cuda-cccl 0.1.3.1.0.dev1486__cp310-cp310-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl

cuda/cccl/headers/include/cub/agent/agent_select_if.cuh

@@ -0,0 +1,1032 @@
+/******************************************************************************
+ * Copyright (c) 2011, Duane Merrill.  All rights reserved.
+ * Copyright (c) 2011-2018, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the NVIDIA CORPORATION nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NVIDIA CORPORATION BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************/
+
+/**
+ * \file
+ * cub::AgentSelectIf implements a stateful abstraction of CUDA thread blocks for participating in device-wide select.
+ */
+
+#pragma once
+
+#include <cub/config.cuh>
+
+#if defined(_CCCL_IMPLICIT_SYSTEM_HEADER_GCC)
+#  pragma GCC system_header
+#elif defined(_CCCL_IMPLICIT_SYSTEM_HEADER_CLANG)
+#  pragma clang system_header
+#elif defined(_CCCL_IMPLICIT_SYSTEM_HEADER_MSVC)
+#  pragma system_header
+#endif // no system header
+
+#include <cub/agent/single_pass_scan_operators.cuh>
+#include <cub/block/block_discontinuity.cuh>
+#include <cub/block/block_exchange.cuh>
+#include <cub/block/block_load.cuh>
+#include <cub/block/block_scan.cuh>
+#include <cub/block/block_store.cuh>
+#include <cub/device/dispatch/dispatch_common.cuh>
+#include <cub/grid/grid_queue.cuh>
+#include <cub/iterator/cache_modified_input_iterator.cuh>
+#include <cub/util_type.cuh>
+
+#include <cuda/std/type_traits>
+
+CUB_NAMESPACE_BEGIN
+
+/******************************************************************************
+ * Tuning policy types
+ ******************************************************************************/
+
+/**
+ * Parameterizable tuning policy type for AgentSelectIf
+ *
+ * @tparam _BLOCK_THREADS
+ *   Threads per thread block
+ *
+ * @tparam _ITEMS_PER_THREAD
+ *   Items per thread (per tile of input)
+ *
+ * @tparam _LOAD_ALGORITHM
+ *   The BlockLoad algorithm to use
+ *
+ * @tparam _LOAD_MODIFIER
+ *   Cache load modifier for reading input elements
+ *
+ * @tparam _SCAN_ALGORITHM
+ *   The BlockScan algorithm to use
+ *
+ * @tparam DelayConstructorT
+ *   Implementation detail, do not specify directly, requirements on the
+ *   content of this type are subject to breaking change.
+ */
+template <int _BLOCK_THREADS,
+          int _ITEMS_PER_THREAD,
+          BlockLoadAlgorithm _LOAD_ALGORITHM,
+          CacheLoadModifier _LOAD_MODIFIER,
+          BlockScanAlgorithm _SCAN_ALGORITHM,
+          typename DelayConstructorT = detail::fixed_delay_constructor_t<350, 450>>
+struct AgentSelectIfPolicy
+{
+  enum
+  {
+    /// Threads per thread block
+    BLOCK_THREADS = _BLOCK_THREADS,
+
+    /// Items per thread (per tile of input)
+    ITEMS_PER_THREAD = _ITEMS_PER_THREAD,
+  };
+
+  /// The BlockLoad algorithm to use
+  static constexpr BlockLoadAlgorithm LOAD_ALGORITHM = _LOAD_ALGORITHM;
+
+  /// Cache load modifier for reading input elements
+  static constexpr CacheLoadModifier LOAD_MODIFIER = _LOAD_MODIFIER;
+
+  /// The BlockScan algorithm to use
+  static constexpr BlockScanAlgorithm SCAN_ALGORITHM = _SCAN_ALGORITHM;
+
+  struct detail
+  {
+    using delay_constructor_t = DelayConstructorT;
+  };
+};
+
+/******************************************************************************
+ * Thread block abstractions
+ ******************************************************************************/
+
+namespace detail
+{
+namespace select
+{
+
+template <typename SelectedOutputItT, typename RejectedOutputItT>
+struct partition_distinct_output_t
+{
+  using selected_iterator_t = SelectedOutputItT;
+  using rejected_iterator_t = RejectedOutputItT;
+
+  selected_iterator_t selected_it;
+  rejected_iterator_t rejected_it;
+};
+
+template <typename OutputIterator>
+struct is_partition_distinct_output_t : ::cuda::std::false_type
+{};
+
+template <typename SelectedOutputItT, typename RejectedOutputItT>
+struct is_partition_distinct_output_t<partition_distinct_output_t<SelectedOutputItT, RejectedOutputItT>>
+    : ::cuda::std::true_type
+{};
+
+/**
+ * @brief AgentSelectIf implements a stateful abstraction of CUDA thread blocks for participating in
+ * device-wide selection
+ *
+ * Performs functor-based selection if SelectOpT functor type != NullType
+ * Otherwise performs flag-based selection if FlagsInputIterator's value type != NullType
+ * Otherwise performs discontinuity selection (keep unique)
+ *
+ * @tparam AgentSelectIfPolicyT
+ *   Parameterized AgentSelectIfPolicy tuning policy type
+ *
+ * @tparam InputIteratorT
+ *   Random-access input iterator type for selection items
+ *
+ * @tparam FlagsInputIteratorT
+ *   Random-access input iterator type for selections (NullType* if a selection functor or
+ *   discontinuity flagging is to be used for selection)
+ *
+ * @tparam OutputIteratorWrapperT
+ *   Either a random-access iterator or an instance of the `partition_distinct_output_t` template.
