esphome 2024.12.4__py3-none-any.whl → 2025.2.0b1__py3-none-any.whl

esphome/components/custom/output/__init__.py

@@ -1,61 +1,5 @@
-import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome.components import output
-from esphome.const import CONF_ID, CONF_LAMBDA, CONF_OUTPUTS, CONF_TYPE, CONF_BINARY
-from .. import custom_ns
 
-CustomBinaryOutputConstructor = custom_ns.class_("CustomBinaryOutputConstructor")
-CustomFloatOutputConstructor = custom_ns.class_("CustomFloatOutputConstructor")
-
-CONF_FLOAT = "float"
-
-CONFIG_SCHEMA = cv.typed_schema(
-    {
-        CONF_BINARY: cv.Schema(
-            {
-                cv.GenerateID(): cv.declare_id(CustomBinaryOutputConstructor),
-                cv.Required(CONF_LAMBDA): cv.returning_lambda,
-                cv.Required(CONF_OUTPUTS): cv.ensure_list(
-                    output.BINARY_OUTPUT_SCHEMA.extend(
-                        {
-                            cv.GenerateID(): cv.declare_id(output.BinaryOutput),
-                        }
-                    )
-                ),
-            }
-        ),
-        CONF_FLOAT: cv.Schema(
-            {
-                cv.GenerateID(): cv.declare_id(CustomFloatOutputConstructor),
-                cv.Required(CONF_LAMBDA): cv.returning_lambda,
-                cv.Required(CONF_OUTPUTS): cv.ensure_list(
-                    output.FLOAT_OUTPUT_SCHEMA.extend(
-                        {
-                            cv.GenerateID(): cv.declare_id(output.FloatOutput),
-                        }
-                    )
-                ),
-            }
-        ),
-    },
-    lower=True,
+CONFIG_SCHEMA = cv.invalid(
+    'The "custom" component has been removed. Consider conversion to an external component.\nhttps://esphome.io/guides/contributing#a-note-about-custom-components'
 )
-
-
-async def to_code(config):
-    type = config[CONF_TYPE]
-    if type == "binary":
-        ret_type = output.BinaryOutputPtr
-        klass = CustomBinaryOutputConstructor
-    else:
-        ret_type = output.FloatOutputPtr
-        klass = CustomFloatOutputConstructor
-    template_ = await cg.process_lambda(
-        config[CONF_LAMBDA], [], return_type=cg.std_vector.template(ret_type)
-    )
-
-    rhs = klass(template_)
-    custom = cg.variable(config[CONF_ID], rhs)
-    for i, conf in enumerate(config[CONF_OUTPUTS]):
-        out = cg.Pvariable(conf[CONF_ID], custom.get_output(i))
-        await output.register_output(out, conf)

esphome/components/custom/sensor/__init__.py

@@ -1,27 +1,5 @@
-import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome.components import sensor
-from esphome.const import CONF_ID, CONF_LAMBDA, CONF_SENSORS
-from .. import custom_ns
 
-CustomSensorConstructor = custom_ns.class_("CustomSensorConstructor")
-
-CONFIG_SCHEMA = cv.Schema(
-    {
-        cv.GenerateID(): cv.declare_id(CustomSensorConstructor),
-        cv.Required(CONF_LAMBDA): cv.returning_lambda,
-        cv.Required(CONF_SENSORS): cv.ensure_list(sensor.sensor_schema()),
-    }
+CONFIG_SCHEMA = cv.invalid(
+    'The "custom" component has been removed. Consider conversion to an external component.\nhttps://esphome.io/guides/contributing#a-note-about-custom-components'
 )
-
-
-async def to_code(config):
-    template_ = await cg.process_lambda(
-        config[CONF_LAMBDA], [], return_type=cg.std_vector.template(sensor.SensorPtr)
-    )
-
-    rhs = CustomSensorConstructor(template_)
-    var = cg.variable(config[CONF_ID], rhs)
-    for i, conf in enumerate(config[CONF_SENSORS]):
-        sens = cg.Pvariable(conf[CONF_ID], var.get_sensor(i))
-        await sensor.register_sensor(sens, conf)

esphome/components/custom/switch/__init__.py

@@ -1,27 +1,5 @@
-import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome.components import switch
-from esphome.const import CONF_ID, CONF_LAMBDA, CONF_SWITCHES
-from .. import custom_ns
 
