dlubal.api 2.12.11__py3-none-any.whl

examples/rfem/steel_hall.py

@@ -0,0 +1,175 @@
+"""
+Parametric steel hall example using manipulation functions.
+"""
+
+from dlubal.api import rfem, common
+
+# Editable parameters (SI units)
+FRAME_SPACING = 5.0
+FRAME_COUNT = 5
+FRAME_WIDTH = 13.0
+FRAME_HEIGHT_MIN = 4.5
+FRAME_HEIGHT_MAX = 6.0
+RAFTER_SLOPE_LENGTH = 0.2
+RAFTER_FIELDS = 2
+
+STEEL_GRADE = "S235 | EN 10025-2:2004-11"
+SECTION_COLUMN = "IPE 300"
+SECTION_RAFTER = "I 0.3/0.11/0.006/0.014/0/0/H"
+SECTION_RAFTER_TAPPERED = "I 0.6/0.11/0.006/0.014/0/0/H"
+SECTION_PURLINS = "CHC 139.7x8.0"
+SECTION_BRACING = "R 20"
+
+
+def build_frame() -> list:
+
+    inf = float('inf')
+
+    frame_objs = [
+
+        # Material
+        rfem.structure_core.Material(no=1, name=STEEL_GRADE),
+
+        # Cross-section
+        rfem.structure_core.CrossSection(no=1, name=SECTION_COLUMN, material=1),
+        rfem.structure_core.CrossSection(no=2, name=SECTION_RAFTER, material=1),
+        rfem.structure_core.CrossSection(no=3, name=SECTION_RAFTER_TAPPERED, material=1),
+
+        # Nodes
+        rfem.structure_core.Node(no=1),
+        rfem.structure_core.Node(no=2, coordinate_3=-FRAME_HEIGHT_MIN),
+        rfem.structure_core.Node(no=3, coordinate_1=FRAME_WIDTH/2, coordinate_3=-FRAME_HEIGHT_MAX),
+        rfem.structure_core.Node(no=4, coordinate_1=FRAME_WIDTH, coordinate_3=-FRAME_HEIGHT_MIN),
+        rfem.structure_core.Node(no=5, coordinate_1=FRAME_WIDTH),
+
+        # Lines
+        rfem.structure_core.Line(no=1, definition_nodes=[1, 2]),
+        rfem.structure_core.Line(no=2, definition_nodes=[2, 3]),
+        rfem.structure_core.Line(no=3, definition_nodes=[3, 4]),
+        rfem.structure_core.Line(no=4, definition_nodes=[4, 5]),
+
+        # Members
+        rfem.structure_core.Member(
+            no=1, line=1, cross_section_start=1, type=rfem.structure_core.Member.TYPE_BEAM
+        ),
+        rfem.structure_core.Member(
+            no=2, line=2, cross_section_start=3, cross_section_end=2,
+            type=rfem.structure_core.Member.TYPE_BEAM,
+            cross_section_distribution_type=rfem.structure_core.Member.CROSS_SECTION_DISTRIBUTION_TYPE_TAPERED_AT_START_OF_MEMBER,
+            cross_section_distance_from_start_is_defined_as_relative=True,
+            section_distance_from_start_relative=RAFTER_SLOPE_LENGTH
+        ),
+        rfem.structure_core.Member(
+            no=3, line=3, cross_section_start=2, cross_section_end=3,
+            type=rfem.structure_core.Member.TYPE_BEAM,
+            cross_section_distribution_type=rfem.structure_core.Member.CROSS_SECTION_DISTRIBUTION_TYPE_TAPERED_AT_END_OF_MEMBER,
+            cross_section_distance_from_end_is_defined_as_relative=True,
+            cross_section_distance_from_end_relative=RAFTER_SLOPE_LENGTH
+        ),
+        rfem.structure_core.Member(
+            no=4, line=4, cross_section_start=1, type=rfem.structure_core.Member.TYPE_BEAM
+        ),
+
+        # Nodal support (hinge)
+        rfem.types_for_nodes.NodalSupport(
+            no=1,
+            nodes=[1, 5],
+            spring_x=inf,
+            spring_y=inf,
+            spring_z=inf,
+            rotational_restraint_z=inf
