dlubal.api 0.1.293714a1__py3-none-any.whl → 2.12.2__py3-none-any.whl

dlubal/api/rfem/guide_objects/dimension_pb2.pyi

@@ -7,101 +7,224 @@ from typing import ClassVar as _ClassVar, Iterable as _Iterable, Mapping as _Map
 
 DESCRIPTOR: _descriptor.FileDescriptor
 
-class DimensionType(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
-    __slots__ = ()
-    DIMENSION_TYPE_UNKNOWN: _ClassVar[DimensionType]
-    DIMENSION_TYPE_DIMENSION_TYPE_ANGULAR: _ClassVar[DimensionType]
-    DIMENSION_TYPE_DIMENSION_TYPE_ARC_LENGTH: _ClassVar[DimensionType]
-    DIMENSION_TYPE_DIMENSION_TYPE_DIAMETER: _ClassVar[DimensionType]
-    DIMENSION_TYPE_DIMENSION_TYPE_ELEVATION: _ClassVar[DimensionType]
-    DIMENSION_TYPE_DIMENSION_TYPE_LINEAR: _ClassVar[DimensionType]
-    DIMENSION_TYPE_DIMENSION_TYPE_RADIUS: _ClassVar[DimensionType]
-    DIMENSION_TYPE_DIMENSION_TYPE_SLOPE: _ClassVar[DimensionType]
-
-class DimensionCustomVerticalPosition(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
-    __slots__ = ()
-    DIMENSION_CUSTOM_VERTICAL_POSITION_CENTER: _ClassVar[DimensionCustomVerticalPosition]
-    DIMENSION_CUSTOM_VERTICAL_POSITION_ABOVE: _ClassVar[DimensionCustomVerticalPosition]
-    DIMENSION_CUSTOM_VERTICAL_POSITION_UNDER: _ClassVar[DimensionCustomVerticalPosition]
-
-class DimensionCustomHorizontalPosition(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
-    __slots__ = ()
-    DIMENSION_CUSTOM_HORIZONTAL_POSITION_CENTER: _ClassVar[DimensionCustomHorizontalPosition]
-    DIMENSION_CUSTOM_HORIZONTAL_POSITION_LEFT: _ClassVar[DimensionCustomHorizontalPosition]
-    DIMENSION_CUSTOM_HORIZONTAL_POSITION_RIGHT: _ClassVar[DimensionCustomHorizontalPosition]
-
-class DimensionLinearReference(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
-    __slots__ = ()
-    DIMENSION_LINEAR_REFERENCE_LENGTH: _ClassVar[DimensionLinearReference]
-    DIMENSION_LINEAR_REFERENCE_PROJECTION_IN_X: _ClassVar[DimensionLinearReference]
-    DIMENSION_LINEAR_REFERENCE_PROJECTION_IN_Y: _ClassVar[DimensionLinearReference]
-    DIMENSION_LINEAR_REFERENCE_PROJECTION_IN_Z: _ClassVar[DimensionLinearReference]
-
-class DimensionLinearPlane(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
-    __slots__ = ()
-    DIMENSION_LINEAR_PLANE_FIRST: _ClassVar[DimensionLinearPlane]
-    DIMENSION_LINEAR_PLANE_SECOND: _ClassVar[DimensionLinearPlane]
-
-class DimensionAngularQuadrant(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
-    __slots__ = ()
-    DIMENSION_ANGULAR_QUADRANT_POSITIVE: _ClassVar[DimensionAngularQuadrant]
-    DIMENSION_ANGULAR_QUADRANT_LEFT: _ClassVar[DimensionAngularQuadrant]
-    DIMENSION_ANGULAR_QUADRANT_NEGATIVE: _ClassVar[DimensionAngularQuadrant]
-    DIMENSION_ANGULAR_QUADRANT_RIGHT: _ClassVar[DimensionAngularQuadrant]
-
-class DimensionSlopePlane(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
-    __slots__ = ()
-    DIMENSION_SLOPE_PLANE_XY: _ClassVar[DimensionSlopePlane]
-    DIMENSION_SLOPE_PLANE_XZ: _ClassVar[DimensionSlopePlane]
-    DIMENSION_SLOPE_PLANE_YZ: _ClassVar[DimensionSlopePlane]
-
-class DimensionSlopeDirection(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
-    __slots__ = ()
-    DIMENSION_SLOPE_DIRECTION_UPWARD: _ClassVar[DimensionSlopeDirection]
-    DIMENSION_SLOPE_DIRECTION_DOWNWARD: _ClassVar[DimensionSlopeDirection]
-
-class DimensionElevationReferenceObjectType(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
-    __slots__ = ()
-    DIMENSION_ELEVATION_REFERENCE_OBJECT_TYPE_SURFACE: _ClassVar[DimensionElevationReferenceObjectType]
-    DIMENSION_ELEVATION_REFERENCE_OBJECT_TYPE_CONTROL_POINT: _ClassVar[DimensionElevationReferenceObjectType]
-    DIMENSION_ELEVATION_REFERENCE_OBJECT_TYPE_NODE: _ClassVar[DimensionElevationReferenceObjectType]
-    DIMENSION_ELEVATION_REFERENCE_OBJECT_TYPE_POINT: _ClassVar[DimensionElevationReferenceObjectType]
-DIMENSION_TYPE_UNKNOWN: DimensionType
-DIMENSION_TYPE_DIMENSION_TYPE_ANGULAR: DimensionType
-DIMENSION_TYPE_DIMENSION_TYPE_ARC_LENGTH: DimensionType
-DIMENSION_TYPE_DIMENSION_TYPE_DIAMETER: DimensionType
-DIMENSION_TYPE_DIMENSION_TYPE_ELEVATION: DimensionType
-DIMENSION_TYPE_DIMENSION_TYPE_LINEAR: DimensionType
-DIMENSION_TYPE_DIMENSION_TYPE_RADIUS: DimensionType
-DIMENSION_TYPE_DIMENSION_TYPE_SLOPE: DimensionType
-DIMENSION_CUSTOM_VERTICAL_POSITION_CENTER: DimensionCustomVerticalPosition
-DIMENSION_CUSTOM_VERTICAL_POSITION_ABOVE: DimensionCustomVerticalPosition
-DIMENSION_CUSTOM_VERTICAL_POSITION_UNDER: DimensionCustomVerticalPosition
-DIMENSION_CUSTOM_HORIZONTAL_POSITION_CENTER: DimensionCustomHorizontalPosition
-DIMENSION_CUSTOM_HORIZONTAL_POSITION_LEFT: DimensionCustomHorizontalPosition
-DIMENSION_CUSTOM_HORIZONTAL_POSITION_RIGHT: DimensionCustomHorizontalPosition
-DIMENSION_LINEAR_REFERENCE_LENGTH: DimensionLinearReference
-DIMENSION_LINEAR_REFERENCE_PROJECTION_IN_X: DimensionLinearReference
-DIMENSION_LINEAR_REFERENCE_PROJECTION_IN_Y: DimensionLinearReference
-DIMENSION_LINEAR_REFERENCE_PROJECTION_IN_Z: DimensionLinearReference
-DIMENSION_LINEAR_PLANE_FIRST: DimensionLinearPlane
-DIMENSION_LINEAR_PLANE_SECOND: DimensionLinearPlane
-DIMENSION_ANGULAR_QUADRANT_POSITIVE: DimensionAngularQuadrant
-DIMENSION_ANGULAR_QUADRANT_LEFT: DimensionAngularQuadrant
-DIMENSION_ANGULAR_QUADRANT_NEGATIVE: DimensionAngularQuadrant
-DIMENSION_ANGULAR_QUADRANT_RIGHT: DimensionAngularQuadrant
-DIMENSION_SLOPE_PLANE_XY: DimensionSlopePlane
-DIMENSION_SLOPE_PLANE_XZ: DimensionSlopePlane
-DIMENSION_SLOPE_PLANE_YZ: DimensionSlopePlane
-DIMENSION_SLOPE_DIRECTION_UPWARD: DimensionSlopeDirection
-DIMENSION_SLOPE_DIRECTION_DOWNWARD: DimensionSlopeDirection
-DIMENSION_ELEVATION_REFERENCE_OBJECT_TYPE_SURFACE: DimensionElevationReferenceObjectType
-DIMENSION_ELEVATION_REFERENCE_OBJECT_TYPE_CONTROL_POINT: DimensionElevationReferenceObjectType
-DIMENSION_ELEVATION_REFERENCE_OBJECT_TYPE_NODE: DimensionElevationReferenceObjectType
-DIMENSION_ELEVATION_REFERENCE_OBJECT_TYPE_POINT: DimensionElevationReferenceObjectType
-
 class Dimension(_message.Message):
-    __slots__ = ("no", "type", "user_defined_name_enabled", "name", "display_properties_index", "dimension_line_offset", "is_custom_vertical_position", "custom_vertical_position", "is_custom_horizontal_position", "custom_horizontal_position", "symbol", "comment", "measured_length", "measured_lengths", "measured_angle", "measured_angles", "measured_slope", "is_global_dimension_line_offset", "linear_coordinate_system", "linear_reference", "linear_plane", "linear_global_dimension_line_offset", "linear_global_dimension_line_offset_x", "linear_global_dimension_line_offset_y", "linear_global_dimension_line_offset_z", "linear_reference_table", "arc_length_reference_line", "arc_length_reference_table", "arc_length_angle_greater_than_180", "angular_reference_table", "angular_quadrant", "angular_angle_greater_than_180", "radius_diameter_reference_line", "radius_diameter_is_target_point", "radius_diameter_target_point_coordinates", "radius_diameter_target_point_coordinate_x", "radius_diameter_target_point_coordinate_y", "radius_diameter_target_point_coordinate_z", "radius_diameter_position_on_line", "slope_coordinate_system", "slope_plane", "slope_reference_line", "slope_direction", "slope_refer_distance_from_line_end", "slope_position_is_relative", "slope_position_absolute", "slope_position_relative", "elevation_reference_object_type", "elevation_reference_surface", "elevation_reference_node", "elevation_reference_control_point", "elevation_reference_point_coordinates", "elevation_reference_point_coordinate_x", "elevation_reference_point_coordinate_y", "elevation_reference_point_coordinate_z", "elevation_distance_from_picked_position", "elevation_rotation_around_z", "elevation_reference_level_height", "elevation_is_altitude", "elevation_altitude", "is_generated", "generating_object_info", "id_for_export_import", "metadata_for_export_import")
