cribl-control-plane 0.1.1rc7__py3-none-any.whl → 0.2.0__py3-none-any.whl

cribl_control_plane/models/outputchronicle.py

@@ -88,22 +88,16 @@ class OutputChronicleExtraHTTPHeader(BaseModel):
 class OutputChronicleFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
-    # Payload
     PAYLOAD = "payload"
-    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
-    # None
     NONE = "none"
 
 
 class OutputChronicleBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
-    # Block
     BLOCK = "block"
-    # Drop
     DROP = "drop"
-    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -121,29 +115,22 @@ class OutputChronicleCustomLabel(BaseModel):
 class OutputChronicleCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
-    # None
     NONE = "none"
-    # Gzip
     GZIP = "gzip"
 
 
 class OutputChronicleQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
-    # Block
     BLOCK = "block"
-    # Drop new data
     DROP = "drop"
 
 
 class OutputChronicleMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
-    # Error
     ERROR = "error"
-    # Backpressure
     BACKPRESSURE = "backpressure"
-    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputclickhouse.py

@@ -28,18 +28,14 @@ class OutputClickHouseAuthenticationType(str, Enum, metaclass=utils.OpenEnumMeta
 class OutputClickHouseFormat(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data format to use when sending data to ClickHouse. Defaults to JSON Compact."""
 
-    # JSONCompactEachRowWithNames
     JSON_COMPACT_EACH_ROW_WITH_NAMES = "json-compact-each-row-with-names"
-    # JSONEachRow
     JSON_EACH_ROW = "json-each-row"
 
 
 class MappingType(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How event fields are mapped to ClickHouse columns."""
 
-    # Automatic
     AUTOMATIC = "automatic"
-    # Custom
     CUSTOM = "custom"
 
 
@@ -129,11 +125,8 @@ class OutputClickHouseExtraHTTPHeader(BaseModel):
 class OutputClickHouseFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
-    # Payload
     PAYLOAD = "payload"
-    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
-    # None
     NONE = "none"
 
 
@@ -194,11 +187,8 @@ class OutputClickHouseTimeoutRetrySettings(BaseModel):
 class OutputClickHouseBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
-    # Block
     BLOCK = "block"
-    # Drop
     DROP = "drop"
-    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -257,29 +247,22 @@ class ColumnMapping(BaseModel):
 class OutputClickHouseCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
-    # None
     NONE = "none"
-    # Gzip
     GZIP = "gzip"
 
 
 class OutputClickHouseQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
-    # Block
     BLOCK = "block"
-    # Drop new data
     DROP = "drop"
 
 
 class OutputClickHouseMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
-    # Error
     ERROR = "error"
-    # Backpressure
     BACKPRESSURE = "backpressure"
-    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputcloudwatch.py

@@ -18,51 +18,38 @@ class OutputCloudwatchType(str, Enum):
 class OutputCloudwatchAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""AWS authentication method. Choose Auto to use IAM roles."""
 
-    # Auto
     AUTO = "auto"
-    # Manual
     MANUAL = "manual"
-    # Secret Key pair
     SECRET = "secret"
 
 
 class OutputCloudwatchBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
-    # Block
     BLOCK = "block"
-    # Drop
     DROP = "drop"
-    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputCloudwatchCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
-    # None
     NONE = "none"
-    # Gzip
     GZIP = "gzip"
 
 
 class OutputCloudwatchQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
-    # Block
     BLOCK = "block"
-    # Drop new data
     DROP = "drop"
 
 
 class OutputCloudwatchMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
-    # Error
     ERROR = "error"
-    # Backpressure
     BACKPRESSURE = "backpressure"
-    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputconfluentcloud.py

@@ -101,38 +101,35 @@ class OutputConfluentCloudTLSSettingsClientSide(BaseModel):
 class OutputConfluentCloudAcknowledgments(int, Enum, metaclass=utils.OpenEnumMeta):
     r"""Control the number of required acknowledgments."""
 
