esphome 2025.4.2__py3-none-any.whl → 2025.5.0b3__py3-none-any.whl

esphome/components/mipi_spi/models/__init__.py

@@ -0,0 +1,65 @@
+from esphome.components.spi import TYPE_OCTAL, TYPE_QUAD, TYPE_SINGLE
+import esphome.config_validation as cv
+from esphome.const import CONF_HEIGHT, CONF_OFFSET_HEIGHT, CONF_OFFSET_WIDTH, CONF_WIDTH
+
+from .. import CONF_NATIVE_HEIGHT, CONF_NATIVE_WIDTH
+
+MADCTL_MY = 0x80  # Bit 7 Bottom to top
+MADCTL_MX = 0x40  # Bit 6 Right to left
+MADCTL_MV = 0x20  # Bit 5 Reverse Mode
+MADCTL_ML = 0x10  # Bit 4 LCD refresh Bottom to top
+MADCTL_RGB = 0x00  # Bit 3 Red-Green-Blue pixel order
+MADCTL_BGR = 0x08  # Bit 3 Blue-Green-Red pixel order
+MADCTL_MH = 0x04  # Bit 2 LCD refresh right to left
+
+# These bits are used instead of the above bits on some chips, where using MX and MY results in incorrect
+# partial updates.
+MADCTL_XFLIP = 0x02  # Mirror the display horizontally
+MADCTL_YFLIP = 0x01  # Mirror the display vertically
+
+DELAY_FLAG = 0xFFF  # Special flag to indicate a delay
+
+
+def delay(ms):
+    return DELAY_FLAG, ms
+
+
+class DriverChip:
+    models = {}
+
+    def __init__(
+        self,
+        name: str,
+        modes=(TYPE_SINGLE, TYPE_QUAD, TYPE_OCTAL),
+        initsequence=None,
+        **defaults,
+    ):
+        name = name.upper()
+        self.name = name
+        self.modes = modes
+        self.initsequence = initsequence
+        self.defaults = defaults
+        DriverChip.models[name] = self
+
+    def extend(self, name, **kwargs):
+        defaults = self.defaults.copy()
+        if (
+            CONF_WIDTH in defaults
+            and CONF_OFFSET_WIDTH in kwargs
+            and CONF_NATIVE_WIDTH not in defaults
+        ):
+            defaults[CONF_NATIVE_WIDTH] = defaults[CONF_WIDTH]
+        if (
+            CONF_HEIGHT in defaults
+            and CONF_OFFSET_HEIGHT in kwargs
+            and CONF_NATIVE_HEIGHT not in defaults
+        ):
+            defaults[CONF_NATIVE_HEIGHT] = defaults[CONF_HEIGHT]
+        defaults.update(kwargs)
+        return DriverChip(name, self.modes, initsequence=self.initsequence, **defaults)
+
+    def get_default(self, key, fallback=False):
+        return self.defaults.get(key, fallback)
+
+    def option(self, name, fallback=False):
+        return cv.Optional(name, default=self.get_default(name, fallback))

esphome/components/mipi_spi/models/amoled.py

@@ -0,0 +1,72 @@
+from esphome.components.spi import TYPE_QUAD
+
+from .. import MODE_RGB
+from . import DriverChip, delay
+from .commands import MIPI, NORON, PAGESEL, PIXFMT, SLPOUT, SWIRE1, SWIRE2, TEON, WRAM
+
+DriverChip(
+    "T-DISPLAY-S3-AMOLED",
+    width=240,
+    height=536,
+    cs_pin=6,
+    reset_pin=17,
+    enable_pin=38,
+    bus_mode=TYPE_QUAD,
+    brightness=0xD0,
+    color_order=MODE_RGB,
+    initsequence=(SLPOUT,),  # Requires early SLPOUT
+)
+
+DriverChip(
+    name="T-DISPLAY-S3-AMOLED-PLUS",
+    width=240,
+    height=536,
+    cs_pin=6,
+    reset_pin=17,
+    dc_pin=7,
+    enable_pin=38,
+    data_rate="40MHz",
+    brightness=0xD0,
+    color_order=MODE_RGB,
+    initsequence=(
+        (PAGESEL, 4),
+        (0x6A, 0x00),
+        (PAGESEL, 0x05),
+        (PAGESEL, 0x07),
+        (0x07, 0x4F),
+        (PAGESEL, 0x01),
+        (0x2A, 0x02),
+        (0x2B, 0x73),
+        (PAGESEL, 0x0A),
+        (0x29, 0x10),
+        (PAGESEL, 0x00),
+        (0x53, 0x20),
+        (TEON, 0x00),
+        (PIXFMT, 0x75),
+        (0xC4, 0x80),
+    ),
+)
+
+RM690B0 = DriverChip(
+    "RM690B0",
+    brightness=0xD0,
+    color_order=MODE_RGB,
+    width=480,
+    height=600,
+    initsequence=(
+        (PAGESEL, 0x20),
+        (MIPI, 0x0A),
+        (WRAM, 0x80),
+        (SWIRE1, 0x51),
+        (SWIRE2, 0x2E),
+        (PAGESEL, 0x00),
+        (0xC2, 0x00),
+        delay(10),
+        (TEON, 0x00),
+        (NORON,),
+    ),
+)
+
+T4_S3_AMOLED = RM690B0.extend("T4-S3", width=450, offset_width=16, bus_mode=TYPE_QUAD)
+
+models = {}