+    __slots__ = ("no", "type", "user_defined_name_enabled", "name", "display_properties_index", "dimension_line_offset", "is_custom_vertical_position", "custom_vertical_position", "is_custom_horizontal_position", "custom_horizontal_position", "symbol", "comment", "measured_length", "measured_lengths", "measured_angle", "measured_angles", "measured_slope", "is_global_dimension_line_offset", "linear_coordinate_system", "linear_reference", "linear_plane", "linear_global_dimension_line_offset_x", "linear_global_dimension_line_offset_y", "linear_global_dimension_line_offset_z", "linear_global_dimension_line_offset", "linear_reference_table", "arc_length_reference_line", "arc_length_reference_table", "arc_length_angle_greater_than_180", "angular_reference_table", "angular_quadrant", "angular_angle_greater_than_180", "radius_diameter_reference_line", "radius_diameter_is_target_point", "radius_diameter_target_point_coordinate_x", "radius_diameter_target_point_coordinate_y", "radius_diameter_target_point_coordinate_z", "radius_diameter_target_point_coordinates", "radius_diameter_position_on_line", "slope_coordinate_system", "slope_plane", "slope_reference_type", "slope_reference_line", "slope_first_point_coordinate_x", "slope_first_point_coordinate_y", "slope_first_point_coordinate_z", "slope_first_point_coordinates", "slope_second_point_coordinate_x", "slope_second_point_coordinate_y", "slope_second_point_coordinate_z", "slope_second_point_coordinates", "slope_direction", "slope_refer_distance_from_line_end", "slope_position_absolute", "slope_position_relative", "slope_position_is_relative", "elevation_reference_object_type", "elevation_reference_surface", "elevation_reference_node", "elevation_reference_control_point", "elevation_reference_point_coordinate_x", "elevation_reference_point_coordinate_y", "elevation_reference_point_coordinate_z", "elevation_reference_point_coordinates", "elevation_distance_from_picked_position", "elevation_rotation_around_z", "elevation_reference_level_height", "elevation_is_altitude", "elevation_altitude", "parent_layer", "is_locked_by_parent_layer", "is_generated", "generating_object_info", "is_detail_dimension", "detail_dimension_parent_object", "id_for_export_import", "metadata_for_export_import")
+    class Type(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
+        __slots__ = ()
+        TYPE_UNKNOWN: _ClassVar[Dimension.Type]
+        TYPE_ANGULAR: _ClassVar[Dimension.Type]
+        TYPE_ARC_LENGTH: _ClassVar[Dimension.Type]
+        TYPE_DIAMETER: _ClassVar[Dimension.Type]
+        TYPE_ELEVATION: _ClassVar[Dimension.Type]
+        TYPE_LINEAR: _ClassVar[Dimension.Type]
+        TYPE_RADIUS: _ClassVar[Dimension.Type]
+        TYPE_SLOPE: _ClassVar[Dimension.Type]
+    TYPE_UNKNOWN: Dimension.Type
+    TYPE_ANGULAR: Dimension.Type
+    TYPE_ARC_LENGTH: Dimension.Type
+    TYPE_DIAMETER: Dimension.Type
+    TYPE_ELEVATION: Dimension.Type
+    TYPE_LINEAR: Dimension.Type
+    TYPE_RADIUS: Dimension.Type
+    TYPE_SLOPE: Dimension.Type
+    class CustomVerticalPosition(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
+        __slots__ = ()
+        CUSTOM_VERTICAL_POSITION_CENTER: _ClassVar[Dimension.CustomVerticalPosition]
+        CUSTOM_VERTICAL_POSITION_ABOVE: _ClassVar[Dimension.CustomVerticalPosition]
+        CUSTOM_VERTICAL_POSITION_UNDER: _ClassVar[Dimension.CustomVerticalPosition]
+    CUSTOM_VERTICAL_POSITION_CENTER: Dimension.CustomVerticalPosition
+    CUSTOM_VERTICAL_POSITION_ABOVE: Dimension.CustomVerticalPosition
+    CUSTOM_VERTICAL_POSITION_UNDER: Dimension.CustomVerticalPosition
+    class CustomHorizontalPosition(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
+        __slots__ = ()
+        CUSTOM_HORIZONTAL_POSITION_CENTER: _ClassVar[Dimension.CustomHorizontalPosition]
+        CUSTOM_HORIZONTAL_POSITION_LEFT: _ClassVar[Dimension.CustomHorizontalPosition]
+        CUSTOM_HORIZONTAL_POSITION_RIGHT: _ClassVar[Dimension.CustomHorizontalPosition]
+    CUSTOM_HORIZONTAL_POSITION_CENTER: Dimension.CustomHorizontalPosition
+    CUSTOM_HORIZONTAL_POSITION_LEFT: Dimension.CustomHorizontalPosition
+    CUSTOM_HORIZONTAL_POSITION_RIGHT: Dimension.CustomHorizontalPosition
+    class LinearReference(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
+        __slots__ = ()
+        LINEAR_REFERENCE_LENGTH: _ClassVar[Dimension.LinearReference]
+        LINEAR_REFERENCE_PROJECTION_IN_X: _ClassVar[Dimension.LinearReference]
+        LINEAR_REFERENCE_PROJECTION_IN_Y: _ClassVar[Dimension.LinearReference]
+        LINEAR_REFERENCE_PROJECTION_IN_Z: _ClassVar[Dimension.LinearReference]
+    LINEAR_REFERENCE_LENGTH: Dimension.LinearReference
+    LINEAR_REFERENCE_PROJECTION_IN_X: Dimension.LinearReference
+    LINEAR_REFERENCE_PROJECTION_IN_Y: Dimension.LinearReference
+    LINEAR_REFERENCE_PROJECTION_IN_Z: Dimension.LinearReference
+    class LinearPlane(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
+        __slots__ = ()
+        LINEAR_PLANE_FIRST: _ClassVar[Dimension.LinearPlane]
+        LINEAR_PLANE_SECOND: _ClassVar[Dimension.LinearPlane]
+    LINEAR_PLANE_FIRST: Dimension.LinearPlane
+    LINEAR_PLANE_SECOND: Dimension.LinearPlane
+    class AngularQuadrant(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
+        __slots__ = ()
+        ANGULAR_QUADRANT_POSITIVE: _ClassVar[Dimension.AngularQuadrant]
+        ANGULAR_QUADRANT_LEFT: _ClassVar[Dimension.AngularQuadrant]
+        ANGULAR_QUADRANT_NEGATIVE: _ClassVar[Dimension.AngularQuadrant]
+        ANGULAR_QUADRANT_RIGHT: _ClassVar[Dimension.AngularQuadrant]
+    ANGULAR_QUADRANT_POSITIVE: Dimension.AngularQuadrant
+    ANGULAR_QUADRANT_LEFT: Dimension.AngularQuadrant
+    ANGULAR_QUADRANT_NEGATIVE: Dimension.AngularQuadrant
+    ANGULAR_QUADRANT_RIGHT: Dimension.AngularQuadrant
+    class SlopePlane(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
+        __slots__ = ()
+        SLOPE_PLANE_XY: _ClassVar[Dimension.SlopePlane]
+        SLOPE_PLANE_XZ: _ClassVar[Dimension.SlopePlane]
+        SLOPE_PLANE_YZ: _ClassVar[Dimension.SlopePlane]
+    SLOPE_PLANE_XY: Dimension.SlopePlane
+    SLOPE_PLANE_XZ: Dimension.SlopePlane
+    SLOPE_PLANE_YZ: Dimension.SlopePlane
+    class SlopeReferenceType(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
+        __slots__ = ()
+        SLOPE_REFERENCE_TYPE_LINE_OR_MEMBER: _ClassVar[Dimension.SlopeReferenceType]
+        SLOPE_REFERENCE_TYPE_TWO_POINTS: _ClassVar[Dimension.SlopeReferenceType]
+    SLOPE_REFERENCE_TYPE_LINE_OR_MEMBER: Dimension.SlopeReferenceType
+    SLOPE_REFERENCE_TYPE_TWO_POINTS: Dimension.SlopeReferenceType
+    class SlopeDirection(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
+        __slots__ = ()
+        SLOPE_DIRECTION_UPWARD: _ClassVar[Dimension.SlopeDirection]
+        SLOPE_DIRECTION_DOWNWARD: _ClassVar[Dimension.SlopeDirection]
+    SLOPE_DIRECTION_UPWARD: Dimension.SlopeDirection
