cuda-cccl 0.1.3.1.0.dev1486__cp312-cp312-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl

cuda/cccl/headers/include/cub/device/device_reduce.cuh

@@ -0,0 +1,1387 @@
+/******************************************************************************
+ * Copyright (c) 2011, Duane Merrill.  All rights reserved.
+ * Copyright (c) 2011-2024, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the NVIDIA CORPORATION nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NVIDIA CORPORATION BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************/
+
+//! @file
+//! cub::DeviceReduce provides device-wide, parallel operations for computing a reduction across a sequence of data
+//! items residing within device-accessible memory.
+
+#pragma once
+
+#include <cub/config.cuh>
+
+#if defined(_CCCL_IMPLICIT_SYSTEM_HEADER_GCC)
+#  pragma GCC system_header
+#elif defined(_CCCL_IMPLICIT_SYSTEM_HEADER_CLANG)
+#  pragma clang system_header
+#elif defined(_CCCL_IMPLICIT_SYSTEM_HEADER_MSVC)
+#  pragma system_header
+#endif // no system header
+
+#include <cub/detail/choose_offset.cuh>
+#include <cub/device/dispatch/dispatch_reduce.cuh>
+#include <cub/device/dispatch/dispatch_reduce_by_key.cuh>
+#include <cub/device/dispatch/dispatch_streaming_reduce.cuh>
+#include <cub/util_type.cuh>
+
+#include <thrust/iterator/tabulate_output_iterator.h>
+
+#include <cuda/std/limits>
+
+CUB_NAMESPACE_BEGIN
+
+namespace detail
+{
+namespace reduce
+{
+template <typename ExtremumOutIteratorT, typename IndexOutIteratorT>
+struct unzip_and_write_arg_extremum_op
+{
+  ExtremumOutIteratorT result_out_it;
+  IndexOutIteratorT index_out_it;
+
+  template <typename IndexT, typename KeyValuePairT>
+  _CCCL_DEVICE _CCCL_FORCEINLINE void operator()(IndexT, KeyValuePairT reduced_result)
+  {
+    *result_out_it = reduced_result.value;
+    *index_out_it  = reduced_result.key;
+  }
+};
+} // namespace reduce
+} // namespace detail
+
+//! @rst
+//! DeviceReduce provides device-wide, parallel operations for computing
+//! a reduction across a sequence of data items residing within
+//! device-accessible memory.
+//!
+//! .. image:: ../../img/reduce_logo.png
+//!     :align: center
+//!
+//! Overview
+//! ====================================
+//!
+//! A `reduction <http://en.wikipedia.org/wiki/Reduce_(higher-order_function)>`_
+//! (or *fold*) uses a binary combining operator to compute a single aggregate
+//! from a sequence of input elements.
+//!
+//! Usage Considerations
+//! ====================================
+//!
+//! @cdp_class{DeviceReduce}
+//!
+//! Performance
+//! ====================================
+//!
+//! @linear_performance{reduction, reduce-by-key, and run-length encode}
+//!
+//! @endrst
+struct DeviceReduce
+{
+  //! @rst
+  //! Computes a device-wide reduction using the specified binary ``reduction_op`` functor and initial value ``init``.
+  //!
+  //! - Does not support binary reduction operators that are non-commutative.
+  //! - Provides "run-to-run" determinism for pseudo-associative reduction
+  //!   (e.g., addition of floating point types) on the same GPU device.
+  //!   However, results for pseudo-associative reduction may be inconsistent
+  //!   from one device to a another device of a different compute-capability
+  //!   because CUB can employ different tile-sizing for different architectures.
+  //! - The range ``[d_in, d_in + num_items)`` shall not overlap ``d_out``.
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates a user-defined min-reduction of a
+  //! device vector of ``int`` data elements.
+  //!
+  //! .. code-block:: c++
+  //!
+  //!    #include <cub/cub.cuh>
+  //!    // or equivalently <cub/device/device_reduce.cuh>
+  //!
+  //!    // CustomMin functor
+  //!    struct CustomMin
+  //!    {
+  //!        template <typename T>
+  //!        __device__ __forceinline__
+  //!        T operator()(const T &a, const T &b) const {
+  //!            return (b < a) ? b : a;
+  //!        }
+  //!    };
+  //!
+  //!    // Declare, allocate, and initialize device-accessible pointers for
+  //!    // input and output
+  //!    int          num_items;  // e.g., 7
+  //!    int          *d_in;      // e.g., [8, 6, 7, 5, 3, 0, 9]
+  //!    int          *d_out;     // e.g., [-]
+  //!    CustomMin    min_op;
+  //!    int          init;       // e.g., INT_MAX
+  //!    ...
+  //!
+  //!    // Determine temporary device storage requirements
+  //!    void     *d_temp_storage = nullptr;
+  //!    size_t   temp_storage_bytes = 0;
+  //!    cub::DeviceReduce::Reduce(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_in, d_out, num_items, min_op, init);
+  //!
+  //!    // Allocate temporary storage
+  //!    cudaMalloc(&d_temp_storage, temp_storage_bytes);
+  //!
+  //!    // Run reduction
+  //!    cub::DeviceReduce::Reduce(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_in, d_out, num_items, min_op, init);
+  //!
+  //!    // d_out <-- [0]
+  //!
+  //! @endrst
+  //!
+  //! @tparam InputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input items @iterator
+  //!
+  //! @tparam OutputIteratorT
+  //!   **[inferred]** Output iterator type for recording the reduced aggregate @iterator
+  //!
+  //! @tparam ReductionOpT
+  //!   **[inferred]** Binary reduction functor type having member `T operator()(const T &a, const T &b)`
+  //!
+  //! @tparam T
+  //!   **[inferred]** Data element type that is convertible to the `value` type of `InputIteratorT`
+  //!
+  //! @tparam NumItemsT
+  //!   **[inferred]** Type of num_items
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work
+  //!   is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in] d_in
+  //!   Pointer to the input sequence of data items
+  //!
+  //! @param[out] d_out
+  //!   Pointer to the output aggregate
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_in`)
+  //!
+  //! @param[in] reduction_op
+  //!   Binary reduction functor
+  //!
