esphome 2025.2.1__py3-none-any.whl → 2025.3.0__py3-none-any.whl

esphome/components/haier/climate.py

@@ -1,9 +1,15 @@
-import logging
+import logging
+
+from esphome import automation
 import esphome.codegen as cg
+from esphome.components import climate, logger, uart
+from esphome.components.climate import (
+    CONF_CURRENT_TEMPERATURE,
+    ClimateMode,
+    ClimatePreset,
+    ClimateSwingMode,
+)
 import esphome.config_validation as cv
-import esphome.final_validate as fv
-from esphome.components import uart, climate, logger
-from esphome import automation
 from esphome.const import (
     CONF_BEEPER,
     CONF_DISPLAY,
@@ -24,12 +30,7 @@ from esphome.const import (
     CONF_VISUAL,
     CONF_WIFI,
 )
-from esphome.components.climate import (
-    ClimateMode,
-    ClimatePreset,
-    ClimateSwingMode,
-    CONF_CURRENT_TEMPERATURE,
-)
+import esphome.final_validate as fv
 
 _LOGGER = logging.getLogger(__name__)
 

esphome/components/hbridge/switch/hbridge_switch.cpp

@@ -12,7 +12,7 @@ float HBridgeSwitch::get_setup_priority() const { return setup_priority::HARDWAR
 void HBridgeSwitch::setup() {
   ESP_LOGCONFIG(TAG, "Setting up H-Bridge Switch '%s'...", this->name_.c_str());
 
-  optional<bool> initial_state = this->get_initial_state_with_restore_mode().value_or(false);
+  optional<bool> initial_state = this->get_initial_state_with_restore_mode();
 
   // Like GPIOSwitch does, set the pin state both before and after pin setup()
   this->on_pin_->digital_write(false);
@@ -24,7 +24,7 @@ void HBridgeSwitch::setup() {
   this->off_pin_->digital_write(false);
 
   if (initial_state.has_value())
-    this->write_state(initial_state);
+    this->write_state(initial_state.value());
 }
 
 void HBridgeSwitch::dump_config() {

esphome/components/heatpumpir/climate.py

@@ -53,6 +53,7 @@ PROTOCOLS = {
     "mitsubishi_sez": Protocol.PROTOCOL_MITSUBISHI_SEZ,
     "panasonic_ckp": Protocol.PROTOCOL_PANASONIC_CKP,
     "panasonic_dke": Protocol.PROTOCOL_PANASONIC_DKE,
+    "panasonic_eke": Protocol.PROTOCOL_PANASONIC_EKE,
     "panasonic_jke": Protocol.PROTOCOL_PANASONIC_JKE,
     "panasonic_lke": Protocol.PROTOCOL_PANASONIC_LKE,
     "panasonic_nke": Protocol.PROTOCOL_PANASONIC_NKE,
@@ -127,6 +128,6 @@ def to_code(config):
     cg.add(var.set_max_temperature(config[CONF_MAX_TEMPERATURE]))
     cg.add(var.set_min_temperature(config[CONF_MIN_TEMPERATURE]))
 
-    cg.add_library("tonia/HeatpumpIR", "1.0.27")
+    cg.add_library("tonia/HeatpumpIR", "1.0.32")
     if CORE.is_libretiny:
         CORE.add_platformio_option("lib_ignore", "IRremoteESP8266")

esphome/components/heatpumpir/heatpumpir.cpp

@@ -47,6 +47,7 @@ const std::map<Protocol, std::function<HeatpumpIR *()>> PROTOCOL_CONSTRUCTOR_MAP
     {PROTOCOL_MITSUBISHI_SEZ, []() { return new MitsubishiSEZKDXXHeatpumpIR(); }},           // NOLINT
     {PROTOCOL_PANASONIC_CKP, []() { return new PanasonicCKPHeatpumpIR(); }},                 // NOLINT
     {PROTOCOL_PANASONIC_DKE, []() { return new PanasonicDKEHeatpumpIR(); }},                 // NOLINT
+    {PROTOCOL_PANASONIC_EKE, []() { return new PanasonicEKEHeatpumpIR(); }},                 // NOLINT
     {PROTOCOL_PANASONIC_JKE, []() { return new PanasonicJKEHeatpumpIR(); }},                 // NOLINT
     {PROTOCOL_PANASONIC_LKE, []() { return new PanasonicLKEHeatpumpIR(); }},                 // NOLINT
     {PROTOCOL_PANASONIC_NKE, []() { return new PanasonicNKEHeatpumpIR(); }},                 // NOLINT