+ *
+ * @tparam SelectOpT
+ *   Selection operator type (NullType if selections or discontinuity flagging is to be used for
+ * selection)
+ *
+ * @tparam EqualityOpT
+ *   Equality operator type (NullType if selection functor or selections is to be used for
+ * selection)
+ *
+ * @tparam OffsetT
+ *   Signed integer type for offsets within a partition
+ *
+ * @tparam StreamingContextT
+ *   Type providing the context information for the current partition, with the following member functions:
+ *    input_offset() -> base offset for the input (and flags) iterator
+ *    is_first_partition() -> [Select::Unique-only] whether this is the first partition
+ *    num_previously_selected() -> base offset for the output iterator for selected items
+ *    num_previously_rejected() -> base offset for the output iterator for rejected items (partition only)
+ *    num_total_items() -> total number of items across all partitions (partition only)
+ *    update_num_selected(d_num_sel_out, num_selected) -> invoked by last CTA with number of selected
+ *
+ * @tparam SelectImpl SelectionOpt
+ *   SelectImpl indicating whether to partition, just selection or selection where the memory for the input and
+ *   output may alias each other.
+ */
+template <typename AgentSelectIfPolicyT,
+          typename InputIteratorT,
+          typename FlagsInputIteratorT,
+          typename OutputIteratorWrapperT,
+          typename SelectOpT,
+          typename EqualityOpT,
+          typename OffsetT,
+          typename StreamingContextT,
+          SelectImpl SelectionOpt>
+struct AgentSelectIf
+{
+  //---------------------------------------------------------------------
+  // Types and constants
+  //---------------------------------------------------------------------
+  using ScanTileStateT = ScanTileState<OffsetT>;
+
+  // Indicates whether the BlockLoad algorithm uses shared memory to load or exchange the data
+  static constexpr bool loads_via_smem =
+    !(AgentSelectIfPolicyT::LOAD_ALGORITHM == BLOCK_LOAD_DIRECT
+      || AgentSelectIfPolicyT::LOAD_ALGORITHM == BLOCK_LOAD_STRIPED
+      || AgentSelectIfPolicyT::LOAD_ALGORITHM == BLOCK_LOAD_VECTORIZE);
+
+  // If this may be an *in-place* stream compaction, we need to ensure that all of a tile's items have been loaded
+  // before signalling a subsequent thread block's partial or inclusive state, hence we need a store release when
+  // updating a tile state. Similarly, we need to make sure that the load of previous tile states precede writing of
+  // the stream-compacted items and, hence, we need a load acquire when reading those tile states.
+  static constexpr MemoryOrder memory_order =
+    ((SelectionOpt == SelectImpl::SelectPotentiallyInPlace) && (!loads_via_smem))
+      ? MemoryOrder::acquire_release
+      : MemoryOrder::relaxed;
+
+  // If we need to enforce memory order for in-place stream compaction, wrap the default decoupled look-back tile
+  // state in a helper class that enforces memory order on reads and writes
+  using MemoryOrderedTileStateT = tile_state_with_memory_order<ScanTileStateT, memory_order>;
+
+  // The input value type
+  using InputT = it_value_t<InputIteratorT>;
+
+  // The flag value type
+  using FlagT = it_value_t<FlagsInputIteratorT>;
+
+  // Constants
+  enum
+  {
+    USE_SELECT_OP,
+    USE_SELECT_FLAGS,
+    USE_DISCONTINUITY,
+    USE_STENCIL_WITH_OP
+  };
+
+  static constexpr ::cuda::std::int32_t BLOCK_THREADS    = AgentSelectIfPolicyT::BLOCK_THREADS;
+  static constexpr ::cuda::std::int32_t ITEMS_PER_THREAD = AgentSelectIfPolicyT::ITEMS_PER_THREAD;
+  static constexpr ::cuda::std::int32_t TILE_ITEMS       = BLOCK_THREADS * ITEMS_PER_THREAD;
+  static constexpr bool TWO_PHASE_SCATTER                = (ITEMS_PER_THREAD > 1);
+
+  static constexpr bool has_select_op       = (!::cuda::std::is_same_v<SelectOpT, NullType>);
+  static constexpr bool has_flags_it        = (!::cuda::std::is_same_v<FlagT, NullType>);
+  static constexpr bool use_stencil_with_op = has_select_op && has_flags_it;
+  static constexpr auto SELECT_METHOD =
+    use_stencil_with_op ? USE_STENCIL_WITH_OP
+    : has_select_op     ? USE_SELECT_OP
+    : has_flags_it      ? USE_SELECT_FLAGS
+                        : USE_DISCONTINUITY;
+
+  // Cache-modified Input iterator wrapper type (for applying cache modifier) for items
+  // Wrap the native input pointer with CacheModifiedValuesInputIterator
+  // or directly use the supplied input iterator type
+  using WrappedInputIteratorT =
+    ::cuda::std::_If<::cuda::std::is_pointer_v<InputIteratorT>,
+                     CacheModifiedInputIterator<AgentSelectIfPolicyT::LOAD_MODIFIER, InputT, OffsetT>,
+                     InputIteratorT>;
+
+  // Cache-modified Input iterator wrapper type (for applying cache modifier) for values
