cribl-control-plane 0.0.48a1__py3-none-any.whl → 0.0.49__py3-none-any.whl

cribl_control_plane/models/outputsyslog.py

@@ -1,12 +1,9 @@
 """Code generated by Speakeasy (https://speakeasy.com). DO NOT EDIT."""
 
 from __future__ import annotations
-from cribl_control_plane import utils
 from cribl_control_plane.types import BaseModel
-from cribl_control_plane.utils import validate_open_enum
 from enum import Enum
 import pydantic
-from pydantic.functional_validators import PlainValidator
 from typing import List, Optional
 from typing_extensions import Annotated, NotRequired, TypedDict
 
@@ -15,14 +12,14 @@ class OutputSyslogType(str, Enum):
     SYSLOG = "syslog"
 
 
-class OutputSyslogProtocol(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputSyslogProtocol(str, Enum):
     r"""The network protocol to use for sending out syslog messages"""
 
     TCP = "tcp"
     UDP = "udp"
 
 
-class Facility(int, Enum, metaclass=utils.OpenEnumMeta):
+class Facility(int, Enum):
     r"""Default value for message facility. Will be overwritten by value of __facility if set. Defaults to user."""
 
     ZERO = 0
@@ -49,7 +46,7 @@ class Facility(int, Enum, metaclass=utils.OpenEnumMeta):
     TWENTY_ONE = 21
 
 
-class OutputSyslogSeverity(int, Enum, metaclass=utils.OpenEnumMeta):
+class OutputSyslogSeverity(int, Enum):
     r"""Default value for message severity. Will be overwritten by value of __severity if set. Defaults to notice."""
 
     ZERO = 0
@@ -62,28 +59,28 @@ class OutputSyslogSeverity(int, Enum, metaclass=utils.OpenEnumMeta):
     SEVEN = 7
 
 
-class OutputSyslogMessageFormat(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputSyslogMessageFormat(str, Enum):
     r"""The syslog message format depending on the receiver's support"""
 
     RFC3164 = "rfc3164"
     RFC5424 = "rfc5424"
 
 
-class TimestampFormat(str, Enum, metaclass=utils.OpenEnumMeta):
+class TimestampFormat(str, Enum):
     r"""Timestamp format to use when serializing event's time field"""
 
     SYSLOG = "syslog"
     ISO8601 = "iso8601"
 
 
-class OutputSyslogMinimumTLSVersion(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputSyslogMinimumTLSVersion(str, Enum):
     TL_SV1 = "TLSv1"
     TL_SV1_1 = "TLSv1.1"
     TL_SV1_2 = "TLSv1.2"
     TL_SV1_3 = "TLSv1.3"
 
 
-class OutputSyslogMaximumTLSVersion(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputSyslogMaximumTLSVersion(str, Enum):
     TL_SV1 = "TLSv1"
     TL_SV1_1 = "TLSv1.1"
     TL_SV1_2 = "TLSv1.2"
@@ -143,23 +140,15 @@ class OutputSyslogTLSSettingsClientSide(BaseModel):
     r"""Passphrase to use to decrypt private key"""
 
     min_version: Annotated[
-        Annotated[
-            Optional[OutputSyslogMinimumTLSVersion],
-            PlainValidator(validate_open_enum(False)),
-        ],
-        pydantic.Field(alias="minVersion"),
+        Optional[OutputSyslogMinimumTLSVersion], pydantic.Field(alias="minVersion")
     ] = None
 
     max_version: Annotated[
-        Annotated[
-            Optional[OutputSyslogMaximumTLSVersion],
-            PlainValidator(validate_open_enum(False)),
-        ],
-        pydantic.Field(alias="maxVersion"),
+        Optional[OutputSyslogMaximumTLSVersion], pydantic.Field(alias="maxVersion")
     ] = None
 
 
-class OutputSyslogBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputSyslogBackpressureBehavior(str, Enum):
     r"""How to handle events when all receivers are exerting backpressure"""
 
     BLOCK = "block"
@@ -167,21 +156,21 @@ class OutputSyslogBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
     QUEUE = "queue"
 
 
-class OutputSyslogCompression(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputSyslogCompression(str, Enum):
     r"""Codec to use to compress the persisted data"""
 
     NONE = "none"
     GZIP = "gzip"
 
 
-class OutputSyslogQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputSyslogQueueFullBehavior(str, Enum):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
     BLOCK = "block"
     DROP = "drop"
 
