catocli 1.0.2__py3-none-any.whl → 1.0.3__py3-none-any.whl

build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/vendor/urllib3/util/url.py

@@ -1,471 +0,0 @@
-from __future__ import annotations
-
-import re
-import typing
-
-from ..exceptions import LocationParseError
-from .util import to_str
-
-# We only want to normalize urls with an HTTP(S) scheme.
-# urllib3 infers URLs without a scheme (None) to be http.
-_NORMALIZABLE_SCHEMES = ("http", "https", None)
-
-# Almost all of these patterns were derived from the
-# 'rfc3986' module: https://github.com/python-hyper/rfc3986
-_PERCENT_RE = re.compile(r"%[a-fA-F0-9]{2}")
-_SCHEME_RE = re.compile(r"^(?:[a-zA-Z][a-zA-Z0-9+-]*:|/)")
-_URI_RE = re.compile(
-    r"^(?:([a-zA-Z][a-zA-Z0-9+.-]*):)?"
-    r"(?://([^\\/?#]*))?"
-    r"([^?#]*)"
-    r"(?:\?([^#]*))?"
-    r"(?:#(.*))?$",
-    re.UNICODE | re.DOTALL,
-)
-
-_IPV4_PAT = r"(?:[0-9]{1,3}\.){3}[0-9]{1,3}"
-_HEX_PAT = "[0-9A-Fa-f]{1,4}"
-_LS32_PAT = "(?:{hex}:{hex}|{ipv4})".format(hex=_HEX_PAT, ipv4=_IPV4_PAT)
-_subs = {"hex": _HEX_PAT, "ls32": _LS32_PAT}
-_variations = [
-    #                            6( h16 ":" ) ls32
-    "(?:%(hex)s:){6}%(ls32)s",
-    #                       "::" 5( h16 ":" ) ls32
-    "::(?:%(hex)s:){5}%(ls32)s",
-    # [               h16 ] "::" 4( h16 ":" ) ls32
-    "(?:%(hex)s)?::(?:%(hex)s:){4}%(ls32)s",
-    # [ *1( h16 ":" ) h16 ] "::" 3( h16 ":" ) ls32
-    "(?:(?:%(hex)s:)?%(hex)s)?::(?:%(hex)s:){3}%(ls32)s",
-    # [ *2( h16 ":" ) h16 ] "::" 2( h16 ":" ) ls32
-    "(?:(?:%(hex)s:){0,2}%(hex)s)?::(?:%(hex)s:){2}%(ls32)s",
-    # [ *3( h16 ":" ) h16 ] "::"    h16 ":"   ls32
-    "(?:(?:%(hex)s:){0,3}%(hex)s)?::%(hex)s:%(ls32)s",
-    # [ *4( h16 ":" ) h16 ] "::"              ls32
-    "(?:(?:%(hex)s:){0,4}%(hex)s)?::%(ls32)s",
-    # [ *5( h16 ":" ) h16 ] "::"              h16
-    "(?:(?:%(hex)s:){0,5}%(hex)s)?::%(hex)s",
-    # [ *6( h16 ":" ) h16 ] "::"
-    "(?:(?:%(hex)s:){0,6}%(hex)s)?::",
-]
-
-_UNRESERVED_PAT = r"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789._\-~"
-_IPV6_PAT = "(?:" + "|".join([x % _subs for x in _variations]) + ")"
-_ZONE_ID_PAT = "(?:%25|%)(?:[" + _UNRESERVED_PAT + "]|%[a-fA-F0-9]{2})+"
-_IPV6_ADDRZ_PAT = r"\[" + _IPV6_PAT + r"(?:" + _ZONE_ID_PAT + r")?\]"
-_REG_NAME_PAT = r"(?:[^\[\]%:/?#]|%[a-fA-F0-9]{2})*"
-_TARGET_RE = re.compile(r"^(/[^?#]*)(?:\?([^#]*))?(?:#.*)?$")
-
-_IPV4_RE = re.compile("^" + _IPV4_PAT + "$")
-_IPV6_RE = re.compile("^" + _IPV6_PAT + "$")
-_IPV6_ADDRZ_RE = re.compile("^" + _IPV6_ADDRZ_PAT + "$")
-_BRACELESS_IPV6_ADDRZ_RE = re.compile("^" + _IPV6_ADDRZ_PAT[2:-2] + "$")
-_ZONE_ID_RE = re.compile("(" + _ZONE_ID_PAT + r")\]$")
-
-_HOST_PORT_PAT = ("^(%s|%s|%s)(?::0*?(|0|[1-9][0-9]{0,4}))?$") % (
-    _REG_NAME_PAT,
-    _IPV4_PAT,
-    _IPV6_ADDRZ_PAT,
-)
-_HOST_PORT_RE = re.compile(_HOST_PORT_PAT, re.UNICODE | re.DOTALL)
-
-_UNRESERVED_CHARS = set(
-    "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789._-~"
-)
