_state_topic().c_str(), this->get_direction_command_topic().c_str());
   }
   if (this->state_->get_traits().supports_oscillation()) {
-    ESP_LOGCONFIG(TAG, "  Oscillation State Topic: '%s'", this->get_oscillation_state_topic().c_str());
-    ESP_LOGCONFIG(TAG, "  Oscillation Command Topic: '%s'", this->get_oscillation_command_topic().c_str());
+    ESP_LOGCONFIG(TAG,
+                  "  Oscillation State Topic: '%s'\n"
+                  "  Oscillation Command Topic: '%s'",
+                  this->get_oscillation_state_topic().c_str(), this->get_oscillation_command_topic().c_str());
   }
   if (this->state_->get_traits().supports_speed()) {
-    ESP_LOGCONFIG(TAG, "  Speed Level State Topic: '%s'", this->get_speed_level_state_topic().c_str());
-    ESP_LOGCONFIG(TAG, "  Speed Level Command Topic: '%s'", this->get_speed_level_command_topic().c_str());
+    ESP_LOGCONFIG(TAG,
+                  "  Speed Level State Topic: '%s'\n"
+                  "  Speed Level Command Topic: '%s'",
+                  this->get_speed_level_state_topic().c_str(), this->get_speed_level_command_topic().c_str());
   }
 }
 

esphome/components/mqtt/mqtt_valve.cpp

@@ -42,8 +42,10 @@ void MQTTValveComponent::dump_config() {
   bool has_command_topic = traits.get_supports_position();
   LOG_MQTT_COMPONENT(true, has_command_topic)
   if (traits.get_supports_position()) {
-    ESP_LOGCONFIG(TAG, "  Position State Topic: '%s'", this->get_position_state_topic().c_str());
-    ESP_LOGCONFIG(TAG, "  Position Command Topic: '%s'", this->get_position_command_topic().c_str());
+    ESP_LOGCONFIG(TAG,
+                  "  Position State Topic: '%s'\n"
+                  "  Position Command Topic: '%s'",
+                  this->get_position_state_topic().c_str(), this->get_position_command_topic().c_str());
   }
 }
 void MQTTValveComponent::send_discovery(JsonObject root, mqtt::SendDiscoveryConfig &config) {

esphome/components/ms5611/ms5611.cpp

@@ -15,7 +15,7 @@ static const uint8_t MS5611_CMD_CONV_D2 = 0x50;
 static const uint8_t MS5611_CMD_READ_PROM = 0xA2;
 
 void MS5611Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MS5611...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   if (!this->write_bytes(MS5611_CMD_RESET, nullptr, 0)) {
     this->mark_failed();
     return;
@@ -32,7 +32,7 @@ void MS5611Component::dump_config() {
   ESP_LOGCONFIG(TAG, "MS5611:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with MS5611 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);

esphome/components/ms8607/ms8607.cpp

@@ -67,7 +67,7 @@ static uint8_t crc4(uint16_t *buffer, size_t length);
 static uint8_t hsensor_crc_check(uint16_t value);
 
 void MS8607Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MS8607...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->error_code_ = ErrorCode::NONE;
   this->setup_status_ = SetupStatus::NEEDS_RESET;
 
@@ -140,7 +140,7 @@ void MS8607Component::dump_config() {
   // LOG_I2C_DEVICE doesn't work for humidity, the `address_` is protected. Log using get_address()
   ESP_LOGCONFIG(TAG, "  Address: 0x%02X", this->humidity_device_->get_address());
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with MS8607 failed.");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     switch (this->error_code_) {
       case ErrorCode::PT_RESET_FAILED:
         ESP_LOGE(TAG, "Temperature/Pressure RESET failed");

esphome/components/msa3xx/msa3xx.cpp

@@ -1,7 +1,7 @@
 #include "msa3xx.h"
-#include "esphome/core/log.h"
 #include "esphome/core/hal.h"
 #include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace msa3xx {
@@ -118,7 +118,7 @@ const char *orientation_xy_to_string(OrientationXY orientation) {
 const char *orientation_z_to_string(bool orientation) { return orientation ? "Downwards looking" : "Upwards looking"; }
 