 
-class OutputSyslogMode(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputSyslogMode(str, Enum):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
     ERROR = "error"
@@ -327,36 +316,25 @@ class OutputSyslog(BaseModel):
     streamtags: Optional[List[str]] = None
     r"""Tags for filtering and grouping in @{product}"""
 
-    protocol: Annotated[
-        Optional[OutputSyslogProtocol], PlainValidator(validate_open_enum(False))
-    ] = OutputSyslogProtocol.TCP
+    protocol: Optional[OutputSyslogProtocol] = OutputSyslogProtocol.TCP
     r"""The network protocol to use for sending out syslog messages"""
 
-    facility: Annotated[
-        Optional[Facility], PlainValidator(validate_open_enum(True))
-    ] = Facility.ONE
+    facility: Optional[Facility] = Facility.ONE
     r"""Default value for message facility. Will be overwritten by value of __facility if set. Defaults to user."""
 
-    severity: Annotated[
-        Optional[OutputSyslogSeverity], PlainValidator(validate_open_enum(True))
-    ] = OutputSyslogSeverity.FIVE
+    severity: Optional[OutputSyslogSeverity] = OutputSyslogSeverity.FIVE
     r"""Default value for message severity. Will be overwritten by value of __severity if set. Defaults to notice."""
 
     app_name: Annotated[Optional[str], pydantic.Field(alias="appName")] = "Cribl"
     r"""Default name for device or application that originated the message. Defaults to Cribl, but will be overwritten by value of __appname if set."""
 
     message_format: Annotated[
-        Annotated[
-            Optional[OutputSyslogMessageFormat],
-            PlainValidator(validate_open_enum(False)),
-        ],
-        pydantic.Field(alias="messageFormat"),
+        Optional[OutputSyslogMessageFormat], pydantic.Field(alias="messageFormat")
     ] = OutputSyslogMessageFormat.RFC3164
     r"""The syslog message format depending on the receiver's support"""
 
     timestamp_format: Annotated[
-        Annotated[Optional[TimestampFormat], PlainValidator(validate_open_enum(False))],
-        pydantic.Field(alias="timestampFormat"),
+        Optional[TimestampFormat], pydantic.Field(alias="timestampFormat")
     ] = TimestampFormat.SYSLOG
     r"""Timestamp format to use when serializing event's time field"""
 
@@ -395,10 +373,7 @@ class OutputSyslog(BaseModel):
     tls: Optional[OutputSyslogTLSSettingsClientSide] = None
 
     on_backpressure: Annotated[
-        Annotated[
-            Optional[OutputSyslogBackpressureBehavior],
-            PlainValidator(validate_open_enum(False)),
-        ],
+        Optional[OutputSyslogBackpressureBehavior],
         pydantic.Field(alias="onBackpressure"),
     ] = OutputSyslogBackpressureBehavior.BLOCK
     r"""How to handle events when all receivers are exerting backpressure"""
@@ -433,28 +408,19 @@ class OutputSyslog(BaseModel):
     r"""The location for the persistent queue files. To this field's value, the system will append: /<worker-id>/<output-id>."""
 
     pq_compress: Annotated[
-        Annotated[
-            Optional[OutputSyslogCompression], PlainValidator(validate_open_enum(False))
-        ],
-        pydantic.Field(alias="pqCompress"),
+        Optional[OutputSyslogCompression], pydantic.Field(alias="pqCompress")
     ] = OutputSyslogCompression.NONE
     r"""Codec to use to compress the persisted data"""
 
     pq_on_backpressure: Annotated[
-        Annotated[
-            Optional[OutputSyslogQueueFullBehavior],
-            PlainValidator(validate_open_enum(False)),
-        ],
+        Optional[OutputSyslogQueueFullBehavior],
         pydantic.Field(alias="pqOnBackpressure"),
     ] = OutputSyslogQueueFullBehavior.BLOCK
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
-    pq_mode: Annotated[
-        Annotated[
-            Optional[OutputSyslogMode], PlainValidator(validate_open_enum(False))
-        ],
-        pydantic.Field(alias="pqMode"),
-    ] = OutputSyslogMode.ERROR
+    pq_mode: Annotated[Optional[OutputSyslogMode], pydantic.Field(alias="pqMode")] = (
+        OutputSyslogMode.ERROR
+    )
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
     pq_controls: Annotated[

cribl_control_plane/models/outputtcpjson.py

@@ -1,12 +1,9 @@
 """Code generated by Speakeasy (https://speakeasy.com). DO NOT EDIT."""
 
 from __future__ import annotations
-from cribl_control_plane import utils
 from cribl_control_plane.types import BaseModel
-from cribl_control_plane.utils import validate_open_enum
 from enum import Enum
 import pydantic
-from pydantic.functional_validators import PlainValidator
 from typing import List, Optional
 from typing_extensions import Annotated, NotRequired, TypedDict
 