+  //! @param[in] init
+  //!   Initial value of the reduction
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename InputIteratorT, typename OutputIteratorT, typename ReductionOpT, typename T, typename NumItemsT>
+  CUB_RUNTIME_FUNCTION static cudaError_t Reduce(
+    void* d_temp_storage,
+    size_t& temp_storage_bytes,
+    InputIteratorT d_in,
+    OutputIteratorT d_out,
+    NumItemsT num_items,
+    ReductionOpT reduction_op,
+    T init,
+    cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceReduce::Reduce");
+
+    // Signed integer type for global offsets
+    using OffsetT = detail::choose_offset_t<NumItemsT>;
+
+    return DispatchReduce<InputIteratorT, OutputIteratorT, OffsetT, ReductionOpT, T>::Dispatch(
+      d_temp_storage, temp_storage_bytes, d_in, d_out, static_cast<OffsetT>(num_items), reduction_op, init, stream);
+  }
+
+  //! @rst
+  //! Computes a device-wide sum using the addition (``+``) operator.
+  //!
+  //! - Uses ``0`` as the initial value of the reduction.
+  //! - Does not support ``+`` operators that are non-commutative..
+  //! - Provides "run-to-run" determinism for pseudo-associative reduction
+  //!   (e.g., addition of floating point types) on the same GPU device.
+  //!   However, results for pseudo-associative reduction may be inconsistent
+  //!   from one device to a another device of a different compute-capability
+  //!   because CUB can employ different tile-sizing for different architectures.
+  //! - The range ``[d_in, d_in + num_items)`` shall not overlap ``d_out``.
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates the sum-reduction of a device vector
+  //! of ``int`` data elements.
+  //!
+  //! .. code-block:: c++
+  //!
+  //!    #include <cub/cub.cuh> // or equivalently <cub/device/device_reduce.cuh>
+  //!
+  //!    // Declare, allocate, and initialize device-accessible pointers
+  //!    // for input and output
+  //!    int  num_items;      // e.g., 7
+  //!    int  *d_in;          // e.g., [8, 6, 7, 5, 3, 0, 9]
+  //!    int  *d_out;         // e.g., [-]
+  //!    ...
+  //!
+  //!    // Determine temporary device storage requirements
+  //!    void     *d_temp_storage = nullptr;
+  //!    size_t   temp_storage_bytes = 0;
+  //!    cub::DeviceReduce::Sum(
+  //!      d_temp_storage, temp_storage_bytes, d_in, d_out, num_items);
+  //!
+  //!    // Allocate temporary storage
+  //!    cudaMalloc(&d_temp_storage, temp_storage_bytes);
+  //!
+  //!    // Run sum-reduction
+  //!    cub::DeviceReduce::Sum(d_temp_storage, temp_storage_bytes, d_in, d_out, num_items);
+  //!
+  //!    // d_out <-- [38]
+  //!
+  //! @endrst
+  //!
+  //! @tparam InputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input items @iterator
+  //!
+  //! @tparam OutputIteratorT
+  //!   **[inferred]** Output iterator type for recording the reduced aggregate @iterator
+  //!
+  //! @tparam NumItemsT
+  //!   **[inferred]** Type of num_items
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in] d_in
+  //!   Pointer to the input sequence of data items
+  //!
+  //! @param[out] d_out
+  //!   Pointer to the output aggregate
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_in`)
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename InputIteratorT, typename OutputIteratorT, typename NumItemsT>
+  CUB_RUNTIME_FUNCTION static cudaError_t
+  Sum(void* d_temp_storage,
+      size_t& temp_storage_bytes,
+      InputIteratorT d_in,
+      OutputIteratorT d_out,
+      NumItemsT num_items,
+      cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceReduce::Sum");
+
+    // Signed integer type for global offsets
+    using OffsetT = detail::choose_offset_t<NumItemsT>;
+
+    // The output value type
+    using OutputT = cub::detail::non_void_value_t<OutputIteratorT, cub::detail::it_value_t<InputIteratorT>>;
+
+    using InitT = OutputT;
+
+    return DispatchReduce<InputIteratorT, OutputIteratorT, OffsetT, ::cuda::std::plus<>, InitT>::Dispatch(
+      d_temp_storage,
+      temp_storage_bytes,
+      d_in,
+      d_out,
+      static_cast<OffsetT>(num_items),
+      ::cuda::std::plus<>{},
+      InitT{}, // zero-initialize
+      stream);
+  }
+
+  //! @rst
+  //! Computes a device-wide minimum using the less-than (``<``) operator.
+  //!
+  //! - Uses ``::cuda::std::numeric_limits<T>::max()`` as the initial value of the reduction.
+  //! - Does not support ``<`` operators that are non-commutative.
+  //! - Provides "run-to-run" determinism for pseudo-associative reduction
+  //!   (e.g., addition of floating point types) on the same GPU device.
+  //!   However, results for pseudo-associative reduction may be inconsistent
+  //!   from one device to a another device of a different compute-capability
+  //!   because CUB can employ different tile-sizing for different architectures.
+  //! - The range ``[d_in, d_in + num_items)`` shall not overlap ``d_out``.
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates the min-reduction of a device vector of ``int`` data elements.
+  //!
+  //! .. code-block:: c++
+  //!
+  //!    #include <cub/cub.cuh>
+  //!    // or equivalently <cub/device/device_reduce.cuh>
+  //!
+  //!    // Declare, allocate, and initialize device-accessible pointers
+  //!    // for input and output
+  //!    int  num_items;      // e.g., 7
+  //!    int  *d_in;          // e.g., [8, 6, 7, 5, 3, 0, 9]
+  //!    int  *d_out;         // e.g., [-]
+  //!    ...
+  //!
+  //!    // Determine temporary device storage requirements
+  //!    void     *d_temp_storage = nullptr;
+  //!    size_t   temp_storage_bytes = 0;
+  //!    cub::DeviceReduce::Min(
+  //!      d_temp_storage, temp_storage_bytes, d_in, d_out, num_items);
+  //!
+  //!    // Allocate temporary storage
+  //!    cudaMalloc(&d_temp_storage, temp_storage_bytes);
+  //!
+  //!    // Run min-reduction
+  //!    cub::DeviceReduce::Min(
+  //!      d_temp_storage, temp_storage_bytes, d_in, d_out, num_items);
+  //!
+  //!    // d_out <-- [0]
+  //!
+  //! @endrst
+  //!
+  //! @tparam InputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input items @iterator
+  //!