-CustomSwitchConstructor = custom_ns.class_("CustomSwitchConstructor")
-
-CONFIG_SCHEMA = cv.Schema(
-    {
-        cv.GenerateID(): cv.declare_id(CustomSwitchConstructor),
-        cv.Required(CONF_LAMBDA): cv.returning_lambda,
-        cv.Required(CONF_SWITCHES): cv.ensure_list(switch.switch_schema(switch.Switch)),
-    }
+CONFIG_SCHEMA = cv.invalid(
+    'The "custom" component has been removed. Consider conversion to an external component.\nhttps://esphome.io/guides/contributing#a-note-about-custom-components'
 )
-
-
-async def to_code(config):
-    template_ = await cg.process_lambda(
-        config[CONF_LAMBDA], [], return_type=cg.std_vector.template(switch.SwitchPtr)
-    )
-
-    rhs = CustomSwitchConstructor(template_)
-    var = cg.variable(config[CONF_ID], rhs)
-    for i, conf in enumerate(config[CONF_SWITCHES]):
-        switch_ = cg.Pvariable(conf[CONF_ID], var.get_switch(i))
-        await switch.register_switch(switch_, conf)

esphome/components/custom/text_sensor/__init__.py

@@ -1,32 +1,5 @@
-import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome.components import text_sensor
-from esphome.const import CONF_ID, CONF_LAMBDA, CONF_TEXT_SENSORS
-from .. import custom_ns
 
-CustomTextSensorConstructor = custom_ns.class_("CustomTextSensorConstructor")
-
-CONFIG_SCHEMA = cv.Schema(
-    {
-        cv.GenerateID(): cv.declare_id(CustomTextSensorConstructor),
-        cv.Required(CONF_LAMBDA): cv.returning_lambda,
-        cv.Required(CONF_TEXT_SENSORS): cv.ensure_list(
-            text_sensor.text_sensor_schema()
-        ),
-    }
+CONFIG_SCHEMA = cv.invalid(
+    'The "custom" component has been removed. Consider conversion to an external component.\nhttps://esphome.io/guides/contributing#a-note-about-custom-components'
 )
-
-
-async def to_code(config):
-    template_ = await cg.process_lambda(
-        config[CONF_LAMBDA],
-        [],
-        return_type=cg.std_vector.template(text_sensor.TextSensorPtr),
-    )
-
-    rhs = CustomTextSensorConstructor(template_)
-    var = cg.variable(config[CONF_ID], rhs)
-
-    for i, conf in enumerate(config[CONF_TEXT_SENSORS]):
-        text = cg.Pvariable(conf[CONF_ID], var.get_text_sensor(i))
-        await text_sensor.register_text_sensor(text, conf)

esphome/components/custom_component/__init__.py

@@ -1,31 +1,7 @@
-import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome.const import CONF_COMPONENTS, CONF_ID, CONF_LAMBDA
-
-custom_component_ns = cg.esphome_ns.namespace("custom_component")
-CustomComponentConstructor = custom_component_ns.class_("CustomComponentConstructor")
 
 MULTI_CONF = True
-CONFIG_SCHEMA = cv.Schema(
-    {
-        cv.GenerateID(): cv.declare_id(CustomComponentConstructor),
-        cv.Required(CONF_LAMBDA): cv.returning_lambda,
-        cv.Optional(CONF_COMPONENTS): cv.ensure_list(
-            cv.Schema({cv.GenerateID(): cv.declare_id(cg.Component)}).extend(
-                cv.COMPONENT_SCHEMA
-            )
-        ),
-    }
-)
-
 