 void MSA3xxComponent::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MSA3xx...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   uint8_t part_id{0xff};
   if (!this->read_byte(static_cast<uint8_t>(RegisterMap::PART_ID), &part_id) || (part_id != MSA_3XX_PART_ID)) {
@@ -159,15 +159,19 @@ void MSA3xxComponent::dump_config() {
   ESP_LOGCONFIG(TAG, "MSA3xx:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with MSA3xx failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
-  ESP_LOGCONFIG(TAG, "  Model: %s", model_to_string(this->model_));
-  ESP_LOGCONFIG(TAG, "  Power Mode: %s", power_mode_to_string(this->power_mode_));
-  ESP_LOGCONFIG(TAG, "  Bandwidth: %s", bandwidth_to_string(this->bandwidth_));
-  ESP_LOGCONFIG(TAG, "  Range: %s", range_to_string(this->range_));
-  ESP_LOGCONFIG(TAG, "  Resolution: %s", res_to_string(this->resolution_));
-  ESP_LOGCONFIG(TAG, "  Offsets: {%.3f m/s², %.3f m/s², %.3f m/s²}", this->offset_x_, this->offset_y_, this->offset_z_);
-  ESP_LOGCONFIG(TAG, "  Transform: {mirror_x=%s, mirror_y=%s, mirror_z=%s, swap_xy=%s}", YESNO(this->swap_.x_polarity),
+  ESP_LOGCONFIG(TAG,
+                "  Model: %s\n"
+                "  Power Mode: %s\n"
+                "  Bandwidth: %s\n"
+                "  Range: %s\n"
+                "  Resolution: %s\n"
+                "  Offsets: {%.3f m/s², %.3f m/s², %.3f m/s²}\n"
+                "  Transform: {mirror_x=%s, mirror_y=%s, mirror_z=%s, swap_xy=%s}",
+                model_to_string(this->model_), power_mode_to_string(this->power_mode_),
+                bandwidth_to_string(this->bandwidth_), range_to_string(this->range_), res_to_string(this->resolution_),
+                this->offset_x_, this->offset_y_, this->offset_z_, YESNO(this->swap_.x_polarity),
                 YESNO(this->swap_.y_polarity), YESNO(this->swap_.z_polarity), YESNO(this->swap_.x_y_swap));
   LOG_UPDATE_INTERVAL(this);
 
@@ -248,10 +252,10 @@ void MSA3xxComponent::loop() {
 }
 
 void MSA3xxComponent::update() {
-  ESP_LOGV(TAG, "Updating MSA3xx...");
+  ESP_LOGV(TAG, "Updating");
 
   if (!this->is_ready()) {
-    ESP_LOGV(TAG, "Component MSA3xx not ready for update");
+    ESP_LOGV(TAG, "Not ready for update");
     return;
   }
   ESP_LOGV(TAG, "Acceleration: {x = %+1.3f m/s², y = %+1.3f m/s², z = %+1.3f m/s²}; ", this->data_.x, this->data_.y,

esphome/components/my9231/my9231.cpp

@@ -1,6 +1,6 @@
 #include "my9231.h"
-#include "esphome/core/log.h"
 #include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace my9231 {
@@ -28,7 +28,7 @@ static const uint8_t MY9231_CMD_SCATTER_APDM = 0x0 << 0;
 static const uint8_t MY9231_CMD_SCATTER_PWM = 0x1 << 0;
 