+  //! @tparam OutputIteratorT
+  //!   **[inferred]** Output iterator type for recording the reduced aggregate @iterator
+  //!
+  //! @tparam NumItemsT
+  //!   **[inferred]** Type of num_items
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in] d_in
+  //!   Pointer to the input sequence of data items
+  //!
+  //! @param[out] d_out
+  //!   Pointer to the output aggregate
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_in`)
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename InputIteratorT, typename OutputIteratorT, typename NumItemsT>
+  CUB_RUNTIME_FUNCTION static cudaError_t
+  Min(void* d_temp_storage,
+      size_t& temp_storage_bytes,
+      InputIteratorT d_in,
+      OutputIteratorT d_out,
+      NumItemsT num_items,
+      cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceReduce::Min");
+
+    // Signed integer type for global offsets
+    using OffsetT = detail::choose_offset_t<NumItemsT>;
+
+    // The input value type
+    using InputT = cub::detail::it_value_t<InputIteratorT>;
+
+    using InitT = InputT;
+
+    return DispatchReduce<InputIteratorT, OutputIteratorT, OffsetT, ::cuda::minimum<>, InitT>::Dispatch(
+      d_temp_storage,
+      temp_storage_bytes,
+      d_in,
+      d_out,
+      static_cast<OffsetT>(num_items),
+      ::cuda::minimum<>{},
+      ::cuda::std::numeric_limits<InitT>::max(),
+      stream);
+  }
+
+  //! @rst
+  //! Finds the first device-wide minimum using the less-than (``<``) operator and also returns the index of that item.
+  //!
+  //! - The minimum is written to ``d_min_out``
+  //! - The offset of the returned item is written to ``d_index_out``, the offset type being written is of type
+  //!   ``cuda::std::int64_t``.
+  //! - For zero-length inputs, ``cuda::std::numeric_limits<T>::max()}`` is written to ``d_min_out``  and the index
+  //!   ``1`` is written to ``d_index_out``.
+  //! - Does not support ``<`` operators that are non-commutative.
+  //! - Provides "run-to-run" determinism for pseudo-associative reduction
+  //!   (e.g., addition of floating point types) on the same GPU device.
+  //!   However, results for pseudo-associative reduction may be inconsistent
+  //!   from one device to a another device of a different compute-capability
+  //!   because CUB can employ different tile-sizing for different architectures.
+  //! - The range ``[d_in, d_in + num_items)`` shall not overlap ``d_min_out`` nor ``d_index_out``.
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates the argmin-reduction of a device vector
+  //! of ``int`` data elements.
+  //!
+  //! .. code-block:: c++
+  //!
+  //!    #include <cub/cub.cuh> // or equivalently <cub/device/device_reduce.cuh>
+  //!    #include <cuda/std/cstdint>
+  //!
+  //!    // Declare, allocate, and initialize device-accessible pointers
+  //!    // for input and output
+  //!    int                num_items;    // e.g., 7
+  //!    int                *d_in;        // e.g., [8, 6, 7, 5, 3, 0, 9]
+  //!    int                *d_min_out;   // memory for the minimum value
+  //!    cuda::std::int64_t *d_index_out; // memory for the index of the returned value
+  //!    ...
+  //!
+  //!    // Determine temporary device storage requirements
+  //!    void     *d_temp_storage = nullptr;
+  //!    size_t   temp_storage_bytes = 0;
+  //!    cub::DeviceReduce::ArgMin(d_temp_storage, temp_storage_bytes, d_in, d_min_out, d_index_out,
+  //!    num_items);
+  //!
+  //!    // Allocate temporary storage
+  //!    cudaMalloc(&d_temp_storage, temp_storage_bytes);
+  //!
+  //!    // Run argmin-reduction
+  //!    cub::DeviceReduce::ArgMin(d_temp_storage, temp_storage_bytes, d_in, d_min_out, d_index_out,
+  //!    num_items);
+  //!
+  //!    // d_min_out   <-- 0
+  //!    // d_index_out <-- 5
+  //!
+  //! @endrst
+  //!
+  //! @tparam InputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input items
+  //!   (of some type `T`) @iterator
+  //!
+  //! @tparam ExtremumOutIteratorT
+  //!   **[inferred]** Output iterator type for recording minimum value
+  //!
+  //! @tparam IndexOutIteratorT
+  //!   **[inferred]** Output iterator type for recording index of the returned value
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in] d_in
+  //!   Iterator to the input sequence of data items
+  //!
+  //! @param[out] d_min_out
+  //!   Iterator to which the minimum value is written
+  //!
+  //! @param[out] d_index_out
+  //!   Iterator to which the index of the returned value is written
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_in`)
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename InputIteratorT, typename ExtremumOutIteratorT, typename IndexOutIteratorT>
+  CUB_RUNTIME_FUNCTION static cudaError_t ArgMin(
+    void* d_temp_storage,
+    size_t& temp_storage_bytes,
+    InputIteratorT d_in,
+    ExtremumOutIteratorT d_min_out,
+    IndexOutIteratorT d_index_out,
+    ::cuda::std::int64_t num_items,
+    cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceReduce::ArgMin");
+
+    // The input type
+    using InputValueT = cub::detail::it_value_t<InputIteratorT>;
+
+    // Offset type used within the kernel and to index within one partition
+    using PerPartitionOffsetT = int;
+
+    // Offset type used to index within the total input in the range [d_in, d_in + num_items)
+    using GlobalOffsetT = ::cuda::std::int64_t;
+
+    // The value type used for the extremum
+    using OutputExtremumT = detail::non_void_value_t<ExtremumOutIteratorT, InputValueT>;
+    using InitT           = OutputExtremumT;
+
+    // Reduction operation
+    using ReduceOpT = cub::ArgMin;
+
+    // Initial value
+    OutputExtremumT initial_value{::cuda::std::numeric_limits<InputValueT>::max()};
+
+    // Tabulate output iterator that unzips the result and writes it to the user-provided output iterators
+    auto out_it = THRUST_NS_QUALIFIER::make_tabulate_output_iterator(
+      detail::reduce::unzip_and_write_arg_extremum_op<ExtremumOutIteratorT, IndexOutIteratorT>{d_min_out, d_index_out});
+
+    return detail::reduce::dispatch_streaming_arg_reduce_t<
+      InputIteratorT,
+      decltype(out_it),
+      PerPartitionOffsetT,
+      GlobalOffsetT,
+      ReduceOpT,
+      InitT>::Dispatch(d_temp_storage,
+                       temp_storage_bytes,
+                       d_in,
+                       out_it,
+                       static_cast<GlobalOffsetT>(num_items),
+                       ReduceOpT{},
+                       initial_value,
+                       stream);
+  }
+
+  //! @rst
+  //! Finds the first device-wide minimum using the less-than (``<``) operator, also returning the index of that item.
