catocli 1.0.1__py3-none-any.whl

build/lib/vendor/urllib3/util/url.py

@@ -0,0 +1,471 @@
+from __future__ import annotations
+
+import re
+import typing
+
+from ..exceptions import LocationParseError
+from .util import to_str
+
+# We only want to normalize urls with an HTTP(S) scheme.
+# urllib3 infers URLs without a scheme (None) to be http.
+_NORMALIZABLE_SCHEMES = ("http", "https", None)
+
+# Almost all of these patterns were derived from the
+# 'rfc3986' module: https://github.com/python-hyper/rfc3986
+_PERCENT_RE = re.compile(r"%[a-fA-F0-9]{2}")
+_SCHEME_RE = re.compile(r"^(?:[a-zA-Z][a-zA-Z0-9+-]*:|/)")
+_URI_RE = re.compile(
+    r"^(?:([a-zA-Z][a-zA-Z0-9+.-]*):)?"
+    r"(?://([^\\/?#]*))?"
+    r"([^?#]*)"
+    r"(?:\?([^#]*))?"
+    r"(?:#(.*))?$",
+    re.UNICODE | re.DOTALL,
+)
+
+_IPV4_PAT = r"(?:[0-9]{1,3}\.){3}[0-9]{1,3}"
+_HEX_PAT = "[0-9A-Fa-f]{1,4}"
+_LS32_PAT = "(?:{hex}:{hex}|{ipv4})".format(hex=_HEX_PAT, ipv4=_IPV4_PAT)
+_subs = {"hex": _HEX_PAT, "ls32": _LS32_PAT}
+_variations = [
+    #                            6( h16 ":" ) ls32
+    "(?:%(hex)s:){6}%(ls32)s",
+    #                       "::" 5( h16 ":" ) ls32
+    "::(?:%(hex)s:){5}%(ls32)s",
+    # [               h16 ] "::" 4( h16 ":" ) ls32
+    "(?:%(hex)s)?::(?:%(hex)s:){4}%(ls32)s",
+    # [ *1( h16 ":" ) h16 ] "::" 3( h16 ":" ) ls32
+    "(?:(?:%(hex)s:)?%(hex)s)?::(?:%(hex)s:){3}%(ls32)s",
+    # [ *2( h16 ":" ) h16 ] "::" 2( h16 ":" ) ls32
+    "(?:(?:%(hex)s:){0,2}%(hex)s)?::(?:%(hex)s:){2}%(ls32)s",
+    # [ *3( h16 ":" ) h16 ] "::"    h16 ":"   ls32
+    "(?:(?:%(hex)s:){0,3}%(hex)s)?::%(hex)s:%(ls32)s",
+    # [ *4( h16 ":" ) h16 ] "::"              ls32
+    "(?:(?:%(hex)s:){0,4}%(hex)s)?::%(ls32)s",
+    # [ *5( h16 ":" ) h16 ] "::"              h16
+    "(?:(?:%(hex)s:){0,5}%(hex)s)?::%(hex)s",
+    # [ *6( h16 ":" ) h16 ] "::"
+    "(?:(?:%(hex)s:){0,6}%(hex)s)?::",
+]
+
+_UNRESERVED_PAT = r"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789._\-~"
+_IPV6_PAT = "(?:" + "|".join([x % _subs for x in _variations]) + ")"
+_ZONE_ID_PAT = "(?:%25|%)(?:[" + _UNRESERVED_PAT + "]|%[a-fA-F0-9]{2})+"
+_IPV6_ADDRZ_PAT = r"\[" + _IPV6_PAT + r"(?:" + _ZONE_ID_PAT + r")?\]"
+_REG_NAME_PAT = r"(?:[^\[\]%:/?#]|%[a-fA-F0-9]{2})*"
+_TARGET_RE = re.compile(r"^(/[^?#]*)(?:\?([^#]*))?(?:#.*)?$")
+
+_IPV4_RE = re.compile("^" + _IPV4_PAT + "$")
+_IPV6_RE = re.compile("^" + _IPV6_PAT + "$")
+_IPV6_ADDRZ_RE = re.compile("^" + _IPV6_ADDRZ_PAT + "$")
+_BRACELESS_IPV6_ADDRZ_RE = re.compile("^" + _IPV6_ADDRZ_PAT[2:-2] + "$")
+_ZONE_ID_RE = re.compile("(" + _ZONE_ID_PAT + r")\]$")
+
+_HOST_PORT_PAT = ("^(%s|%s|%s)(?::0*?(|0|[1-9][0-9]{0,4}))?$") % (
+    _REG_NAME_PAT,
+    _IPV4_PAT,
+    _IPV6_ADDRZ_PAT,
+)
+_HOST_PORT_RE = re.compile(_HOST_PORT_PAT, re.UNICODE | re.DOTALL)
+
+_UNRESERVED_CHARS = set(
+    "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789._-~"
+)
+_SUB_DELIM_CHARS = set("!$&'()*+,;=")