+  // Wrap the native input pointer with CacheModifiedValuesInputIterator
+  // or directly use the supplied input iterator type
+  using WrappedFlagsInputIteratorT =
+    ::cuda::std::_If<::cuda::std::is_pointer_v<FlagsInputIteratorT>,
+                     CacheModifiedInputIterator<AgentSelectIfPolicyT::LOAD_MODIFIER, FlagT, OffsetT>,
+                     FlagsInputIteratorT>;
+
+  // Parameterized BlockLoad type for input data
+  using BlockLoadT = BlockLoad<InputT, BLOCK_THREADS, ITEMS_PER_THREAD, AgentSelectIfPolicyT::LOAD_ALGORITHM>;
+
+  // Parameterized BlockLoad type for flags
+  using BlockLoadFlags = BlockLoad<FlagT, BLOCK_THREADS, ITEMS_PER_THREAD, AgentSelectIfPolicyT::LOAD_ALGORITHM>;
+
+  // Parameterized BlockDiscontinuity type for items
+  using BlockDiscontinuityT = BlockDiscontinuity<InputT, BLOCK_THREADS>;
+
+  // Parameterized BlockScan type
+  using BlockScanT = BlockScan<OffsetT, BLOCK_THREADS, AgentSelectIfPolicyT::SCAN_ALGORITHM>;
+
+  // Callback type for obtaining tile prefix during block scan
+  using DelayConstructorT = typename AgentSelectIfPolicyT::detail::delay_constructor_t;
+  using TilePrefixCallbackOpT =
+    TilePrefixCallbackOp<OffsetT, ::cuda::std::plus<>, MemoryOrderedTileStateT, DelayConstructorT>;
+
+  // Item exchange type
+  using ItemExchangeT = InputT[TILE_ITEMS];
+
+  // Shared memory type for this thread block
+  union _TempStorage
+  {
+    struct ScanStorage
+    {
+      // Smem needed for tile scanning
+      typename BlockScanT::TempStorage scan;
+
+      // Smem needed for cooperative prefix callback
+      typename TilePrefixCallbackOpT::TempStorage prefix;
+
+      // Smem needed for discontinuity detection
+      typename BlockDiscontinuityT::TempStorage discontinuity;
+    } scan_storage;
+
+    // Smem needed for loading items
+    typename BlockLoadT::TempStorage load_items;
+
+    // Smem needed for loading values
+    typename BlockLoadFlags::TempStorage load_flags;
+
+    // Smem needed for compacting items (allows non POD items in this union)
+    Uninitialized<ItemExchangeT> raw_exchange;
+  };
+
+  // Alias wrapper allowing storage to be unioned
+  struct TempStorage : Uninitialized<_TempStorage>
+  {};
+
+  //---------------------------------------------------------------------
+  // Per-thread fields
+  //---------------------------------------------------------------------
+
+  _TempStorage& temp_storage; ///< Reference to temp_storage
+  WrappedInputIteratorT d_in; ///< Input items
+  OutputIteratorWrapperT d_selected_out; ///< Output iterator for the selected items
+  WrappedFlagsInputIteratorT d_flags_in; ///< Input selection flags (if applicable)
+  InequalityWrapper<EqualityOpT> inequality_op; ///< T inequality operator
+  SelectOpT select_op; ///< Selection operator
+  OffsetT num_items; ///< Total number of input items
+
+  // Note: This is a const reference because we have seen double-digit percentage perf regressions otherwise
+  const StreamingContextT& streaming_context; ///< Context for the current partition
+
+  //---------------------------------------------------------------------
+  // Constructor
+  //---------------------------------------------------------------------
+
+  /**
+   * @param temp_storage
+   *   Reference to temp_storage
+   *
+   * @param d_in
+   *   Input data
+   *
+   * @param d_flags_in
+   *   Input selection flags (if applicable)
+   *
+   * @param d_selected_out
+   *   Output data
+   *
+   * @param select_op
+   *   Selection operator
+   *
+   * @param equality_op
+   *   Equality operator
+   *
+   * @param num_items
+   *   Total number of input items
+   *
+   * @param streaming_context
+   *   Context for the current partition
+   */
+  _CCCL_DEVICE _CCCL_FORCEINLINE AgentSelectIf(
+    TempStorage& temp_storage,
+    InputIteratorT d_in,
+    FlagsInputIteratorT d_flags_in,
+    OutputIteratorWrapperT d_selected_out,
+    SelectOpT select_op,
+    EqualityOpT equality_op,
+    OffsetT num_items,
+    const StreamingContextT& streaming_context)
+      : temp_storage(temp_storage.Alias())
+      , d_in(d_in)
+      , d_selected_out(d_selected_out)
+      , d_flags_in(d_flags_in)
+      , inequality_op(equality_op)
+      , select_op(select_op)
+      , num_items(num_items)
+      , streaming_context(streaming_context)
+  {}
+
+  //---------------------------------------------------------------------
+  // Utility methods for initializing the selections
+  //---------------------------------------------------------------------
+
+  /**
+   * Initialize selections (specialized for selection operator)
+   */
+  template <bool IS_FIRST_TILE, bool IS_LAST_TILE>
+  _CCCL_DEVICE _CCCL_FORCEINLINE void InitializeSelections(
+    OffsetT /*tile_offset*/,
+    OffsetT num_tile_items,