+        ),
+
+    ]
+
+    # Rafter internal nodes for purlins connection
+    node_no = 8
+    for member_ref in (2, 3):
+        for j in range(1, RAFTER_FIELDS):
+            frame_objs.append(
+                rfem.structure_core.Node(
+                    no=node_no,
+                    type=rfem.structure_core.Node.TYPE_ON_MEMBER,
+                    on_member_reference_member=member_ref,
+                    distance_from_start_relative=j / RAFTER_FIELDS,
+                )
+            )
+            node_no += 1
+
+
+    return frame_objs
+
+
+def build_purlins() -> list:
+
+    nodes_per_frame = 7 + 2* (RAFTER_FIELDS-1)
+    line_no = 4 * FRAME_COUNT
+
+    purlin_objs = [
+        rfem.structure_core.CrossSection(no=4, name=SECTION_PURLINS, material=1),
+        rfem.structure_core.Line(no=line_no+1, definition_nodes=[2, nodes_per_frame+2]),
+        rfem.structure_core.Line(no=line_no+2, definition_nodes=[3, nodes_per_frame+3]),
+        rfem.structure_core.Line(no=line_no+3, definition_nodes=[4, nodes_per_frame+4]),
+        rfem.structure_core.Member(
+            no=line_no+1, line=line_no+1, cross_section_start=4,
+            type=rfem.structure_core.Member.TYPE_TRUSS
+        ),
+        rfem.structure_core.Member(
+            no=line_no+2, line=line_no+2, cross_section_start=4,
+            type=rfem.structure_core.Member.TYPE_TRUSS
+        ),
+        rfem.structure_core.Member(
+            no=line_no+3, line=line_no+3, cross_section_start=4,
+            type=rfem.structure_core.Member.TYPE_TRUSS
+        ),
+    ]
+
+    line_no += 3
+
+    for j in range(1, RAFTER_FIELDS*2 - 1):
+        purlin_objs.extend([
+            rfem.structure_core.Line(no=line_no+1, definition_nodes=[7+j, nodes_per_frame+7+j]),
+            rfem.structure_core.Member(
+                no=line_no+1, line=line_no+1, cross_section_start=4,
+                type=rfem.structure_core.Member.TYPE_TRUSS
+            )
+        ])
+        line_no += 1
+
+    return purlin_objs
+
+
+# --- Main function to execute ---
+with rfem.Application() as rfem_app:
+
+    # Close all existing models and create a new empty one
+    rfem_app.close_all_models(save_changes=False)
+    model_id = rfem_app.create_model(name='steel_hall_parametric')
+    rfem_app.delete_all_objects()
+
+    # Build the frame
+    frame_objs = build_frame()
+    rfem_app.create_object_list(objs=frame_objs)
+
+    # Copy the frame by vector
+    rfem_app.move_objects(
+        objects=frame_objs,
+        create_copy=True,
+        number_of_steps=FRAME_COUNT-1,
+        direction_through=rfem.manipulation.DIRECTION_THROUGH_DISPLACEMENT_VECTOR,
+        displacement_vector=common.Vector3d(x=0.0, y=FRAME_SPACING, z=0.0)
+    )
+
+    # Build purlins
+    purlin_objs = build_purlins()
+    rfem_app.create_object_list(objs=purlin_objs)
+
+    # Copy the purlins parallel to axis
+    rfem_app.move_objects(
+        objects=purlin_objs,
+        create_copy=True,
+        number_of_steps=FRAME_COUNT-2,
+        direction_through=rfem.manipulation.DIRECTION_THROUGH_PARALLEL_TO_AXIS,
+        axis=rfem.manipulation.COORDINATE_AXIS_Y,
+        spacing=FRAME_SPACING
+    )