esphome 2024.11.0b1__py3-none-any.whl → 2024.11.0b2__py3-none-any.whl

esphome/components/bme68x_bsec2/bme68x_bsec2.cpp

@@ -204,11 +204,11 @@ void BME68xBSEC2Component::update_subscription_() {
 }
 
 void BME68xBSEC2Component::run_() {
+  this->op_mode_ = this->bsec_settings_.op_mode;
   int64_t curr_time_ns = this->get_time_ns_();
-  if (curr_time_ns < this->next_call_ns_) {
+  if (curr_time_ns < this->bsec_settings_.next_call) {
     return;
   }
-  this->op_mode_ = this->bsec_settings_.op_mode;
   uint8_t status;
 
   ESP_LOGV(TAG, "Performing sensor run");
@@ -219,57 +219,60 @@ void BME68xBSEC2Component::run_() {
     ESP_LOGW(TAG, "Failed to fetch sensor control settings (BSEC2 error code %d)", this->bsec_status_);
     return;
   }
-  this->next_call_ns_ = this->bsec_settings_.next_call;
 
-  if (this->bsec_settings_.trigger_measurement) {
-    bme68x_get_conf(&bme68x_conf, &this->bme68x_);
+  switch (this->bsec_settings_.op_mode) {
+    case BME68X_FORCED_MODE:
+      bme68x_get_conf(&bme68x_conf, &this->bme68x_);
 
-    bme68x_conf.os_hum = this->bsec_settings_.humidity_oversampling;
-    bme68x_conf.os_temp = this->bsec_settings_.temperature_oversampling;
-    bme68x_conf.os_pres = this->bsec_settings_.pressure_oversampling;
-    bme68x_set_conf(&bme68x_conf, &this->bme68x_);
+      bme68x_conf.os_hum = this->bsec_settings_.humidity_oversampling;
+      bme68x_conf.os_temp = this->bsec_settings_.temperature_oversampling;
+      bme68x_conf.os_pres = this->bsec_settings_.pressure_oversampling;
+      bme68x_set_conf(&bme68x_conf, &this->bme68x_);
+      this->bme68x_heatr_conf_.enable = BME68X_ENABLE;
+      this->bme68x_heatr_conf_.heatr_temp = this->bsec_settings_.heater_temperature;
+      this->bme68x_heatr_conf_.heatr_dur = this->bsec_settings_.heater_duration;
 
-    switch (this->bsec_settings_.op_mode) {
-      case BME68X_FORCED_MODE:
-        this->bme68x_heatr_conf_.enable = BME68X_ENABLE;
-        this->bme68x_heatr_conf_.heatr_temp = this->bsec_settings_.heater_temperature;
-        this->bme68x_heatr_conf_.heatr_dur = this->bsec_settings_.heater_duration;
+      // status = bme68x_set_op_mode(this->bsec_settings_.op_mode, &this->bme68x_);
+      status = bme68x_set_heatr_conf(BME68X_FORCED_MODE, &this->bme68x_heatr_conf_, &this->bme68x_);
+      status = bme68x_set_op_mode(BME68X_FORCED_MODE, &this->bme68x_);
+      this->op_mode_ = BME68X_FORCED_MODE;
+      ESP_LOGV(TAG, "Using forced mode");
 
-        status = bme68x_set_op_mode(this->bsec_settings_.op_mode, &this->bme68x_);
-        status = bme68x_set_heatr_conf(BME68X_FORCED_MODE, &this->bme68x_heatr_conf_, &this->bme68x_);
-        status = bme68x_set_op_mode(BME68X_FORCED_MODE, &this->bme68x_);
-        this->op_mode_ = BME68X_FORCED_MODE;
-        this->sleep_mode_ = false;
-        ESP_LOGV(TAG, "Using forced mode");
+      break;
+    case BME68X_PARALLEL_MODE:
+      if (this->op_mode_ != this->bsec_settings_.op_mode) {
+        bme68x_get_conf(&bme68x_conf, &this->bme68x_);
 