+    SLOPE_DIRECTION_DOWNWARD: Dimension.SlopeDirection
+    class ElevationReferenceObjectType(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
+        __slots__ = ()
+        ELEVATION_REFERENCE_OBJECT_TYPE_SURFACE: _ClassVar[Dimension.ElevationReferenceObjectType]
+        ELEVATION_REFERENCE_OBJECT_TYPE_CONTROL_POINT: _ClassVar[Dimension.ElevationReferenceObjectType]
+        ELEVATION_REFERENCE_OBJECT_TYPE_NODE: _ClassVar[Dimension.ElevationReferenceObjectType]
+        ELEVATION_REFERENCE_OBJECT_TYPE_POINT: _ClassVar[Dimension.ElevationReferenceObjectType]
+    ELEVATION_REFERENCE_OBJECT_TYPE_SURFACE: Dimension.ElevationReferenceObjectType
+    ELEVATION_REFERENCE_OBJECT_TYPE_CONTROL_POINT: Dimension.ElevationReferenceObjectType
+    ELEVATION_REFERENCE_OBJECT_TYPE_NODE: Dimension.ElevationReferenceObjectType
+    ELEVATION_REFERENCE_OBJECT_TYPE_POINT: Dimension.ElevationReferenceObjectType
+    class LinearReferenceTable(_message.Message):
+        __slots__ = ("rows",)
+        ROWS_FIELD_NUMBER: _ClassVar[int]
+        rows: _containers.RepeatedCompositeFieldContainer[Dimension.LinearReferenceTableRow]
+        def __init__(self, rows: _Optional[_Iterable[_Union[Dimension.LinearReferenceTableRow, _Mapping]]] = ...) -> None: ...
+    class LinearReferenceTableRow(_message.Message):
+        __slots__ = ("no", "description", "reference_object_type", "reference_object", "line_relative_distance", "coordinate_x", "coordinate_y", "coordinate_z")
+        class ReferenceObjectType(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
+            __slots__ = ()
+            REFERENCE_OBJECT_TYPE_NODE: _ClassVar[Dimension.LinearReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_CONTROL_POINT: _ClassVar[Dimension.LinearReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_LINE: _ClassVar[Dimension.LinearReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_MEMBER: _ClassVar[Dimension.LinearReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_POINT: _ClassVar[Dimension.LinearReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_POINT_ON_LINE: _ClassVar[Dimension.LinearReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_SNAP_POSITION: _ClassVar[Dimension.LinearReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_SURFACE: _ClassVar[Dimension.LinearReferenceTableRow.ReferenceObjectType]
+        REFERENCE_OBJECT_TYPE_NODE: Dimension.LinearReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_CONTROL_POINT: Dimension.LinearReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_LINE: Dimension.LinearReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_MEMBER: Dimension.LinearReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_POINT: Dimension.LinearReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_POINT_ON_LINE: Dimension.LinearReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_SNAP_POSITION: Dimension.LinearReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_SURFACE: Dimension.LinearReferenceTableRow.ReferenceObjectType
+        NO_FIELD_NUMBER: _ClassVar[int]
+        DESCRIPTION_FIELD_NUMBER: _ClassVar[int]
+        REFERENCE_OBJECT_TYPE_FIELD_NUMBER: _ClassVar[int]
+        REFERENCE_OBJECT_FIELD_NUMBER: _ClassVar[int]
+        LINE_RELATIVE_DISTANCE_FIELD_NUMBER: _ClassVar[int]
+        COORDINATE_X_FIELD_NUMBER: _ClassVar[int]
+        COORDINATE_Y_FIELD_NUMBER: _ClassVar[int]
+        COORDINATE_Z_FIELD_NUMBER: _ClassVar[int]
+        no: int
+        description: str
+        reference_object_type: Dimension.LinearReferenceTableRow.ReferenceObjectType
+        reference_object: int
+        line_relative_distance: float
+        coordinate_x: float
+        coordinate_y: float
+        coordinate_z: float
+        def __init__(self, no: _Optional[int] = ..., description: _Optional[str] = ..., reference_object_type: _Optional[_Union[Dimension.LinearReferenceTableRow.ReferenceObjectType, str]] = ..., reference_object: _Optional[int] = ..., line_relative_distance: _Optional[float] = ..., coordinate_x: _Optional[float] = ..., coordinate_y: _Optional[float] = ..., coordinate_z: _Optional[float] = ...) -> None: ...
+    class ArcLengthReferenceTable(_message.Message):
+        __slots__ = ("rows",)
+        ROWS_FIELD_NUMBER: _ClassVar[int]
+        rows: _containers.RepeatedCompositeFieldContainer[Dimension.ArcLengthReferenceTableRow]
+        def __init__(self, rows: _Optional[_Iterable[_Union[Dimension.ArcLengthReferenceTableRow, _Mapping]]] = ...) -> None: ...
+    class ArcLengthReferenceTableRow(_message.Message):
+        __slots__ = ("no", "description", "reference_object_type", "reference_object", "line_relative_distance", "coordinate_x", "coordinate_y", "coordinate_z")
+        class ReferenceObjectType(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
+            __slots__ = ()
+            REFERENCE_OBJECT_TYPE_NODE: _ClassVar[Dimension.ArcLengthReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_CONTROL_POINT: _ClassVar[Dimension.ArcLengthReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_LINE: _ClassVar[Dimension.ArcLengthReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_MEMBER: _ClassVar[Dimension.ArcLengthReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_POINT: _ClassVar[Dimension.ArcLengthReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_POINT_ON_LINE: _ClassVar[Dimension.ArcLengthReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_SNAP_POSITION: _ClassVar[Dimension.ArcLengthReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_SURFACE: _ClassVar[Dimension.ArcLengthReferenceTableRow.ReferenceObjectType]
+        REFERENCE_OBJECT_TYPE_NODE: Dimension.ArcLengthReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_CONTROL_POINT: Dimension.ArcLengthReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_LINE: Dimension.ArcLengthReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_MEMBER: Dimension.ArcLengthReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_POINT: Dimension.ArcLengthReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_POINT_ON_LINE: Dimension.ArcLengthReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_SNAP_POSITION: Dimension.ArcLengthReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_SURFACE: Dimension.ArcLengthReferenceTableRow.ReferenceObjectType
+        NO_FIELD_NUMBER: _ClassVar[int]
+        DESCRIPTION_FIELD_NUMBER: _ClassVar[int]
+        REFERENCE_OBJECT_TYPE_FIELD_NUMBER: _ClassVar[int]
+        REFERENCE_OBJECT_FIELD_NUMBER: _ClassVar[int]
+        LINE_RELATIVE_DISTANCE_FIELD_NUMBER: _ClassVar[int]
+        COORDINATE_X_FIELD_NUMBER: _ClassVar[int]
+        COORDINATE_Y_FIELD_NUMBER: _ClassVar[int]
+        COORDINATE_Z_FIELD_NUMBER: _ClassVar[int]
+        no: int
+        description: str
+        reference_object_type: Dimension.ArcLengthReferenceTableRow.ReferenceObjectType
+        reference_object: int
+        line_relative_distance: float
+        coordinate_x: float
+        coordinate_y: float
+        coordinate_z: float
+        def __init__(self, no: _Optional[int] = ..., description: _Optional[str] = ..., reference_object_type: _Optional[_Union[Dimension.ArcLengthReferenceTableRow.ReferenceObjectType, str]] = ..., reference_object: _Optional[int] = ..., line_relative_distance: _Optional[float] = ..., coordinate_x: _Optional[float] = ..., coordinate_y: _Optional[float] = ..., coordinate_z: _Optional[float] = ...) -> None: ...