 void MY9231OutputComponent::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MY9231OutputComponent...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->pin_di_->setup();
   this->pin_di_->digital_write(false);
   this->pin_dcki_->setup();
@@ -63,9 +63,11 @@ void MY9231OutputComponent::dump_config() {
   ESP_LOGCONFIG(TAG, "MY9231:");
   LOG_PIN("  DI Pin: ", this->pin_di_);
   LOG_PIN("  DCKI Pin: ", this->pin_dcki_);
-  ESP_LOGCONFIG(TAG, "  Total number of channels: %u", this->num_channels_);
-  ESP_LOGCONFIG(TAG, "  Number of chips: %u", this->num_chips_);
-  ESP_LOGCONFIG(TAG, "  Bit depth: %u", this->bit_depth_);
+  ESP_LOGCONFIG(TAG,
+                "  Total number of channels: %u\n"
+                "  Number of chips: %u\n"
+                "  Bit depth: %u",
+                this->num_channels_, this->num_chips_, this->bit_depth_);
 }
 void MY9231OutputComponent::loop() {
   if (!this->update_)

esphome/components/nau7802/nau7802.cpp

@@ -52,8 +52,8 @@ static const uint8_t POWER_PGA_CAP_EN = 0x80;
 static const uint8_t DEVICE_REV = 0x1F;
 
 void NAU7802Sensor::setup() {
+  ESP_LOGCONFIG(TAG, "Running setup for '%s'", this->name_.c_str());
   i2c::I2CRegister pu_ctrl = this->reg(PU_CTRL_REG);
-  ESP_LOGCONFIG(TAG, "Setting up NAU7802 '%s'...", this->name_.c_str());
   uint8_t rev;
 
   if (this->read_register(DEVICE_REV | READ_BIT, &rev, 1)) {
@@ -127,12 +127,14 @@ void NAU7802Sensor::dump_config() {
   LOG_I2C_DEVICE(this);
 
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with NAU7802 failed earlier, during setup");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL_FOR, this->get_name().c_str());
     return;
   }
   // Note these may differ from the values on the device if calbration has been run
-  ESP_LOGCONFIG(TAG, "  Offset Calibration: %s", to_string(this->offset_calibration_).c_str());
-  ESP_LOGCONFIG(TAG, "  Gain Calibration: %f", this->gain_calibration_);
+  ESP_LOGCONFIG(TAG,
+                "  Offset Calibration: %s\n"
+                "  Gain Calibration: %f",
+                to_string(this->offset_calibration_).c_str(), this->gain_calibration_);
 
   std::string voltage = "unknown";
   switch (this->ldo_) {

esphome/components/neopixelbus/neopixelbus_light.h

@@ -2,10 +2,10 @@
 
 #ifdef USE_ARDUINO
 
-#include "esphome/core/macros.h"
+#include "esphome/core/color.h"
 #include "esphome/core/component.h"
 #include "esphome/core/helpers.h"
-#include "esphome/core/color.h"
+#include "esphome/core/macros.h"
 #include "esphome/components/light/light_output.h"
 #include "esphome/components/light/addressable_light.h"
 

esphome/components/network/ip_address.h

@@ -5,8 +5,8 @@
 #include <string>
 #include <cstdio>
 #include <array>
-#include "esphome/core/macros.h"
 #include "esphome/core/helpers.h"
+#include "esphome/core/macros.h"
 
 #if defined(USE_ESP_IDF) || defined(USE_LIBRETINY) || USE_ARDUINO_VERSION_CODE > VERSION_CODE(3, 0, 0)
 #include <lwip/ip_addr.h>

esphome/components/network/util.cpp

@@ -9,6 +9,10 @@
 #include "esphome/components/ethernet/ethernet_component.h"
 #endif
 
+#ifdef USE_OPENTHREAD
+#include "esphome/components/openthread/openthread.h"
+#endif
+
 namespace esphome {
 namespace network {
 
@@ -23,6 +27,11 @@ bool is_connected() {
     return wifi::global_wifi_component->is_connected();
 #endif
 