+  //!
+  //! - The output value type of ``d_out`` is ``cub::KeyValuePair<int, T>``
+  //!   (assuming the value type of ``d_in`` is ``T``)
+  //!
+  //!   - The minimum is written to ``d_out.value`` and its offset in the input array is written to ``d_out.key``.
+  //!   - The ``{1, ::cuda::std::numeric_limits<T>::max()}`` tuple is produced for zero-length inputs
+  //!
+  //! - Does not support ``<`` operators that are non-commutative.
+  //! - Provides "run-to-run" determinism for pseudo-associative reduction
+  //!   (e.g., addition of floating point types) on the same GPU device.
+  //!   However, results for pseudo-associative reduction may be inconsistent
+  //!   from one device to a another device of a different compute-capability
+  //!   because CUB can employ different tile-sizing for different architectures.
+  //! - The range ``[d_in, d_in + num_items)`` shall not overlap `d_out`.
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates the argmin-reduction of a device vector
+  //! of ``int`` data elements.
+  //!
+  //! .. code-block:: c++
+  //!
+  //!    #include <cub/cub.cuh> // or equivalently <cub/device/device_reduce.cuh>
+  //!
+  //!    // Declare, allocate, and initialize device-accessible pointers
+  //!    // for input and output
+  //!    int                      num_items;      // e.g., 7
+  //!    int                      *d_in;          // e.g., [8, 6, 7, 5, 3, 0, 9]
+  //!    KeyValuePair<int, int>   *d_argmin;      // e.g., [{-,-}]
+  //!    ...
+  //!
+  //!    // Determine temporary device storage requirements
+  //!    void     *d_temp_storage = nullptr;
+  //!    size_t   temp_storage_bytes = 0;
+  //!    cub::DeviceReduce::ArgMin(d_temp_storage, temp_storage_bytes, d_in, d_argmin, num_items);
+  //!
+  //!    // Allocate temporary storage
+  //!    cudaMalloc(&d_temp_storage, temp_storage_bytes);
+  //!
+  //!    // Run argmin-reduction
+  //!    cub::DeviceReduce::ArgMin(d_temp_storage, temp_storage_bytes, d_in, d_argmin, num_items);
+  //!
+  //!    // d_argmin <-- [{5, 0}]
+  //!
+  //! @endrst
+  //!
+  //! @tparam InputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input items
+  //!   (of some type `T`) @iterator
+  //!
+  //! @tparam OutputIteratorT
+  //!   **[inferred]** Output iterator type for recording the reduced aggregate
+  //!   (having value type `cub::KeyValuePair<int, T>`) @iterator
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in] d_in
+  //!   Pointer to the input sequence of data items
+  //!
+  //! @param[out] d_out
+  //!   Pointer to the output aggregate
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_in`)
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename InputIteratorT, typename OutputIteratorT>
+  CCCL_DEPRECATED_BECAUSE("CUB has superseded this interface in favor of the ArgMin interface that takes two separate "
+                          "iterators: one iterator to which the extremum is written and another iterator to which the "
+                          "index of the found extremum is written. ")
+  CUB_RUNTIME_FUNCTION static cudaError_t
+    ArgMin(void* d_temp_storage,
+           size_t& temp_storage_bytes,
+           InputIteratorT d_in,
+           OutputIteratorT d_out,
+           int num_items,
+           cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceReduce::ArgMin");
+
+    // Signed integer type for global offsets
+    using OffsetT = int;
+
+    // The input type
+    using InputValueT = cub::detail::it_value_t<InputIteratorT>;
+
+    // The output tuple type
+    using OutputTupleT = cub::detail::non_void_value_t<OutputIteratorT, KeyValuePair<OffsetT, InputValueT>>;
+
+    using AccumT = OutputTupleT;
+
+    using InitT = detail::reduce::empty_problem_init_t<AccumT>;
+
+    // The output value type
+    using OutputValueT = typename OutputTupleT::Value;
+
+    // Wrapped input iterator to produce index-value <OffsetT, InputT> tuples
+    using ArgIndexInputIteratorT = ArgIndexInputIterator<InputIteratorT, OffsetT, OutputValueT>;
+
+    ArgIndexInputIteratorT d_indexed_in(d_in);
+
+    // Initial value
+    InitT initial_value{AccumT(1, ::cuda::std::numeric_limits<InputValueT>::max())};
+
+    return DispatchReduce<ArgIndexInputIteratorT, OutputIteratorT, OffsetT, cub::ArgMin, InitT, AccumT>::Dispatch(
+      d_temp_storage, temp_storage_bytes, d_indexed_in, d_out, num_items, cub::ArgMin(), initial_value, stream);
+  }
+
+  //! @rst
+  //! Computes a device-wide maximum using the greater-than (``>``) operator.
+  //!
+  //! - Uses ``::cuda::std::numeric_limits<T>::lowest()`` as the initial value of the reduction.
+  //! - Does not support ``>`` operators that are non-commutative.
+  //! - Provides "run-to-run" determinism for pseudo-associative reduction
+  //!   (e.g., addition of floating point types) on the same GPU device.
+  //!   However, results for pseudo-associative reduction may be inconsistent
+  //!   from one device to a another device of a different compute-capability
+  //!   because CUB can employ different tile-sizing for different architectures.
+  //! - The range ``[d_in, d_in + num_items)`` shall not overlap ``d_out``.
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates the max-reduction of a device vector of ``int`` data elements.
+  //!
+  //! .. code-block:: c++
+  //!
+  //!    #include <cub/cub.cuh> // or equivalently <cub/device/device_reduce.cuh>
+  //!
