cribl-control-plane 0.2.0a1__py3-none-any.whl → 0.2.0b1__py3-none-any.whl

cribl_control_plane/models/outputminio.py

@@ -18,8 +18,11 @@ class OutputMinioType(str, Enum):
 class OutputMinioAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""AWS authentication method. Choose Auto to use IAM roles."""
 
+    # Auto
     AUTO = "auto"
+    # Manual
     MANUAL = "manual"
+    # Secret Key pair
     SECRET = "secret"
 
 
@@ -33,47 +36,64 @@ class OutputMinioSignatureVersion(str, Enum, metaclass=utils.OpenEnumMeta):
 class OutputMinioObjectACL(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Object ACL to assign to uploaded objects"""
 
+    # Private
     PRIVATE = "private"
+    # Public Read Only
     PUBLIC_READ = "public-read"
+    # Public Read/Write
     PUBLIC_READ_WRITE = "public-read-write"
+    # Authenticated Read Only
     AUTHENTICATED_READ = "authenticated-read"
+    # AWS EC2 AMI Read Only
     AWS_EXEC_READ = "aws-exec-read"
+    # Bucket Owner Read Only
     BUCKET_OWNER_READ = "bucket-owner-read"
+    # Bucket Owner Full Control
     BUCKET_OWNER_FULL_CONTROL = "bucket-owner-full-control"
 
 
 class OutputMinioStorageClass(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Storage class to select for uploaded objects"""
 
+    # Standard
     STANDARD = "STANDARD"
+    # Reduced Redundancy Storage
     REDUCED_REDUNDANCY = "REDUCED_REDUNDANCY"
 
 
 class ServerSideEncryption(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Server-side encryption for uploaded objects"""
 
+    # Amazon S3 Managed Key
     AES256 = "AES256"
 
 
 class OutputMinioDataFormat(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Format of the output data"""
 
+    # JSON
     JSON = "json"
+    # Raw
     RAW = "raw"
+    # Parquet
     PARQUET = "parquet"
 
 
 class OutputMinioBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
 
 
 class OutputMinioDiskSpaceProtection(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when disk space is below the global 'Min free disk space' limit"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
 
 
@@ -87,23 +107,31 @@ class OutputMinioCompression(str, Enum, metaclass=utils.OpenEnumMeta):
 class OutputMinioCompressionLevel(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Compression level to apply before moving files to final destination"""
 
+    # Best Speed
     BEST_SPEED = "best_speed"
+    # Normal
     NORMAL = "normal"
+    # Best Compression
     BEST_COMPRESSION = "best_compression"
 
 
 class OutputMinioParquetVersion(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Determines which data types are supported and how they are represented"""
 
+    # 1.0
     PARQUET_1_0 = "PARQUET_1_0"
+    # 2.4
     PARQUET_2_4 = "PARQUET_2_4"
+    # 2.6
     PARQUET_2_6 = "PARQUET_2_6"
 
 
 class OutputMinioDataPageVersion(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Serialization format of data pages. Note that some reader implementations use Data page V2's attributes to work more efficiently, while others ignore it."""
 
+    # V1
     DATA_PAGE_V1 = "DATA_PAGE_V1"
+    # V2
     DATA_PAGE_V2 = "DATA_PAGE_V2"
 
 

cribl_control_plane/models/outputmsk.py

@@ -18,35 +18,38 @@ class OutputMskType(str, Enum):
 class OutputMskAcknowledgments(int, Enum, metaclass=utils.OpenEnumMeta):
     r"""Control the number of required acknowledgments."""
 
+    # Leader
     ONE = 1
+    # None
     ZERO = 0
+    # All
     MINUS_1 = -1
 
 
 class OutputMskRecordDataFormat(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Format to use to serialize events before writing to Kafka."""
 
+    # JSON
     JSON = "json"
+    # Field _raw
     RAW = "raw"
+    # Protobuf
     PROTOBUF = "protobuf"
 
 
 class OutputMskCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the data before sending to Kafka"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
+    # Snappy
     SNAPPY = "snappy"
+    # LZ4
     LZ4 = "lz4"
 
 
-class OutputMskSchemaType(str, Enum, metaclass=utils.OpenEnumMeta):
-    r"""The schema format used to encode and decode event data"""
-
-    AVRO = "avro"
-    JSON = "json"
-
-
 class OutputMskAuthTypedDict(TypedDict):
     r"""Credentials to use when authenticating with the schema registry using basic HTTP authentication"""
 