esphome/components/heatpumpir/heatpumpir.h

@@ -47,6 +47,7 @@ enum Protocol {
   PROTOCOL_MITSUBISHI_SEZ,
   PROTOCOL_PANASONIC_CKP,
   PROTOCOL_PANASONIC_DKE,
+  PROTOCOL_PANASONIC_EKE,
   PROTOCOL_PANASONIC_JKE,
   PROTOCOL_PANASONIC_LKE,
   PROTOCOL_PANASONIC_NKE,

esphome/components/i2c/__init__.py

@@ -1,23 +1,23 @@
+from esphome import pins
 import esphome.codegen as cg
 import esphome.config_validation as cv
-import esphome.final_validate as fv
-from esphome import pins
 from esphome.const import (
+    CONF_ADDRESS,
     CONF_FREQUENCY,
-    CONF_TIMEOUT,
+    CONF_I2C_ID,
     CONF_ID,
     CONF_INPUT,
     CONF_OUTPUT,
     CONF_SCAN,
     CONF_SCL,
     CONF_SDA,
-    CONF_ADDRESS,
-    CONF_I2C_ID,
+    CONF_TIMEOUT,
     PLATFORM_ESP32,
     PLATFORM_ESP8266,
     PLATFORM_RP2040,
 )
-from esphome.core import coroutine_with_priority, CORE
+from esphome.core import CORE, coroutine_with_priority
+import esphome.final_validate as fv
 
 CODEOWNERS = ["@esphome/core"]
 i2c_ns = cg.esphome_ns.namespace("i2c")

esphome/components/i2c/i2c_bus_esp_idf.cpp

@@ -8,6 +8,10 @@
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 
+#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 3, 0)
+#define SOC_HP_I2C_NUM SOC_I2C_NUM
+#endif
+
 namespace esphome {
 namespace i2c {
 
@@ -17,14 +21,14 @@ void IDFI2CBus::setup() {
   ESP_LOGCONFIG(TAG, "Setting up I2C bus...");
   static i2c_port_t next_port = I2C_NUM_0;
   port_ = next_port;
-#if SOC_I2C_NUM > 1
+#if SOC_HP_I2C_NUM > 1
   next_port = (next_port == I2C_NUM_0) ? I2C_NUM_1 : I2C_NUM_MAX;
 #else
   next_port = I2C_NUM_MAX;
 #endif
 
   if (port_ == I2C_NUM_MAX) {
-    ESP_LOGE(TAG, "Too many I2C buses configured. Max %u supported.", SOC_I2C_NUM);
+    ESP_LOGE(TAG, "Too many I2C buses configured. Max %u supported.", SOC_HP_I2C_NUM);
     this->mark_failed();
     return;
   }

esphome/components/i2s_audio/speaker/i2s_audio_speaker.cpp

@@ -203,7 +203,7 @@ size_t I2SAudioSpeaker::play(const uint8_t *data, size_t length, TickType_t tick
     this->start();
   }
 
-  if ((this->state_ != speaker::STATE_RUNNING) || (this->audio_ring_buffer_.use_count() == 1)) {
+  if ((this->state_ != speaker::STATE_RUNNING) || (this->audio_ring_buffer_.use_count() != 1)) {
     // Unable to write data to a running speaker, so delay the max amount of time so it can get ready
     vTaskDelay(ticks_to_wait);
     ticks_to_wait = 0;

esphome/components/ili9xxx/display.py

@@ -57,6 +57,7 @@ ColorOrder = display.display_ns.enum("ColorMode")
 
 MODELS = {
     "GC9A01A": ili9xxx_ns.class_("ILI9XXXGC9A01A", ILI9XXXDisplay),
+    "GC9D01N": ili9xxx_ns.class_("ILI9XXXGC9D01N", ILI9XXXDisplay),
     "M5STACK": ili9xxx_ns.class_("ILI9XXXM5Stack", ILI9XXXDisplay),
     "M5CORE": ili9xxx_ns.class_("ILI9XXXM5CORE", ILI9XXXDisplay),
     "TFT_2.4": ili9xxx_ns.class_("ILI9XXXILI9341", ILI9XXXDisplay),

esphome/components/ili9xxx/ili9xxx_display.h

@@ -272,6 +272,11 @@ class ILI9XXXGC9A01A : public ILI9XXXDisplay {
   ILI9XXXGC9A01A() : ILI9XXXDisplay(INITCMD_GC9A01A, 240, 240) {}
 };
 