+  //!    // Declare, allocate, and initialize device-accessible pointers
+  //!    // for input and output
+  //!    int  num_items;      // e.g., 7
+  //!    int  *d_in;          // e.g., [8, 6, 7, 5, 3, 0, 9]
+  //!    int  *d_max;         // e.g., [-]
+  //!    ...
+  //!
+  //!    // Determine temporary device storage requirements
+  //!    void     *d_temp_storage = nullptr;
+  //!    size_t   temp_storage_bytes = 0;
+  //!    cub::DeviceReduce::Max(d_temp_storage, temp_storage_bytes, d_in, d_max, num_items);
+  //!
+  //!    // Allocate temporary storage
+  //!    cudaMalloc(&d_temp_storage, temp_storage_bytes);
+  //!
+  //!    // Run max-reduction
+  //!    cub::DeviceReduce::Max(d_temp_storage, temp_storage_bytes, d_in, d_max, num_items);
+  //!
+  //!    // d_max <-- [9]
+  //!
+  //! @endrst
+  //!
+  //! @tparam InputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input items @iterator
+  //!
+  //! @tparam OutputIteratorT
+  //!   **[inferred]** Output iterator type for recording the reduced aggregate @iterator
+  //!
+  //! @tparam NumItemsT
+  //!   **[inferred]** Type of num_items
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in] d_in
+  //!   Pointer to the input sequence of data items
+  //!
+  //! @param[out] d_out
+  //!   Pointer to the output aggregate
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_in`)
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename InputIteratorT, typename OutputIteratorT, typename NumItemsT>
+  CUB_RUNTIME_FUNCTION static cudaError_t
+  Max(void* d_temp_storage,
+      size_t& temp_storage_bytes,
+      InputIteratorT d_in,
+      OutputIteratorT d_out,
+      NumItemsT num_items,
+      cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceReduce::Max");
+
+    // Signed integer type for global offsets
+    using OffsetT = detail::choose_offset_t<NumItemsT>;
+
+    // The input value type
+    using InputT = cub::detail::it_value_t<InputIteratorT>;
+
+    using InitT = InputT;
+
+    return DispatchReduce<InputIteratorT, OutputIteratorT, OffsetT, ::cuda::maximum<>, InitT>::Dispatch(
+      d_temp_storage,
+      temp_storage_bytes,
+      d_in,
+      d_out,
+      static_cast<OffsetT>(num_items),
+      ::cuda::maximum<>{},
+      ::cuda::std::numeric_limits<InitT>::lowest(),
+      stream);
+  }
+
+  //! @rst
+  //! Finds the first device-wide maximum using the greater-than (``>``) operator and also returns the index of that
+  //! item.
+  //!
+  //! - The maximum is written to ``d_max_out``
+  //! - The offset of the returned item is written to ``d_index_out``, the offset type being written is of type
+  //!   ``cuda::std::int64_t``.
+  //! - For zero-length inputs, ``cuda::std::numeric_limits<T>::max()}`` is written to ``d_max_out``  and the index
+  //!   ``1`` is written to ``d_index_out``.
+  //! - Does not support ``>`` operators that are non-commutative.
+  //! - Provides "run-to-run" determinism for pseudo-associative reduction
+  //!   (e.g., addition of floating point types) on the same GPU device.
+  //!   However, results for pseudo-associative reduction may be inconsistent
+  //!   from one device to a another device of a different compute-capability
+  //!   because CUB can employ different tile-sizing for different architectures.
+  //! - The range ``[d_in, d_in + num_items)`` shall not overlap ``d_out``.
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates the argmax-reduction of a device vector
+  //! of `int` data elements.
+  //!
+  //! .. code-block:: c++
+  //!
+  //!    #include <cub/cub.cuh> // or equivalently <cub/device/device_reduce.cuh>
+  //!    #include <cuda/std/cstdint>
+  //!
+  //!    // Declare, allocate, and initialize device-accessible pointers
+  //!    // for input and output
+  //!    int                num_items;    // e.g., 7
+  //!    int                *d_in;        // e.g., [8, 6, 7, 5, 3, 0, 9]
+  //!    int                *d_max_out;   // memory for the maximum value
+  //!    cuda::std::int64_t *d_index_out; // memory for the index of the returned value
+  //!    ...
+  //!
+  //!    // Determine temporary device storage requirements
+  //!    void     *d_temp_storage = nullptr;
+  //!    size_t   temp_storage_bytes = 0;
+  //!    cub::DeviceReduce::ArgMax(
+  //!      d_temp_storage, temp_storage_bytes, d_in, d_max_out, d_index_out, num_items);
+  //!
+  //!    // Allocate temporary storage
+  //!    cudaMalloc(&d_temp_storage, temp_storage_bytes);
+  //!
+  //!    // Run argmax-reduction
+  //!    cub::DeviceReduce::ArgMax(
+  //!      d_temp_storage, temp_storage_bytes, d_in, d_max_out, d_index_out, num_items);
+  //!
+  //!    // d_max_out   <-- 9
+  //!    // d_index_out <-- 6
+  //!
+  //! @endrst
+  //!
+  //! @tparam InputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input items (of some type `T`) @iterator
+  //!
+  //! @tparam ExtremumOutIteratorT
+  //!   **[inferred]** Output iterator type for recording maximum value
+  //!
+  //! @tparam IndexOutIteratorT
+  //!   **[inferred]** Output iterator type for recording index of the returned value
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in] d_in
+  //!   Pointer to the input sequence of data items
+  //!
+  //! @param[out] d_max_out
+  //!   Iterator to which the maximum value is written
+  //!
