cribl-control-plane 0.0.50__py3-none-any.whl → 0.0.50rc2__py3-none-any.whl

cribl_control_plane/models/outputhoneycomb.py

@@ -1,9 +1,12 @@
 """Code generated by Speakeasy (https://speakeasy.com). DO NOT EDIT."""
 
 from __future__ import annotations
+from cribl_control_plane import utils
 from cribl_control_plane.types import BaseModel
+from cribl_control_plane.utils import validate_open_enum
 from enum import Enum
 import pydantic
+from pydantic.functional_validators import PlainValidator
 from typing import List, Optional
 from typing_extensions import Annotated, NotRequired, TypedDict
 
@@ -23,7 +26,7 @@ class OutputHoneycombExtraHTTPHeader(BaseModel):
     name: Optional[str] = None
 
 
-class OutputHoneycombFailedRequestLoggingMode(str, Enum):
+class OutputHoneycombFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
     PAYLOAD = "payload"
@@ -85,7 +88,7 @@ class OutputHoneycombTimeoutRetrySettings(BaseModel):
     r"""The maximum backoff interval, in milliseconds, Cribl Stream should apply. Default (and minimum) is 10,000 ms (10 seconds); maximum is 180,000 ms (180 seconds)."""
 
 
-class OutputHoneycombBackpressureBehavior(str, Enum):
+class OutputHoneycombBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
     BLOCK = "block"
@@ -93,28 +96,28 @@ class OutputHoneycombBackpressureBehavior(str, Enum):
     QUEUE = "queue"
 
 
-class OutputHoneycombAuthenticationMethod(str, Enum):
+class OutputHoneycombAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Enter API key directly, or select a stored secret"""
 
     MANUAL = "manual"
     SECRET = "secret"
 
 
-class OutputHoneycombCompression(str, Enum):
+class OutputHoneycombCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
     NONE = "none"
     GZIP = "gzip"
 
 
-class OutputHoneycombQueueFullBehavior(str, Enum):
+class OutputHoneycombQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
     BLOCK = "block"
     DROP = "drop"
 
 
-class OutputHoneycombMode(str, Enum):
+class OutputHoneycombMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
     ERROR = "error"
@@ -267,7 +270,10 @@ class OutputHoneycomb(BaseModel):
     r"""Enable round-robin DNS lookup. When a DNS server returns multiple addresses, @{product} will cycle through them in the order returned. For optimal performance, consider enabling this setting for non-load balanced destinations."""
 
     failed_request_logging_mode: Annotated[
-        Optional[OutputHoneycombFailedRequestLoggingMode],
+        Annotated[
+            Optional[OutputHoneycombFailedRequestLoggingMode],
+            PlainValidator(validate_open_enum(False)),
+        ],
         pydantic.Field(alias="failedRequestLoggingMode"),
     ] = OutputHoneycombFailedRequestLoggingMode.NONE
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
@@ -294,13 +300,20 @@ class OutputHoneycomb(BaseModel):
     r"""Honor any Retry-After header that specifies a delay (in seconds) no longer than 180 seconds after the retry request. @{product} limits the delay to 180 seconds, even if the Retry-After header specifies a longer delay. When enabled, takes precedence over user-configured retry options. When disabled, all Retry-After headers are ignored."""
 
     on_backpressure: Annotated[
-        Optional[OutputHoneycombBackpressureBehavior],
+        Annotated[
+            Optional[OutputHoneycombBackpressureBehavior],
+            PlainValidator(validate_open_enum(False)),
+        ],
         pydantic.Field(alias="onBackpressure"),
     ] = OutputHoneycombBackpressureBehavior.BLOCK
     r"""How to handle events when all receivers are exerting backpressure"""
 
     auth_type: Annotated[
-        Optional[OutputHoneycombAuthenticationMethod], pydantic.Field(alias="authType")
+        Annotated[
+            Optional[OutputHoneycombAuthenticationMethod],
+            PlainValidator(validate_open_enum(False)),
+        ],
+        pydantic.Field(alias="authType"),
     ] = OutputHoneycombAuthenticationMethod.MANUAL
     r"""Enter API key directly, or select a stored secret"""
 
@@ -320,18 +333,28 @@ class OutputHoneycomb(BaseModel):
     r"""The location for the persistent queue files. To this field's value, the system will append: /<worker-id>/<output-id>."""
 
