esphome 2024.9.2__py3-none-any.whl → 2024.10.0b1__py3-none-any.whl

esphome/components/haier/haier_base.cpp

@@ -52,8 +52,6 @@ bool check_timeout(std::chrono::steady_clock::time_point now, std::chrono::stead
 HaierClimateBase::HaierClimateBase()
     : haier_protocol_(*this),
       protocol_phase_(ProtocolPhases::SENDING_INIT_1),
-      display_status_(true),
-      health_mode_(false),
       force_send_control_(false),
       forced_request_status_(false),
       reset_protocol_request_(false),
@@ -127,21 +125,34 @@ haier_protocol::HaierMessage HaierClimateBase::get_wifi_signal_message_() {
 }
 #endif
 
-bool HaierClimateBase::get_display_state() const { return this->display_status_; }
+void HaierClimateBase::save_settings() {
+  HaierBaseSettings settings{this->get_health_mode(), this->get_display_state()};
+  if (!this->base_rtc_.save(&settings)) {
+    ESP_LOGW(TAG, "Failed to save settings");
+  }
+}
+
+bool HaierClimateBase::get_display_state() const {
+  return (this->display_status_ == SwitchState::ON) || (this->display_status_ == SwitchState::PENDING_ON);
+}
 
 void HaierClimateBase::set_display_state(bool state) {
-  if (this->display_status_ != state) {
-    this->display_status_ = state;
+  if (state != this->get_display_state()) {
+    this->display_status_ = state ? SwitchState::PENDING_ON : SwitchState::PENDING_OFF;
     this->force_send_control_ = true;
+    this->save_settings();
   }
 }
 
-bool HaierClimateBase::get_health_mode() const { return this->health_mode_; }
+bool HaierClimateBase::get_health_mode() const {
+  return (this->health_mode_ == SwitchState::ON) || (this->health_mode_ == SwitchState::PENDING_ON);
+}
 
 void HaierClimateBase::set_health_mode(bool state) {
-  if (this->health_mode_ != state) {
-    this->health_mode_ = state;
+  if (state != this->get_health_mode()) {
+    this->health_mode_ = state ? SwitchState::PENDING_ON : SwitchState::PENDING_OFF;
     this->force_send_control_ = true;
+    this->save_settings();
   }
 }
 
@@ -287,6 +298,14 @@ void HaierClimateBase::loop() {
   }
   this->process_phase(now);
   this->haier_protocol_.loop();
+#ifdef USE_SWITCH
+  if ((this->display_switch_ != nullptr) && (this->display_switch_->state != this->get_display_state())) {
+    this->display_switch_->publish_state(this->get_display_state());
+  }
+  if ((this->health_mode_switch_ != nullptr) && (this->health_mode_switch_->state != this->get_health_mode())) {
+    this->health_mode_switch_->publish_state(this->get_health_mode());
+  }
+#endif  // USE_SWITCH
 }
 
 void HaierClimateBase::process_protocol_reset() {
@@ -329,6 +348,26 @@ bool HaierClimateBase::prepare_pending_action() {
 
 ClimateTraits HaierClimateBase::traits() { return traits_; }
 
+void HaierClimateBase::initialization() {
+  constexpr uint32_t restore_settings_version = 0xA77D21EF;
+  this->base_rtc_ =
+      global_preferences->make_preference<HaierBaseSettings>(this->get_object_id_hash() ^ restore_settings_version);
+  HaierBaseSettings recovered;
+  if (!this->base_rtc_.load(&recovered)) {
+    recovered = {false, true};
+  }
+  this->display_status_ = recovered.display_state ? SwitchState::PENDING_ON : SwitchState::PENDING_OFF;
+  this->health_mode_ = recovered.health_mode ? SwitchState::PENDING_ON : SwitchState::PENDING_OFF;
+#ifdef USE_SWITCH
+  if (this->display_switch_ != nullptr) {
+    this->display_switch_->publish_state(this->get_display_state());
+  }
+  if (this->health_mode_switch_ != nullptr) {
+    this->health_mode_switch_->publish_state(this->get_health_mode());
+  }
+#endif
+}
+
 void HaierClimateBase::control(const ClimateCall &call) {
   ESP_LOGD("Control", "Control call");
   if (!this->valid_connection()) {
@@ -353,6 +392,22 @@ void HaierClimateBase::control(const ClimateCall &call) {
   }
 }
 