+_USERINFO_CHARS = _UNRESERVED_CHARS | _SUB_DELIM_CHARS | {":"}
+_PATH_CHARS = _USERINFO_CHARS | {"@", "/"}
+_QUERY_CHARS = _FRAGMENT_CHARS = _PATH_CHARS | {"?"}
+
+
+class Url(
+    typing.NamedTuple(
+        "Url",
+        [
+            ("scheme", typing.Optional[str]),
+            ("auth", typing.Optional[str]),
+            ("host", typing.Optional[str]),
+            ("port", typing.Optional[int]),
+            ("path", typing.Optional[str]),
+            ("query", typing.Optional[str]),
+            ("fragment", typing.Optional[str]),
+        ],
+    )
+):
+    """
+    Data structure for representing an HTTP URL. Used as a return value for
+    :func:`parse_url`. Both the scheme and host are normalized as they are
+    both case-insensitive according to RFC 3986.
+    """
+
+    def __new__(  # type: ignore[no-untyped-def]
+        cls,
+        scheme: str | None = None,
+        auth: str | None = None,
+        host: str | None = None,
+        port: int | None = None,
+        path: str | None = None,
+        query: str | None = None,
+        fragment: str | None = None,
+    ):
+        if path and not path.startswith("/"):
+            path = "/" + path
+        if scheme is not None:
+            scheme = scheme.lower()
+        return super().__new__(cls, scheme, auth, host, port, path, query, fragment)
+
+    @property
+    def hostname(self) -> str | None:
+        """For backwards-compatibility with urlparse. We're nice like that."""
+        return self.host
+
+    @property
+    def request_uri(self) -> str:
+        """Absolute path including the query string."""
+        uri = self.path or "/"
+
+        if self.query is not None:
+            uri += "?" + self.query
+
+        return uri
+
+    @property
+    def authority(self) -> str | None:
+        """
+        Authority component as defined in RFC 3986 3.2.
+        This includes userinfo (auth), host and port.
+
+        i.e.
+            userinfo@host:port
+        """
+        userinfo = self.auth
+        netloc = self.netloc
+        if netloc is None or userinfo is None:
+            return netloc
+        else:
+            return f"{userinfo}@{netloc}"
+
+    @property
+    def netloc(self) -> str | None:
+        """
+        Network location including host and port.
+
+        If you need the equivalent of urllib.parse's ``netloc``,
+        use the ``authority`` property instead.
+        """
+        if self.host is None:
+            return None
+        if self.port:
+            return f"{self.host}:{self.port}"
+        return self.host
+
+    @property
+    def url(self) -> str:
+        """
+        Convert self into a url
+
+        This function should more or less round-trip with :func:`.parse_url`. The
+        returned url may not be exactly the same as the url inputted to
+        :func:`.parse_url`, but it should be equivalent by the RFC (e.g., urls
+        with a blank port will have : removed).