-        break;
-      case BME68X_PARALLEL_MODE:
-        if (this->op_mode_ != this->bsec_settings_.op_mode) {
-          this->bme68x_heatr_conf_.enable = BME68X_ENABLE;
-          this->bme68x_heatr_conf_.heatr_temp_prof = this->bsec_settings_.heater_temperature_profile;
-          this->bme68x_heatr_conf_.heatr_dur_prof = this->bsec_settings_.heater_duration_profile;
-          this->bme68x_heatr_conf_.profile_len = this->bsec_settings_.heater_profile_len;
-          this->bme68x_heatr_conf_.shared_heatr_dur =
-              BSEC_TOTAL_HEAT_DUR -
-              (bme68x_get_meas_dur(BME68X_PARALLEL_MODE, &bme68x_conf, &this->bme68x_) / INT64_C(1000));
-
-          status = bme68x_set_heatr_conf(BME68X_PARALLEL_MODE, &this->bme68x_heatr_conf_, &this->bme68x_);
-
-          status = bme68x_set_op_mode(BME68X_PARALLEL_MODE, &this->bme68x_);
-          this->op_mode_ = BME68X_PARALLEL_MODE;
-          this->sleep_mode_ = false;
-          ESP_LOGV(TAG, "Using parallel mode");
-        }
-        break;
-      case BME68X_SLEEP_MODE:
-        if (!this->sleep_mode_) {
-          bme68x_set_op_mode(BME68X_SLEEP_MODE, &this->bme68x_);
-          this->sleep_mode_ = true;
-          ESP_LOGV(TAG, "Using sleep mode");
-        }
-        break;
-    }
+        bme68x_conf.os_hum = this->bsec_settings_.humidity_oversampling;
+        bme68x_conf.os_temp = this->bsec_settings_.temperature_oversampling;
+        bme68x_conf.os_pres = this->bsec_settings_.pressure_oversampling;
+        bme68x_set_conf(&bme68x_conf, &this->bme68x_);
+
+        this->bme68x_heatr_conf_.enable = BME68X_ENABLE;
+        this->bme68x_heatr_conf_.heatr_temp_prof = this->bsec_settings_.heater_temperature_profile;
+        this->bme68x_heatr_conf_.heatr_dur_prof = this->bsec_settings_.heater_duration_profile;
+        this->bme68x_heatr_conf_.profile_len = this->bsec_settings_.heater_profile_len;
+        this->bme68x_heatr_conf_.shared_heatr_dur =
+            BSEC_TOTAL_HEAT_DUR -
+            (bme68x_get_meas_dur(BME68X_PARALLEL_MODE, &bme68x_conf, &this->bme68x_) / INT64_C(1000));
+
+        status = bme68x_set_heatr_conf(BME68X_PARALLEL_MODE, &this->bme68x_heatr_conf_, &this->bme68x_);
+
+        status = bme68x_set_op_mode(BME68X_PARALLEL_MODE, &this->bme68x_);
+        this->op_mode_ = BME68X_PARALLEL_MODE;
+        ESP_LOGV(TAG, "Using parallel mode");
+      }
+      break;
+    case BME68X_SLEEP_MODE:
+      if (this->op_mode_ != this->bsec_settings_.op_mode) {
+        bme68x_set_op_mode(BME68X_SLEEP_MODE, &this->bme68x_);
+        this->op_mode_ = BME68X_SLEEP_MODE;
+        ESP_LOGV(TAG, "Using sleep mode");
+      }
+      break;
+  }
 
+  if (this->bsec_settings_.trigger_measurement && this->bsec_settings_.op_mode != BME68X_SLEEP_MODE) {
     uint32_t meas_dur = 0;
     meas_dur = bme68x_get_meas_dur(this->op_mode_, &bme68x_conf, &this->bme68x_);
     ESP_LOGV(TAG, "Queueing read in %uus", meas_dur);

esphome/components/bme68x_bsec2/bme68x_bsec2.h

@@ -113,13 +113,11 @@ class BME68xBSEC2Component : public Component {
 
   struct bme68x_heatr_conf bme68x_heatr_conf_;
   uint8_t op_mode_;  // operating mode of sensor
-  bool sleep_mode_;
   bsec_library_return_t bsec_status_{BSEC_OK};
   int8_t bme68x_status_{BME68X_OK};
 
   int64_t last_time_ms_{0};
   uint32_t millis_overflow_counter_{0};
-  int64_t next_call_ns_{0};
 
   std::queue<std::function<void()>> queue_;
 

esphome/components/esp32_ble_tracker/esp32_ble_tracker.cpp

@@ -65,6 +65,9 @@ void ESP32BLETracker::setup() {
       [this](ota::OTAState state, float progress, uint8_t error, ota::OTAComponent *comp) {
         if (state == ota::OTA_STARTED) {
           this->stop_scan();
+          for (auto *client : this->clients_) {
+            client->disconnect();
+          }
         }
       });
 #endif

