esphome 2025.3.3__py3-none-any.whl → 2025.4.0b1__py3-none-any.whl

esphome/components/as3935/__init__.py

@@ -1,17 +1,17 @@
+from esphome import pins
 import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome import pins
 from esphome.const import (
+    CONF_CALIBRATION,
     CONF_CAPACITANCE,
     CONF_DIV_RATIO,
     CONF_INDOOR,
     CONF_IRQ_PIN,
     CONF_LIGHTNING_THRESHOLD,
     CONF_MASK_DISTURBER,
-    CONF_CALIBRATION,
-    CONF_TUNE_ANTENNA,
     CONF_NOISE_LEVEL,
     CONF_SPIKE_REJECTION,
+    CONF_TUNE_ANTENNA,
     CONF_WATCHDOG_THRESHOLD,
 )
 

esphome/components/as3935/binary_sensor.py

@@ -1,6 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import binary_sensor
+import esphome.config_validation as cv
+
 from . import AS3935, CONF_AS3935_ID
 
 DEPENDENCIES = ["as3935"]

esphome/components/as3935/sensor.py

@@ -1,13 +1,14 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_DISTANCE,
     CONF_LIGHTNING_ENERGY,
-    UNIT_KILOMETER,
-    ICON_SIGNAL_DISTANCE_VARIANT,
     ICON_FLASH,
+    ICON_SIGNAL_DISTANCE_VARIANT,
+    UNIT_KILOMETER,
 )
+
 from . import AS3935, CONF_AS3935_ID
 
 DEPENDENCIES = ["as3935"]

esphome/components/as3935_i2c/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import as3935, i2c
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 AUTO_LOAD = ["as3935"]

esphome/components/as3935_spi/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import as3935, spi
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 AUTO_LOAD = ["as3935"]

esphome/components/as5600/__init__.py

@@ -1,12 +1,12 @@
 from esphome import pins
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c
+import esphome.config_validation as cv
 from esphome.const import (
-    CONF_ID,
     CONF_DIR_PIN,
     CONF_DIRECTION,
     CONF_HYSTERESIS,
+    CONF_ID,
     CONF_RANGE,
 )
 

esphome/components/as5600/sensor/__init__.py

@@ -1,19 +1,20 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
-    CONF_ID,
-    STATE_CLASS_MEASUREMENT,
-    ICON_MAGNET,
-    ICON_ROTATE_RIGHT,
+    CONF_ANGLE,
     CONF_GAIN,
-    ENTITY_CATEGORY_DIAGNOSTIC,
+    CONF_ID,
     CONF_MAGNITUDE,
-    CONF_STATUS,
     CONF_POSITION,
-    CONF_ANGLE,
+    CONF_STATUS,
+    ENTITY_CATEGORY_DIAGNOSTIC,
+    ICON_MAGNET,
+    ICON_ROTATE_RIGHT,
+    STATE_CLASS_MEASUREMENT,
 )
-from .. import as5600_ns, AS5600Component
+
+from .. import AS5600Component, as5600_ns
 
 CODEOWNERS = ["@ammmze"]
 DEPENDENCIES = ["as5600"]

esphome/components/as7341/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_GAIN,
     CONF_ID,
@@ -9,7 +9,6 @@ from esphome.const import (
     STATE_CLASS_MEASUREMENT,
 )
 
-
 CODEOWNERS = ["@mrgnr"]
 DEPENDENCIES = ["i2c"]
 

esphome/components/at581x/__init__.py

@@ -1,13 +1,9 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation, core
-from esphome.components import i2c
 from esphome.automation import maybe_simple_id
-from esphome.const import (
-    CONF_ID,
-    CONF_FREQUENCY,
-)
-
+import esphome.codegen as cg
+from esphome.components import i2c
+import esphome.config_validation as cv
+from esphome.const import CONF_FREQUENCY, CONF_ID
 