+
+        Example:
+
+        .. code-block:: python
+
+            import urllib3
+
+            U = urllib3.util.parse_url("https://google.com/mail/")
+
+            print(U.url)
+            # "https://google.com/mail/"
+
+            print( urllib3.util.Url("https", "username:password",
+                                    "host.com", 80, "/path", "query", "fragment"
+                                    ).url
+                )
+            # "https://username:password@host.com:80/path?query#fragment"
+        """
+        scheme, auth, host, port, path, query, fragment = self
+        url = ""
+
+        # We use "is not None" we want things to happen with empty strings (or 0 port)
+        if scheme is not None:
+            url += scheme + "://"
+        if auth is not None:
+            url += auth + "@"
+        if host is not None:
+            url += host
+        if port is not None:
+            url += ":" + str(port)
+        if path is not None:
+            url += path
+        if query is not None:
+            url += "?" + query
+        if fragment is not None:
+            url += "#" + fragment
+
+        return url
+
+    def __str__(self) -> str:
+        return self.url
+
+
+@typing.overload
+def _encode_invalid_chars(
+    component: str, allowed_chars: typing.Container[str]
+) -> str:  # Abstract
+    ...
+
+
+@typing.overload
+def _encode_invalid_chars(
+    component: None, allowed_chars: typing.Container[str]
+) -> None:  # Abstract
+    ...
+
+
+def _encode_invalid_chars(
+    component: str | None, allowed_chars: typing.Container[str]
+) -> str | None:
+    """Percent-encodes a URI component without reapplying
+    onto an already percent-encoded component.
+    """
+    if component is None:
+        return component
+
+    component = to_str(component)
+
+    # Normalize existing percent-encoded bytes.
+    # Try to see if the component we're encoding is already percent-encoded
+    # so we can skip all '%' characters but still encode all others.
+    component, percent_encodings = _PERCENT_RE.subn(
+        lambda match: match.group(0).upper(), component
+    )
+
+    uri_bytes = component.encode("utf-8", "surrogatepass")
+    is_percent_encoded = percent_encodings == uri_bytes.count(b"%")
+    encoded_component = bytearray()
+
+    for i in range(0, len(uri_bytes)):
+        # Will return a single character bytestring
+        byte = uri_bytes[i : i + 1]
+        byte_ord = ord(byte)
+        if (is_percent_encoded and byte == b"%") or (
+            byte_ord < 128 and byte.decode() in allowed_chars
+        ):
+            encoded_component += byte
+            continue
+        encoded_component.extend(b"%" + (hex(byte_ord)[2:].encode().zfill(2).upper()))
+
+    return encoded_component.decode()
+
+
+def _remove_path_dot_segments(path: str) -> str:
+    # See http://tools.ietf.org/html/rfc3986#section-5.2.4 for pseudo-code
+    segments = path.split("/")  # Turn the path into a list of segments
+    output = []  # Initialize the variable to use to store output
+
+    for segment in segments:
+        # '.' is the current directory, so ignore it, it is superfluous
+        if segment == ".":
+            continue
+        # Anything other than '..', should be appended to the output
+        if segment != "..":
+            output.append(segment)
+        # In this case segment == '..', if we can, we should pop the last
+        # element
+        elif output:
+            output.pop()
+
+    # If the path starts with '/' and the output is empty or the first string
+    # is non-empty
+    if path.startswith("/") and (not output or output[0]):
+        output.insert(0, "")
+
+    # If the path starts with '/.' or '/..' ensure we add one more empty
+    # string to add a trailing '/'
+    if path.endswith(("/.", "/..")):
+        output.append("")
+
+    return "/".join(output)
+
+
+@typing.overload
+def _normalize_host(host: None, scheme: str | None) -> None:
+    ...