+#ifdef USE_SWITCH
+void HaierClimateBase::set_display_switch(switch_::Switch *sw) {
+  this->display_switch_ = sw;
+  if ((this->display_switch_ != nullptr) && (this->valid_connection())) {
+    this->display_switch_->publish_state(this->get_display_state());
+  }
+}
+
+void HaierClimateBase::set_health_mode_switch(switch_::Switch *sw) {
+  this->health_mode_switch_ = sw;
+  if ((this->health_mode_switch_ != nullptr) && (this->valid_connection())) {
+    this->health_mode_switch_->publish_state(this->get_health_mode());
+  }
+}
+#endif
+
 void HaierClimateBase::HvacSettings::reset() {
   this->valid = false;
   this->mode.reset();

esphome/components/haier/haier_base.h

@@ -8,6 +8,10 @@
 // HaierProtocol
 #include <protocol/haier_protocol.h>
 
+#ifdef USE_SWITCH
+#include "esphome/components/switch/switch.h"
+#endif
+
 namespace esphome {
 namespace haier {
 
@@ -20,10 +24,24 @@ enum class ActionRequest : uint8_t {
   START_STERI_CLEAN = 5,  // only hOn
 };
 
+struct HaierBaseSettings {
+  bool health_mode;
+  bool display_state;
+};
+
 class HaierClimateBase : public esphome::Component,
                          public esphome::climate::Climate,
                          public esphome::uart::UARTDevice,
                          public haier_protocol::ProtocolStream {
+#ifdef USE_SWITCH
+ public:
+  void set_display_switch(switch_::Switch *sw);
+  void set_health_mode_switch(switch_::Switch *sw);
+
+ protected:
+  switch_::Switch *display_switch_{nullptr};
+  switch_::Switch *health_mode_switch_{nullptr};
+#endif
  public:
   HaierClimateBase();
   HaierClimateBase(const HaierClimateBase &) = delete;
@@ -82,7 +100,8 @@ class HaierClimateBase : public esphome::Component,
   virtual void process_phase(std::chrono::steady_clock::time_point now) = 0;
   virtual haier_protocol::HaierMessage get_control_message() = 0;          // NOLINT(readability-identifier-naming)
   virtual haier_protocol::HaierMessage get_power_message(bool state) = 0;  // NOLINT(readability-identifier-naming)
-  virtual void initialization(){};
+  virtual void save_settings();
+  virtual void initialization();
   virtual bool prepare_pending_action();
   virtual void process_protocol_reset();
   esphome::climate::ClimateTraits traits() override;
@@ -127,13 +146,19 @@ class HaierClimateBase : public esphome::Component,
     ActionRequest action;
     esphome::optional<haier_protocol::HaierMessage> message;
   };
+  enum class SwitchState {
+    OFF = 0b00,
+    ON = 0b01,
+    PENDING_OFF = 0b10,
+    PENDING_ON = 0b11,
+  };
   haier_protocol::ProtocolHandler haier_protocol_;
   ProtocolPhases protocol_phase_;
   esphome::optional<PendingAction> action_request_;
   uint8_t fan_mode_speed_;
   uint8_t other_modes_fan_speed_;
-  bool display_status_;
-  bool health_mode_;
+  SwitchState display_status_{SwitchState::ON};
+  SwitchState health_mode_{SwitchState::OFF};
   bool force_send_control_;
   bool forced_request_status_;
   bool reset_protocol_request_;
@@ -148,6 +173,7 @@ class HaierClimateBase : public esphome::Component,
   std::chrono::steady_clock::time_point last_status_request_;          // To request AC status
   std::chrono::steady_clock::time_point last_signal_request_;          // To send WiFI signal level
   CallbackManager<void(const char *, size_t)> status_message_callback_{};
+  ESPPreferenceObject base_rtc_;
 };
 
 class StatusMessageTrigger : public Trigger<const char *, size_t> {

esphome/components/haier/hon_climate.cpp

@@ -31,9 +31,32 @@ HonClimate::HonClimate()
 