 CODEOWNERS = ["@X-Ryl669"]
 DEPENDENCIES = ["i2c"]

esphome/components/at581x/switch/__init__.py

@@ -1,10 +1,8 @@
 import esphome.codegen as cg
 from esphome.components import switch
 import esphome.config_validation as cv
-from esphome.const import (
-    DEVICE_CLASS_SWITCH,
-    ICON_WIFI,
-)
+from esphome.const import DEVICE_CLASS_SWITCH, ICON_WIFI
+
 from .. import CONF_AT581X_ID, AT581XComponent, at581x_ns
 
 DEPENDENCIES = ["at581x"]

esphome/components/atc_mithermometer/sensor.py

@@ -1,14 +1,14 @@
 import esphome.codegen as cg
+from esphome.components import esp32_ble_tracker, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, esp32_ble_tracker
 from esphome.const import (
     CONF_BATTERY_LEVEL,
     CONF_BATTERY_VOLTAGE,
-    CONF_MAC_ADDRESS,
     CONF_HUMIDITY,
+    CONF_ID,
+    CONF_MAC_ADDRESS,
     CONF_SIGNAL_STRENGTH,
     CONF_TEMPERATURE,
-    CONF_ID,
     DEVICE_CLASS_BATTERY,
     DEVICE_CLASS_HUMIDITY,
     DEVICE_CLASS_SIGNAL_STRENGTH,

esphome/components/b_parasite/sensor.py

@@ -1,13 +1,13 @@
 import esphome.codegen as cg
+from esphome.components import esp32_ble_tracker, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, esp32_ble_tracker
 from esphome.const import (
     CONF_BATTERY_VOLTAGE,
     CONF_HUMIDITY,
     CONF_ID,
     CONF_ILLUMINANCE,
-    CONF_MOISTURE,
     CONF_MAC_ADDRESS,
+    CONF_MOISTURE,
     CONF_TEMPERATURE,
     DEVICE_CLASS_HUMIDITY,
     DEVICE_CLASS_ILLUMINANCE,

esphome/components/ballu/climate.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import climate_ir
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 AUTO_LOAD = ["climate_ir"]

esphome/components/bang_bang/climate.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
+import esphome.codegen as cg
 from esphome.components import climate, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_AWAY_CONFIG,
     CONF_COOL_ACTION,

esphome/components/bedjet/__init__.py

@@ -1,11 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import ble_client, time
-from esphome.const import (
-    CONF_ID,
-    CONF_RECEIVE_TIMEOUT,
-    CONF_TIME_ID,
-)
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, CONF_RECEIVE_TIMEOUT, CONF_TIME_ID
 
 CODEOWNERS = ["@jhansche"]
 DEPENDENCIES = ["ble_client"]

esphome/components/bedjet/climate/__init__.py

@@ -1,8 +1,8 @@
 import logging
 
 import esphome.codegen as cg
+from esphome.components import ble_client, climate
 import esphome.config_validation as cv
-from esphome.components import climate, ble_client
 from esphome.const import (
     CONF_HEAT_MODE,
     CONF_ID,
@@ -10,11 +10,8 @@ from esphome.const import (
     CONF_TEMPERATURE_SOURCE,
     CONF_TIME_ID,
 )
-from .. import (
-    BEDJET_CLIENT_SCHEMA,
-    bedjet_ns,
-    register_bedjet_child,
-)
+
+from .. import BEDJET_CLIENT_SCHEMA, bedjet_ns, register_bedjet_child
 
 _LOGGER = logging.getLogger(__name__)
 CODEOWNERS = ["@jhansche"]

esphome/components/bedjet/fan/__init__.py

@@ -1,16 +1,11 @@
 import logging
 
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import fan
-from esphome.const import (
-    CONF_ID,
-)
-from .. import (
-    BEDJET_CLIENT_SCHEMA,
-    bedjet_ns,
-    register_bedjet_child,
-)
+import esphome.config_validation as cv
+from esphome.const import CONF_ID
+
+from .. import BEDJET_CLIENT_SCHEMA, bedjet_ns, register_bedjet_child
 