+
+
+@typing.overload
+def _normalize_host(host: str, scheme: str | None) -> str:
+    ...
+
+
+def _normalize_host(host: str | None, scheme: str | None) -> str | None:
+    if host:
+        if scheme in _NORMALIZABLE_SCHEMES:
+            is_ipv6 = _IPV6_ADDRZ_RE.match(host)
+            if is_ipv6:
+                # IPv6 hosts of the form 'a::b%zone' are encoded in a URL as
+                # such per RFC 6874: 'a::b%25zone'. Unquote the ZoneID
+                # separator as necessary to return a valid RFC 4007 scoped IP.
+                match = _ZONE_ID_RE.search(host)
+                if match:
+                    start, end = match.span(1)
+                    zone_id = host[start:end]
+
+                    if zone_id.startswith("%25") and zone_id != "%25":
+                        zone_id = zone_id[3:]
+                    else:
+                        zone_id = zone_id[1:]
+                    zone_id = _encode_invalid_chars(zone_id, _UNRESERVED_CHARS)
+                    return f"{host[:start].lower()}%{zone_id}{host[end:]}"
+                else:
+                    return host.lower()
+            elif not _IPV4_RE.match(host):
+                return to_str(
+                    b".".join([_idna_encode(label) for label in host.split(".")]),
+                    "ascii",
+                )
+    return host
+
+
+def _idna_encode(name: str) -> bytes:
+    if not name.isascii():
+        try:
+            import idna
+        except ImportError:
+            raise LocationParseError(
+                "Unable to parse URL without the 'idna' module"
+            ) from None
+
+        try:
+            return idna.encode(name.lower(), strict=True, std3_rules=True)
+        except idna.IDNAError:
+            raise LocationParseError(
+                f"Name '{name}' is not a valid IDNA label"
+            ) from None
+
+    return name.lower().encode("ascii")
+
+
+def _encode_target(target: str) -> str:
+    """Percent-encodes a request target so that there are no invalid characters
+
+    Pre-condition for this function is that 'target' must start with '/'.
+    If that is the case then _TARGET_RE will always produce a match.
+    """
+    match = _TARGET_RE.match(target)
+    if not match:  # Defensive:
+        raise LocationParseError(f"{target!r} is not a valid request URI")
+
+    path, query = match.groups()
+    encoded_target = _encode_invalid_chars(path, _PATH_CHARS)
+    if query is not None:
+        query = _encode_invalid_chars(query, _QUERY_CHARS)
+        encoded_target += "?" + query
+    return encoded_target
+
+
+def parse_url(url: str) -> Url:
+    """
+    Given a url, return a parsed :class:`.Url` namedtuple. Best-effort is
+    performed to parse incomplete urls. Fields not provided will be None.
+    This parser is RFC 3986 and RFC 6874 compliant.
+
+    The parser logic and helper functions are based heavily on
+    work done in the ``rfc3986`` module.
+
+    :param str url: URL to parse into a :class:`.Url` namedtuple.
+
+    Partly backwards-compatible with :mod:`urllib.parse`.
+
+    Example:
+
+    .. code-block:: python
+
+        import urllib3
+
+        print( urllib3.util.parse_url('http://google.com/mail/'))
+        # Url(scheme='http', host='google.com', port=None, path='/mail/', ...)
+
+        print( urllib3.util.parse_url('google.com:80'))
+        # Url(scheme=None, host='google.com', port=80, path=None, ...)
+
+        print( urllib3.util.parse_url('/foo?bar'))
+        # Url(scheme=None, host=None, port=None, path='/foo', query='bar', ...)
