cloudshell-cli 5.0.2__py3-none-any.whl → 6.0.0__py3-none-any.whl

cloudshell/cli/session/_telnetlib.py

@@ -0,0 +1,654 @@
+# Vendored copy of CPython 3.12's telnetlib module (Lib/telnetlib.py),
+# taken from https://github.com/python/cpython/blob/3.12/Lib/telnetlib.py
+# telnetlib was removed from the standard library in Python 3.13 (PEP 594);
+# this copy keeps TelnetSession working on Python >= 3.13. On Python <= 3.12
+# the stdlib module is still preferred (see telnet_session.py).
+# License: Python Software Foundation License Version 2 (PSF-2.0).
+# The command-line test() scaffolding from the original module was removed.
+r"""TELNET client class.
+
+Based on RFC 854: TELNET Protocol Specification, by J. Postel and
+J. Reynolds
+
+Example:
+
+>>> from telnetlib import Telnet
+>>> tn = Telnet('www.python.org', 79)   # connect to finger port
+>>> tn.write(b'guido\r\n')
+>>> print(tn.read_all())
+Login       Name               TTY         Idle    When    Where
+guido    Guido van Rossum      pts/2        <Dec  2 11:10> snag.cnri.reston..
+
+>>>
+
+Note that read_all() won't read until eof -- it just reads some data
+-- but it guarantees to read at least one byte unless EOF is hit.
+
+It is possible to pass a Telnet object to a selector in order to wait until
+more data is available.  Note that in this case, read_eager() may return b''
+even if there was data on the socket, because the protocol negotiation may have
+eaten the data.  This is why EOFError is needed in some cases to distinguish
+between "no data" and "connection closed" (since the socket also appears ready
+for reading when it is closed).
+
+To do:
+- option negotiation
+- timeout should be intrinsic to the connection object instead of an
+  option on one of the read calls only
+
+"""
+
+
+# Imported modules
+import sys
+import socket
+import selectors
+from time import monotonic as _time
+
+
+__all__ = ["Telnet"]
+
+# Tunable parameters
+DEBUGLEVEL = 0
+
+# Telnet protocol defaults
+TELNET_PORT = 23
+
+# Telnet protocol characters (don't change)
+IAC  = bytes([255]) # "Interpret As Command"
+DONT = bytes([254])
+DO   = bytes([253])
+WONT = bytes([252])
+WILL = bytes([251])
+theNULL = bytes([0])
+
+SE  = bytes([240])  # Subnegotiation End
+NOP = bytes([241])  # No Operation
+DM  = bytes([242])  # Data Mark
+BRK = bytes([243])  # Break
+IP  = bytes([244])  # Interrupt process
+AO  = bytes([245])  # Abort output
+AYT = bytes([246])  # Are You There
+EC  = bytes([247])  # Erase Character
+EL  = bytes([248])  # Erase Line
+GA  = bytes([249])  # Go Ahead
+SB =  bytes([250])  # Subnegotiation Begin
+
+
+# Telnet protocol options code (don't change)
+# These ones all come from arpa/telnet.h
+BINARY = bytes([0]) # 8-bit data path
+ECHO = bytes([1]) # echo
+RCP = bytes([2]) # prepare to reconnect
+SGA = bytes([3]) # suppress go ahead
+NAMS = bytes([4]) # approximate message size
+STATUS = bytes([5]) # give status
+TM = bytes([6]) # timing mark
+RCTE = bytes([7]) # remote controlled transmission and echo
+NAOL = bytes([8]) # negotiate about output line width
+NAOP = bytes([9]) # negotiate about output page size
+NAOCRD = bytes([10]) # negotiate about CR disposition
+NAOHTS = bytes([11]) # negotiate about horizontal tabstops
+NAOHTD = bytes([12]) # negotiate about horizontal tab disposition
+NAOFFD = bytes([13]) # negotiate about formfeed disposition
+NAOVTS = bytes([14]) # negotiate about vertical tab stops
