esphome 2024.6.1__py3-none-any.whl → 2024.6.2__py3-none-any.whl

esphome/components/gpio/one_wire/gpio_one_wire.cpp

@@ -9,6 +9,10 @@ static const char *const TAG = "gpio.one_wire";
 
 void GPIOOneWireBus::setup() {
   ESP_LOGCONFIG(TAG, "Setting up 1-wire bus...");
+  this->t_pin_->setup();
+  // clear bus with 480µs high, otherwise initial reset in search might fail
+  this->t_pin_->pin_mode(gpio::FLAG_INPUT | gpio::FLAG_PULLUP);
+  delayMicroseconds(480);
   this->search();
 }
 
@@ -90,13 +94,15 @@ bool HOT IRAM_ATTR GPIOOneWireBus::read_bit_() {
 
   // measure from start value directly, to get best accurate timing no matter
   // how long pin_mode/delayMicroseconds took
-  delayMicroseconds(12 - (micros() - start));
+  uint32_t now = micros();
+  if (now - start < 12)
+    delayMicroseconds(12 - (now - start));
 
   // sample bus to read bit from peer
   bool r = pin_.digital_read();
 
   // read slot is at least 60µs; get as close to 60µs to spend less time with interrupts locked
-  uint32_t now = micros();
+  now = micros();
   if (now - start < 60)
     delayMicroseconds(60 - (now - start));
 

esphome/components/http_request/http_request.h

@@ -149,6 +149,7 @@ template<typename... Ts> class HttpRequestSendAction : public Action<Ts...> {
         }
         response_body.reserve(read_index);
         response_body.assign((char *) buf, read_index);
+        allocator.deallocate(buf, max_length);
       }
     }
 

esphome/components/http_request/http_request_idf.cpp

@@ -90,7 +90,7 @@ std::shared_ptr<HttpContainer> HttpRequestIDF::start(std::string url, std::strin
     int write_left = body_len;
     int write_index = 0;
     const char *buf = body.c_str();
-    while (body_len > 0) {
+    while (write_left > 0) {
       int written = esp_http_client_write(client, buf + write_index, write_left);
       if (written < 0) {
         err = ESP_FAIL;

esphome/components/http_request/watchdog.cpp

@@ -46,7 +46,7 @@ void WatchdogManager::set_timeout_(uint32_t timeout_ms) {
   };
   esp_task_wdt_reconfigure(&wdt_config);
 #else
-  esp_task_wdt_init(timeout_ms, true);
+  esp_task_wdt_init(timeout_ms / 1000, true);
 #endif  // ESP_IDF_VERSION_MAJOR
 #endif  // USE_ESP32
 

esphome/components/midea/climate.py

@@ -293,4 +293,4 @@ async def to_code(config):
     if CONF_HUMIDITY_SETPOINT in config:
         sens = await sensor.new_sensor(config[CONF_HUMIDITY_SETPOINT])
         cg.add(var.set_humidity_setpoint_sensor(sens))
-    cg.add_library("dudanov/MideaUART", "1.1.8")
+    cg.add_library("dudanov/MideaUART", "1.1.9")

esphome/components/update/__init__.py

@@ -4,11 +4,13 @@ import esphome.config_validation as cv
 import esphome.codegen as cg
 from esphome.const import (
     CONF_DEVICE_CLASS,
+    CONF_ENTITY_CATEGORY,
     CONF_ID,
     CONF_MQTT_ID,
     CONF_WEB_SERVER_ID,
     DEVICE_CLASS_EMPTY,
     DEVICE_CLASS_FIRMWARE,
+    ENTITY_CATEGORY_CONFIG,
 )
 from esphome.core import CORE, coroutine_with_priority
 from esphome.cpp_helpers import setup_entity
@@ -41,6 +43,9 @@ UPDATE_SCHEMA = (
             cv.Optional(CONF_ON_UPDATE_AVAILABLE): automation.validate_automation(
                 single=True
             ),
+            cv.Optional(
+                CONF_ENTITY_CATEGORY, default=ENTITY_CATEGORY_CONFIG
+            ): cv.entity_category,
         }
     )
 )
@@ -64,7 +69,7 @@ async def setup_update_core_(var, config):
         await mqtt.register_mqtt_component(mqtt_, config)
 
     if web_server_id_config := config.get(CONF_WEB_SERVER_ID):
-        web_server_ = cg.get_variable(web_server_id_config)
+        web_server_ = await cg.get_variable(web_server_id_config)
         web_server.add_entity_to_sorting_list(web_server_, var, config)
 