+    InputT (&items)[ITEMS_PER_THREAD],
+    OffsetT (&selection_flags)[ITEMS_PER_THREAD],
+    constant_t<USE_SELECT_OP> /*select_method*/)
+  {
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (int ITEM = 0; ITEM < ITEMS_PER_THREAD; ++ITEM)
+    {
+      // Out-of-bounds items are selection_flags
+      selection_flags[ITEM] = 1;
+
+      if (!IS_LAST_TILE || (static_cast<OffsetT>(threadIdx.x * ITEMS_PER_THREAD + ITEM) < num_tile_items))
+      {
+        selection_flags[ITEM] = static_cast<bool>(select_op(items[ITEM]));
+      }
+    }
+  }
+
+  /**
+   * Initialize selections (specialized for selection_op applied to d_flags_in)
+   */
+  template <bool IS_FIRST_TILE, bool IS_LAST_TILE>
+  _CCCL_DEVICE _CCCL_FORCEINLINE void InitializeSelections(
+    OffsetT tile_offset,
+    OffsetT num_tile_items,
+    InputT (& /*items*/)[ITEMS_PER_THREAD],
+    OffsetT (&selection_flags)[ITEMS_PER_THREAD],
+    constant_t<USE_STENCIL_WITH_OP> /*select_method*/)
+  {
+    __syncthreads();
+
+    FlagT flags[ITEMS_PER_THREAD];
+    if (IS_LAST_TILE)
+    {
+      // Initialize the out-of-bounds flags
+      _CCCL_PRAGMA_UNROLL_FULL()
+      for (int ITEM = 0; ITEM < ITEMS_PER_THREAD; ++ITEM)
+      {
+        selection_flags[ITEM] = true;
+      }
+      // Guarded loads
+      BlockLoadFlags(temp_storage.load_flags)
+        .Load((d_flags_in + streaming_context.input_offset()) + tile_offset, flags, num_tile_items);
+    }
+    else
+    {
+      BlockLoadFlags(temp_storage.load_flags).Load((d_flags_in + streaming_context.input_offset()) + tile_offset, flags);
+    }
+
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (int ITEM = 0; ITEM < ITEMS_PER_THREAD; ++ITEM)
+    {
+      // Set selection_flags for out-of-bounds items
+      if ((!IS_LAST_TILE) || (static_cast<OffsetT>(threadIdx.x * ITEMS_PER_THREAD + ITEM) < num_tile_items))
+      {
+        selection_flags[ITEM] = static_cast<bool>(select_op(flags[ITEM]));
+      }
+    }
+  }
+
+  /**
+   * Initialize selections (specialized for valid flags)
+   */
+  template <bool IS_FIRST_TILE, bool IS_LAST_TILE>
+  _CCCL_DEVICE _CCCL_FORCEINLINE void InitializeSelections(
+    OffsetT tile_offset,
+    OffsetT num_tile_items,
+    InputT (& /*items*/)[ITEMS_PER_THREAD],
+    OffsetT (&selection_flags)[ITEMS_PER_THREAD],
+    constant_t<USE_SELECT_FLAGS> /*select_method*/)
+  {
+    __syncthreads();
+
+    FlagT flags[ITEMS_PER_THREAD];
+
+    if (IS_LAST_TILE)
+    {
+      // Out-of-bounds items are selection_flags
+      BlockLoadFlags(temp_storage.load_flags)
+        .Load((d_flags_in + streaming_context.input_offset()) + tile_offset, flags, num_tile_items, 1);
+    }
+    else
+    {
+      BlockLoadFlags(temp_storage.load_flags).Load((d_flags_in + streaming_context.input_offset()) + tile_offset, flags);
+    }
+
+    // Convert flag type to selection_flags type
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (int ITEM = 0; ITEM < ITEMS_PER_THREAD; ++ITEM)
+    {
+      selection_flags[ITEM] = static_cast<bool>(flags[ITEM]);
+    }
+  }
+
+  /**
+   * Initialize selections (specialized for discontinuity detection)
+   */
+  template <bool IS_FIRST_TILE, bool IS_LAST_TILE>
+  _CCCL_DEVICE _CCCL_FORCEINLINE void InitializeSelections(
+    OffsetT tile_offset,
+    OffsetT num_tile_items,
+    InputT (&items)[ITEMS_PER_THREAD],
+    OffsetT (&selection_flags)[ITEMS_PER_THREAD],
+    constant_t<USE_DISCONTINUITY> /*select_method*/)
+  {
+    if (IS_FIRST_TILE && streaming_context.is_first_partition())
+    {
+      __syncthreads();
+
+      // Set head selection_flags.  First tile sets the first flag for the first item
+      BlockDiscontinuityT(temp_storage.scan_storage.discontinuity).FlagHeads(selection_flags, items, inequality_op);
+    }
+    else
+    {
+      InputT tile_predecessor;
+      if (threadIdx.x == 0)
+      {
+        tile_predecessor = d_in[tile_offset + streaming_context.input_offset() - 1];
+      }
+
+      __syncthreads();
+
+      BlockDiscontinuityT(temp_storage.scan_storage.discontinuity)
+        .FlagHeads(selection_flags, items, inequality_op, tile_predecessor);
+    }
+
+    // Set selection flags for out-of-bounds items
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (int ITEM = 0; ITEM < ITEMS_PER_THREAD; ++ITEM)
+    {
+      // Set selection_flags for out-of-bounds items
+      if ((IS_LAST_TILE) && (OffsetT(threadIdx.x * ITEMS_PER_THREAD) + ITEM >= num_tile_items))
+      {
+        selection_flags[ITEM] = 1;
+      }
+    }
+  }
+
+  //---------------------------------------------------------------------
+  // Scatter utility methods
+  //---------------------------------------------------------------------
+
+  /**
+   * Scatter flagged items to output offsets (specialized for direct scattering).