+  //! @param[out] d_index_out
+  //!   Iterator to which the index of the returned value is written
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_in`)
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename InputIteratorT, typename ExtremumOutIteratorT, typename IndexOutIteratorT>
+  CUB_RUNTIME_FUNCTION static cudaError_t ArgMax(
+    void* d_temp_storage,
+    size_t& temp_storage_bytes,
+    InputIteratorT d_in,
+    ExtremumOutIteratorT d_max_out,
+    IndexOutIteratorT d_index_out,
+    ::cuda::std::int64_t num_items,
+    cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceReduce::ArgMax");
+
+    // The input type
+    using InputValueT = cub::detail::it_value_t<InputIteratorT>;
+
+    // Offset type used within the kernel and to index within one partition
+    using PerPartitionOffsetT = int;
+
+    // Offset type used to index within the total input in the range [d_in, d_in + num_items)
+    using GlobalOffsetT = ::cuda::std::int64_t;
+
+    // The value type used for the extremum
+    using OutputExtremumT = detail::non_void_value_t<ExtremumOutIteratorT, InputValueT>;
+    using InitT           = OutputExtremumT;
+
+    // Reduction operation
+    using ReduceOpT = cub::ArgMax;
+
+    // Initial value
+    OutputExtremumT initial_value{::cuda::std::numeric_limits<InputValueT>::lowest()};
+
+    // Tabulate output iterator that unzips the result and writes it to the user-provided output iterators
+    auto out_it = THRUST_NS_QUALIFIER::make_tabulate_output_iterator(
+      detail::reduce::unzip_and_write_arg_extremum_op<ExtremumOutIteratorT, IndexOutIteratorT>{d_max_out, d_index_out});
+
+    return detail::reduce::dispatch_streaming_arg_reduce_t<
+      InputIteratorT,
+      decltype(out_it),
+      PerPartitionOffsetT,
+      GlobalOffsetT,
+      ReduceOpT,
+      InitT>::Dispatch(d_temp_storage,
+                       temp_storage_bytes,
+                       d_in,
+                       out_it,
+                       static_cast<GlobalOffsetT>(num_items),
+                       ReduceOpT{},
+                       initial_value,
+                       stream);
+  }
+
+  //! @rst
+  //! Finds the first device-wide maximum using the greater-than (``>``)
+  //! operator, also returning the index of that item
+  //!
+  //! - The output value type of ``d_out`` is ``cub::KeyValuePair<int, T>``
+  //!   (assuming the value type of ``d_in`` is ``T``)
+  //!
+  //!   - The maximum is written to ``d_out.value`` and its offset in the input
+  //!     array is written to ``d_out.key``.
+  //!   - The ``{1, ::cuda::std::numeric_limits<T>::lowest()}`` tuple is produced for zero-length inputs
+  //!
+  //! - Does not support ``>`` operators that are non-commutative.
+  //! - Provides "run-to-run" determinism for pseudo-associative reduction
+  //!   (e.g., addition of floating point types) on the same GPU device.
+  //!   However, results for pseudo-associative reduction may be inconsistent
+  //!   from one device to a another device of a different compute-capability
+  //!   because CUB can employ different tile-sizing for different architectures.
+  //! - The range ``[d_in, d_in + num_items)`` shall not overlap ``d_out``.
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates the argmax-reduction of a device vector
+  //! of `int` data elements.
+  //!
+  //! .. code-block:: c++
+  //!
+  //!    #include <cub/cub.cuh>
+  //!    // or equivalently <cub/device/device_reduce.cuh>
+  //!
+  //!    // Declare, allocate, and initialize device-accessible pointers
+  //!    // for input and output
+  //!    int                      num_items;      // e.g., 7
+  //!    int                      *d_in;          // e.g., [8, 6, 7, 5, 3, 0, 9]
+  //!    KeyValuePair<int, int>   *d_argmax;      // e.g., [{-,-}]
+  //!    ...
+  //!
+  //!    // Determine temporary device storage requirements
+  //!    void     *d_temp_storage = nullptr;
+  //!    size_t   temp_storage_bytes = 0;
+  //!    cub::DeviceReduce::ArgMax(
+  //!      d_temp_storage, temp_storage_bytes, d_in, d_argmax, num_items);
+  //!
+  //!    // Allocate temporary storage
+  //!    cudaMalloc(&d_temp_storage, temp_storage_bytes);
+  //!
+  //!    // Run argmax-reduction
+  //!    cub::DeviceReduce::ArgMax(
+  //!      d_temp_storage, temp_storage_bytes, d_in, d_argmax, num_items);
+  //!
+  //!    // d_argmax <-- [{6, 9}]
+  //!
+  //! @endrst
+  //!
+  //! @tparam InputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input items (of some type `T`) @iterator
+  //!
+  //! @tparam OutputIteratorT
+  //!   **[inferred]** Output iterator type for recording the reduced aggregate
+  //!   (having value type `cub::KeyValuePair<int, T>`) @iterator
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in] d_in
+  //!   Pointer to the input sequence of data items
+  //!
+  //! @param[out] d_out
+  //!   Pointer to the output aggregate
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_in`)
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename InputIteratorT, typename OutputIteratorT>
+  CCCL_DEPRECATED_BECAUSE("CUB has superseded this interface in favor of the ArgMax interface that takes two separate "
+                          "iterators: one iterator to which the extremum is written and another iterator to which the "
+                          "index of the found extremum is written. ")
+  CUB_RUNTIME_FUNCTION static cudaError_t
+    ArgMax(void* d_temp_storage,
+           size_t& temp_storage_bytes,
+           InputIteratorT d_in,
+           OutputIteratorT d_out,
+           int num_items,
+           cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceReduce::ArgMax");
+
+    // Signed integer type for global offsets
+    using OffsetT = int;
+
+    // The input type
+    using InputValueT = cub::detail::it_value_t<InputIteratorT>;
+
+    // The output tuple type
+    using OutputTupleT = cub::detail::non_void_value_t<OutputIteratorT, KeyValuePair<OffsetT, InputValueT>>;
+
+    using AccumT = OutputTupleT;
+
+    // The output value type
+    using OutputValueT = typename OutputTupleT::Value;
+
+    using InitT = detail::reduce::empty_problem_init_t<AccumT>;
+
+    // Wrapped input iterator to produce index-value <OffsetT, InputT> tuples
+    using ArgIndexInputIteratorT = ArgIndexInputIterator<InputIteratorT, OffsetT, OutputValueT>;
+
+    ArgIndexInputIteratorT d_indexed_in(d_in);
+
+    // Initial value
+    InitT initial_value{AccumT(1, ::cuda::std::numeric_limits<InputValueT>::lowest())};
+
+    return DispatchReduce<ArgIndexInputIteratorT, OutputIteratorT, OffsetT, cub::ArgMax, InitT, AccumT>::Dispatch(
+      d_temp_storage, temp_storage_bytes, d_indexed_in, d_out, num_items, cub::ArgMax(), initial_value, stream);
+  }
+
+  //! @rst
+  //! Fuses transform and reduce operations
+  //!
+  //! - Does not support binary reduction operators that are non-commutative.