-async def to_code(config):
-    template_ = await cg.process_lambda(
-        config[CONF_LAMBDA], [], return_type=cg.std_vector.template(cg.ComponentPtr)
-    )
-
-    rhs = CustomComponentConstructor(template_)
-    var = cg.variable(config[CONF_ID], rhs)
-    for i, conf in enumerate(config.get(CONF_COMPONENTS, [])):
-        comp = cg.Pvariable(conf[CONF_ID], var.get_component(i))
-        await cg.register_component(comp, conf)
+CONFIG_SCHEMA = cv.invalid(
+    'The "custom" component has been removed. Consider conversion to an external component.\nhttps://esphome.io/guides/contributing#a-note-about-custom-components'
+)

esphome/components/daly_bms/daly_bms.cpp

@@ -298,6 +298,12 @@ void DalyBmsComponent::decode_data_(std::vector<uint8_t> data) {
                 if (this->cell_16_voltage_sensor_) {
                   this->cell_16_voltage_sensor_->publish_state((float) encode_uint16(it[5], it[6]) / 1000);
                 }
+                if (this->cell_17_voltage_sensor_) {
+                  this->cell_17_voltage_sensor_->publish_state((float) encode_uint16(it[7], it[8]) / 1000);
+                }
+                if (this->cell_18_voltage_sensor_) {
+                  this->cell_18_voltage_sensor_->publish_state((float) encode_uint16(it[9], it[10]) / 1000);
+                }
                 break;
             }
             break;

esphome/components/daly_bms/daly_bms.h

@@ -54,6 +54,8 @@ class DalyBmsComponent : public PollingComponent, public uart::UARTDevice {
   SUB_SENSOR(cell_14_voltage)
   SUB_SENSOR(cell_15_voltage)
   SUB_SENSOR(cell_16_voltage)
+  SUB_SENSOR(cell_17_voltage)
+  SUB_SENSOR(cell_18_voltage)
 #endif
 
 #ifdef USE_TEXT_SENSOR

esphome/components/daly_bms/sensor.py

@@ -52,6 +52,8 @@ CONF_CELL_13_VOLTAGE = "cell_13_voltage"
 CONF_CELL_14_VOLTAGE = "cell_14_voltage"
 CONF_CELL_15_VOLTAGE = "cell_15_voltage"
 CONF_CELL_16_VOLTAGE = "cell_16_voltage"
+CONF_CELL_17_VOLTAGE = "cell_17_voltage"
+CONF_CELL_18_VOLTAGE = "cell_18_voltage"
 ICON_CURRENT_DC = "mdi:current-dc"
 ICON_BATTERY_OUTLINE = "mdi:battery-outline"
 ICON_THERMOMETER_CHEVRON_UP = "mdi:thermometer-chevron-up"
@@ -92,6 +94,8 @@ TYPES = [
     CONF_CELL_14_VOLTAGE,
     CONF_CELL_15_VOLTAGE,
     CONF_CELL_16_VOLTAGE,
+    CONF_CELL_17_VOLTAGE,
+    CONF_CELL_18_VOLTAGE,
 ]
 
 CELL_VOLTAGE_SCHEMA = sensor.sensor_schema(
@@ -212,6 +216,8 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_CELL_14_VOLTAGE): CELL_VOLTAGE_SCHEMA,
             cv.Optional(CONF_CELL_15_VOLTAGE): CELL_VOLTAGE_SCHEMA,
             cv.Optional(CONF_CELL_16_VOLTAGE): CELL_VOLTAGE_SCHEMA,
+            cv.Optional(CONF_CELL_17_VOLTAGE): CELL_VOLTAGE_SCHEMA,
+            cv.Optional(CONF_CELL_18_VOLTAGE): CELL_VOLTAGE_SCHEMA,
         }
     ).extend(cv.COMPONENT_SCHEMA)
 )