+   */
+  template <bool IS_LAST_TILE>
+  _CCCL_DEVICE _CCCL_FORCEINLINE void ScatterSelectedDirect(
+    InputT (&items)[ITEMS_PER_THREAD],
+    OffsetT (&selection_flags)[ITEMS_PER_THREAD],
+    OffsetT (&selection_indices)[ITEMS_PER_THREAD],
+    OffsetT num_selections)
+  {
+    // Scatter flagged items
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (int ITEM = 0; ITEM < ITEMS_PER_THREAD; ++ITEM)
+    {
+      if (selection_flags[ITEM])
+      {
+        if ((!IS_LAST_TILE) || selection_indices[ITEM] < num_selections)
+        {
+          *((d_selected_out + streaming_context.num_previously_selected()) + selection_indices[ITEM]) = items[ITEM];
+        }
+      }
+    }
+  }
+
+  /**
+   * @brief Scatter flagged items to output offsets (specialized for two-phase scattering)
+   *
+   * @param num_tile_items
+   *   Number of valid items in this tile
+   *
+   * @param num_tile_selections
+   *   Number of selections in this tile
+   *
+   * @param num_selections_prefix
+   *   Total number of selections prior to this tile
+   *
+   * @param num_rejected_prefix
+   *   Total number of rejections prior to this tile
+   *
+   * @param is_keep_rejects
+   *   Marker type indicating whether to keep rejected items in the second partition
+   */
+  template <bool IS_LAST_TILE>
+  _CCCL_DEVICE _CCCL_FORCEINLINE void ScatterSelectedTwoPhase(
+    InputT (&items)[ITEMS_PER_THREAD],
+    OffsetT (&selection_flags)[ITEMS_PER_THREAD],
+    OffsetT (&selection_indices)[ITEMS_PER_THREAD],
+    int num_tile_selections,
+    OffsetT num_selections_prefix)
+  {
+    __syncthreads();
+
+    // Compact and scatter items
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (int ITEM = 0; ITEM < ITEMS_PER_THREAD; ++ITEM)
+    {
+      int local_scatter_offset = selection_indices[ITEM] - num_selections_prefix;
+      if (selection_flags[ITEM])
+      {
+        temp_storage.raw_exchange.Alias()[local_scatter_offset] = items[ITEM];
+      }
+    }
+
+    __syncthreads();
+
+    for (int item = threadIdx.x; item < num_tile_selections; item += BLOCK_THREADS)
+    {
+      *((d_selected_out + streaming_context.num_previously_selected()) + (num_selections_prefix + item)) =
+        temp_storage.raw_exchange.Alias()[item];
+    }
+  }
+
+  /**
+   * @brief Scatter flagged items. Specialized for selection algorithm that simply discards rejected items
+   *
+   * @param num_tile_items
+   *   Number of valid items in this tile
+   *
+   * @param num_tile_selections
+   *   Number of selections in this tile
+   *
+   * @param num_selections_prefix
+   *   Total number of selections prior to this tile
+   *
+   * @param num_rejected_prefix
+   *   Total number of rejections prior to this tile
+   *
+   * @param num_selections
+   *   Total number of selections including this tile
+   */
+  template <bool IS_LAST_TILE>
+  _CCCL_DEVICE _CCCL_FORCEINLINE void Scatter(
+    InputT (&items)[ITEMS_PER_THREAD],
+    OffsetT (&selection_flags)[ITEMS_PER_THREAD],
+    OffsetT (&selection_indices)[ITEMS_PER_THREAD],
+    int num_tile_items,
+    int num_tile_selections,
+    OffsetT num_selections_prefix,
+    OffsetT num_rejected_prefix,
+    OffsetT num_selections,
+    ::cuda::std::false_type /*is_keep_rejects*/)
+  {
+    // Do a two-phase scatter if two-phase is enabled and the average number of selection_flags items per thread is
+    // greater than one
+    if (TWO_PHASE_SCATTER && (num_tile_selections > BLOCK_THREADS))
+    {
+      ScatterSelectedTwoPhase<IS_LAST_TILE>(
+        items, selection_flags, selection_indices, num_tile_selections, num_selections_prefix);
+    }
+    else
+    {
+      ScatterSelectedDirect<IS_LAST_TILE>(items, selection_flags, selection_indices, num_selections);
+    }
+  }
+
+  /**
+   * @brief Scatter flagged items. Specialized for partitioning algorithm that writes rejected items to a second
+   * partition.