 

esphome/components/update/update_entity.cpp

@@ -1,9 +1,35 @@
 #include "update_entity.h"
 
+#include "esphome/core/log.h"
+
 namespace esphome {
 namespace update {
 
+static const char *const TAG = "update";
+
 void UpdateEntity::publish_state() {
+  ESP_LOGD(TAG, "'%s' - Publishing:", this->name_.c_str());
+  ESP_LOGD(TAG, "  Current Version: %s", this->update_info_.current_version.c_str());
+
+  if (!this->update_info_.md5.empty()) {
+    ESP_LOGD(TAG, "  Latest Version: %s", this->update_info_.latest_version.c_str());
+  }
+  if (!this->update_info_.firmware_url.empty()) {
+    ESP_LOGD(TAG, "  Firmware URL: %s", this->update_info_.firmware_url.c_str());
+  }
+
+  ESP_LOGD(TAG, "  Title: %s", this->update_info_.title.c_str());
+  if (!this->update_info_.summary.empty()) {
+    ESP_LOGD(TAG, "  Summary: %s", this->update_info_.summary.c_str());
+  }
+  if (!this->update_info_.release_url.empty()) {
+    ESP_LOGD(TAG, "  Release URL: %s", this->update_info_.release_url.c_str());
+  }
+
+  if (this->update_info_.has_progress) {
+    ESP_LOGD(TAG, "  Progress: %.0f%%", this->update_info_.progress);
+  }
+
   this->has_state_ = true;
   this->state_callback_.call();
 }

esphome/config_helpers.py

@@ -58,17 +58,21 @@ def merge_config(full_old, full_new):
             ids = {
                 v_id: i
                 for i, v in enumerate(res)
-                if (v_id := v.get(CONF_ID)) and isinstance(v_id, str)
+                if isinstance(v, dict)
+                and (v_id := v.get(CONF_ID))
+                and isinstance(v_id, str)
             }
             extend_ids = {
                 v_id.value: i
                 for i, v in enumerate(res)
-                if (v_id := v.get(CONF_ID)) and isinstance(v_id, Extend)
+                if isinstance(v, dict)
+                and (v_id := v.get(CONF_ID))
+                and isinstance(v_id, Extend)
             }
 
             ids_to_delete = []
             for v in new:
-                if new_id := v.get(CONF_ID):
+                if isinstance(v, dict) and (new_id := v.get(CONF_ID)):
                     if isinstance(new_id, Extend):
                         new_id = new_id.value
                         if new_id in ids:

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "2024.6.1"
+__version__ = "2024.6.2"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 VALID_SUBSTITUTIONS_CHARACTERS = (

{esphome-2024.6.1.dist-info → esphome-2024.6.2.dist-info}/METADATA

@@ -1,6 +1,6 @@
 Metadata-Version: 2.1
 Name: esphome
-Version: 2024.6.1
+Version: 2024.6.2
 Summary: Make creating custom firmwares for ESP32/ESP8266 super easy.
 Author-email: The ESPHome Authors <esphome@nabucasa.com>
 License: MIT