 _LOGGER = logging.getLogger(__name__)
 CODEOWNERS = ["@jhansche"]

esphome/components/bedjet/sensor/__init__.py

@@ -1,19 +1,16 @@
 import logging
 
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     DEVICE_CLASS_TEMPERATURE,
     STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
 )
-from .. import (
-    BEDJET_CLIENT_SCHEMA,
-    bedjet_ns,
-    register_bedjet_child,
-)
+
+from .. import BEDJET_CLIENT_SCHEMA, bedjet_ns, register_bedjet_child
 
 _LOGGER = logging.getLogger(__name__)
 CODEOWNERS = ["@jhansche", "@javawizard"]

esphome/components/beken_spi_led_strip/light.py

@@ -1,9 +1,9 @@
 from dataclasses import dataclass
 
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import libretiny, light
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CHIPSET,
     CONF_IS_RGBW,

esphome/components/bh1750/sensor.py

@@ -1,11 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
-from esphome.const import (
-    DEVICE_CLASS_ILLUMINANCE,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_LUX,
-)
+import esphome.config_validation as cv
+from esphome.const import DEVICE_CLASS_ILLUMINANCE, STATE_CLASS_MEASUREMENT, UNIT_LUX
 
 DEPENDENCIES = ["i2c"]
 CODEOWNERS = ["@OttoWinter"]

esphome/components/binary/fan/__init__.py

@@ -1,12 +1,13 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import fan, output
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_DIRECTION_OUTPUT,
     CONF_OSCILLATION_OUTPUT,
     CONF_OUTPUT,
     CONF_OUTPUT_ID,
 )
+
 from .. import binary_ns
 
 BinaryFan = binary_ns.class_("BinaryFan", fan.Fan, cg.Component)

esphome/components/binary/light/__init__.py

@@ -1,7 +1,8 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import light, output
-from esphome.const import CONF_OUTPUT_ID, CONF_OUTPUT
+import esphome.config_validation as cv
+from esphome.const import CONF_OUTPUT, CONF_OUTPUT_ID
+
 from .. import binary_ns
 
 BinaryLightOutput = binary_ns.class_("BinaryLightOutput", light.LightOutput)

esphome/components/binary_sensor_map/sensor.py

@@ -1,15 +1,14 @@
 import esphome.codegen as cg
+from esphome.components import binary_sensor, sensor
 import esphome.config_validation as cv
-
-from esphome.components import sensor, binary_sensor
 from esphome.const import (
-    CONF_CHANNELS,
-    CONF_VALUE,
-    CONF_TYPE,
-    ICON_CHECK_CIRCLE_OUTLINE,
     CONF_BINARY_SENSOR,
+    CONF_CHANNELS,
     CONF_GROUP,
     CONF_SUM,
+    CONF_TYPE,
+    CONF_VALUE,
+    ICON_CHECK_CIRCLE_OUTLINE,
 )
 
 DEPENDENCIES = ["binary_sensor"]

esphome/components/bl0939/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor, uart
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     CONF_VOLTAGE,

esphome/components/bl0940/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor, uart
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CURRENT,
     CONF_ENERGY,
@@ -12,15 +12,15 @@ from esphome.const import (
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_ENERGY,
     DEVICE_CLASS_POWER,
-    DEVICE_CLASS_VOLTAGE,
     DEVICE_CLASS_TEMPERATURE,
+    DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
+    STATE_CLASS_TOTAL_INCREASING,
     UNIT_AMPERE,
     UNIT_CELSIUS,
     UNIT_KILOWATT_HOURS,
     UNIT_VOLT,
     UNIT_WATT,
-    STATE_CLASS_TOTAL_INCREASING,
 )
 
 DEPENDENCIES = ["uart"]

esphome/components/ble_client/__init__.py

@@ -67,7 +67,7 @@ CONF_AUTO_CONNECT = "auto_connect"
 