     pq_compress: Annotated[
-        Optional[OutputHoneycombCompression], pydantic.Field(alias="pqCompress")
+        Annotated[
+            Optional[OutputHoneycombCompression],
+            PlainValidator(validate_open_enum(False)),
+        ],
+        pydantic.Field(alias="pqCompress"),
     ] = OutputHoneycombCompression.NONE
     r"""Codec to use to compress the persisted data"""
 
     pq_on_backpressure: Annotated[
-        Optional[OutputHoneycombQueueFullBehavior],
+        Annotated[
+            Optional[OutputHoneycombQueueFullBehavior],
+            PlainValidator(validate_open_enum(False)),
+        ],
         pydantic.Field(alias="pqOnBackpressure"),
     ] = OutputHoneycombQueueFullBehavior.BLOCK
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
     pq_mode: Annotated[
-        Optional[OutputHoneycombMode], pydantic.Field(alias="pqMode")
+        Annotated[
+            Optional[OutputHoneycombMode], PlainValidator(validate_open_enum(False))
+        ],
+        pydantic.Field(alias="pqMode"),
     ] = OutputHoneycombMode.ERROR
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 

cribl_control_plane/models/outputhumiohec.py

@@ -1,9 +1,12 @@
 """Code generated by Speakeasy (https://speakeasy.com). DO NOT EDIT."""
 
 from __future__ import annotations
+from cribl_control_plane import utils
 from cribl_control_plane.types import BaseModel
+from cribl_control_plane.utils import validate_open_enum
 from enum import Enum
 import pydantic
+from pydantic.functional_validators import PlainValidator
 from typing import List, Optional
 from typing_extensions import Annotated, NotRequired, TypedDict
 
@@ -23,7 +26,7 @@ class OutputHumioHecExtraHTTPHeader(BaseModel):
     name: Optional[str] = None
 
 
-class OutputHumioHecFailedRequestLoggingMode(str, Enum):
+class OutputHumioHecFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
     PAYLOAD = "payload"
@@ -31,14 +34,14 @@ class OutputHumioHecFailedRequestLoggingMode(str, Enum):
     NONE = "none"
 
 
-class OutputHumioHecRequestFormat(str, Enum):
+class OutputHumioHecRequestFormat(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""When set to JSON, the event is automatically formatted with required fields before sending. When set to Raw, only the event's `_raw` value is sent."""
 
     JSON = "JSON"
     RAW = "raw"
 
 
-class OutputHumioHecAuthenticationMethod(str, Enum):
+class OutputHumioHecAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Select Manual to enter an auth token directly, or select Secret to use a text secret to authenticate"""
 
     MANUAL = "manual"
@@ -99,7 +102,7 @@ class OutputHumioHecTimeoutRetrySettings(BaseModel):
     r"""The maximum backoff interval, in milliseconds, Cribl Stream should apply. Default (and minimum) is 10,000 ms (10 seconds); maximum is 180,000 ms (180 seconds)."""
 
 
-class OutputHumioHecBackpressureBehavior(str, Enum):
+class OutputHumioHecBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
     BLOCK = "block"
@@ -107,21 +110,21 @@ class OutputHumioHecBackpressureBehavior(str, Enum):
     QUEUE = "queue"
 
 
-class OutputHumioHecCompression(str, Enum):
+class OutputHumioHecCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
     NONE = "none"
     GZIP = "gzip"
 
 
-class OutputHumioHecQueueFullBehavior(str, Enum):
+class OutputHumioHecQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
     BLOCK = "block"
     DROP = "drop"
 
 
-class OutputHumioHecMode(str, Enum):
+class OutputHumioHecMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
     ERROR = "error"
@@ -276,7 +279,10 @@ class OutputHumioHec(BaseModel):
     r"""Enable round-robin DNS lookup. When a DNS server returns multiple addresses, @{product} will cycle through them in the order returned. For optimal performance, consider enabling this setting for non-load balanced destinations."""
 
     failed_request_logging_mode: Annotated[
-        Optional[OutputHumioHecFailedRequestLoggingMode],
+        Annotated[
+            Optional[OutputHumioHecFailedRequestLoggingMode],
+            PlainValidator(validate_open_enum(False)),
+        ],
         pydantic.Field(alias="failedRequestLoggingMode"),
     ] = OutputHumioHecFailedRequestLoggingMode.NONE
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
@@ -287,12 +293,20 @@ class OutputHumioHec(BaseModel):
     r"""List of headers that are safe to log in plain text"""
 
     format_: Annotated[
-        Optional[OutputHumioHecRequestFormat], pydantic.Field(alias="format")
+        Annotated[
+            Optional[OutputHumioHecRequestFormat],
+            PlainValidator(validate_open_enum(False)),
+        ],
+        pydantic.Field(alias="format"),
     ] = OutputHumioHecRequestFormat.JSON
     r"""When set to JSON, the event is automatically formatted with required fields before sending. When set to Raw, only the event's `_raw` value is sent."""
 