+    class AngularReferenceTable(_message.Message):
+        __slots__ = ("rows",)
+        ROWS_FIELD_NUMBER: _ClassVar[int]
+        rows: _containers.RepeatedCompositeFieldContainer[Dimension.AngularReferenceTableRow]
+        def __init__(self, rows: _Optional[_Iterable[_Union[Dimension.AngularReferenceTableRow, _Mapping]]] = ...) -> None: ...
+    class AngularReferenceTableRow(_message.Message):
+        __slots__ = ("no", "description", "reference_object_type", "reference_object", "line_relative_distance", "coordinate_x", "coordinate_y", "coordinate_z")
+        class ReferenceObjectType(int, metaclass=_enum_type_wrapper.EnumTypeWrapper):
+            __slots__ = ()
+            REFERENCE_OBJECT_TYPE_NODE: _ClassVar[Dimension.AngularReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_CONTROL_POINT: _ClassVar[Dimension.AngularReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_LINE: _ClassVar[Dimension.AngularReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_MEMBER: _ClassVar[Dimension.AngularReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_POINT: _ClassVar[Dimension.AngularReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_POINT_ON_LINE: _ClassVar[Dimension.AngularReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_SNAP_POSITION: _ClassVar[Dimension.AngularReferenceTableRow.ReferenceObjectType]
+            REFERENCE_OBJECT_TYPE_SURFACE: _ClassVar[Dimension.AngularReferenceTableRow.ReferenceObjectType]
+        REFERENCE_OBJECT_TYPE_NODE: Dimension.AngularReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_CONTROL_POINT: Dimension.AngularReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_LINE: Dimension.AngularReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_MEMBER: Dimension.AngularReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_POINT: Dimension.AngularReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_POINT_ON_LINE: Dimension.AngularReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_SNAP_POSITION: Dimension.AngularReferenceTableRow.ReferenceObjectType
+        REFERENCE_OBJECT_TYPE_SURFACE: Dimension.AngularReferenceTableRow.ReferenceObjectType
+        NO_FIELD_NUMBER: _ClassVar[int]
+        DESCRIPTION_FIELD_NUMBER: _ClassVar[int]
+        REFERENCE_OBJECT_TYPE_FIELD_NUMBER: _ClassVar[int]
+        REFERENCE_OBJECT_FIELD_NUMBER: _ClassVar[int]
+        LINE_RELATIVE_DISTANCE_FIELD_NUMBER: _ClassVar[int]
+        COORDINATE_X_FIELD_NUMBER: _ClassVar[int]
+        COORDINATE_Y_FIELD_NUMBER: _ClassVar[int]
+        COORDINATE_Z_FIELD_NUMBER: _ClassVar[int]
+        no: int
+        description: str
+        reference_object_type: Dimension.AngularReferenceTableRow.ReferenceObjectType
+        reference_object: int
+        line_relative_distance: float
+        coordinate_x: float
+        coordinate_y: float
+        coordinate_z: float
+        def __init__(self, no: _Optional[int] = ..., description: _Optional[str] = ..., reference_object_type: _Optional[_Union[Dimension.AngularReferenceTableRow.ReferenceObjectType, str]] = ..., reference_object: _Optional[int] = ..., line_relative_distance: _Optional[float] = ..., coordinate_x: _Optional[float] = ..., coordinate_y: _Optional[float] = ..., coordinate_z: _Optional[float] = ...) -> None: ...
     NO_FIELD_NUMBER: _ClassVar[int]
     TYPE_FIELD_NUMBER: _ClassVar[int]
     USER_DEFINED_NAME_ENABLED_FIELD_NUMBER: _ClassVar[int]
@@ -123,10 +246,10 @@ class Dimension(_message.Message):
     LINEAR_COORDINATE_SYSTEM_FIELD_NUMBER: _ClassVar[int]
     LINEAR_REFERENCE_FIELD_NUMBER: _ClassVar[int]
     LINEAR_PLANE_FIELD_NUMBER: _ClassVar[int]
-    LINEAR_GLOBAL_DIMENSION_LINE_OFFSET_FIELD_NUMBER: _ClassVar[int]
     LINEAR_GLOBAL_DIMENSION_LINE_OFFSET_X_FIELD_NUMBER: _ClassVar[int]
     LINEAR_GLOBAL_DIMENSION_LINE_OFFSET_Y_FIELD_NUMBER: _ClassVar[int]
     LINEAR_GLOBAL_DIMENSION_LINE_OFFSET_Z_FIELD_NUMBER: _ClassVar[int]
+    LINEAR_GLOBAL_DIMENSION_LINE_OFFSET_FIELD_NUMBER: _ClassVar[int]
     LINEAR_REFERENCE_TABLE_FIELD_NUMBER: _ClassVar[int]
     ARC_LENGTH_REFERENCE_LINE_FIELD_NUMBER: _ClassVar[int]
     ARC_LENGTH_REFERENCE_TABLE_FIELD_NUMBER: _ClassVar[int]
@@ -136,110 +259,124 @@ class Dimension(_message.Message):
     ANGULAR_ANGLE_GREATER_THAN_180_FIELD_NUMBER: _ClassVar[int]
     RADIUS_DIAMETER_REFERENCE_LINE_FIELD_NUMBER: _ClassVar[int]
     RADIUS_DIAMETER_IS_TARGET_POINT_FIELD_NUMBER: _ClassVar[int]
-    RADIUS_DIAMETER_TARGET_POINT_COORDINATES_FIELD_NUMBER: _ClassVar[int]
     RADIUS_DIAMETER_TARGET_POINT_COORDINATE_X_FIELD_NUMBER: _ClassVar[int]
     RADIUS_DIAMETER_TARGET_POINT_COORDINATE_Y_FIELD_NUMBER: _ClassVar[int]
     RADIUS_DIAMETER_TARGET_POINT_COORDINATE_Z_FIELD_NUMBER: _ClassVar[int]
+    RADIUS_DIAMETER_TARGET_POINT_COORDINATES_FIELD_NUMBER: _ClassVar[int]
     RADIUS_DIAMETER_POSITION_ON_LINE_FIELD_NUMBER: _ClassVar[int]
     SLOPE_COORDINATE_SYSTEM_FIELD_NUMBER: _ClassVar[int]
     SLOPE_PLANE_FIELD_NUMBER: _ClassVar[int]
+    SLOPE_REFERENCE_TYPE_FIELD_NUMBER: _ClassVar[int]
     SLOPE_REFERENCE_LINE_FIELD_NUMBER: _ClassVar[int]
+    SLOPE_FIRST_POINT_COORDINATE_X_FIELD_NUMBER: _ClassVar[int]
+    SLOPE_FIRST_POINT_COORDINATE_Y_FIELD_NUMBER: _ClassVar[int]
+    SLOPE_FIRST_POINT_COORDINATE_Z_FIELD_NUMBER: _ClassVar[int]
+    SLOPE_FIRST_POINT_COORDINATES_FIELD_NUMBER: _ClassVar[int]
+    SLOPE_SECOND_POINT_COORDINATE_X_FIELD_NUMBER: _ClassVar[int]
+    SLOPE_SECOND_POINT_COORDINATE_Y_FIELD_NUMBER: _ClassVar[int]
+    SLOPE_SECOND_POINT_COORDINATE_Z_FIELD_NUMBER: _ClassVar[int]
+    SLOPE_SECOND_POINT_COORDINATES_FIELD_NUMBER: _ClassVar[int]
     SLOPE_DIRECTION_FIELD_NUMBER: _ClassVar[int]
     SLOPE_REFER_DISTANCE_FROM_LINE_END_FIELD_NUMBER: _ClassVar[int]
-    SLOPE_POSITION_IS_RELATIVE_FIELD_NUMBER: _ClassVar[int]
     SLOPE_POSITION_ABSOLUTE_FIELD_NUMBER: _ClassVar[int]
     SLOPE_POSITION_RELATIVE_FIELD_NUMBER: _ClassVar[int]
+    SLOPE_POSITION_IS_RELATIVE_FIELD_NUMBER: _ClassVar[int]
     ELEVATION_REFERENCE_OBJECT_TYPE_FIELD_NUMBER: _ClassVar[int]
     ELEVATION_REFERENCE_SURFACE_FIELD_NUMBER: _ClassVar[int]
     ELEVATION_REFERENCE_NODE_FIELD_NUMBER: _ClassVar[int]
     ELEVATION_REFERENCE_CONTROL_POINT_FIELD_NUMBER: _ClassVar[int]
-    ELEVATION_REFERENCE_POINT_COORDINATES_FIELD_NUMBER: _ClassVar[int]
     ELEVATION_REFERENCE_POINT_COORDINATE_X_FIELD_NUMBER: _ClassVar[int]
     ELEVATION_REFERENCE_POINT_COORDINATE_Y_FIELD_NUMBER: _ClassVar[int]
     ELEVATION_REFERENCE_POINT_COORDINATE_Z_FIELD_NUMBER: _ClassVar[int]
+    ELEVATION_REFERENCE_POINT_COORDINATES_FIELD_NUMBER: _ClassVar[int]
     ELEVATION_DISTANCE_FROM_PICKED_POSITION_FIELD_NUMBER: _ClassVar[int]
     ELEVATION_ROTATION_AROUND_Z_FIELD_NUMBER: _ClassVar[int]
