engeom 0.2.10__cp38-abi3-win_amd64.whl → 0.2.11__cp38-abi3-win_amd64.whl

engeom/geom3.pyi

@@ -461,6 +461,29 @@ class Iso3:
         """
         ...
 
+    @staticmethod
+    def from_xyzwpr(x: float, y: float, z: float, w: float, p: float, r: float) -> Iso3:
+        """
+        Create an isometry from the specified translation and rotation angles in yaw, pitch, and roll format, following
+        the convention typically used in robotics. The angles are specified in degrees.
+        :param x:
+        :param y:
+        :param z:
+        :param w:
+        :param p:
+        :param r:
+        :return:
+        """
+        ...
+
+    def to_xyzwpr(self) -> List[float]:
+        """
+        Convert the isometry to a list of translation and rotation angles in yaw, pitch, and roll format, following the
+        convention typically used in robotics. The angles are returned in degrees.
+        :return: a list of 6 floats representing the translation and rotation angles.
+        """
+        ...
+
     def __matmul__(self, other: Transformable3) -> Transformable3:
         """
         Multiply another object by the isometry, transforming it and returning a new object of the same type.
@@ -537,6 +560,14 @@ class Iso3:
         """
         ...
 
+    @property
+    def origin(self) -> Point3:
+        """
+        Get the origin of the isometry as a Point3 object.
+        :return: a Point3 object representing the origin of the isometry.
+        """
+        ...
+
     def translation(self) -> Iso3:
         """
         Return the translation component of the isometry as a separate isometry.
@@ -1157,14 +1188,14 @@ class Mesh:
         ...
 
     @staticmethod
-    def create_box(width: float, height: float, depth: float) -> Mesh:
+    def create_box(length: float, width: float, height: float) -> Mesh:
         """
-        Creates a box with the corner at the origin and the specified width, height, and depth all positive.
+        Creates a box with the center at the origin and the specified length, width, and height
 
-        :param width:
-        :param height:
-        :param depth:
-        :return:
+        :param length: the size of the box along the X-axis
+        :param width: the size of the box along the Y-axis
+        :param height: the size of the box along the Z-axis
+        :return: a new `Mesh` object representing the box
         """
         ...
 
@@ -1172,14 +1203,91 @@ class Mesh:
     def create_cylinder(radius: float, height: float, steps: int) -> Mesh:
         """
         Creates a cylinder with a radius and height. The cylinder will be centered at the origin and oriented along the
-        Z-axis. The bottom of the cylinder will be at Z = 0 and the top will be at Z = height. The cylinder will be
-        created with a number of steps around the circumference, which will determine the number of vertices used to
-        create the cylinder. The number of steps should be at least 3. The first set of vertices will be at X = radius,
-        Y = 0.
-        :param radius:
-        :param height:
-        :param steps:
-        :return:
+        Y-axis.
+
+        :param radius: the radius of the cylinder
+        :param height: the size of the cylinder along the Y-axis
+        :param steps: the number of subdivisions to create vertices around the cylinder. The more steps the smoother the
+        cylinder will be.
+        :return: a new `Mesh` object representing the cylinder
+        """
+        ...
+
+    @staticmethod
+    def create_sphere(radius: float, n_theta: int, n_phi: int) -> Mesh:
+        """
+        Creates a sphere with a radius. The sphere will be centered at the origin. The step counts `n_theta` and `n_phi`
+        will determine the smoothness of the sphere in the radial (n_theta) and polar (n_phi) directions. The poles
+        will be located at Y=+radius and Y=-radius, and the equator will lie in the XZ plane.
+
+        :param radius: the radius of the sphere
+        :param n_theta: the number of subdivisions to create vertices around the sphere in the theta direction
+        :param n_phi: the number of subdivisions to create vertices around the sphere in the phi direction
+        :return: a new `Mesh` object representing the sphere
+        """
+        ...
+
+    @staticmethod
+    def create_cone(radius: float, height: float, steps: int) -> Mesh:
+        """
+        Creates a cone with a radius and height. The cone will be centered at the origin and oriented so that the
+        point of the cone is located at Y=height/2 and the base is located at Y=-height/2.
+
+        :param radius: the radius of the base of the cone
+        :param height: the size of the cone along the Y-axis
+        :param steps: the number of subdivisions to create vertices around the cone. The more steps the smoother the
+        cone will be.
+        :return: a new `Mesh` object representing the cone
+        """
+        ...
+
+    @staticmethod
+    def create_capsule(p0: Point3, p1: Point3, radius: float, n_theta: int, n_phi: int) -> Mesh:
+        """
+        Creates a capsule shape between two points with a specified radius. The capsule will be centered between the two
+        points and oriented along the line connecting them. The step counts `n_theta` and `n_phi` will determine the
+        smoothness of the sphere in the radial (n_theta) and polar (n_phi) directions.
+
+        :param p0: the first point of the capsule
+        :param p1: the second point of the capsule
+        :param radius: the radius of the capsule
+        :param n_theta: the number of subdivisions to create vertices around the sphere in the theta direction
+        :param n_phi: the number of subdivisions to create vertices around the sphere in the phi direction
+        :return: a new `Mesh` object representing the capsule
+        """
+        ...
+
+    @staticmethod
+    def create_cylinder_between(p0: Point3, p1: Point3, radius: float, steps: int) -> Mesh:
+        """
+        Creates a cylinder between two points with a specified radius. The cylinder will be centered between the two
+        points and oriented along the line connecting them.
+
+        :param p0: the first point of the cylinder
+        :param p1: the second point of the cylinder
+        :param radius: the radius of the cylinder
+        :param steps: the number of subdivisions to create vertices around the cylinder. The more steps the smoother the
+        cylinder will be.
+        :return: a new `Mesh` object representing the cylinder
+        """
+        ...
+
+    @staticmethod
+    def create_rect_beam_between(p0: Point3, p1: Point3, width: float, height: float, up: Vector3 | None = None) -> Mesh:
+        """
+        Create a rectangular cross-sectioned prism between two points with a specified width and height. The prism will
+        be centered between the two points and oriented along the line connecting them. The up vector's projection onto
+        the line connecting the two end points will determine the direction of the height of the prism. If None, the
+        height will be aligned with the projection of the Z-axis.
+
+        If the up vector is parallel to the line connecting the two points, an error will be thrown.
+
+        :param p0: the first point of the prism
+        :param p1: the second point of the prism
+        :param width: the width of the prism
+        :param height: the height of the prism
+        :param up: the up vector to use for the height direction. If None, the Z-axis will be used
+        :return: a new `Mesh` object representing the prism
         """
         ...
 
