dlubal.api 2.12.1__py3-none-any.whl → 2.12.2__py3-none-any.whl

dlubal/api/rstab/structure_core/member_representative_pb2.pyi

@@ -9,7 +9,7 @@ from typing import ClassVar as _ClassVar, Iterable as _Iterable, Mapping as _Map
 DESCRIPTOR: _descriptor.FileDescriptor
 
 class MemberRepresentative(_message.Message):
-    __slots__ = ("no", "type", "activate_load_transfer", "is_deactivated_for_calculation", "section_distribution_type", "reference_type", "nodes", "node_start", "node_end", "analytical_length", "analytical_volume", "analytical_mass", "analytical_surface_of_coating", "analytical_center_of_gravity", "analytical_center_of_gravity_x", "analytical_center_of_gravity_y", "analytical_center_of_gravity_z", "length", "volume", "mass", "surface_of_coating", "center_of_gravity", "center_of_gravity_x", "center_of_gravity_y", "center_of_gravity_z", "position", "position_short", "member_representative", "design_properties_via_member", "design_properties_via_parent_member_set", "design_properties_parent_member_set", "design_properties_via_building_object", "design_properties_building_object_owner", "design_properties_via_design_strip", "design_properties_design_strip_owner", "comment", "is_member_weight_enabled", "member_weight", "loaded_nodes", "excluded_nodes", "joist_type", "joist_series", "max_joist_depth", "member_type_rib_alignment", "align_local_z_axis_to_local_z_axis_of_surface", "flange_dimensions", "synchronize_width_mode", "member_type_definable_stiffness", "result_beam_include_surface_cells", "result_beam_include_all_surface_cells", "result_beam_exclude_surface_cells", "design_strip_integrate_stresses_and_forces", "design_strip_y_z", "design_strip_y_plus", "design_strip_z_plus", "design_strip_y_minus", "design_strip_z_minus", "design_strip_radius", "design_strip_include_surfaces", "shear_wall_integrate_stresses_and_forces", "shear_wall_y_z", "shear_wall_y_plus", "shear_wall_z_plus", "shear_wall_y_minus", "shear_wall_z_minus", "shear_wall_radius", "shear_wall_include_surfaces", "shear_wall_include_surface_cells", "deep_beam_integrate_stresses_and_forces", "deep_beam_y_z", "deep_beam_y_plus", "deep_beam_z_plus", "deep_beam_y_minus", "deep_beam_z_minus", "deep_beam_radius", "deep_beam_include_surfaces", "deep_beam_include_surface_cells", "result_line_integrate_stresses_and_forces", "result_line_y_z", "result_line_y_plus", "result_line_z_plus", "result_line_y_minus", "result_line_z_minus", "result_line_radius", "result_line_include_surfaces", "result_line_include_all_surfaces", "result_line_include_surface_cells", "result_line_include_all_surface_cells", "result_line_include_solids", "result_line_include_all_solids", "result_line_include_members", "result_line_include_all_members", "result_line_exclude_surfaces", "result_line_exclude_surface_cells", "result_line_exclude_solids", "result_line_exclude_members", "projected_length", "section_distance_from_start_is_defined_as_relative", "section_distance_from_start_absolute", "section_distance_from_start_relative", "section_distance_from_end_is_defined_as_relative", "section_distance_from_end_absolute", "section_distance_from_end_relative", "section_alignment", "grain_alignment", "curved_member_is_asymmetric_layout", "curved_member_is_cantilevers", "curved_member_cantilevers_type", "rotation_specification_type", "rotation_angle", "rotation_help_node", "rotation_plane_type", "is_rotated", "section_start", "section_end", "section_internal", "section_taper_end", "section_taper_start", "section_material", "nodes_on_member_definition_type", "nodes_on_member_assignment", "nodes_on_member_reference", "nodes_on_member_start_at", "nodes_on_member_node_distances", "member_hinge_start", "member_hinge_end", "member_eccentricity_start", "member_eccentricity_end", "support", "member_transverse_stiffener", "member_diagonal_brace", "member_openings", "member_nonlinearity", "is_active_in_compression", "member_result_intermediate_point", "pile_resistance", "concrete_effective_lengths", "steel_effective_lengths", "timber_effective_lengths", "aluminum_effective_lengths", "concrete_shear_reinforcement_spans", "concrete_longitudinal_reinforcement_items", "concrete_cover_user_defined_enabled", "concrete_cover_different_at_section_sides_enabled", "concrete_cover", "concrete_cover_top", "concrete_cover_bottom", "concrete_cover_left", "concrete_cover_right", "concrete_cover_min", "concrete_cover_min_top", "concrete_cover_min_bottom", "concrete_cover_min_left", "concrete_cover_min_right", "concrete_durability", "concrete_durability_top", "concrete_durability_bottom", "concrete_durability_left", "concrete_durability_right", "steel_boundary_conditions", "steel_member_local_section_reduction", "steel_member_transverse_weld", "timber_service_class", "timber_moisture_class", "timber_service_conditions", "timber_member_local_section_reduction", "aluminum_boundary_conditions", "aluminum_member_local_section_reduction", "aluminum_member_transverse_weld", "stress_analysis_configuration", "member_aluminum_design_uls_configuration", "member_aluminum_design_sls_configuration", "member_aluminum_design_fr_configuration", "member_concrete_design_uls_configuration", "member_concrete_design_sls_configuration", "member_concrete_design_fr_configuration", "member_concrete_design_seismic_configuration", "member_steel_design_uls_configuration", "member_steel_design_sls_configuration", "member_steel_design_fr_configuration", "member_steel_design_seismic_configuration", "member_timber_design_uls_configuration", "member_timber_design_sls_configuration", "member_timber_design