     ELEVATION_REFERENCE_LEVEL_HEIGHT_FIELD_NUMBER: _ClassVar[int]
     ELEVATION_IS_ALTITUDE_FIELD_NUMBER: _ClassVar[int]
     ELEVATION_ALTITUDE_FIELD_NUMBER: _ClassVar[int]
+    PARENT_LAYER_FIELD_NUMBER: _ClassVar[int]
+    IS_LOCKED_BY_PARENT_LAYER_FIELD_NUMBER: _ClassVar[int]
     IS_GENERATED_FIELD_NUMBER: _ClassVar[int]
     GENERATING_OBJECT_INFO_FIELD_NUMBER: _ClassVar[int]
+    IS_DETAIL_DIMENSION_FIELD_NUMBER: _ClassVar[int]
+    DETAIL_DIMENSION_PARENT_OBJECT_FIELD_NUMBER: _ClassVar[int]
     ID_FOR_EXPORT_IMPORT_FIELD_NUMBER: _ClassVar[int]
     METADATA_FOR_EXPORT_IMPORT_FIELD_NUMBER: _ClassVar[int]
     no: int
-    type: DimensionType
+    type: Dimension.Type
     user_defined_name_enabled: bool
     name: str
     display_properties_index: int
     dimension_line_offset: float
     is_custom_vertical_position: bool
-    custom_vertical_position: DimensionCustomVerticalPosition
+    custom_vertical_position: Dimension.CustomVerticalPosition
     is_custom_horizontal_position: bool
-    custom_horizontal_position: DimensionCustomHorizontalPosition
+    custom_horizontal_position: Dimension.CustomHorizontalPosition
     symbol: str
     comment: str
     measured_length: float
-    measured_lengths: _containers.RepeatedScalarFieldContainer[int]
+    measured_lengths: _containers.RepeatedScalarFieldContainer[float]
     measured_angle: float
-    measured_angles: _containers.RepeatedScalarFieldContainer[int]
+    measured_angles: _containers.RepeatedScalarFieldContainer[float]
     measured_slope: float
     is_global_dimension_line_offset: bool
     linear_coordinate_system: int
-    linear_reference: DimensionLinearReference
-    linear_plane: DimensionLinearPlane
-    linear_global_dimension_line_offset: _common_pb2.Vector3d
+    linear_reference: Dimension.LinearReference
+    linear_plane: Dimension.LinearPlane
     linear_global_dimension_line_offset_x: float
     linear_global_dimension_line_offset_y: float
     linear_global_dimension_line_offset_z: float
-    linear_reference_table: ArrayOfDimensionLinearReferenceTable
+    linear_global_dimension_line_offset: _common_pb2.Vector3d
+    linear_reference_table: Dimension.LinearReferenceTable
     arc_length_reference_line: int
-    arc_length_reference_table: ArrayOfDimensionArcLengthReferenceTable
+    arc_length_reference_table: Dimension.ArcLengthReferenceTable
     arc_length_angle_greater_than_180: bool
-    angular_reference_table: ArrayOfDimensionAngularReferenceTable
-    angular_quadrant: DimensionAngularQuadrant
+    angular_reference_table: Dimension.AngularReferenceTable
+    angular_quadrant: Dimension.AngularQuadrant
     angular_angle_greater_than_180: bool
     radius_diameter_reference_line: int
     radius_diameter_is_target_point: bool
-    radius_diameter_target_point_coordinates: _common_pb2.Vector3d
     radius_diameter_target_point_coordinate_x: float
     radius_diameter_target_point_coordinate_y: float
     radius_diameter_target_point_coordinate_z: float
+    radius_diameter_target_point_coordinates: _common_pb2.Vector3d
     radius_diameter_position_on_line: float
     slope_coordinate_system: int
-    slope_plane: DimensionSlopePlane
+    slope_plane: Dimension.SlopePlane
+    slope_reference_type: Dimension.SlopeReferenceType
     slope_reference_line: int
-    slope_direction: DimensionSlopeDirection
+    slope_first_point_coordinate_x: float
+    slope_first_point_coordinate_y: float
+    slope_first_point_coordinate_z: float
+    slope_first_point_coordinates: _common_pb2.Vector3d
+    slope_second_point_coordinate_x: float
+    slope_second_point_coordinate_y: float
+    slope_second_point_coordinate_z: float
+    slope_second_point_coordinates: _common_pb2.Vector3d
+    slope_direction: Dimension.SlopeDirection
     slope_refer_distance_from_line_end: bool
-    slope_position_is_relative: bool
     slope_position_absolute: float
     slope_position_relative: float
-    elevation_reference_object_type: DimensionElevationReferenceObjectType
+    slope_position_is_relative: bool
+    elevation_reference_object_type: Dimension.ElevationReferenceObjectType
     elevation_reference_surface: int
     elevation_reference_node: int
     elevation_reference_control_point: int
-    elevation_reference_point_coordinates: _common_pb2.Vector3d
     elevation_reference_point_coordinate_x: float
     elevation_reference_point_coordinate_y: float
     elevation_reference_point_coordinate_z: float
+    elevation_reference_point_coordinates: _common_pb2.Vector3d
     elevation_distance_from_picked_position: float
     elevation_rotation_around_z: float
     elevation_reference_level_height: float
     elevation_is_altitude: bool
     elevation_altitude: float
+    parent_layer: int
+    is_locked_by_parent_layer: bool
     is_generated: bool
     generating_object_info: str
+    is_detail_dimension: bool
+    detail_dimension_parent_object: int
     id_for_export_import: str
     metadata_for_export_import: str
-    def __init__(self, no: _Optional[int] = ..., type: _Optional[_Union[DimensionType, str]] = ..., user_defined_name_enabled: bool = ..., name: _Optional[str] = ..., display_properties_index: _Optional[int] = ..., dimension_line_offset: _Optional[float] = ..., is_custom_vertical_position: bool = ..., custom_vertical_position: _Optional[_Union[DimensionCustomVerticalPosition, str]] = ..., is_custom_horizontal_position: bool = ..., custom_horizontal_position: _Optional[_Union[DimensionCustomHorizontalPosition, str]] = ..., symbol: _Optional[str] = ..., comment: _Optional[str] = ..., measured_length: _Optional[float] = ..., measured_lengths: _Optional[_Iterable[int]] = ..., measured_angle: _Optional[float] = ..., measured_angles: _Optional[_Iterable[int]] = ..., measured_slope: _Optional[float] = ..., is_global_dimension_line_offset: bool = ..., linear_coordinate_system: _Optional[int] = ..., linear_reference: _Optional[_Union[DimensionLinearReference, str]] = ..., linear_plane: _Optional[_Union[DimensionLinearPlane, str]] = ..., linear_global_dimension_line_offset: _Optional[_Union[_common_pb2.Vector3d, _Mapping]] = ..., linear_global_dimension_line_offset_x: _Optional[float] = ..., linear_global_dimension_line_offset_y: _Optional[float] = ..., linear_global_dimension_line_offset_z: _Optional[float] = ..., linear_reference_table: _Optional[_Union[ArrayOfDimensionLinearReferenceTable, _Mapping]] = ..., arc_length_reference_line: _Optional[int] = ..., arc_length_reference_table: _Optional[_Union[ArrayOfDimensionArcLengthReferenceTable, _Mapping]] = ..., arc_length_angle_greater_than_180: bool = ..., angular_reference_table: _Optional[_Union[ArrayOfDimensionAngularReferenceTable, _Mapping]] = ..., angular_quadrant: _Optional[_Union[DimensionAngularQuadrant, str]] = ..., angular_angle_greater_than_180: bool = ..., radius_diameter_reference_line: _Optional[int] = ..., radius_diameter_is_target_point: bool = ..., radius_diameter_target_point_coordinates: _Optional[_Union[_common_pb2.Vector3d, _Mapping]] = ..., radius_diameter_target_point_coordinate_x: _Optional[float] = ..., radius_diameter_target_point_coordinate_y: _Optional[float] = ..., radius_diameter_target_point_coordinate_z: _Optional[float] = ..., radius_diameter_position_on_line: _Optional[float] = ..., slope_coordinate_system: _Optional[int] = ..., slope_plane: _Optional[_Union[DimensionSlopePlane, str]] = ..., slope_reference_line: _Optional[int] = ..., slope_direction: _Optional[_Union[DimensionSlopeDirection, str]] = ..., slope_refer_distance_from_line_end: bool = ..., slope_position_is_relative: bool = ..., slope_position_absolute: _Optional[float] = ..., slope_position_relative: _Optional[float] = ..., elevation_reference_object_type: _Optional[_Union[DimensionElevationReferenceObjectType, str]] = ..., elevation_reference_surface: _Optional[int] = ..., elevation_reference_node: _Optional[int] = ..., elevation_reference_control_point: _Optional[int] = ..., elevation_reference_point_coordinates: _Optional[_Union[_common_pb2.Vector3d, _Mapping]] = ..., elevation_reference_point_coordinate_x: _Optional[float] = ..., elevation_reference_point_coordinate_y: _Optional[float] = ..., elevation_reference_point_coordinate_z: _Optional[float] = ..., elevation_distance_from_picked_position: _Optional[float] = ..., elevation_rotation_around_z: _Optional[float] = ..., elevation_reference_level_height: _Optional[float] = ..., elevation_is_altitude: bool = ..., elevation_altitude: _Optional[float] = ..., is_generated: bool = ..., generating_object_info: _Optional[str] = ..., id_for_export_import: _Optional[str] = ..., metadata_for_export_import: _Optional[str] = ...) -> None: ...
-
-class ArrayOfDimensionLinearReferenceTable(_message.Message):
-    __slots__ = ()
-    def __init__(self) -> None: ...
-
-class ArrayOfDimensionArcLengthReferenceTable(_message.Message):
-    __slots__ = ()
-    def __init__(self) -> None: ...
-
-class ArrayOfDimensionAngularReferenceTable(_message.Message):
-    __slots__ = ()
-    def __init__(self) -> None: ...
+    def __init__(self, no: _Optional[int] = ..., type: _Optional[_Union[Dimension.Type, str]] = ..., user_defined_name_enabled: bool = ..., name: _Optional[str] = ..., display_properties_index: _Optional[int] = ..., dimension_line_offset: _Optional[float] = ..., is_custom_vertical_position: bool = ..., custom_vertical_position: _Optional[_Union[Dimension.CustomVerticalPosition, str]] = ..., is_custom_horizontal_position: bool = ..., custom_horizontal_position: _Optional[_Union[Dimension.CustomHorizontalPosition, str]] = ..., symbol: _Optional[str] = ..., comment: _Optional[str] = ..., measured_length: _Optional[float] = ..., measured_lengths: _Optional[_Iterable[float]] = ..., measured_angle: _Optional[float] = ..., measured_angles: _Optional[_Iterable[float]] = ..., measured_slope: _Optional[float] = ..., is_global_dimension_line_offset: bool = ..., linear_coordinate_system: _Optional[int] = ..., linear_reference: _Optional[_Union[Dimension.LinearReference, str]] = ..., linear_plane: _Optional[_Union[Dimension.LinearPlane, str]] = ..., linear_global_dimension_line_offset_x: _Optional[float] = ..., linear_global_dimension_line_offset_y: _Optional[float] = ..., linear_global_dimension_line_offset_z: _Optional[float] = ..., linear_global_dimension_line_offset: _Optional[_Union[_common_pb2.Vector3d, _Mapping]] = ..., linear_reference_table: _Optional[_Union[Dimension.LinearReferenceTable, _Mapping]] = ..., arc_length_reference_line: _Optional[int] = ..., arc_length_reference_table: _Optional[_Union[Dimension.ArcLengthReferenceTable, _Mapping]] = ..., arc_length_angle_greater_than_180: bool = ..., angular_reference_table: _Optional[_Union[Dimension.AngularReferenceTable, _Mapping]] = ..., angular_quadrant: _Optional[_Union[Dimension.AngularQuadrant, str]] = ..., angular_angle_greater_than_180: bool = ..., radius_diameter_reference_line: _Optional[int] = ..., radius_diameter_is_target_point: bool = ..., radius_diameter_target_point_coordinate_x: _Optional[float] = ..., radius_diameter_target_point_coordinate_y: _Optional[float] = ..., radius_diameter_target_point_coordinate_z: _Optional[float] = ..., radius_diameter_target_point_coordinates: _Optional[_Union[_common_pb2.Vector3d, _Mapping]] = ..., radius_diameter_position_on_line: _Optional[float] = ..., slope_coordinate_system: _Optional[int] = ..., slope_plane: _Optional[_Union[Dimension.SlopePlane, str]] = ..., slope_reference_type: _Optional[_Union[Dimension.SlopeReferenceType, str]] = ..., slope_reference_line: _Optional[int] = ..., slope_first_point_coordinate_x: _Optional[float] = ..., slope_first_point_coordinate_y: _Optional[float] = ..., slope_first_point_coordinate_z: _Optional[float] = ..., slope_first_point_coordinates: _Optional[_Union[_common_pb2.Vector3d, _Mapping]] = ..., slope_second_point_coordinate_x: _Optional[float] = ..., slope_second_point_coordinate_y: _Optional[float] = ..., slope_second_point_coordinate_z: _Optional[float] = ..., slope_second_point_coordinates: _Optional[_Union[_common_pb2.Vector3d, _Mapping]] = ..., slope_direction: _Optional[_Union[Dimension.SlopeDirection, str]] = ..., slope_refer_distance_from_line_end: bool = ..., slope_position_absolute: _Optional[float] = ..., slope_position_relative: _Optional[float] = ..., slope_position_is_relative: bool = ..., elevation_reference_object_type: _Optional[_Union[Dimension.ElevationReferenceObjectType, str]] = ..., elevation_reference_surface: _Optional[int] = ..., elevation_reference_node: _Optional[int] = ..., elevation_reference_control_point: _Optional[int] = ..., elevation_reference_point_coordinate_x: _Optional[float] = ..., elevation_reference_point_coordinate_y: _Optional[float] = ..., elevation_reference_point_coordinate_z: _Optional[float] = ..., elevation_reference_point_coordinates: _Optional[_Union[_common_pb2.Vector3d, _Mapping]] = ..., elevation_distance_from_picked_position: _Optional[float] = ..., elevation_rotation_around_z: _Optional[float] = ..., elevation_reference_level_height: _Optional[float] = ..., elevation_is_altitude: bool = ..., elevation_altitude: _Optional[float] = ..., parent_layer: _Optional[int] = ..., is_locked_by_parent_layer: bool = ..., is_generated: bool = ..., generating_object_info: _Optional[str] = ..., is_detail_dimension: bool = ..., detail_dimension_parent_object: _Optional[int] = ..., id_for_export_import: _Optional[str] = ..., metadata_for_export_import: _Optional[str] = ...) -> None: ...