+NAOVTD = bytes([15]) # negotiate about vertical tab disposition
+NAOLFD = bytes([16]) # negotiate about output LF disposition
+XASCII = bytes([17]) # extended ascii character set
+LOGOUT = bytes([18]) # force logout
+BM = bytes([19]) # byte macro
+DET = bytes([20]) # data entry terminal
+SUPDUP = bytes([21]) # supdup protocol
+SUPDUPOUTPUT = bytes([22]) # supdup output
+SNDLOC = bytes([23]) # send location
+TTYPE = bytes([24]) # terminal type
+EOR = bytes([25]) # end or record
+TUID = bytes([26]) # TACACS user identification
+OUTMRK = bytes([27]) # output marking
+TTYLOC = bytes([28]) # terminal location number
+VT3270REGIME = bytes([29]) # 3270 regime
+X3PAD = bytes([30]) # X.3 PAD
+NAWS = bytes([31]) # window size
+TSPEED = bytes([32]) # terminal speed
+LFLOW = bytes([33]) # remote flow control
+LINEMODE = bytes([34]) # Linemode option
+XDISPLOC = bytes([35]) # X Display Location
+OLD_ENVIRON = bytes([36]) # Old - Environment variables
+AUTHENTICATION = bytes([37]) # Authenticate
+ENCRYPT = bytes([38]) # Encryption option
+NEW_ENVIRON = bytes([39]) # New - Environment variables
+# the following ones come from
+# http://www.iana.org/assignments/telnet-options
+# Unfortunately, that document does not assign identifiers
+# to all of them, so we are making them up
+TN3270E = bytes([40]) # TN3270E
+XAUTH = bytes([41]) # XAUTH
+CHARSET = bytes([42]) # CHARSET
+RSP = bytes([43]) # Telnet Remote Serial Port
+COM_PORT_OPTION = bytes([44]) # Com Port Control Option
+SUPPRESS_LOCAL_ECHO = bytes([45]) # Telnet Suppress Local Echo
+TLS = bytes([46]) # Telnet Start TLS
+KERMIT = bytes([47]) # KERMIT
+SEND_URL = bytes([48]) # SEND-URL
+FORWARD_X = bytes([49]) # FORWARD_X
+PRAGMA_LOGON = bytes([138]) # TELOPT PRAGMA LOGON
+SSPI_LOGON = bytes([139]) # TELOPT SSPI LOGON
+PRAGMA_HEARTBEAT = bytes([140]) # TELOPT PRAGMA HEARTBEAT
+EXOPL = bytes([255]) # Extended-Options-List
+NOOPT = bytes([0])
+
+
+# poll/select have the advantage of not requiring any extra file descriptor,
+# contrarily to epoll/kqueue (also, they require a single syscall).
+if hasattr(selectors, 'PollSelector'):
+    _TelnetSelector = selectors.PollSelector
+else:
+    _TelnetSelector = selectors.SelectSelector
+
+
+class Telnet:
+
+    """Telnet interface class.
+
+    An instance of this class represents a connection to a telnet
+    server.  The instance is initially not connected; the open()
+    method must be used to establish a connection.  Alternatively, the
+    host name and optional port number can be passed to the
+    constructor, too.
+
+    Don't try to reopen an already connected instance.
+
+    This class has many read_*() methods.  Note that some of them
+    raise EOFError when the end of the connection is read, because
+    they can return an empty string for other reasons.  See the
+    individual doc strings.
+
+    read_until(expected, [timeout])
+        Read until the expected string has been seen, or a timeout is
+        hit (default is no timeout); may block.
+
+    read_all()
+        Read all data until EOF; may block.
+
+    read_some()
+        Read at least one byte or EOF; may block.
+
+    read_very_eager()
+        Read all data available already queued or on the socket,
+        without blocking.
+
+    read_eager()
+        Read either data already queued or some data available on the
+        socket, without blocking.