 HonClimate::~HonClimate() {}
 
-void HonClimate::set_beeper_state(bool state) { this->beeper_status_ = state; }
+void HonClimate::set_beeper_state(bool state) {
+  if (state != this->settings_.beeper_state) {
+    this->settings_.beeper_state = state;
+#ifdef USE_SWITCH
+    this->beeper_switch_->publish_state(state);
+#endif
+    this->hon_rtc_.save(&this->settings_);
+  }
+}
+
+bool HonClimate::get_beeper_state() const { return this->settings_.beeper_state; }
+
+void HonClimate::set_quiet_mode_state(bool state) {
+  if (state != this->get_quiet_mode_state()) {
+    this->quiet_mode_state_ = state ? SwitchState::PENDING_ON : SwitchState::PENDING_OFF;
+    this->settings_.quiet_mode_state = state;
+#ifdef USE_SWITCH
+    this->quiet_mode_switch_->publish_state(state);
+#endif
+    this->hon_rtc_.save(&this->settings_);
+  }
+}
 
-bool HonClimate::get_beeper_state() const { return this->beeper_status_; }
+bool HonClimate::get_quiet_mode_state() const {
+  return (this->quiet_mode_state_ == SwitchState::ON) || (this->quiet_mode_state_ == SwitchState::PENDING_ON);
+}
 
 esphome::optional<hon_protocol::VerticalSwingMode> HonClimate::get_vertical_airflow() const {
   return this->current_vertical_swing_;
@@ -474,16 +497,19 @@ haier_protocol::HaierMessage HonClimate::get_power_message(bool state) {
 }
 
 void HonClimate::initialization() {
-  constexpr uint32_t restore_settings_version = 0xE834D8DCUL;
-  this->rtc_ = global_preferences->make_preference<HonSettings>(this->get_object_id_hash() ^ restore_settings_version);
+  HaierClimateBase::initialization();
+  constexpr uint32_t restore_settings_version = 0x57EB59DDUL;
+  this->hon_rtc_ =
+      global_preferences->make_preference<HonSettings>(this->get_object_id_hash() ^ restore_settings_version);
   HonSettings recovered;
-  if (this->rtc_.load(&recovered)) {
+  if (this->hon_rtc_.load(&recovered)) {
     this->settings_ = recovered;
   } else {
-    this->settings_ = {hon_protocol::VerticalSwingMode::CENTER, hon_protocol::HorizontalSwingMode::CENTER};
+    this->settings_ = {hon_protocol::VerticalSwingMode::CENTER, hon_protocol::HorizontalSwingMode::CENTER, true, false};
   }
   this->current_vertical_swing_ = this->settings_.last_vertiacal_swing;
   this->current_horizontal_swing_ = this->settings_.last_horizontal_swing;
+  this->quiet_mode_state_ = this->settings_.quiet_mode_state ? SwitchState::PENDING_ON : SwitchState::PENDING_OFF;
 }
 