_fr_configuration", "end_modifications_member_start_extension", "end_modifications_member_start_slope_y", "end_modifications_member_start_slope_z", "end_modifications_member_end_extension", "end_modifications_member_end_slope_y", "end_modifications_member_end_slope_z", "has_any_end_modifications", "deflection_check_direction", "deflection_check_displacement_reference", "deflection_segments_z_axis", "deflection_segments_y_axis", "design_support_on_member_start", "design_support_on_member_end", "design_supports_on_internal_nodes", "deflection_segments_defined_length_z_axis_enabled", "deflection_segments_defined_length_y_axis_enabled", "member_type_spring", "member_type_damper_spring", "member_type_damper_damping_coefficient", "member_tendon_table", "bim_ifc_properties", "tendon_type", "tendon_anchor_start", "tendon_anchor_end", "has_autoconnect_member_master_objects_active", "tendon_member_master_objects", "tendon_member_set_master_objects", "tendon_surface_master_objects", "has_autoconnect_surface_master_object_active", "anchor_unbonded_tendon_section", "anchor_unbonded_tendon_location", "anchor_grout_body_bond_length_is_defined_as_relative", "anchor_grout_body_bond_length_relative", "anchor_grout_body_bond_length_absolute", "anchor_grout_body_bond_section", "anchor_grout_body_bond_resistance_type", "parent_layer", "is_locked_by_parent_layer", "is_generated", "generating_object_info", "user_defined_name_enabled", "name", "members", "number_of_members", "total_length", "total_volume", "total_mass", "total_surface_of_coating", "nodes_on_member_from_start", "concrete_shear_reinforcement_span", "concrete_longitudinal_reinforcement_span", "id_for_export_import", "metadata_for_export_import")
+    __slots__ = ("no", "type", "activate_load_transfer", "is_deactivated_for_calculation", "section_distribution_type", "reference_type", "nodes", "node_start", "node_end", "analytical_length", "analytical_volume", "analytical_mass", "analytical_surface_of_coating", "analytical_center_of_gravity", "analytical_center_of_gravity_x", "analytical_center_of_gravity_y", "analytical_center_of_gravity_z", "length", "volume", "mass", "surface_of_coating", "center_of_gravity", "center_of_gravity_x", "center_of_gravity_y", "center_of_gravity_z", "position", "position_short", "member_representative", "design_properties_via_member", "design_properties_via_parent_member_set", "design_properties_parent_member_set", "design_properties_via_building_object", "design_properties_building_object_owner", "design_properties_via_design_strip", "design_properties_design_strip_owner", "comment", "is_member_weight_enabled", "member_weight", "loaded_nodes", "excluded_nodes", "joist_type", "joist_series", "max_joist_depth", "member_type_rib_alignment", "align_local_z_axis_to_local_z_axis_of_surface", "flange_dimensions", "synchronize_width_mode", "member_type_definable_stiffness", "result_beam_include_surface_cells", "result_beam_include_all_surface_cells", "result_beam_exclude_surface_cells", "design_strip_integrate_stresses_and_forces", "design_strip_y_z", "design_strip_y_plus", "design_strip_z_plus", "design_strip_y_minus", "design_strip_z_minus", "design_strip_radius", "design_strip_include_surfaces", "shear_wall_integrate_stresses_and_forces", "shear_wall_y_z", "shear_wall_y_plus", "shear_wall_z_plus", "shear_wall_y_minus", "shear_wall_z_minus", "shear_wall_radius", "shear_wall_include_surfaces", "shear_wall_include_surface_cells", "deep_beam_integrate_stresses_and_forces", "deep_beam_y_z", "deep_beam_y_plus", "deep_beam_z_plus", "deep_beam_y_minus", "deep_beam_z_minus", "deep_beam_radius", "deep_beam_include_surfaces", "deep_beam_include_surface_cells", "result_line_integrate_stresses_and_forces", "result_line_y_z", "result_line_y_plus", "result_line_z_plus", "result_line_y_minus", "result_line_z_minus", "result_line_radius", "result_line_include_surfaces", "result_line_include_all_surfaces", "result_line_include_surface_cells", "result_line_include_all_surface_cells", "result_line_include_solids", "result_line_include_all_solids", "result_line_include_members", "result_line_include_all_members", "result_line_exclude_surfaces", "result_line_exclude_surface_cells", "result_line_exclude_solids", "result_line_exclude_members", "projected_length", "section_distance_from_start_is_defined_as_relative", "section_distance_from_start_absolute", "section_distance_from_start_relative", "section_distance_from_end_is_defined_as_relative", "section_distance_from_end_absolute", "section_distance_from_end_relative", "section_alignment", "grain_alignment", "curved_member_is_asymmetric_layout", "curved_member_is_cantilevers", "curved_member_cantilevers_type", "rotation_specification_type", "rotation_angle", "rotation_help_node", "rotation_plane_type", "is_rotated", "section_start", "section_end", "section_internal", "section_taper_end", "section_taper_start", "section_material", "nodes_on_member_definition_type", "nodes_on_member_assignment", "nodes_on_member_reference", "nodes_on_member_start_at", "nodes_on_member_node_distances", "member_hinge_start", "member_hinge_end", "member_eccentricity_start", "member_eccentricity_end", "support", "member_transverse_stiffener", "member_diagonal_brace", "member_openings", "member_nonlinearity", "is_active_in_compression", "member_result_intermediate_point", "pile_resistance", "concrete_effective_lengths", "steel_effective_lengths", "timber_effective_lengths", "aluminum_effective_lengths", "concrete_shear_reinforcement_spans", "concrete_longitudinal_reinforcement_items", "concrete_cover_