+   *
+   * @param num_tile_items
+   *   Number of valid items in this tile
+   *
+   * @param num_tile_selections
+   *   Number of selections in this tile
+   *
+   * @param num_selections_prefix
+   *   Total number of selections prior to this tile
+   *
+   * @param num_rejected_prefix
+   *   Total number of rejections prior to this tile
+   *
+   * @param is_keep_rejects
+   *   Marker type indicating whether to keep rejected items in the second partition
+   */
+  template <bool IS_LAST_TILE>
+  _CCCL_DEVICE _CCCL_FORCEINLINE void Scatter(
+    InputT (&items)[ITEMS_PER_THREAD],
+    OffsetT (&selection_flags)[ITEMS_PER_THREAD],
+    OffsetT (&selection_indices)[ITEMS_PER_THREAD],
+    int num_tile_items,
+    int num_tile_selections,
+    OffsetT num_selections_prefix,
+    OffsetT num_rejected_prefix,
+    OffsetT num_selections,
+    ::cuda::std::true_type /*is_keep_rejects*/)
+  {
+    __syncthreads();
+
+    int tile_num_rejections = num_tile_items - num_tile_selections;
+
+    // Scatter items to shared memory (rejections first)
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (int ITEM = 0; ITEM < ITEMS_PER_THREAD; ++ITEM)
+    {
+      int item_idx            = (threadIdx.x * ITEMS_PER_THREAD) + ITEM;
+      int local_selection_idx = selection_indices[ITEM] - num_selections_prefix;
+      int local_rejection_idx = item_idx - local_selection_idx;
+      int local_scatter_offset =
+        (selection_flags[ITEM]) ? tile_num_rejections + local_selection_idx : local_rejection_idx;
+
+      temp_storage.raw_exchange.Alias()[local_scatter_offset] = items[ITEM];
+    }
+
+    // Ensure all threads finished scattering to shared memory
+    __syncthreads();
+
+    // Gather items from shared memory and scatter to global
+    ScatterPartitionsToGlobal<IS_LAST_TILE>(
+      num_tile_items, tile_num_rejections, num_selections_prefix, num_rejected_prefix, d_selected_out);
+  }
+
+  /**
+   * @brief Second phase of scattering partitioned items to global memory. Specialized for partitioning to two
+   * distinct partitions.
+   */
+  template <bool IS_LAST_TILE, typename SelectedItT, typename RejectedItT>
+  _CCCL_DEVICE _CCCL_FORCEINLINE void ScatterPartitionsToGlobal(
+    int num_tile_items,
+    int tile_num_rejections,
+    OffsetT num_selections_prefix,
+    OffsetT num_rejected_prefix,
+    partition_distinct_output_t<SelectedItT, RejectedItT> partitioned_out_wrapper)
+  {
+    auto selected_out_it = partitioned_out_wrapper.selected_it + streaming_context.num_previously_selected();
+    auto rejected_out_it = partitioned_out_wrapper.rejected_it + streaming_context.num_previously_rejected();
+
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (int ITEM = 0; ITEM < ITEMS_PER_THREAD; ++ITEM)
+    {
+      int item_idx      = (ITEM * BLOCK_THREADS) + threadIdx.x;
+      int rejection_idx = item_idx;
+      int selection_idx = item_idx - tile_num_rejections;
+      OffsetT scatter_offset =
+        (item_idx < tile_num_rejections) ? num_rejected_prefix + rejection_idx : num_selections_prefix + selection_idx;
+
+      InputT item = temp_storage.raw_exchange.Alias()[item_idx];
+
+      if (!IS_LAST_TILE || (item_idx < num_tile_items))
+      {
+        if (item_idx >= tile_num_rejections)
+        {
+          selected_out_it[scatter_offset] = item;
+        }
+        else
+        {
+          rejected_out_it[scatter_offset] = item;
+        }
+      }
+    }
+  }
+
+  /**
+   * @brief Second phase of scattering partitioned items to global memory. Specialized for partitioning to a single
+   * iterator, where selected items are written in order from the beginning of the iterator and rejected items are
+   * writtem from the iterators end backwards.
+   */
+  template <bool IS_LAST_TILE, typename PartitionedOutputItT>
+  _CCCL_DEVICE _CCCL_FORCEINLINE void ScatterPartitionsToGlobal(
+    int num_tile_items,
+    int tile_num_rejections,
+    OffsetT num_selections_prefix,
+    OffsetT num_rejected_prefix,
+    PartitionedOutputItT partitioned_out_it)
+  {
+    using total_offset_t = typename StreamingContextT::total_num_items_t;
+
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (int ITEM = 0; ITEM < ITEMS_PER_THREAD; ++ITEM)
+    {
+      int item_idx      = (ITEM * BLOCK_THREADS) + threadIdx.x;
+      int rejection_idx = item_idx;
+      int selection_idx = item_idx - tile_num_rejections;
+      total_offset_t scatter_offset =
+        (item_idx < tile_num_rejections)
+          ? (streaming_context.num_total_items(num_items) - streaming_context.num_previously_rejected()
+             - static_cast<total_offset_t>(num_rejected_prefix) - static_cast<total_offset_t>(rejection_idx)
+             - total_offset_t{1})
+          : (streaming_context.num_previously_selected() + static_cast<total_offset_t>(num_selections_prefix)
+             + static_cast<total_offset_t>(selection_idx));
+
+      InputT item = temp_storage.raw_exchange.Alias()[item_idx];
+      if (!IS_LAST_TILE || (item_idx < num_tile_items))
+      {
+        partitioned_out_it[scatter_offset] = item;
+      }
+    }
+  }
+
+  //---------------------------------------------------------------------
+  // Cooperatively scan a device-wide sequence of tiles with other CTAs
+  //---------------------------------------------------------------------
+
+  /**
+   * @brief Process first tile of input (dynamic chained scan).