{esphome-2024.6.1.dist-info → esphome-2024.6.2.dist-info}/RECORD

@@ -3,9 +3,9 @@ esphome/__main__.py,sha256=q5bitlzrHuGTKl-wPanxoq2W-__D6v9FR7igo91fWj0,33402
 esphome/automation.py,sha256=wnD7iJvGPSz7q8AJo2o5KglnN_uuhKcWOpYp95Vg9Oc,14507
 esphome/codegen.py,sha256=A8O0Jr8qBILHlr7NwPPeW2DSKQ9H5d85j5fOXQw0rSQ,1835
 esphome/config.py,sha256=wztK2UmO7-hc6HFDAi6YWtrPVy5mH0diKuqpsWp4-XA,39616
-esphome/config_helpers.py,sha256=O7e8KvTpA3i5yjFORNhzPSsVSHDyKmF965b09MHyDWc,3118
+esphome/config_helpers.py,sha256=MKf_wzO35nn41FvigXE0iYKDslPgL2ruf8R-EPtTT2I,3256
 esphome/config_validation.py,sha256=G79LGVIh5BdpGkzuehkm7Db_llpbC2of4dKqZEpHc3A,64838
-esphome/const.py,sha256=xhJMd1J0q83zba92AuQKYK6YN8eDmfL0BlUc_5-QoaM,38841
+esphome/const.py,sha256=t7mcNQSRESKbGK0F1xgxTRv3S-TtQyyep8LhYzIfgQc,38841
 esphome/coroutine.py,sha256=IG2kC92OrenyiRm7Qo9uC-4qU4b4-Lmj0TkMIjRG2RY,9344
 esphome/cpp_generator.py,sha256=hW2EfubUiildhKXZIdV8Dr3Q9TM5oHybFwiTo5-vEUE,31203
 esphome/cpp_helpers.py,sha256=KadRBBoo4QRT-VwdWFtvxv_FYjqhZTkBhfMX-JhEMwg,4803
@@ -914,7 +914,7 @@ esphome/components/gpio/binary_sensor/__init__.py,sha256=5aN9d9lhMm5f4mYKTpCAjrE
 esphome/components/gpio/binary_sensor/gpio_binary_sensor.cpp,sha256=1uHK50delMhBeraotqFbVzOc7F-EDwL79aw283TmN0A,620
 esphome/components/gpio/binary_sensor/gpio_binary_sensor.h,sha256=KcIZ2dmzpUDfBMQOK7xjCqAYFK8iRP1cA4VyxZGxohE,666
 esphome/components/gpio/one_wire/__init__.py,sha256=oTQx3yIXYth-281Qz7NRFLCrX3S12LrmFbyOSC4XaeE,713
-esphome/components/gpio/one_wire/gpio_one_wire.cpp,sha256=h07lMveXaVVyC7HHi9XhadDFQa1-O8XdGcnq8gBkpGQ,5060
+esphome/components/gpio/one_wire/gpio_one_wire.cpp,sha256=0g9Jh5UcVxAnlCOraPfUr8FcITWUOMn-HrE24QqIdyo,5292
 esphome/components/gpio/one_wire/gpio_one_wire.h,sha256=tAxSKs75rR2SQImCLmzziXevxpy-bzamKt0ETTEW1dc,959
 esphome/components/gpio/output/__init__.py,sha256=LhpHRBnuIr_PzsFn8pzxXy_0ehXBWEptXffSanpPdDY,757
 esphome/components/gpio/output/gpio_binary_output.cpp,sha256=-_--D6rDu4n7G8uRDXCDqpZR4EzeuahfvR4HJeCvKaw,341
@@ -1067,12 +1067,12 @@ esphome/components/hte501/hte501.h,sha256=EY-aX8KwudhZPQ3tyRzSU2hPFUzFkmAhrGdhAX
 esphome/components/hte501/sensor.py,sha256=H7cfhfjQ0lyUgHABpoyiKOaj_f2qhN7nDW-tTj2sttQ,1723
 esphome/components/http_request/__init__.py,sha256=u9mjkozOhInNrvyIXxbhxdRqFLWqv2MG8ZIWylzH86g,9332