user_defined_enabled", "concrete_cover_different_at_section_sides_enabled", "concrete_cover", "concrete_cover_top", "concrete_cover_bottom", "concrete_cover_left", "concrete_cover_right", "concrete_cover_min", "concrete_cover_min_top", "concrete_cover_min_bottom", "concrete_cover_min_left", "concrete_cover_min_right", "concrete_durability", "concrete_durability_top", "concrete_durability_bottom", "concrete_durability_left", "concrete_durability_right", "steel_boundary_conditions", "steel_member_local_section_reduction", "steel_member_transverse_weld", "timber_service_class", "timber_moisture_class", "timber_service_conditions", "timber_member_local_section_reduction", "aluminum_boundary_conditions", "aluminum_member_local_section_reduction", "aluminum_member_transverse_weld", "stress_analysis_configuration", "member_aluminum_design_uls_configuration", "member_aluminum_design_sls_configuration", "member_aluminum_design_fr_configuration", "member_concrete_design_uls_configuration", "member_concrete_design_sls_configuration", "member_concrete_design_fr_configuration", "member_concrete_design_seismic_configuration", "member_steel_design_uls_configuration", "member_steel_design_sls_configuration", "member_steel_design_fr_configuration", "member_steel_design_seismic_configuration", "member_timber_design_uls_configuration", "member_timber_design_sls_configuration", "member_timber_design_fr_configuration", "end_modifications_member_start_extension", "end_modifications_member_start_slope_y", "end_modifications_member_start_slope_z", "end_modifications_member_end_extension", "end_modifications_member_end_slope_y", "end_modifications_member_end_slope_z", "has_any_end_modifications", "deflection_check_direction", "deflection_check_displacement_reference", "deflection_segments_z_axis", "deflection_segments_y_axis", "design_support_on_member_start", "design_support_on_member_end", "design_supports_on_internal_nodes", "deflection_segments_defined_length_z_axis_enabled", "deflection_segments_defined_length_y_axis_enabled", "member_type_spring", "member_type_damper_spring", "member_type_damper_damping_coefficient", "member_tendon_table", "bim_ifc_properties", "tendon_type", "tendon_anchor_start", "tendon_anchor_end", "has_autoconnect_member_master_objects_active", "tendon_member_master_objects", "tendon_member_set_master_objects", "tendon_surface_master_objects", "has_autoconnect_surface_master_object_active", "anchor_unbonded_tendon_section", "anchor_unbonded_tendon_location", "anchor_grout_body_bond_length_is_defined_as_relative", "anchor_grout_body_bond_length_relative", "anchor_grout_body_bond_length_absolute", "anchor_grout_body_bond_section", "anchor_grout_body_bond_resistance_type", "wind_simulation_enable_specific_settings", "wind_simulation_shrink_wrapping", "wind_simulation_roughness_and_permeability", "wind_simulation_exclude_from_wind_tunnel", "wind_simulation_member_level_of_detail", "wind_simulation_use_only_external_surface_for_hollow_sections", "parent_layer", "is_locked_by_parent_layer", "is_generated", "generating_object_info", "user_defined_name_enabled", "name", "members", "number_of_members", "total_length", "total_volume", "total_mass", "total_surface_of_coating", "nodes_on_member_from_start", "concrete_shear_reinforcement_span", "concrete_longitudinal_reinforcement_span", "id_for_export_import", "metadata_for_export_import")
     class Type(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
         __slots__ = ()
         TYPE_UNKNOWN: _ClassVar[MemberRepresentative.Type]
@@ -3872,6 +3872,12 @@ class MemberRepresentative(_message.Message):
     ANCHOR_GROUT_BODY_BOND_LENGTH_ABSOLUTE_FIELD_NUMBER: _ClassVar[int]
     ANCHOR_GROUT_BODY_BOND_SECTION_FIELD_NUMBER: _ClassVar[int]
     ANCHOR_GROUT_BODY_BOND_RESISTANCE_TYPE_FIELD_NUMBER: _ClassVar[int]
+    WIND_SIMULATION_ENABLE_SPECIFIC_SETTINGS_FIELD_NUMBER: _ClassVar[int]
+    WIND_SIMULATION_SHRINK_WRAPPING_FIELD_NUMBER: _ClassVar[int]
+    WIND_SIMULATION_ROUGHNESS_AND_PERMEABILITY_FIELD_NUMBER: _ClassVar[int]
+    WIND_SIMULATION_EXCLUDE_FROM_WIND_TUNNEL_FIELD_NUMBER: _ClassVar[int]
+    WIND_SIMULATION_MEMBER_LEVEL_OF_DETAIL_FIELD_NUMBER: _ClassVar[int]
+    WIND_SIMULATION_USE_ONLY_EXTERNAL_SURFACE_FOR_HOLLOW_SECTIONS_FIELD_NUMBER: _ClassVar[int]
     PARENT_LAYER_FIELD_NUMBER: _ClassVar[int]
     IS_LOCKED_BY_PARENT_LAYER_FIELD_NUMBER: _ClassVar[int]
     IS_GENERATED_FIELD_NUMBER: _ClassVar[int]
@@ -4109,6 +4115,12 @@ class MemberRepresentative(_message.Message):
     anchor_grout_body_bond_length_absolute: float
     anchor_grout_body_bond_section: int
     anchor_grout_body_bond_resistance_type: int
+    wind_simulation_enable_specific_settings: bool
+    wind_simulation_shrink_wrapping: int
+    wind_simulation_roughness_and_permeability: int
+    wind_simulation_exclude_from_wind_tunnel: bool
+    wind_simulation_member_level_of_detail: int
+    wind_simulation_use_only_external_surface_for_hollow_sections: bool
     parent_layer: int
     is_locked_by_parent_layer: bool
     is_generated: bool
@@ -4126,4 +4138,4 @@ class MemberRepresentative(_message.Message):
     concrete_longitudinal_reinforcement_span: MemberRepresentative.ConcreteLongitudinalReinforcementSpanTable
     id_for_export_import: str
     metadata_for_export_import: str