+   *
+   * @param num_tile_items
+   *   Number of input items comprising this tile
+   *
+   * @param tile_offset
+   *   Tile offset
+   *
+   * @param tile_state_wrapper
+   *   A global tile state descriptor wrapped in a MemoryOrderedTileStateT that ensures consistent memory order across
+   *   all tile status updates and loads
+   *
+   * @return The running count of selections (including this tile)
+   */
+  template <bool IS_LAST_TILE>
+  _CCCL_DEVICE _CCCL_FORCEINLINE OffsetT
+  ConsumeFirstTile(int num_tile_items, OffsetT tile_offset, MemoryOrderedTileStateT& tile_state_wrapper)
+  {
+    InputT items[ITEMS_PER_THREAD];
+    OffsetT selection_flags[ITEMS_PER_THREAD];
+    OffsetT selection_indices[ITEMS_PER_THREAD];
+
+    // Load items
+    if (IS_LAST_TILE)
+    {
+      BlockLoadT(temp_storage.load_items)
+        .Load((d_in + streaming_context.input_offset()) + tile_offset, items, num_tile_items);
+    }
+    else
+    {
+      BlockLoadT(temp_storage.load_items).Load((d_in + streaming_context.input_offset()) + tile_offset, items);
+    }
+
+    // Initialize selection_flags
+    InitializeSelections<true, IS_LAST_TILE>(
+      tile_offset, num_tile_items, items, selection_flags, constant_v<SELECT_METHOD>);
+
+    // Ensure temporary storage used during block load can be reused
+    // Also, in case of in-place stream compaction, this is needed to order the loads of
+    // *all threads of this thread block* before the st.release of the thread writing this thread block's tile state
+    __syncthreads();
+
+    // Exclusive scan of selection_flags
+    OffsetT num_tile_selections;
+    BlockScanT(temp_storage.scan_storage.scan).ExclusiveSum(selection_flags, selection_indices, num_tile_selections);
+
+    if (threadIdx.x == 0)
+    {
+      // Update tile status if this is not the last tile
+      if (!IS_LAST_TILE)
+      {
+        tile_state_wrapper.SetInclusive(0, num_tile_selections);
+      }
+    }
+
+    // Discount any out-of-bounds selections
+    if (IS_LAST_TILE)
+    {
+      num_tile_selections -= (TILE_ITEMS - num_tile_items);
+    }
+
+    // Scatter flagged items
+    Scatter<IS_LAST_TILE>(
+      items,
+      selection_flags,
+      selection_indices,
+      num_tile_items,
+      num_tile_selections,
+      0,
+      0,
+      num_tile_selections,
+      bool_constant_v < SelectionOpt == SelectImpl::Partition >);
+
+    return num_tile_selections;
+  }
+
+  /**
+   * @brief Process subsequent tile of input (dynamic chained scan).
+   *
+   * @param num_tile_items
+   *   Number of input items comprising this tile
+   *
+   * @param tile_idx
+   *   Tile index
+   *
+   * @param tile_offset
+   *   Tile offset
+   *
+   * @param tile_state_wrapper
+   *   A global tile state descriptor wrapped in a MemoryOrderedTileStateT that ensures consistent memory order across
+   *   all tile status updates and loads
+   *
+   * @return The running count of selections (including this tile)
+   */
+  template <bool IS_LAST_TILE>
+  _CCCL_DEVICE _CCCL_FORCEINLINE OffsetT ConsumeSubsequentTile(
+    int num_tile_items, int tile_idx, OffsetT tile_offset, MemoryOrderedTileStateT& tile_state_wrapper)
+  {
+    InputT items[ITEMS_PER_THREAD];
+    OffsetT selection_flags[ITEMS_PER_THREAD];
+    OffsetT selection_indices[ITEMS_PER_THREAD];
+
+    // Load items
+    if (IS_LAST_TILE)
+    {
+      BlockLoadT(temp_storage.load_items)
+        .Load((d_in + streaming_context.input_offset()) + tile_offset, items, num_tile_items);
+    }
+    else
+    {
+      BlockLoadT(temp_storage.load_items).Load((d_in + streaming_context.input_offset()) + tile_offset, items);
+    }
+
+    // Initialize selection_flags
+    InitializeSelections<false, IS_LAST_TILE>(
+      tile_offset, num_tile_items, items, selection_flags, constant_v<SELECT_METHOD>);
+
+    // Ensure temporary storage used during block load can be reused
+    // Also, in case of in-place stream compaction, this is needed to order the loads of
+    // *all threads of this thread block* before the st.release of the thread writing this thread block's tile state
+    __syncthreads();
+
+    // Exclusive scan of values and selection_flags
+    TilePrefixCallbackOpT prefix_op(
+      tile_state_wrapper, temp_storage.scan_storage.prefix, ::cuda::std::plus<>{}, tile_idx);