+class ILI9XXXGC9D01N : public ILI9XXXDisplay {
+ public:
+  ILI9XXXGC9D01N() : ILI9XXXDisplay(INITCMD_GC9D01N, 160, 160) {}
+};
+
 //-----------   ILI9XXX_24_TFT display --------------
 class ILI9XXXST7735 : public ILI9XXXDisplay {
  public:

esphome/components/ili9xxx/ili9xxx_init.h

@@ -367,6 +367,65 @@ static const uint8_t PROGMEM INITCMD_GC9A01A[] = {
   0x00                  // End of list
 };
 
+static const uint8_t PROGMEM INITCMD_GC9D01N[] = {
+  // Enable Inter_command
+  0xFE, 0,          // Inter Register Enable 1 (FEh)
+  0xEF, 0,          // Inter Register Enable 2 (EFh)
+  // Inter_command is now enabled
+  0x80, 1, 0xFF,
+  0x81, 1, 0xFF,
+  0x82, 1, 0xFF,
+  0x83, 1, 0xFF,
+  0x84, 1, 0xFF,
+  0x85, 1, 0xFF,
+  0x86, 1, 0xFF,
+  0x87, 1, 0xFF,
+  0x88, 1, 0xFF,
+  0x89, 1, 0xFF,
+  0x8A, 1, 0xFF,
+  0x8B, 1, 0xFF,
+  0x8C, 1, 0xFF,
+  0x8D, 1, 0xFF,
+  0x8E, 1, 0xFF,
+  0x8F, 1, 0xFF,
+  0X3A, 1, 0x05,    // COLMOD: Pixel Format Set (3Ah) MCU interface, 16 bits / pixel
+  0xEC, 1, 0x01,    // Inversion (ECh) DINV=1+2H1V column for Dual Gate (BFh=0)
+                    // According to datasheet Inversion (ECh) value 0x01 isn't valid, but Lilygo uses it everywhere
+  0x74, 7, 0x02, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x98, 1, 0x3e,
+  0x99, 1, 0x3e,
+  0xB5, 2, 0x0D, 0x0D,    // Blanking Porch Control (B5h) VFP=14 VBP=14 HBP=Off
+  0x60, 4, 0x38, 0x0F, 0x79, 0x67,
+  0x61, 4, 0x38, 0x11, 0x79, 0x67,
+  0x64, 6, 0x38, 0x17, 0x71, 0x5F, 0x79, 0x67,
+  0x65, 6, 0x38, 0x13, 0x71, 0x5B, 0x79, 0x67,
+  0x6A, 2, 0x00, 0x00,
+  0x6C, 7, 0x22, 0x02, 0x22, 0x02, 0x22, 0x22, 0x50,
+  0x6E, 32, 0x03, 0x03, 0x01, 0x01, 0x00, 0x00, 0x0F, 0x0F,
+            0x0D, 0x0D, 0x0B, 0x0B, 0x09, 0x09, 0x00, 0x00,
+            0x00, 0x00, 0x0A, 0x0A, 0x0C, 0x0C, 0x0E, 0x0E,
+            0x10, 0x10, 0x00, 0x00, 0x02, 0x02, 0x04, 0x04,
+  0xBF, 1, 0x01,    // Dual-Single gate select (BFh) 01h = dual gate mode
+  0xF9, 1, 0x40,
+  0x9B, 5, 0x3B, 0x93, 0x33, 0x7F, 0x00,
+  0x7E, 1, 0x30,
+  0x70, 6, 0x0D, 0x02, 0x08, 0x0D, 0x02, 0x08,
+  0x71, 3, 0x0D, 0x02, 0x08,
+  0x91, 2, 0x0E, 0x09,
+  // Set VREG1A, VREG1B, VREG2A, VREG2B voltage
+  // According to datasheet set either 0xC3/0xC4 or 0xC9 only, but Lilygo sets both of them
+  0xC3, 5, 0x19, 0xC4, 0x19, 0xC9, 0x3C,
+  0xF0, 6, 0x53, 0x15, 0x0A, 0x04, 0x00, 0x3E,    // SET_GAMMA1 (F0h)
+  0xF1, 6, 0x56, 0xA8, 0x7F, 0x33, 0x34, 0x5F,    // SET_GAMMA2 (F1h)
+  0xF2, 6, 0x53, 0x15, 0x0A, 0x04, 0x00, 0x3A,    // SET_GAMMA3 (F2h)
+  0xF3, 6, 0x52, 0xA4, 0x7F, 0x33, 0x34, 0xDF,    // SET_GAMMA4 (F3h)
+  ILI9XXX_SLPOUT, 0,      // Sleep Out Mode (11h)
+  ILI9XXX_DELAY(10),
+  ILI9XXX_DISPON, 0,      // Display ON (29h)
+  ILI9XXX_DELAY(20),
+  0x00                    // End of list
+};
+
 static const uint8_t PROGMEM INITCMD_ST7735[] = {
     ILI9XXX_SWRESET, 0,         // Soft reset, then delay 10ms
     ILI9XXX_DELAY(10),