esphome/components/debug/debug_component.cpp

@@ -50,6 +50,10 @@ void DebugComponent::dump_config() {
     this->reset_reason_->publish_state(get_reset_reason_());
   }
 #endif  // USE_TEXT_SENSOR
+
+#ifdef USE_ESP32
+  this->log_partition_info_();  // Log partition information for ESP32
+#endif                          // USE_ESP32
 }
 
 void DebugComponent::loop() {

esphome/components/debug/debug_component.h

@@ -55,6 +55,20 @@ class DebugComponent : public PollingComponent {
 #endif  // USE_ESP32
 #endif  // USE_SENSOR
 
+#ifdef USE_ESP32
+  /**
+   * @brief Logs information about the device's partition table.
+   *
+   * This function iterates through the ESP32's partition table and logs details
+   * about each partition, including its name, type, subtype, starting address,
+   * and size. The information is useful for diagnosing issues related to flash
+   * memory or verifying the partition configuration dynamically at runtime.
+   *
+   * Only available when compiled for ESP32 platforms.
+   */
+  void log_partition_info_();
+#endif  // USE_ESP32
+
 #ifdef USE_TEXT_SENSOR
   text_sensor::TextSensor *device_info_{nullptr};
   text_sensor::TextSensor *reset_reason_{nullptr};

esphome/components/debug/debug_esp32.cpp

@@ -5,6 +5,7 @@
 #include <esp_heap_caps.h>
 #include <esp_system.h>
 #include <esp_chip_info.h>
+#include <esp_partition.h>
 
 #if defined(USE_ESP32_VARIANT_ESP32)
 #include <esp32/rom/rtc.h>
@@ -28,111 +29,177 @@ namespace debug {
 
 static const char *const TAG = "debug";
 