dlubal/api/rfem/guide_objects/dxf_file_model_object_pb2.py

@@ -25,17 +25,17 @@ _sym_db = _symbol_database.Default()
 from dlubal.api.common import common_pb2 as dlubal_dot_api_dot_common_dot_common__pb2
 
 
-DESCRIPTOR = _descriptor_pool.Default().AddSerializedFile(b'\n9dlubal/api/rfem/guide_objects/dxf_file_model_object.proto\x12\x1d\x64lubal.api.rfem.guide_objects\x1a\x1e\x64lubal/api/common/common.proto\"\xca\r\n\x12\x44xfFileModelObject\x12\n\n\x02no\x18\x01 \x01(\x05\x12<\n\x12origin_coordinates\x18\x02 \x01(\x0b\x32\x1b.dlubal.api.common.Vector3dH\x00\x88\x01\x01\x12 \n\x13origin_coordinate_x\x18\x03 \x01(\x01H\x01\x88\x01\x01\x12 \n\x13origin_coordinate_y\x18\x04 \x01(\x01H\x02\x88\x01\x01\x12 \n\x13origin_coordinate_z\x18\x05 \x01(\x01H\x03\x88\x01\x01\x12n\n\x18rotation_angles_sequence\x18\x06 \x01(\x0e\x32G.dlubal.api.rfem.guide_objects.DxfFileModelObjectRotationAnglesSequenceH\x04\x88\x01\x01\x12\x1d\n\x10rotation_angle_1\x18\x07 \x01(\x01H\x05\x88\x01\x01\x12\x1d\n\x10rotation_angle_2\x18\x08 \x01(\x01H\x06\x88\x01\x01\x12\x1d\n\x10rotation_angle_3\x18\t \x01(\x01H\x07\x88\x01\x01\x12&\n\x19user_defined_name_enabled\x18\n \x01(\x08H\x08\x88\x01\x01\x12\x11\n\x04name\x18\x0b \x01(\tH\t\x88\x01\x01\x12\x16\n\tfile_path\x18\x0c \x01(\tH\n\x88\x01\x01\x12\x16\n\tfile_name\x18\r \x01(\tH\x0b\x88\x01\x01\x12\x1e\n\x11\x63oordinate_system\x18\x0e \x01(\x05H\x0c\x88\x01\x01\x12W\n\x0cinsert_point\x18\x0f \x01(\x0e\x32<.dlubal.api.rfem.guide_objects.DxfFileModelObjectInsertPointH\r\x88\x01\x01\x12 \n\x13scale_is_nonuniform\x18\x10 \x01(\x08H\x0e\x88\x01\x01\x12)\n\x1cscale_is_defined_as_relative\x18\x11 \x01(\x08H\x0f\x88\x01\x01\x12\x1b\n\x0escale_relative\x18\x12 \x01(\x01H\x10\x88\x01\x01\x12\x1b\n\x0escale_absolute\x18\x13 \x01(\x01H\x11\x88\x01\x01\x12\x1d\n\x10scale_relative_x\x18\x14 \x01(\x01H\x12\x88\x01\x01\x12\x1d\n\x10scale_relative_y\x18\x15 \x01(\x01H\x13\x88\x01\x01\x12\x1d\n\x10scale_relative_z\x18\x16 \x01(\x01H\x14\x88\x01\x01\x12\x1d\n\x10scale_absolute_x\x18\x17 \x01(\x01H\x15\x88\x01\x01\x12\x1d\n\x10scale_absolute_y\x18\x18 \x01(\x01H\x16\x88\x01\x01\x12\x1d\n\x10scale_absolute_z\x18\x19 \x01(\x01H\x17\x88\x01\x01\x12\x14\n\x07\x63omment\x18\x1a \x01(\tH\x18\x88\x01\x01\x12\x19\n\x0cis_generated\x18\x1b \x01(\x08H\x19\x88\x01\x01\x12#\n\x16generating_object_info\x18\x1c \x01(\tH\x1a\x88\x01\x01\x12!\n\x14id_for_export_import\x18\x1d \x01(\tH\x1b\x88\x01\x01\x12\'\n\x1ametadata_for_export_import\x18\x1e \x01(\tH\x1c\x88\x01\x01\x42\x15\n\x13_origin_coordinatesB\x16\n\x14_origin_coordinate_xB\x16\n\x14_origin_coordinate_yB\x16\n\x14_origin_coordinate_zB\x1b\n\x19_rotation_angles_sequenceB\x13\n\x11_rotation_angle_1B\x13\n\x11_rotation_angle_2B\x13\n\x11_rotation_angle_3B\x1c\n\x1a_user_defined_name_enabledB\x07\n\x05_nameB\x0c\n\n_file_pathB\x0c\n\n_file_nameB\x14\n\x12_coordinate_systemB\x0f\n\r_insert_pointB\x16\n\x14_scale_is_nonuniformB\x1f\n\x1d_scale_is_defined_as_relativeB\x11\n\x0f_scale_relativeB\x11\n\x0f_scale_absoluteB\x13\n\x11_scale_relative_xB\x13\n\x11_scale_relative_yB\x13\n\x11_scale_relative_zB\x13\n\x11_scale_absolute_xB\x13\n\x11_scale_absolute_yB\x13\n\x11_scale_absolute_zB\n\n\x08_commentB\x0f\n\r_is_generatedB\x19\n\x17_generating_object_infoB\x17\n\x15_id_for_export_importB\x1d\n\x1b_metadata_for_export_import*\xfa\x02\n(DxfFileModelObjectRotationAnglesSequence\x12\x36\n2DXF_FILE_MODEL_OBJECT_ROTATION_ANGLES_SEQUENCE_XYZ\x10\x00\x12\x36\n2DXF_FILE_MODEL_OBJECT_ROTATION_ANGLES_SEQUENCE_XZY\x10\x01\x12\x36\n2DXF_FILE_MODEL_OBJECT_ROTATION_ANGLES_SEQUENCE_YXZ\x10\x02\x12\x36\n2DXF_FILE_MODEL_OBJECT_ROTATION_ANGLES_SEQUENCE_YZX\x10\x03\x12\x36\n2DXF_FILE_MODEL_OBJECT_ROTATION_ANGLES_SEQUENCE_ZXY\x10\x04\x12\x36\n2DXF_FILE_MODEL_OBJECT_ROTATION_ANGLES_SEQUENCE_ZYX\x10\x05*\xc8\x05\n\x1d\x44xfFileModelObjectInsertPoint\x12-\n)DXF_FILE_MODEL_OBJECT_INSERT_POINT_CENTER\x10\x00\x12)\n%DXF_FILE_MODEL_OBJECT_INSERT_POINT_MX\x10\x02\x12-\n)DXF_FILE_MODEL_OBJECT_INSERT_POINT_MXMYMZ\x10\x0e\x12-\n)DXF_FILE_MODEL_OBJECT_INSERT_POINT_MXMYPZ\x10\n\x12-\n)DXF_FILE_MODEL_OBJECT_INSERT_POINT_MXPYMZ\x10\x0c\x12-\n)DXF_FILE_MODEL_OBJECT_INSERT_POINT_MXPYPZ\x10\x08\x12)\n%DXF_FILE_MODEL_OBJECT_INSERT_POINT_MY\x10\x04\x12)\n%DXF_FILE_MODEL_OBJECT_INSERT_POINT_MZ\x10\x06\x12)\n%DXF_FILE_MODEL_OBJECT_INSERT_POINT_PX\x10\x01\x12-\n)DXF_FILE_MODEL_OBJECT_INSERT_POINT_PXMYMZ\x10\r\x12-\n)DXF_FILE_MODEL_OBJECT_INSERT_POINT_PXMYPZ\x10\t\x12-\n)DXF_FILE_MODEL_OBJECT_INSERT_POINT_PXPYMZ\x10\x0b\x12-\n)DXF_FILE_MODEL_OBJECT_INSERT_POINT_PXPYPZ\x10\x07\x12)\n%DXF_FILE_MODEL_OBJECT_INSERT_POINT_PY\x10\x03\x12)\n%DXF_FILE_MODEL_OBJECT_INSERT_POINT_PZ\x10\x05\x62\x06proto3')