+#ifdef USE_OPENTHREAD
+  if (openthread::global_openthread_component != nullptr)
+    return openthread::global_openthread_component->is_connected();
+#endif
+
 #ifdef USE_HOST
   return true;  // Assume its connected
 #endif
@@ -45,6 +54,10 @@ network::IPAddresses get_ip_addresses() {
 #ifdef USE_WIFI
   if (wifi::global_wifi_component != nullptr)
     return wifi::global_wifi_component->get_ip_addresses();
+#endif
+#ifdef USE_OPENTHREAD
+  if (openthread::global_openthread_component != nullptr)
+    return openthread::global_openthread_component->get_ip_addresses();
 #endif
   return {};
 }

esphome/components/nextion/base_component.py

@@ -14,6 +14,8 @@ CONF_COMPONENT_NAME = "component_name"
 CONF_EXIT_REPARSE_ON_START = "exit_reparse_on_start"
 CONF_FONT_ID = "font_id"
 CONF_FOREGROUND_PRESSED_COLOR = "foreground_pressed_color"
+CONF_MAX_COMMANDS_PER_LOOP = "max_commands_per_loop"
+CONF_MAX_QUEUE_SIZE = "max_queue_size"
 CONF_ON_BUFFER_OVERFLOW = "on_buffer_overflow"
 CONF_ON_PAGE = "on_page"
 CONF_ON_SETUP = "on_setup"

esphome/components/nextion/binary_sensor/nextion_binarysensor.cpp

@@ -16,7 +16,7 @@ void NextionBinarySensor::process_bool(const std::string &variable_name, bool st
 
   if (this->variable_name_ == variable_name) {
     this->publish_state(state);
-    ESP_LOGD(TAG, "Processed binarysensor \"%s\" state %s", variable_name.c_str(), state ? "ON" : "OFF");
+    ESP_LOGD(TAG, "Binary sensor: %s=%s", variable_name.c_str(), ONOFF(state));
   }
 }
 
@@ -56,13 +56,12 @@ void NextionBinarySensor::set_state(bool state, bool publish, bool send_to_nexti
     this->publish_state(state);
   } else {
     this->state = state;
-    this->has_state_ = true;
+    this->set_has_state(true);
   }
 
   this->update_component_settings();
 
-  ESP_LOGN(TAG, "Wrote state for sensor \"%s\" state %s", this->variable_name_.c_str(),
-           ONOFF(this->variable_name_.c_str()));
+  ESP_LOGN(TAG, "Write: %s=%s", this->variable_name_.c_str(), ONOFF(this->state));
 }
 
