cribl-control-plane 0.2.0a1__py3-none-any.whl → 0.2.0b2__py3-none-any.whl

cribl_control_plane/models/outputgrafanacloud.py

@@ -18,7 +18,9 @@ class OutputGrafanaCloudType2(str, Enum):
 class OutputGrafanaCloudMessageFormat2(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Format to use when sending logs to Loki (Protobuf or JSON)"""
 
+    # Protobuf
     PROTOBUF = "protobuf"
+    # JSON
     JSON = "json"
 
 
@@ -36,10 +38,15 @@ class OutputGrafanaCloudLabel2(BaseModel):
 class OutputGrafanaCloudPrometheusAuthAuthenticationType2(
     str, Enum, metaclass=utils.OpenEnumMeta
 ):
+    # None
     NONE = "none"
+    # Auth token
     TOKEN = "token"
+    # Auth token (text secret)
     TEXT_SECRET = "textSecret"
+    # Basic
     BASIC = "basic"
+    # Basic (credentials secret)
     CREDENTIALS_SECRET = "credentialsSecret"
 
 
@@ -87,10 +94,15 @@ class OutputGrafanaCloudPrometheusAuth2(BaseModel):
 class OutputGrafanaCloudLokiAuthAuthenticationType2(
     str, Enum, metaclass=utils.OpenEnumMeta
 ):
+    # None
     NONE = "none"
+    # Auth token
     TOKEN = "token"
+    # Auth token (text secret)
     TEXT_SECRET = "textSecret"
+    # Basic
     BASIC = "basic"
+    # Basic (credentials secret)
     CREDENTIALS_SECRET = "credentialsSecret"
 
 
@@ -151,8 +163,11 @@ class OutputGrafanaCloudFailedRequestLoggingMode2(
 ):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
@@ -213,30 +228,40 @@ class OutputGrafanaCloudTimeoutRetrySettings2(BaseModel):
 class OutputGrafanaCloudBackpressureBehavior2(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputGrafanaCloudCompression2(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputGrafanaCloudQueueFullBehavior2(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputGrafanaCloudMode2(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 
@@ -518,7 +543,9 @@ class OutputGrafanaCloudType1(str, Enum):
 class OutputGrafanaCloudMessageFormat1(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Format to use when sending logs to Loki (Protobuf or JSON)"""
 
+    # Protobuf
     PROTOBUF = "protobuf"
+    # JSON
     JSON = "json"
 
 
@@ -536,10 +563,15 @@ class OutputGrafanaCloudLabel1(BaseModel):
 class OutputGrafanaCloudPrometheusAuthAuthenticationType1(
     str, Enum, metaclass=utils.OpenEnumMeta
 ):
+    # None
     NONE = "none"
+    # Auth token
     TOKEN = "token"
+    # Auth token (text secret)
     TEXT_SECRET = "textSecret"
+    # Basic
     BASIC = "basic"
+    # Basic (credentials secret)
     CREDENTIALS_SECRET = "credentialsSecret"
 
 
@@ -587,10 +619,15 @@ class OutputGrafanaCloudPrometheusAuth1(BaseModel):
 class OutputGrafanaCloudLokiAuthAuthenticationType1(
     str, Enum, metaclass=utils.OpenEnumMeta
 ):
+    # None
     NONE = "none"
+    # Auth token
     TOKEN = "token"
+    # Auth token (text secret)
     TEXT_SECRET = "textSecret"
+    # Basic
     BASIC = "basic"
+    # Basic (credentials secret)
     CREDENTIALS_SECRET = "credentialsSecret"
 
 
@@ -651,8 +688,11 @@ class OutputGrafanaCloudFailedRequestLoggingMode1(
 ):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
@@ -713,30 +753,40 @@ class OutputGrafanaCloudTimeoutRetrySettings1(BaseModel):
 class OutputGrafanaCloudBackpressureBehavior1(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputGrafanaCloudCompression1(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputGrafanaCloudQueueFullBehavior1(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputGrafanaCloudMode1(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputgraphite.py

@@ -18,37 +18,49 @@ class OutputGraphiteType(str, Enum):
 class OutputGraphiteDestinationProtocol(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Protocol to use when communicating with the destination."""
 
+    # UDP
     UDP = "udp"
+    # TCP
     TCP = "tcp"
 
 
 class OutputGraphiteBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputGraphiteCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputGraphiteQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputGraphiteMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputhoneycomb.py

@@ -29,8 +29,11 @@ class OutputHoneycombExtraHTTPHeader(BaseModel):
 class OutputHoneycombFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
@@ -91,8 +94,11 @@ class OutputHoneycombTimeoutRetrySettings(BaseModel):
 class OutputHoneycombBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -106,22 +112,29 @@ class OutputHoneycombAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMet
 class OutputHoneycombCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputHoneycombQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputHoneycombMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputhumiohec.py

@@ -29,15 +29,20 @@ class OutputHumioHecExtraHTTPHeader(BaseModel):
 class OutputHumioHecFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
 class OutputHumioHecRequestFormat(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""When set to JSON, the event is automatically formatted with required fields before sending. When set to Raw, only the event's `_raw` value is sent."""
 
+    # JSON
     JSON = "JSON"
+    # Raw
     RAW = "raw"
 
 
@@ -105,30 +110,40 @@ class OutputHumioHecTimeoutRetrySettings(BaseModel):
 class OutputHumioHecBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputHumioHecCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputHumioHecQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputHumioHecMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputinfluxdb.py

@@ -18,11 +18,17 @@ class OutputInfluxdbType(str, Enum):
 class TimestampPrecision(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Sets the precision for the supplied Unix time values. Defaults to milliseconds."""
 
