cribl-control-plane 0.1.0b1__py3-none-any.whl → 0.1.1rc1__py3-none-any.whl

cribl_control_plane/models/outputsplunk.py

@@ -18,7 +18,9 @@ class OutputSplunkType(str, Enum):
 class OutputSplunkNestedFieldSerialization(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to serialize nested fields into index-time fields"""
 
+    # JSON
     JSON = "json"
+    # None
     NONE = "none"
 
 
@@ -115,8 +117,11 @@ class OutputSplunkMaxS2SVersion(str, Enum, metaclass=utils.OpenEnumMeta):
 class OutputSplunkBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -130,30 +135,40 @@ class OutputSplunkAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta):
 class OutputSplunkCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Controls whether the sender should send compressed data to the server. Select 'Disabled' to reject compressed connections or 'Always' to ignore server's configuration and send compressed data."""
 
+    # Disabled
     DISABLED = "disabled"
+    # Automatic
     AUTO = "auto"
+    # Always
     ALWAYS = "always"
 
 
 class OutputSplunkPqCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputSplunkQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputSplunkMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputsplunkhec.py

@@ -29,8 +29,11 @@ class OutputSplunkHecExtraHTTPHeader(BaseModel):
 class OutputSplunkHecFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
@@ -98,8 +101,11 @@ class OutputSplunkHecTimeoutRetrySettings(BaseModel):
 class OutputSplunkHecBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -121,22 +127,29 @@ class OutputSplunkHecURL(BaseModel):
 class OutputSplunkHecCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputSplunkHecQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputSplunkHecMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputsplunklb.py

@@ -18,7 +18,9 @@ class OutputSplunkLbType(str, Enum):
 class OutputSplunkLbNestedFieldSerialization(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to serialize nested fields into index-time fields"""
 
+    # JSON
     JSON = "json"
+    # None
     NONE = "none"
 
 
@@ -115,8 +117,11 @@ class OutputSplunkLbMaxS2SVersion(str, Enum, metaclass=utils.OpenEnumMeta):
 class OutputSplunkLbBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -130,8 +135,11 @@ class OutputSplunkLbAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta
 class OutputSplunkLbCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Controls whether the sender should send compressed data to the server. Select 'Disabled' to reject compressed connections or 'Always' to ignore server's configuration and send compressed data."""
 
+    # Disabled
     DISABLED = "disabled"
+    # Automatic
     AUTO = "auto"
+    # Always
     ALWAYS = "always"
 
 
@@ -272,22 +280,29 @@ class OutputSplunkLbHost(BaseModel):
 class OutputSplunkLbPqCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputSplunkLbQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputSplunkLbMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputsqs.py

@@ -18,15 +18,20 @@ class OutputSqsType(str, Enum):
 class OutputSqsQueueType(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""The queue type used (or created). Defaults to Standard."""
 
+    # Standard
     STANDARD = "standard"
+    # FIFO
     FIFO = "fifo"
 
 
 class OutputSqsAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""AWS authentication method. Choose Auto to use IAM roles."""
 
+    # Auto
     AUTO = "auto"
+    # Manual
     MANUAL = "manual"
+    # Secret Key pair
     SECRET = "secret"
 
 
@@ -40,30 +45,40 @@ class OutputSqsSignatureVersion(str, Enum, metaclass=utils.OpenEnumMeta):
 class OutputSqsBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputSqsCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputSqsQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputSqsMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 
@@ -79,6 +94,8 @@ class OutputSqsTypedDict(TypedDict):
     type: OutputSqsType
     queue_name: str
     r"""The name, URL, or ARN of the SQS queue to send events to. When a non-AWS URL is specified, format must be: '{url}/myQueueName'. Example: 'https://host:port/myQueueName'. Must be a JavaScript expression (which can evaluate to a constant value), enclosed in quotes or backticks. Can be evaluated only at init time. Example referencing a Global Variable: `https://host:port/myQueue-${C.vars.myVar}`."""
+    queue_type: OutputSqsQueueType
+    r"""The queue type used (or created). Defaults to Standard."""
     id: NotRequired[str]
     r"""Unique ID for this output"""
     pipeline: NotRequired[str]
@@ -89,8 +106,6 @@ class OutputSqsTypedDict(TypedDict):
     r"""Optionally, enable this config only on a specified Git branch. If empty, will be enabled everywhere."""
     streamtags: NotRequired[List[str]]
     r"""Tags for filtering and grouping in @{product}"""
-    queue_type: NotRequired[OutputSqsQueueType]
-    r"""The queue type used (or created). Defaults to Standard."""
     aws_account_id: NotRequired[str]
     r"""SQS queue owner's AWS account ID. Leave empty if SQS queue is in same AWS account."""
     message_group_id: NotRequired[str]
@@ -153,6 +168,12 @@ class OutputSqs(BaseModel):
     queue_name: Annotated[str, pydantic.Field(alias="queueName")]
     r"""The name, URL, or ARN of the SQS queue to send events to. When a non-AWS URL is specified, format must be: '{url}/myQueueName'. Example: 'https://host:port/myQueueName'. Must be a JavaScript expression (which can evaluate to a constant value), enclosed in quotes or backticks. Can be evaluated only at init time. Example referencing a Global Variable: `https://host:port/myQueue-${C.vars.myVar}`."""
 