+  //! - Provides "run-to-run" determinism for pseudo-associative reduction
+  //!   (e.g., addition of floating point types) on the same GPU device.
+  //!   However, results for pseudo-associative reduction may be inconsistent
+  //!   from one device to a another device of a different compute-capability
+  //!   because CUB can employ different tile-sizing for different architectures.
+  //! - The range ``[d_in, d_in + num_items)`` shall not overlap ``d_out``.
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates a user-defined min-reduction of a
+  //! device vector of `int` data elements.
+  //!
+  //! .. code-block:: c++
+  //!
+  //!    #include <cub/cub.cuh>
+  //!    // or equivalently <cub/device/device_reduce.cuh>
+  //!
+  //!    thrust::device_vector<int> in = { 1, 2, 3, 4 };
+  //!    thrust::device_vector<int> out(1);
+  //!
+  //!    size_t temp_storage_bytes = 0;
+  //!    uint8_t *d_temp_storage = nullptr;
+  //!
+  //!    const int init = 42;
+  //!
+  //!    cub::DeviceReduce::TransformReduce(
+  //!      d_temp_storage,
+  //!      temp_storage_bytes,
+  //!      in.begin(),
+  //!      out.begin(),
+  //!      in.size(),
+  //!      cuda::std::plus<>{},
+  //!      square_t{},
+  //!      init);
+  //!
+  //!    thrust::device_vector<uint8_t> temp_storage(temp_storage_bytes);
+  //!    d_temp_storage = temp_storage.data().get();
+  //!
+  //!    cub::DeviceReduce::TransformReduce(
+  //!      d_temp_storage,
+  //!      temp_storage_bytes,
+  //!      in.begin(),
+  //!      out.begin(),
+  //!      in.size(),
+  //!      cuda::std::plus<>{},
+  //!      square_t{},
+  //!      init);
+  //!
+  //!    // out[0] <-- 72
+  //!
+  //! @endrst
+  //!
+  //! @tparam InputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input items @iterator
+  //!
+  //! @tparam OutputIteratorT
+  //!   **[inferred]** Output iterator type for recording the reduced aggregate @iterator
+  //!
+  //! @tparam ReductionOpT
+  //!   **[inferred]** Binary reduction functor type having member `T operator()(const T &a, const T &b)`
+  //!
+  //! @tparam TransformOpT
+  //!   **[inferred]** Unary reduction functor type having member `auto operator()(const T &a)`
+  //!
+  //! @tparam T
+  //!   **[inferred]** Data element type that is convertible to the `value` type of `InputIteratorT`
+  //!
+  //! @tparam NumItemsT
+  //!   **[inferred]** Type of num_items
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in] d_in
+  //!   Pointer to the input sequence of data items
+  //!
+  //! @param[out] d_out
+  //!   Pointer to the output aggregate
+  //!
+  //! @param[in] num_items
+  //!   Total number of input items (i.e., length of `d_in`)
+  //!
+  //! @param[in] reduction_op
+  //!   Binary reduction functor
+  //!
+  //! @param[in] transform_op
+  //!   Unary transform functor
+  //!
+  //! @param[in] init
+  //!   Initial value of the reduction
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename InputIteratorT,
+            typename OutputIteratorT,
+            typename ReductionOpT,
+            typename TransformOpT,
+            typename T,
+            typename NumItemsT>
+  CUB_RUNTIME_FUNCTION static cudaError_t TransformReduce(
+    void* d_temp_storage,
+    size_t& temp_storage_bytes,
+    InputIteratorT d_in,
+    OutputIteratorT d_out,
+    NumItemsT num_items,
+    ReductionOpT reduction_op,
+    TransformOpT transform_op,
+    T init,
+    cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceReduce::TransformReduce");
+
+    using OffsetT = detail::choose_offset_t<NumItemsT>;
+
+    return DispatchTransformReduce<InputIteratorT, OutputIteratorT, OffsetT, ReductionOpT, TransformOpT, T>::Dispatch(
+      d_temp_storage,
+      temp_storage_bytes,
+      d_in,
+      d_out,
+      static_cast<OffsetT>(num_items),
+      reduction_op,
+      init,
+      stream,
+      transform_op);
+  }
+
+  //! @rst
+  //! Reduces segments of values, where segments are demarcated by corresponding runs of identical keys.
+  //!
+  //! This operation computes segmented reductions within ``d_values_in`` using the specified binary ``reduction_op``
+  //! functor. The segments are identified by "runs" of corresponding keys in `d_keys_in`, where runs are maximal
+  //! ranges of consecutive, identical keys. For the *i*\ :sup:`th` run encountered, the first key of the run and
+  //! the corresponding value aggregate of that run are written to ``d_unique_out[i]`` and ``d_aggregates_out[i]``,
+  //! respectively. The total number of runs encountered is written to ``d_num_runs_out``.
+  //!
+  //! - The ``==`` equality operator is used to determine whether keys are equivalent
+  //! - Provides "run-to-run" determinism for pseudo-associative reduction
+  //!   (e.g., addition of floating point types) on the same GPU device.
+  //!   However, results for pseudo-associative reduction may be inconsistent
+  //!   from one device to a another device of a different compute-capability
+  //!   because CUB can employ different tile-sizing for different architectures.
+  //! - Let ``out`` be any of
+  //!   ``[d_unique_out, d_unique_out + *d_num_runs_out)``
+  //!   ``[d_aggregates_out, d_aggregates_out + *d_num_runs_out)``
+  //!   ``d_num_runs_out``. The ranges represented by ``out`` shall not overlap
+  //!   ``[d_keys_in, d_keys_in + num_items)``,
+  //!   ``[d_values_in, d_values_in + num_items)`` nor ``out`` in any way.
+  //! - @devicestorage
+  //!
+  //! Snippet
+  //! +++++++++++++++++++++++++++++++++++++++++++++
+  //!
+  //! The code snippet below illustrates the segmented reduction of ``int`` values grouped by runs of
+  //! associated ``int`` keys.
+  //!
+  //! .. code-block:: c++
+  //!
+  //!    #include <cub/cub.cuh>
+  //!    // or equivalently <cub/device/device_reduce.cuh>
+  //!
+  //!    // CustomMin functor
+  //!    struct CustomMin
+  //!    {
+  //!        template <typename T>
+  //!        __device__ __forceinline__
+  //!        T operator()(const T &a, const T &b) const {
+  //!            return (b < a) ? b : a;
+  //!        }
+  //!    };
+  //!