@@ -15,21 +12,21 @@ class OutputTcpjsonType(str, Enum):
     TCPJSON = "tcpjson"
 
 
-class OutputTcpjsonCompression(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputTcpjsonCompression(str, Enum):
     r"""Codec to use to compress the data before sending"""
 
     NONE = "none"
     GZIP = "gzip"
 
 
-class OutputTcpjsonMinimumTLSVersion(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputTcpjsonMinimumTLSVersion(str, Enum):
     TL_SV1 = "TLSv1"
     TL_SV1_1 = "TLSv1.1"
     TL_SV1_2 = "TLSv1.2"
     TL_SV1_3 = "TLSv1.3"
 
 
-class OutputTcpjsonMaximumTLSVersion(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputTcpjsonMaximumTLSVersion(str, Enum):
     TL_SV1 = "TLSv1"
     TL_SV1_1 = "TLSv1.1"
     TL_SV1_2 = "TLSv1.2"
@@ -89,23 +86,15 @@ class OutputTcpjsonTLSSettingsClientSide(BaseModel):
     r"""Passphrase to use to decrypt private key"""
 
     min_version: Annotated[
-        Annotated[
-            Optional[OutputTcpjsonMinimumTLSVersion],
-            PlainValidator(validate_open_enum(False)),
-        ],
-        pydantic.Field(alias="minVersion"),
+        Optional[OutputTcpjsonMinimumTLSVersion], pydantic.Field(alias="minVersion")
     ] = None
 
     max_version: Annotated[
-        Annotated[
-            Optional[OutputTcpjsonMaximumTLSVersion],
-            PlainValidator(validate_open_enum(False)),
-        ],
-        pydantic.Field(alias="maxVersion"),
+        Optional[OutputTcpjsonMaximumTLSVersion], pydantic.Field(alias="maxVersion")
     ] = None
 
 
-class OutputTcpjsonBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputTcpjsonBackpressureBehavior(str, Enum):
     r"""How to handle events when all receivers are exerting backpressure"""
 
     BLOCK = "block"
@@ -113,14 +102,14 @@ class OutputTcpjsonBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta)
     QUEUE = "queue"
 
 
-class OutputTcpjsonAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputTcpjsonAuthenticationMethod(str, Enum):
     r"""Select Manual to enter an auth token directly, or select Secret to use a text secret to authenticate"""
 
     MANUAL = "manual"
     SECRET = "secret"
 
 
-class OutputTcpjsonTLS(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputTcpjsonTLS(str, Enum):
     r"""Whether to inherit TLS configs from group setting or disable TLS"""
 
     INHERIT = "inherit"
@@ -147,9 +136,7 @@ class OutputTcpjsonHost(BaseModel):
     port: float
     r"""The port to connect to on the provided host"""
 
-    tls: Annotated[
-        Optional[OutputTcpjsonTLS], PlainValidator(validate_open_enum(False))
-    ] = OutputTcpjsonTLS.INHERIT
+    tls: Optional[OutputTcpjsonTLS] = OutputTcpjsonTLS.INHERIT
     r"""Whether to inherit TLS configs from group setting or disable TLS"""
 
     servername: Optional[str] = None
@@ -159,21 +146,21 @@ class OutputTcpjsonHost(BaseModel):
     r"""Assign a weight (>0) to each endpoint to indicate its traffic-handling capability"""
 
 
-class OutputTcpjsonPqCompressCompression(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputTcpjsonPqCompressCompression(str, Enum):
     r"""Codec to use to compress the persisted data"""
 
     NONE = "none"
     GZIP = "gzip"
 
 
-class OutputTcpjsonQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputTcpjsonQueueFullBehavior(str, Enum):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
     BLOCK = "block"
     DROP = "drop"
 
 
-class OutputTcpjsonMode(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputTcpjsonMode(str, Enum):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
     ERROR = "error"
@@ -281,9 +268,7 @@ class OutputTcpjson(BaseModel):
     )
     r"""Use load-balanced destinations"""
 
-    compression: Annotated[
-        Optional[OutputTcpjsonCompression], PlainValidator(validate_open_enum(False))
-    ] = OutputTcpjsonCompression.GZIP
+    compression: Optional[OutputTcpjsonCompression] = OutputTcpjsonCompression.GZIP
     r"""Codec to use to compress the data before sending"""
 
     log_failed_requests: Annotated[
@@ -317,20 +302,13 @@ class OutputTcpjson(BaseModel):
     r"""Upon connection, send a header-like record containing the auth token and other metadata.This record will not contain an actual event – only subsequent records will."""
 