esphome/components/ld2450/__init__.py

@@ -0,0 +1,51 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import uart
+from esphome.const import (
+    CONF_ID,
+    CONF_THROTTLE,
+)
+
+DEPENDENCIES = ["uart"]
+CODEOWNERS = ["@hareeshmu"]
+MULTI_CONF = True
+
+ld2450_ns = cg.esphome_ns.namespace("ld2450")
+LD2450Component = ld2450_ns.class_("LD2450Component", cg.Component, uart.UARTDevice)
+
+CONF_LD2450_ID = "ld2450_id"
+
+CONFIG_SCHEMA = cv.All(
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(LD2450Component),
+            cv.Optional(CONF_THROTTLE, default="1000ms"): cv.All(
+                cv.positive_time_period_milliseconds,
+                cv.Range(min=cv.TimePeriod(milliseconds=1)),
+            ),
+        }
+    )
+    .extend(uart.UART_DEVICE_SCHEMA)
+    .extend(cv.COMPONENT_SCHEMA)
+)
+
+LD2450BaseSchema = cv.Schema(
+    {
+        cv.GenerateID(CONF_LD2450_ID): cv.use_id(LD2450Component),
+    },
+)
+
+FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
+    "ld2450",
+    require_tx=True,
+    require_rx=True,
+    parity="NONE",
+    stop_bits=1,
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await uart.register_uart_device(var, config)
+    cg.add(var.set_throttle(config[CONF_THROTTLE]))

esphome/components/ld2450/binary_sensor.py

@@ -0,0 +1,47 @@
+import esphome.codegen as cg
+from esphome.components import binary_sensor
+import esphome.config_validation as cv
+from esphome.const import (
+    CONF_HAS_MOVING_TARGET,
+    CONF_HAS_STILL_TARGET,
+    CONF_HAS_TARGET,
+    DEVICE_CLASS_MOTION,
+    DEVICE_CLASS_OCCUPANCY,
+)
+
+from . import CONF_LD2450_ID, LD2450Component
+
+DEPENDENCIES = ["ld2450"]
+
+ICON_MEDITATION = "mdi:meditation"
+ICON_SHIELD_ACCOUNT = "mdi:shield-account"
+ICON_TARGET_ACCOUNT = "mdi:target-account"
+
+CONFIG_SCHEMA = {
+    cv.GenerateID(CONF_LD2450_ID): cv.use_id(LD2450Component),
+    cv.Optional(CONF_HAS_TARGET): binary_sensor.binary_sensor_schema(
+        device_class=DEVICE_CLASS_OCCUPANCY,
+        icon=ICON_SHIELD_ACCOUNT,
+    ),
+    cv.Optional(CONF_HAS_MOVING_TARGET): binary_sensor.binary_sensor_schema(
+        device_class=DEVICE_CLASS_MOTION,
+        icon=ICON_TARGET_ACCOUNT,
+    ),
+    cv.Optional(CONF_HAS_STILL_TARGET): binary_sensor.binary_sensor_schema(
+        device_class=DEVICE_CLASS_OCCUPANCY,
+        icon=ICON_MEDITATION,
+    ),
+}
+
+
+async def to_code(config):
+    ld2450_component = await cg.get_variable(config[CONF_LD2450_ID])
+    if has_target_config := config.get(CONF_HAS_TARGET):
+        sens = await binary_sensor.new_binary_sensor(has_target_config)
+        cg.add(ld2450_component.set_target_binary_sensor(sens))
+    if has_moving_target_config := config.get(CONF_HAS_MOVING_TARGET):
+        sens = await binary_sensor.new_binary_sensor(has_moving_target_config)
+        cg.add(ld2450_component.set_moving_target_binary_sensor(sens))
+    if has_still_target_config := config.get(CONF_HAS_STILL_TARGET):
+        sens = await binary_sensor.new_binary_sensor(has_still_target_config)
+        cg.add(ld2450_component.set_still_target_binary_sensor(sens))