+    queue_type: Annotated[
+        Annotated[OutputSqsQueueType, PlainValidator(validate_open_enum(False))],
+        pydantic.Field(alias="queueType"),
+    ]
+    r"""The queue type used (or created). Defaults to Standard."""
+
     id: Optional[str] = None
     r"""Unique ID for this output"""
 
@@ -170,14 +191,6 @@ class OutputSqs(BaseModel):
     streamtags: Optional[List[str]] = None
     r"""Tags for filtering and grouping in @{product}"""
 
-    queue_type: Annotated[
-        Annotated[
-            Optional[OutputSqsQueueType], PlainValidator(validate_open_enum(False))
-        ],
-        pydantic.Field(alias="queueType"),
-    ] = OutputSqsQueueType.STANDARD
-    r"""The queue type used (or created). Defaults to Standard."""
-
     aws_account_id: Annotated[Optional[str], pydantic.Field(alias="awsAccountId")] = (
         None
     )

cribl_control_plane/models/outputstatsd.py

@@ -18,37 +18,49 @@ class OutputStatsdType(str, Enum):
 class OutputStatsdDestinationProtocol(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Protocol to use when communicating with the destination."""
 
+    # UDP
     UDP = "udp"
+    # TCP
     TCP = "tcp"
 
 
 class OutputStatsdBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputStatsdCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputStatsdQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputStatsdMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputstatsdext.py

@@ -18,37 +18,49 @@ class OutputStatsdExtType(str, Enum):
 class OutputStatsdExtDestinationProtocol(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Protocol to use when communicating with the destination."""
 
+    # UDP
     UDP = "udp"
+    # TCP
     TCP = "tcp"
 
 
 class OutputStatsdExtBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputStatsdExtCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputStatsdExtQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputStatsdExtMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputsumologic.py

@@ -18,7 +18,9 @@ class OutputSumoLogicType(str, Enum):
 class OutputSumoLogicDataFormat(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Preserve the raw event format instead of JSONifying it"""
 
+    # JSON
     JSON = "json"
+    # Raw
     RAW = "raw"
 
 
@@ -36,8 +38,11 @@ class OutputSumoLogicExtraHTTPHeader(BaseModel):
 class OutputSumoLogicFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
@@ -98,30 +103,40 @@ class OutputSumoLogicTimeoutRetrySettings(BaseModel):
 class OutputSumoLogicBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputSumoLogicCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputSumoLogicQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputSumoLogicMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputsyslog.py

@@ -18,7 +18,9 @@ class OutputSyslogType(str, Enum):
 class OutputSyslogProtocol(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""The network protocol to use for sending out syslog messages"""
 
+    # TCP
     TCP = "tcp"
+    # UDP
     UDP = "udp"
 
 
@@ -52,27 +54,39 @@ class Facility(int, Enum, metaclass=utils.OpenEnumMeta):
 class OutputSyslogSeverity(int, Enum, metaclass=utils.OpenEnumMeta):
     r"""Default value for message severity. Will be overwritten by value of __severity if set. Defaults to notice."""
 
+    # emergency
     ZERO = 0
+    # alert
     ONE = 1
+    # critical
     TWO = 2
+    # error
     THREE = 3
+    # warning
     FOUR = 4
+    # notice
     FIVE = 5
+    # info
     SIX = 6
+    # debug
     SEVEN = 7
 
 
 class OutputSyslogMessageFormat(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""The syslog message format depending on the receiver's support"""
 
+    # RFC3164
     RFC3164 = "rfc3164"
+    # RFC5424
     RFC5424 = "rfc5424"
 
 
 class TimestampFormat(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Timestamp format to use when serializing event's time field"""
 
+    # Syslog
     SYSLOG = "syslog"
+    # ISO8601
     ISO8601 = "iso8601"
 
 
@@ -162,30 +176,40 @@ class OutputSyslogTLSSettingsClientSide(BaseModel):
 class OutputSyslogBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputSyslogCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputSyslogQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputSyslogMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputtcpjson.py

@@ -18,7 +18,9 @@ class OutputTcpjsonType(str, Enum):
 class OutputTcpjsonCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the data before sending"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
@@ -108,8 +110,11 @@ class OutputTcpjsonTLSSettingsClientSide(BaseModel):
 class OutputTcpjsonBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
@@ -162,22 +167,29 @@ class OutputTcpjsonHost(BaseModel):
 class OutputTcpjsonPqCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputTcpjsonQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputTcpjsonMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"
 
 

cribl_control_plane/models/outputwavefront.py

@@ -36,8 +36,11 @@ class OutputWavefrontExtraHTTPHeader(BaseModel):
 class OutputWavefrontFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
+    # Payload
     PAYLOAD = "payload"
+    # Payload + Headers
     PAYLOAD_AND_HEADERS = "payloadAndHeaders"
+    # None
     NONE = "none"
 
 
@@ -98,30 +101,40 @@ class OutputWavefrontTimeoutRetrySettings(BaseModel):
 class OutputWavefrontBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
+    # Block
     BLOCK = "block"
+    # Drop
     DROP = "drop"
+    # Persistent Queue
     QUEUE = "queue"
 
 
 class OutputWavefrontCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
+    # None
     NONE = "none"
+    # Gzip
     GZIP = "gzip"
 
 
 class OutputWavefrontQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
+    # Block
     BLOCK = "block"
+    # Drop new data
     DROP = "drop"
 
 
 class OutputWavefrontMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
+    # Error
     ERROR = "error"
+    # Backpressure
     BACKPRESSURE = "backpressure"
+    # Always On
     ALWAYS = "always"