+    BlockScanT(temp_storage.scan_storage.scan).ExclusiveSum(selection_flags, selection_indices, prefix_op);
+
+    OffsetT num_tile_selections   = prefix_op.GetBlockAggregate();
+    OffsetT num_selections        = prefix_op.GetInclusivePrefix();
+    OffsetT num_selections_prefix = prefix_op.GetExclusivePrefix();
+    OffsetT num_rejected_prefix   = tile_offset - num_selections_prefix;
+
+    // Discount any out-of-bounds selections
+    if (IS_LAST_TILE)
+    {
+      int num_discount = TILE_ITEMS - num_tile_items;
+      num_selections -= num_discount;
+      num_tile_selections -= num_discount;
+    }
+
+    // note (only applies to in-place stream compaction): We can avoid having to introduce explicit memory order between
+    // the look-back (i.e., loading previous tiles' states) and scattering items (which means, potentially overwriting
+    // previous tiles' input items, in case of in-place compaction), because this is implicitly ensured through
+    // execution dependency: The scatter stage requires the offset from the prefix-sum and it can only know the
+    // prefix-sum after having read that from the decoupled look-back. Scatter flagged items
+    Scatter<IS_LAST_TILE>(
+      items,
+      selection_flags,
+      selection_indices,
+      num_tile_items,
+      num_tile_selections,
+      num_selections_prefix,
+      num_rejected_prefix,
+      num_selections,
+      bool_constant_v < SelectionOpt == SelectImpl::Partition >);
+
+    return num_selections;
+  }
+
+  /**
+   * @brief Process a tile of input
+   *
+   * @param num_tile_items
+   *   Number of input items comprising this tile
+   *
+   * @param tile_idx
+   *   Tile index
+   *
+   * @param tile_offset
+   *   Tile offset
+   *
+   * @param tile_state_wrapper
+   *   A global tile state descriptor wrapped in a MemoryOrderedTileStateT that ensures consistent memory order across
+   *   all tile status updates and loads
+   */
+  template <bool IS_LAST_TILE>
+  _CCCL_DEVICE _CCCL_FORCEINLINE OffsetT
+  ConsumeTile(int num_tile_items, int tile_idx, OffsetT tile_offset, MemoryOrderedTileStateT& tile_state_wrapper)
+  {
+    OffsetT num_selections;
+    if (tile_idx == 0)
+    {
+      num_selections = ConsumeFirstTile<IS_LAST_TILE>(num_tile_items, tile_offset, tile_state_wrapper);
+    }
+    else
+    {
+      num_selections = ConsumeSubsequentTile<IS_LAST_TILE>(num_tile_items, tile_idx, tile_offset, tile_state_wrapper);
+    }
+
+    return num_selections;
+  }
+
+  /**
+   * @brief Scan tiles of items as part of a dynamic chained scan
+   *
+   * @param num_tiles
+   *   Total number of input tiles
+   *
+   * @param tile_state
+   *   Global tile state descriptor
+   *
+   * @param d_num_selected_out
+   *   Output total number selection_flags
+   *
+   * @tparam NumSelectedIteratorT
+   *   Output iterator type for recording number of items selection_flags
+   */
+  template <typename NumSelectedIteratorT>
+  _CCCL_DEVICE _CCCL_FORCEINLINE void
+  ConsumeRange(int num_tiles, ScanTileStateT& tile_state, NumSelectedIteratorT d_num_selected_out)
+  {
+    // Ensure consistent memory order across all tile status updates and loads
+    auto tile_state_wrapper = MemoryOrderedTileStateT{tile_state};
+
+    // Blocks are launched in increasing order, so just assign one tile per block
+    // TODO (elstehle): replacing this term with just `blockIdx.x` degrades perf for partition. Once we get to re-tune
+    // the algorithm, we want to replace this term with `blockIdx.x`
+    int tile_idx        = (blockIdx.x * gridDim.y) + blockIdx.y; // Current tile index
+    OffsetT tile_offset = static_cast<OffsetT>(tile_idx) * static_cast<OffsetT>(TILE_ITEMS);
+
+    if (tile_idx < num_tiles - 1)
+    {
+      // Not the last tile (full)
+      ConsumeTile<false>(TILE_ITEMS, tile_idx, tile_offset, tile_state_wrapper);
+    }
+    else
+    {
+      // The last tile (possibly partially-full)
+      OffsetT num_remaining  = num_items - tile_offset;
+      OffsetT num_selections = ConsumeTile<true>(num_remaining, tile_idx, tile_offset, tile_state_wrapper);
+
+      if (threadIdx.x == 0)
+      {
+        // Update the number of selected items with this partition's selections
+        streaming_context.update_num_selected(d_num_selected_out, num_selections);
+      }
+    }
+  }
+};
+
+} // namespace select
+} // namespace detail
+
+CUB_NAMESPACE_END