+DESCRIPTOR = _descriptor_pool.Default().AddSerializedFile(b'\n9dlubal/api/rfem/guide_objects/dxf_file_model_object.proto\x12\x1d\x64lubal.api.rfem.guide_objects\x1a\x1e\x64lubal/api/common/common.proto\"\x8c\x13\n\x12\x44xfFileModelObject\x12\x0f\n\x02no\x18\x01 \x01(\x05H\x00\x88\x01\x01\x12<\n\x12origin_coordinates\x18\x02 \x01(\x0b\x32\x1b.dlubal.api.common.Vector3dH\x01\x88\x01\x01\x12 \n\x13origin_coordinate_x\x18\x03 \x01(\x01H\x02\x88\x01\x01\x12 \n\x13origin_coordinate_y\x18\x04 \x01(\x01H\x03\x88\x01\x01\x12 \n\x13origin_coordinate_z\x18\x05 \x01(\x01H\x04\x88\x01\x01\x12o\n\x18rotation_angles_sequence\x18\x06 \x01(\x0e\x32H.dlubal.api.rfem.guide_objects.DxfFileModelObject.RotationAnglesSequenceH\x05\x88\x01\x01\x12\x1d\n\x10rotation_angle_1\x18\x07 \x01(\x01H\x06\x88\x01\x01\x12\x1d\n\x10rotation_angle_2\x18\x08 \x01(\x01H\x07\x88\x01\x01\x12\x1d\n\x10rotation_angle_3\x18\t \x01(\x01H\x08\x88\x01\x01\x12&\n\x19user_defined_name_enabled\x18\n \x01(\x08H\t\x88\x01\x01\x12\x11\n\x04name\x18\x0b \x01(\tH\n\x88\x01\x01\x12\x16\n\tfile_path\x18\x0c \x01(\tH\x0b\x88\x01\x01\x12\x16\n\tfile_name\x18\r \x01(\tH\x0c\x88\x01\x01\x12\x1e\n\x11\x63oordinate_system\x18\x0e \x01(\x05H\r\x88\x01\x01\x12X\n\x0cinsert_point\x18\x0f \x01(\x0e\x32=.dlubal.api.rfem.guide_objects.DxfFileModelObject.InsertPointH\x0e\x88\x01\x01\x12 \n\x13scale_is_nonuniform\x18\x10 \x01(\x08H\x0f\x88\x01\x01\x12)\n\x1cscale_is_defined_as_relative\x18\x11 \x01(\x08H\x10\x88\x01\x01\x12\x1b\n\x0escale_relative\x18\x12 \x01(\x01H\x11\x88\x01\x01\x12\x1b\n\x0escale_absolute\x18\x13 \x01(\x01H\x12\x88\x01\x01\x12\x1d\n\x10scale_relative_x\x18\x14 \x01(\x01H\x13\x88\x01\x01\x12\x1d\n\x10scale_relative_y\x18\x15 \x01(\x01H\x14\x88\x01\x01\x12\x1d\n\x10scale_relative_z\x18\x16 \x01(\x01H\x15\x88\x01\x01\x12\x1d\n\x10scale_absolute_x\x18\x17 \x01(\x01H\x16\x88\x01\x01\x12\x1d\n\x10scale_absolute_y\x18\x18 \x01(\x01H\x17\x88\x01\x01\x12\x1d\n\x10scale_absolute_z\x18\x19 \x01(\x01H\x18\x88\x01\x01\x12\x14\n\x07\x63omment\x18\x1a \x01(\tH\x19\x88\x01\x01\x12\x19\n\x0cis_generated\x18\x1b \x01(\x08H\x1a\x88\x01\x01\x12#\n\x16generating_object_info\x18\x1c \x01(\tH\x1b\x88\x01\x01\x12 \n\x13select_insert_point\x18\x1d \x01(\x08H\x1c\x88\x01\x01\x12!\n\x14id_for_export_import\x18\x1e \x01(\tH\x1d\x88\x01\x01\x12\'\n\x1ametadata_for_export_import\x18\x1f \x01(\tH\x1e\x88\x01\x01\"\xe4\x01\n\x16RotationAnglesSequence\x12 \n\x1cROTATION_ANGLES_SEQUENCE_XYZ\x10\x00\x12 \n\x1cROTATION_ANGLES_SEQUENCE_XZY\x10\x01\x12 \n\x1cROTATION_ANGLES_SEQUENCE_YXZ\x10\x02\x12 \n\x1cROTATION_ANGLES_SEQUENCE_YZX\x10\x03\x12 \n\x1cROTATION_ANGLES_SEQUENCE_ZXY\x10\x04\x12 \n\x1cROTATION_ANGLES_SEQUENCE_ZYX\x10\x05\"\x90\x03\n\x0bInsertPoint\x12\x17\n\x13INSERT_POINT_CENTER\x10\x00\x12\x13\n\x0fINSERT_POINT_MX\x10\x02\x12\x17\n\x13INSERT_POINT_MXMYMZ\x10\x0e\x12\x17\n\x13INSERT_POINT_MXMYPZ\x10\n\x12\x17\n\x13INSERT_POINT_MXPYMZ\x10\x0c\x12\x17\n\x13INSERT_POINT_MXPYPZ\x10\x08\x12\x13\n\x0fINSERT_POINT_MY\x10\x04\x12\x13\n\x0fINSERT_POINT_MZ\x10\x06\x12\"\n\x1eINSERT_POINT_ORIGINAL_POSITION\x10\x0f\x12\x13\n\x0fINSERT_POINT_PX\x10\x01\x12\x17\n\x13INSERT_POINT_PXMYMZ\x10\r\x12\x17\n\x13INSERT_POINT_PXMYPZ\x10\t\x12\x17\n\x13INSERT_POINT_PXPYMZ\x10\x0b\x12\x17\n\x13INSERT_POINT_PXPYPZ\x10\x07\x12\x13\n\x0fINSERT_POINT_PY\x10\x03\x12\x13\n\x0fINSERT_POINT_PZ\x10\x05\x42\x05\n\x03_noB\x15\n\x13_origin_coordinatesB\x16\n\x14_origin_coordinate_xB\x16\n\x14_origin_coordinate_yB\x16\n\x14_origin_coordinate_zB\x1b\n\x19_rotation_angles_sequenceB\x13\n\x11_rotation_angle_1B\x13\n\x11_rotation_angle_2B\x13\n\x11_rotation_angle_3B\x1c\n\x1a_user_defined_name_enabledB\x07\n\x05_nameB\x0c\n\n_file_pathB\x0c\n\n_file_nameB\x14\n\x12_coordinate_systemB\x0f\n\r_insert_pointB\x16\n\x14_scale_is_nonuniformB\x1f\n\x1d_scale_is_defined_as_relativeB\x11\n\x0f_scale_relativeB\x11\n\x0f_scale_absoluteB\x13\n\x11_scale_relative_xB\x13\n\x11_scale_relative_yB\x13\n\x11_scale_relative_zB\x13\n\x11_scale_absolute_xB\x13\n\x11_scale_absolute_yB\x13\n\x11_scale_absolute_zB\n\n\x08_commentB\x0f\n\r_is_generatedB\x19\n\x17_generating_object_infoB\x16\n\x14_select_insert_pointB\x17\n\x15_id_for_export_importB\x1d\n\x1b_metadata_for_export_importb\x06proto3')
 
 _globals = globals()
 _builder.BuildMessageAndEnumDescriptors(DESCRIPTOR, _globals)
 _builder.BuildTopDescriptorsAndMessages(DESCRIPTOR, 'dlubal.api.rfem.guide_objects.dxf_file_model_object_pb2', _globals)
 if not _descriptor._USE_C_DESCRIPTORS:
   DESCRIPTOR._loaded_options = None
-  _globals['_DXFFILEMODELOBJECTROTATIONANGLESSEQUENCE']._serialized_start=1866
-  _globals['_DXFFILEMODELOBJECTROTATIONANGLESSEQUENCE']._serialized_end=2244
-  _globals['_DXFFILEMODELOBJECTINSERTPOINT']._serialized_start=2247
-  _globals['_DXFFILEMODELOBJECTINSERTPOINT']._serialized_end=2959
   _globals['_DXFFILEMODELOBJECT']._serialized_start=125
-  _globals['_DXFFILEMODELOBJECT']._serialized_end=1863
+  _globals['_DXFFILEMODELOBJECT']._serialized_end=2569
+  _globals['_DXFFILEMODELOBJECT_ROTATIONANGLESSEQUENCE']._serialized_start=1281
+  _globals['_DXFFILEMODELOBJECT_ROTATIONANGLESSEQUENCE']._serialized_end=1509
+  _globals['_DXFFILEMODELOBJECT_INSERTPOINT']._serialized_start=1512
+  _globals['_DXFFILEMODELOBJECT_INSERTPOINT']._serialized_end=1912
 # @@protoc_insertion_point(module_scope)