     on_backpressure: Annotated[
-        Annotated[
-            Optional[OutputTcpjsonBackpressureBehavior],
-            PlainValidator(validate_open_enum(False)),
-        ],
+        Optional[OutputTcpjsonBackpressureBehavior],
         pydantic.Field(alias="onBackpressure"),
     ] = OutputTcpjsonBackpressureBehavior.BLOCK
     r"""How to handle events when all receivers are exerting backpressure"""
 
     auth_type: Annotated[
-        Annotated[
-            Optional[OutputTcpjsonAuthenticationMethod],
-            PlainValidator(validate_open_enum(False)),
-        ],
-        pydantic.Field(alias="authType"),
+        Optional[OutputTcpjsonAuthenticationMethod], pydantic.Field(alias="authType")
     ] = OutputTcpjsonAuthenticationMethod.MANUAL
     r"""Select Manual to enter an auth token directly, or select Secret to use a text secret to authenticate"""
 
@@ -377,29 +355,19 @@ class OutputTcpjson(BaseModel):
     r"""The location for the persistent queue files. To this field's value, the system will append: /<worker-id>/<output-id>."""
 
     pq_compress: Annotated[
-        Annotated[
-            Optional[OutputTcpjsonPqCompressCompression],
-            PlainValidator(validate_open_enum(False)),
-        ],
-        pydantic.Field(alias="pqCompress"),
+        Optional[OutputTcpjsonPqCompressCompression], pydantic.Field(alias="pqCompress")
     ] = OutputTcpjsonPqCompressCompression.NONE
     r"""Codec to use to compress the persisted data"""
 
     pq_on_backpressure: Annotated[
-        Annotated[
-            Optional[OutputTcpjsonQueueFullBehavior],
-            PlainValidator(validate_open_enum(False)),
-        ],
+        Optional[OutputTcpjsonQueueFullBehavior],
         pydantic.Field(alias="pqOnBackpressure"),
     ] = OutputTcpjsonQueueFullBehavior.BLOCK
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
-    pq_mode: Annotated[
-        Annotated[
-            Optional[OutputTcpjsonMode], PlainValidator(validate_open_enum(False))
-        ],
-        pydantic.Field(alias="pqMode"),
-    ] = OutputTcpjsonMode.ERROR
+    pq_mode: Annotated[Optional[OutputTcpjsonMode], pydantic.Field(alias="pqMode")] = (
+        OutputTcpjsonMode.ERROR
+    )
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
     pq_controls: Annotated[

cribl_control_plane/models/outputwavefront.py

@@ -1,12 +1,9 @@
 """Code generated by Speakeasy (https://speakeasy.com). DO NOT EDIT."""
 
 from __future__ import annotations
-from cribl_control_plane import utils
 from cribl_control_plane.types import BaseModel
-from cribl_control_plane.utils import validate_open_enum
 from enum import Enum
 import pydantic
-from pydantic.functional_validators import PlainValidator
 from typing import List, Optional
 from typing_extensions import Annotated, NotRequired, TypedDict
 
@@ -15,7 +12,7 @@ class OutputWavefrontType(str, Enum):
     WAVEFRONT = "wavefront"
 
 
-class OutputWavefrontAuthenticationMethod(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputWavefrontAuthenticationMethod(str, Enum):
     r"""Select Manual to enter an auth token directly, or select Secret to use a text secret to authenticate"""
 
     MANUAL = "manual"
@@ -33,7 +30,7 @@ class OutputWavefrontExtraHTTPHeader(BaseModel):
     name: Optional[str] = None
 
 
-class OutputWavefrontFailedRequestLoggingMode(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputWavefrontFailedRequestLoggingMode(str, Enum):
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
 
     PAYLOAD = "payload"
@@ -95,7 +92,7 @@ class OutputWavefrontTimeoutRetrySettings(BaseModel):
     r"""The maximum backoff interval, in milliseconds, Cribl Stream should apply. Default (and minimum) is 10,000 ms (10 seconds); maximum is 180,000 ms (180 seconds)."""
 