+    """
+    if not url:
+        # Empty
+        return Url()
+
+    source_url = url
+    if not _SCHEME_RE.search(url):
+        url = "//" + url
+
+    scheme: str | None
+    authority: str | None
+    auth: str | None
+    host: str | None
+    port: str | None
+    port_int: int | None
+    path: str | None
+    query: str | None
+    fragment: str | None
+
+    try:
+        scheme, authority, path, query, fragment = _URI_RE.match(url).groups()  # type: ignore[union-attr]
+        normalize_uri = scheme is None or scheme.lower() in _NORMALIZABLE_SCHEMES
+
+        if scheme:
+            scheme = scheme.lower()
+
+        if authority:
+            auth, _, host_port = authority.rpartition("@")
+            auth = auth or None
+            host, port = _HOST_PORT_RE.match(host_port).groups()  # type: ignore[union-attr]
+            if auth and normalize_uri:
+                auth = _encode_invalid_chars(auth, _USERINFO_CHARS)
+            if port == "":
+                port = None
+        else:
+            auth, host, port = None, None, None
+
+        if port is not None:
+            port_int = int(port)
+            if not (0 <= port_int <= 65535):
+                raise LocationParseError(url)
+        else:
+            port_int = None
+
+        host = _normalize_host(host, scheme)
+
+        if normalize_uri and path:
+            path = _remove_path_dot_segments(path)
+            path = _encode_invalid_chars(path, _PATH_CHARS)
+        if normalize_uri and query:
+            query = _encode_invalid_chars(query, _QUERY_CHARS)
+        if normalize_uri and fragment:
+            fragment = _encode_invalid_chars(fragment, _FRAGMENT_CHARS)
+
+    except (ValueError, AttributeError) as e:
+        raise LocationParseError(source_url) from e
+
+    # For the sake of backwards compatibility we put empty
+    # string values for path if there are any defined values
+    # beyond the path in the URL.
+    # TODO: Remove this when we break backwards compatibility.
+    if not path:
+        if query is not None or fragment is not None:
+            path = ""
+        else:
+            path = None
+
+    return Url(
+        scheme=scheme,
+        auth=auth,
+        host=host,
+        port=port_int,
+        path=path,
+        query=query,
+        fragment=fragment,
+    )

build/lib/vendor/urllib3/util/util.py

@@ -0,0 +1,42 @@
+from __future__ import annotations
+
+import typing
+from types import TracebackType
+
+
+def to_bytes(
+    x: str | bytes, encoding: str | None = None, errors: str | None = None
+) -> bytes:
+    if isinstance(x, bytes):
+        return x
+    elif not isinstance(x, str):
+        raise TypeError(f"not expecting type {type(x).__name__}")
+    if encoding or errors:
+        return x.encode(encoding or "utf-8", errors=errors or "strict")
+    return x.encode()
+
+
+def to_str(
+    x: str | bytes, encoding: str | None = None, errors: str | None = None
+) -> str:
+    if isinstance(x, str):
+        return x
+    elif not isinstance(x, bytes):
+        raise TypeError(f"not expecting type {type(x).__name__}")
+    if encoding or errors:
+        return x.decode(encoding or "utf-8", errors=errors or "strict")
+    return x.decode()
+
+
+def reraise(
+    tp: type[BaseException] | None,
+    value: BaseException,
+    tb: TracebackType | None = None,
+) -> typing.NoReturn:
+    try:
+        if value.__traceback__ is not tb:
+            raise value.with_traceback(tb)
+        raise value
+    finally:
+        value = None  # type: ignore[assignment]
+        tb = None

build/lib/vendor/urllib3/util/wait.py

@@ -0,0 +1,124 @@
+from __future__ import annotations
+
+import select
+import socket
+from functools import partial
+
+__all__ = ["wait_for_read", "wait_for_write"]
+
+
+# How should we wait on sockets?
+#
+# There are two types of APIs you can use for waiting on sockets: the fancy
+# modern stateful APIs like epoll/kqueue, and the older stateless APIs like
+# select/poll. The stateful APIs are more efficient when you have a lots of
+# sockets to keep track of, because you can set them up once and then use them
+# lots of times. But we only ever want to wait on a single socket at a time
+# and don't want to keep track of state, so the stateless APIs are actually
+# more efficient. So we want to use select() or poll().