     auth_type: Annotated[
-        Optional[OutputHumioHecAuthenticationMethod], pydantic.Field(alias="authType")
+        Annotated[
+            Optional[OutputHumioHecAuthenticationMethod],
+            PlainValidator(validate_open_enum(False)),
+        ],
+        pydantic.Field(alias="authType"),
     ] = OutputHumioHecAuthenticationMethod.MANUAL
     r"""Select Manual to enter an auth token directly, or select Secret to use a text secret to authenticate"""
 
@@ -313,7 +327,10 @@ class OutputHumioHec(BaseModel):
     r"""Honor any Retry-After header that specifies a delay (in seconds) no longer than 180 seconds after the retry request. @{product} limits the delay to 180 seconds, even if the Retry-After header specifies a longer delay. When enabled, takes precedence over user-configured retry options. When disabled, all Retry-After headers are ignored."""
 
     on_backpressure: Annotated[
-        Optional[OutputHumioHecBackpressureBehavior],
+        Annotated[
+            Optional[OutputHumioHecBackpressureBehavior],
+            PlainValidator(validate_open_enum(False)),
+        ],
         pydantic.Field(alias="onBackpressure"),
     ] = OutputHumioHecBackpressureBehavior.BLOCK
     r"""How to handle events when all receivers are exerting backpressure"""
@@ -340,19 +357,29 @@ class OutputHumioHec(BaseModel):
     r"""The location for the persistent queue files. To this field's value, the system will append: /<worker-id>/<output-id>."""
 
     pq_compress: Annotated[
-        Optional[OutputHumioHecCompression], pydantic.Field(alias="pqCompress")
+        Annotated[
+            Optional[OutputHumioHecCompression],
+            PlainValidator(validate_open_enum(False)),
+        ],
+        pydantic.Field(alias="pqCompress"),
     ] = OutputHumioHecCompression.NONE
     r"""Codec to use to compress the persisted data"""
 
     pq_on_backpressure: Annotated[
-        Optional[OutputHumioHecQueueFullBehavior],
+        Annotated[
+            Optional[OutputHumioHecQueueFullBehavior],
+            PlainValidator(validate_open_enum(False)),
+        ],
         pydantic.Field(alias="pqOnBackpressure"),
     ] = OutputHumioHecQueueFullBehavior.BLOCK
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
-    pq_mode: Annotated[Optional[OutputHumioHecMode], pydantic.Field(alias="pqMode")] = (
-        OutputHumioHecMode.ERROR
-    )
+    pq_mode: Annotated[
+        Annotated[
+            Optional[OutputHumioHecMode], PlainValidator(validate_open_enum(False))
+        ],
+        pydantic.Field(alias="pqMode"),
+    ] = OutputHumioHecMode.ERROR
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
     pq_controls: Annotated[

cribl_control_plane/models/outputinfluxdb.py

@@ -1,9 +1,12 @@
 """Code generated by Speakeasy (https://speakeasy.com). DO NOT EDIT."""
 
 from __future__ import annotations
+from cribl_control_plane import utils
 from cribl_control_plane.types import BaseModel
+from cribl_control_plane.utils import validate_open_enum
 from enum import Enum
 import pydantic
+from pydantic.functional_validators import PlainValidator
 from typing import List, Optional
 from typing_extensions import Annotated, NotRequired, TypedDict
 
@@ -12,7 +15,7 @@ class OutputInfluxdbType(str, Enum):
     INFLUXDB = "influxdb"
 
 
-class TimestampPrecision(str, Enum):
+class TimestampPrecision(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Sets the precision for the supplied Unix time values. Defaults to milliseconds."""
 
     NS = "ns"
@@ -34,7 +37,7 @@ class OutputInfluxdbExtraHTTPHeader(BaseModel):
     name: Optional[str] = None
 
 
-class OutputInfluxdbFailedRequestLoggingMode(str, Enum):
+class OutputInfluxdbFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
     PAYLOAD = "payload"
@@ -96,7 +99,7 @@ class OutputInfluxdbTimeoutRetrySettings(BaseModel):
     r"""The maximum backoff interval, in milliseconds, Cribl Stream should apply. Default (and minimum) is 10,000 ms (10 seconds); maximum is 180,000 ms (180 seconds)."""
 