-_SUB_DELIM_CHARS = set("!$&'()*+,;=")
-_USERINFO_CHARS = _UNRESERVED_CHARS | _SUB_DELIM_CHARS | {":"}
-_PATH_CHARS = _USERINFO_CHARS | {"@", "/"}
-_QUERY_CHARS = _FRAGMENT_CHARS = _PATH_CHARS | {"?"}
-
-
-class Url(
-    typing.NamedTuple(
-        "Url",
-        [
-            ("scheme", typing.Optional[str]),
-            ("auth", typing.Optional[str]),
-            ("host", typing.Optional[str]),
-            ("port", typing.Optional[int]),
-            ("path", typing.Optional[str]),
-            ("query", typing.Optional[str]),
-            ("fragment", typing.Optional[str]),
-        ],
-    )
-):
-    """
-    Data structure for representing an HTTP URL. Used as a return value for
-    :func:`parse_url`. Both the scheme and host are normalized as they are
-    both case-insensitive according to RFC 3986.
-    """
-
-    def __new__(  # type: ignore[no-untyped-def]
-        cls,
-        scheme: str | None = None,
-        auth: str | None = None,
-        host: str | None = None,
-        port: int | None = None,
-        path: str | None = None,
-        query: str | None = None,
-        fragment: str | None = None,
-    ):
-        if path and not path.startswith("/"):
-            path = "/" + path
-        if scheme is not None:
-            scheme = scheme.lower()
-        return super().__new__(cls, scheme, auth, host, port, path, query, fragment)
-
-    @property
-    def hostname(self) -> str | None:
-        """For backwards-compatibility with urlparse. We're nice like that."""
-        return self.host
-
-    @property
-    def request_uri(self) -> str:
-        """Absolute path including the query string."""
-        uri = self.path or "/"
-
-        if self.query is not None:
-            uri += "?" + self.query
-
-        return uri
-
-    @property
-    def authority(self) -> str | None:
-        """
-        Authority component as defined in RFC 3986 3.2.
-        This includes userinfo (auth), host and port.
-
-        i.e.
-            userinfo@host:port
-        """
-        userinfo = self.auth
-        netloc = self.netloc
-        if netloc is None or userinfo is None:
-            return netloc
-        else:
-            return f"{userinfo}@{netloc}"
-
-    @property
-    def netloc(self) -> str | None:
-        """
-        Network location including host and port.
-
-        If you need the equivalent of urllib.parse's ``netloc``,
-        use the ``authority`` property instead.
-        """
-        if self.host is None:
-            return None
-        if self.port:
-            return f"{self.host}:{self.port}"
-        return self.host
-
-    @property
-    def url(self) -> str:
-        """
-        Convert self into a url
-
-        This function should more or less round-trip with :func:`.parse_url`. The
-        returned url may not be exactly the same as the url inputted to
-        :func:`.parse_url`, but it should be equivalent by the RFC (e.g., urls
-        with a blank port will have : removed).