 haier_protocol::HaierMessage HonClimate::get_control_message() {
@@ -519,8 +545,7 @@ haier_protocol::HaierMessage HonClimate::get_control_message() {
           out_data->ac_power = 1;
           out_data->ac_mode = (uint8_t) hon_protocol::ConditioningMode::FAN;
           out_data->fan_mode = this->fan_mode_speed_;  // Auto doesn't work in fan only mode
-          // Disabling boost and eco mode for Fan only
-          out_data->quiet_mode = 0;
+          // Disabling boost for Fan only
           out_data->fast_mode = 0;
           break;
         case CLIMATE_MODE_COOL:
@@ -582,47 +607,34 @@ haier_protocol::HaierMessage HonClimate::get_control_message() {
     }
     if (out_data->ac_power == 0) {
       // If AC is off - no presets allowed
-      out_data->quiet_mode = 0;
       out_data->fast_mode = 0;
       out_data->sleep_mode = 0;
     } else if (climate_control.preset.has_value()) {
       switch (climate_control.preset.value()) {
         case CLIMATE_PRESET_NONE:
-          out_data->quiet_mode = 0;
-          out_data->fast_mode = 0;
-          out_data->sleep_mode = 0;
-          out_data->ten_degree = 0;
-          break;
-        case CLIMATE_PRESET_ECO:
-          // Eco is not supported in Fan only mode
-          out_data->quiet_mode = (this->mode != CLIMATE_MODE_FAN_ONLY) ? 1 : 0;
           out_data->fast_mode = 0;
           out_data->sleep_mode = 0;
           out_data->ten_degree = 0;
           break;
         case CLIMATE_PRESET_BOOST:
-          out_data->quiet_mode = 0;
           // Boost is not supported in Fan only mode
           out_data->fast_mode = (this->mode != CLIMATE_MODE_FAN_ONLY) ? 1 : 0;
           out_data->sleep_mode = 0;
           out_data->ten_degree = 0;
           break;
         case CLIMATE_PRESET_AWAY:
-          out_data->quiet_mode = 0;
           out_data->fast_mode = 0;
           out_data->sleep_mode = 0;
           // 10 degrees allowed only in heat mode
           out_data->ten_degree = (this->mode == CLIMATE_MODE_HEAT) ? 1 : 0;
           break;
         case CLIMATE_PRESET_SLEEP:
-          out_data->quiet_mode = 0;
           out_data->fast_mode = 0;
           out_data->sleep_mode = 1;
           out_data->ten_degree = 0;
           break;
         default:
           ESP_LOGE("Control", "Unsupported preset");
-          out_data->quiet_mode = 0;
           out_data->fast_mode = 0;
           out_data->sleep_mode = 0;
           out_data->ten_degree = 0;
@@ -638,10 +650,23 @@ haier_protocol::HaierMessage HonClimate::get_control_message() {
     out_data->horizontal_swing_mode = (uint8_t) this->pending_horizontal_direction_.value();
     this->pending_horizontal_direction_.reset();
   }
-  out_data->beeper_status = ((!this->beeper_status_) || (!has_hvac_settings)) ? 1 : 0;
+  {
+    // Quiet mode
+    if ((out_data->ac_power == 0) || (out_data->ac_mode == (uint8_t) hon_protocol::ConditioningMode::FAN)) {
+      // If AC is off or in fan only mode - no quiet mode allowed
+      out_data->quiet_mode = 0;
+    } else {
+      out_data->quiet_mode = this->get_quiet_mode_state() ? 1 : 0;
+    }
+    // Clean quiet mode state pending flag
+    this->quiet_mode_state_ = (SwitchState) ((uint8_t) this->quiet_mode_state_ & 0b01);
+  }
+  out_data->beeper_status = ((!this->get_beeper_state()) || (!has_hvac_settings)) ? 1 : 0;
   control_out_buffer[4] = 0;  // This byte should be cleared before setting values
-  out_data->display_status = this->display_status_ ? 1 : 0;
-  out_data->health_mode = this->health_mode_ ? 1 : 0;
+  out_data->display_status = this->get_display_state() ? 1 : 0;
+  this->display_status_ = (SwitchState) ((uint8_t) this->display_status_ & 0b01);
+  out_data->health_mode = this->get_health_mode() ? 1 : 0;
+  this->health_mode_ = (SwitchState) ((uint8_t) this->health_mode_ & 0b01);
   return haier_protocol::HaierMessage(haier_protocol::FrameType::CONTROL,
                                       (uint16_t) hon_protocol::SubcommandsControl::SET_GROUP_PARAMETERS,
                                       control_out_buffer, this->real_control_packet_size_);
@@ -765,6 +790,22 @@ void HonClimate::update_sub_text_sensor_(SubTextSensorType type, const std::stri
 }
 #endif  // USE_TEXT_SENSOR
 