 }  // namespace nextion

esphome/components/nextion/display.py

@@ -16,10 +16,12 @@ from .base_component import (
     CONF_AUTO_WAKE_ON_TOUCH,
     CONF_COMMAND_SPACING,
     CONF_EXIT_REPARSE_ON_START,
+    CONF_MAX_COMMANDS_PER_LOOP,
+    CONF_MAX_QUEUE_SIZE,
     CONF_ON_BUFFER_OVERFLOW,
+    CONF_ON_PAGE,
     CONF_ON_SETUP,
     CONF_ON_SLEEP,
-    CONF_ON_PAGE,
     CONF_ON_WAKE,
     CONF_SKIP_CONNECTION_HANDSHAKE,
     CONF_START_UP_PAGE,
@@ -49,26 +51,35 @@ CONFIG_SCHEMA = (
     display.BASIC_DISPLAY_SCHEMA.extend(
         {
             cv.GenerateID(): cv.declare_id(Nextion),
-            cv.Optional(CONF_TFT_URL): cv.url,
+            cv.Optional(CONF_AUTO_WAKE_ON_TOUCH, default=True): cv.boolean,
             cv.Optional(CONF_BRIGHTNESS): cv.percentage,
-            cv.Optional(CONF_ON_SETUP): automation.validate_automation(
+            cv.Optional(CONF_COMMAND_SPACING): cv.All(
+                cv.positive_time_period_milliseconds,
+                cv.Range(max=TimePeriod(milliseconds=255)),
+            ),
+            cv.Optional(CONF_EXIT_REPARSE_ON_START, default=False): cv.boolean,
+            cv.Optional(CONF_MAX_COMMANDS_PER_LOOP): cv.uint16_t,
+            cv.Optional(CONF_MAX_QUEUE_SIZE): cv.positive_int,
+            cv.Optional(CONF_ON_BUFFER_OVERFLOW): automation.validate_automation(
                 {
-                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(SetupTrigger),
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(
+                        BufferOverflowTrigger
+                    ),
                 }
             ),
-            cv.Optional(CONF_ON_SLEEP): automation.validate_automation(
+            cv.Optional(CONF_ON_PAGE): automation.validate_automation(
                 {
-                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(SleepTrigger),
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(PageTrigger),
                 }
             ),
-            cv.Optional(CONF_ON_WAKE): automation.validate_automation(
+            cv.Optional(CONF_ON_SETUP): automation.validate_automation(
                 {
-                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(WakeTrigger),
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(SetupTrigger),
                 }
             ),
-            cv.Optional(CONF_ON_PAGE): automation.validate_automation(
+            cv.Optional(CONF_ON_SLEEP): automation.validate_automation(
                 {
-                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(PageTrigger),
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(SleepTrigger),
                 }
             ),
             cv.Optional(CONF_ON_TOUCH): automation.validate_automation(
@@ -76,23 +87,16 @@ CONFIG_SCHEMA = (
                     cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(TouchTrigger),
                 }
             ),
-            cv.Optional(CONF_ON_BUFFER_OVERFLOW): automation.validate_automation(
+            cv.Optional(CONF_ON_WAKE): automation.validate_automation(
                 {
-                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(
-                        BufferOverflowTrigger
-                    ),
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(WakeTrigger),
                 }
             ),
+            cv.Optional(CONF_SKIP_CONNECTION_HANDSHAKE, default=False): cv.boolean,
+            cv.Optional(CONF_START_UP_PAGE): cv.uint8_t,
+            cv.Optional(CONF_TFT_URL): cv.url,
             cv.Optional(CONF_TOUCH_SLEEP_TIMEOUT): cv.int_range(min=3, max=65535),
             cv.Optional(CONF_WAKE_UP_PAGE): cv.uint8_t,
-            cv.Optional(CONF_START_UP_PAGE): cv.uint8_t,
-            cv.Optional(CONF_AUTO_WAKE_ON_TOUCH, default=True): cv.boolean,
-            cv.Optional(CONF_EXIT_REPARSE_ON_START, default=False): cv.boolean,
-            cv.Optional(CONF_SKIP_CONNECTION_HANDSHAKE, default=False): cv.boolean,
-            cv.Optional(CONF_COMMAND_SPACING): cv.All(
-                cv.positive_time_period_milliseconds,
-                cv.Range(max=TimePeriod(milliseconds=255)),
-            ),
         }
     )
     .extend(cv.polling_component_schema("5s"))
@@ -125,6 +129,10 @@ async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     await uart.register_uart_device(var, config)
 
+    if max_queue_size := config.get(CONF_MAX_QUEUE_SIZE):
+        cg.add_define("USE_NEXTION_MAX_QUEUE_SIZE")
+        cg.add(var.set_max_queue_size(max_queue_size))
+
     if command_spacing := config.get(CONF_COMMAND_SPACING):
         cg.add_define("USE_NEXTION_COMMAND_SPACING")
         cg.add(var.set_command_spacing(command_spacing.total_milliseconds))
@@ -167,6 +175,10 @@ async def to_code(config):
 
     cg.add(var.set_skip_connection_handshake(config[CONF_SKIP_CONNECTION_HANDSHAKE]))
 
+    if max_commands_per_loop := config.get(CONF_MAX_COMMANDS_PER_LOOP):
+        cg.add_define("USE_NEXTION_MAX_COMMANDS_PER_LOOP")
+        cg.add(var.set_max_commands_per_loop(max_commands_per_loop))
+
     await display.register_display(var, config)
 
     for conf in config.get(CONF_ON_SETUP, []):