-
-        Example:
-
-        .. code-block:: python
-
-            import urllib3
-
-            U = urllib3.util.parse_url("https://google.com/mail/")
-
-            print(U.url)
-            # "https://google.com/mail/"
-
-            print( urllib3.util.Url("https", "username:password",
-                                    "host.com", 80, "/path", "query", "fragment"
-                                    ).url
-                )
-            # "https://username:password@host.com:80/path?query#fragment"
-        """
-        scheme, auth, host, port, path, query, fragment = self
-        url = ""
-
-        # We use "is not None" we want things to happen with empty strings (or 0 port)
-        if scheme is not None:
-            url += scheme + "://"
-        if auth is not None:
-            url += auth + "@"
-        if host is not None:
-            url += host
-        if port is not None:
-            url += ":" + str(port)
-        if path is not None:
-            url += path
-        if query is not None:
-            url += "?" + query
-        if fragment is not None:
-            url += "#" + fragment
-
-        return url
-
-    def __str__(self) -> str:
-        return self.url
-
-
-@typing.overload
-def _encode_invalid_chars(
-    component: str, allowed_chars: typing.Container[str]
-) -> str:  # Abstract
-    ...
-
-
-@typing.overload
-def _encode_invalid_chars(
-    component: None, allowed_chars: typing.Container[str]
-) -> None:  # Abstract
-    ...
-
-
-def _encode_invalid_chars(
-    component: str | None, allowed_chars: typing.Container[str]
-) -> str | None:
-    """Percent-encodes a URI component without reapplying
-    onto an already percent-encoded component.
-    """
-    if component is None:
-        return component
-
-    component = to_str(component)
-
-    # Normalize existing percent-encoded bytes.
-    # Try to see if the component we're encoding is already percent-encoded
-    # so we can skip all '%' characters but still encode all others.
-    component, percent_encodings = _PERCENT_RE.subn(
-        lambda match: match.group(0).upper(), component
-    )
-
-    uri_bytes = component.encode("utf-8", "surrogatepass")
-    is_percent_encoded = percent_encodings == uri_bytes.count(b"%")
-    encoded_component = bytearray()
-
-    for i in range(0, len(uri_bytes)):
-        # Will return a single character bytestring
-        byte = uri_bytes[i : i + 1]
-        byte_ord = ord(byte)
-        if (is_percent_encoded and byte == b"%") or (
-            byte_ord < 128 and byte.decode() in allowed_chars
-        ):
-            encoded_component += byte
-            continue
-        encoded_component.extend(b"%" + (hex(byte_ord)[2:].encode().zfill(2).upper()))
-
-    return encoded_component.decode()
-
-
-def _remove_path_dot_segments(path: str) -> str:
-    # See http://tools.ietf.org/html/rfc3986#section-5.2.4 for pseudo-code
-    segments = path.split("/")  # Turn the path into a list of segments
-    output = []  # Initialize the variable to use to store output
-
-    for segment in segments:
-        # '.' is the current directory, so ignore it, it is superfluous
-        if segment == ".":
-            continue
-        # Anything other than '..', should be appended to the output
-        if segment != "..":
-            output.append(segment)
-        # In this case segment == '..', if we can, we should pop the last
-        # element
-        elif output:
-            output.pop()
-
-    # If the path starts with '/' and the output is empty or the first string
-    # is non-empty
-    if path.startswith("/") and (not output or output[0]):
-        output.insert(0, "")
-
-    # If the path starts with '/.' or '/..' ensure we add one more empty
-    # string to add a trailing '/'
-    if path.endswith(("/.", "/..")):
-        output.append("")
-
-    return "/".join(output)
-
-
-@typing.overload
-def _normalize_host(host: None, scheme: str | None) -> None:
-    ...