+#ifdef USE_SWITCH
+void HonClimate::set_beeper_switch(switch_::Switch *sw) {
+  this->beeper_switch_ = sw;
+  if (this->beeper_switch_ != nullptr) {
+    this->beeper_switch_->publish_state(this->get_beeper_state());
+  }
+}
+
+void HonClimate::set_quiet_mode_switch(switch_::Switch *sw) {
+  this->quiet_mode_switch_ = sw;
+  if (this->quiet_mode_switch_ != nullptr) {
+    this->quiet_mode_switch_->publish_state(this->settings_.quiet_mode_state);
+  }
+}
+#endif  // USE_SWITCH
+
 haier_protocol::HandlerError HonClimate::process_status_message_(const uint8_t *packet_buffer, uint8_t size) {
   size_t expected_size =
       2 + this->status_message_header_size_ + this->real_control_packet_size_ + this->real_sensors_packet_size_;
@@ -827,9 +868,7 @@ haier_protocol::HandlerError HonClimate::process_status_message_(const uint8_t *
   {
     // Extra modes/presets
     optional<ClimatePreset> old_preset = this->preset;
-    if (packet.control.quiet_mode != 0) {
-      this->preset = CLIMATE_PRESET_ECO;
-    } else if (packet.control.fast_mode != 0) {
+    if (packet.control.fast_mode != 0) {
       this->preset = CLIMATE_PRESET_BOOST;
     } else if (packet.control.sleep_mode != 0) {
       this->preset = CLIMATE_PRESET_SLEEP;
@@ -883,28 +922,26 @@ haier_protocol::HandlerError HonClimate::process_status_message_(const uint8_t *
     }
     should_publish = should_publish || (!old_fan_mode.has_value()) || (old_fan_mode.value() != fan_mode.value());
   }
-  {
-    // Display status
-    // should be before "Climate mode" because it is changing this->mode
-    if (packet.control.ac_power != 0) {
-      // if AC is off display status always ON so process it only when AC is on
-      bool disp_status = packet.control.display_status != 0;
-      if (disp_status != this->display_status_) {
-        // Do something only if display status changed
-        if (this->mode == CLIMATE_MODE_OFF) {
-          // AC just turned on from remote need to turn off display
-          this->force_send_control_ = true;
-        } else {
-          this->display_status_ = disp_status;
-        }
+  // Display status
+  // should be before "Climate mode" because it is changing this->mode
+  if (packet.control.ac_power != 0) {
+    // if AC is off display status always ON so process it only when AC is on
+    bool disp_status = packet.control.display_status != 0;
+    if (disp_status != this->get_display_state()) {
+      // Do something only if display status changed
+      if (this->mode == CLIMATE_MODE_OFF) {
+        // AC just turned on from remote need to turn off display
+        this->force_send_control_ = true;
+      } else if ((((uint8_t) this->health_mode_) & 0b10) == 0) {
+        this->display_status_ = disp_status ? SwitchState::ON : SwitchState::OFF;
       }
     }
   }
-  {
-    // Health mode
-    bool old_health_mode = this->health_mode_;
-    this->health_mode_ = packet.control.health_mode == 1;
-    should_publish = should_publish || (old_health_mode != this->health_mode_);
+  // Health mode
+  if ((((uint8_t) this->health_mode_) & 0b10) == 0) {
+    bool old_health_mode = this->get_health_mode();
+    this->health_mode_ = packet.control.health_mode == 1 ? SwitchState::ON : SwitchState::OFF;
+    should_publish = should_publish || (old_health_mode != this->get_health_mode());
   }
   {
     CleaningState new_cleaning;
@@ -958,17 +995,36 @@ haier_protocol::HandlerError HonClimate::process_status_message_(const uint8_t *
     }
     should_publish = should_publish || (old_mode != this->mode);
   }
+  {
+    // Quiet mode, should be after climate mode
+    if ((this->mode != CLIMATE_MODE_FAN_ONLY) && (this->mode != CLIMATE_MODE_OFF) &&
+        ((((uint8_t) this->quiet_mode_state_) & 0b10) == 0)) {
+      // In proper mode and not in pending state
+      bool new_quiet_mode = packet.control.quiet_mode != 0;
+      if (new_quiet_mode != this->get_quiet_mode_state()) {
+        this->quiet_mode_state_ = new_quiet_mode ? SwitchState::ON : SwitchState::OFF;
+        this->settings_.quiet_mode_state = new_quiet_mode;
+        this->hon_rtc_.save(&this->settings_);
+      }
+    }
+  }
   {
     // Swing mode
     ClimateSwingMode old_swing_mode = this->swing_mode;
-    if (packet.control.horizontal_swing_mode == (uint8_t) hon_protocol::HorizontalSwingMode::AUTO) {
-      if (packet.control.vertical_swing_mode == (uint8_t) hon_protocol::VerticalSwingMode::AUTO) {
+    const std::set<ClimateSwingMode> &swing_modes = traits_.get_supported_swing_modes();
+    bool vertical_swing_supported = swing_modes.find(CLIMATE_SWING_VERTICAL) != swing_modes.end();
+    bool horizontal_swing_supported = swing_modes.find(CLIMATE_SWING_HORIZONTAL) != swing_modes.end();
+    if (horizontal_swing_supported &&
+        (packet.control.horizontal_swing_mode == (uint8_t) hon_protocol::HorizontalSwingMode::AUTO)) {
+      if (vertical_swing_supported &&
+          (packet.control.vertical_swing_mode == (uint8_t) hon_protocol::VerticalSwingMode::AUTO)) {
         this->swing_mode = CLIMATE_SWING_BOTH;
       } else {
         this->swing_mode = CLIMATE_SWING_HORIZONTAL;