esphome/components/mipi_spi/models/commands.py

@@ -0,0 +1,82 @@
+# MIPI DBI commands
+
+NOP = 0x00
+SWRESET = 0x01
+RDDID = 0x04
+RDDST = 0x09
+RDMODE = 0x0A
+RDMADCTL = 0x0B
+RDPIXFMT = 0x0C
+RDIMGFMT = 0x0D
+RDSELFDIAG = 0x0F
+SLEEP_IN = 0x10
+SLPIN = 0x10
+SLEEP_OUT = 0x11
+SLPOUT = 0x11
+PTLON = 0x12
+NORON = 0x13
+INVERT_OFF = 0x20
+INVOFF = 0x20
+INVERT_ON = 0x21
+INVON = 0x21
+ALL_ON = 0x23
+WRAM = 0x24
+GAMMASET = 0x26
+MIPI = 0x26
+DISPOFF = 0x28
+DISPON = 0x29
+CASET = 0x2A
+PASET = 0x2B
+RASET = 0x2B
+RAMWR = 0x2C
+WDATA = 0x2C
+RAMRD = 0x2E
+PTLAR = 0x30
+VSCRDEF = 0x33
+TEON = 0x35
+MADCTL = 0x36
+MADCTL_CMD = 0x36
+VSCRSADD = 0x37
+IDMOFF = 0x38
+IDMON = 0x39
+COLMOD = 0x3A
+PIXFMT = 0x3A
+GETSCANLINE = 0x45
+BRIGHTNESS = 0x51
+WRDISBV = 0x51
+RDDISBV = 0x52
+WRCTRLD = 0x53
+SWIRE1 = 0x5A
+SWIRE2 = 0x5B
+IFMODE = 0xB0
+FRMCTR1 = 0xB1
+FRMCTR2 = 0xB2
+FRMCTR3 = 0xB3
+INVCTR = 0xB4
+DFUNCTR = 0xB6
+ETMOD = 0xB7
+PWCTR1 = 0xC0
+PWCTR2 = 0xC1
+PWCTR3 = 0xC2
+PWCTR4 = 0xC3
+PWCTR5 = 0xC4
+VMCTR1 = 0xC5
+IFCTR = 0xC6
+VMCTR2 = 0xC7
+GMCTR = 0xC8
+SETEXTC = 0xC8
+PWSET = 0xD0
+VMCTR = 0xD1
+PWSETN = 0xD2
+RDID4 = 0xD3
+RDINDEX = 0xD9
+RDID1 = 0xDA
+RDID2 = 0xDB
+RDID3 = 0xDC
+RDIDX = 0xDD
+GMCTRP1 = 0xE0
+GMCTRN1 = 0xE1
+CSCON = 0xF0
+PWCTR6 = 0xF6
+ADJCTL3 = 0xF7
+PAGESEL = 0xFE

esphome/components/mipi_spi/models/cyd.py

@@ -0,0 +1,10 @@
+from .ili import ILI9341
+
+ILI9341.extend(
+    "ESP32-2432S028",
+    data_rate="40MHz",
+    cs_pin=15,
+    dc_pin=2,
+)
+
+models = {}