-
-
-@typing.overload
-def _normalize_host(host: str, scheme: str | None) -> str:
-    ...
-
-
-def _normalize_host(host: str | None, scheme: str | None) -> str | None:
-    if host:
-        if scheme in _NORMALIZABLE_SCHEMES:
-            is_ipv6 = _IPV6_ADDRZ_RE.match(host)
-            if is_ipv6:
-                # IPv6 hosts of the form 'a::b%zone' are encoded in a URL as
-                # such per RFC 6874: 'a::b%25zone'. Unquote the ZoneID
-                # separator as necessary to return a valid RFC 4007 scoped IP.
-                match = _ZONE_ID_RE.search(host)
-                if match:
-                    start, end = match.span(1)
-                    zone_id = host[start:end]
-
-                    if zone_id.startswith("%25") and zone_id != "%25":
-                        zone_id = zone_id[3:]
-                    else:
-                        zone_id = zone_id[1:]
-                    zone_id = _encode_invalid_chars(zone_id, _UNRESERVED_CHARS)
-                    return f"{host[:start].lower()}%{zone_id}{host[end:]}"
-                else:
-                    return host.lower()
-            elif not _IPV4_RE.match(host):
-                return to_str(
-                    b".".join([_idna_encode(label) for label in host.split(".")]),
-                    "ascii",
-                )
-    return host
-
-
-def _idna_encode(name: str) -> bytes:
-    if not name.isascii():
-        try:
-            import idna
-        except ImportError:
-            raise LocationParseError(
-                "Unable to parse URL without the 'idna' module"
-            ) from None
-
-        try:
-            return idna.encode(name.lower(), strict=True, std3_rules=True)
-        except idna.IDNAError:
-            raise LocationParseError(
-                f"Name '{name}' is not a valid IDNA label"
-            ) from None
-
-    return name.lower().encode("ascii")
-
-
-def _encode_target(target: str) -> str:
-    """Percent-encodes a request target so that there are no invalid characters
-
-    Pre-condition for this function is that 'target' must start with '/'.
-    If that is the case then _TARGET_RE will always produce a match.
-    """
-    match = _TARGET_RE.match(target)
-    if not match:  # Defensive:
-        raise LocationParseError(f"{target!r} is not a valid request URI")
-
-    path, query = match.groups()
-    encoded_target = _encode_invalid_chars(path, _PATH_CHARS)
-    if query is not None:
-        query = _encode_invalid_chars(query, _QUERY_CHARS)
-        encoded_target += "?" + query
-    return encoded_target
-
-
-def parse_url(url: str) -> Url:
-    """
-    Given a url, return a parsed :class:`.Url` namedtuple. Best-effort is
-    performed to parse incomplete urls. Fields not provided will be None.
-    This parser is RFC 3986 and RFC 6874 compliant.
-
-    The parser logic and helper functions are based heavily on
-    work done in the ``rfc3986`` module.
-
-    :param str url: URL to parse into a :class:`.Url` namedtuple.
-
-    Partly backwards-compatible with :mod:`urllib.parse`.
-
-    Example:
-
-    .. code-block:: python
-
-        import urllib3
-
-        print( urllib3.util.parse_url('http://google.com/mail/'))
-        # Url(scheme='http', host='google.com', port=None, path='/mail/', ...)
-
-        print( urllib3.util.parse_url('google.com:80'))
-        # Url(scheme=None, host='google.com', port=80, path=None, ...)
-
-        print( urllib3.util.parse_url('/foo?bar'))
-        # Url(scheme=None, host=None, port=None, path='/foo', query='bar', ...)
