cribl-control-plane 0.1.0b2__py3-none-any.whl → 0.2.0b1__py3-none-any.whl

cribl_control_plane/models/outputsecuritylake.py

@@ -18,8 +18,11 @@ class OutputSecurityLakeType(str, Enum):
 class OutputSecurityLakeAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""AWS authentication method. Choose Auto to use IAM roles."""
 
+    # Auto
     AUTO = "auto"
+    # Manual
     MANUAL = "manual"
+    # Secret Key pair
     SECRET = "secret"
 
 
@@ -33,61 +36,87 @@ class OutputSecurityLakeSignatureVersion(str, Enum, metaclass=utils.OpenEnumMeta
 class OutputSecurityLakeObjectACL(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Object ACL to assign to uploaded objects"""
 
+    # Private
     PRIVATE = "private"
+    # Public Read Only
     PUBLIC_READ = "public-read"
+    # Public Read/Write
     PUBLIC_READ_WRITE = "public-read-write"
+    # Authenticated Read Only
     AUTHENTICATED_READ = "authenticated-read"
+    # AWS EC2 AMI Read Only
     AWS_EXEC_READ = "aws-exec-read"
+    # Bucket Owner Read Only
     BUCKET_OWNER_READ = "bucket-owner-read"
+    # Bucket Owner Full Control
     BUCKET_OWNER_FULL_CONTROL = "bucket-owner-full-control"
 
 
 class OutputSecurityLakeStorageClass(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Storage class to select for uploaded objects"""
 
+    # Standard
     STANDARD = "STANDARD"
+    # Reduced Redundancy Storage
     REDUCED_REDUNDANCY = "REDUCED_REDUNDANCY"
+    # Standard, Infrequent Access
     STANDARD_IA = "STANDARD_IA"
+    # One Zone, Infrequent Access
     ONEZONE_IA = "ONEZONE_IA"
+    # Intelligent Tiering
     INTELLIGENT_TIERING = "INTELLIGENT_TIERING"
+    # Glacier Flexible Retrieval
     GLACIER = "GLACIER"
+    # Glacier Instant Retrieval
     GLACIER_IR = "GLACIER_IR"
+    # Glacier Deep Archive
     DEEP_ARCHIVE = "DEEP_ARCHIVE"
 
 
 class OutputSecurityLakeServerSideEncryptionForUploadedObjects(
     str, Enum, metaclass=utils.OpenEnumMeta
 ):
+    # Amazon S3 Managed Key
     AES256 = "AES256"
+    # AWS KMS Managed Key
     AWS_KMS = "aws:kms"
 
 
 class OutputSecurityLakeBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
 
 
 class OutputSecurityLakeDiskSpaceProtection(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when disk space is below the global 'Min free disk space' limit"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
 
 
 class OutputSecurityLakeParquetVersion(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Determines which data types are supported and how they are represented"""
 
+    # 1.0
     PARQUET_1_0 = "PARQUET_1_0"
+    # 2.4
     PARQUET_2_4 = "PARQUET_2_4"
+    # 2.6
     PARQUET_2_6 = "PARQUET_2_6"
 
 
 class OutputSecurityLakeDataPageVersion(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Serialization format of data pages. Note that some reader implementations use Data page V2's attributes to work more efficiently, while others ignore it."""
 
+    # V1
     DATA_PAGE_V1 = "DATA_PAGE_V1"
+    # V2
     DATA_PAGE_V2 = "DATA_PAGE_V2"
 
 

cribl_control_plane/models/outputsentinel.py

@@ -29,8 +29,11 @@ class OutputSentinelExtraHTTPHeader(BaseModel):
 class OutputSentinelFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
@@ -91,8 +94,11 @@ class OutputSentinelTimeoutRetrySettings(BaseModel):
 class OutputSentinelBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -103,7 +109,9 @@ class AuthType(str, Enum, metaclass=utils.OpenEnumMeta):
 class EndpointConfiguration(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Enter the data collection endpoint URL or the individual ID"""
 
+    # URL
     URL = "url"
+    # ID
     ID = "ID"
 
 
@@ -117,22 +125,29 @@ class OutputSentinelFormat(str, Enum, metaclass=utils.OpenEnumMeta):
 class OutputSentinelCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputSentinelQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputSentinelMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputsentineloneaisiem.py

@@ -50,8 +50,11 @@ class OutputSentinelOneAiSiemFailedRequestLoggingMode(
 ):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
@@ -123,30 +126,40 @@ class OutputSentinelOneAiSiemBackpressureBehavior(
 ):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputSentinelOneAiSiemCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputSentinelOneAiSiemQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputSentinelOneAiSiemMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputservicenow.py