+void DebugComponent::log_partition_info_() {
+  ESP_LOGCONFIG(TAG, "Partition table:");
+  ESP_LOGCONFIG(TAG, "  %-12s %-4s %-8s %-10s %-10s", "Name", "Type", "Subtype", "Address", "Size");
+  esp_partition_iterator_t it = esp_partition_find(ESP_PARTITION_TYPE_ANY, ESP_PARTITION_SUBTYPE_ANY, NULL);
+  while (it != NULL) {
+    const esp_partition_t *partition = esp_partition_get(it);
+    ESP_LOGCONFIG(TAG, "  %-12s %-4d %-8d 0x%08" PRIX32 " 0x%08" PRIX32, partition->label, partition->type,
+                  partition->subtype, partition->address, partition->size);
+    it = esp_partition_next(it);
+  }
+  esp_partition_iterator_release(it);
+}
+
 std::string DebugComponent::get_reset_reason_() {
   std::string reset_reason;
-  switch (rtc_get_reset_reason(0)) {
-    case POWERON_RESET:
-      reset_reason = "Power On Reset";
+  switch (esp_reset_reason()) {
+    case ESP_RST_POWERON:
+      reset_reason = "Reset due to power-on event";
+      break;
+    case ESP_RST_EXT:
+      reset_reason = "Reset by external pin";
+      break;
+    case ESP_RST_SW:
+      reset_reason = "Software reset via esp_restart";
+      break;
+    case ESP_RST_PANIC:
+      reset_reason = "Software reset due to exception/panic";
+      break;
+    case ESP_RST_INT_WDT:
+      reset_reason = "Reset (software or hardware) due to interrupt watchdog";
+      break;
+    case ESP_RST_TASK_WDT:
+      reset_reason = "Reset due to task watchdog";
+      break;
+    case ESP_RST_WDT:
+      reset_reason = "Reset due to other watchdogs";
+      break;
+    case ESP_RST_DEEPSLEEP:
+      reset_reason = "Reset after exiting deep sleep mode";
+      break;
+    case ESP_RST_BROWNOUT:
+      reset_reason = "Brownout reset (software or hardware)";
+      break;
+    case ESP_RST_SDIO:
+      reset_reason = "Reset over SDIO";
       break;
+#ifdef USE_ESP32_VARIANT_ESP32
+#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 1, 4))
+    case ESP_RST_USB:
+      reset_reason = "Reset by USB peripheral";
+      break;
+    case ESP_RST_JTAG:
+      reset_reason = "Reset by JTAG";
+      break;
+    case ESP_RST_EFUSE:
+      reset_reason = "Reset due to efuse error";
+      break;
+    case ESP_RST_PWR_GLITCH:
+      reset_reason = "Reset due to power glitch detected";
+      break;
+    case ESP_RST_CPU_LOCKUP:
+      reset_reason = "Reset due to CPU lock up (double exception)";
+      break;
+#endif        // ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 1, 4)
+#endif        // USE_ESP32_VARIANT_ESP32
+    default:  // Includes ESP_RST_UNKNOWN
+      switch (rtc_get_reset_reason(0)) {
+        case POWERON_RESET:
+          reset_reason = "Power On Reset";
+          break;
 #if defined(USE_ESP32_VARIANT_ESP32)
-    case SW_RESET:
+        case SW_RESET:
 #elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || \
     defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32C6)
-    case RTC_SW_SYS_RESET:
+        case RTC_SW_SYS_RESET:
 #endif
-      reset_reason = "Software Reset Digital Core";
-      break;
+          reset_reason = "Software Reset Digital Core";
+          break;
 #if defined(USE_ESP32_VARIANT_ESP32)
-    case OWDT_RESET:
-      reset_reason = "Watch Dog Reset Digital Core";
-      break;
+        case OWDT_RESET:
+          reset_reason = "Watch Dog Reset Digital Core";
+          break;
 #endif
-    case DEEPSLEEP_RESET:
-      reset_reason = "Deep Sleep Reset Digital Core";
-      break;
+        case DEEPSLEEP_RESET:
+          reset_reason = "Deep Sleep Reset Digital Core";
+          break;
 #if defined(USE_ESP32_VARIANT_ESP32)
-    case SDIO_RESET:
-      reset_reason = "SLC Module Reset Digital Core";
-      break;
+        case SDIO_RESET:
+          reset_reason = "SLC Module Reset Digital Core";
+          break;
 #endif
-    case TG0WDT_SYS_RESET:
-      reset_reason = "Timer Group 0 Watch Dog Reset Digital Core";
-      break;
-    case TG1WDT_SYS_RESET:
-      reset_reason = "Timer Group 1 Watch Dog Reset Digital Core";
-      break;
-    case RTCWDT_SYS_RESET:
-      reset_reason = "RTC Watch Dog Reset Digital Core";
-      break;
+        case TG0WDT_SYS_RESET:
+          reset_reason = "Timer Group 0 Watch Dog Reset Digital Core";
+          break;
+        case TG1WDT_SYS_RESET:
+          reset_reason = "Timer Group 1 Watch Dog Reset Digital Core";
+          break;
+        case RTCWDT_SYS_RESET:
+          reset_reason = "RTC Watch Dog Reset Digital Core";
+          break;
 #if !defined(USE_ESP32_VARIANT_ESP32C6) && !defined(USE_ESP32_VARIANT_ESP32H2)
-    case INTRUSION_RESET:
-      reset_reason = "Intrusion Reset CPU";
-      break;
+        case INTRUSION_RESET:
+          reset_reason = "Intrusion Reset CPU";
+          break;
 #endif
 #if defined(USE_ESP32_VARIANT_ESP32)
-    case TGWDT_CPU_RESET:
-      reset_reason = "Timer Group Reset CPU";
-      break;
+        case TGWDT_CPU_RESET:
+          reset_reason = "Timer Group Reset CPU";
+          break;
 #elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || \
     defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32C6)
-    case TG0WDT_CPU_RESET:
-      reset_reason = "Timer Group 0 Reset CPU";
-      break;
+        case TG0WDT_CPU_RESET:
+          reset_reason = "Timer Group 0 Reset CPU";
+          break;
 #endif
 #if defined(USE_ESP32_VARIANT_ESP32)
-    case SW_CPU_RESET:
+        case SW_CPU_RESET:
 #elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || \
     defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32C6)
-    case RTC_SW_CPU_RESET:
+        case RTC_SW_CPU_RESET:
 #endif
-      reset_reason = "Software Reset CPU";
-      break;
-    case RTCWDT_CPU_RESET:
-      reset_reason = "RTC Watch Dog Reset CPU";
-      break;
+          reset_reason = "Software Reset CPU";
+          break;
+        case RTCWDT_CPU_RESET:
+          reset_reason = "RTC Watch Dog Reset CPU";
+          break;
 #if defined(USE_ESP32_VARIANT_ESP32)
-    case EXT_CPU_RESET:
-      reset_reason = "External CPU Reset";
-      break;
+        case EXT_CPU_RESET:
+          reset_reason = "External CPU Reset";
+          break;
 #endif
-    case RTCWDT_BROWN_OUT_RESET:
-      reset_reason = "Voltage Unstable Reset";
-      break;
-    case RTCWDT_RTC_RESET:
-      reset_reason = "RTC Watch Dog Reset Digital Core And RTC Module";
-      break;
+        case RTCWDT_BROWN_OUT_RESET:
+          reset_reason = "Voltage Unstable Reset";
+          break;
+        case RTCWDT_RTC_RESET:
+          reset_reason = "RTC Watch Dog Reset Digital Core And RTC Module";
+          break;
 #if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3) || \
     defined(USE_ESP32_VARIANT_ESP32C6)
-    case TG1WDT_CPU_RESET:
-      reset_reason = "Timer Group 1 Reset CPU";
-      break;
-    case SUPER_WDT_RESET:
-      reset_reason = "Super Watchdog Reset Digital Core And RTC Module";
-      break;
-    case EFUSE_RESET:
-      reset_reason = "eFuse Reset Digital Core";
-      break;
+        case TG1WDT_CPU_RESET:
+          reset_reason = "Timer Group 1 Reset CPU";
+          break;
+        case SUPER_WDT_RESET:
+          reset_reason = "Super Watchdog Reset Digital Core And RTC Module";
+          break;
+        case EFUSE_RESET:
+          reset_reason = "eFuse Reset Digital Core";
+          break;
 #endif
 #if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
-    case GLITCH_RTC_RESET:
-      reset_reason = "Glitch Reset Digital Core And RTC Module";
-      break;
+        case GLITCH_RTC_RESET:
+          reset_reason = "Glitch Reset Digital Core And RTC Module";
+          break;
 #endif
 #if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32C6)
-    case USB_UART_CHIP_RESET:
-      reset_reason = "USB UART Reset Digital Core";
-      break;
-    case USB_JTAG_CHIP_RESET:
-      reset_reason = "USB JTAG Reset Digital Core";
-      break;
+        case USB_UART_CHIP_RESET:
+          reset_reason = "USB UART Reset Digital Core";
+          break;
+        case USB_JTAG_CHIP_RESET:
+          reset_reason = "USB JTAG Reset Digital Core";
+          break;
 #endif
 #if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S3)
-    case POWER_GLITCH_RESET:
-      reset_reason = "Power Glitch Reset Digital Core And RTC Module";
-      break;
+        case POWER_GLITCH_RESET:
+          reset_reason = "Power Glitch Reset Digital Core And RTC Module";
+          break;
 #endif
-    default:
-      reset_reason = "Unknown Reset Reason";
+        default:
+          reset_reason = "Unknown Reset Reason";
+      }
+      break;
   }
   ESP_LOGD(TAG, "Reset Reason: %s", reset_reason.c_str());
   return reset_reason;
@@ -223,6 +290,19 @@ void DebugComponent::get_device_info_(std::string &device_info) {
   device_info += " Cores:" + to_string(info.cores);
   device_info += " Revision:" + to_string(info.revision);
 