-    """
-    if not url:
-        # Empty
-        return Url()
-
-    source_url = url
-    if not _SCHEME_RE.search(url):
-        url = "//" + url
-
-    scheme: str | None
-    authority: str | None
-    auth: str | None
-    host: str | None
-    port: str | None
-    port_int: int | None
-    path: str | None
-    query: str | None
-    fragment: str | None
-
-    try:
-        scheme, authority, path, query, fragment = _URI_RE.match(url).groups()  # type: ignore[union-attr]
-        normalize_uri = scheme is None or scheme.lower() in _NORMALIZABLE_SCHEMES
-
-        if scheme:
-            scheme = scheme.lower()
-
-        if authority:
-            auth, _, host_port = authority.rpartition("@")
-            auth = auth or None
-            host, port = _HOST_PORT_RE.match(host_port).groups()  # type: ignore[union-attr]
-            if auth and normalize_uri:
-                auth = _encode_invalid_chars(auth, _USERINFO_CHARS)
-            if port == "":
-                port = None
-        else:
-            auth, host, port = None, None, None
-
-        if port is not None:
-            port_int = int(port)
-            if not (0 <= port_int <= 65535):
-                raise LocationParseError(url)
-        else:
-            port_int = None
-
-        host = _normalize_host(host, scheme)
-
-        if normalize_uri and path:
-            path = _remove_path_dot_segments(path)
-            path = _encode_invalid_chars(path, _PATH_CHARS)
-        if normalize_uri and query:
-            query = _encode_invalid_chars(query, _QUERY_CHARS)
-        if normalize_uri and fragment:
-            fragment = _encode_invalid_chars(fragment, _FRAGMENT_CHARS)
-
-    except (ValueError, AttributeError) as e:
-        raise LocationParseError(source_url) from e
-
-    # For the sake of backwards compatibility we put empty
-    # string values for path if there are any defined values
-    # beyond the path in the URL.
-    # TODO: Remove this when we break backwards compatibility.
-    if not path:
-        if query is not None or fragment is not None:
-            path = ""
-        else:
-            path = None
-
-    return Url(
-        scheme=scheme,
-        auth=auth,
-        host=host,
-        port=port_int,
-        path=path,
-        query=query,
-        fragment=fragment,
-    )

build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/vendor/urllib3/util/util.py

@@ -1,42 +0,0 @@
-from __future__ import annotations
-
-import typing
-from types import TracebackType
-
-
-def to_bytes(
-    x: str | bytes, encoding: str | None = None, errors: str | None = None
-) -> bytes:
-    if isinstance(x, bytes):
-        return x
-    elif not isinstance(x, str):
-        raise TypeError(f"not expecting type {type(x).__name__}")
-    if encoding or errors:
-        return x.encode(encoding or "utf-8", errors=errors or "strict")
-    return x.encode()
-
-
-def to_str(
-    x: str | bytes, encoding: str | None = None, errors: str | None = None
-) -> str:
-    if isinstance(x, str):
-        return x
-    elif not isinstance(x, bytes):
-        raise TypeError(f"not expecting type {type(x).__name__}")
-    if encoding or errors:
-        return x.decode(encoding or "utf-8", errors=errors or "strict")
-    return x.decode()
-
-
-def reraise(
-    tp: type[BaseException] | None,
-    value: BaseException,
-    tb: TracebackType | None = None,
-) -> typing.NoReturn:
-    try:
-        if value.__traceback__ is not tb:
-            raise value.with_traceback(tb)
-        raise value
-    finally:
-        value = None  # type: ignore[assignment]
-        tb = None

build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/build/lib/vendor/urllib3/util/wait.py

@@ -1,124 +0,0 @@
-from __future__ import annotations
-
-import select
-import socket
-from functools import partial
-
-__all__ = ["wait_for_read", "wait_for_write"]
-
-
-# How should we wait on sockets?
-#
-# There are two types of APIs you can use for waiting on sockets: the fancy
-# modern stateful APIs like epoll/kqueue, and the older stateless APIs like
-# select/poll. The stateful APIs are more efficient when you have a lots of
-# sockets to keep track of, because you can set them up once and then use them
-# lots of times. But we only ever want to wait on a single socket at a time
-# and don't want to keep track of state, so the stateless APIs are actually
-# more efficient. So we want to use select() or poll().