-    def __init__(self, no: _Optional[int] = ..., type: _Optional[_Union[MemberRepresentative.Type, str]] = ..., activate_load_transfer: bool = ..., is_deactivated_for_calculation: bool = ..., section_distribution_type: _Optional[_Union[MemberRepresentative.SectionDistributionType, str]] = ..., reference_type: _Optional[_Union[MemberRepresentative.ReferenceType, str]] = ..., nodes: _Optional[_Iterable[int]] = ..., node_start: _Optional[int] = ..., node_end: _Optional[int] = ..., analytical_length: _Optional[float] = ..., analytical_volume: _Optional[float] = ..., analytical_mass: _Optional[float] = ..., analytical_surface_of_coating: _Optional[float] = ..., analytical_center_of_gravity: _Optional[_Union[_common_pb2.Vector3d, _Mapping]] = ..., analytical_center_of_gravity_x: _Optional[float] = ..., analytical_center_of_gravity_y: _Optional[float] = ..., analytical_center_of_gravity_z: _Optional[float] = ..., length: _Optional[float] = ..., volume: _Optional[float] = ..., mass: _Optional[float] = ..., surface_of_coating: _Optional[float] = ..., center_of_gravity: _Optional[_Union[_common_pb2.Vector3d, _Mapping]] = ..., center_of_gravity_x: _Optional[float] = ..., center_of_gravity_y: _Optional[float] = ..., center_of_gravity_z: _Optional[float] = ..., position: _Optional[str] = ..., position_short: _Optional[str] = ..., member_representative: _Optional[int] = ..., design_properties_via_member: bool = ..., design_properties_via_parent_member_set: bool = ..., design_properties_parent_member_set: _Optional[int] = ..., design_properties_via_building_object: bool = ..., design_properties_building_object_owner: _Optional[_Union[_object_id_pb2.ObjectId, _Mapping]] = ..., design_properties_via_design_strip: bool = ..., design_properties_design_strip_owner: _Optional[int] = ..., comment: _Optional[str] = ..., is_member_weight_enabled: bool = ..., member_weight: _Optional[float] = ..., loaded_nodes: _Optional[_Iterable[int]] = ..., excluded_nodes: _Optional[_Iterable[int]] = ..., joist_type: _Optional[_Union[MemberRepresentative.JoistType, str]] = ..., joist_series: _Optional[_Union[MemberRepresentative.JoistSeries, str]] = ..., max_joist_depth: _Optional[float] = ..., member_type_rib_alignment: _Optional[_Union[MemberRepresentative.MemberTypeRibAlignment, str]] = ..., align_local_z_axis_to_local_z_axis_of_surface: bool = ..., flange_dimensions: _Optional[_Union[MemberRepresentative.FlangeDimensionsTable, _Mapping]] = ..., synchronize_width_mode: bool = ..., member_type_definable_stiffness: _Optional[int] = ..., result_beam_include_surface_cells: _Optional[_Iterable[int]] = ..., result_beam_include_all_surface_cells: bool = ..., result_beam_exclude_surface_cells: _Optional[_Iterable[int]] = ..., design_strip_integrate_stresses_and_forces: _Optional[_Union[MemberRepresentative.DesignStripIntegrateStressesAndForces, str]] = ..., design_strip_y_z: _Optional[float] = ..., design_strip_y_plus: _Optional[float] = ..., design_strip_z_plus: _Optional[float] = ..., design_strip_y_minus: _Optional[float] = ..., design_strip_z_minus: _Optional[float] = ..., design_strip_radius: _Optional[float] = ..., design_strip_include_surfaces: _Optional[_Iterable[int]] = ..., shear_wall_integrate_stresses_and_forces: _Optional[_Union[MemberRepresentative.ShearWallIntegrateStressesAndForces, str]] = ..., shear_wall_y_z: _Optional[float] = ..., shear_wall_y_plus: _Optional[float] = ..., shear_wall_z_plus: _Optional[float] = ..., shear_wall_y_minus: _Optional[float] = ..., shear_wall_z_minus: _Optional[float] = ..., shear_wall_radius: _Optional[float] = ..., shear_wall_include_surfaces: _Optional[_Iterable[int]] = ..., shear_wall_include_surface_cells: _Optional[_Iterable[int]] = ..., deep_beam_integrate_stresses_and_forces: _Optional[_Union[MemberRepresentative.DeepBeamIntegrateStressesAndForces, str]] = ..., deep_beam_y_z: _Optional[float] = ..., deep_beam_y_plus: _Optional[float] = ..., deep_beam_z_plus: _Optional[float] = ..., deep_beam_y_minus: _Optional[float] = ..., deep_beam_z_minus: _Optional[float] = ..., deep_beam_radius: _Optional[float] = ..., deep_beam_include_surfaces: _Optional[_Iterable[int]] = ..., deep_beam_include_surface_cells: _Optional[_Iterable[int]] = ..., result_line_integrate_stresses_and_forces: _Optional[_Union[MemberRepresentative.ResultLineIntegrateStressesAndForces, str]] = ..., result_line_y_z: _Optional[float] = ..., result_line_y_plus: _Optional[float] = ..., result_line_z_plus: _Optional[float] = ..., result_line_y_minus: _Optional[float] = ..., result_line_z_minus: _Optional[float] = ..., result_line_radius: _Optional[float] = ..., result_line_include_surfaces: _Optional[_Iterable[int]] = ..., result_line_include_all_surfaces: bool = ..., result_line_include_surface_cells: _Optional[_Iterable[int]] = ..., result_line_include_all_surface_cells: bool = ..., result_line_include_solids: _Optional[_Iterable[int]] = ..., result_line_include_all_solids: bool = ..., result_line_include_members: _Optional[_Iterable[int]] = ..., result_line_include_all_members: bool = ..., result_line_exclude_surfaces: _Optional[_Iterable[int]] = ..., result_line_exclude_surface_cells: _Optional[_Iterable[int]] = ..., result_line_exclude_solids: _Optional[_Iterable[int]] = ..., result_line_exclude_members: _Optional[_Iterable[int]] = ..., projected_length: _Optional[float] = ..., section_distance_from_start_is_defined_as_relative: bool = ..., section_distance_from_start_absolute: _Optional[float] = ..., section_distance_from_start_relative: _Optional[float] = ..., section_distance_from_end_is_defined_as_relative: bool = ..., section_distance_from_end_absolute: _Optional[float] = ..., section_distance_from_end_relative: _Optional[float] = ..., section_alignment: _Optional[_Union[MemberRepresentative.SectionAlignment, str]] = ..., grain_alignment: _Optional[_Union[MemberRepresentative.GrainAlignment, str]] = ..., curved_member_is_asymmetric_layout: bool = ..., curved_member_is_cantilevers: bool = ..., curved_member_cantilevers_type: _Optional[_Union[MemberRepresentative.CurvedMemberCantileversType, str]] = ..., rotation_specification_type: _Optional[_Union[MemberRepresentative.RotationSpecificationType, str]] = ..., rotation_angle: _Optional[float] = ..., rotation_help_node: _Optional[int] = ..., rotation_plane_type: _Optional[_Union[MemberRepresentative.RotationPlaneType, str]] = ..., is_rotated: bool = ..., section_start: _Optional[int] = ..., section_end: _Optional[int] = ..., section_internal: _Optional[int] = ..., section_taper_end: _Optional[int] = ..., section_taper_start: _Optional[int] = ..., section_material: _Optional[int] = ..., nodes_on_member_definition_type: _Optional[_Union[MemberRepresentative.NodesOnMemberDefinitionType, str]] = ..., nodes_on_member_assignment: _Optional[_Union[MemberRepresentative.NodesOnMemberAssignmentTable, _Mapping]] = ..., nodes_on_member_reference: _Optional[_Union[MemberRepresentative.NodesOnMemberReference, str]] = ..., nodes_on_member_start_at: _Optional[_Union[MemberRepresentative.NodesOnMemberStartAt, str]] = ..., nodes_on_member_node_distances: _Optional[str] = ..., member_hinge_start: _Optional[int] = ..., member_hinge_end: _Optional[int] = ..., member_eccentricity_start: _Optional[int] = ..., member_eccentricity_end: _Optional[int] = ..., support: _Optional[int] = ..., member_transverse_stiffener: _Optional[int] = ..., member_diagonal_brace: _Optional[int] = ..., member_openings: _Optional[int] = ..., member_nonlinearity: _Optional[int] = ..., is_active_in_compression: bool = ..., member_result_intermediate_point: _Optional[int] = ..., pile_resistance: _Optional[int] = ..., concrete_effective_lengths: _Optional[int] = ..., steel_effective_lengths: _Optional[int] = ..., timber_effective_lengths: _Optional[int] = ..., aluminum_effective_lengths: _Optional[int] = ..., concrete_shear_reinforcement_spans: _Optional[_Union[MemberRepresentative.ConcreteShearReinforcementSpansTable, _Mapping]] = ..., concrete_longitudinal_reinforcement_items: _Optional[_Union[MemberRepresentative.ConcreteLongitudinalReinforcementItemsTable, _Mapping]] = ..., concrete_cover_user_defined_enabled: bool = ..., concrete_cover_different_at_section_sides_enabled: bool = ..., concrete_cover: _Optional[float] = ..., concrete_cover_top: _Optional[float] = ..., concrete_cover_bottom: _Optional[float] = ..., concrete_cover_left: _Optional[float] = ..., concrete_cover_right: _Optional[float] = ..., concrete_cover_min: _Optional[_Iterable[float]] = ..., concrete_cover_min_top: _Optional[_Iterable[float]] = ..., concrete_cover_min_bottom: _Optional[_Iterable[float]] = ..., concrete_cover_min_left: _Optional[_Iterable[float]] = ..., concrete_cover_min_right: _Optional[_Iterable[float]] = ..., concrete_durability: _Optional[int] = ..., concrete_durability_top: _Optional[int] = ..., concrete_durability_bottom: _Optional[int] = ..., concrete_durability_left: _Optional[int] = ..., concrete_durability_right: _Optional[int] = ..., steel_boundary_conditions: _Optional[int] = ..., steel_member_local_section_reduction: _Optional[int] = ..., steel_member_transverse_weld: _Optional[int] = ..., timber_service_class: _Optional[int] = ..., timber_moisture_class: _Optional[int] = ..., timber_service_conditions: _Optional[int] = ..., timber_member_local_section_reduction: _Optional[int] = ..., aluminum_boundary_conditions: _Optional[int] = ..., aluminum_member_local_section_reduction: _Optional[int] = ..., aluminum_member_transverse_weld: _Optional[int] = ..., stress_analysis_configuration: _Optional[int] = ..., member_aluminum_design_uls_configuration: _Optional[int] = ..., member_aluminum_design_sls_configuration: _Optional[int] = ..., member_aluminum_design_fr_configuration: _Optional[int] = ..., member_concrete_design_uls_configuration: _Optional[int] = ..., member_concrete_design_sls_configuration: _Optional[int] = ..., member_concrete_design_fr_configuration: _Optional[int] = ..., member_concrete_design_seismic_configuration: _Optional[int] = ..., member_steel_design_uls_configuration: _Optional[int] = ..., member_steel_design_sls_configuration: _Optional[int] = ..., member_steel_design_fr_configuration: _Optional[int] = ..., member_steel_design_seismic_configuration: _Optional[int] = ..., member_timber_design_uls_configuration: _Optional[int] = ..., member_timber_design_sls_configuration: _Optional[int] = ..., member_timber_design_fr_configuration: _Optional[int] = ..., end_modifications_member_start_extension: _Optional[float] = ..., end_modifications_member_start_slope_y: _Optional[float] = ..., end_modifications_member_start_slope_z: _Optional[float] = ..., end_modifications_member_end_extension: _Optional[float] = ..., end_modifications_member_end_slope_y: _Optional[float] = ..., end_modifications_member_end_slope_z: _Optional[float] = ..., has_any_end_modifications: bool = ..., deflection_check_direction: _Optional[_Union[MemberRepresentative.DeflectionCheckDirection, str]] = ..., deflection_check_displacement_reference: _Optional[_Union[MemberRepresentative.DeflectionCheckDisplacementReference, str]] = ..., deflection_segments_z_axis: _Optional[_Union[MemberRepresentative.DeflectionSegmentsZAxisTable, _Mapping]] = ..., deflection_segments_y_axis: _Optional[_Union[MemberRepresentative.DeflectionSegmentsYAxisTable, _Mapping]] = ..., design_support_on_member_start: _Optional[int] = ..., design_support_on_member_end: _Optional[int] = ..., design_supports_on_internal_nodes: _Optional[_Union[MemberRepresentative.DesignSupportsOnInternalNodesTable, _Mapping]] = ..., deflection_segments_defined_length_z_axis_enabled: bool = ..., deflection_segments_defined_length_y_axis_enabled: bool = ..., member_type_spring: _Optional[int] = ..., member_type_damper_spring: _Optional[int] = ..., member_type_damper_damping_coefficient: _Optional[float] = ..., member_tendon_table: _Optional[_Union[MemberRepresentative.MemberTendonTable, _Mapping]] = ..., bim_ifc_properties: _Optional[_Union[MemberRepresentative.BimIfcPropertiesTreeTable, _Mapping]] = ..., tendon_type: _Optional[_Union[MemberRepresentative.TendonType, str]] = ..., tendon_anchor_start: _Optional[int] = ..., tendon_anchor_end: _Optional[int] = ..., has_autoconnect_member_master_objects_active: bool = ..., tendon_member_master_objects: _Optional[_Iterable[int]] = ..., tendon_member_set_master_objects: _Optional[_Iterable[int]] = ..., tendon_surface_master_objects: _Optional[_Iterable[int]] = ..., has_autoconnect_surface_master_object_active: bool = ..., anchor_unbonded_tendon_section: _Optional[int] = ..., anchor_unbonded_tendon_location: _Optional[_Union[MemberRepresentative.AnchorUnbondedTendonLocation, str]] = ..., anchor_grout_body_bond_length_is_defined_as_relative: bool = ..., anchor_grout_body_bond_length_relative: _Optional[float] = ..., anchor_grout_body_bond_length_absolute: _Optional[float] = ..., anchor_grout_body_bond_section: _Optional[int] = ..., anchor_grout_body_bond_resistance_type: _Optional[int] = ..., parent_layer: _Optional[int] = ..., is_locked_by_parent_layer: bool = ..., is_generated: bool = ..., generating_object_info: _Optional[str] = ..., user_defined_name_enabled: bool = ..., name: _Optional[str] = ..., members: _Optional[_Iterable[int]] = ..., number_of_members: _Optional[int] = ..., total_length: _Optional[float] = ..., total_volume: _Optional[float] = ..., total_mass: _Optional[float] = ..., total_surface_of_coating: _Optional[float] = ..., nodes_on_member_from_start: _Optional[_Iterable[float]] = ..., concrete_shear_reinforcement_span: _Optional[_Union[MemberRepresentative.ConcreteShearReinforcementSpanTable, _Mapping]] = ..., concrete_longitudinal_reinforcement_span: _Optional[_Union[MemberRepresentative.ConcreteLongitudinalReinforcementSpanTable, _Mapping]] = ..., id_for_export_import: _Optional[str] = ..., metadata_for_export_import: _Optional[str] = ...) -> None: ...
+    def __init__(self, no: _Optional[int] = ..., type: _Optional[_Union[MemberRepresentative.Type, str]] = ..., activate_load_transfer: bool = ..., is_deactivated_for_calculation: bool = ..., section_distribution_type: _Optional[_Union[MemberRepresentative.SectionDistributionType, str]] = ..., reference_type: _Optional[_Union[MemberRepresentative.ReferenceType, str]] = ..., nodes: _Optional[_Iterable[int]] = ..., node_start: _Optional[int] = ..., node_end: _Optional[int] = ..., analytical_length: _Optional[float] = ..., analytical_volume: _Optional[float] = ..., analytical_mass: _Optional[float] = ..., analytical_surface_of_coating: _Optional[float] = ..., analytical_center_of_gravity: _Optional[_Union[_common_pb2.Vector3d, _Mapping]] = ..., analytical_center_of_gravity_x: _Optional[float] = ..., analytical_center_of_gravity_y: _Optional[float] = ..., analytical_center_of_gravity_z: _Optional[float] = ..., length: _Optional[float] = ..., volume: _Optional[float] = ..., mass: _Optional[float] = ..., surface_of_coating: _Optional[float] = ..., center_of_gravity: _Optional[_Union[_common_pb2.Vector3d, _Mapping]] = ..., center_of_gravity_x: _Optional[float] = ..., center_of_gravity_y: _Optional[float] = ..., center_of_gravity_z: _Optional[float] = ..., position: _Optional[str] = ..., position_short: _Optional[str] = ..., member_representative: _Optional[int] = ..., design_properties_via_member: bool = ..., design_properties_via_parent_member_set: bool = ..., design_properties_parent_member_set: _Optional[int] = ..., design_properties_via_building_object: bool = ..., design_properties_building_object_owner: _Optional[_Union[_object_id_pb2.ObjectId, _Mapping]] = ..., design_properties_via_design_strip: bool = ..., design_properties_design_strip_owner: _Optional[int] = ..., comment: _Optional[str] = ..., is_member_weight_enabled: bool = ..., member_weight: _Optional[float] = ..., loaded_nodes: _Optional[_Iterable[int]] = ..., excluded_nodes: _Optional[_Iterable[int]] = ..., joist_type: _Optional[_Union[MemberRepresentative.JoistType, str]] = ..., joist_series: _Optional[_Union[MemberRepresentative.JoistSeries, str]] = ..., max_joist_depth: _Optional[float] = ..., member_type_rib_alignment: _Optional[_Union[MemberRepresentative.MemberTypeRibAlignment, str]] = ..., align_local_z_axis_to_local_z_axis_of_surface: bool = ..., flange_dimensions: _Optional[_Union[MemberRepresentative.FlangeDimensionsTable, _Mapping]] = ..., synchronize_width_mode: bool = ..., member_type_definable_stiffness: _Optional[int] = ..., result_beam_include_surface_cells: _Optional[_Iterable[int]] = ..., result_beam_include_all_surface_cells: bool = ..., result_beam_exclude_surface_cells: _Optional[_Iterable[int]] = ..., design_strip_integrate_stresses_and_forces: _Optional[_Union[MemberRepresentative.DesignStripIntegrateStressesAndForces, str]] = ..., design_strip_y_z: _Optional[float] = ..., design_strip_y_plus: _Optional[float] = ..., design_strip_z_plus: _Optional[float] = ..., design_strip_y_minus: _Optional[float] = ..., design_strip_z_minus: _Optional[float] = ..., design_strip_radius: _Optional[float] = ..., design_strip_include_surfaces: _Optional[_Iterable[int]] = ..., shear_wall_integrate_stresses_and_forces: _Optional[_Union[MemberRepresentative.ShearWallIntegrateStressesAndForces, str]] = ..., shear_wall_y_z: _Optional[float] = ..., shear_wall_y_plus: _Optional[float] = ..., shear_wall_z_plus: _Optional[float] = ..., shear_wall_y_minus: _Optional[float] = ..., shear_wall_z_minus: _Optional[float] = ..., shear_wall_radius: _Optional[float] = ..., shear_wall_include_surfaces: _Optional[_Iterable[int]] = ..., shear_wall_include_surface_cells: _Optional[_Iterable[int]] = ..., deep_beam_integrate_stresses_and_forces: _Optional[_Union[MemberRepresentative.DeepBeamIntegrateStressesAndForces, str]] = ..., deep_beam_y_z: _Optional[float] = ..., deep_beam_y_plus: _Optional[float] = ..., deep_beam_z_plus: _Optional[float] = ..., deep_beam_y_minus: _Optional[float] = ..., deep_beam_z_minus: _Optional[float] = ..., deep_beam_radius: _Optional[float] = ..., deep_beam_include_surfaces: _Optional[_Iterable[int]] = ..., deep_beam_include_surface_cells: _Optional[_Iterable[int]] = ..., result_line_integrate_stresses_and_forces: _Optional[_Union[MemberRepresentative.ResultLineIntegrateStressesAndForces, str]] = ..., result_line_y_z: _Optional[float] = ..., result_line_y_plus: _Optional[float] = ..., result_line_z_plus: _Optional[float] = ..., result_line_y_minus: _Optional[float] = ..., result_line_z_minus: _Optional[float] = ..., result_line_radius: _Optional[float] = ..., result_line_include_surfaces: _Optional[_Iterable[int]] = ..., result_line_include_all_surfaces: bool = ..., result_line_include_surface_cells: _Optional[_Iterable[int]] = ..., result_line_include_all_surface_cells: bool = ..., result_line_include_solids: _Optional[_Iterable[int]] = ..., result_line_include_all_solids: bool = ..., result_line_include_members: _Optional[_Iterable[int]] = ..., result_line_include_all_members: bool = ..., result_line_exclude_surfaces: _Optional[_Iterable[int]] = ..., result_line_exclude_surface_cells: _Optional[_Iterable[int]] = ..., result_line_exclude_solids: _Optional[_Iterable[int]] = ..., result_line_exclude_members: _Optional[_Iterable[int]] = ..., projected_length: _Optional[float] = ..., section_distance_from_start_is_defined_as_relative: bool = ..., section_distance_from_start_absolute: _Optional[float] = ..., section_distance_from_start_relative: _Optional[float] = ..., section_distance_from_end_is_defined_as_relative: bool = ..., section_distance_from_end_absolute: _Optional[float] = ..., section_distance_from_end_relative: _Optional[float] = ..., section_alignment: _Optional[_Union[MemberRepresentative.SectionAlignment, str]] = ..., grain_alignment: _Optional[_Union[MemberRepresentative.GrainAlignment, str]] = ..., curved_member_is_asymmetric_layout: bool = ..., curved_member_is_cantilevers: bool = ..., curved_member_cantilevers_type: _Optional[_Union[MemberRepresentative.CurvedMemberCantileversType, str]] = ..., rotation_specification_type: _Optional[_Union[MemberRepresentative.RotationSpecificationType, str]] = ..., rotation_angle: _Optional[float] = ..., rotation_help_node: _Optional[int] = ..., rotation_plane_type: _Optional[_Union[MemberRepresentative.RotationPlaneType, str]] = ..., is_rotated: bool = ..., section_start: _Optional[int] = ..., section_end: _Optional[int] = ..., section_internal: _Optional[int] = ..., section_taper_end: _Optional[int] = ..., section_taper_start: _Optional[int] = ..., section_material: _Optional[int] = ..., nodes_on_member_definition_type: _Optional[_Union[MemberRepresentative.NodesOnMemberDefinitionType, str]] = ..., nodes_on_member_assignment: _Optional[_Union[MemberRepresentative.NodesOnMemberAssignmentTable, _Mapping]] = ..., nodes_on_member_reference: _Optional[_Union[MemberRepresentative.NodesOnMemberReference, str]] = ..., nodes_on_member_start_at: _Optional[_Union[MemberRepresentative.NodesOnMemberStartAt, str]] = ..., nodes_on_member_node_distances: _Optional[str] = ..., member_hinge_start: _Optional[int] = ..., member_hinge_end: _Optional[int] = ..., member_eccentricity_start: _Optional[int] = ..., member_eccentricity_end: _Optional[int] = ..., support: _Optional[int] = ..., member_transverse_stiffener: _Optional[int] = ..., member_diagonal_brace: _Optional[int] = ..., member_openings: _Optional[int] = ..., member_nonlinearity: _Optional[int] = ..., is_active_in_compression: bool = ..., member_result_intermediate_point: _Optional[int] = ..., pile_resistance: _Optional[int] = ..., concrete_effective_lengths: _Optional[int] = ..., steel_effective_lengths: _Optional[int] = ..., timber_effective_lengths: _Optional[int] = ..., aluminum_effective_lengths: _Optional[int] = ..., concrete_shear_reinforcement_spans: _Optional[_Union[MemberRepresentative.ConcreteShearReinforcementSpansTable, _Mapping]] = ..., concrete_longitudinal_reinforcement_items: _Optional[_Union[MemberRepresentative.ConcreteLongitudinalReinforcementItemsTable, _Mapping]] = ..., concrete_cover_user_defined_enabled: bool = ..., concrete_cover_different_at_section_sides_enabled: bool = ..., concrete_cover: _Optional[float] = ..., concrete_cover_top: _Optional[float] = ..., concrete_cover_bottom: _Optional[float] = ..., concrete_cover_left: _Optional[float] = ..., concrete_cover_right: _Optional[float] = ..., concrete_cover_min: _Optional[_Iterable[float]] = ..., concrete_cover_min_top: _Optional[_Iterable[float]] = ..., concrete_cover_min_bottom: _Optional[_Iterable[float]] = ..., concrete_cover_min_left: _Optional[_Iterable[float]] = ..., concrete_cover_min_right: _Optional[_Iterable[float]] = ..., concrete_durability: _Optional[int] = ..., concrete_durability_top: _Optional[int] = ..., concrete_durability_bottom: _Optional[int] = ..., concrete_durability_left: _Optional[int] = ..., concrete_durability_right: _Optional[int] = ..., steel_boundary_conditions: _Optional[int] = ..., steel_member_local_section_reduction: _Optional[int] = ..., steel_member_transverse_weld: _Optional[int] = ..., timber_service_class: _Optional[int] = ..., timber_moisture_class: _Optional[int] = ..., timber_service_conditions: _Optional[int] = ..., timber_member_local_section_reduction: _Optional[int] = ..., aluminum_boundary_conditions: _Optional[int] = ..., aluminum_member_local_section_reduction: _Optional[int] = ..., aluminum_member_transverse_weld: _Optional[int] = ..., stress_analysis_configuration: _Optional[int] = ..., member_aluminum_design_uls_configuration: _Optional[int] = ..., member_aluminum_design_sls_configuration: _Optional[int] = ..., member_aluminum_design_fr_configuration: _Optional[int] = ..., member_concrete_design_uls_configuration: _Optional[int] = ..., member_concrete_design_sls_configuration: _Optional[int] = ..., member_concrete_design_fr_configuration: _Optional[int] = ..., member_concrete_design_seismic_configuration: _Optional[int] = ..., member_steel_design_uls_configuration: _Optional[int] = ..., member_steel_design_sls_configuration: _Optional[int] = ..., member_steel_design_fr_configuration: _Optional[int] = ..., member_steel_design_seismic_configuration: _Optional[int] = ..., member_timber_design_uls_configuration: _Optional[int] = ..., member_timber_design_sls_configuration: _Optional[int] = ..., member_timber_design_fr_configuration: _Optional[int] = ..., end_modifications_member_start_extension: _Optional[float] = ..., end_modifications_member_start_slope_y: _Optional[float] = ..., end_modifications_member_start_slope_z: _Optional[float] = ..., end_modifications_member_end_extension: _Optional[float] = ..., end_modifications_member_end_slope_y: _Optional[float] = ..., end_modifications_member_end_slope_z: _Optional[float] = ..., has_any_end_modifications: bool = ..., deflection_check_direction: _Optional[_Union[MemberRepresentative.DeflectionCheckDirection, str]] = ..., deflection_check_displacement_reference: _Optional[_Union[MemberRepresentative.DeflectionCheckDisplacementReference, str]] = ..., deflection_segments_z_axis: _Optional[_Union[MemberRepresentative.DeflectionSegmentsZAxisTable, _Mapping]] = ..., deflection_segments_y_axis: _Optional[_Union[MemberRepresentative.DeflectionSegmentsYAxisTable, _Mapping]] = ..., design_support_on_member_start: _Optional[int] = ..., design_support_on_member_end: _Optional[int] = ..., design_supports_on_internal_nodes: _Optional[_Union[MemberRepresentative.DesignSupportsOnInternalNodesTable, _Mapping]] = ..., deflection_segments_defined_length_z_axis_enabled: bool = ..., deflection_segments_defined_length_y_axis_enabled: bool = ..., member_type_spring: _Optional[int] = ..., member_type_damper_spring: _Optional[int] = ..., member_type_damper_damping_coefficient: _Optional[float] = ..., member_tendon_table: _Optional[_Union[MemberRepresentative.MemberTendonTable, _Mapping]] = ..., bim_ifc_properties: _Optional[_Union[MemberRepresentative.BimIfcPropertiesTreeTable, _Mapping]] = ..., tendon_type: _Optional[_Union[MemberRepresentative.TendonType, str]] = ..., tendon_anchor_start: _Optional[int] = ..., tendon_anchor_end: _Optional[int] = ..., has_autoconnect_member_master_objects_active: bool = ..., tendon_member_master_objects: _Optional[_Iterable[int]] = ..., tendon_member_set_master_objects: _Optional[_Iterable[int]] = ..., tendon_surface_master_objects: _Optional[_Iterable[int]] = ..., has_autoconnect_surface_master_object_active: bool = ..., anchor_unbonded_tendon_section: _Optional[int] = ..., anchor_unbonded_tendon_location: _Optional[_Union[MemberRepresentative.AnchorUnbondedTendonLocation, str]] = ..., anchor_grout_body_bond_length_is_defined_as_relative: bool = ..., anchor_grout_body_bond_length_relative: _Optional[float] = ..., anchor_grout_body_bond_length_absolute: _Optional[float] = ..., anchor_grout_body_bond_section: _Optional[int] = ..., anchor_grout_body_bond_resistance_type: _Optional[int] = ..., wind_simulation_enable_specific_settings: bool = ..., wind_simulation_shrink_wrapping: _Optional[int] = ..., wind_simulation_roughness_and_permeability: _Optional[int] = ..., wind_simulation_exclude_from_wind_tunnel: bool = ..., wind_simulation_member_level_of_detail: _Optional[int] = ..., wind_simulation_use_only_external_surface_for_hollow_sections: bool = ..., parent_layer: _Optional[int] = ..., is_locked_by_parent_layer: bool = ..., is_generated: bool = ..., generating_object_info: _Optional[str] = ..., user_defined_name_enabled: bool = ..., name: _Optional[str] = ..., members: _Optional[_Iterable[int]] = ..., number_of_members: _Optional[int] = ..., total_length: _Optional[float] = ..., total_volume: _Optional[float] = ..., total_mass: _Optional[float] = ..., total_surface_of_coating: _Optional[float] = ..., nodes_on_member_from_start: _Optional[_Iterable[float]] = ..., concrete_shear_reinforcement_span: _Optional[_Union[MemberRepresentative.ConcreteShearReinforcementSpanTable, _Mapping]] = ..., concrete_longitudinal_reinforcement_span: _Optional[_Union[MemberRepresentative.ConcreteLongitudinalReinforcementSpanTable, _Mapping]] = ..., id_for_export_import: _Optional[str] = ..., metadata_for_export_import: _Optional[str] = ...) -> None: ...