+
+    read_lazy()
+        Read all data in the raw queue (processing it first), without
+        doing any socket I/O.
+
+    read_very_lazy()
+        Reads all data in the cooked queue, without doing any socket
+        I/O.
+
+    read_sb_data()
+        Reads available data between SB ... SE sequence. Don't block.
+
+    set_option_negotiation_callback(callback)
+        Each time a telnet option is read on the input flow, this callback
+        (if set) is called with the following parameters :
+        callback(telnet socket, command, option)
+            option will be chr(0) when there is no option.
+        No other action is done afterwards by telnetlib.
+
+    """
+    sock = None  # for __del__()
+
+    def __init__(self, host=None, port=0,
+                 timeout=socket._GLOBAL_DEFAULT_TIMEOUT):
+        """Constructor.
+
+        When called without arguments, create an unconnected instance.
+        With a hostname argument, it connects the instance; port number
+        and timeout are optional.
+        """
+        self.debuglevel = DEBUGLEVEL
+        self.host = host
+        self.port = port
+        self.timeout = timeout
+        self.sock = None
+        self.rawq = b''
+        self.irawq = 0
+        self.cookedq = b''
+        self.eof = 0
+        self.iacseq = b'' # Buffer for IAC sequence.
+        self.sb = 0 # flag for SB and SE sequence.
+        self.sbdataq = b''
+        self.option_callback = None
+        if host is not None:
+            self.open(host, port, timeout)
+
+    def open(self, host, port=0, timeout=socket._GLOBAL_DEFAULT_TIMEOUT):
+        """Connect to a host.
+
+        The optional second argument is the port number, which
+        defaults to the standard telnet port (23).
+
+        Don't try to reopen an already connected instance.
+        """
+        self.eof = 0
+        if not port:
+            port = TELNET_PORT
+        self.host = host
+        self.port = port
+        self.timeout = timeout
+        sys.audit("telnetlib.Telnet.open", self, host, port)
+        self.sock = socket.create_connection((host, port), timeout)
+
+    def __del__(self):
+        """Destructor -- close the connection."""
+        self.close()
+
+    def msg(self, msg, *args):
+        """Print a debug message, when the debug level is > 0.
+
+        If extra arguments are present, they are substituted in the
+        message using the standard string formatting operator.
+
+        """
+        if self.debuglevel > 0:
+            print('Telnet(%s,%s):' % (self.host, self.port), end=' ')
+            if args:
+                print(msg % args)
+            else:
+                print(msg)
+
+    def set_debuglevel(self, debuglevel):
+        """Set the debug level.
+
+        The higher it is, the more debug output you get (on sys.stdout).
+
+        """
+        self.debuglevel = debuglevel
+
+    def close(self):
+        """Close the connection."""
+        sock = self.sock
+        self.sock = None
+        self.eof = True
+        self.iacseq = b''
+        self.sb = 0
+        if sock:
+            sock.close()
+
+    def get_socket(self):
+        """Return the socket object used internally."""
+        return self.sock
+
+    def fileno(self):
+        """Return the fileno() of the socket object used internally."""
+        return self.sock.fileno()
+
+    def write(self, buffer):
+        """Write a string to the socket, doubling any IAC characters.
+
+        Can block if the connection is blocked.  May raise
+        OSError if the connection is closed.
+
+        """
+        if IAC in buffer:
+            buffer = buffer.replace(IAC, IAC+IAC)
+        sys.audit("telnetlib.Telnet.write", self, buffer)
+        self.msg("send %r", buffer)
+        self.sock.sendall(buffer)
+
+    def read_until(self, match, timeout=None):
+        """Read until a given string is encountered or until timeout.
+
+        When no match is found, return whatever is available instead,
+        possibly the empty string.  Raise EOFError if the connection
+        is closed and no cooked data is available.