+  //!    // Declare, allocate, and initialize device-accessible pointers
+  //!    // for input and output
+  //!    int          num_items;          // e.g., 8
+  //!    int          *d_keys_in;         // e.g., [0, 2, 2, 9, 5, 5, 5, 8]
+  //!    int          *d_values_in;       // e.g., [0, 7, 1, 6, 2, 5, 3, 4]
+  //!    int          *d_unique_out;      // e.g., [-, -, -, -, -, -, -, -]
+  //!    int          *d_aggregates_out;  // e.g., [-, -, -, -, -, -, -, -]
+  //!    int          *d_num_runs_out;    // e.g., [-]
+  //!    CustomMin    reduction_op;
+  //!    ...
+  //!
+  //!    // Determine temporary device storage requirements
+  //!    void     *d_temp_storage = nullptr;
+  //!    size_t   temp_storage_bytes = 0;
+  //!    cub::DeviceReduce::ReduceByKey(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_keys_in, d_unique_out, d_values_in,
+  //!      d_aggregates_out, d_num_runs_out, reduction_op, num_items);
+  //!
+  //!    // Allocate temporary storage
+  //!    cudaMalloc(&d_temp_storage, temp_storage_bytes);
+  //!
+  //!    // Run reduce-by-key
+  //!    cub::DeviceReduce::ReduceByKey(
+  //!      d_temp_storage, temp_storage_bytes,
+  //!      d_keys_in, d_unique_out, d_values_in,
+  //!      d_aggregates_out, d_num_runs_out, reduction_op, num_items);
+  //!
+  //!    // d_unique_out      <-- [0, 2, 9, 5, 8]
+  //!    // d_aggregates_out  <-- [0, 1, 6, 2, 4]
+  //!    // d_num_runs_out    <-- [5]
+  //!
+  //! @endrst
+  //!
+  //! @tparam KeysInputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input keys @iterator
+  //!
+  //! @tparam UniqueOutputIteratorT
+  //!   **[inferred]** Random-access output iterator type for writing unique output keys @iterator
+  //!
+  //! @tparam ValuesInputIteratorT
+  //!   **[inferred]** Random-access input iterator type for reading input values @iterator
+  //!
+  //! @tparam AggregatesOutputIterator
+  //!   **[inferred]** Random-access output iterator type for writing output value aggregates @iterator
+  //!
+  //! @tparam NumRunsOutputIteratorT
+  //!   **[inferred]** Output iterator type for recording the number of runs encountered @iterator
+  //!
+  //! @tparam ReductionOpT
+  //!   **[inferred]** Binary reduction functor type having member `T operator()(const T &a, const T &b)`
+  //!
+  //! @tparam NumItemsT
+  //!   **[inferred]** Type of num_items
+  //!
+  //! @param[in] d_temp_storage
+  //!   Device-accessible allocation of temporary storage. When `nullptr`, the
+  //!   required allocation size is written to `temp_storage_bytes` and no work is done.
+  //!
+  //! @param[in,out] temp_storage_bytes
+  //!   Reference to size in bytes of `d_temp_storage` allocation
+  //!
+  //! @param[in] d_keys_in
+  //!   Pointer to the input sequence of keys
+  //!
+  //! @param[out] d_unique_out
+  //!   Pointer to the output sequence of unique keys (one key per run)
+  //!
+  //! @param[in] d_values_in
+  //!   Pointer to the input sequence of corresponding values
+  //!
+  //! @param[out] d_aggregates_out
+  //!   Pointer to the output sequence of value aggregates
+  //!   (one aggregate per run)
+  //!
+  //! @param[out] d_num_runs_out
+  //!   Pointer to total number of runs encountered
+  //!   (i.e., the length of `d_unique_out`)
+  //!
+  //! @param[in] reduction_op
+  //!   Binary reduction functor
+  //!
+  //! @param[in] num_items
+  //!   Total number of associated key+value pairs
+  //!   (i.e., the length of `d_in_keys` and `d_in_values`)
+  //!
+  //! @param[in] stream
+  //!   @rst
+  //!   **[optional]** CUDA stream to launch kernels within. Default is stream\ :sub:`0`.
+  //!   @endrst
+  template <typename KeysInputIteratorT,
+            typename UniqueOutputIteratorT,
+            typename ValuesInputIteratorT,
+            typename AggregatesOutputIteratorT,
+            typename NumRunsOutputIteratorT,
+            typename ReductionOpT,
+            typename NumItemsT>
+  CUB_RUNTIME_FUNCTION _CCCL_FORCEINLINE static cudaError_t ReduceByKey(
+    void* d_temp_storage,
+    size_t& temp_storage_bytes,
+    KeysInputIteratorT d_keys_in,
+    UniqueOutputIteratorT d_unique_out,
+    ValuesInputIteratorT d_values_in,
+    AggregatesOutputIteratorT d_aggregates_out,
+    NumRunsOutputIteratorT d_num_runs_out,
+    ReductionOpT reduction_op,
+    NumItemsT num_items,
+    cudaStream_t stream = 0)
+  {
+    _CCCL_NVTX_RANGE_SCOPE_IF(d_temp_storage, "cub::DeviceReduce::ReduceByKey");
+
+    // Signed integer type for global offsets
+    using OffsetT = detail::choose_offset_t<NumItemsT>;
+
+    // FlagT iterator type (not used)
+
+    // Selection op (not used)
+
+    // Default == operator
+    using EqualityOp = ::cuda::std::equal_to<>;
+
+    return DispatchReduceByKey<
+      KeysInputIteratorT,
+      UniqueOutputIteratorT,
+      ValuesInputIteratorT,
+      AggregatesOutputIteratorT,
+      NumRunsOutputIteratorT,
+      EqualityOp,
+      ReductionOpT,
+      OffsetT>::Dispatch(d_temp_storage,
+                         temp_storage_bytes,
+                         d_keys_in,
+                         d_unique_out,
+                         d_values_in,
+                         d_aggregates_out,
+                         d_num_runs_out,
+                         EqualityOp(),
+                         reduction_op,
+                         static_cast<OffsetT>(num_items),
+                         stream);
+  }
+};
+
+CUB_NAMESPACE_END