 MULTI_CONF = True
 
-CONFIG_SCHEMA = (
+CONFIG_SCHEMA = cv.All(
     cv.Schema(
         {
             cv.GenerateID(): cv.declare_id(BLEClient),
@@ -114,7 +114,8 @@ CONFIG_SCHEMA = (
         }
     )
     .extend(cv.COMPONENT_SCHEMA)
-    .extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA)
+    .extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA),
+    esp32_ble_tracker.consume_connection_slots(1, "ble_client"),
 )
 
 CONF_BLE_CLIENT_ID = "ble_client_id"

esphome/components/ble_client/sensor/__init__.py

@@ -5,13 +5,13 @@ import esphome.config_validation as cv
 from esphome.const import (
     CONF_CHARACTERISTIC_UUID,
     CONF_LAMBDA,
+    CONF_NOTIFY,
     CONF_SERVICE_UUID,
     CONF_TRIGGER_ID,
     CONF_TYPE,
     DEVICE_CLASS_SIGNAL_STRENGTH,
     STATE_CLASS_MEASUREMENT,
     UNIT_DECIBEL_MILLIWATT,
-    CONF_NOTIFY,
 )
 
 from .. import ble_client_ns

esphome/components/ble_client/text_sensor/__init__.py

@@ -5,8 +5,8 @@ import esphome.config_validation as cv
 from esphome.const import (
     CONF_CHARACTERISTIC_UUID,
     CONF_ID,
-    CONF_SERVICE_UUID,
     CONF_NOTIFY,
+    CONF_SERVICE_UUID,
     CONF_TRIGGER_ID,
 )
 

esphome/components/bluetooth_proxy/__init__.py

@@ -8,9 +8,10 @@ AUTO_LOAD = ["esp32_ble_client", "esp32_ble_tracker"]
 DEPENDENCIES = ["api", "esp32"]
 CODEOWNERS = ["@jesserockz"]
 
+CONF_CONNECTION_SLOTS = "connection_slots"
 CONF_CACHE_SERVICES = "cache_services"
 CONF_CONNECTIONS = "connections"
-MAX_CONNECTIONS = 3
+DEFAULT_CONNECTION_SLOTS = 3
 
 bluetooth_proxy_ns = cg.esphome_ns.namespace("bluetooth_proxy")
 
@@ -34,32 +35,43 @@ def validate_connections(config):
             raise cv.Invalid(
                 "Connections can only be used if the proxy is set to active"
             )
-    else:
-        if config[CONF_ACTIVE]:
-            conf = config.copy()
-            conf[CONF_CONNECTIONS] = [
-                CONNECTION_SCHEMA({}) for _ in range(MAX_CONNECTIONS)
-            ]
-            return conf
+    elif config[CONF_ACTIVE]:
+        connection_slots: int = config[CONF_CONNECTION_SLOTS]
+        esp32_ble_tracker.consume_connection_slots(connection_slots, "bluetooth_proxy")(
+            config
+        )
+        return {
+            **config,
+            CONF_CONNECTIONS: [CONNECTION_SCHEMA({}) for _ in range(connection_slots)],
+        }
     return config
 