+#
+# Now, how do we choose between select() and poll()? On traditional Unixes,
+# select() has a strange calling convention that makes it slow, or fail
+# altogether, for high-numbered file descriptors. The point of poll() is to fix
+# that, so on Unixes, we prefer poll().
+#
+# On Windows, there is no poll() (or at least Python doesn't provide a wrapper
+# for it), but that's OK, because on Windows, select() doesn't have this
+# strange calling convention; plain select() works fine.
+#
+# So: on Windows we use select(), and everywhere else we use poll(). We also
+# fall back to select() in case poll() is somehow broken or missing.
+
+
+def select_wait_for_socket(
+    sock: socket.socket,
+    read: bool = False,
+    write: bool = False,
+    timeout: float | None = None,
+) -> bool:
+    if not read and not write:
+        raise RuntimeError("must specify at least one of read=True, write=True")
+    rcheck = []
+    wcheck = []
+    if read:
+        rcheck.append(sock)
+    if write:
+        wcheck.append(sock)
+    # When doing a non-blocking connect, most systems signal success by
+    # marking the socket writable. Windows, though, signals success by marked
+    # it as "exceptional". We paper over the difference by checking the write
+    # sockets for both conditions. (The stdlib selectors module does the same
+    # thing.)
+    fn = partial(select.select, rcheck, wcheck, wcheck)
+    rready, wready, xready = fn(timeout)
+    return bool(rready or wready or xready)
+
+
+def poll_wait_for_socket(
+    sock: socket.socket,
+    read: bool = False,
+    write: bool = False,
+    timeout: float | None = None,
+) -> bool:
+    if not read and not write:
+        raise RuntimeError("must specify at least one of read=True, write=True")
+    mask = 0
+    if read:
+        mask |= select.POLLIN
+    if write:
+        mask |= select.POLLOUT
+    poll_obj = select.poll()
+    poll_obj.register(sock, mask)
+
+    # For some reason, poll() takes timeout in milliseconds
+    def do_poll(t: float | None) -> list[tuple[int, int]]:
+        if t is not None:
+            t *= 1000
+        return poll_obj.poll(t)
+
+    return bool(do_poll(timeout))
+
+
+def _have_working_poll() -> bool:
+    # Apparently some systems have a select.poll that fails as soon as you try
+    # to use it, either due to strange configuration or broken monkeypatching
+    # from libraries like eventlet/greenlet.
+    try:
+        poll_obj = select.poll()
+        poll_obj.poll(0)
+    except (AttributeError, OSError):
+        return False
+    else:
+        return True
+
+
+def wait_for_socket(
+    sock: socket.socket,
+    read: bool = False,
+    write: bool = False,
+    timeout: float | None = None,
+) -> bool:
+    # We delay choosing which implementation to use until the first time we're
+    # called. We could do it at import time, but then we might make the wrong
+    # decision if someone goes wild with monkeypatching select.poll after
+    # we're imported.
+    global wait_for_socket
+    if _have_working_poll():
+        wait_for_socket = poll_wait_for_socket
+    elif hasattr(select, "select"):
+        wait_for_socket = select_wait_for_socket
+    return wait_for_socket(sock, read, write, timeout)
+
+
+def wait_for_read(sock: socket.socket, timeout: float | None = None) -> bool:
+    """Waits for reading to be available on a given socket.
+    Returns True if the socket is readable, or False if the timeout expired.
+    """
+    return wait_for_socket(sock, read=True, timeout=timeout)
+
+
+def wait_for_write(sock: socket.socket, timeout: float | None = None) -> bool:
+    """Waits for writing to be available on a given socket.
+    Returns True if the socket is readable, or False if the timeout expired.
+    """
+    return wait_for_socket(sock, write=True, timeout=timeout)