esphome/components/i2s_audio/speaker/i2s_audio_speaker.cpp

@@ -99,14 +99,6 @@ void I2SAudioSpeaker::setup() {
     this->mark_failed();
     return;
   }
-
-  this->i2s_event_queue_ = xQueueCreate(I2S_EVENT_QUEUE_COUNT, sizeof(i2s_event_t));
-
-  if (this->i2s_event_queue_ == nullptr) {
-    ESP_LOGE(TAG, "Failed to create I2S event queue");
-    this->mark_failed();
-    return;
-  }
 }
 
 void I2SAudioSpeaker::loop() {
@@ -339,7 +331,7 @@ void I2SAudioSpeaker::speaker_task(void *params) {
 }
 
 void I2SAudioSpeaker::start() {
-  if (this->is_failed() || this->status_has_error())
+  if (!this->is_ready() || this->is_failed() || this->status_has_error())
     return;
   if ((this->state_ == speaker::STATE_STARTING) || (this->state_ == speaker::STATE_RUNNING))
     return;
@@ -519,7 +511,6 @@ void I2SAudioSpeaker::delete_task_(size_t buffer_size) {
   }
 
   xEventGroupSetBits(this->event_group_, SpeakerEventGroupBits::STATE_STOPPED);
-  xQueueReset(this->i2s_event_queue_);
 
   this->task_created_ = false;
   vTaskDelete(nullptr);

esphome/components/i2s_audio/speaker/i2s_audio_speaker.h

@@ -23,7 +23,7 @@ namespace i2s_audio {
 
 class I2SAudioSpeaker : public I2SAudioOut, public speaker::Speaker, public Component {
  public:
-  float get_setup_priority() const override { return esphome::setup_priority::LATE; }
+  float get_setup_priority() const override { return esphome::setup_priority::PROCESSOR; }
 
   void setup() override;
   void loop() override;

esphome/components/ld2420/ld2420.cpp

@@ -180,7 +180,7 @@ void LD2420Component::apply_config_action() {
 }
 
 void LD2420Component::factory_reset_action() {
-  ESP_LOGCONFIG(TAG, "Setiing factory defaults...");
+  ESP_LOGCONFIG(TAG, "Setting factory defaults...");
   if (this->set_config_mode(true) == LD2420_ERROR_TIMEOUT) {
     ESP_LOGE(TAG, "LD2420 module has failed to respond, check baud rate and serial connections.");
     this->mark_failed();

esphome/components/sdm_meter/sdm_meter.cpp

@@ -38,7 +38,7 @@ void SDMMeter::on_modbus_data(const std::vector<uint8_t> &data) {
 
     ESP_LOGD(
         TAG,
-        "SDMMeter Phase %c: V=%.3f V, I=%.3f A, Active P=%.3f W, Apparent P=%.3f VA, Reactive P=%.3f VAR, PF=%.3f, "
+        "SDMMeter Phase %c: V=%.3f V, I=%.3f A, Active P=%.3f W, Apparent P=%.3f VA, Reactive P=%.3f var, PF=%.3f, "
         "PA=%.3f °",
         i + 'A', voltage, current, active_power, apparent_power, reactive_power, power_factor, phase_angle);
     if (phase.voltage_sensor_ != nullptr)

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "2024.11.0b1"
+__version__ = "2024.11.0b2"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 VALID_SUBSTITUTIONS_CHARACTERS = (
@@ -1095,7 +1095,7 @@ UNIT_STEPS = "steps"
 UNIT_VOLT = "V"
 UNIT_VOLT_AMPS = "VA"
 UNIT_VOLT_AMPS_HOURS = "VAh"
-UNIT_VOLT_AMPS_REACTIVE = "VAR"
+UNIT_VOLT_AMPS_REACTIVE = "var"
 UNIT_VOLT_AMPS_REACTIVE_HOURS = "VARh"
 UNIT_WATT = "W"
 UNIT_WATT_HOURS = "Wh"

{esphome-2024.11.0b1.dist-info → esphome-2024.11.0b2.dist-info}/METADATA

@@ -1,6 +1,6 @@
 Metadata-Version: 2.1
 Name: esphome
-Version: 2024.11.0b1
+Version: 2024.11.0b2
 Summary: Make creating custom firmwares for ESP32/ESP8266 super easy.
 Author-email: The ESPHome Authors <esphome@nabucasa.com>
 License: MIT