-    # Leader
     ONE = 1
-    # None
     ZERO = 0
-    # All
     MINUS_1 = -1
 
 
 class OutputConfluentCloudRecordDataFormat(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Format to use to serialize events before writing to Kafka."""
 
-    # JSON
     JSON = "json"
-    # Field _raw
     RAW = "raw"
-    # Protobuf
     PROTOBUF = "protobuf"
 
 
 class OutputConfluentCloudCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the data before sending to Kafka"""
 
-    # None
     NONE = "none"
-    # Gzip
     GZIP = "gzip"
-    # Snappy
     SNAPPY = "snappy"
-    # LZ4
     LZ4 = "lz4"
 
 
+class OutputConfluentCloudSchemaType(str, Enum, metaclass=utils.OpenEnumMeta):
+    r"""The schema format used to encode and decode event data"""
+
+    AVRO = "avro"
+    JSON = "json"
+
+
 class OutputConfluentCloudAuthTypedDict(TypedDict):
     r"""Credentials to use when authenticating with the schema registry using basic HTTP authentication"""
 
@@ -243,6 +240,8 @@ class OutputConfluentCloudKafkaSchemaRegistryAuthenticationTypedDict(TypedDict):
     disabled: NotRequired[bool]
     schema_registry_url: NotRequired[str]
     r"""URL for accessing the Confluent Schema Registry. Example: http://localhost:8081. To connect over TLS, use https instead of http."""
+    schema_type: NotRequired[OutputConfluentCloudSchemaType]
+    r"""The schema format used to encode and decode event data"""
     connection_timeout: NotRequired[float]
     r"""Maximum time to wait for a Schema Registry connection to complete successfully"""
     request_timeout: NotRequired[float]
@@ -268,6 +267,15 @@ class OutputConfluentCloudKafkaSchemaRegistryAuthentication(BaseModel):
     ] = "http://localhost:8081"
     r"""URL for accessing the Confluent Schema Registry. Example: http://localhost:8081. To connect over TLS, use https instead of http."""
 
+    schema_type: Annotated[
+        Annotated[
+            Optional[OutputConfluentCloudSchemaType],
+            PlainValidator(validate_open_enum(False)),
+        ],
+        pydantic.Field(alias="schemaType"),
+    ] = OutputConfluentCloudSchemaType.AVRO
+    r"""The schema format used to encode and decode event data"""
+
     connection_timeout: Annotated[
         Optional[float], pydantic.Field(alias="connectionTimeout")
     ] = 30000
@@ -298,13 +306,9 @@ class OutputConfluentCloudKafkaSchemaRegistryAuthentication(BaseModel):
 
 
 class OutputConfluentCloudSASLMechanism(str, Enum, metaclass=utils.OpenEnumMeta):
-    # PLAIN
     PLAIN = "plain"
-    # SCRAM-SHA-256
     SCRAM_SHA_256 = "scram-sha-256"
-    # SCRAM-SHA-512
     SCRAM_SHA_512 = "scram-sha-512"
-    # GSSAPI/Kerberos
     KERBEROS = "kerberos"
 
 
@@ -336,11 +340,8 @@ class OutputConfluentCloudAuthentication(BaseModel):
 class OutputConfluentCloudBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
-    # Block
     BLOCK = "block"
-    # Drop
     DROP = "drop"
-    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -349,29 +350,22 @@ class OutputConfluentCloudPqCompressCompression(
 ):
     r"""Codec to use to compress the persisted data"""
 
-    # None
     NONE = "none"
-    # Gzip
     GZIP = "gzip"
 
 
 class OutputConfluentCloudQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
-    # Block
     BLOCK = "block"
-    # Drop new data
     DROP = "drop"
 
 
 class OutputConfluentCloudMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
-    # Error
     ERROR = "error"
-    # Backpressure
     BACKPRESSURE = "backpressure"
-    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputcriblhttp.py

@@ -101,9 +101,7 @@ class OutputCriblHTTPTLSSettingsClientSide(BaseModel):
 class OutputCriblHTTPCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the data before sending"""
 
-    # None
     NONE = "none"
-    # Gzip
     GZIP = "gzip"
 