       }
     } else {
-      if (packet.control.vertical_swing_mode == (uint8_t) hon_protocol::VerticalSwingMode::AUTO) {
+      if (vertical_swing_supported &&
+          (packet.control.vertical_swing_mode == (uint8_t) hon_protocol::VerticalSwingMode::AUTO)) {
         this->swing_mode = CLIMATE_SWING_VERTICAL;
       } else {
         this->swing_mode = CLIMATE_SWING_OFF;
@@ -985,7 +1041,7 @@ haier_protocol::HandlerError HonClimate::process_status_message_(const uint8_t *
     if (save_settings) {
       this->settings_.last_vertiacal_swing = this->current_vertical_swing_.value();
       this->settings_.last_horizontal_swing = this->current_horizontal_swing_.value();
-      this->rtc_.save(&this->settings_);
+      this->hon_rtc_.save(&this->settings_);
     }
     should_publish = should_publish || (old_swing_mode != this->swing_mode);
   }
@@ -1017,7 +1073,7 @@ void HonClimate::fill_control_messages_queue_() {
         haier_protocol::HaierMessage(haier_protocol::FrameType::CONTROL,
                                      (uint16_t) hon_protocol::SubcommandsControl::SET_SINGLE_PARAMETER +
                                          (uint8_t) hon_protocol::DataParameters::BEEPER_STATUS,
-                                     this->beeper_status_ ? ZERO_BUF : ONE_BUF, 2));
+                                     this->get_beeper_state() ? ZERO_BUF : ONE_BUF, 2));
   }
   // Health mode
   {
@@ -1025,13 +1081,16 @@ void HonClimate::fill_control_messages_queue_() {
         haier_protocol::HaierMessage(haier_protocol::FrameType::CONTROL,
                                      (uint16_t) hon_protocol::SubcommandsControl::SET_SINGLE_PARAMETER +
                                          (uint8_t) hon_protocol::DataParameters::HEALTH_MODE,
-                                     this->health_mode_ ? ONE_BUF : ZERO_BUF, 2));
+                                     this->get_health_mode() ? ONE_BUF : ZERO_BUF, 2));
+    this->health_mode_ = (SwitchState) ((uint8_t) this->health_mode_ & 0b01);
   }
   // Climate mode
+  ClimateMode climate_mode = this->mode;
   bool new_power = this->mode != CLIMATE_MODE_OFF;
   uint8_t fan_mode_buf[] = {0x00, 0xFF};
   uint8_t quiet_mode_buf[] = {0x00, 0xFF};
   if (climate_control.mode.has_value()) {
+    climate_mode = climate_control.mode.value();
     uint8_t buffer[2] = {0x00, 0x00};
     switch (climate_control.mode.value()) {
       case CLIMATE_MODE_OFF:
@@ -1076,8 +1135,6 @@ void HonClimate::fill_control_messages_queue_() {
                                              (uint8_t) hon_protocol::DataParameters::AC_MODE,
                                          buffer, 2));
         fan_mode_buf[1] = this->other_modes_fan_speed_;  // Auto doesn't work in fan only mode
-        // Disabling eco mode for Fan only
-        quiet_mode_buf[1] = 0;
         break;
       case CLIMATE_MODE_COOL:
         new_power = true;
@@ -1108,30 +1165,20 @@ void HonClimate::fill_control_messages_queue_() {
     uint8_t away_mode_buf[] = {0x00, 0xFF};
     if (!new_power) {
       // If AC is off - no presets allowed
-      quiet_mode_buf[1] = 0x00;
       fast_mode_buf[1] = 0x00;
       away_mode_buf[1] = 0x00;
     } else if (climate_control.preset.has_value()) {
       switch (climate_control.preset.value()) {
         case CLIMATE_PRESET_NONE:
-          quiet_mode_buf[1] = 0x00;
-          fast_mode_buf[1] = 0x00;
-          away_mode_buf[1] = 0x00;
-          break;
-        case CLIMATE_PRESET_ECO:
-          // Eco is not supported in Fan only mode
-          quiet_mode_buf[1] = (this->mode != CLIMATE_MODE_FAN_ONLY) ? 0x01 : 0x00;
           fast_mode_buf[1] = 0x00;
           away_mode_buf[1] = 0x00;
           break;
         case CLIMATE_PRESET_BOOST:
-          quiet_mode_buf[1] = 0x00;
           // Boost is not supported in Fan only mode
           fast_mode_buf[1] = (this->mode != CLIMATE_MODE_FAN_ONLY) ? 0x01 : 0x00;
           away_mode_buf[1] = 0x00;
           break;
         case CLIMATE_PRESET_AWAY:
-          quiet_mode_buf[1] = 0x00;
           fast_mode_buf[1] = 0x00;
           away_mode_buf[1] = (this->mode == CLIMATE_MODE_HEAT) ? 0x01 : 0x00;
           break;
@@ -1140,8 +1187,18 @@ void HonClimate::fill_control_messages_queue_() {
           break;
       }
     }
+    {
+      // Quiet mode
+      if (new_power && (climate_mode != CLIMATE_MODE_FAN_ONLY) && this->get_quiet_mode_state()) {
+        quiet_mode_buf[1] = 0x01;
+      } else {
+        quiet_mode_buf[1] = 0x00;
+      }
+      // Clean quiet mode state pending flag
+      this->quiet_mode_state_ = (SwitchState) ((uint8_t) this->quiet_mode_state_ & 0b01);
+    }
     auto presets = this->traits_.get_supported_presets();
-    if ((quiet_mode_buf[1] != 0xFF) && ((presets.find(climate::ClimatePreset::CLIMATE_PRESET_ECO) != presets.end()))) {
+    if (quiet_mode_buf[1] != 0xFF) {
       this->control_messages_queue_.push(
           haier_protocol::HaierMessage(haier_protocol::FrameType::CONTROL,
                                        (uint16_t) hon_protocol::SubcommandsControl::SET_SINGLE_PARAMETER +