{esphome-2024.11.0b1.dist-info → esphome-2024.11.0b2.dist-info}/RECORD

@@ -5,7 +5,7 @@ esphome/codegen.py,sha256=GePHUM7xdXb_Pil59SHVsXg2F4VBPgkH-Fz2PDX8Z54,1873
 esphome/config.py,sha256=nOiXPZv8wHtmytkNlGcewp0uuJd9G5rRjkqevYXtjzo,39618
 esphome/config_helpers.py,sha256=MKf_wzO35nn41FvigXE0iYKDslPgL2ruf8R-EPtTT2I,3256
 esphome/config_validation.py,sha256=RaF7hC9-VwtWA8C6vYaKVzyz4XqeoOOajr3EJDnaBaI,66311
-esphome/const.py,sha256=Ih-5bSQlMPrMXQH7J4-cf4Tw-PKXcHvZ6LcevLSfIBk,40261
+esphome/const.py,sha256=5FDAKAoaQ4XOuFEDIKVwNq0X5Xlhcfd5arInNhLIjCQ,40261
 esphome/coroutine.py,sha256=j_14z8dIIzIBeuNO30D4c1RJvMMt1xZFZ58Evd-EvJA,9344
 esphome/cpp_generator.py,sha256=lXPXHYUsFIvBSAoZ93mXYlGcXYg5L18nTtYGHE4_rr8,31203
 esphome/cpp_helpers.py,sha256=6C2vNbOIhZKi43xRVlk5hp9GfshfBn-rc5D_ZFUEYaE,4801
@@ -387,8 +387,8 @@ esphome/components/bme680_bsec/bme680_bsec.h,sha256=aUGZXwSiu0wOlt13_mxhy0yKxToA
 esphome/components/bme680_bsec/sensor.py,sha256=w26_mIroRS4r8ZWZb_kPnFih1G17cschuzqnHly5ZAM,4012
 esphome/components/bme680_bsec/text_sensor.py,sha256=9CsWVu3VLV74nnrpChN9IabeZDhkwEi_G2xHdHFrpRI,920
 esphome/components/bme68x_bsec2/__init__.py,sha256=ZHqqKsnyQh9LYyZAfvRhZPgs1actOKRugZPqG4r3aiw,6161
-esphome/components/bme68x_bsec2/bme68x_bsec2.cpp,sha256=kTbYtw5SztJVQj71mAIY4cl2U-CHNG9GBVtew47d8T8,20223
-esphome/components/bme68x_bsec2/bme68x_bsec2.h,sha256=BkOXWdcLh5WN0wr-Sgz0y60Mq46ANIHd_Fyu5jfDfY0,5463
+esphome/components/bme68x_bsec2/bme68x_bsec2.cpp,sha256=2ol94BS57jvthW_1AmC-moSy7zdFLHeA0tE39owL0aI,20477
+esphome/components/bme68x_bsec2/bme68x_bsec2.h,sha256=EVck6JgQOYydwRfO9Vvv5YgY4CDiMMwHzOXozJZZsNA,5415
 esphome/components/bme68x_bsec2/sensor.py,sha256=fZ04TAM3yw9ly0_x48IxoPylCMjwYNRAeErqm1U3Uqo,4254
 esphome/components/bme68x_bsec2/text_sensor.py,sha256=ASxXU6gdsqXnnf7aqYQdokpMGkqJemkpwSazu_Cfq6E,909
 esphome/components/bme68x_bsec2_i2c/__init__.py,sha256=6QtxvZcW0h5iZv9YyBIAgT0QSOJti4sTJCGewQ3YQtI,766
@@ -820,7 +820,7 @@ esphome/components/esp32_ble_server/ble_service.cpp,sha256=zs-xQT9ISP8hn40DoL3k9
 esphome/components/esp32_ble_server/ble_service.h,sha256=MTQ1FsfwMgDoDiLNo0RqPObE8b9sE4NcCSVxlmR49v8,2328
 esphome/components/esp32_ble_tracker/__init__.py,sha256=Sgr8LKTUWh5nC2bh_iKNlQQZY7GSRr5FLG2QxI-piaY,12362
 esphome/components/esp32_ble_tracker/automation.h,sha256=0pDA6EX__f14sT0KJwcnqg7UOsueKjjegHPznQj9biw,3795
-esphome/components/esp32_ble_tracker/esp32_ble_tracker.cpp,sha256=x0e81DwrOvBl9RSryR-i9ASagHE9m2qBuPSzEIfn7fY,26439