 
-class OutputWavefrontBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputWavefrontBackpressureBehavior(str, Enum):
     r"""How to handle events when all receivers are exerting backpressure"""
 
     BLOCK = "block"
@@ -103,21 +100,21 @@ class OutputWavefrontBackpressureBehavior(str, Enum, metaclass=utils.OpenEnumMet
     QUEUE = "queue"
 
 
-class OutputWavefrontCompression(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputWavefrontCompression(str, Enum):
     r"""Codec to use to compress the persisted data"""
 
     NONE = "none"
     GZIP = "gzip"
 
 
-class OutputWavefrontQueueFullBehavior(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputWavefrontQueueFullBehavior(str, Enum):
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
     BLOCK = "block"
     DROP = "drop"
 
 
-class OutputWavefrontMode(str, Enum, metaclass=utils.OpenEnumMeta):
+class OutputWavefrontMode(str, Enum):
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""
 
     ERROR = "error"
@@ -224,11 +221,7 @@ class OutputWavefront(BaseModel):
     r"""Tags for filtering and grouping in @{product}"""
 
     auth_type: Annotated[
-        Annotated[
-            Optional[OutputWavefrontAuthenticationMethod],
-            PlainValidator(validate_open_enum(False)),
-        ],
-        pydantic.Field(alias="authType"),
+        Optional[OutputWavefrontAuthenticationMethod], pydantic.Field(alias="authType")
     ] = OutputWavefrontAuthenticationMethod.MANUAL
     r"""Select Manual to enter an auth token directly, or select Secret to use a text secret to authenticate"""
 
@@ -279,10 +272,7 @@ class OutputWavefront(BaseModel):
     r"""Enable round-robin DNS lookup. When a DNS server returns multiple addresses, @{product} will cycle through them in the order returned. For optimal performance, consider enabling this setting for non-load balanced destinations."""
 
     failed_request_logging_mode: Annotated[
-        Annotated[
-            Optional[OutputWavefrontFailedRequestLoggingMode],
-            PlainValidator(validate_open_enum(False)),
-        ],
+        Optional[OutputWavefrontFailedRequestLoggingMode],
         pydantic.Field(alias="failedRequestLoggingMode"),
     ] = OutputWavefrontFailedRequestLoggingMode.NONE
     r"""Data to log when a request fails. All headers are redacted by default, unless listed as safe headers below."""
@@ -309,10 +299,7 @@ class OutputWavefront(BaseModel):
     r"""Honor any Retry-After header that specifies a delay (in seconds) no longer than 180 seconds after the retry request. @{product} limits the delay to 180 seconds, even if the Retry-After header specifies a longer delay. When enabled, takes precedence over user-configured retry options. When disabled, all Retry-After headers are ignored."""
 
     on_backpressure: Annotated[
-        Annotated[
-            Optional[OutputWavefrontBackpressureBehavior],
-            PlainValidator(validate_open_enum(False)),
-        ],
+        Optional[OutputWavefrontBackpressureBehavior],
         pydantic.Field(alias="onBackpressure"),
     ] = OutputWavefrontBackpressureBehavior.BLOCK
     r"""How to handle events when all receivers are exerting backpressure"""
@@ -339,28 +326,18 @@ class OutputWavefront(BaseModel):
     r"""The location for the persistent queue files. To this field's value, the system will append: /<worker-id>/<output-id>."""
 
     pq_compress: Annotated[
-        Annotated[
-            Optional[OutputWavefrontCompression],
-            PlainValidator(validate_open_enum(False)),
-        ],
-        pydantic.Field(alias="pqCompress"),
+        Optional[OutputWavefrontCompression], pydantic.Field(alias="pqCompress")
     ] = OutputWavefrontCompression.NONE
     r"""Codec to use to compress the persisted data"""
 
     pq_on_backpressure: Annotated[
-        Annotated[
-            Optional[OutputWavefrontQueueFullBehavior],
-            PlainValidator(validate_open_enum(False)),
-        ],
+        Optional[OutputWavefrontQueueFullBehavior],
         pydantic.Field(alias="pqOnBackpressure"),
     ] = OutputWavefrontQueueFullBehavior.BLOCK
     r"""How to handle events when the queue is exerting backpressure (full capacity or low disk). 'Block' is the same behavior as non-PQ blocking. 'Drop new data' throws away incoming data, while leaving the contents of the PQ unchanged."""
 
     pq_mode: Annotated[
-        Annotated[
-            Optional[OutputWavefrontMode], PlainValidator(validate_open_enum(False))
-        ],
-        pydantic.Field(alias="pqMode"),
+        Optional[OutputWavefrontMode], pydantic.Field(alias="pqMode")
     ] = OutputWavefrontMode.ERROR
     r"""In Error mode, PQ writes events to the filesystem if the Destination is unavailable. In Backpressure mode, PQ writes events to the filesystem when it detects backpressure from the Destination. In Always On mode, PQ always writes events to the filesystem."""