+
+        """
+        n = len(match)
+        self.process_rawq()
+        i = self.cookedq.find(match)
+        if i >= 0:
+            i = i+n
+            buf = self.cookedq[:i]
+            self.cookedq = self.cookedq[i:]
+            return buf
+        if timeout is not None:
+            deadline = _time() + timeout
+        with _TelnetSelector() as selector:
+            selector.register(self, selectors.EVENT_READ)
+            while not self.eof:
+                if selector.select(timeout):
+                    i = max(0, len(self.cookedq)-n)
+                    self.fill_rawq()
+                    self.process_rawq()
+                    i = self.cookedq.find(match, i)
+                    if i >= 0:
+                        i = i+n
+                        buf = self.cookedq[:i]
+                        self.cookedq = self.cookedq[i:]
+                        return buf
+                if timeout is not None:
+                    timeout = deadline - _time()
+                    if timeout < 0:
+                        break
+        return self.read_very_lazy()
+
+    def read_all(self):
+        """Read all data until EOF; block until connection closed."""
+        self.process_rawq()
+        while not self.eof:
+            self.fill_rawq()
+            self.process_rawq()
+        buf = self.cookedq
+        self.cookedq = b''
+        return buf
+
+    def read_some(self):
+        """Read at least one byte of cooked data unless EOF is hit.
+
+        Return b'' if EOF is hit.  Block if no data is immediately
+        available.
+
+        """
+        self.process_rawq()
+        while not self.cookedq and not self.eof:
+            self.fill_rawq()
+            self.process_rawq()
+        buf = self.cookedq
+        self.cookedq = b''
+        return buf
+
+    def read_very_eager(self):
+        """Read everything that's possible without blocking in I/O (eager).
+
+        Raise EOFError if connection closed and no cooked data
+        available.  Return b'' if no cooked data available otherwise.
+        Don't block unless in the midst of an IAC sequence.
+
+        """
+        self.process_rawq()
+        while not self.eof and self.sock_avail():
+            self.fill_rawq()
+            self.process_rawq()
+        return self.read_very_lazy()
+
+    def read_eager(self):
+        """Read readily available data.
+
+        Raise EOFError if connection closed and no cooked data
+        available.  Return b'' if no cooked data available otherwise.
+        Don't block unless in the midst of an IAC sequence.
+
+        """
+        self.process_rawq()
+        while not self.cookedq and not self.eof and self.sock_avail():
+            self.fill_rawq()
+            self.process_rawq()
+        return self.read_very_lazy()
+
+    def read_lazy(self):
+        """Process and return data that's already in the queues (lazy).
+
+        Raise EOFError if connection closed and no data available.
+        Return b'' if no cooked data available otherwise.  Don't block
+        unless in the midst of an IAC sequence.
+
+        """
+        self.process_rawq()
+        return self.read_very_lazy()
+
+    def read_very_lazy(self):
+        """Return any data available in the cooked queue (very lazy).
+
+        Raise EOFError if connection closed and no data available.
+        Return b'' if no cooked data available otherwise.  Don't block.
+
+        """
+        buf = self.cookedq
+        self.cookedq = b''
+        if not buf and self.eof and not self.rawq:
+            raise EOFError('telnet connection closed')
+        return buf
+
+    def read_sb_data(self):
+        """Return any data available in the SB ... SE queue.
+
+        Return b'' if no SB ... SE available. Should only be called
+        after seeing a SB or SE command. When a new SB command is
+        found, old unread SB data will be discarded. Don't block.
+
+        """
+        buf = self.sbdataq
+        self.sbdataq = b''
+        return buf
+
+    def set_option_negotiation_callback(self, callback):
+        """Provide a callback function called after each receipt of a telnet option."""
+        self.option_callback = callback
+
+    def process_rawq(self):
+        """Transfer from raw queue to cooked queue.
+
+        Set self.eof when connection is closed.  Don't block unless in
+        the midst of an IAC sequence.