+esphome/components/esp32_ble_tracker/esp32_ble_tracker.cpp,sha256=fv_2osjqejPyR-UeWChjYkTeYU_9zw5bmc3OVew-M9k,26533
 esphome/components/esp32_ble_tracker/esp32_ble_tracker.h,sha256=9PE-RHLPS0uax7Zb5EnV4Yinmhyss-BZ9SmqbxxOPIs,8875
 esphome/components/esp32_camera/__init__.py,sha256=qhJ3Jgv1gum3m8kfkOFZLK7TLNsbuHZxIrqxBb11mz0,12649
 esphome/components/esp32_camera/esp32_camera.cpp,sha256=Ba2nu453rF4FDSlIJwD5sLnzE8ru4kKK4xVCvMdoyac,16960
@@ -1204,8 +1204,8 @@ esphome/components/i2s_audio/microphone/__init__.py,sha256=bUKAY5HBZrBJGufEA9MkC
 esphome/components/i2s_audio/microphone/i2s_audio_microphone.cpp,sha256=-AN8LLxtcLp9r-JCpfSG2huLk3ptbgijvKsH-XWl3XQ,6228
 esphome/components/i2s_audio/microphone/i2s_audio_microphone.h,sha256=dMNlVDWJ8Agz8NJe0pNvxDN9ZM9GMU3XNxPqQgHLQ5c,1036
 esphome/components/i2s_audio/speaker/__init__.py,sha256=DcG-0I2ETqk3akuTvzl7szVERy99qEgo-Ma8iFJjN4c,4013
-esphome/components/i2s_audio/speaker/i2s_audio_speaker.cpp,sha256=JplMNgfwxrV_5mDdn_3VTkxl6eaDcddQ_BgPVacP20k,20397
-esphome/components/i2s_audio/speaker/i2s_audio_speaker.h,sha256=2coh-0jpkgB93olsrB5gp3uKmbrfiN6f2Uege9s4JUQ,6500
+esphome/components/i2s_audio/speaker/i2s_audio_speaker.cpp,sha256=_A6wSdfJ9Eos_8v4RIeik8Eco26u9GytV_xjUj1WpyQ,20153
+esphome/components/i2s_audio/speaker/i2s_audio_speaker.h,sha256=KELo3Nxxss3lMCyUO4CQQiqd9aG0argbANTTSfCd5aU,6505
 esphome/components/iaqcore/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
 esphome/components/iaqcore/iaqcore.cpp,sha256=hKSC0Xar693LMqOHpYShl_-VdWkKc18i21AzjdjB7e4,2268
 esphome/components/iaqcore/iaqcore.h,sha256=wYuMlxOawAHkok41WzryDsV-2a4-YTsG0TU-gfP-ZyE,678
@@ -1347,7 +1347,7 @@ esphome/components/ld2410/switch/bluetooth_switch.h,sha256=B-oPEG1KV23aATKLLRqqt
 esphome/components/ld2410/switch/engineering_mode_switch.cpp,sha256=DtyDtB0m9xyiEjfrKCg_z0aUVlexvS2t6EdkZ_j1S4Q,258
 esphome/components/ld2410/switch/engineering_mode_switch.h,sha256=YtfYVHHSWRic0qg9iei16S52urpQHAeUMddDXon2EII,364
 esphome/components/ld2420/__init__.py,sha256=RsAhN7qo0D3m3OkUTYOCgaILRkG1ORX3EMAI92qwlFo,898
-esphome/components/ld2420/ld2420.cpp,sha256=DRXAODnYlI2I9xzXQA5MZ_VmH4-mJcYMmos2_5AsB30,31819
+esphome/components/ld2420/ld2420.cpp,sha256=VwVEdDEwaF00hhFypHbC02_8RoEpTNHC16Jx9PmR5fY,31819
 esphome/components/ld2420/ld2420.h,sha256=WxZbC3l7cc8dOJgSFVPnM5MYrOAKrFfrP4VdRBfWnXI,11863
 esphome/components/ld2420/binary_sensor/__init__.py,sha256=z6nd2xRbTZnMA7dDyAyc0ya52OOYbAaDlRFI7xM0iUQ,1099