 esphome/components/http_request/http_request.cpp,sha256=UFpMPffAuE2enh8iBvZzV3EDr7lS-MoLaquDoi5FGEw,705
-esphome/components/http_request/http_request.h,sha256=CxfVuLWdEcBGI_1CizM-uLNd44Mk7CAFBAxLzuMqDxE,6262
+esphome/components/http_request/http_request.h,sha256=aiWpp-SlpjeGje1DEMPsYb6_pCvCVf1Dsr-33Vu4A7U,6309
 esphome/components/http_request/http_request_arduino.cpp,sha256=Bgobw_5kJ4WoimlmFS9msB6ftHoUhNYKf3Rj3xNY9fQ,5174
 esphome/components/http_request/http_request_arduino.h,sha256=iaOY5aKpQJREygOoyBB8Nsozp4cfETDt-G6Hgu_pkm0,871
-esphome/components/http_request/http_request_idf.cpp,sha256=24LMT47StCm6en0Jragk8DDFBc8quc9DVr2tsr0VVKQ,4380
+esphome/components/http_request/http_request_idf.cpp,sha256=7WJQ4woRdTGzeiaI9Aa2Xu0aDX5EAxydE0cbKbGLifE,4382
 esphome/components/http_request/http_request_idf.h,sha256=RmtzXsXsi8M66Lnf6eHbdEK5PIwALlvHyNXVz4skeGQ,774
-esphome/components/http_request/watchdog.cpp,sha256=Dr33YrlPl6I5XIFE2Fl0n2KzsppPTu7rbKaBHJyy7Hg,1680
+esphome/components/http_request/watchdog.cpp,sha256=vrRWycQv1a4iOxYaR2Ld4UJdnYgp-s2E1V6kLjqoK_w,1687
 esphome/components/http_request/watchdog.h,sha256=45UrEdgj6KmB7lLPIK4-_BdpwZy-aDki3tMWrQn-hF8,454
 esphome/components/http_request/ota/__init__.py,sha256=jpcMsy-w7q6YH2XFwBHVMb9_rM8hY0_3BS_3rkKRvc0,3202
 esphome/components/http_request/ota/automation.h,sha256=yQo6nJis0S56r5F-tIPbRPqPZMcu0Lpcawr2cX92Ap4,1209
@@ -1531,7 +1531,7 @@ esphome/components/midea/ac_automations.h,sha256=N7FlaSuUORyGymXLxZ1RuNt_Lf63I_4
 esphome/components/midea/air_conditioner.cpp,sha256=x4FnacE0KvJJwbN854g3tK-jZjZx6d7LwLppI0ugorg,6112
 esphome/components/midea/air_conditioner.h,sha256=3al4vlPYRHNo0876kyEdH0lRoMsUuptUnlUqqSjF84g,2494
 esphome/components/midea/appliance_base.h,sha256=U2b_MqV1Bv1rG3L7AnKggBvY3yYwtYa1ZuNtdoa1WaI,2951
-esphome/components/midea/climate.py,sha256=UYCeHg7ryEubF59UedERf4-K47LaNfV4-lhijeWdo9s,9682
+esphome/components/midea/climate.py,sha256=PE3cPEtgs0EoRxuCxPav_IuEj2eFOfnhIbLB8rVpOBg,9682
 esphome/components/midea/ir_transmitter.h,sha256=oLCcKvL8UeWJjCnrx66xIOYsXZ4kVKNLGl6zecZD3hM,1641
 esphome/components/midea_ac/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
 esphome/components/midea_ac/climate.py,sha256=rOrj73N5UfYLk1S5ngs4g2xizCm0l8xl_etVVXXtII4,120
@@ -2806,8 +2806,8 @@ esphome/components/ultrasonic/__init__.py,sha256=PTP_5q_K_2dNnUdkolkVd5komlEbJdS
 esphome/components/ultrasonic/sensor.py,sha256=SJADHJ0fdAUXD79cRiGGcsWbrt2tyHICYp3TIiRrqOs,1630