+
+        """
+        buf = [b'', b'']
+        try:
+            while self.rawq:
+                c = self.rawq_getchar()
+                if not self.iacseq:
+                    if c == theNULL:
+                        continue
+                    if c == b"\021":
+                        continue
+                    if c != IAC:
+                        buf[self.sb] = buf[self.sb] + c
+                        continue
+                    else:
+                        self.iacseq += c
+                elif len(self.iacseq) == 1:
+                    # 'IAC: IAC CMD [OPTION only for WILL/WONT/DO/DONT]'
+                    if c in (DO, DONT, WILL, WONT):
+                        self.iacseq += c
+                        continue
+
+                    self.iacseq = b''
+                    if c == IAC:
+                        buf[self.sb] = buf[self.sb] + c
+                    else:
+                        if c == SB: # SB ... SE start.
+                            self.sb = 1
+                            self.sbdataq = b''
+                        elif c == SE:
+                            self.sb = 0
+                            self.sbdataq = self.sbdataq + buf[1]
+                            buf[1] = b''
+                        if self.option_callback:
+                            # Callback is supposed to look into
+                            # the sbdataq
+                            self.option_callback(self.sock, c, NOOPT)
+                        else:
+                            # We can't offer automatic processing of
+                            # suboptions. Alas, we should not get any
+                            # unless we did a WILL/DO before.
+                            self.msg('IAC %d not recognized' % ord(c))
+                elif len(self.iacseq) == 2:
+                    cmd = self.iacseq[1:2]
+                    self.iacseq = b''
+                    opt = c
+                    if cmd in (DO, DONT):
+                        self.msg('IAC %s %d',
+                            cmd == DO and 'DO' or 'DONT', ord(opt))
+                        if self.option_callback:
+                            self.option_callback(self.sock, cmd, opt)
+                        else:
+                            self.sock.sendall(IAC + WONT + opt)
+                    elif cmd in (WILL, WONT):
+                        self.msg('IAC %s %d',
+                            cmd == WILL and 'WILL' or 'WONT', ord(opt))
+                        if self.option_callback:
+                            self.option_callback(self.sock, cmd, opt)
+                        else:
+                            self.sock.sendall(IAC + DONT + opt)
+        except EOFError: # raised by self.rawq_getchar()
+            self.iacseq = b'' # Reset on EOF
+            self.sb = 0
+        self.cookedq = self.cookedq + buf[0]
+        self.sbdataq = self.sbdataq + buf[1]
+
+    def rawq_getchar(self):
+        """Get next char from raw queue.
+
+        Block if no data is immediately available.  Raise EOFError
+        when connection is closed.
+
+        """
+        if not self.rawq:
+            self.fill_rawq()
+            if self.eof:
+                raise EOFError
+        c = self.rawq[self.irawq:self.irawq+1]
+        self.irawq = self.irawq + 1
+        if self.irawq >= len(self.rawq):
+            self.rawq = b''
+            self.irawq = 0
+        return c
+
+    def fill_rawq(self):
+        """Fill raw queue from exactly one recv() system call.
+
+        Block if no data is immediately available.  Set self.eof when
+        connection is closed.
+
+        """
+        if self.irawq >= len(self.rawq):
+            self.rawq = b''
+            self.irawq = 0
+        # The buffer size should be fairly small so as to avoid quadratic
+        # behavior in process_rawq() above
+        buf = self.sock.recv(50)
+        self.msg("recv %r", buf)
+        self.eof = (not buf)
+        self.rawq = self.rawq + buf
+
+    def sock_avail(self):
+        """Test whether data is available on the socket."""
+        with _TelnetSelector() as selector:
+            selector.register(self, selectors.EVENT_READ)
+            return bool(selector.select(0))
+
+    def interact(self):
+        """Interaction function, emulates a very dumb telnet client."""