 
@@ -121,11 +119,8 @@ class OutputCriblHTTPExtraHTTPHeader(BaseModel):
 class OutputCriblHTTPFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
-    # Payload
     PAYLOAD = "payload"
-    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
-    # None
     NONE = "none"
 
 
@@ -186,11 +181,8 @@ class OutputCriblHTTPTimeoutRetrySettings(BaseModel):
 class OutputCriblHTTPBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
-    # Block
     BLOCK = "block"
-    # Drop
     DROP = "drop"
-    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -212,29 +204,22 @@ class OutputCriblHTTPURL(BaseModel):
 class OutputCriblHTTPPqCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
-    # None
     NONE = "none"
-    # Gzip
     GZIP = "gzip"
 
 
 class OutputCriblHTTPQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
-    # Block
     BLOCK = "block"
-    # Drop new data
     DROP = "drop"
 
 
 class OutputCriblHTTPMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
-    # Error
     ERROR = "error"
-    # Backpressure
     BACKPRESSURE = "backpressure"
-    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputcribllake.py

@@ -25,67 +25,46 @@ class OutputCriblLakeSignatureVersion(str, Enum, metaclass=utils.OpenEnumMeta):
 class OutputCriblLakeObjectACL(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Object ACL to assign to uploaded objects"""
 
-    # Private
     PRIVATE = "private"
-    # Public Read Only
     PUBLIC_READ = "public-read"
-    # Public Read/Write
     PUBLIC_READ_WRITE = "public-read-write"
-    # Authenticated Read Only
     AUTHENTICATED_READ = "authenticated-read"
-    # AWS EC2 AMI Read Only
     AWS_EXEC_READ = "aws-exec-read"
-    # Bucket Owner Read Only
     BUCKET_OWNER_READ = "bucket-owner-read"
-    # Bucket Owner Full Control
     BUCKET_OWNER_FULL_CONTROL = "bucket-owner-full-control"
 
 
 class OutputCriblLakeStorageClass(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Storage class to select for uploaded objects"""
 
-    # Standard
     STANDARD = "STANDARD"
-    # Reduced Redundancy Storage
     REDUCED_REDUNDANCY = "REDUCED_REDUNDANCY"
-    # Standard, Infrequent Access
     STANDARD_IA = "STANDARD_IA"
-    # One Zone, Infrequent Access
     ONEZONE_IA = "ONEZONE_IA"
-    # Intelligent Tiering
     INTELLIGENT_TIERING = "INTELLIGENT_TIERING"
-    # Glacier Flexible Retrieval
     GLACIER = "GLACIER"
-    # Glacier Instant Retrieval
     GLACIER_IR = "GLACIER_IR"
-    # Glacier Deep Archive
     DEEP_ARCHIVE = "DEEP_ARCHIVE"
 
 
 class OutputCriblLakeServerSideEncryptionForUploadedObjects(
     str, Enum, metaclass=utils.OpenEnumMeta
 ):
-    # Amazon S3 Managed Key
     AES256 = "AES256"
-    # AWS KMS Managed Key
     AWS_KMS = "aws:kms"
 
 
 class OutputCriblLakeBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
-    # Block
     BLOCK = "block"
-    # Drop
     DROP = "drop"
 
 
 class OutputCriblLakeDiskSpaceProtection(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when disk space is below the global 'Min free disk space' limit"""
 
-    # Block
     BLOCK = "block"
-    # Drop
     DROP = "drop"
 
 

cribl_control_plane/models/outputcribltcp.py

@@ -18,9 +18,7 @@ class OutputCriblTCPType(str, Enum):
 class OutputCriblTCPCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the data before sending"""
 
-    # None
     NONE = "none"
-    # Gzip
     GZIP = "gzip"
 