esphome/components/haier/hon_climate.h

@@ -10,6 +10,9 @@
 #ifdef USE_TEXT_SENSOR
 #include "esphome/components/text_sensor/text_sensor.h"
 #endif
+#ifdef USE_SWITCH
+#include "esphome/components/switch/switch.h"
+#endif
 #include "esphome/core/automation.h"
 #include "haier_base.h"
 #include "hon_packet.h"
@@ -28,6 +31,8 @@ enum class HonControlMethod { MONITOR_ONLY = 0, SET_GROUP_PARAMETERS, SET_SINGLE
 struct HonSettings {
   hon_protocol::VerticalSwingMode last_vertiacal_swing;
   hon_protocol::HorizontalSwingMode last_horizontal_swing;
+  bool beeper_state;
+  bool quiet_mode_state;
 };
 
 class HonClimate : public HaierClimateBase {
@@ -86,6 +91,15 @@ class HonClimate : public HaierClimateBase {
  protected:
   void update_sub_text_sensor_(SubTextSensorType type, const std::string &value);
   text_sensor::TextSensor *sub_text_sensors_[(size_t) SubTextSensorType::SUB_TEXT_SENSOR_TYPE_COUNT]{nullptr};
+#endif
+#ifdef USE_SWITCH
+ public:
+  void set_beeper_switch(switch_::Switch *sw);
+  void set_quiet_mode_switch(switch_::Switch *sw);
+
+ protected:
+  switch_::Switch *beeper_switch_{nullptr};
+  switch_::Switch *quiet_mode_switch_{nullptr};
 #endif
  public:
   HonClimate();
@@ -95,6 +109,8 @@ class HonClimate : public HaierClimateBase {
   void dump_config() override;
   void set_beeper_state(bool state);
   bool get_beeper_state() const;
+  void set_quiet_mode_state(bool state);
+  bool get_quiet_mode_state() const;
   esphome::optional<hon_protocol::VerticalSwingMode> get_vertical_airflow() const;
   void set_vertical_airflow(hon_protocol::VerticalSwingMode direction);
   esphome::optional<hon_protocol::HorizontalSwingMode> get_horizontal_airflow() const;
@@ -153,7 +169,6 @@ class HonClimate : public HaierClimateBase {
     bool functions_[5];
   };
 