 
-class OutputInfluxdbBackpressureBehavior(str, Enum):
+class OutputInfluxdbBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when all receivers are exerting backpressure"""
 
     BLOCK = "block"
@@ -104,7 +107,7 @@ class OutputInfluxdbBackpressureBehavior(str, Enum):
     QUEUE = "queue"
 
 
-class OutputInfluxdbAuthenticationType(str, Enum):
+class OutputInfluxdbAuthenticationType(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""InfluxDB authentication type"""
 
     NONE = "none"
@@ -115,21 +118,21 @@ class OutputInfluxdbAuthenticationType(str, Enum):
     OAUTH = "oauth"
 
 
-class OutputInfluxdbCompression(str, Enum):
+class OutputInfluxdbCompression(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""Codec to use to compress the persisted data"""
 
     NONE = "none"
     GZIP = "gzip"
 
 
-class OutputInfluxdbQueueFullBehavior(str, Enum):
+class OutputInfluxdbQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
     BLOCK = "block"
     DROP = "drop"
 
 
-class OutputInfluxdbMode(str, Enum):
+class OutputInfluxdbMode(str, Enum, metaclass=utils.OpenEnumMeta):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
     ERROR = "error"
@@ -306,7 +309,10 @@ class OutputInfluxdb(BaseModel):
     r"""The v2 API can be enabled with InfluxDB versions 1.8 and later."""
 
     timestamp_precision: Annotated[
-        Optional[TimestampPrecision], pydantic.Field(alias="timestampPrecision")
+        Annotated[
+            Optional[TimestampPrecision], PlainValidator(validate_open_enum(False))
+        ],
+        pydantic.Field(alias="timestampPrecision"),
     ] = TimestampPrecision.MS
     r"""Sets the precision for the supplied Unix time values. Defaults to milliseconds."""
 
@@ -364,7 +370,10 @@ class OutputInfluxdb(BaseModel):
     r"""Enable round-robin DNS lookup. When a DNS server returns multiple addresses, @{product} will cycle through them in the order returned. For optimal performance, consider enabling this setting for non-load balanced destinations."""
 
     failed_request_logging_mode: Annotated[
-        Optional[OutputInfluxdbFailedRequestLoggingMode],
+        Annotated[
+            Optional[OutputInfluxdbFailedRequestLoggingMode],
+            PlainValidator(validate_open_enum(False)),
+        ],
         pydantic.Field(alias="failedRequestLoggingMode"),
     ] = OutputInfluxdbFailedRequestLoggingMode.NONE
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
@@ -391,13 +400,20 @@ class OutputInfluxdb(BaseModel):
     r"""Honor any Retry-After header that specifies a delay (in seconds) no longer than 180 seconds after the retry request. @{product} limits the delay to 180 seconds, even if the Retry-After header specifies a longer delay. When enabled, takes precedence over user-configured retry options. When disabled, all Retry-After headers are ignored."""
 
     on_backpressure: Annotated[
-        Optional[OutputInfluxdbBackpressureBehavior],
+        Annotated[
+            Optional[OutputInfluxdbBackpressureBehavior],
+            PlainValidator(validate_open_enum(False)),
+        ],
         pydantic.Field(alias="onBackpressure"),
     ] = OutputInfluxdbBackpressureBehavior.BLOCK
     r"""How to handle events when all receivers are exerting backpressure"""
 
     auth_type: Annotated[
-        Optional[OutputInfluxdbAuthenticationType], pydantic.Field(alias="authType")
+        Annotated[
+            Optional[OutputInfluxdbAuthenticationType],
+            PlainValidator(validate_open_enum(False)),
+        ],
+        pydantic.Field(alias="authType"),
     ] = OutputInfluxdbAuthenticationType.NONE
     r"""InfluxDB authentication type"""
 
@@ -426,19 +442,29 @@ class OutputInfluxdb(BaseModel):
     r"""The location for the persistent queue files. To this field's value, the system will append: /<worker-id>/<output-id>."""
 
     pq_compress: Annotated[
-        Optional[OutputInfluxdbCompression], pydantic.Field(alias="pqCompress")
+        Annotated[
+            Optional[OutputInfluxdbCompression],
+            PlainValidator(validate_open_enum(False)),
+        ],
+        pydantic.Field(alias="pqCompress"),
     ] = OutputInfluxdbCompression.NONE
     r"""Codec to use to compress the persisted data"""
 
     pq_on_backpressure: Annotated[
-        Optional[OutputInfluxdbQueueFullBehavior],
+        Annotated[
+            Optional[OutputInfluxdbQueueFullBehavior],
+            PlainValidator(validate_open_enum(False)),
+        ],
         pydantic.Field(alias="pqOnBackpressure"),
     ] = OutputInfluxdbQueueFullBehavior.BLOCK
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
-    pq_mode: Annotated[Optional[OutputInfluxdbMode], pydantic.Field(alias="pqMode")] = (
-        OutputInfluxdbMode.ERROR
-    )
+    pq_mode: Annotated[
+        Annotated[
+            Optional[OutputInfluxdbMode], PlainValidator(validate_open_enum(False))
+        ],
+        pydantic.Field(alias="pqMode"),
+    ] = OutputInfluxdbMode.ERROR
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
     pq_controls: Annotated[