 
@@ -110,11 +108,8 @@ class OutputCriblTCPTLSSettingsClientSide(BaseModel):
 class OutputCriblTCPBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
-    # Block
     BLOCK = "block"
-    # Drop
     DROP = "drop"
-    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -160,29 +155,22 @@ class OutputCriblTCPHost(BaseModel):
 class OutputCriblTCPPqCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
-    # None
     NONE = "none"
-    # Gzip
     GZIP = "gzip"
 
 
 class OutputCriblTCPQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
-    # Block
     BLOCK = "block"
-    # Drop new data
     DROP = "drop"
 
 
 class OutputCriblTCPMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
-    # Error
     ERROR = "error"
-    # Backpressure
     BACKPRESSURE = "backpressure"
-    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputcrowdstrikenextgensiem.py

@@ -31,11 +31,8 @@ class OutputCrowdstrikeNextGenSiemFailedRequestLoggingMode(
 ):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
-    # Payload
     PAYLOAD = "payload"
-    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
-    # None
     NONE = "none"
 
 
@@ -44,9 +41,7 @@ class OutputCrowdstrikeNextGenSiemRequestFormat(
 ):
     r"""When set to JSON, the event is automatically formatted with required fields before sending. When set to Raw, only the event's `_raw` value is sent."""
 
-    # JSON
     JSON = "JSON"
-    # Raw
     RAW = "raw"
 
 
@@ -118,20 +113,15 @@ class OutputCrowdstrikeNextGenSiemBackpressureBehavior(
 ):
     r"""How to handle events when all receivers are exerting backpressure"""
 
-    # Block
     BLOCK = "block"
-    # Drop
     DROP = "drop"
-    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputCrowdstrikeNextGenSiemCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
-    # None
     NONE = "none"
-    # Gzip
     GZIP = "gzip"
 
 
@@ -140,20 +130,15 @@ class OutputCrowdstrikeNextGenSiemQueueFullBehavior(
 ):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
-    # Block
     BLOCK = "block"
-    # Drop new data
     DROP = "drop"
 
 
 class OutputCrowdstrikeNextGenSiemMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
-    # Error
     ERROR = "error"
-    # Backpressure
     BACKPRESSURE = "backpressure"
-    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputdatadog.py

@@ -18,49 +18,32 @@ class OutputDatadogType(str, Enum):
 class SendLogsAs(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""The content type to use when sending logs"""
 
-    # text/plain
     TEXT = "text"
-    # application/json
     JSON = "json"
 
 
 class OutputDatadogSeverity(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Default value for message severity. When you send logs as JSON objects, the event's '__severity' field (if set) will override this value."""
 
-    # emergency
     EMERGENCY = "emergency"
-    # alert
     ALERT = "alert"
-    # critical
     CRITICAL = "critical"
-    # error
     ERROR = "error"
-    # warning
     WARNING = "warning"
-    # notice
     NOTICE = "notice"
-    # info
     INFO = "info"
-    # debug
     DEBUG = "debug"
 
 
 class DatadogSite(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Datadog site to which events should be sent"""
 
-    # US
     US = "us"
-    # US3
     US3 = "us3"
-    # US5
     US5 = "us5"
-    # Europe
     EU = "eu"
-    # US1-FED
     FED1 = "fed1"
-    # AP1
     AP1 = "ap1"
-    # Custom
     CUSTOM = "custom"
 
 
@@ -78,11 +61,8 @@ class OutputDatadogExtraHTTPHeader(BaseModel):
 class OutputDatadogFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
-    # Payload
     PAYLOAD = "payload"
-    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
-    # None
     NONE = "none"
 
 
@@ -143,11 +123,8 @@ class OutputDatadogTimeoutRetrySettings(BaseModel):
 class OutputDatadogBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
-    # Block
     BLOCK = "block"
-    # Drop
     DROP = "drop"
-    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -161,29 +138,22 @@ class OutputDatadogAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta)
 class OutputDatadogCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
-    # None
     NONE = "none"
-    # Gzip
     GZIP = "gzip"
 
 
 class OutputDatadogQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
-    # Block
     BLOCK = "block"
-    # Drop new data
     DROP = "drop"
 
 
 class OutputDatadogMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
-    # Error
     ERROR = "error"
-    # Backpressure
     BACKPRESSURE = "backpressure"
-    # Always On
     ALWAYS = "always"