-  bool beeper_status_;
   CleaningState cleaning_status_;
   bool got_valid_outdoor_temp_;
   esphome::optional<hon_protocol::VerticalSwingMode> pending_vertical_direction_{};
@@ -175,7 +190,8 @@ class HonClimate : public HaierClimateBase {
   esphome::optional<hon_protocol::VerticalSwingMode> current_vertical_swing_{};
   esphome::optional<hon_protocol::HorizontalSwingMode> current_horizontal_swing_{};
   HonSettings settings_;
-  ESPPreferenceObject rtc_;
+  ESPPreferenceObject hon_rtc_;
+  SwitchState quiet_mode_state_{SwitchState::OFF};
 };
 
 class HaierAlarmStartTrigger : public Trigger<uint8_t, const char *> {

esphome/components/haier/smartair2_climate.cpp

@@ -376,8 +376,10 @@ haier_protocol::HaierMessage Smartair2Climate::get_control_message() {
       }
     }
   }
-  out_data->display_status = this->display_status_ ? 0 : 1;
-  out_data->health_mode = this->health_mode_ ? 1 : 0;
+  out_data->display_status = this->get_display_state() ? 0 : 1;
+  this->display_status_ = (SwitchState) ((uint8_t) this->display_status_ & 0b01);
+  out_data->health_mode = this->get_health_mode() ? 1 : 0;
+  this->health_mode_ = (SwitchState) ((uint8_t) this->health_mode_ & 0b01);
   return haier_protocol::HaierMessage(haier_protocol::FrameType::CONTROL, 0x4D5F, control_out_buffer,
                                       sizeof(smartair2_protocol::HaierPacketControl));
 }
@@ -446,28 +448,26 @@ haier_protocol::HandlerError Smartair2Climate::process_status_message_(const uin
     }
     should_publish = should_publish || (!old_fan_mode.has_value()) || (old_fan_mode.value() != fan_mode.value());
   }
-  {
-    // Display status
-    // should be before "Climate mode" because it is changing this->mode
-    if (packet.control.ac_power != 0) {
-      // if AC is off display status always ON so process it only when AC is on
-      bool disp_status = packet.control.display_status == 0;
-      if (disp_status != this->display_status_) {
-        // Do something only if display status changed
-        if (this->mode == CLIMATE_MODE_OFF) {
-          // AC just turned on from remote need to turn off display
-          this->force_send_control_ = true;
-        } else {
-          this->display_status_ = disp_status;
-        }
+  // Display status
+  // should be before "Climate mode" because it is changing this->mode
+  if (packet.control.ac_power != 0) {
+    // if AC is off display status always ON so process it only when AC is on
+    bool disp_status = packet.control.display_status == 0;
+    if (disp_status != this->get_display_state()) {
+      // Do something only if display status changed
+      if (this->mode == CLIMATE_MODE_OFF) {
+        // AC just turned on from remote need to turn off display
+        this->force_send_control_ = true;
+      } else if ((((uint8_t) this->health_mode_) & 0b10) == 0) {
+        this->display_status_ = disp_status ? SwitchState::ON : SwitchState::OFF;
       }
     }
   }
-  {
-    // Health mode
-    bool old_health_mode = this->health_mode_;
-    this->health_mode_ = packet.control.health_mode == 1;
-    should_publish = should_publish || (old_health_mode != this->health_mode_);
+  // Health mode
+  if ((((uint8_t) this->health_mode_) & 0b10) == 0) {
+    bool old_health_mode = this->get_health_mode();
+    this->health_mode_ = packet.control.health_mode == 1 ? SwitchState::ON : SwitchState::OFF;
+    should_publish = should_publish || (old_health_mode != this->get_health_mode());
   }
   {
     // Climate mode