+        if sys.platform == "win32":
+            self.mt_interact()
+            return
+        with _TelnetSelector() as selector:
+            selector.register(self, selectors.EVENT_READ)
+            selector.register(sys.stdin, selectors.EVENT_READ)
+
+            while True:
+                for key, events in selector.select():
+                    if key.fileobj is self:
+                        try:
+                            text = self.read_eager()
+                        except EOFError:
+                            print('*** Connection closed by remote host ***')
+                            return
+                        if text:
+                            sys.stdout.write(text.decode('ascii'))
+                            sys.stdout.flush()
+                    elif key.fileobj is sys.stdin:
+                        line = sys.stdin.readline().encode('ascii')
+                        if not line:
+                            return
+                        self.write(line)
+
+    def mt_interact(self):
+        """Multithreaded version of interact()."""
+        import _thread
+        _thread.start_new_thread(self.listener, ())
+        while 1:
+            line = sys.stdin.readline()
+            if not line:
+                break
+            self.write(line.encode('ascii'))
+
+    def listener(self):
+        """Helper for mt_interact() -- this executes in the other thread."""
+        while 1:
+            try:
+                data = self.read_eager()
+            except EOFError:
+                print('*** Connection closed by remote host ***')
+                return
+            if data:
+                sys.stdout.write(data.decode('ascii'))
+            else:
+                sys.stdout.flush()
+
+    def expect(self, list, timeout=None):
+        """Read until one from a list of a regular expressions matches.
+
+        The first argument is a list of regular expressions, either
+        compiled (re.Pattern instances) or uncompiled (strings).
+        The optional second argument is a timeout, in seconds; default
+        is no timeout.
+
+        Return a tuple of three items: the index in the list of the
+        first regular expression that matches; the re.Match object
+        returned; and the text read up till and including the match.
+
+        If EOF is read and no text was read, raise EOFError.
+        Otherwise, when nothing matches, return (-1, None, text) where
+        text is the text received so far (may be the empty string if a
+        timeout happened).
+
+        If a regular expression ends with a greedy match (e.g. '.*')
+        or if more than one expression can match the same input, the
+        results are undeterministic, and may depend on the I/O timing.
+
+        """
+        re = None
+        list = list[:]
+        indices = range(len(list))
+        for i in indices:
+            if not hasattr(list[i], "search"):
+                if not re: import re
+                list[i] = re.compile(list[i])
+        if timeout is not None:
+            deadline = _time() + timeout
+        with _TelnetSelector() as selector:
+            selector.register(self, selectors.EVENT_READ)