@@ -18,28 +18,36 @@ class OutputServiceNowType(str, Enum):
 class OutputServiceNowOTLPVersion(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""The version of OTLP Protobuf definitions to use when structuring data to send"""
 
+    # 1.3.1
     ONE_DOT_3_DOT_1 = "1.3.1"
 
 
 class OutputServiceNowProtocol(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Select a transport option for OpenTelemetry"""
 
+    # gRPC
     GRPC = "grpc"
+    # HTTP
     HTTP = "http"
 
 
 class OutputServiceNowCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Type of compression to apply to messages sent to the OpenTelemetry endpoint"""
 
+    # None
     NONE = "none"
+    # Deflate
     DEFLATE = "deflate"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputServiceNowHTTPCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Type of compression to apply to messages sent to the OpenTelemetry endpoint"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
@@ -57,16 +65,22 @@ class OutputServiceNowMetadatum(BaseModel):
 class OutputServiceNowFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
 class OutputServiceNowBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -216,22 +230,29 @@ class OutputServiceNowTLSSettingsClientSide(BaseModel):
 class OutputServiceNowPqCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputServiceNowQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputServiceNowMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputsignalfx.py

@@ -36,8 +36,11 @@ class OutputSignalfxExtraHTTPHeader(BaseModel):
 class OutputSignalfxFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
@@ -98,30 +101,40 @@ class OutputSignalfxTimeoutRetrySettings(BaseModel):
 class OutputSignalfxBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputSignalfxCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputSignalfxQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputSignalfxMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputsns.py

@@ -18,8 +18,11 @@ class OutputSnsType(str, Enum):
 class OutputSnsAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""AWS authentication method. Choose Auto to use IAM roles."""
 
+    # Auto
     AUTO = "auto"
+    # Manual
     MANUAL = "manual"
+    # Secret Key pair
     SECRET = "secret"
 
 
@@ -33,30 +36,40 @@ class OutputSnsSignatureVersion(str, Enum, metaclass=utils.OpenEnumMeta):
 class OutputSnsBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputSnsCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputSnsQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputSnsMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputsplunk.py

@@ -18,7 +18,9 @@ class OutputSplunkType(str, Enum):
 class OutputSplunkNestedFieldSerialization(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to serialize nested fields into index-time fields"""
 
+    # JSON
     JSON = "json"
+    # None
     NONE = "none"
 
 
@@ -115,8 +117,11 @@ class OutputSplunkMaxS2SVersion(str, Enum, metaclass=utils.OpenEnumMeta):
 class OutputSplunkBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -130,30 +135,40 @@ class OutputSplunkAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta):
 class OutputSplunkCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Controls whether the sender should send compressed data to the server. Select 'Disabled' to reject compressed connections or 'Always' to ignore server's configuration and send compressed data."""
 
+    # Disabled
     DISABLED = "disabled"
+    # Automatic
     AUTO = "auto"
+    # Always
     ALWAYS = "always"
 
 
 class OutputSplunkPqCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputSplunkQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputSplunkMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputsplunkhec.py

@@ -29,8 +29,11 @@ class OutputSplunkHecExtraHTTPHeader(BaseModel):
 class OutputSplunkHecFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
@@ -98,8 +101,11 @@ class OutputSplunkHecTimeoutRetrySettings(BaseModel):
 class OutputSplunkHecBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -121,22 +127,29 @@ class OutputSplunkHecURL(BaseModel):
 class OutputSplunkHecCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputSplunkHecQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputSplunkHecMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputsplunklb.py

@@ -18,7 +18,9 @@ class OutputSplunkLbType(str, Enum):
 class OutputSplunkLbNestedFieldSerialization(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to serialize nested fields into index-time fields"""
 
+    # JSON
     JSON = "json"
+    # None
     NONE = "none"
 
 
@@ -115,8 +117,11 @@ class OutputSplunkLbMaxS2SVersion(str, Enum, metaclass=utils.OpenEnumMeta):
 class OutputSplunkLbBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -130,8 +135,11 @@ class OutputSplunkLbAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta
 class OutputSplunkLbCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Controls whether the sender should send compressed data to the server. Select 'Disabled' to reject compressed connections or 'Always' to ignore server's configuration and send compressed data."""
 
+    # Disabled
     DISABLED = "disabled"
+    # Automatic
     AUTO = "auto"
+    # Always
     ALWAYS = "always"
 
 
@@ -272,22 +280,29 @@ class OutputSplunkLbHost(BaseModel):
 class OutputSplunkLbPqCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputSplunkLbQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputSplunkLbMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"