 
 CONFIG_SCHEMA = cv.All(
-    cv.Schema(
-        {
-            cv.GenerateID(): cv.declare_id(BluetoothProxy),
-            cv.Optional(CONF_ACTIVE, default=False): cv.boolean,
-            cv.SplitDefault(CONF_CACHE_SERVICES, esp32_idf=True): cv.All(
-                cv.only_with_esp_idf, cv.boolean
-            ),
-            cv.Optional(CONF_CONNECTIONS): cv.All(
-                cv.ensure_list(CONNECTION_SCHEMA),
-                cv.Length(min=1, max=MAX_CONNECTIONS),
-            ),
-        }
-    )
-    .extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA)
-    .extend(cv.COMPONENT_SCHEMA),
+    (
+        cv.Schema(
+            {
+                cv.GenerateID(): cv.declare_id(BluetoothProxy),
+                cv.Optional(CONF_ACTIVE, default=False): cv.boolean,
+                cv.SplitDefault(CONF_CACHE_SERVICES, esp32_idf=True): cv.All(
+                    cv.only_with_esp_idf, cv.boolean
+                ),
+                cv.Optional(
+                    CONF_CONNECTION_SLOTS,
+                    default=DEFAULT_CONNECTION_SLOTS,
+                ): cv.All(
+                    cv.positive_int,
+                    cv.Range(min=1, max=esp32_ble_tracker.max_connections()),
+                ),
+                cv.Optional(CONF_CONNECTIONS): cv.All(
+                    cv.ensure_list(CONNECTION_SCHEMA),
+                    cv.Length(min=1, max=esp32_ble_tracker.max_connections()),
+                ),
+            }
+        )
+        .extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA)
+        .extend(cv.COMPONENT_SCHEMA)
+    ),
     validate_connections,
 )
 

esphome/components/bme280_base/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_HUMIDITY,
     CONF_ID,

esphome/components/bme280_i2c/sensor.py

@@ -1,7 +1,8 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c
-from ..bme280_base import to_code_base, CONFIG_SCHEMA_BASE
+import esphome.config_validation as cv
+
+from ..bme280_base import CONFIG_SCHEMA_BASE, to_code_base
 
 AUTO_LOAD = ["bme280_base"]
 DEPENDENCIES = ["i2c"]

esphome/components/bme280_spi/sensor.py

@@ -1,7 +1,8 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import spi
-from ..bme280_base import to_code_base, CONFIG_SCHEMA_BASE
+import esphome.config_validation as cv
+
+from ..bme280_base import CONFIG_SCHEMA_BASE, to_code_base
 
 AUTO_LOAD = ["bme280_base"]
 CODEOWNERS = ["@apbodrov"]

esphome/components/bme680/sensor.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import core
+import esphome.codegen as cg
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_DURATION,
     CONF_GAS_RESISTANCE,
@@ -15,11 +15,11 @@ from esphome.const import (
     DEVICE_CLASS_HUMIDITY,
     DEVICE_CLASS_PRESSURE,
     DEVICE_CLASS_TEMPERATURE,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_OHM,
     ICON_GAS_CYLINDER,
+    STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
     UNIT_HECTOPASCAL,
+    UNIT_OHM,
     UNIT_PERCENT,
 )
 

esphome/components/bme680_bsec/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import esp32, i2c
 import esphome.config_validation as cv
-from esphome.components import i2c, esp32
 from esphome.const import CONF_ID, CONF_SAMPLE_RATE, CONF_TEMPERATURE_OFFSET
 
 CODEOWNERS = ["@trvrnrth"]

esphome/components/bme680_bsec/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_GAS_RESISTANCE,
     CONF_HUMIDITY,
@@ -22,11 +22,8 @@ from esphome.const import (
     UNIT_PARTS_PER_MILLION,
     UNIT_PERCENT,
 )
-from . import (
-    BME680BSECComponent,
-    CONF_BME680_BSEC_ID,
-    SAMPLE_RATE_OPTIONS,
-)
+
+from . import CONF_BME680_BSEC_ID, SAMPLE_RATE_OPTIONS, BME680BSECComponent
 
 DEPENDENCIES = ["bme680_bsec"]
 

esphome/components/bme680_bsec/text_sensor.py

@@ -1,8 +1,9 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import text_sensor
+import esphome.config_validation as cv
 from esphome.const import CONF_IAQ_ACCURACY
-from . import BME680BSECComponent, CONF_BME680_BSEC_ID
+
+from . import CONF_BME680_BSEC_ID, BME680BSECComponent
 
 DEPENDENCIES = ["bme680_bsec"]