+            while not self.eof:
+                self.process_rawq()
+                for i in indices:
+                    m = list[i].search(self.cookedq)
+                    if m:
+                        e = m.end()
+                        text = self.cookedq[:e]
+                        self.cookedq = self.cookedq[e:]
+                        return (i, m, text)
+                if timeout is not None:
+                    ready = selector.select(timeout)
+                    timeout = deadline - _time()
+                    if not ready:
+                        if timeout < 0:
+                            break
+                        else:
+                            continue
+                self.fill_rawq()
+        text = self.read_very_lazy()
+        if not text and self.eof:
+            raise EOFError
+        return (-1, None, text)
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, type, value, traceback):
+        self.close()

cloudshell/cli/session/telnet_session.py

@@ -1,8 +1,13 @@
 from __future__ import annotations
 
-import telnetlib
 from typing import TYPE_CHECKING
 
+try:
+    # telnetlib was removed from the stdlib in Python 3.13 (PEP 594)
+    import telnetlib
+except ImportError:
+    from cloudshell.cli.session import _telnetlib as telnetlib
+
 from cloudshell.cli.session.connection_params import ConnectionParams
 from cloudshell.cli.session.expect_session import ExpectSession
 from cloudshell.cli.session.session_exceptions import SessionException

cloudshell_cli-6.0.0.dist-info/METADATA

@@ -0,0 +1,30 @@
+Metadata-Version: 2.4
+Name: cloudshell-cli
+Version: 6.0.0
+Summary: QualiSystems CloudShell CLI support package
+Home-page: https://www.quali.com/
+Author: QualiSystems
+Author-email: info@qualisystems.com
+Classifier: Programming Language :: Python :: 3
+Classifier: Programming Language :: Python :: 3.9
+Classifier: Programming Language :: Python :: 3.10
+Classifier: Programming Language :: Python :: 3.11
+Classifier: Programming Language :: Python :: 3.12
+Classifier: Programming Language :: Python :: 3.13
+Requires-Python: >=3.9
+License-File: LICENSE
+Requires-Dist: paramiko<4,>=3.4
+Requires-Dist: scp~=0.14
+Requires-Dist: typing-extensions>=4.0
+Requires-Dist: attrs>=21
+Dynamic: author
+Dynamic: author-email
+Dynamic: classifier
+Dynamic: description
+Dynamic: home-page
+Dynamic: license-file
+Dynamic: requires-dist
+Dynamic: requires-python
+Dynamic: summary
+
+QualiSystems CloudShell CLI support package

{cloudshell_cli-5.0.2.dist-info → cloudshell_cli-6.0.0.dist-info}/RECORD

@@ -23,6 +23,7 @@ cloudshell/cli/service/session_pool.py,sha256=9LFS02H4rQAmy0UMch8MCpNtmWAP2J6Pm_
 cloudshell/cli/service/session_pool_context_manager.py,sha256=8APCyjW4RQIBmTVW1FkgNBzH4-Yupj_C9-LS2aD6DnY,2365
 cloudshell/cli/service/session_pool_manager.py,sha256=9vQglOkNTdj9e4wXvD7Pt6aICI-F1SAS8zRkkkl0yUI,3989
 cloudshell/cli/session/__init__.py,sha256=qEFeq3yuf3lQKVseALmL8aPM8fpCS54B_5pry00M3hk,76
+cloudshell/cli/session/_telnetlib.py,sha256=FjS19Qalh2FIpUR_4fF2TA25XZbgPaDzfugVzcrQkHw,23058
 cloudshell/cli/session/connection_params.py,sha256=hNKBzqsaGh6wjpzN_AnqzhW5NtQ99M3ydXgv3L38PfI,1282
 cloudshell/cli/session/console_ssh.py,sha256=-X66mF6TPuIGeq-AXxznr34TelBveq-Ao53ORt_Lp_8,442