@@ -157,8 +160,6 @@ class OutputMskKafkaSchemaRegistryAuthenticationTypedDict(TypedDict):
     disabled: NotRequired[bool]
     schema_registry_url: NotRequired[str]
     r"""URL for accessing the Confluent Schema Registry. Example: http://localhost:8081. To connect over TLS, use https instead of http."""
-    schema_type: NotRequired[OutputMskSchemaType]
-    r"""The schema format used to encode and decode event data"""
     connection_timeout: NotRequired[float]
     r"""Maximum time to wait for a Schema Registry connection to complete successfully"""
     request_timeout: NotRequired[float]
@@ -182,14 +183,6 @@ class OutputMskKafkaSchemaRegistryAuthentication(BaseModel):
     ] = "http://localhost:8081"
     r"""URL for accessing the Confluent Schema Registry. Example: http://localhost:8081. To connect over TLS, use https instead of http."""
 
-    schema_type: Annotated[
-        Annotated[
-            Optional[OutputMskSchemaType], PlainValidator(validate_open_enum(False))
-        ],
-        pydantic.Field(alias="schemaType"),
-    ] = OutputMskSchemaType.AVRO
-    r"""The schema format used to encode and decode event data"""
-
     connection_timeout: Annotated[
         Optional[float], pydantic.Field(alias="connectionTimeout")
     ] = 30000
@@ -222,8 +215,11 @@ class OutputMskKafkaSchemaRegistryAuthentication(BaseModel):
 class OutputMskAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""AWS authentication method. Choose Auto to use IAM roles."""
 
+    # Auto
     AUTO = "auto"
+    # Manual
     MANUAL = "manual"
+    # Secret Key pair
     SECRET = "secret"
 
 
@@ -320,30 +316,40 @@ class OutputMskTLSSettingsClientSide(BaseModel):
 class OutputMskBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputMskPqCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputMskQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputMskMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputnewrelic.py

@@ -18,8 +18,11 @@ class OutputNewrelicType(str, Enum):
 class OutputNewrelicRegion(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Which New Relic region endpoint to use."""
 
+    # US
     US = "US"
+    # Europe
     EU = "EU"
+    # Custom
     CUSTOM = "Custom"
 
 
@@ -57,8 +60,11 @@ class OutputNewrelicExtraHTTPHeader(BaseModel):
 class OutputNewrelicFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
@@ -119,8 +125,11 @@ class OutputNewrelicTimeoutRetrySettings(BaseModel):
 class OutputNewrelicBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -134,22 +143,29 @@ class OutputNewrelicAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta
 class OutputNewrelicCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputNewrelicQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputNewrelicMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputnewrelicevents.py

@@ -18,8 +18,11 @@ class OutputNewrelicEventsType(str, Enum):
 class OutputNewrelicEventsRegion(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Which New Relic region endpoint to use."""
 
+    # US
     US = "US"
+    # Europe
     EU = "EU"
+    # Custom
     CUSTOM = "Custom"
 
 
@@ -39,8 +42,11 @@ class OutputNewrelicEventsFailedRequestLoggingMode(
 ):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
@@ -101,8 +107,11 @@ class OutputNewrelicEventsTimeoutRetrySettings(BaseModel):
 class OutputNewrelicEventsBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -116,22 +125,29 @@ class OutputNewrelicEventsAuthenticationMethod(str, Enum, metaclass=utils.OpenEn
 class OutputNewrelicEventsCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputNewrelicEventsQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputNewrelicEventsMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputopentelemetry.py

@@ -18,22 +18,29 @@ class OutputOpenTelemetryType(str, Enum):
 class OutputOpenTelemetryProtocol(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Select a transport option for OpenTelemetry"""
 
+    # gRPC
     GRPC = "grpc"
+    # HTTP
     HTTP = "http"
 
 
 class OutputOpenTelemetryOTLPVersion(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""The version of OTLP Protobuf definitions to use when structuring data to send"""
 
+    # 0.10.0
     ZERO_DOT_10_DOT_0 = "0.10.0"
+    # 1.3.1
     ONE_DOT_3_DOT_1 = "1.3.1"
 
 
 class OutputOpenTelemetryCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Type of compression to apply to messages sent to the OpenTelemetry endpoint"""
 
+    # None
     NONE = "none"
+    # Deflate
     DEFLATE = "deflate"
+    # Gzip
     GZIP = "gzip"
 
 
@@ -42,7 +49,9 @@ class OutputOpenTelemetryHTTPCompressCompression(
 ):
     r"""Type of compression to apply to messages sent to the OpenTelemetry endpoint"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
@@ -73,16 +82,22 @@ class OutputOpenTelemetryFailedRequestLoggingMode(
 ):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
 class OutputOpenTelemetryBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -262,22 +277,29 @@ class OutputOpenTelemetryTLSSettingsClientSide(BaseModel):
 class OutputOpenTelemetryPqCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputOpenTelemetryQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputOpenTelemetryMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputprometheus.py