+  // Framework detection
+  device_info += "|Framework: ";
+#ifdef USE_ARDUINO
+  ESP_LOGD(TAG, "Framework: Arduino");
+  device_info += "Arduino";
+#elif defined(USE_ESP_IDF)
+  ESP_LOGD(TAG, "Framework: ESP-IDF");
+  device_info += "ESP-IDF";
+#else
+  ESP_LOGW(TAG, "Framework: UNKNOWN");
+  device_info += "UNKNOWN";
+#endif
+
   ESP_LOGD(TAG, "ESP-IDF Version: %s", esp_get_idf_version());
   device_info += "|ESP-IDF: ";
   device_info += esp_get_idf_version();
@@ -294,4 +374,4 @@ void DebugComponent::update_platform_() {
 
 }  // namespace debug
 }  // namespace esphome
-#endif
+#endif  // USE_ESP32

esphome/components/dfplayer/dfplayer.cpp

@@ -159,6 +159,15 @@ void DFPlayer::loop() {
         }
         break;
       case 9:  // End byte
+#ifdef ESPHOME_LOG_HAS_VERY_VERBOSE
+        char byte_sequence[100];
+        byte_sequence[0] = '\0';
+        for (size_t i = 0; i < this->read_pos_ + 1; ++i) {
+          snprintf(byte_sequence + strlen(byte_sequence), sizeof(byte_sequence) - strlen(byte_sequence), "%02X ",
+                   this->read_buffer_[i]);
+        }
+        ESP_LOGVV(TAG, "Received byte sequence: %s", byte_sequence);
+#endif
         if (byte != 0xEF) {
           ESP_LOGW(TAG, "Expected end byte 0xEF, got %#02x", byte);
           this->read_pos_ = 0;
@@ -238,13 +247,17 @@ void DFPlayer::loop() {
             this->ack_set_is_playing_ = false;
             this->ack_reset_is_playing_ = false;
             break;
+          case 0x3C:
+            ESP_LOGV(TAG, "Playback finished (USB drive)");
+            this->is_playing_ = false;
+            this->on_finished_playback_callback_.call();
           case 0x3D:
-            ESP_LOGV(TAG, "Playback finished");
+            ESP_LOGV(TAG, "Playback finished (SD card)");
             this->is_playing_ = false;
             this->on_finished_playback_callback_.call();
             break;
           default:
-            ESP_LOGV(TAG, "Received unknown cmd %#02x arg %#04x", cmd, argument);
+            ESP_LOGE(TAG, "Received unknown cmd %#02x arg %#04x", cmd, argument);
         }
         this->sent_cmd_ = 0;
         this->read_pos_ = 0;

esphome/components/dfrobot_sen0395/dfrobot_sen0395.cpp

@@ -118,8 +118,9 @@ std::unique_ptr<Command> CircularCommandQueue::dequeue() {
   if (front_ == rear_) {
     front_ = -1;
     rear_ = -1;
-  } else
+  } else {
     front_ = (front_ + 1) % COMMAND_QUEUE_SIZE;
+  }
 
   return dequeued_cmd;
 }

esphome/components/dht/dht.cpp

@@ -157,8 +157,9 @@ bool HOT IRAM_ATTR DHT::read_sensor_(float *temperature, float *humidity, bool r
       if (bit == 0) {
         bit = 7;
         byte++;
-      } else
+      } else {
         bit--;
+      }
     }
   }
   if (!report_errors && error_code != 0)