 cloudshell/cli/session/console_telnet.py,sha256=J2kv8VQOtxmWuA54M-NjgYrvG1GaI1-h6IFimjIID7I,1312
@@ -32,10 +33,11 @@ cloudshell/cli/session/session.py,sha256=c_h9xVnjUMtxTPUBSFIzFEI8WNkOutKoFrtc4yg
 cloudshell/cli/session/session_exceptions.py,sha256=b6xHCJlQ7zXrESbG6DJvFQ8q_JE_OAZHZ2rHya9M62g,430
 cloudshell/cli/session/ssh_session.py,sha256=QyKZei2ea3J9u6_0q0pgMckDkxZ5gjY9Ngcf2DijhJk,4798
 cloudshell/cli/session/tcp_session.py,sha256=1ZptNrBXI43VaN7bDdZV8nIN-MKxkptZoLCWHJejDpU,1906
-cloudshell/cli/session/telnet_session.py,sha256=P3lakg3BdJNqHV047YbwCKoyy4s7J1RcgV07__518Bg,3167
+cloudshell/cli/session/telnet_session.py,sha256=g4_aYY401ovd6zKvRKbVLup_dEntojhGel2CKA_L760,3329
 cloudshell/cli/session/tl1_session.py,sha256=g18umL3TSnAT_O5oArTSVWRvU_vUghQMgArPPL7d0jY,3730
 cloudshell/cli/session/helper/__init__.py,sha256=qEFeq3yuf3lQKVseALmL8aPM8fpCS54B_5pry00M3hk,76
 cloudshell/cli/session/helper/normalize_buffer.py,sha256=cHk4GDLFweb-0aAhn_U1Z5mUCu6PmbWsjemalKySH1g,726
+cloudshell_cli-6.0.0.dist-info/licenses/LICENSE,sha256=xllut76FgcGL5zbIRvuRc7aezPbvlMUTWJPsVr2Sugg,11358
 tests/__init__.py,sha256=qEFeq3yuf3lQKVseALmL8aPM8fpCS54B_5pry00M3hk,76
 tests/conftest.py,sha256=C-ER3kFsadc5iS4uWEPYRbEVcLxByCZOMdx1HIDNimE,103
 tests/cli/__init__.py,sha256=qEFeq3yuf3lQKVseALmL8aPM8fpCS54B_5pry00M3hk,76
@@ -55,8 +57,7 @@ tests/cli/session/test_expect_session.py,sha256=-RnEw0po6daSEx24tb8-ciBO5prZffpK
 tests/cli/session/test_expect_session_py3.py,sha256=Mf2Mn06oowrpnvhMM4Y_xtNc4r9Xg0E3AXfSwu6RfaU,395
 tests/cli/session/test_ssh_session.py,sha256=ek35BujWEPZE4QKuHbapFyY7k2unsJWrlBHI1CCc-FA,21646
 tests/cli/session/test_telnet_session.py,sha256=GnT_2Otd_u_c319bk4bGaDLtvmBzUMWLgHuNMY1wqnE,3739
-cloudshell_cli-5.0.2.dist-info/LICENSE,sha256=xllut76FgcGL5zbIRvuRc7aezPbvlMUTWJPsVr2Sugg,11358
-cloudshell_cli-5.0.2.dist-info/METADATA,sha256=zCmoKtqg9Vb1vm7PQ0v_Bu-NX1TF4Her8InPQ3FDcB4,414
-cloudshell_cli-5.0.2.dist-info/WHEEL,sha256=Xo9-1PvkuimrydujYJAjF7pCkriuXBpUPEjma1nZyJ0,92
-cloudshell_cli-5.0.2.dist-info/top_level.txt,sha256=L6C4-nnYVKqlsqCQ3HQ98myc8tI977N4Jxb-DHJSECc,17
-cloudshell_cli-5.0.2.dist-info/RECORD,,
+cloudshell_cli-6.0.0.dist-info/METADATA,sha256=es7yFXfjXUTbTOBtAyhR9sjWbHv1ZxWkoMhrRGIanyE,899
+cloudshell_cli-6.0.0.dist-info/WHEEL,sha256=aeYiig01lYGDzBgS8HxWXOg3uV61G9ijOsup-k9o1sk,91
+cloudshell_cli-6.0.0.dist-info/top_level.txt,sha256=L6C4-nnYVKqlsqCQ3HQ98myc8tI977N4Jxb-DHJSECc,17
+cloudshell_cli-6.0.0.dist-info/RECORD,,

{cloudshell_cli-5.0.2.dist-info → cloudshell_cli-6.0.0.dist-info}/WHEEL

@@ -1,5 +1,5 @@
 Wheel-Version: 1.0
-Generator: bdist_wheel (0.41.3)
+Generator: setuptools (82.0.1)
 Root-Is-Purelib: true
 Tag: py3-none-any
 

cloudshell_cli-5.0.2.dist-info/METADATA

@@ -1,15 +0,0 @@
-Metadata-Version: 2.1
-Name: cloudshell-cli
-Version: 5.0.2
-Summary: QualiSystems CloudShell CLI support package
-Home-page: https://www.quali.com/
-Author: QualiSystems
-Author-email: info@qualisystems.com
-Requires-Python: ~=3.7
-License-File: LICENSE
-Requires-Dist: paramiko ~=2.12
-Requires-Dist: scp ~=0.14
-Requires-Dist: typing-extensions >=4.0
-Requires-Dist: attrs >=21
-
-QualiSystems CloudShell CLI support package