@@ -29,8 +29,11 @@ class OutputPrometheusExtraHTTPHeader(BaseModel):
 class OutputPrometheusFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
@@ -91,8 +94,11 @@ class OutputPrometheusTimeoutRetrySettings(BaseModel):
 class OutputPrometheusBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -110,22 +116,29 @@ class OutputPrometheusAuthenticationType(str, Enum, metaclass=utils.OpenEnumMeta
 class OutputPrometheusCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputPrometheusQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputPrometheusMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputring.py

@@ -30,7 +30,9 @@ class OutputRingDataCompressionFormat(str, Enum, metaclass=utils.OpenEnumMeta):
 class OutputRingBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
 
 

cribl_control_plane/models/outputs3.py

@@ -18,8 +18,11 @@ class OutputS3Type(str, Enum):
 class OutputS3AuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""AWS authentication method. Choose Auto to use IAM roles."""
 
+    # Auto
     AUTO = "auto"
+    # Manual
     MANUAL = "manual"
+    # Secret Key pair
     SECRET = "secret"
 
 
@@ -33,54 +36,78 @@ class OutputS3SignatureVersion(str, Enum, metaclass=utils.OpenEnumMeta):
 class OutputS3ObjectACL(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Object ACL to assign to uploaded objects"""
 
+    # Private
     PRIVATE = "private"
+    # Public Read Only
     PUBLIC_READ = "public-read"
+    # Public Read/Write
     PUBLIC_READ_WRITE = "public-read-write"
+    # Authenticated Read Only
     AUTHENTICATED_READ = "authenticated-read"
+    # AWS EC2 AMI Read Only
     AWS_EXEC_READ = "aws-exec-read"
+    # Bucket Owner Read Only
     BUCKET_OWNER_READ = "bucket-owner-read"
+    # Bucket Owner Full Control
     BUCKET_OWNER_FULL_CONTROL = "bucket-owner-full-control"
 
 
 class OutputS3StorageClass(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Storage class to select for uploaded objects"""
 
+    # Standard
     STANDARD = "STANDARD"
+    # Reduced Redundancy Storage
     REDUCED_REDUNDANCY = "REDUCED_REDUNDANCY"
+    # Standard, Infrequent Access
     STANDARD_IA = "STANDARD_IA"
+    # One Zone, Infrequent Access
     ONEZONE_IA = "ONEZONE_IA"
+    # Intelligent Tiering
     INTELLIGENT_TIERING = "INTELLIGENT_TIERING"
+    # Glacier Flexible Retrieval
     GLACIER = "GLACIER"
+    # Glacier Instant Retrieval
     GLACIER_IR = "GLACIER_IR"
+    # Glacier Deep Archive
     DEEP_ARCHIVE = "DEEP_ARCHIVE"
 
 
 class OutputS3ServerSideEncryptionForUploadedObjects(
     str, Enum, metaclass=utils.OpenEnumMeta
 ):
+    # Amazon S3 Managed Key
     AES256 = "AES256"
+    # AWS KMS Managed Key
     AWS_KMS = "aws:kms"
 
 
 class OutputS3DataFormat(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Format of the output data"""
 
+    # JSON
     JSON = "json"
+    # Raw
     RAW = "raw"
+    # Parquet
     PARQUET = "parquet"
 
 
 class OutputS3BackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
 
 
 class OutputS3DiskSpaceProtection(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when disk space is below the global 'Min free disk space' limit"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
 
 
@@ -94,23 +121,31 @@ class OutputS3Compression(str, Enum, metaclass=utils.OpenEnumMeta):
 class OutputS3CompressionLevel(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Compression level to apply before moving files to final destination"""
 
+    # Best Speed
     BEST_SPEED = "best_speed"
+    # Normal
     NORMAL = "normal"
+    # Best Compression
     BEST_COMPRESSION = "best_compression"
 
 
 class OutputS3ParquetVersion(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Determines which data types are supported and how they are represented"""
 
+    # 1.0
     PARQUET_1_0 = "PARQUET_1_0"
+    # 2.4
     PARQUET_2_4 = "PARQUET_2_4"
+    # 2.6
     PARQUET_2_6 = "PARQUET_2_6"
 
 
 class OutputS3DataPageVersion(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Serialization format of data pages. Note that some reader implementations use Data page V2's attributes to work more efficiently, while others ignore it."""
 
+    # V1
     DATA_PAGE_V1 = "DATA_PAGE_V1"
+    # V2
     DATA_PAGE_V2 = "DATA_PAGE_V2"