-#
-# Now, how do we choose between select() and poll()? On traditional Unixes,
-# select() has a strange calling convention that makes it slow, or fail
-# altogether, for high-numbered file descriptors. The point of poll() is to fix
-# that, so on Unixes, we prefer poll().
-#
-# On Windows, there is no poll() (or at least Python doesn't provide a wrapper
-# for it), but that's OK, because on Windows, select() doesn't have this
-# strange calling convention; plain select() works fine.
-#
-# So: on Windows we use select(), and everywhere else we use poll(). We also
-# fall back to select() in case poll() is somehow broken or missing.
-
-
-def select_wait_for_socket(
-    sock: socket.socket,
-    read: bool = False,
-    write: bool = False,
-    timeout: float | None = None,
-) -> bool:
-    if not read and not write:
-        raise RuntimeError("must specify at least one of read=True, write=True")
-    rcheck = []
-    wcheck = []
-    if read:
-        rcheck.append(sock)
-    if write:
-        wcheck.append(sock)
-    # When doing a non-blocking connect, most systems signal success by
-    # marking the socket writable. Windows, though, signals success by marked
-    # it as "exceptional". We paper over the difference by checking the write
-    # sockets for both conditions. (The stdlib selectors module does the same
-    # thing.)
-    fn = partial(select.select, rcheck, wcheck, wcheck)
-    rready, wready, xready = fn(timeout)
-    return bool(rready or wready or xready)
-
-
-def poll_wait_for_socket(
-    sock: socket.socket,
-    read: bool = False,
-    write: bool = False,
-    timeout: float | None = None,
-) -> bool:
-    if not read and not write:
-        raise RuntimeError("must specify at least one of read=True, write=True")
-    mask = 0
-    if read:
-        mask |= select.POLLIN
-    if write:
-        mask |= select.POLLOUT
-    poll_obj = select.poll()
-    poll_obj.register(sock, mask)
-
-    # For some reason, poll() takes timeout in milliseconds
-    def do_poll(t: float | None) -> list[tuple[int, int]]:
-        if t is not None:
-            t *= 1000
-        return poll_obj.poll(t)
-
-    return bool(do_poll(timeout))
-
-
-def _have_working_poll() -> bool:
-    # Apparently some systems have a select.poll that fails as soon as you try
-    # to use it, either due to strange configuration or broken monkeypatching
-    # from libraries like eventlet/greenlet.
-    try:
-        poll_obj = select.poll()
-        poll_obj.poll(0)
-    except (AttributeError, OSError):
-        return False
-    else:
-        return True
-
-
-def wait_for_socket(
-    sock: socket.socket,
-    read: bool = False,
-    write: bool = False,
-    timeout: float | None = None,
-) -> bool:
-    # We delay choosing which implementation to use until the first time we're
-    # called. We could do it at import time, but then we might make the wrong
-    # decision if someone goes wild with monkeypatching select.poll after
-    # we're imported.
-    global wait_for_socket
-    if _have_working_poll():
-        wait_for_socket = poll_wait_for_socket
-    elif hasattr(select, "select"):
-        wait_for_socket = select_wait_for_socket
-    return wait_for_socket(sock, read, write, timeout)
-
-
-def wait_for_read(sock: socket.socket, timeout: float | None = None) -> bool:
-    """Waits for reading to be available on a given socket.
-    Returns True if the socket is readable, or False if the timeout expired.
-    """
-    return wait_for_socket(sock, read=True, timeout=timeout)
-
-
-def wait_for_write(sock: socket.socket, timeout: float | None = None) -> bool:
-    """Waits for writing to be available on a given socket.
-    Returns True if the socket is readable, or False if the timeout expired.
-    """
-    return wait_for_socket(sock, write=True, timeout=timeout)