@@ -1304,6 +1412,7 @@ class MeshCollisionSet:
         """
         ...
 
+
 class CurveStation3:
     """
     A class representing a station along a curve in 3D space. The station is represented by a point on the curve, a

{engeom-0.2.10.dist-info → engeom-0.2.11.dist-info}/METADATA

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: engeom
-Version: 0.2.10
+Version: 0.2.11
 Classifier: Programming Language :: Rust
 Classifier: Programming Language :: Python :: Implementation :: CPython
 Classifier: Programming Language :: Python :: Implementation :: PyPy

{engeom-0.2.10.dist-info → engeom-0.2.11.dist-info}/RECORD

@@ -1,5 +1,5 @@
-engeom-0.2.10.dist-info/METADATA,sha256=zWWQuZHUR5qdy8rlpErS2jgOoXuek9CP3bqN0gRQBLs,498
-engeom-0.2.10.dist-info/WHEEL,sha256=hKPP3BCTWtTwj6SFaSI--T5aOGqh_llYfbZ_BsqivwA,94
+engeom-0.2.11.dist-info/METADATA,sha256=0wfaJ6d1GSA-0ki0ISulCq8dfNZViDVrj1_ZMTUV31I,498
+engeom-0.2.11.dist-info/WHEEL,sha256=hKPP3BCTWtTwj6SFaSI--T5aOGqh_llYfbZ_BsqivwA,94
 engeom/airfoil/__init__.py,sha256=gpS9pVepUu90XJ-ePndNupbUMKI0RGxNXPxD9x0iVHY,274
 engeom/airfoil.pyi,sha256=VTeJBoS9Iij7p-92R7jCqzPasHmvAUocyzc6BSx7mvM,23557
 engeom/align/__init__.py,sha256=SEeMqeqLKqJC73Mg8GwPwd9NwWnl-dcCqJ4rPdh8yyc,196
@@ -8,7 +8,7 @@ engeom/engeom.pyi,sha256=J0L_D-Sc2laJHL36nUAvIP3eN9BDryAxd_6aMQarlZc,1561
 engeom/geom2/__init__.py,sha256=JFpiLyROUh6vyakG-7JDSlCMCn4QB2MQ8bz3uVCaAIk,373
 engeom/geom2.pyi,sha256=uMi4WD6-DtFx8H-RZsKIi-p1fN4p8SzOfBZmEuvNGDU,44357
 engeom/geom3/__init__.py,sha256=l8B0iDhJ4YiRbslJLN791XWai2DWrpmZptnzIETMS9g,370
-engeom/geom3.pyi,sha256=VYxc9kZQhfHNN13E1DpAzea9z6R6gvpKtxyL8Wm9oWU,69140
+engeom/geom3.pyi,sha256=XQKy3lEDybh-81uN7y6DNncj7w6LpR2haF7YTg8TwXg,74421
 engeom/metrology/__init__.py,sha256=XvEhG8uDm1olWwZHDDrQv9LFP5zXhbsGx27PqRq8WE0,304
 engeom/metrology.pyi,sha256=9I5un86VB_2gmQBrVYhX8JzILTUADMLB9Em8ttJxrWg,4044
 engeom/plot.py,sha256=LTqqO-h1EJL6wanM0hB79s9ohWwaCIijMOHVplY3vmc,1079
@@ -21,5 +21,5 @@ engeom/_plot/matplotlib.py,sha256=rFL1CPNMUqGO-fwD45V3-shektBMeNq5U15Zxp96hYw,14
 engeom/_plot/pyvista.py,sha256=PylGVOa9RtRIYPyHLy969eyW8yIgAk-URVZT0R7WoQ8,12980
 engeom/_plot/__init__.py,sha256=F_KviZtxzZGwfEjjn8Ep46N4UVl8VpFJWBzbBUE_J7A,30
 engeom/__init__.py,sha256=kYgFq3jq1quDfV013wEYQMlUBz4QNSpP6u8lFiuTHvc,115
-engeom/engeom.pyd,sha256=rr9E3GHfo4t5EjTOEaB5R5bHUnzFBUJjAm20v3fCMr0,2720768
-engeom-0.2.10.dist-info/RECORD,,
+engeom/engeom.pyd,sha256=abHGragpjFER8i_46ihIfX-IFW-c0pWjFMHdoOCmR74,2757632
+engeom-0.2.11.dist-info/RECORD,,