+    # Nanoseconds
     NS = "ns"
+    # Microseconds
     U = "u"
+    # Milliseconds
     MS = "ms"
+    # Seconds
     S = "s"
+    # Minutes
     M = "m"
+    # Hours
     H = "h"
 
 
@@ -40,8 +46,11 @@ class OutputInfluxdbExtraHTTPHeader(BaseModel):
 class OutputInfluxdbFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
@@ -102,8 +111,11 @@ class OutputInfluxdbTimeoutRetrySettings(BaseModel):
 class OutputInfluxdbBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -121,22 +133,29 @@ class OutputInfluxdbAuthenticationType(str, Enum, metaclass=utils.OpenEnumMeta):
 class OutputInfluxdbCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputInfluxdbQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputInfluxdbMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputkafka.py

@@ -18,35 +18,38 @@ class OutputKafkaType(str, Enum):
 class OutputKafkaAcknowledgments(int, Enum, metaclass=utils.OpenEnumMeta):
     r"""Control the number of required acknowledgments."""
 
+    # Leader
     ONE = 1
+    # None
     ZERO = 0
+    # All
     MINUS_1 = -1
 
 
 class OutputKafkaRecordDataFormat(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Format to use to serialize events before writing to Kafka."""
 
+    # JSON
     JSON = "json"
+    # Field _raw
     RAW = "raw"
+    # Protobuf
     PROTOBUF = "protobuf"
 
 
 class OutputKafkaCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the data before sending to Kafka"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
+    # Snappy
     SNAPPY = "snappy"
+    # LZ4
     LZ4 = "lz4"
 
 
-class OutputKafkaSchemaType(str, Enum, metaclass=utils.OpenEnumMeta):
-    r"""The schema format used to encode and decode event data"""
-
-    AVRO = "avro"
-    JSON = "json"
-
-
 class OutputKafkaAuthTypedDict(TypedDict):
     r"""Credentials to use when authenticating with the schema registry using basic HTTP authentication"""
 
@@ -157,8 +160,6 @@ class OutputKafkaKafkaSchemaRegistryAuthenticationTypedDict(TypedDict):
     disabled: NotRequired[bool]
     schema_registry_url: NotRequired[str]
     r"""URL for accessing the Confluent Schema Registry. Example: http://localhost:8081. To connect over TLS, use https instead of http."""
-    schema_type: NotRequired[OutputKafkaSchemaType]
-    r"""The schema format used to encode and decode event data"""
     connection_timeout: NotRequired[float]
     r"""Maximum time to wait for a Schema Registry connection to complete successfully"""
     request_timeout: NotRequired[float]
@@ -182,14 +183,6 @@ class OutputKafkaKafkaSchemaRegistryAuthentication(BaseModel):
     ] = "http://localhost:8081"
     r"""URL for accessing the Confluent Schema Registry. Example: http://localhost:8081. To connect over TLS, use https instead of http."""
 
-    schema_type: Annotated[
-        Annotated[
-            Optional[OutputKafkaSchemaType], PlainValidator(validate_open_enum(False))
-        ],
-        pydantic.Field(alias="schemaType"),
-    ] = OutputKafkaSchemaType.AVRO
-    r"""The schema format used to encode and decode event data"""
-
     connection_timeout: Annotated[
         Optional[float], pydantic.Field(alias="connectionTimeout")
     ] = 30000
@@ -220,9 +213,13 @@ class OutputKafkaKafkaSchemaRegistryAuthentication(BaseModel):
 
 
 class OutputKafkaSASLMechanism(str, Enum, metaclass=utils.OpenEnumMeta):
+    # PLAIN
     PLAIN = "plain"
+    # SCRAM-SHA-256
     SCRAM_SHA_256 = "scram-sha-256"
+    # SCRAM-SHA-512
     SCRAM_SHA_512 = "scram-sha-512"
+    # GSSAPI/Kerberos
     KERBEROS = "kerberos"
 
 
@@ -336,30 +333,40 @@ class OutputKafkaTLSSettingsClientSide(BaseModel):
 class OutputKafkaBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputKafkaPqCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputKafkaQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputKafkaMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputkinesis.py

@@ -18,8 +18,11 @@ class OutputKinesisType(str, Enum):
 class OutputKinesisAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""AWS authentication method. Choose Auto to use IAM roles."""
 
+    # Auto
     AUTO = "auto"
+    # Manual
     MANUAL = "manual"
+    # Secret Key pair
     SECRET = "secret"
 
 
@@ -33,37 +36,49 @@ class OutputKinesisSignatureVersion(str, Enum, metaclass=utils.OpenEnumMeta):
 class OutputKinesisCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Compression type to use for records"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputKinesisBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputKinesisPqCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputKinesisQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputKinesisMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputloki.py

@@ -18,7 +18,9 @@ class OutputLokiType(str, Enum):
 class OutputLokiMessageFormat(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Format to use when sending logs to Loki (Protobuf or JSON)"""
 
+    # Protobuf
     PROTOBUF = "protobuf"
+    # JSON
     JSON = "json"
 
 
@@ -34,10 +36,15 @@ class OutputLokiLabel(BaseModel):
 
 
 class OutputLokiAuthenticationType(str, Enum, metaclass=utils.OpenEnumMeta):
+    # None
     NONE = "none"
+    # Auth token
     TOKEN = "token"
+    # Auth token (text secret)
     TEXT_SECRET = "textSecret"
+    # Basic
     BASIC = "basic"
+    # Basic (credentials secret)
     CREDENTIALS_SECRET = "credentialsSecret"
 
 
@@ -55,8 +62,11 @@ class OutputLokiExtraHTTPHeader(BaseModel):
 class OutputLokiFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
@@ -117,30 +127,40 @@ class OutputLokiTimeoutRetrySettings(BaseModel):
 class OutputLokiBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputLokiCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputLokiQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputLokiMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"