esphome/components/ld2450/button/__init__.py

@@ -0,0 +1,45 @@
+import esphome.codegen as cg
+from esphome.components import button
+import esphome.config_validation as cv
+from esphome.const import (
+    CONF_FACTORY_RESET,
+    CONF_RESTART,
+    DEVICE_CLASS_RESTART,
+    ENTITY_CATEGORY_CONFIG,
+    ENTITY_CATEGORY_DIAGNOSTIC,
+    ICON_RESTART,
+    ICON_RESTART_ALERT,
+)
+
+from .. import CONF_LD2450_ID, LD2450Component, ld2450_ns
+
+ResetButton = ld2450_ns.class_("ResetButton", button.Button)
+RestartButton = ld2450_ns.class_("RestartButton", button.Button)
+
+CONFIG_SCHEMA = {
+    cv.GenerateID(CONF_LD2450_ID): cv.use_id(LD2450Component),
+    cv.Optional(CONF_FACTORY_RESET): button.button_schema(
+        ResetButton,
+        device_class=DEVICE_CLASS_RESTART,
+        entity_category=ENTITY_CATEGORY_CONFIG,
+        icon=ICON_RESTART_ALERT,
+    ),
+    cv.Optional(CONF_RESTART): button.button_schema(
+        RestartButton,
+        device_class=DEVICE_CLASS_RESTART,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+        icon=ICON_RESTART,
+    ),
+}
+
+
+async def to_code(config):
+    ld2450_component = await cg.get_variable(config[CONF_LD2450_ID])
+    if factory_reset_config := config.get(CONF_FACTORY_RESET):
+        b = await button.new_button(factory_reset_config)
+        await cg.register_parented(b, config[CONF_LD2450_ID])
+        cg.add(ld2450_component.set_reset_button(b))
+    if restart_config := config.get(CONF_RESTART):
+        b = await button.new_button(restart_config)
+        await cg.register_parented(b, config[CONF_LD2450_ID])
+        cg.add(ld2450_component.set_restart_button(b))

esphome/components/ld2450/button/reset_button.cpp

@@ -0,0 +1,9 @@
+#include "reset_button.h"
+
+namespace esphome {
+namespace ld2450 {
+
+void ResetButton::press_action() { this->parent_->factory_reset(); }
+
+}  // namespace ld2450
+}  // namespace esphome

esphome/components/ld2450/button/reset_button.h

@@ -0,0 +1,18 @@
+#pragma once
+
+#include "esphome/components/button/button.h"
+#include "../ld2450.h"
+
+namespace esphome {
+namespace ld2450 {
+
+class ResetButton : public button::Button, public Parented<LD2450Component> {
+ public:
+  ResetButton() = default;
+
+ protected:
+  void press_action() override;
+};
+
+}  // namespace ld2450
+}  // namespace esphome

esphome/components/ld2450/button/restart_button.cpp

@@ -0,0 +1,9 @@
+#include "restart_button.h"
+
+namespace esphome {
+namespace ld2450 {
+
+void RestartButton::press_action() { this->parent_->restart_and_read_all_info(); }
+
+}  // namespace ld2450
+}  // namespace esphome

esphome/components/ld2450/button/restart_button.h

@@ -0,0 +1,18 @@
+#pragma once
+
+#include "esphome/components/button/button.h"
+#include "../ld2450.h"
+
+namespace esphome {
+namespace ld2450 {
+
+class RestartButton : public button::Button, public Parented<LD2450Component> {
+ public:
+  RestartButton() = default;
+
+ protected:
+  void press_action() override;
+};
+
+}  // namespace ld2450
+}  // namespace esphome