 esphome/components/ld2420/binary_sensor/ld2420_binary_sensor.cpp,sha256=c-uJCQ2TMZmTrmMlzy0KBVaAJlaykmfVxkysBPXGcl8,396
@@ -2377,7 +2377,7 @@ esphome/components/sdl/sdl_esphome.h,sha256=Zm10wrvS2U3_KdRxIXqRYlDsKHy6Ar80aj9l
 esphome/components/sdl/touchscreen/__init__.py,sha256=n7dRzjNzDuM7hfACtgJmneufLWH_xM05FstsDBxxgnQ,633
 esphome/components/sdl/touchscreen/sdl_touchscreen.h,sha256=dgw2wGuEvjX6zbPjqMOPLkOl-aVYVWxY7n7Gc_kAKm0,595
 esphome/components/sdm_meter/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
-esphome/components/sdm_meter/sdm_meter.cpp,sha256=QSvx5YJAoPEL654tSIZHH_CxafyU4uqo_VcQQSmsLac,5223
+esphome/components/sdm_meter/sdm_meter.cpp,sha256=xJOcz4A7d7USwbUuYn5dY3kMZk3c0RGNg9ihMdizAwQ,5223
 esphome/components/sdm_meter/sdm_meter.h,sha256=-ZrIeuFjRgAWkrOvHjNFtbUihjeHa_dcspmuNLzY6vQ,3449
 esphome/components/sdm_meter/sdm_meter_registers.h,sha256=8aESi_oho70EyVeMcmfA1NO0bWilxuuUiq-Lc5llaF8,5891
 esphome/components/sdm_meter/sensor.py,sha256=2A1WjaUrtmLc0auiN5RgiWHTlkfT0XzgBCWxCQ-ETrE,6172
@@ -3355,9 +3355,9 @@ esphome/dashboard/util/itertools.py,sha256=8eLrWEWmICLtXNxkKdYPQV0c_N4GEz8m9Npnb
 esphome/dashboard/util/password.py,sha256=cQz3b9B-ijTe7zS6BeCW0hc3pWv6JjC78jmnycYYAh8,321
 esphome/dashboard/util/subprocess.py,sha256=T8EW6dbU4LPd2DG1dRrdh8li71tt6J1isn411poMhkk,1022
 esphome/dashboard/util/text.py,sha256=ENDnfN4O0NdA3CKVJjQYabFbwbrsIhVKrAMQe53qYu4,534
-esphome-2024.11.0b1.dist-info/LICENSE,sha256=HzEjkBInJe44L4WvAOPfhPJJDNj6YbnqFyvGWRzArGM,36664
-esphome-2024.11.0b1.dist-info/METADATA,sha256=yLww3VPi9ijklr74bZ2oukYce9eXI94nOaMHwkwJ5aM,3455
-esphome-2024.11.0b1.dist-info/WHEEL,sha256=GJ7t_kWBFywbagK5eo9IoUwLW6oyOeTKmQ-9iHFVNxQ,92
-esphome-2024.11.0b1.dist-info/entry_points.txt,sha256=mIxVNuWtbYzeEcaWCl-AQ-97aBOWbnYBAK8nbF6P4M0,50
-esphome-2024.11.0b1.dist-info/top_level.txt,sha256=0GSXEW3cnITpgG3qnsSMz0qoqJHAFyfw7Y8MVtEf1Yk,8
-esphome-2024.11.0b1.dist-info/RECORD,,
+esphome-2024.11.0b2.dist-info/LICENSE,sha256=HzEjkBInJe44L4WvAOPfhPJJDNj6YbnqFyvGWRzArGM,36664
+esphome-2024.11.0b2.dist-info/METADATA,sha256=ibM7RnyCmrX_-gOxTnBJU6MSYOfpH2HzgYnABoXgQp4,3455
+esphome-2024.11.0b2.dist-info/WHEEL,sha256=GJ7t_kWBFywbagK5eo9IoUwLW6oyOeTKmQ-9iHFVNxQ,92
+esphome-2024.11.0b2.dist-info/entry_points.txt,sha256=mIxVNuWtbYzeEcaWCl-AQ-97aBOWbnYBAK8nbF6P4M0,50
+esphome-2024.11.0b2.dist-info/top_level.txt,sha256=0GSXEW3cnITpgG3qnsSMz0qoqJHAFyfw7Y8MVtEf1Yk,8
+esphome-2024.11.0b2.dist-info/RECORD,,