 esphome/components/ultrasonic/ultrasonic_sensor.cpp,sha256=b6rXmtLiXxWcD3O-Hu14rbOTImS6YMnpKU4gOXBhtMo,2359
 esphome/components/ultrasonic/ultrasonic_sensor.h,sha256=Xf0Fn8sVX-DdClbrL45Koo9OX5JMIwzpKkhOLLMVmlw,1389
-esphome/components/update/__init__.py,sha256=ZbU4ysm2ItCd4acYTozkWXkcB2ggOjRcVHwSbsy7iL4,3367
-esphome/components/update/update_entity.cpp,sha256=AyFcNZG1iGE6UzcANzaP-aOCLhKvK69_HRMSgiR9gSk,214
+esphome/components/update/__init__.py,sha256=I7QToO3YVq4A9KcESlJRP516F9k0OGtdjhogOJVS4L0,3556
+esphome/components/update/update_entity.cpp,sha256=gFN8TfpyHx3OL7RG0L1ZPdIQswhFc7_BzUY-uVlUlFc,1139
 esphome/components/update/update_entity.h,sha256=rPBBG3_bndHXtrW6zZwwinmeEo8LVdsqvplAD8MbQqM,1151
 esphome/components/uponor_smatrix/__init__.py,sha256=8GvLYw4MOoXfcys_6D_JRIyRY0fGmzDczSfKvuXipC8,2307
 esphome/components/uponor_smatrix/uponor_smatrix.cpp,sha256=7Vy0IFz7VREK5ekbAtj0vNc0usF6BDAvg37ZamxBTEE,7689
@@ -3113,9 +3113,9 @@ esphome/dashboard/util/itertools.py,sha256=8eLrWEWmICLtXNxkKdYPQV0c_N4GEz8m9Npnb
 esphome/dashboard/util/password.py,sha256=cQz3b9B-ijTe7zS6BeCW0hc3pWv6JjC78jmnycYYAh8,321
 esphome/dashboard/util/subprocess.py,sha256=T8EW6dbU4LPd2DG1dRrdh8li71tt6J1isn411poMhkk,1022
 esphome/dashboard/util/text.py,sha256=ENDnfN4O0NdA3CKVJjQYabFbwbrsIhVKrAMQe53qYu4,534
-esphome-2024.6.1.dist-info/LICENSE,sha256=HzEjkBInJe44L4WvAOPfhPJJDNj6YbnqFyvGWRzArGM,36664
-esphome-2024.6.1.dist-info/METADATA,sha256=dzznjmt_HecwKildcmA_qNS4rZW7fjOoHl4r0jegKu8,3263
-esphome-2024.6.1.dist-info/WHEEL,sha256=GJ7t_kWBFywbagK5eo9IoUwLW6oyOeTKmQ-9iHFVNxQ,92
-esphome-2024.6.1.dist-info/entry_points.txt,sha256=mIxVNuWtbYzeEcaWCl-AQ-97aBOWbnYBAK8nbF6P4M0,50
-esphome-2024.6.1.dist-info/top_level.txt,sha256=0GSXEW3cnITpgG3qnsSMz0qoqJHAFyfw7Y8MVtEf1Yk,8
-esphome-2024.6.1.dist-info/RECORD,,
+esphome-2024.6.2.dist-info/LICENSE,sha256=HzEjkBInJe44L4WvAOPfhPJJDNj6YbnqFyvGWRzArGM,36664
+esphome-2024.6.2.dist-info/METADATA,sha256=nBAQYftljTMkR8H7FHjhh3aZG7D7ESz62ffgoGnLQ3M,3263
+esphome-2024.6.2.dist-info/WHEEL,sha256=GJ7t_kWBFywbagK5eo9IoUwLW6oyOeTKmQ-9iHFVNxQ,92
+esphome-2024.6.2.dist-info/entry_points.txt,sha256=mIxVNuWtbYzeEcaWCl-AQ-97aBOWbnYBAK8nbF6P4M0,50
+esphome-2024.6.2.dist-info/top_level.txt,sha256=0GSXEW3cnITpgG3qnsSMz0qoqJHAFyfw7Y8MVtEf1Yk,8
+esphome-2024.6.2.dist-info/RECORD,,